Hyundai H-CCR4702M Black/White Руководство пользователя

Бренд: Hyundai

Модель: H-CCR4702M Black/White

Категория: Видеосистемы для автомобилей

Тип: Руководство пользователя

МУЛЬТИМЕДИЙНЫЙ

РЕСИВЕР 2 DIN

С МОТОРИЗОВАННЫМ

7” TFT-ДИСПЛЕЕМ

2 DIN MULTIMEDIA

RECEIVER WITH

MOTORIZED 7” TFT DISPLAY

Руководство по эксплуатации Instruction manual

H-CCR4702M

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation/Connection

Installation

General notes

Mounting

Detachable control panel

Anti-theft system

Connection

Connection diagram

Using the ISO Connector

ISO connection table

Parking wire connection

Reverse driving cable connection

Operation

Control elements

Front panel

Remote controller

Changing the battery

General operations

Touch screen

Turning the unit on/off

Reset the unit

Volume control

Setting the sound characteristics

Mute function

Mode selection

Angle setting

AV in jack

Subwoofer

System setup

Sound presets

Settings page

Radio operations

User interface of Radio mode

Band selection

Manual/automatic tuning

Programming tuner stations

Auto memory store

AF (Alternative frequencies) function

TA (Traffic alarm) function

Program type (PTY)

TV tuner operations

USB/SD/MMC operations

USB/SD/MMC notes

Inserting a memory card/USB device

Music mode touch interface

Play/pause

Selecting tracks

Fast forward/rewind

Repeat playback

Movie mode touch interface

Rotate function

Zooming in/out

ID3 tag function

Photo mode touch interface

Cleaning the unit body

Accessories

Troubleshooting guide

Specification

Before you start

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you

will ensure that your disposed product undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health.

Utilization of the product

Important safeguards

• Read carefully through the manual to

familiarize yourself with this unit.

• Keep this manual handy as a reference

for operating procedures and precautions. Do

not allow persons who have not read through

this manual to use this unit.

• Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also,

damage to this unit, smoke, and overheating

could result from contact with liquids or dust.

Protect this unit from moisture.

• Make sure that foreign objects do not get

inside the unit; they may cause malfunctions,

or create safety hazards such as electrical

shock or laser beam exposure.

• The beginning of operation is the moment

of the unit installation. Before use the device

in winter it is recommended to heat up the

passenger compartment during 20 seconds or

to the operation temperature.

• Using the unit with the temperature that

goes beyond the operation temperature greatly

decreases the operation resource of the screen

and other components of the unit and can

result in an outage.

• Disconnect the vehicle’s negative battery

terminal while mounting and connecting the

unit.

• The unit is designed for negative

terminal of the battery, which is connected

to the vehicle metal. Please ensure it before

installation.

• When replacing the fuse, be sure to use

one with an identical amperage rating. Using a

fuse with a higher amperage rating may cause

serious damage to the unit.

• Do not allow the speaker wires to be

shorted together when the unit is switched

on. Otherwise it may overload or burn out the

power amplifier.

• Make sure you disconnect the power

supply and aerial if you will not be using

the system for a long period or during a

thunderstorm.

• Make sure you disconnect the power

supply if the system appears to be working

incorrectly, is making an unusual sound, has

a strange smell, has smoke emitting from it

or liquids have got inside it. Let a qualified

technician check the system.

• Always keep the volume low enough so

that you can hear sounds from outside the

vehicle.

• Should this product fail to operate

properly, contact your dealer or nearest service

center.

Installation/Connection

Installation

General notes

• Choose the mounting location where the

unit will not interfere with the normal driving

function of the driver.

• Before finally installing the unit, connect

the wiring and make sure that the unit works

properly.

• Consult with your nearest dealer if

installation requires the drilling of holes or other

modifications of the vehicle.

• Install the unit where it does not get in the

driver’s way and cannot injure the passenger if

there is a sudden stop, like an emergency stop.

• If installation angle exceeds 35° from

horizontal, the unit may not perform properly.

• Avoid installing the unit where it would

be subject to high temperature, such as from

direct sunlight, or from hot air, from the heater,

or where it would be subject to dust, dirt or

excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either

from ‘Front’ (conventional DIN Front-mount) or

‘Rear’ (DIN Rear-mount installation, utilizing

threaded screw Holes at the sides of the unit

chassis). For details, refer to the following

illustrated installation methods.

1. DIN front-mount (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut (5 mm)

5. Spring washer

6. Screw (5 х 25 mm)

7. Metal strap

8. Flat washer

182

1. Install the sleeve into the dashboard;

ensure it is installed with the correct side and

there are no obstacles (wires, dashboard

elements, etc) for the unit installation.

2. After installing the sleeve into the

dashboard, bend tabs fitting to the size of the

dashboard to fix the sleeve in place.

3. Use the metal strap to fix the rear side of

the unit. Determine a place for fixing and install

the strap as shown in the picture. You can bend

the strap to the needed angle with your hands.

4. Make the necessary wire connections.

Ensure the connections are correct.

5. Install the unit into the sleeve and screw in

four frontal screws.

Dismantling the unit

a – Trim frame

b – Frame uninstall direction

c – Screws to be taken out

Installation/Connection

1. Switch off the unit and detach the front

panel.

2. Insert your fingers into the groove in the

front side of the trim frame (apply some effort to

detach the frame). Pull the frame to detach it.

3. Unscrew the four frontal screws nad pull

out the unit from the sleeve towards yourself.

Before detaching the unit, ensure it is not fixed

with the metal strap.

Trim frame installation

To install the trim frame, press it to the unit

body and push it to fix it in place. This should

be done before installing the front panel;

otherwise you are not able to install the trim

frame. When the trim frame being installed,

the side with the groove should face down and

fixed first.

2. DIN rear-mount (Method B)

For this method, use the screw holes in the

lateral sides of the unit. Fix the unit with the

help of the factory radio mounting brackets.

1. Select a position in which the screw holes

of the brackets (3) are aligned with the screw

holes in the unit body, and screw in two screws

(2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

The outer trim frame and mounting

sleeve are not used for method of installation.

Detachable control panel

Put the right fixing hole of the panel onto the

locker on the right side of the body, then press

on the left part of the panel until a click.

To detach the front panel, press REL button.

When it unfastens, carefully pull the panel out.

The control panel can easily be

damaged by shocks. After removing it, place

it in a protective case and be careful not to

drop it or subject it to strong shocks. The rear

connector that connects the main unit and the

control panel is an extremely important part. Be

careful not to damage it by pressing on it with

fingernails, pens, screwdrivers, etc.

If the control panel is dirty, wipe off the

dirt with soft, dry cloth only. And use a cotton

swab soaked in isopropyl alcohol to clean the

socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in

the included protective case when not in used

and carried away when you leave the vehicle

to deter theft.

Switch off the power of the unit. Detach the

front panel, then put it to the protective case

and take it with you.

Installation/Connection

Connection

Connection diagram

Line out-R

Line out-L

Using the ISO Connector

1. If your car is equipped with the ISO

connector, then connect the ISO connectors as

illustrated.

2. For connections without the ISO

connectors, check the wiring in the vehicle

carefully before connecting, incorrect connection

may cause serious damage to this unit.

Cut the connector, connect the colored leads

of the power cord to the car battery as shown

in the colour code table below for speaker and

power cable connections.

1. 2.

Installation/Connection

ISO connection table

Location Function

Connector A Connector B

1 - Rear right (+) - Purple

2 Reverse/Pink Rear right (-) - Purple/Black

3 Parking/Brown Front right (+) - Grey

4 Battery +12V/Yellow Front right (-) - Grey/Black

5 Antenna/Blue Front left (+) - White

6 - Front left (-) - White/Black

7 Ignition/Red Rear left (+) - Green

8 Ground/Black Rear left (-) - Green/Black

Power antenna wire is intended for power supply of the antenna and for remote control of

an additional amplifier.

Installation/Connection

Parking wire connection

Parking brake lead

Brake light

Car frame

Battery

Brown Wire

If Parking cable is connected to hand brake switch, the video display of the TFT monitor will be

controlled by driving status, system setup and input video sources. When the car is moving ahead,

if the video disc is played, the screen shows “ATTENTION!! You cannot use this function while

driving”, and blank screen. The above warning screen will prevent the driver from watching images.

Reverse driving cable connection

Car frame

Rear view video camera lead

Reverse driving light

Gearbox

Pink wire

Battery

If the rear view video camera is connected, the unit automatically switches to CAMERA source

during reverse driving. The unit returns to the original work mode after the reverse driving is done.

Operation

Control elements

Front panel

1. TFT display

2. MENU button

3. IN/OUT button

4. TILT button

5. AF/TA button

6. PTY button

7. LCD display

8. AMS button

9. OPEN button

10. MODE button

11. REL button

12. VOL regulator/SEL button

13. POWER/MUTE button

14. button

15. button

16. button

17. AV input

18. SD/MMC card slot

19. IR sensor

20. MDC button

21. USB port (under plastic cover)

1 2 3 4

5 6 7 8 9

10 11 12 13 14 15 16

20 21 22 23

Operation

Remote controller (RC)

GO TO

1. MENU button

2. PWR/MUTE button

3. UP cursor button

4. MODE button

5. ENTER button

6. button

7. DOWN cursor button

8. RPT button

9. MOVIE/TA button

10. MUSIC/AF button

11. Digit buttons

12. button

13. OPEN button

14. AUDIO button

15. SUB-T button

16. button

17. VOL+ button

18. SEL button

19. VOL- button

20. PHOTO/PTY button

21. ZOOM/GO TO button

22. SCALE/ROTATE button

23. TILT button

Changing the battery

1. Press the catch and at the same time pull

out the battery tray.

2. Insert the 1 lithium battery, type CR2025

(3 V) battery with the stamped (+) mark facing

upward. Insert the battery tray into the remote

controller.

• Store the battery where children

cannot reach. If a child accidentally swallows

the battery, consult a doctor immediately.

• Do not recharge, short, disassemble or

heat the battery or dispose it in a fire.

• Do not expose or bring into contact the

battery with other metallic materials. Doing this

may cause the battery to give off heat, crack or

start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the

battery may give off heat, crack or start a fire.

• Please direct the Remote controller to the

IR sensor of the front panel.

General operations

Touch screen

Due to the touch screen, you can fulfill most

functions not only by pressing buttons but also

by touching the options you need.

Turning the unit on/off

Press PWR/MUTE button on the front panel

or on the RC to turn the unit on. Press and hold

PWR/MUTE button on the front panel or on the

RC to turn the unit off.

Reset the unit

Operating the unit for the first time or after

replacing the car battery, you must reset the

Operation

unit. Press reset button on the unit with a

pointed object (such as a ballpoint pen) to set

the unit to initial state.

When some errors occur on the display,

you can also press reset button to resume to

normal, and it will erase the clock setting and

some memorized functions.

Volume control

Press VOL+/VOL- buttons on the RC or on

the unit to increase/decrease the sound level.

Setting the sound characteristics

Press SEL button to switch between the

following settings: Volume->BAS->TRE->BAL-

>FA->EQ->LOUD.

Mute function

Press MUTE button on the RC or PWR

button on the unit to turn off the sound. Press

the button again or adjust volume to resume

the sound output.

Mode selection

• Repeatedly press MODE button on the

RC or on the panel to select a mode: Radio =>

USB => SD => TV => AV-in.

• In any mode touch right top corner of the

screen or press MENU button to display the

Main menu as follows:

In the menu, touch the item of the mode you

need to select the corresponding mode.

The USB and SD modes are only

available when a USB or SD/MMC card is

inserted into the unit.

Angle setting

Press repeatedly TILT button on the front

panel to adjust the desired angle of the

monitor.

Please do not adjust the monitor tilt

manually, otherwise it can get damaged.

AV in jack

AV jack is intended to receive audio and video

signals by connecting to external device.

Subwoofer

Connect a subwoofer to this unit using the

Subwoofer output of this unit. For subwoofer

operation an external amplifier is required.

System setup

Sound presets

Press SEL button to switch between modes:

• Volume: Adjust the sound volume level.

• Bass: Adjust the low-frequency level.

• Treble: Adjust the high-frequency level.

• Balance: Adjust the balance between left

and right channels.

• Fader: Adjust the balance between front

and left channels.

• EQ: Select Flat, Classic, Pop, Rock or

User equalizer mode.

• Loud: Selecting loudness ON will

emphasize the low frequency output.

Settings page

Operation

• Language: Select the menu language.

• Date: Input current date.

• Clock mode: select 12-hour or 24-hour

clock display mode.

• Time: A touchable keyboard is displayed.

Input the current time and touch OK to confirm.

• Repeat: Select the repeat preset for

playback.

• Area: Select your region.

• Output: Select the video system.

Radio operation

User interface of Radio mode

When the unit is switched to Radio mode,

the below touchable user interface will be

displayed on the screen:

1. BAND button. Touch to select bands.

2. button. Touch for automatic or manual

search of the nearest station downwards.

3. button. Touch for automatic or manual

search of the nearest station upwards.

Band selection

Press BAND icon on the screen to switch to

the bands in the following order: FM1 - FM2 -

OIRT - MW1 - MW2.

Manual/automatic tuning

• Manual tuning: press / icons on

the screen or and buttons on the RC

repeatedly to select a frequency downward or

upward step by step.

• Automatic tuning: press and hold /

icons on the screen or and buttons on

the RC, the automatic search will start. It will

play when finds the station.

Programming tuner stations

You can store and recall stations for each

band (18 FM, 12 MW). Press a preset button,

then select a frequency. The station will be

saved in the memory under the corresponding

number. To recall a stored station, press the

corresponding preset icon.

Auto memory store

Auto store: Select a band, press and hold

AMS icon on the screen to enter auto store

mode. The radio will automatically store 6

stations to the 6 preset memories of the current

band. To stop auto store, press the AMS icon.

During auto station preset, the unit will

search and store stations with the strong signal

first, and then weaker signal stations until the

memories are full.

AF (Alternative frequencies) function

Press and hold MUSIC/AF button on the RC or

press AF/TA button on the panel to turn on/off

the AF function. If the AF function is on, the

display will show “AF”. Press and hold /

icons on the screen to search AF. When AF is

on, it means that RDS information is received;

when AF symbol is flashing, it means RDS

information is not yet received. If RDS is not

available in your area, turn off the AF mode.

AF indicator on the display will flash until

RDS information is received. If RDS service is

Operation

not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Enable or disable TA mode by pressing and

holding MOVIE/TA button on the RC or AF/

TA button on the panel. This function is OFF

by default. When TA function is activated,

it will search the station with TA information

automatically. If there is no TA information,

it will search the station with TP information

automatically. If there is no TP information

either, it will return to the previous station after

searching.

Program type (PTY)

This function allows to select the type of

program required, and will search for a station

broadcasting that type of program. Press and

hold PHOTO/PTY button on the RC or press

PTY button on the front panel to turn on the

PTY function. Repeatedly press VOL+/- button

on the RC or rotate the volume knob to choose

different programs available and then press

ENTER button on the RC to confirm. If PTY

code is different or not available, the device will

automatically exit to normal mode.

TV tuner operation

• Connect a TV antenna to the TV antenna

jack of the unit. Select TV mode.

• Press MENU button on the RC or front

panel to enter TV mode, then press and hold

MENU button on the RC or front panel to enter

TV menu. Press UP/DOWN cursor buttons on

the RC or touch the corresponding icons on

the screen to select the items you want to set.

Press or button on the RC or touch

the icons on the screen to select the selection.

Press the RETURN icon on the screen to exit

the menu.

SETTINGS

• Color: PAL DK ->PAL BG->PAL I->PAL

B->PAL BH->PAL M->PAL N->SECAM DK-

>SECAM BG->NTSC M

• Band: VHF->UHF->VLF

AUTO PROGRAM

Press UP/DOWN buttons on the RC to select

Auto Scan, then press ENTER button on the

RC to start search TV program, press again

to stop searching. Also you can touch the

AUTO SCAN icon on the screen. The search

range is the current TV frequency range. The

stations found will be stored into the memory

automatically.

MANUAL PROGRAM

Press UP/DOWN button on the RC to select

Step, Press or buttons on the RC or

on the front panel to search the TV program.

Press or button on the

RC or on the front panel during the playback to

change the TV program.

USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 1.1/2.0. Capacity: up

to 32 Gb.

For correct and satisfactory operation,

licensed SD/MMC memory cards of famous

brands should be used with this unit. Avoid

using memory cards of unknown brands.

Capacity: up to 32 Gb.

According to the USB 1.1/2.0 Standard,

usage of a USB device with power current

consumption exceeding 500 mA is not

recommended without supplementary power

supply. Failure to use supplementary power for

connected USB drives with power consumption

exceeding this value as well as defective

USB drives may cause mechanical or thermal

changes of elements of this unit as well as

failure of internal elements of the USB port.

Such damages are not warrantee cases.

Warning: usage of external USB drives

containing BIN files in the root directory may

cause malfunction of the unit or damage to the

software.

Inserting an SD/MMC card/USB device

Operation

Insert an SD/MMC memory card into the

card slot on the front panel. Open the lid and

insert a USB into the USB slot. Then the

playing mode will be changed into Card or USB

mode automatically. The first card/USB device

track playback will start.

When SD/MMC card and USB device are

both inserted, the playing mode will be changed

into the mode of the device inserted later.

Music mode touch interface

In any mode, press MUSIC AF button on the

RC to select the music mode; the screen will

show following interface:

Touch the corresponding track icon on the

screen to select the desired track. Press RPT

button on the RC to select repeat playback

mode.

Play/pause

The unit will automatically play from the

first sound track recorded on a SD/MMC/USB

device. To ensure good system performance,

wait until the unit finishes reading the device

information before proceeding. Press button

on the RC or on the panel to pause playback,

press it again to resume playback.

Selecting tracks

During playback press button on the RC

or button on the panel or on the screen to

play the previous track. Press button on

the RC or button on the panel or on the

screen to play the next track. During music or

video playback, press ZOOM/GOTO button

on the RC to select playback track or chapter.

Then a time search message box will display

on the screen. Input the start time you want

the track or chapter to start. Press ENTER to

confirm. The track or chapter will start from the

time you set.

Fast forward/rewind

Press and hold or buttons on the

RC or or buttons on the panel or

corresponding buttons on the screen for fast

backward or forward playing correspondingly.

When fast backward/forward playback

reaches the previous or next track, the unit will

resume normal playback.

Repeat playback

Press RPT button repeatedly for repeat

playing in different modes.

Movie mode touch interface

In any mode, press VIDEO/TA button on the

RC to select the movie mode; the screen will

show following interface:

When USB and SD card are inserted, touch

the USB or SD CARD icon on the top of the

screen to select USB or SD CARD mode.

• Press SCALE/ROTATE button on the RC to

set screen size.4:3 /16:9/Auto.

• When the movies include more audio

channels than one, repeatedly press AUIDO

button on the RC to select audio type.

• If the movie supports multi-language subtitle,

press SUB-T button on the RC repeatedly to

Operation

Cleaning the unit body

Wipe with a soft cloth. If the cabinet is very

dampen (not dripping wet) use the cloth with a

weak solution of soapy water, and then wipe

clean.

Accessories

1. Receiver 1 pc

2. Front panel 1 pc

3. Protective bag 1 pc

4. Remote controller 1 pc

5. ISO connector 1 pc

6. RCA cable 1 pc

7. AV IN cable 1 pc

8. Mounting parts:

Rubber cushion 1 pc

Mounting sleeve 1 pc

Outer trim ring 1 pc

Mounting strap 1 pc

Bolt 1 pc

Screw 20x5 1 pc

Nut M5 1 pc

Flat washer 1 pc

Spring washer 1 pc

Bolt M5x6 4 pcs

9. Consumer information 1 pc

10. Warranty card 1 pc

11. Instruction manual 1 pc

switch among supported languages.

• Press MENU button to show file list.Touch

the icon on the screen to return to previous

menu page.

Rotate function

Press SCALE/ROTATE button on the RC to

rotate picture, Rotate 90-> Rotate 180-> Rotate

270->normal.

Zooming in/out

During playback of images on USB/SD/

MMC, press repeatedly ZOOM button on

the RC, the picture will be zoomed in the

sequence: Normal => x1 => x2 => x3.

ID3 Tag function

If a MP3 file has ID3 tag information in the

supported ID3 format, such information will be

displayed on the display during the playback.

Photo mode touch interface

In any mode, press PHOTO/PTY button on

the RC to select the photo mode; the screen

will show following interface:

During photo playback, touch the screen. The

following control button will appear on the

screen:

• Previous/Next;

• Play/Stop;

• Zoom;

• Rotate;

Touch corresponding buttons to confirm

operations.

General information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No power The car ignition is not on. If the power supply is properly connected

to the car accessory switch the ignition

key to “ACC”.

The fuse is blown. Replace the fuse.

No sound Volume is in minimum. Adjust volume to a desired level.

Wiring is not properly

connected.

Check wiring connection.

Bad sound quality The installation angle is more

than 35 degrees.

Adjust the installation angle to less than

35 degrees.

Buttons do not

work

The built-in microcomputer is

not operating properly.

Reset the unit with the help of RESET

button.

Front panel is not properly fix

into its place.

Install the front panel properly.

The radio does

not work

The antenna cable is not

connected.

Insert the antenna cable properly.

The radio station

automatic tuning

does not work

The signals are too weak.

Select stations manually.

General information

Specifications

General

Power supply: 12 V DC

Maximum power output: 4 x 50 W

Dimensions 165 x 50 x 178 mm

Mounting angle 0 to +/-30

Working temperature range -10

С - +60

Display

Display Motorized 7” TFT

Resolution: 800 x 480

Aspect ratio: 16:9

Contrast ratio: 400:1

Brightness: 450 cd/m

View angle: 120

FM Stereo Radio

Frequency range: 65.0 – 74.0/87.5 – 108.0 MHz

Preset memory stations: 18

MW Radio

Frequency range: 522 kHz - 1620 kHz

Preset memory stations: 12

TV Tuner

Color System: PAL/SECAM/NTSC

Tuning Range: 41.25 - 801.25 MHz

Terminals

Stereo output RCA (1.8V±0.2) 2

Video input 1

Audio input 2

Subwoofer pre-out 1

Rear view camera input 1

USB port 1

Specifications are subject to change without notice. Dimensions are approximate.

Содержание

Уважаемый покупатель!

Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-

пасно пользоваться Вашей моделью изделия, рекомендуется тщательно изучить на-

стоящее руководство перед подключением, регулировкой и эксплуатацией изделия.

Сохраняйте руководство для использования в будущем.

Содержание

Перед началом эксплуатации

Утилизация изделия

Меры предосторожности

Установка/Подключение

Установка

Общая информация

Установка устройства в приборную

панель

Операции со съемной панелью

Система против кражи

Подключение

Схема электрических соединений

Использование разъема ISO

Таблица проводов ISO-коннектора

Подключение парковочного провода

Подключение провода фонаря за-

днего хода

Управление устройством

Передняя панель

Пульт дистанционного управления

Замена батарей в ПДУ

Основные операции

Сенсорный дисплей

Включение/выключение устройства

Сброс настроек устройства

Регулирование громкости

Регулировка параметров звука

Отключение звука

Выбор режима работы

Угол наклона монитора

Аудио-видеовход

Сабвуфер

Настройка системы

Страница настроек звука

Страница настроек

Операции с радио

Интерфейс режима радио

Переключение диапазонов

Ручной/автоматический поиск

Сохранение и вызов радиостанций

Автоматическое сохранение

Функция AF (альтернативные частоты)

Функция TA (программы о дорожном

движении)

Функция PTY (тип программы)

Операции с ТВ-тюнером

Настройки

Операции с USB/SD/MMC

Примечания по USB/SD/MMC-разъему

Загрузка/извлечение USB-

накопителя/карты памяти

Интерфейс режима аудио

Воспроизведение/пауза

Выбор трека

Перемотка вперед/назад

Повторное воспроизведение

Интерфейс режима видео

Поворот

Изменение масштаба

ID3-теги

Интерфейс режима фото

Общая информация

Чистка корпуса устройства

Комплект поставки

Руководство по устранению

неисправностей

Технические характеристики

Перед началом эксплуатации

Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с

обычным бытовым мусором. Существует отдельная система сбора использованных

электронных изделий в соответствии с законодательством, которая предполагает

соответствующее обращение, возврат и переработку.

Обращайтесь в органы местного управления за инструкциями по правильной

утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с

соблюдением обязательных процедур по обработке, утилизации и вторичной пере-

работке и, таким образом, предотвратите потенциальное негативное воздействие на

окружающую среду и здоровье людей.

Утилизация изделия

Меры предосторожности

• Внимательно изучите данное руковод-

ство, чтобы ознакомиться с устройством.

• Держите данное руководство под

рукой в качестве справочника по правилам

эксплуатации и мерам предосторожности.

Не допускайте к использованию устройства

посторонних лиц, не ознакомившихся и не

усвоивших данные инструкции по эксплуа-

тации.

• Не допускайте попадания жидкости

на устройство. Это может повлечь пора-

жение электрическим током. Кроме того,

попадание жидкости или пыли в устройство

может стать причиной его выхода из строя,

перегрева и появления дыма. Оберегайте

устройство от воздействия влаги.

• Убедитесь, что внутрь устройства не

попали посторонние предметы. Они могут

вызвать сбои в работе или стать причиной

возгорания или поражения лазерным лучом.

• Началом эксплуатации устройства счи-

тается момент его установки в автомобиль.

Перед началом использования устройства

в зимний период рекомендуется прогреть

салон автомобиля в течение 20 минут или

до достижения эксплуатационного диапазо-

на температуры устройства.

• Использование устройства при темпе-

ратуре, выходящей за рамки эксплуатаци-

онного диапазона температур, значительно

снижает ресурс работы экрана и других

компонентов устройства и может привести

к выходу устройства из строя.

• При установке и подключении устрой-

ства отключите отрицательную клемму

аккумулятора автомобиля.

• Устройство разработано таким обра-

зом, чтобы отрицательный вывод аккумуля-

тора был подключен к корпусу транспортно-

го средства. Пожалуйста, убедитесь в этом

перед установкой.

• При замене предохранителя, убеди-

тесь, что вы устанавливаете предохра-

нитель с тем же номиналом. Используя

предохранитель с повышенным значением

тока, можно причинить значительные по-

вреждения устройству.

• Не позволяйте проводам динамиков

соприкасаться друг с другом или с корпу-

сом автомобиля после включения устрой-

ства. В противном случае усилитель может

быть перегружен или выйти из строя.

• Убедитесь, что источник питания и

антенна отключены, если Вы не будете

пользоваться устройством в течение дли-

тельного времени или во время грозы.

• Убедитесь, что источник питания от-

Перед началом эксплуатации

ключен, если обнаружена неправильная

работа устройства, устройство издает неха-

рактерные звуки, запах, выделяет дым или

внутрь его попала жидкость. В этих случаях

необходим квалифицированный техниче-

ский осмотр устройства.

• Не устанавливайте уровень громкости,

заглушающий внешние звуки дорожной

обстановки и сигналы специального авто-

транспорта.

• При неполадках в работе устройства

свяжитесь с торговым представителем или

с ближайшим сервисным пунктом.

Страница загружается ...

Hyundai H-CCR4702M Black/White Руководство пользователя

Бренд: Hyundai

Модель: H-CCR4702M Black/White

Категория: Видеосистемы для автомобилей

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

на других языках

English: Hyundai H-CCR4702M Black/White User manual

Модели других брендов

SoundMax SM-CCR3081M Руководство пользователя

Hyundai H-CCR4702M Black/White Руководство пользователя

Hyundai H-CCR4702M Black/White Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов