Yamaha SH2 Инструкция по применению

IT

DE

KO

ES

FR

EN

SH2

Owner’s Manual

Mode d’emploi

Manual de instrucciones

Bedienungsanleitung

Manuale di istruzioni

툲󻼰튪찋튢

Before using the instrument, be sure to read “PRECAUTIONS” on pages 7-8.

Avant d’utiliser cet instrument, lisez attentivement la section « PRÉCAUTIONS D’USAGE » aux pages 7-8.

Antes de utilizar el instrumento, lea la sección “PRECAUCIONES”, en las páginas 7-8.

Achten Sie darauf, vor Einsatz dieses Instruments die „VORSICHTSMASSNAHMEN“ auf Seiten 7-8 durchzulesen.

Prima di utilizzare lo strumento, assicurarsi di leggere la sezione “PRECAUZIONI”, alle pagine 7 - 8.

훋뾶쬂툲󻼰뾶󼂋흖ˊ󻿻󼉇󻿟훎󼂋󼆃󻿟툲󻿋삳󼀄󻿃푳푢힪

2

SH2 Owner’s Manual

For the instrument

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply or

adapter other than one described in the manual, on the name

plate, or specifically recommended by Yamaha.

WARNING: Do not place this product in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the mini-

mum wire size for a 25’ cord (or less) is 18 AWG. NOTE: The

smaller the AWG number, the larger the current handling capac-

ity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied

or; a cart, rack, or stand that is recommended by Yamaha. If a

cart, etc., is used, please observe all safety markings and

instructions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be cor-

rect at the time of printing. However, Yamaha reserves the right

to change or modify any of the specifications without notice or

obligation to update existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound

levels that could cause permanent hearing loss. DO NOT oper-

ate for long periods of time at a high volume level or at a level

that is uncomfortable. If you experience any hearing loss or ring-

ing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be

dealer assembled or installed. Please make sure that benches

are stable and any optional fixtures (where applicable) are well

secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No

other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty, and

are therefore the owners responsibility. Please study this manual

carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and

environmentally friendly. We sincerely believe that our products

and the production methods used to produce them, meet these

goals. In keeping with both the letter and the spirit of the law, we

want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life span

of this type of battery is approximately five years. When replace-

ment becomes necessary, contact a qualified service represen-

tative to perform the replacement.

This product may also use “household” type batteries. Some of

these may be rechargeable. Make sure that the battery being

charged is a rechargeable type and that the charger is intended

for the battery being charged.

When installing batteries, never mix old batteries with new ones,

and never mix different types of batteries. Batteries MUST be

installed correctly. Mismatches or incorrect installation may

result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep

all batteries away from children. Dispose of used batteries

promptly and as regulated by the laws in your area. Note: Check

with any retailer of household type batteries in your area for bat-

tery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end, please

observe all local, state, and federal regulations that relate to the

disposal of products that contain lead, batteries, plastics, etc. If

your dealer is unable to assist you, please contact Yamaha

directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, power requirements, etc., are located on this

plate. The serial number is located behind the control unit. You

should record the model number, serial number, and the date of

purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom_silent)

3

SH2 Owner’s Manual

For the instrument

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

COMPLIANCE INFORMATION STATEMENT(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party: Yamaha Corporation of America

Address: 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone: 714-522-9011

Type of Equipment: Silent Piano

Model Name: C1XSH2, C2XSH2, C3XSH2, C5XSH2, C6XSH2, C7XSH2,

GC1MSH2, GC2SH2, S3XSH2, S5XSH2, S6XSH2, S7XSH2,

U1SH2, U3SH2, YUS1SH2, YUS3SH2, YUS5SH2

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may cause undesired operation.

See user manual instructions if interference to radio reception is suspected.

(FCC DoC)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifica-

tions not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could

void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these require-

ments provides a reasonable level of assurance that your

use of this product in a residential environment will not result

in harmful interference with other electronic devices. This

equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the opera-

tion of other electronic devices. Compliance with FCC regula-

tions does not guarantee that interference will not occur in all

installations. If this product is found to be the source of inter-

ference, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using one of

the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distrib-

ute this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America,

Electronic Service Division, 6600 Orangethorpe Ave, Buena

Park, CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

For the AC adaptor and the instrument

4

SH2 Owner’s Manual

The model number, power requirements, etc., are located on the

name plate, which is at the bottom of the control unit. The serial num-

ber is located behind the control unit. You should note this serial num-

ber in the space provided below and retain this manual as a

permanent record of your purchase to aid identification in the event of

theft.

Model No.

Serial No.

(bottom_en_silent)

The name plate is located on the bottom of the unit.

La plaque signalétique de ce produit se trouve dans le bas de l'unité.

La placa del nombre se encuentra en la parte inferior de la unidad.

Das Namensschild befindet sich an der Unterseite des Produkts.

La targhetta del nome si trova sul fondo dell'unità.

명판은 제품 밑면에 부착되어 있습니다 .

Le numéro de modèle de l'appareil, ses besoins en alimentation ainsi

que d'autres informations le concernant figurent sur sa plaque

signalétique, qui se trouve en bas de l'unité de commande. Le numéro

de série est indiqué à l’arrière de l’unité de commande. Notez ce

numéro de série dans l'espace fourni ci-dessous et conservez le

présent manuel comme preuve permanente de votre achat afin de

faciliter l'identification du produit en cas de vol.

N° de modèle

N° de série

(bottom_fr_silent)

El número de modelo, los requisitos de alimentación, etc. se

encuentran en la placa de denominación, que está en la parte inferior

de la unidad de control. El número de serie se encuentra detrás de la

unidad de control. Debe anotar este número de serie en el espacio

que se proporciona a continuación y conservar este manual como un

registro permanente de su compra para facilitar la identificación en

caso de robo.

Nº de modelo

Nº de serie

(bottom_es_silent)

Modellnummer, Leistungsbedarf usw. sind auf dem Namensschild

aufgeführt, das sich an der Unterseite der Steuereinheit befindet. Die

Seriennummer befindet sich an der Rückseite der Steuereinheit. Für

den Fall eines Diebstahls sollten Sie diese Seriennummer im unten

vorgesehenen Feld eintragen und diese Anleitung als dauerhaften

Kaufnachweis aufbewahren.

Modell Nr.

Seriennr.

(bottom_de_silent)

Il numero del modello, i requisiti di alimentazione, ecc… si trovano

sulla piastrina posizionata nella parte inferiore dell'unità di controllo. Il

numero di serie si trova dietro l'unità di controllo. Si consiglia di

riportare il numero di serie nell'apposito spazio di seguito e di

conservare questo manuale come prova di acquisto permanente, al

fine di consentire l'identificazione in caso di furto.

Numero del modello

Numero di serie

(bottom_it_silent)

본 제품의 모델 번호 , 전원 규격 등은 기기 밑면에 있는

명판에서 확인할 수 있습니다 . 일련 번호는 기기 후면에

있습니다 . 도난 시 확인할 수 있도록 일련 번호를 아래 공란에

기입하고 본 사용설명서를 구매 기록으로 영구 보관해야

합니다 .

모델 번호

일련 번호

(bottom_ko_silent)

5

SH2 Owner’s Manual

English

Table of Contents

PRECAUTIONS...........................................................7

NOTICE ........................................................................9

About the Manuals ....................................................10

Included Accessories .................................................10

Features........................................................................11

Chapter 1 Getting Started ................... 12

Part names and functions .........................................12

Turning the power on/off .........................................15

Using headphones......................................................16

Chapter 2 Playing with the Silent Piano™

Function.............................. 17

Using the Silent Piano™ function .............................17

Selecting Voices..........................................................18

Chapter 3 Playing Back and Recording

Songs................................... 20

Playing back Songs.....................................................20

Recording your performance ...................................24

Handling User Song files...........................................27

Chapter 4 Using Convenient Functions

(UTILITY) .......................... 30

Enhancing the sound with Reverb...........................30

Using the metronome................................................32

Customizing with the various Function parameters

(Function settings).....................................................34

Chapter 5 Connecting to Other Devices

............................................. 45

Connecting USB devices...........................................45

Connecting to external audio devices ..................... 47

Connecting to external MIDI devices.....................49

Connecting to a computer/smart device ................50

Chapter 6 Using Other Functions....... 54

Backup data and initialization..................................54

Setting the Character Code for file names..............55

Chapter 7 Appendix ............................ 56

Message List................................................................56

Troubleshooting.........................................................58

Voice List.....................................................................60

Song List......................................................................62

Playback sequence of Song files in a USB flash drive

......................................................................................64

Specifications..............................................................65

Index ............................................................................67

SH2

Owner’s Manual

6

SH2 Owner’s Manual

(weee_eu_en_02)

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should

not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your

national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service

or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and

ask for the correct method of disposal.

For the AC adaptor

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

(can_b_02)

CAN ICES-3 (B)/NMB-3(B)

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol within

an equilateral triangle is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use caution

when moving the cart/apparatus

combination to avoid injury from

tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

7

SH2 Owner’s Manual

English

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic

devices. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If

some trouble or malfunction occurs, immediately turn off the power

switch of the instrument and disconnect the AC adaptor from the

outlet. When the AC adaptor is connected to the AC outlet, keep in

mind that electricity is flowing at the minimum level, even if the

power switch is turned off. When you are not using the instrument

for a long time, make sure to unplug the power cord from the wall

AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the

cord, or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 66) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust

which may have accumulated on it.

• Unplug the power cord from the AC outlet when cleaning the

instrument.

• This instrument contains no user-serviceable parts. Do not open the

instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Radio waves may affect electro-medical devices.

- Do not use this product near medical devices or inside areas in

which the use of radio waves is restricted.

- Do not use this product within 15cm (6 in.) of persons with a heart

pacemaker implant.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, or place on it any containers (such as vases, bottles

or glasses) containing liquids which might spill into any openings.

If any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet.

Then have the instrument inspected by qualified Yamaha service

personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. Then

have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

For the AC adaptor

For the instrument

Power supply/AC adaptor

Do not open

Location

Water warning

Fire warning

If you notice any abnormality

DMI-5 1/2

8

SH2 Owner’s Manual

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality, or

possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when the instrument is not

to be used for extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected cables, to

prevent damage to the cables or injury to anyone who might trip

over them.

• When moving the instrument, be careful to avoid catching your

hands or feet on the instrument.

• Move the instrument slowly with extra care to keep the instrument

from falling over, or bumping against the surroundings. We

recommend that you consult a qualified carrier to transport or move

the instrument.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug from

the outlet. Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When you are not

using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Before connecting the instrument to other electronic components,

turn off the power for all components. Before turning the power on

or off for all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing the

instrument to set the desired listening level.

• Do not insert a finger or hand in any gaps on the fallboard or

instrument. Also take care that the fallboard does not pinch your

finger.

• Never insert or drop paper, metallic, or other objects into the gaps or

opening on the main unit, fallboard, or keyboard. This could cause

physical injury to you or others, damage to the instrument or other

property, or operational failure.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons, switches

or connectors.

• Do not use the instrument/device or headphones for a long period of

time at a high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

• Close the fallboard when the instrument is not in use. Hold the

fallboard with both hands when opening or closing it. Be careful to

avoid catching fingers (yours or others) between the fallboard and

the main unit.

• Do not go near the instrument during an earthquake. Strong shaking

during an earthquake could cause the instrument to move or tip

over, resulting in damage to the instrument or its parts, and possibly

causing injury.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Power supply/AC adaptor

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

9

SH2 Owner’s Manual

English

NOTICE

To avoid the possibility of malfunction/ damage to

the product, damage to data, or damage to other

property, follow the notices below.

 Handling

• Do not connect this product to public Wi-Fi and/or

Internet directly. Only connect this product to the

Internet through a router with strong password-

protections. Consult your router manufacturer for

information on security best practices.

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric

devices. Otherwise, the instrument, TV, or radio may

generate noise. When you use the instrument along with

a smart device, such as an iPhone, iPad, etc., we

recommend that you set that device’s “Airplane Mode” to

on and then the Wi-Fi/Bluetooth setting to on in order

to avoid noise caused by communication.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in direct

sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disfiguration, damage to

the internal components or unstable operation.

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or

keyboard.

• Bumping the surface of the instrument with metal,

porcelain, or other hard objects can cause the finish to

crack or peel. Use caution.

• Do not drag the instrument when moving it. Doing so

may damage the floor.

 Maintenance

• When cleaning the instrument, use a soft and dry cloth.

Do not use paint thinners, solvents, alcohol, cleaning

fluids, or chemical-impregnated wiping cloths.

• Gently remove dust and dirt with a soft cloth. Do not

wipe too hard since small particles of dirt can scratch the

instrument’s finish.

• During extreme changes in temperature or humidity,

condensation may occur and water may collect on the

surface of the instrument. If water is left, the wooden

parts may absorb the water and be damaged. Make sure

to wipe any water off immediately with a soft cloth.

 Saving data

• The MIDI Song recorded to this instrument (page 20)

are retained when the power is turned off. However, the

saved data may be lost due to some failure, an operation

mistake, etc. Save your important data onto an external

device such as a computer (page 50).

• To protect against data loss through USB flash drive

damage, we recommend that you save your important

data onto spare USB flash drive or an external device

such as a computer as backup data.

Information

 About copyrights

• Copying of the commercially available musical data

including but not limited to MIDI data and/or audio

data is strictly prohibited except for your personal use.

• This product incorporates and bundles contents in

which Yamaha owns copyrights or with respect to which

Yamaha has license to use others' copyrights. Due to

copyright laws and other relevant laws, you are NOT

allowed to distribute media in which these contents are

saved or recorded and remain virtually the same or very

similar to those in the product.

* The contents described above include a computer

program, Accompaniment Style data, MIDI data,

WAVE data, voice recording data, a score, score data,

etc.

* You are allowed to distribute medium in which your

performance or music production using these contents

is recorded, and the permission of Yamaha

Corporation is not required in such cases.

 About functions/data bundled with

the instrument

• Some of the preset songs have been edited for length or

arrangement, and may not be exactly the same as the

original.

 About this manual

• The illustrations as shown in this manual are for

instructional purposes only, and may appear somewhat

different from those on your instrument.

• Windows is a registered trademark of Microsoft®

Corporation in the United States and other countries.

• iPhone, iPad and iPod touch are trademarks of Apple

Inc., registered in the U.S. and other countries.

• The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Yamaha Corporation is under license.

• The company names and product names in this manual

are the trademarks or registered trademarks of their

respective companies.

 About Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices

is a radio band shared by many types of equipment.

While Bluetooth compatible devices use a technology

minimizing the influence of other components using the

same radio band, such influence may reduce the speed

or distance of communications and in some cases

interrupt communications.

• The speed of signal transfer and the distance at which

communication is possible differs according to the

distance between the communicating devices, the

presence of obstacles, radio wave conditions and the

type of equipment.

• Yamaha does not guarantee all wireless connections

between this unit and devices compatible with Bluetooth

function.

10

SH2 Owner’s Manual

Thank you for choosing the Yamaha Silent Piano™. This instrument is equipped with the same keyboard

mechanisms as an acoustic piano. However, you can play with the sound muted, and use various functions not

available on an acoustic piano, such as changing Voices or recording your performance. This manual mainly

explains these functions as a Silent Piano. In order to make the most of the performance potential and features

of the instrument, please read the manuals thoroughly, and keep them in a handy place for later reference.

About the Manuals

This instrument has the following documents and instructional materials.

 Included Documents

Owner’s Manual (this book)

This manual mainly describes how to use

the particular functions for the Silent

Piano™ which can be used when the power

is turned on. For information on handling

as an acoustic piano, refer to the separate

manual for the piano.

 Online Materials (downloadable

from the website)

iPhone/iPad Connection Manual

(only in English, French, German

and Spanish)

Explains how to connect the instrument to

smart devices, such as an iPhone, iPad, etc.

Computer-related Operations

Includes instructions on connecting this

instrument to a computer, and operations

related to transferring data.

MIDI Reference

Contains MIDI related information.

To obtain these manuals, access the Yamaha Downloads, enter the model name for searching the desired files.

Included Accessories

• Owner’s Manual (this book) x 1

•AC adaptor* x 1

•Power cord* x 1

•Headphones x 1

•Headphone hanger x 1

• Attachment screws for headphone hanger x 2

•

“50 Classical Music Masterpieces” music book

x 1

*May not be included depending on your area. Check with your Yamaha dealer.

Yamaha Downloads

http://download.yamaha.com/

11

SH2 Owner’s Manual

English

Features

• Silencing System enables you play in any situation, at any time you want

Yamaha’s innovative silencing system brings you superior performance, yet with virtually complete silence.

Enjoy your performance just as if you were playing an acoustic piano—but without the need to worry about

bothering people around you.

• Non-contact sensors for maximum expressiveness

The non-contact optical sensors faithfully detect subtle movement of the keys without affecting the touch of

the keys. They catch keystroke information precisely, enabling you to perform with rich nuance and

extraordinarily subtle expression.

• Elegant, integrated design

The control unit has been given a graceful design that unobtrusively blends with the piano itself. Moreover, the

simple controllers allow you to operate the instrument easily.

• Realistic ambience of the Voices enhances your performance

This instrument puts the sound of 20 luxurious, authentic Voices at your fingertips. These include Yamaha’s

flagship CFX piano—which delivers dynamic sound, from a brilliant high-range to powerful bass—and the

Bösendorfer* Imperial, a world-class piano renowned for its subtle and warm sound. The instrument also

features advanced technologies such as Binaural Sampling. Listening with headphones to a piano Voice

enhanced through these methods gives the impression of being thoroughly immersed in the sound, as if it was

actually emanating from the piano.

Altogether, it delivers real sound faithful to that of an actual acoustic piano, such as the quick attack and the

graceful resonance of a sustained piano tone, as well as how the sound responds to your playing strength, and

the resonance effect when the damper pedal is pressed.

* Bösendorfer is a subsidiary company of Yamaha.

• Playback and recording functions for aid in learning and practice

You can record your performance to this instrument and a USB flash drive, and improve your performance by

listening back to the recording. This instrument also features a Bluetooth audio function, which allows you to

play along on this instrument with audio from a Bluetooth-equipped device, and even record the audio as an

audio Song.

Smart Device App “Smart Pianist”

The smart device app “Smart Pianist” (available as a free download) enables you to use the functions such

as selecting Voices, controlling the metronome intuitively with the visualized interface, or display the score

on your smart device.

For information about this app, access the following web page:

https://www.yamaha.com/kbdapps/

The connection wizard of the Smart Pianist helps you to connect this unit to your smart device properly. To

start connection wizard, tap [ ] (Menu) located upper left on the Smart Pianist screen to open the menu,

then tap “Instrument” followed by “Start Connection Wizard.”

12

Chapter

SH2 Owner’s Manual

1 Getting Started

Part names and functions

 Piano

DC IN jack

For connecting the supplied AC adaptor

(page 15).

Silencing lever

Activates the Silent Piano™ function.

 Pedals

Soft pedal

Reduces the volume and slightly changes the

timbre of the notes. The notes played before

this pedal is pressed are not affected.

Silencing pedal (for models not equipped

with a sostenuto pedal)

Activates the Silent Piano™ function by pressing

and sliding to the left.

Sostenuto pedal (for models equipped with a

sostenuto pedal)

Sustains the notes that are being played at that

time even after you release the keys.

Subsequently played notes are not affected.

Damper pedal

Sustains notes even after you release the keys.

When the Silent Piano™ function is enabled and

a piano Voice is selected, pressing this pedal

reproduces the complicated interaction of both

strings and soundboard resonance by the VRM

technology (page 40), and makes the sound

more like a real acoustic piano.

The damper pedal features an expressive half-

pedal function, and allows you to set the degree

to which pressing the damper pedal applies the

half-pedal effect (page 39) when using the

Silent Piano™ function.

1

2

Control unit

(page 13)

(on the rear of

the piano)

Control unit

(page 13)

Upright Piano Grand Piano

(for models

equipped with a

sostenuto pedal)

1

2

1 2 3

Upright Piano Grand Piano

1

2

3

13

English

SH2 Owner’s Manual

 Control unit

[PHONES] jacks

For connecting a pair of headphones with

stereo mini plug (page 16). Up to two

headphones can be connected.

USB [TO DEVICE] terminal

For connecting a USB flash drive or an optional

USB wireless LAN adaptor (page 45).

[Aco.] lamp (only for grand pianos)

When the lamp is lit, the sound is produced by

using the acoustic piano mechanics (page 17).

[] (Standby/On) switch

For turning the power on or setting to standby

(page 15).

Mode button

Each time you press this button, the mode

changes in the following order, and the lamp of

the selected mode lights up in orange.

• VOICE mode

For controlling the Voice (page 18).

•SONG mode

For recording your performance or playing

back preset Songs, recorded Songs, etc.

(page 20).

•UTILITY mode

For setting various convenient functions, such

as the metronome (page 30).

Button 1, Button 2, Button 3

Depending on the selected mode, different

functions are assigned and can be controlled by

pressing each button.

(Bluetooth) lamp

Lights up when the Bluetooth function is on

(page52). It lights up in blue when the

instrument is connected with a Bluetooth-

equipped device, and it lights up in white when

no Bluetooth-equipped device is connected

and while in the UTILITY mode.

Display

Indicates various setting values, such as Voice

number, Song number and other parameter

values.

15

1716

18

13 14

1 2 3

4

5 6

8

9

7

11

10

12

Front panel

Bottom panel

These buttons (and switch) are

pressed upward from the bottom.

(only for grand pianos)

1

2

3

4

5

6

7

8

9

10

14

SH2 Owner’s Manual

[VOICE/VALUE] control

Rotating this allows you to select desired Voices

or adjust the setting values. Depending on

particular functions, you may need to press this

to control the function.

[VOLUME] control

For adjusting the volume of the entire sound

output via the [PHONES] jack, AUX OUT

jacks, USB [TO HOST] terminal or Bluetooth.

(Only grand pianos) Pressing the control can

activate or deactivate the Silent Piano™

function (page 17).

AUX OUT [R]/[L/L+R] jacks

For connecting an external audio device and

output the sound of this unit to the device

(page 47).

MIDI [IN]/[OUT] terminals

For connecting an external MIDI device

(page 49).

[DC IN 16V] jack

(Upright piano) For connecting the power

cord. This is connected to the DC IN jack on

the rear of the piano when the instrument is

shipped.

(Grand piano) For connecting the supplied AC

adaptor (page 15).

[SENSOR] jack/ [MD/AMP] jack

(For qualified Yamaha personnel only.) These

connect to the sensor and to the internal unit.

The plugs are already connected when the

instrument is shipped.

[AUX IN] jack

For connecting an audio device such as a

portable music player and input the sound to

this unit (page 48).

USB [TO HOST] jack

For connecting to a computer or a smart device

(page 50).

11

12

13

14

15

16

17

18

Display

Indicates various values such as Song number

and Parameter value.

This display also indicates various messages

with the three characters. For details, refer to

page 56.

Song number Parameter value

15

English

SH2 Owner’s Manual

Turning the power on/off

CAUTION

Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you

are not using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug

from the wall AC outlet.

1

Connect the plugs of the AC adaptor in the order shown in the illustration.

Make sure to loop the power cord through the metal hook attached to the rear (for upright pianos) or

the bottom (for grand pianos) of the piano.

WARNING

Use the specified adaptor (page 66) only. Use of other adaptors may result in irreparable damage to both the

adaptor and the instrument.

CAUTION

When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble

or malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.

NOTE

When disconnecting the AC adaptor, first turn the power off, and then follow the order shown above in reverse.

2

Press the [] (Standby/On) switch to turn the

power on.

The [ ] (Standby/On) lamp lights up.

To turn the power off, press the switch again.

NOTE

The sound will not be properly output if a key was pressed when the power was turned on. Do not touch any keys

when turning the power on.

1-2

1-1

1-4

1-2

1-1

1-3

1-4

Upright piano

Grand piano

DC IN jack

Hook is located on

the rear of the piano.

AC

adaptor

Power cord

AC plug

AC outlet

[DC IN 16V] jack

AC outlet

AC plug

Power cord

AC

adaptor

Hooks are located on the

bottom of the piano,

behind the control unit.

The shape of the plug and outlet differ depending on your locale.

16

SH2 Owner’s Manual

Using headphones

Connect a pair of headphones to the [PHONES] jack. Since this

instrument is equipped with two [PHONES] jacks, you can connect

two pairs of headphones. If you are using only one pair, insert the

plug into either of these jacks.

Even when listening through headphones, you can enjoy

exceptionally realistic, natural sound by Yamaha’s advanced

technologies, Binaural Sampling and Stereophonic Optimizer. For

details, refer to page 19.

CAUTION

• Do not use the headphones for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing

loss.

• Be careful not to catch your foot on the headphone cord.

NOTICE

Do not pull the cord of the headphones or apply excessive force on the plug. This can damage the headphones and

result in sound degradation.

 Attaching the headphone hanger

Attach the headphone hanger to the bottom of the control unit with

the supplied two screws.

NOTICE

Do not hang anything other than the headphones on the hanger.

Otherwise, the instrument or the hanger may be damaged.

Auto Power Off function

To prevent unnecessary power consumption, this unit features an Auto Power Off function that

automatically turns the power off if the instrument is not operated for 30 minutes.

NOTICE

When the instrument is communicating with other devices or the Songs are played back, the power will not be

turned off automatically. Make sure to turn off the power by pressing the [] (Standby/On) switch when the

instrument is not in use.

Disabling Auto Power Off

Turn the power on while holding down the

lowest key (A-1). “PoF” appears on the display

and the unit starts up with the Auto Power Off

function disabled.

To turn the Auto Power Off function on or off

while the power is on, refer to page 43.

Lowest key (A-1)

Phone plug

(stereo mini)

Phillips-head (+) screwdriver

17

Chapter

English

SH2 Owner’s Manual

2 Playing with the Silent Piano™

Function

This instrument can be played both as a normal acoustic piano, and also as a Silent Piano™. Enabling the Silent

Piano™ function lets you take advantage of a variety of powerful functions—such as playing preset Voices built

into unit and recording your performances. Try out the Silent Piano™ function and explore the possibilities.

Using the Silent Piano™ function

1

Plug the headphones into the [PHONES] jack (page 16).

2

Rotate the [VOLUME] control to the far-left

position to set the volume to minimum.

3

Press the [] (Standby/On) switch to turn the power on.

4

Activate the Silent Piano™ function by one of the following operations.

These operations prevent the hammers from actually striking the strings.

(For upright pianos equipped with a sostenuto pedal)

• Pull the silencing lever towards you until you

hear a click and feel the mechanism catch.

(For upright pianos not equipped with a sostenuto pedal)

• Press the center pedal and slide it to the left.

(For grand pianos)

• Make sure that the [Aco.] lamp is

turned off.

If the lamp is lit, press the [VOLUME] control

to turn it off.

NOTE

For grand pianos, the Silent Piano™ function is activated (the [Aco.] lamp is off) automatically, when the power of the

unit is turned on. If you want to play an acoustic piano, turn the [Aco.] lamp on by pressing the [VOLUME] control.

Off

18

SH2 Owner’s Manual

Selecting Voices

When the Silent Piano™ function is enabled, you can select and play the various built-in preset Voices from the

keyboard. By default, the CFX Grand is always selected when the power is turned on. For the available Voices,

refer to the “Voice List” on page 19.

NOTE

• To hear and experience the characteristics of the Voices, listen to the Demo Songs for each Voice (page 20).

• You can change various settings such as sound effect, Touch Sensitivity, tuning, etc. in the Function Settings (page 34).

• Changing the Voice while pressing the keyboard may cause a sudden large change in the volume.

5

While playing the keyboard, adjust the volume level by rotating the [VOLUME]

control.

Rotating to the right increases the volume, while rotating to the left decreases it.

NOTE

The physical sound of the keyboard mechanism remains even when the Silent Piano™ function is active.

1

Press the Mode button several times

until the [VOICE] lamp lights up in

orange.

The currently selected Voice number is shown

on the display.

2

Use the [VOICE/VALUE] control or

one of Buttons 1 – 3 to select the

desired Voice.

The selected Voice can be confirmed by the

lamp and the display.

• [VOICE/VALUE] control

Rotating the control one by one switches the Voice to the next or previous one in the order of the Voice

List. Pressing this control instantly selects the CFX Grand (PF1) Voice.

• Button 1 [CFX]

Pressing this button selects the CFX Grand (PF1) Voice.

• Button 2 [Bösendorfer]

Pressing this button selects the Bösendorfer Imperial (PF2) Voice.

• Button 3 [Others]

Pressing this button selects the first Voice in each category (PF3, EP1, HS1, Or1, Pd1, Ly1) in order.

While the power is on, the Voice selected by Button 3 [Others] is retained. Pressing Button 3 [Others]

can calls up the last selected Voice instantly. When the power is turned off, the Voice for Button 3

resets to the Upright Piano (PF3) Voice.

Lights up in orange

Current Voice

number

The lamp of the selected button lights up in orange.

Press one of these buttons.

19

English

SH2 Owner’s Manual

Voi ce L ist

NOTE

For details on each Voice, refer to page 60.

 Reproducing a natural sound distance sensation (even when using

headphones)—Binaural Sampling and Stereophonic Optimizer

This instrument features two advanced technologies that allow you to enjoy exceptionally realistic, natural

sound, even though listening on headphones. These functions can be turned on or off as desired (page 40).

Binaural Sampling (CFX Grand Voice only)

Binaural Sampling is a method that uses two special microphones set at the ear position of a performer and

records the sound from a piano as it would actually be heard. Listening to the sound with this effect through

headphones gives the impression of being immersed in the sound, as if it was actually emanating from the

piano. When the CFX Grand Voice is selected, binaural sampled sound is produced.

Stereophonic Optimizer (Piano Voices other than CFX Grand)

Stereophonic Optimizer is an effect which reproduces the natural sound distance, like with the sound of

Binaural Sampling, even though you are listening to it on headphones. When one of the Piano Voices other

than CFX Grand (page 60) is selected, the Stereophonic Optimizer is enabled.

Button Display Voice Name Button Display Voice Name

1 Binaural CFX Grand 3 Celesta

CFX Grand

2 Bösendorfer Imperial Organ Principal

3 Upright Piano Organ Tutti

Pop Grand Jazz Organ

Ballad Grand Strings

Stage E.Piano Choir

DX E.Piano Synth Pad

Vintage E.Piano Piano + Strings

Harpsichord 8' Piano + Pad

Harpsichord 8'+4' Piano + DX E.Piano

20

Chapter

SH2 Owner’s Manual

3

Playing Back and Recording Songs

The preset songs, your recorded performances, and commercially available songs are referred to as “Songs” in

this manual. This instrument can play or record MIDI Songs and Audio Songs.

Available Song format

Playing back Songs

Songs that can be played (Song Category)

* The Song categories for USB flash drive are shown only when the USB flash drive is connected.

** The External Song categories are shown only when the data exist.

For information about the playback sequence of Song files in the USB flash drive, refer to page 64.

Songs Data formats Extension

MIDI

Songs

In a MIDI song, the information of your keyboard

performance (such as keystroke and velocity) is

recorded. This is not a recording of the actual sound.

Based on the performance information, the tone

generator outputs the sound.

A MIDI Song uses a small amount of data capacity in

comparison to an Audio song, and allows you to

easily change aspects of the sound, such as Voices

used, etc.

SMF format 0

Standard MIDI File format 0 for

playback and recording. MIDI songs

recorded with this unit are saved in

this format.

SMF format 1

Standard MIDI File format 1 for

playback only.

.MID

Audio

Songs

An Audio Song is a recording of the performed sound

itself.

This data is recorded in the same way as that used in

recording cassette tapes, or with voice recorders, etc.

This data can be played with a portable music player,

etc., allowing you to easily let other people hear your

performance.

WAV

Audio file format commonly used by

computers. This instrument can play

44.1kHz/16bit stereo WAV files. Audio

Songs recorded on this instrument

are saved in this format.

.WAV

Song Category Song Number Description

Voice Demo Song (MIDI) d.01 – d.20

Demo Songs which effectively demonstrates each

Voice (page 62) on this unit.

Preset Song (MIDI) P.01 – P.50

50 classical piano preset Songs (page 62) stored to

this unit. These Songs correspond to the score in the

music book “50 Classical Music Masterpieces,”

included with this unit.

USB flash

drive*

User Song

(Audio)

A.00 – A.99

Audio Songs which have been recorded with this unit

and saved to a USB flash drive (page 24).

External Song

(Audio)**

C.00 – C.99,

100 – 399

External Audio Songs, commercially available or which

have been recorded on a computer, etc. and saved to a

USB flash drive.

User Song

(MIDI)

S.00 – S.99

MIDI Songs which have been recorded with this unit

and saved to a USB flash drive (page 24).

External Song

(MIDI)**

F.00 – F.99,

100 – 399

External MIDI Songs, commercially available or which

have been recorded on a computer, etc. and saved to a

USB flash drive.

Internal

memory

User Song

(MIDI)

U.01 – U.10

MIDI Songs which have been recorded to internal

memory of this unit (page 24).

External Song

(MIDI)**

L.01 – L.99

External MIDI Songs (commercially available or which

have been recorded on a computer, etc.) transferred

from a computer to this unit.

Страница загружается ...

Yamaha SH2 Инструкция по применению

Yamaha SH2 Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов