Beko WMY 81283 PTLMB2 Руководство пользователя

Бренд: Beko

Модель: WMY 81283 PTLMB2

Категория: Стиральные машины

Тип: Руководство пользователя

2820524312_EN / 26-09-14.(8:57)

WMY 81283 PTLMB2

Document Number

Washing Machine

User’s Manual

Стиральная машина

Инструкция по эксплуатации

This product was manufactured using the latest technology in environmentally friendly conditions.

Washing Machine / User’s Manual

3 / EN

General safety nstructons

This section includes security instructions which may help prevent

the injuries and material damage risks. All kinds of warranties shall

be invalid if these instructions are not observed.

1.1 Lfe and property safety

Never place the product on a carpet-covered floor. Electrcal parts

wll get overheated snce ar cannot crculate from under the devce.

Ths wll cause problems wth your product.

Unplug the product f t s not n use.

Always have the nstallaton and reparng procedures carred out

by the Authorzed Servce Agent. Manufacturer shall not be held

lable for damages that may arse from procedures carred out by

unauthorzed persons.

The water supply and dranng hoses must be securely fastened and

reman undamaged. Otherwse, water leak may occur.

Whle there s stll water nsde the product, never open the loadng

door or remove the flter. Otherwse, rsk of floodng and njury from

hot water wll occur.

Do not force open the locked loadng door. Door can be opened a few

mnutes after the washng cycle ends. In case of forcng the loadng

door to open, the door and the lock mechansm may get damaged.

Use detergents, softeners and supplements sutable for automatc

washng machnes only.

Follow the nstructons on the label of textles and the detergent

package.

1.2 Chldren's safety

Ths product can be used by the chldren who are at the age of 8 and

over and the people whose physcal, sensory or mental sklls are not

fully developed or who do not have necessary requred experence

and knowledge as long as they are supervsed or traned about the

safe use of the product and ts rsks. Chldren should not play wth the

devce. Cleanng and mantenance works should not be performed

by chldren unless they are supervsed by someone. Chldren of less

than 3 years should be kept away unless contnuously supervsed.

Packagng materals may be dangerous for the chldren. Keep

packagng materals n a safe place away from reach of the chldren.

Electrcal products are dangerous for the chldren. Keep the chldren

away from the product when t s n use. Do not allow them to play

4 / EN

Washing Machine / User’s Manual

wth the product. Use chld lock to prevent chldren from ntervenng

wth the product.

Do not forget to close the loadng door when leavng the room where

the product s located.

store all detergents and addtves n a safe place away from the

reach of the chldren by closng the cover of the detergent contaner

or sealng the detergent package.

1.3 Electrcal safety

If the product has a falure, t should not be operated unless t s

repared by the Authorzed Servce Agent. Rsk of electrc shock!

Ths product s desgned to resume operatng n the event of

powerng on after a power nterrupton. If you wsh to cancel the

programme, see "Cancellng the programme" secton.

Plug the product nto a grounded outlet protected by a 16 A fuse. Do

not neglect to have the groundng nstallaton made by a qualfed

electrcan. Our company shall not be lable for any damages that

wll arse when the product s used wthout groundng n accordance

wth the local regulatons.

Do not wash the product by sprayng or pourng water onto t! Rsk of

electrc shock!

Never touch the power cable plug wth wet hands! Do not grab the

power cord to unplug the machne, always unplug t by holdng the

socket wth one hand, and pullng the plug wth the other hand.

Product should be unplugged durng nstallaton, mantenance,

cleanng and repar procedures.

If the power cable s damaged, t must be replaced by the

manufacturer, after sales servce or a smlarly qualfed person

(preferably an electrcan) or someone desgnated by the mporter n

order to avod possble rsks.

1.4 Hot surface safety

While washing the laundry at high

temperatures, the loading door glass

will get hot. Considering this fact, during

washing operation keep the children away

from the loading door of the product to

prevent them touching it.

Washing Machine / User’s Manual

5 / EN

Important instructions for environment

2.1 Compliance with WEEE Directive

This product complies with EU WEEE Directive (2012/19/EU). This product bears a

classification symbol for waste electrical and electronic equipment (WEEE).

This product has been manufactured with high quality parts and materials which

can be reused and are suitable for recycling. Do not dispose of the waste product

with normal domestic and other wastes at the end of its service life. Take it to the

collection center for the recycling of electrical and electronic equipment. Please

consult your local authorities to learn about these collection centers.

Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not

contain harmful and prohibited materials specified in the Directive.

2.2 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance

with our National Environment Regulations. Do not dispose of the packaging materials together

with the domestic or other wastes. Take them to the packaging material collection points

designated by the local authorities.

Intended use

• This product has been designed for domestic use. It is not for commercial

purposes or it should not be used out of its intended use.

• The product must only be used for washing and rinsing of laundry that are

marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or

transportation.

• The service life of your product is 10 years. During this period, original spare

parts will be available to operate the appliance properly.

6 / EN

Washing Machine / User’s Manual

Technical specifications

Supplier name or trademark Beko

Model name WMY 81283 PTLMB2

Rated capacity (kg) 8

Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A

Maximum spin speed (rpm) 1200

Height (cm) 84

Width (cm) 60

Depth (cm) 54

Net weight (±4 kg.) 70

Single Water inlet / Double Water inlet

• / -

• Available

Electrical input (V/Hz) 230 V / 50Hz

Total current (A) 10

Total power (W) 2200

Main model code 1011

Washing Machine / User’s Manual

7 / EN

4.1 Installation

• Apply to the nearest authorized service agent for the installation of your product.

• Preparation of the location and electrical, tap water and waste water installations at the place of

installation is under customer's responsibility.

• Make sure that the water inlet and discharge hoses as well as the power cable are not folded,

pinched or crushed while pushing the product into its place after installation or cleaning

procedures.

• Make sure that the installation and electrical connections of the product are performed by

authorized service. Manufacturer shall not be held liable for damages that may arise from

procedures carried out by unauthorized persons.

• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed.

Damaged products cause risks for your safety.

4.1.1 Approprate nstallaton locaton

• Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other

similar surfaces.

• When the washing machine and drier are placed on top of each other, their total weight –when

loaded– amounts to 180 kilograms. Place the product on a solid and flat floor that has sufficient

load carrying capacity!

• Do not place the product on the power cable.

• Do not install the product in the environments where the temperature falls below 0 ºC.

• Leave a minimum space of 1 cm between the machine and the furniture.

• On a graduated floor, do not place the product next to the edge or on a platform.

4.1.2 Removng packagng renforcement

Tilt the machine backwards to remove the packaging

reinforcement. Remove the packaging reinforcement by pulling the

ribbon. Do not make this operation alone by yourself.

4.1.3 Removng the transportaton locks

1 Loose all bolts with an appropriate wrench until they turn freely (C).

2 Remove the transport safety bolts by turning them slightly.

3 Insert the plastic covers in the bag containing the user manual to the openings on the rear

panel. (P)

CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the

product will be damaged.

Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again

in the future.

Install the transport safety bolts in reverse order of the disassembly procedure.

Never move the product without the transportation safety bolts properly fixed in place!

8 / EN

Washing Machine / User’s Manual

4.1.4 Connectng water supply

The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have

10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a

pressure reducing valve if water pressure is higher.

If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the

supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a

blind stopper group.)

CAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a case the

laundry will get damaged or the product will switch to protection mode and will not operate.

CAUTION: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

Connect the special water supply hoses supplied with the product to the water

inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose

(right) (max. 25 ºC) is for cold water inlet.

Make sure that the hot and cold water taps are connected correctly when the

product is being installed. Otherwise, your laundry will come out hot at the end of

the washing process and wear out.

1 Tighten the nuts of the hose by hand. Never use a tool when

tightening the nuts.

2 When hose connection is completed, check whether there is

leak problems at the connection points by opening the taps

fully. If any leaks occur, turn off the tap and remove the nut.

Retighten the nut carefully after checking the seal. In order to

prevent the water leaks and resultant damages, keep the taps

closed when you do not use the product.

4.1.5 Connectng the dran hose to the dran

• Attach the end of the drain hose directly to waste water drain, lavatory or bathtub.

CAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge.

Moreover, there is risk of scalding due to high washing temperatures! In order to prevent such situations and

make sure that the machine performs water intake and discharge processes without any problem, fix the drain

hose securely.

100cm

40cm

• Connect the drain hose to a minimum height of 40

cm and a maximum height of 100 cm.

• In case the drain hose is elevated after laying it on

the floor level or close to the ground (less than 40 cm

above the ground), water discharge becomes more

difficult and the laundry may come out excessively

wet. Therefore, follow the heights described in the

figure.

• To prevent the waste water to go back into the machine again and to ensure easy drainage, do not

immerse the end of the hose into the waste water or do not insert it into the drain for more than

15 cm. If it is too long, cut it short.

• The end of the hose should not be bent, it should not be stepped on and the hose must not be

pinched between the drain and the machine.

• If the length of the hose is too short, use it by adding an original extension hose. Length of the

hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the

extension hose and the drain hose of the product must be fitted well with an appropriate clamp as

not to come off and leak.

Washing Machine / User’s Manual

9 / EN

4.1.6 Adjustng the feet

CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level

and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its

place and cause crushing and vibration problems.

CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

1 Loosen the lock nuts on the feet by hand.

2 Adjust the feet until the product stands in a stable and balanced way.

3. Tighten all lock nuts by hand again.

4.1.7 Electrcal connecton

Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable

for any damages that will arise when the product is used without grounding in accordance with the

local regulations.

• Connection must comply with national regulations.

• Power cable plug must be within easy reach after installation.

• If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified

electrician install a 16 Amp fuse.

• The voltage specified in the "Technical specifications" section must be equal to your mains

voltage.

• Do not make connections via extension cables or multi-plugs.

CAUTION: Damaged power cables must be replaced by the Authorized Service Agents.

4.1.8 Intal use

Before starting to use the product make sure that the preparations

are made which are in line with the “Important Safety and

Environment Instructions” and the instructions in the “Installation”

section.

To prepare the product for washing laundry, perform first operation

in Drum Cleaning programme. If this program is not available in your

machine, apply the method which is described in the section 4.4.2.

Use an anti-limescale suitable for the washing machines.

Some water might have remained in the product due to the quality control processes in the production. It is not

harmful for the product.

10 / EN

Washing Machine / User’s Manual

4.2 Preparation

4.2.1 Sortng the laundry

* Sort laundry according to type of fabric, color, and degree of soiling and allowable water

temperature.

* Always obey the instructions given on the garment tags.

4.2.2 Preparng laundry for washng

• Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons

will damage the machine. Remove the metal pieces or wash the clothes by putting them in a

laundry bag or pillow case.

• Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside

out and brush. Such objects may damage the product or cause noise problem.

• Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.

• Place curtains in without compressing them. Remove curtain attachment items.

• Fasten zippers, sew loose buttons and mend rips and tears.

• Wash “machine washable” or “hand washable” labeled products only with an appropriate

programme.

• Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash

them separately.

• Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.

• Only use the dyes / color changers and descaling agents which are appropriate to machine wash.

Always follow the instructions on the package.

• Wash trousers and delicate laundry turned inside out.

• Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will

reduce pilling.

• Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must

be shaken off before placing into the machine. Such dusts and powders on the laundry may build

up on the inner parts of the machine in time and can cause damage.

4.2.3 Thngs to be done for energy savng

Following information will help you use the product in an ecological and energy-efficient manner.

• Operate the product in the highest capacity allowed by the programme you have selected, but do

not overload; see, "Programme and consumption table". See, “Programme and consumption table"

• Always follow the instructions on the detergent packaging.

• Wash slightly soiled laundry at low temperatures.

• Use faster programmes for small quantities of lightly soiled laundry.

• Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.

• If you plan to dry your laundry in a dryer, select the highest spin speed recommended during

washing process.

• Do not use more detergent than the recommended amount specified on its package.

4.2.4 Loadng the laundry

1. Open the laundry cover.

2. Put the laundry items into the machine in a loose manner.

3. Push and close the loading cover until you hear the locking sound. Ensure that no items are caught

in the door. The loading door is locked while a programme is running. The door can only be opened

a while after the programme comes to an end.

4.2.5 Correct load capacty

The maximum load capacity depends on the type of laundry, the degree of soiling and the washing

programme desired.

Machine automatically adjusts the water amount according to the weight of the laundry put inside it.

WARNING: Follow the information in the “Programme and consumption table”. When overloaded, machine's

washing performance will drop. Moreover, noise and vibration problems may occur.

Washing Machine / User’s Manual

11 / EN

4.2.6 Usng detergent and softener

When using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the

manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if

available.

The detergent drawer is composed of three compartments:

– (1) for prewash

– (2) for main wash

– (3) for softener

– (

) in addition, there is a siphon piece in the softener

compartment.

Detergent, softener and other cleaning agents

• Add detergent and softener before starting the washing programme.

• While the washing cycle is in progress, do not leave the detergent dispenser open!

• When using a programme without prewash, do not put any detergent into the prewash

compartment (compartment nr. "1").

• In a programme with prewash, do not put liquid detergent into the prewash compartment

(compartment nr. "1").

• Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place

the detergent bag or the dispensing ball directly among the laundry in the machine.

If you are using liquid detergent, do not forget to place the liquid detergent container into the main

wash compartment (compartment number “2”).

Choosing the detergent type

Detergent type to be used depends on the fabric type and color.

• Use different detergents for coloured and white laundry.

• Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.)

used solely for delicate clothes.

• When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.

• Wash woolens with special detergent made specifically for woolens.

CAUTION: Use only detergents manufactured specifically for washing machines.

CAUTION: Do not use soap powder.

Adjusting detergent amount

The amount of washing detergent to be used depends on the amount of laundry, the degree of

soiling and water hardness.

• Do not use amounts exceeding the dosage quantities recommended on the detergent package

to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental

protection.

• Use lesser detergent for small amounts or lightly soiled clothes.

Using softeners

Pour the softener into the softener compartment of the detergent drawer.

• Do not exceed the (>max<) level sign on the softener compartment.

• If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.

12 / EN

Washing Machine / User’s Manual

Using liquid detergents

If the product contains a liquid detergent cup:

• Put the liquid detergent container into the

compartment no “2”.

• If the liquid detergent lost its fluidity, dilute

it with water before putting it into the

detergent container.

If the product does not contain a liquid detergent cup:

• Do not use liquid detergent for the prewash in a programme with prewash.

• Liquid detergent stains your clothes when used with Delayed Start function. If you are going to

use the Delayed Start function, do not use liquid detergent.

Using gel and tablet detergent

• If the gel detergent thickness is fluidal and your machine does not contain a special liquid

detergent cup, put the gel detergent into the main wash detergent compartment during first

water intake. If your machine contains a liquid detergent cup, fill the detergent into this cup before

starting the programme.

• If the gel detergent thickness is not fluidal or in the shape of capsule liquid tablet, put it directly

into the drum before washing.

• Put tablet detergents into the main wash compartment (compartment nr. "2") or directly into the

drum before washing.

Using starch

• Put the liquid soda, powder soda or the fabric dye into the softener compartment.

Do not use softener and starch together in a washing cycle.

Wipe the inside of the machine with a damp and clean cloth after using starch.

Using limescale remover

• When required, use limescale removers manufactured specifically for washing machines only.

Using bleaches

Add the bleach at the beginning of the washing cycle by selecting a prewash program. Do not put

detergent in the prewash compartment. As an alternative application, select a programme with

extra rinse and add the bleaching agent while the machine is taking water from the detergent

compartment during first rinsing step.

• Do not use bleaching agent and detergent by mixing them.

• Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it

causes skin irritation. Do not pour the bleach onto the laundry and do not use it with the colored

items.

• When using oxygen-based decolorant, select a program which washes the laundry at a low

temperature.

• Oxygen-based decolorant can be used with the detergent; however, if it is not at the same

consistence, first put detergent in the compartment number “2” in the detergent dispenser and

wait for the machine to flush the detergent when taking in water. While the machine continues

taking in water, add decolorant in the same compartment.

Washing Machine / User’s Manual

13 / EN

4.2.7 Tps for effcent washng

Clothes

Light Colours and

Whites

Colours

Black/Dark

Colours

Delicates/

Woolens/

Silks

(Recommended temperature

range based on soiling level:

40-90

(Recommended temperature

range based on soiling level:

cold -40

(Recommended

temperature range

based on soiling level:

cold -40

(Recommended

temperature range

based on soiling

level: cold -30

Soiling Level

Heavily

Soiled

(difficult stains

such as grass,

coffee, fruits

and blood.)

It may be necessary to pre-

treat the stains or perform

prewash. Powder and liquid

detergents recommended

for whites can be used at

dosages recommended for

heavily soiled clothes. It is

recommended to use powder

detergents to clean clay and

soil stains and the stains that

are sensitive to bleaches.

Powder and liquid detergents

recommended for colors can be

used at dosages recommended

for heavily soiled clothes. It is

recommended to use powder

detergents to clean clay and

soil stains and the stains that

are sensitive to bleaches. Use

detergents without bleach.

Liquid detergents

suitable for colors

and dark colors can

be used at dosages

recommended for

heavily soiled clothes.

Prefer liquid

detergents

produced for

delicate clothes.

Woolen and silk

clothes must

be washed with

special woolen

detergents.

Normally

Soiled

(For example,

stains caused

by body on

collars and

cuffs)

Powder and liquid detergents

recommended for whites

can be used at dosages

recommended for normally

soiled clothes.

Powder and liquid detergents

recommended for colors can be

used at dosages recommended

for normally soiled clothes.

Detergents which do not

contain bleach should be used.

Liquid detergents

suitable for colors

and dark colors can

be used at dosages

recommended for

normally soiled

clothes.

Prefer liquid

detergents

produced for

delicate clothes.

Woolen and silk

clothes must

be washed with

special woolen

detergents.

Lightly

Soiled

(No visible

stains exist.)

Powder and liquid detergents

recommended for whites

can be used at dosages

recommended for lightly soiled

clothes.

Powder and liquid detergents

recommended for colors can be

used at dosages recommended

for lightly soiled clothes.

Detergents which do not

contain bleach should be used.

Liquid detergents

suitable for colors

and dark colors can

be used at dosages

recommended for

lightly soiled clothes.

Prefer liquid

detergents

produced for

delicate clothes.

Woolen and silk

clothes must

be washed with

special woolen

detergents.

14 / EN

Washing Machine / User’s Manual

4.3 Operating the product

4.3.1 Control panel

1 - Programme selection knob

2 - Temperature selection LEDs

3 - Spin speed selection LEDs

4 - Duration information display

5 - Child lock enabled LED

6 - End Time Setting button

7 - Door lock enabled LED

8 - Programme follow-up indicator LEDs

9 - On / Off button

10 - Start / Pause button

11 - Auxiliary function buttons

12 - Spin speed adjustment button

13 - Temperature adjustment button

14 - Programme Selection LEDs

1 2 3 4 5 6 7 8

1011121314

4.3.2 Programme selecton

1 Determine the programme suitable for the type, quantity and soiling level of the laundry in

accordance with the "Programme and consumption table".

1 Select the desired programme with the “Programme Selection” knob.

Programmes are limited with the highest spin speed appropriate for that particular type of fabric.

When selecting the program you will use, always take fabric type, color, soil degree and permitted water

temperature into consideration.

Always prefer the lowest temperature value which is fit to your laundry type. Higher temperature means higher

power consumption.

Washing Machine / User’s Manual

15 / EN

4.3.3 Programmes

• Cottons

Use for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes,

underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing

cycle.

• Synthetcs

Use to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a

gentle action and has a shorter washing cycle compared to the Cottons programme.

For curtains and tulle, use the Synthetic 40˚C programme with prewash and anti-creasing functions

selected. As their meshed texture causes excessive foaming, wash the veils/tulle by putting little

amount of detergent into the main wash compartment. Do not put detergent in the prewash

compartment.

• Woollens

Use to wash your woolen clothes. Select the appropriate temperature complying with the tags of

your clothes. Use appropriate detergents for woolens.

“The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of machine

washable wool products provided that the products are washed according to the instructions on the garment label

and those issued by the manufacturer of this washing machine. M1444.”

“In UK, Eire, Hong Kong and India the Woolmark trade mark is a Certification trade mark.”

• Cotton Economc

Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than

all other programmes, it provides high energy and water savings. Actual water temperature may

be different from the stated wash temperature. When you load the machine with less laundry (e.g.

½ capacity or less), programme time may automatically get shorter. In this case, energy and water

consumption will decrease more, providing a more economic wash. This programme is available in the

models with the remaining time indicator.

• BabyProtect

Use this programme for your laundry for which you require an anti-allergic and hygienic washing at

high temperature with intensive and long washing cycle.

• Delcate 20°

Use it to wash your delicate laundry. It washes with a gentler action without any interim spins

compared to the Synthetics program. It should be used for laundry for which sensitive wash is

recommended.

• Hand wash

Use to wash your woolen/delicate clothes that bear “not machine-washable” tags and for which

hand wash is recommended. It washes laundry with a very gentle washing action to not to damage

clothes.

• Daly express

Use this programme to wash your lightly soiled cotton clothes in a short time.

• Super short express

Use to wash your lightly soiled and unstained cotton laundry in a short time.

• Darkcare

Use this programme to wash your dark colored laundry or colored laundry that you do not want

them get faded. Washing is performed with little mechanic action and at low temperatures. It is

recommended to use liquid detergent or woolen shampoo for dark coloured laundry.

• Mxed 40 (Mx 40)

Use this programme to wash your cotton and synthetic clothes together without sorting them.

• Freshen Up

To soften the soiling, it pre-treats the laundry by giving steam.

Load only half of the capacity stated for the selected programme.

When this programme is selected, it is normal to hear boiling noises since the steam generator boils water to

produce steam.

16 / EN

Washing Machine / User’s Manual

• 40 mn / 40° (40° / 40’)

Use this programme to wash your lightly soiled and unstained cotton laundry in a short time.

• Sports

Use this programme to wash your garments that are worn for a short time such as sportswear. It is

suitable to wash little amount of cotton / synthetic blended garments.

• Rnse

Use when you want to rinse or starch separately.

• Spn + Dran

Use to drain the water in the machine.

4.3.4 Temperature selecton

Whenever a new programme is selected, the recommended temperature for the selected

programme appears on the temperature indicator.

To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease

gradually.

If the programme has not reached the heating step, you can change the temperature without switching the

machine to Pause mode.

4.3.5 Spn speed selecton

Whenever a new programme is selected, the recommended spin speed of the selected programme is

displayed on the spin speed indicator.

To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases

gradually.

Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the

display. See "Auxiliary function selection" section for explanations of these options.

If the programme has not reached the spinning step, you can change the speed without switching the machine to

Pause mode.

Indcatve values for Synthetcs programmes (EN)

Load (kg)

Water

Consumpton (l)

Energy

Consumpton

(kWh)

Programme

Duraton (mn) *

Remanng Mosture Content

(%) **

Remanng Mosture Content

(%) **

≤ 1000 rpm > 1000 rpm

Synthetcs 60 3 64 1.10

01:57 45 40

Synthetcs 40 3 64 0.61

01:57 45 40

* You can see the washng tme of the programme you have selected on the dsplay of the machne. It s normal that small dfferences may

occur between the tme shown on the dsplay and the real washng tme.

** Remanng mosture content values may dffer accordng to the selected spn speed.

Washing Machine / User’s Manual

17 / EN

4.3.6 Programme and consumpton table

• : Selectable.

* : Automatically selected, no canceling.

** : Energy Label programme (EN 60456 Ed.3)

*** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin

speed.

**** : Program will detect the type and amount of the laundry which you put into the machine and adjust the water

consumption, energy consumption and program duration automatically.

- : See the programme description for maximum load.

** “Cotton eco 40°C and Cotton eco 60°C are standard programmes.” These programmes are known as ‘40°C cotton

standard programme’ and ‘60°C cotton standard programme’ and indicated with the

symbols on the

panel.

The auxiliary functions in the table may vary according to the model of your machine.

Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature,

ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in

electric voltage.

You can see the washing time of the programme you have selected on the display of the machine. It is normal that small

differences may occur between the time shown on the display and the real washing time.

“Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be

added or removed.”

“The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin

speed of your machine.”

"The manufacturer reserves the right to make modifications in the programmes and auxiliary functions given in the table.

While these modifications will not change the machine performance, programme steps and durations can be changed."

Auxiliary functions

Programme (°C)

Max. Load (kg)

Water Consumption (l)

Energy Consumption (kWh)

Max. Speed***

Prewash

Quick Wash

Rinse Plus

Rinse Hold

Pet hair removal

Selectable temperature

range °C

Cotton Economic 60** 8 51 1.06 1600 Cold-60

Cottons

90 8 77 2.20 1600 • • • • • Cold-90

60 8 77 1.62 1600 • • • • • Cold-90

40 8 77 0.87 1600 • • • • • Cold-90

Synthetics

60 3 64 1.10 1200 • • • • • Cold-60

40 3 64 0.61 1200 • • • • • Cold-60

Daily express

90 8 60 2.00 1400 • • Cold-90

60 8 60 1.10 1400 • • Cold-90

30 8 60 0.40 1400 • • Cold-90

Super short express 30 2 35 0.15 1400 • • Cold-30

Freshen Up - 2 35 0.15 1000 -

Woollens 40 1.5 49 0.25 1200 • • Cold-40

Hand wash 30 1 40 0.25 1200 Cold-30

Darkcare 40 4 80 0.55 800 • * • • Cold-40

40° / 40’ 40 8 32 0.40 1400 • Cold-40

Mixed 40 (Mix 40) 40 3.5 63 0.85 800 • • • • Cold-40

BabyProtect 90 8 90 2.40 1400 * 90-30

Hygiene 20° 20 4 98 0.42 1600 * 20

Delicate 20° 20 4 45 0.15 1200 • • 20

18 / EN

Washing Machine / User’s Manual

4.3.7 Auxlary functon selecton

Select the desired auxiliary functions before starting the programme.

Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator

light will illuminate.

Indicator lights of the auxiliary functions that are not allowed to be selected with the current programme will

flash and an audio warning is given.

Furthermore, you may also select or cancel auxiliary functions that are suitable to the running

programme after the washing cycle starts. If the wash cycle has reached a point where no auxiliary

function can be selected, an audio warning will be given and the related auxiliary function's light will

flash.

Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is

selected before starting the machine, the function selected first will be canceled and the second auxiliary

function selection will remain active. For example, if you want to select Quick Wash after you have selected the

Additional Water, Additional Water will be canceled and Quick Wash will remain active.

An auxiliary function that is not compatible with the programme cannot be selected. (See, “Programme and

consumption table")

Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be

cancelled. The frame of the auxiliary function will not be illuminated, only inner area will be illuminated.

• Prewash

A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy,

water, detergent and time.

• Quck Wash

This function can be used in Cottons and Synthetics programmes. It decreases the washing times

and also the number of rinsing steps for lightly soiled laundry.

When you select this function, load your machine with half of the maximum laundry specified in the programme

table.

• Rnse Plus

This function enables the machine to make another rinsing in addition to the one already made after

the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the

minimal detergent remnants on the laundry can be reduced.

Use to wash the cottons with lesser energy consumption and silently. Spin steps are cancelled for a

silent washing and the cycle ends with the Rinse Hold step. After completion of the programme, run

Spin cycle to spin the laundry.

• Pet har removal

This function helps to remove pet hair that remain on your garments more effectively.

When you select this function, Prewash and Extra Rinse steps are added to the normal programme.

Thus, washing is performed with more water (30%) and the pet hair is removed more effectively.

WARNING: Never wash your pets in the washing machine.

4.3.8 End Tme

With the End Time function, the startup of the programme may be delayed up to 24 hours. After

pressing End Time button, the programme's estimated ending time is displayed. If the End Time is

adjusted, End Time indicator is illuminated.

In order for the End Time function to be activated and the programme to be completed at the end of

the specified time, you must press Start / Pause button after adjusting the time.

If you want to cancel End Time function, press On / Off button to turn off and on the machine.

Do not use liquid detergents when you activate End Time function! There is the risk of staining of the

clothes.

1 Open the loading door, place the laundry and put detergent, etc.

2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.

3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.

Washing Machine / User’s Manual

19 / EN

4 Press Start / Pause button. Time countdown starts. “:” sign in the middle of the end time on the

display starts flashing.

Additional laundry may be loaded during the End Time countdown period. At the end of the countdown, End Time

indicator turns off, washing cycle starts and the time of the selected programme appears on the display.

When the End Time selection is completed, the time appears on the screen consists of end time plus the duration

of the selected programme.

4.3.9 Startng the programme

1. Press Start / Pause button to start the programme.

2. Programme follow-up light showing the startup of the programme will turn on.

If no programme is started or no key is pressed within 1-10 minute during programme selection process, the

machine will switch to OFF mode. Display and all indicators are turned off.

Selected programme data will be displayed if you press On / Off button.

4.3.10 Loadng door lock

There is a locking system on the loading door of the machine that prevents opening of the door in

cases when the water level is unsuitable.

"Door Locked" LED in the panel turns on when the loading door is locked.

4.3.11 Changng the selectons after the programme has started

After the programme has started you can make the following changes.

4.3.11.1 Swtchng the machne to pause mode:

Press the Start/Pause button to switch the machine to pause mode while a programme is running.

The light indicating the Start/Pause status and programme step starts flashing on the Programme

Follow-up indicator to show that the machine has been switched to the pause mode. Also, Loading

Door light will also flash until the door is ready to be opened. When the loading door is ready to

be opened loading door light will will turn off and programme step indicator and Start / Stop LED

continue to flash.

Also, when the loading door is ready to be opened, Loading Door light will also turn off in addition to

the programme step light.

4.3.11.2 Changng the auxlary functon, speed and temperature

Depending on the step the programme has reached, you can cancel or select the auxiliary functions.

See, "Auxiliary function selection".

You can also change the speed and temperature settings. See, "Spin speed selection" and

"Temperature selection".

If no change is allowed, the relevant light will flash for 3 times.

4.3.11.3 Addng or takng out laundry

1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up

light of the relevant step during which the machine was switched into the pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the Loading Door and add or take out the laundry.

5. Close the Loading Door.

6. Make changes in auxiliary functions, temperature and speed settings if necessary.

7. Press Start/Pause button to start the machine.

4.3.12 Chld Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid

any changes in a running programme.

You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on

the machine again, programme will resume from where it has stopped.

20 / EN

Washing Machine / User’s Manual

4.3.12.1 To actvate the chld lock:

Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on

the panel, "Child lock enabled" light will turn on. You can release Auxiliary Function button 2 when

this warning is displayed.

4.3.12.2 To deactvate the chld lock:

Press and hold Auxiliary Function button 2 for 3 seconds. In the programme selection display on

the panel, "Child lock enabled" light will turn off.

4.3.13 Cancelng the programme

The programme is cancelled when the machine is turned off and on again. Press and hold On / Off

button for 3 seconds.

If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should

cancel the Child Lock first.

If you want to open the loading door after you have cancelled the programme but it is not possible to open

the loading door since the water level in the machine is above the loading door opening, then turn the

Programme Selection knob to Pump+Spin programme and discharge the water in the machine.

4.3.14 End of programme

End LED appears on the display when the programme is completed.

If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all

indicators are turned off.

Completed programme steps will be displayed if you press On / Off button.

4.3.15 Your machne features "Standby Mode".

After you switch on your machine with On-Off button, if no program is started or no other procedure

is performed at the selection step or no action is taken within approx. 10 minutes after the selected

program ends, your machine will switch to OFF mode automatically. Display and all indicators are

turned off. Selected programme data will be displayed if you press On / Off button. Before you start

the program, check the accuracy of your selections. If necessary, repeat them. This is not an error.

Страница загружается ...

Beko WMY 81283 PTLMB2 Руководство пользователя

Бренд: Beko

Модель: WMY 81283 PTLMB2

Категория: Стиральные машины

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

на других языках

English: Beko WMY 81283 PTLMB2 User manual

Beko WMY 81283 PTLMB2 Руководство пользователя

Beko WMY 81283 PTLMB2 Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов