BN68-01177Q-00
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Связывайтесь с SAMSUNG по всему миру
Если у вас есть предложения или вопросы по продуктам Samsung,
связывайтесь с информационным центром Samsung.
ТЕЛЕВИЗОР С
ЖИДКОКРИСТАЛ
ЛИЧЕСКИМ
ЭКРАНОМ
Руководство пользователя
Перед началом эксплуатации устройства
внимательно прочитайте настоящее руководство и
сохраните его для будущего использования.
LE20S81B
Country
Customer Care Centre
Web Site
RUSSIA 8-800-555-55-55 www.samsung.ru
UKRAINE 8-800-502-0000 www.samsung.ua
ЭКРАННЫЕ МЕНЮ
ДИСПЛЕЙ ПК
ТЕЛЕТЕКСТ
Зарегистрируйте устройство по адресу: www.samsung.com/global/register
Запишите здесь название модели и серийный номер для будущих справок.
▪ Модель _______________ ▪ Серийный номер _______________
CIS BWT-L02-Cover.indd 1 2007-08-22 ¿ÀÈÄ 4:48:04
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect
to the screen. Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
BN68-1177Q-Eng-0822.indd 1 2007-08-30 ¿ÀÈÄ 12:31:54
English - 1
CONNECTING AND PREPARING YOUR TV
List of Parts .................................................................2
Installing the Stand ..................................................... 2
Installing the Wall Mount Kit ....................................... 2
Viewing the Control Panel ..........................................3
Viewing the Connection Panel ....................................4
Viewing the Remote Control .......................................5
Installing Batteries in the Remote Control ..................6
Switching On and Off ..................................................6
Placing Your Television in Standby Mode ...................6
Plug & Play ................................................................. 6
SETTING THE CHANNELS
Storing Channels Automatically ..................................7
Storing Channels Manually .........................................8
Editing the Channels ..................................................9
Sorting the Stored Channels ......................................9
Assigning Channels Names .....................................10
Fine Tuning Channel Reception ............................... 10
SETTING THE PICTURE
Changing the Picture Standard ................................ 11
Adjusting the Custom Picture ................................... 11
Changing the Colour Tone ........................................12
Adjusting the Colour Control ....................................12
SETTING THE SOUND
Changing the Sound Standard ................................. 13
Adjusting the Volume Automatically ..........................13
Connecting headphones ...........................................13
SETTING THE TIME
Setting and Displaying the Current Time ..................14
Setting the Sleep Timer ............................................ 14
Switching the Television On and Off Automatically ...15
SETTING THE OTHERS
Choosing Your Language ......................................... 15
Setting the Blue Screen Mode ..................................16
Selecting the Source ................................................16
Editing the Input Source Names ...............................16
USING THE TELETEXT FEATURE
Teletext Decoder .......................................................17
Displaying the Teletext Information ........................... 17
Selecting a Specic Teletext Page............................ 18
Using Fastext to Select a Teletext Page ...................18
Storing Teletext Pages .............................................. 18
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) ...........................................19
Display Modes .......................................................... 19
Setting the PC ..........................................................20
RECOMMENDATIONS FOR USE
Troubleshooting:
Before Contacting Service Personnel .......................21
Technical and Environmental Specications ...........21
English
Contents
Symbol Press Important Note One-Touch
Button
English - 1
BN68-1177Q-Eng-0822.indd 1 2007-08-30 ¿ÀÈÄ 12:31:54
English - 2
CONNECTING AND PREPARING YOUR TV
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries
(AAA x 2)
Power Cord Cover-Bottom Stand Screw X 4 Stand Cleaning Cloth
Owner’s Instructions
Warranty card
Safety Guide
Registration Cards
Warranty card / Safety Guide /
Registration Cards (Not available in all locations)
➣
Installing the Stand
Installing the Wall Mount Kit
< 2 >
< 3 >
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
Wall mount items (sold separately) allow you to mount the TV
on the wall.
For detailed information on installing the wall mount, see the
instructions provided with the Wall Mount items. Contact a
technician for assistance when installing the wall mounted
bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others
if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is
turned on. It may result in personal injury due to
electric shock.
Remove the stand and cover the bottom hole with a cap and
fasten with two screws.
➣
M4 X L16
BN68-1177Q-Eng-0822.indd 2 2007-08-30 ¿ÀÈÄ 12:31:55
English - 3
Viewing the Control Panel
1 SOURCE
Toggles between all the available input
sources (
TV - Ext. - AV - S-Video - PC
). In
the on-screen menu, use this button as you
use the
ENTER
button on the remote
control.
2 MENU
Press to see an on-screen menu of your TV’s
features.
3
Press to decrease or increase the volume.
In the on-screen menu, use the buttons
as you use the
◄
and
►
buttons on the
remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the
▲
and
▼
buttons on
the remote control.
(Without the Remote Control, you can turn on
the TV by using the Channel buttons.)
5 Speakers
6 (Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on
the TV.
The product colour and shape may vary depending on the model.
➣
BN68-1177Q-Eng-0822.indd 3 2007-08-30 ¿ÀÈÄ 12:31:56
English - 4
Viewing the Connection Panel
Power Input
The product colour and shape may vary depending on the model.
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
3 Connecting External A/V Devices
- Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such
as VCR, DVD or Camcorder.
- Connect RCA audio cables (optional) to “R - AUDIO - L” on the rear of your set and the other
ends to corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (2) on the rear of your set. While the
head phone is connected, the sound from the built-in speakers will be disabled.
4
Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top
Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
5 Connecting Computer
- Connect the D- Sub cable (optional) to “PC IN (PC)” on the rear of your set and the other end to
the Video Card of your computer.
- Connect the stereo audio cable (optional) to “PC IN (AUDIO)” on the rear of your set and the
other end to “Audio Out” of the sound card on your computer.
6 Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a
public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
BN68-1177Q-Eng-0822.indd 4 2007-08-30 ¿ÀÈÄ 12:31:57
English - 5
Viewing the Remote Control
1
Television Standby button Teletext Functions
3
Teletext hold
6
Exit from the teletext display
7
Teletext index
8
Teletext sub page
9
Teletext display/mix both teletext
information and the normal
broadcast
0
Fastext topic selection
@
P : Teletext next page
P : Teletext previous page
#
Teletext mode selection
(LIST/FLOF)
$
Teletext reveal
&
Teletext store
*
Teletext size selection
2
Number buttons for direct
channel access
3
One/Two-digit channel
selection
4
: Volume increase
: Volume decrease
5
Temporary sound switch-off
6
Selects the TV mode directly
7
Displays the main on-screen
menu
8
Sound effect selection
!
Previous channel
@
P : Next channel
P : Previous channel
#
Available source selection
$
Use to see information on the
current broadcast
%
Exit the on-screen menu
^
Control the cursor in the menu
&
Automatic Power-off
(
Picture effect selection
)
Sound mode selection
The performance of the remote control may be affected by bright
light.
For details, refer to further instructions.
➣
➣
BN68-1177Q-Eng-0822.indd 5 2007-08-30 ¿ÀÈÄ 12:31:57
English - 6
The mains lead is attached to the rear of your set.
1.
Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2.
Press the POWER button on the front of the set.
The programme that you were watching last is reselected automatically.
3.
Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the lower-right panel.
When you switch the set on for the very first time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER button again.
➣
➣
➣
Switching On and Off
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.
Press the POWER button on the remote control.
The screen is turned off and a standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER
, numeric buttons (0~9) or channel
up/down (
/ ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example). It is best to unplug the set from the mains and aerial
.
➣
➣
Placing Your Television in Standby Mode
When the TV is initially powered on, several basic settings proceed
automatically and subsequently. The following settings are available.
1. Press the POWER button on the remote control.
The message “Запуск Plug & Play” is displayed with “OK” selected.
Press the ENTER button.
2. Select the appropriate language by pressing the
▲
or
▼
button.
Press the ENTER button to confirm your choice.
3. The message “Check antenna input.” is displayed with “OK”
selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
➣
Plug & Play
Plug & Play
1. Slide the cover out completely.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. The remote control can be used up to about 23 feet
from the TV. (Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
➣
➣
➣
Installing Batteries in the Remote Control
Вxод
Запуск Plug & Play
OK
BN68-1177Q-Eng-0822.indd 6 2007-08-30 ¿ÀÈÄ 12:31:58
English - 7
4. Select the appropriate country by pressing the
▲ or ▼
button.
Press the ENTER button to confirm your choice.
5. The “Auto Store” menu is displayed with the “Start” selected.
Press the ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears
Press the ENTER button at any time to interrupt the memorization
process.
6. Press the ENTER button.
Select the “Hour” or “Minute” by pressing the
◄ or ►
button.
Set the “Hour” or “Minute” by pressing the
▲ or ▼
button.
You can also set the hour and minute by pressing the number buttons
on the remote control.
7. Press the ENTER button to confirm your setting.
The message “Enjoy your viewing.” is displayed.
♦ Language: Select your language.
♦ Country: Select your country.
♦ Auto Store: Automatically scans for and stores channels available in the local
area.
♦ Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Plug & Play”, then press the
ENTER button.
3. This message “Start Plug & Play” is displayed. (Refer to page 6)
➣
➣
➣
SETTING THE CHANNELS
40MHz P1 C
--
VHF-L
0 %
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers.
However, you can sort numbers manually and clear any channels you
do not wish to watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the
ENTER button.
2. Press the ENTER button to select “Country”.
3. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
4. Press the ▲ or ▼ button to select “Auto Store”, then press the
ENTER button.
5. Press the ENTER button to select “Start”.
The TV will begin memorizing all of the available channels.
Press the ENTER button at any time to interrupt the memorization
process and return to the “Channel” menu.
6. After all the available channels are stored, the “Sort” menu appears.
(Refer to page 9)
➣
➣
Storing Channels Automatically
Be l gi um
Fr a nc e
Ge r ma ny
It a ly
Ne t he rl a nd s
Sp a in
Sw e de n
Sw i tz er l an d
Start
Enter Return
Move Enter Return
Auto Store
Country
Move Enter Return
Tim e
Pl u g & P la y
La n gu ag e : En gl i sh
Bl u e Sc r ee n : O ff
PC
Setup
BN68-1177Q-Eng-0822.indd 7 2007-08-30 ¿ÀÈÄ 12:31:59
English - 8
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Manual Store”, then press the
ENTER button.
3. Press the ENTER button to select “Programme”.
4. To assign a programme number to a channel, find the correct number
by pressing the ▲ or ▼ button and then press the ENTER button.
5. Press the ▲ or ▼ button to select “Colour System”, then press the
ENTER button.
6. Select the colour standard required by pressing the ▲ or ▼ button,
then press the ENTER button.
7. Press the ▲ or ▼ button to select “Sound System”, then press the
ENTER button.
8. Select the sound standard required by pressing the ▲ or ▼ button,
then press the ENTER button.
If there is an abnormal sound or no sound, re-select the sound system
required.
9. If you know the number of the channel to be stored, press the ▲ or
▼ button to select “Channel”. Press the ENTER button. Select
C (Air channel) or S (Cable channel) by pressing the ▲ or ▼ button.
Press the ► button to select channel. Select the required number by
pressing the ▲ or ▼ button and then press the ENTER button.
Channel mode: P (Programme mode)
C (Air channel mode)
S (Cable channel mode)
You can also set a channel number by pressing the number buttons on
the remote control.
10. If you do not know the channel numbers, press the ▲ or ▼ button to
select “Search”. Press the ENTER button.
Search by pressing the ▲ or ▼ button and then press the ENTER
button.
11. Press the ▲ or ▼ button to select “Store”, then press the ENTER
button.
Press the ▲ or ▼ button to select “OK”, then press the ENTER
button.
12. Repeat steps 3 to 11 for each channel to be stored.
♦ Programme: Selects a program number for the channel.
♦ Colour System: Sets the colour supporting system.
♦ Sound System: Sets the sound supporting system.
♦ Channel: Selects a channel.
♦ Search: Scans for the frequency value for the channel.
♦ Store: Saves your settings.
➣
➣
➣
Storing Channels Manually
Pr o gr am m e : P1
Co l ou r S ys t em : AU TO
So u nd S y st e m : B G
Ch a nn el : C- -
Se a rc h : 40 M Hz
St o re : ?
Move Enter Return
Manual Store
BN68-1177Q-Eng-0822.indd 8 2007-08-30 ¿ÀÈÄ 12:31:59
English - 9
You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are
displayed during scanning.
1. Use the number buttons to directly select the channel that will be
added or deleted.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Add/Delete”, then press the
ENTER button.
4. Repeatedly pressing the ENTER button will alternate between add
channel and delete channel.
5. Press the P or P buttons to switch to the appropriate channel,
then repeat above.
6. Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the
number buttons on the remote control.
➣
Editing the Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Sort”, then press the ENTER
button.
3. Press the ENTER button to select “From”. Press the ▲ or ▼
button until the channel number that you wish to change is displayed.
Press the ENTER button.
4. Press the ▲ or ▼ button to select “To”, then press the
ENTER button.
Press the ▲ or ▼ button until the new number by which you wish to
identify the channel is displayed.
Press the ENTER button.
5. Press the ▲ or ▼ button to select “Store”, then press the
ENTER button.
Press the ▲ or ▼ button to select “OK”, then press the
ENTER button.
The selected channel is exchanged with the one previously stored to the
chosen number.
6. Repeat steps 3 to 5 for another channel to be sorted.
7. Press the EXIT button to exit.
➣
Sorting the Stored Channels
Change Enter Return
Add/Delete
Add
P1 Not in Memory
Fr o m : P1
To : P - -
St o re : ?
Move Enter Return
Sort
BN68-1177Q-Eng-0822.indd 9 2007-08-30 ¿ÀÈÄ 12:32:00
English - 10
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the ▲ or ▼
button to select “Channel”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Name”, then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new name by
pressing the ▲ or ▼ button. Press the ENTER button.
4.
To... Then...
Select a letter, number or symbol
Press the ▲ or ▼ button
Move on the next letter
Press the ► button
Move back the previous letter
Press the ◄ button
Confirm the name Press the ENTER button
The characters available are : Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters ( -, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
➣
P1
Assigning Channels Names
Use fine tuning to manually adjust a particular channel for optimal
reception.
1. Use the number buttons to directly select the channel that you want
to fine tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Fine Tune”, then press the
ENTER button.
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “*”
on the right-hand side of the channel number in the channel banner. And
the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the ▲ or ▼ button and
then press the ENTER button.
➣
➣
Fine Tuning Channel Reception
Move Enter Return
Name
Pr o g. Ch . Na me
▲
1 C- - -- - --
2 C- - -- - --
3 C- - -- - --
4 C- - -- - --
5 C- - -- - --
▼
Adjust Save Return
Move
Reset
Fine Tune
00
BN68-1177Q-Eng-0822.indd 10 2007-08-30 ¿ÀÈÄ 12:32:00
English - 11
Co n tr as t 1 00
Br i gh tn e ss 45
Sh a rp ne s s 7 5
Co l ou r 55
Tin t
G5 0
R5 0
SETTING THE PICTURE
You can select the type of picture which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the ▲ or ▼
button to select “Picture”, then press the ENTER button.
2. Press the ENTER button to select “Mode”.
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
Custom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
[PC mode]
Entertain: High brightness. (For watching motion pictures such as a DVD or
Video CD.)
Internet: Medium brightness. (For working with a mixture of images such as
text and graphics.)
Text: Normal brightness. (For documentations or works involving heavy text.)
Custom: Select to view your favorite display settings.
In the PC mode, “Entertain”, “Internet”, “Text”, “Custom” appears.
➣
You can also press the
P.MODE button on the
remote control to select one
of the picture settings.
Changing the Picture Standard
Your set has several settings which allow you to control picture
quality.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Custom”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select a particular item.
Press the ENTER button.
4. Press the ◄ or ► button to decrease or increase the value of a
particular item. Press the ENTER button.
5. Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the back-
ground.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them
more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint(NTSC only): Adjusts the colour of objects, making them more red or
green for a more natural look.
If you make any changes to these settings, the picture mode is
automatically switched to “Custom”.
In the PC mode, only “Contrast” and “Brightness” can be adjusted.
➣
➣
Adjusting the Custom Picture
Dy n am ic
St a nd ar d
Mo v ie
Cu s to m
Move Enter Return
Mode
Move Enter Return
Custom
BN68-1177Q-Eng-0822.indd 11 2007-08-30 ¿ÀÈÄ 12:32:01
English - 12
You can select the most comfortable colour tone to your eyes.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Colour Tone”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select the desired colour tone setting.
Press the ENTER button.
4. Press the EXIT button to exit.
♦ Cool 2: Makes the colour temperature bluer than “Cool 1” menu.
♦ Cool 1: Makes whites bluish.
♦ Normal: Keeps whites white.
♦ Warm1: Makes whites reddish.
♦ Warm2: Makes the colour temperature redder than “Warm1” menu.
In the PC mode, “Cool” ,“Normal”, “Warm”, “Custom” appears.
➣
Changing the Colour Tone
Move Enter Return
Colour Tone
Co o l 2
Co o l 1
No r ma l
Wa rm 1
Wa rm 2
Adjust the individual R, G, B Colour Controls.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Colour Control”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select a particular item.
Press the ENTER button.
4. Press the ◄ or ► button to decrease or increase the value of a
particular item. Press the ENTER button.
5. Press the EXIT button to exit.
Available in PC Mode Only.
➣
Adjusting the Colour Control
Move Enter Return
Colour Control
Re d 0
Gr e en 19
Bl u e 50
BN68-1177Q-Eng-0822.indd 12 2007-08-30 ¿ÀÈÄ 12:32:02
English - 13
Each broadcasting station has its own signal conditions, and so it
is not easy for you to adjust the volume every time the channel is
changed.
This feature let you automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Auto Volume”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “On” or “Off”. Press the
ENTER button.
4. Press the EXIT button to exit.
Adjusting the Volume Automatically
SETTING THE SOUND
You can select the type of the special sound effect to be used when
watching a given broadcast.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the
ENTER button.
2. Press the ENTER button to select “Mode”.
3. Press the ▲ or ▼ button to select the desired sound effect.
Press the ENTER button.
4. Press the EXIT button to exit.
Standard: Selects the normal sound mode.
Speech: Emphasizes voices over other sounds.
Changing the Sound Standard
You can also select these
options by simply pressing
the S.MODE button on the
remote control.
Move Enter Return
Mode
St a nd ar d
Sp e ec h
Move Enter Return
Mo d e : St an d ar d
Au t o Vol um e : O n
Sound
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
Prolonged use of headphones at a high volume may damage your hearing.
➣
Connecting headphones
TV Rear Panel
BN68-1177Q-Eng-0822.indd 13 2007-08-30 ¿ÀÈÄ 12:32:02
English - 14
SETTING THE TIME
You can set the TV’s clock so that the current time is displayed
when you press the INFO button. You must also set the time if you
wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
2. Press the ENTER button to select “Time”.
3. Press the ENTER button to select “Clock Set”.
4.
To... Press the...
Move to “Hour” or “Minute”
◄ or ► button.
Set the “Hour” or “Minute”
▲ or ▼ button.
Confirm the setting ENTER button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the
remote control.
➣
➣
Setting and Displaying the Current Time
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to standby mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
2. Press the ENTER button to select “Time”.
3. Press the ▲ or ▼ button to select “Sleep Timer”, then press the
ENTER button.
4. Press the ▲ or ▼ button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180).
Press the ENTER button.
The TV automatically switches to standby mode when the timer reaches 0.
5. Press the EXIT button to exit.
➣
Setting the Sleep Timer
Press the SLEEP button
on the remote control
repeatedly until the
appropriate time interval
appears.
Move Enter Return
Clock Set
Ho u r Mi n ut e
0000
P1
Mo n o
Pi c tu re : Dy n am ic
So u nd : St a nd ar d
00 : 00
Cl o ck S e t 00: 00
Sl e ep Ti mer : Of f
On Ti m er : O f f
Of f T i me r : O f f
Move Enter Return
Time
BN68-1177Q-Eng-0822.indd 14 2007-08-30 ¿ÀÈÄ 12:32:03
English - 15
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your
choice at the time you select.
Switch off automatically at the time you select.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to elect “Setup”, then press the
ENTER button.
2. Press the ENTER button to select “Time”.
3. Press the ▲ or ▼ button to select “On Timer”, then press the
ENTER button.
4. Press the ▲ or ▼ button to adjust “Hour”, then press the ► button to
move to the next step.
Set other items using the same method as above.
When finished, press the ENTER button to return.
5. Press the ▲ or ▼ button to select “Off Timer”, then press the
ENTER button.
6. Press the ▲ or ▼ button to adjust “Hour”, then press the ► button to
move to the next step.
Set other items using the same method as above.
When finished, press the ENTER button to return.
7. Press the EXIT button to exit.
The first step is to set the television’s clock.
(refer to “Setting and Displaying the Current Time” on page 14)
You can also set hour and minute by pressing the number buttons on the
remote control.
The "Activation" setting must be set to "On" in order for the timers to
work.
➣
➣
➣
Switching the Television On and Off Automatically
SETTING THE OTHERS
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Language”, then press the
ENTER button.
3. Select a particular language by pressing the ▲ or ▼ button
repeatedly.
Press the ENTER button.
You can choose one of 12 languages.
4. Press the EXIT button to exit.
➣
Choosing Your Language
Move Adjust Return
On Timer
Ho u r M in ute
0000
Vo l um e
Pr o gr am m e
Ac t iv at i on
P 1 00 O ff
Move Adjust Return
Off Timer
Ho u r M in ute
0000
Ac t iv at i on
Off
Move Enter Return
En g li sh
De u ts ch
Fr a nç ai s
Ne d er la n d
Es p añ ol
It a li an o
Sv e ns ka
Po r tu gu ê s
Language
▼
BN68-1177Q-Eng-0822.indd 15 2007-08-30 ¿ÀÈÄ 12:32:04
English - 16
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to
continue viewing the poor picture, you must set the "Blue Screen"
mode to "Off".
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “Blue Screen” then press the
ENTER button.
3. Press the ▲ or ▼ button to select “On” or “Off”.
Press the ENTER button.
4. Press the EXIT button to exit.
Setting the Blue Screen Mode
You can select among external sources connected to your TV’s
input jacks.
1. Press the MENU button to display the menu.
Press the ENTER button to select “Input”.
2. Press the ENTER button to select “Source List”.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button.
Press the SOURCE button on the remote control to toggel between all the
available source. TV mode can be selected by pressing the TV or P /
button on the remote control but you cannot select it by pressing the SOURCE
button.
Selecting the Source
Name the device connected to the input jacks to make your input
source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2. Press the ▲ or ▼ button to select “Edit Name”, then press the
ENTER button.
3. Press the ▲ or ▼ button to input select input source that you wish to
edit.
Press the ENTER button.
4. Press the ▲ or ▼ button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
Editing the Input Source Names
Setup
Tim e
Pl u g & P la y
La n gu ag e : En gl i sh
Bl u e Sc r ee n : O n
PC
Move Enter Return
Source List
TV
Ex t . : -- --
AV : --- -
S- V id e o : -- --
PC : --- -
Move Enter Return
Edit Name
-- - -
VC R
DV D
Ca b le S T B
HD ST B
Sa t el li t e S TB
AV Re cei ve r
DV D R ec e iv e r
Move Enter Return
▼
BN68-1177Q-Eng-0822.indd 16 2007-08-30 ¿ÀÈÄ 12:32:05
English - 17
USING THE TELETEXT FEATURE
Most set channels carry “ teletext ”, pages of written
information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting station identity.
C
Current page number or search status.
D
Date and time.
E
Text.
F
Status information.
Teletext Decoder
You can display teletext information at any time, but signal
reception must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1. Using the P ( ) or P ( ) button, select the channel providing the
teletext service.
2. Press the TTX/MIX ( ) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed at any time by
pressing the MENU ( ) button.
3. Press the TTX/MIX ( ) button again.
The actual broadcast will be displayed simultaneously with the teletext
page on the screen.
4. Press the TV( ) button again to exit from the Text display.
If any broken character appears while Text is being viewed, make sure
that the Text language is identical with the language in the “Setup” menu
mode. If both languages are different, select the same language with the
Text language on the “Setup” menu.
➣
➣
➣
Displaying the Teletext Information
BN68-1177Q-Eng-0822.indd 17 2007-08-30 ¿ÀÈÄ 12:32:06
English - 18
Press the number buttons on the remote control to enter the page
number directly:
1. Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
2. If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the ( ). Press the ( ) button again to
resume.
3. Using the various display options:
To display... Press the...
Both teletext information and the normal broadcast TTX/MIX ( )
Hidden text (answers to quiz games, for example)
The normal screen
INFO ( )
INFO ( )
A secondary page, by entering its 4-digit number DUAL I-II ( )
The next page
The previous page
P ( )
P ( )
Double-size letters in the:
Upper half of the screen
Lower half of the screen
Normal screen
( )
Once
Twice
Three times
Selecting a Specic Teletext Page
The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.
1. Display the teletext contents page by pressing the
TTX/MIX ( ) button.
2. Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
3. Press the Red button to display the previous page.
Press the Green button to display the next page.
4. Press the TV ( ) button again to exit from the Text display.
Using Fastext to Select a Teletext Page
You can store up to four teletext pages to display them later at leisure.
1. Select the LIST mode using the SOURCE ( ) button.
The SOURCE ( ) button is used to switch between the LIST and
FLOF modes.
2. Press the coloured button corresponding to the page that will be
replaced.
3. Enter the new page number using the numeric buttons.
4. Repeat steps 2 and 3 for each page to be stored, using a different
coloured button each time.
5. Press the SLEEP ( ) button until the corresponding blocks blink.
➣
Storing Teletext Pages
BN68-1177Q-Eng-0822.indd 18 2007-08-30 ¿ÀÈÄ 12:32:07
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/
