Samsung LE52F96BD Руководство пользователя

BN68-01313E-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care centre.

Связывайтесь с SAMSUNG по всему миру

Если у вас есть предложения или вопросы по продуктам Samsung,

связывайтесь с информационным центром Samsung.

ТЕЛЕВИЗОР С

ЖИДКОКРИСТАЛ

ЛИЧЕСКИМ

ЭКРАНОМ

Руководство пользователя

Перед началом эксплуатации устройства

внимательно прочитайте настоящее руководство и

сохраните его для будущего использования.

ЭКРАННЫЕ МЕНЮ

ДИСПЛЕЙ ПК

КАРТИНКА В КАРТИНКЕ (PIP)

ТЕЛЕТЕКСТ

Зарегистрируйте устройство по адресу: www.samsung.com/global/register

Запишите здесь название модели и серийный номер для будущих справок.

• Модель _______________ • Серийный номер _______________

LE52F96BD

LE70F96BD

Country

Customer Care Centre

Web Site

RUSSIA 8-800-555-55-55 www.samsung.ru

UKRAINE 8-800-502-0000 www.samsung.ua

BN68-01313E-00L02-Cover.indd 1 2007-08-17 ¿ÀÈÄ 3:46:56

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect

to the screen. Damages caused by the above effect are not covered by the Warranty.

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

BN68-01313E-Eng-0817.indd 1 2007-08-17 ¿ÀÈÄ 4:26:04

Contents

CONNECTING AND PREPARING YOUR TV

List of Parts ......................................................... 3

Installing the Wall Mount Kit ................................ 3

Viewing the Control Panel ................................... 4

Viewing the Connection Panel ............................ 5

Viewing the Remote Control ...............................7

Installing Batteries in the Remote Control ........... 8

Switching On and Off .......................................... 8

Placing Your Television in Standby Mode ........... 8

Plug & Play .........................................................9

SETTING THE CHANNELS

Storing Channels Automatically ........................ 10

Storing Channels Manually ............................... 11

Adding / Locking Channels ............................... 12

Sorting the Stored Channels ............................. 13

Assigning Channels Names .............................. 13

Fine Tuning Channel Reception ........................ 14

LNA (Low Noise Amplier) ................................ 14

SETTING THE PICTURE

Changing the Picture Standard ......................... 15

Adjusting the Custom Picture ............................ 15

Changing the Colour Tone ................................ 16

Activating Backlight ........................................... 16

Conguring Detailed Settings on the Picture .... 17

Changing the Picture Size ................................18

Selecting the Screen Mode ............................... 18

Digital NR / Active Colour / DNIe /

LED SmartLighting / Movie Plus ....................... 19

Freezing the Current Picture ............................. 19

Resetting the Picture Settings to the Factory

Defaults ............................................................. 20

Viewing the Picture In Picture (PIP) .................. 20



SETTING THE SOUND

Sound Features ................................................21

Connecting Headphones .................................. 22

Selecting the Sound Mode ................................ 22

SETTING THE TIME

Setting and Displaying the Current Time ..........22

Setting the Sleep Timer ..................................... 23

Switching the Television On and Off

Automatically ..................................................... 23

FUNCTION DESCRIPTION

Choosing Your Language .................................. 24

Upgrading the Software .................................... 24

Game Mode/ Blue Screen / Melody /

Light Effect / Energy Saving /

HDMI Black Level / Feature Demo ...................25

Selecting the Source ......................................... 26

Editing the Input Source Names ....................... 26

USING THE DTV FEATURE

Previewing the DTV Menu System ................... 27

Updating the Channel List Automatically .......... 28

Updating the Channel List Manually ................. 28

Editing Your Favourite Channels ....................... 29

Selecting Channel List ...................................... 31

Displaying Programme Information ................... 31

Viewing the EPG (Electronic Programme Guide)

Information ........................................................ 32

Using the Scheduled List .................................. 33

Setting the Default Guide .................................. 33

Viewing All Channels and Favourite Channels . 34

Adjusting the Menu Transparency ....................34

Setting up the Parental Lock ............................. 35

Setting the Subtitle ............................................ 36

Setting the Subtitle Mode .................................. 36

Selecting the Audio Format ............................... 36

Selecting the Digital Text (UK only) ...................37

Selecting the Time Zone (Spain only) ............... 37

Viewing Product Information ............................. 37

Checking the Signal Information ....................... 38

Upgrading the Software .................................... 38

Viewing Common Interface ............................... 39

Selecting the CI (Common Interface) Menu ...... 39

Resetting ........................................................... 40

Selecting the Preferred Language

(Subtitle, Audio or Teletext) ............................... 40

Preference ........................................................41



English - 1

English

BN68-01313E-Eng-0817.indd 1 2007-08-17 ¿ÀÈÄ 4:26:05

English - 2

Symbol Press Important Note One-Touch

Button

USING THE TELETEXT FEATURE

Teletext Decoder ............................................... 41

Displaying the Teletext Information ................... 42

Selecting a Specic Teletext Page .................... 42

Using Fastext to Select a Teletext Page ........... 43

Setting Up Your Remote Control ....................... 43

Remote Control Codes .....................................44

SETTING THE PC

Setting up Your PC Software

(Based on Windows XP) .................................. 47

Display Modes ................................................. 47

Setting the PC .................................................. 48

Setting the Home Theatre PC .......................... 49

WISELINK

Using the WISELINK Function ......................... 50

Using the WISELINK Menu .............................. 51

Using the PHOTO (JPEG) List ......................... 52

Using the MP3 List ........................................... 55

Using the Setup Menu ..................................... 56

ABOUT ANYNET

+

What is Anynet

+

? ............................................ 57

Connecting Anynet

+

Devices ........................... 57

Setting Up Anynet

+ ..........................................

58

Scanning and Switching between

Anynet

+

Devices .............................................. 58

Recording ......................................................... 59

Listening through a Receiver ........................... 60

Check Points before Requesting Service ........ 60



RECOMMENDATIONS FOR USE

Wall-Mount Adjustment (Sold separately)

(LE52F96BD) ................................................... 61

Using the Anti-Theft Kensington Lock

(depending on the model) ................................ 62

Troubleshooting: Before Contacting

Service Personnel ............................................ 62

Technical and Environmental Specications ... 63



BN68-01313E-Eng-0817.indd 2 2007-08-17 ¿ÀÈÄ 4:26:05

English - 3

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Remote Control &

Batteries

(AAA x 2)

Power Cord Cover-Bottom Cleaning Cloth

Wall mount items (sold separately) allow you to mount

the TV on the wall.

For detailed information on installing the wall mount,

see the instructions provided with the Wall Mount items.

Contact a technician for assistance when installing the

wall mounted bracket.

Samsung Electronics is not responsible for any damage

to the product or injury to yourself or others

if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV

is turned on. It may result in personal injury due

to electric shock

Remove the stand and cover the bottom hole with a

cap and fasten with two screws.

Installing the Wall Mount Kit



Owner’s Instructions



Warranty card



Safety Guide



Registration Cards

Warranty card / Safety Guide /

Registration Cards (Not available in all locations)

BN68-01313E-Eng-0817.indd 3 2007-08-17 ¿ÀÈÄ 4:26:07

English - 4

Viewing the Control Panel

6 56

8

76

6

4

8

7

The product colour and shape may vary depending on the model.

Front Panel buttons

Touch the each button to

operate.

1 SOURCE

Toggles between all the available input

sources (TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2, HDMI3,

DTV). In the on-screen menu, use this button

as you use the ENTER/OK button on the

remote control.

2 MENU

Press to see an on-screen menu of your TV’s

features.

3

Press to decrease or increase the volume.

In the on-screen menu, use the

buttons as you use the

◄

and

►

buttons on

the remote control.

4

Press to change channels.

In the on-screen menu, use the

buttons as you use the

▼

and

▲

buttons on

the remote control.

(Without the Remote Control, you can turn on

the TV by using the Channel buttons.)

5 Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

6 Speakers

7 Remote Control Sensor

Aim the remote control towards this spot on

the TV.

8

(Power)

[LE52F96BD] Touch the silver sensor below

the ( ) mark to turn the TV on and off.

[LE70F96BD] Press to turn the TV on and off.

Silver sensor

BN68-01313E-Eng-0817.indd 4 2007-08-17 ¿ÀÈÄ 4:26:09

English - 5

Viewing the Connection Panel

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

1 EXT 1, EXT 2

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

2 AUDIO OUT(R-AUDIO-L)

- Connect RCA audio cables to AUDIO OUT "R-AUDIO-L" on the rear of your set and the other ends to

corresponding audio in connectors on the Amplifier or DVD Home Theatre.

3 HDMI IN 1, HDMI IN 2, HDMI IN 3

- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

- No additional Audio connection is needed for an HDMI to HDMI connection.

- When using an HDMI/DVI cable connection, you must use the HDMI IN2 jack.

What is HDMI?

- “High Definition Multimedia interface” allows the transmission of high definition digital video data

and multiple channels of digital audio (5. 1 channels).

- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable

(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,

has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports

multi - channel digital audio.

The TV may not output sound and pictures may be displayed with abnormal colour when DVD

players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When

connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack

and the audio cables to the DVI IN (HDMI2) "R-AUDIO-L" jacks on the back of the TV. If this happens,

contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI

version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

DVI IN (HDMI 2) (R-AUDIO-L)

- DVI audio outputs for external devices.

Connector

EXT 1

EXT 2

Video

o

Audio (L/R)

o

RGB

o

Output

Video + Audio (L/R)

Only TV or DTV output is available.

Output you can choose.

Input

1 2 3 4

5

3

6

7

8

90!@

The product colour and shape may vary depending on the model.

#

Power Input

[Side Panel Jacks]

BN68-01313E-Eng-0817.indd 5 2007-08-17 ¿ÀÈÄ 4:26:10

English - 6

Supported modes for HDMI/DVI and Component

HDMI/DVI 50Hz

HDMI/DVI 60Hz

Component

480i

X

O

480p

X

O

576i

X

O

576p

O

X

O

720p

O

1080i

O

1080p

O

X

4 ANT IN

To view television channels correctly, a signal must be received by the set from one of the following

sources:

- An outdoor aerial / A cable television network / A satellite network

5

COMMON INTERFACE Slot

- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.

- The pairing information containing a telephone number, CI CARD ID, Host ID and other information

will be displayed in about 2~3 minutes. If an error message is displayed, please contact your

service provider.

- When the channel information configuration has finished, the message "Updating Completed" is

displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD

may cause damage to it.

Insert the CI-Card in the direction marked on it.

6 WISELINK

- Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)

7 Headphones jack

- Headphone may be connected to the headphone output on your set. While the head phone is

connected, the sound from the built-in speakers will be disabled.

8

S-VIDEO or VIDEO / R-AUDIO-L

- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or

Camcorder.

- Connect RCA audio cables to "R - AUDIO - L" on your set and the other ends to corre

sponding audio out connectors on the A/V device.

9 PC IN (PC)/(AUDIO)

- Connect to the video and audio output jack on your PC.

0 DIGITAL AUDIO OUT (OPTICAL)

- Connect to a Digital Audio Component.

! SERVICE

- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV

viewing angle using your remote control.

The model LE70F96BD cannot be wall mounted. The EX-LINK jack on this model functions as a

service jack.

@

COMPONENT IN

- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of

your set and the other ends to corresponding component video out connectors on the DTV or DVD.

- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box

to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your

set.

- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled

Y, B-Y and R-Y or Y, Cb and Cr.

- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to

corresponding audio out connectors on the DTV or DVD.

- This LCD TV displays its optimum picture resolution in 1080p mode.

- This LCD TV displays its maximum picture resolution in 1080p mode.

# Kensington Lock (depending on the model)

- The Kensington lock (optional) is a device used to physically fix the system when used in a public

place.

- If you want to use a locking device, contact the dealer where you purchased the TV.

- The place of the Kensington Lock may be different depending on its model.

BN68-01313E-Eng-0817.indd 6 2007-08-17 ¿ÀÈÄ 4:26:10

English - 7

1 Selects a target device to be

controlled by the Samsung

remote control (TV, DVD,

STB, CABLE, VCR)

(Refer to pages 43~46)

2 Television Standby button

3 Number buttons for direct

channel access

4

One/Two-digit channel

selection

5 It display "Channel List"

on the screen.

6 Selects the TV and DTV

mode directly

7 VCR/DVD Functions

Rewind, Stop, Play/Pause,

Fast/Forward

8 Volume increase

Volume decrease

9 Temporary sound switch-off

0 Displays the main on-screen

menu

!

Returns to the previous

menu

# Electronic Program Guide

(EPG) display

$ Picture size selection

% Sound effect selection

^

Adjusts 5 separate devices

- TV, DVD, STB, CABLE, or

VCR

.

& [LE52F96BD] Press toPress to

backlight the VOL, CH, and

the active source button(TV,

DVD, CABLE, STB, VCR) on

the remote.

[LE70F96BD] Press to[LE70F96BD] Press to Press to

backlight the VOL, CH, MUTE

and LED screen.

* Available source selection

( Previous channel

) This function enables you to

view and play photo (JPEG)

and audio files (MP3) from an

external device.

a This remote can be used to

control recording on Samsung

recorders.

(Anynet+ function only)

b P : Next channel

P : Previous channel

c Exit the on-screen menu

d

Control the cursor in the

menu

e Use to see information on

the current broadcast

f Runs the Anynet view

functions and sets up Anynet+

devices.

g Colour buttons :

Press to add or delete

channels and to store

channels to the favorite

channel list in the “Channel

List” menu.

h Picture-In-Picture On / Off

i Digital subtitle display

j Picture effect selection

k Picture freeze

l

When your remote does not

work, change the batteries

and press the "RESET"

button for 2-3 seconds before

use.

m Display selected input source

and battery status

n

Make the remote control

works for TV, DVD, STB,

CATV, VCR (Refer to pages

43~46)

Teletext Functions

6 Exit from the teletext display

0 Teletext index

@

Alternately select Teletext,

Double, or Mix.

$ Teletext size selection

*

Teletext mode selection

(LIST/FLOF)

( Teletext sub page

b P

: Teletext next page

P : Teletext previous page

c Teletext cancel

e Teletext reveal

g Fastext topic selection

h Teletext hold

j Teletext store

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille points on the Power,

Channel, STOP, PLAY/PAUSE and Volume buttons.

Viewing the Remote Control

[LE70F96BD]

[LE52F96BD]

BN68-01313E-Eng-0817.indd 7 2007-08-17 ¿ÀÈÄ 4:26:12

English - 8

1. Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be

using the remote control for a long time. The remote control can be used

up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Installing Batteries in the Remote Control

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2.

Press the button on the front of the set.

You also can press the POWER button or the TV/DTV button on the remote control to turn

the TV on.

The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or

button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in

which the menus are to be displayed.

4. To switch your set off, press the POWER button again.

Your set can be placed in standby mode in order to reduce the power consumption. The standby

mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.

Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

2.

To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or

channel up/down ( / ) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday,

for example).

It is best to unplug the set from the mains and aerial.

Placing Your Television in Standby Mode

BN68-01313E-Eng-0817.indd 8 2007-08-17 ¿ÀÈÄ 4:26:13

English - 9

When the TV is initially powered on, several basic settings

proceed automatically and subsequently. The following

settings are available.

Any functions related to Digital TV (DVB) will only work in

countries or areas where DVB-T (MPEG2) digital terrestrial

signals are broadcasted. Please confirm with your local

dealer if you can receive DVB-T signals. Although this TV set

follows the DVB-T specification, maintaining compatibility with

the future coming DVB-T digital terrestrial broadcasts is not

guaranteed. Several functions may not be available in some

countries.

1.

Press the POWER button on the remote control.

The message "Start Plug & Play" is displayed with "OK" selected.

2. Select the appropriate language by pressing the

▲

or

▼

button.

Press the ENTER/OK button to confirm your choice.

3. Press the

◄

or

►

button to select “Shop” or “Home”, then the ENTER/OK button.

We recommend setting the TV to Home mode for the best picture in your home environment.

Shop mode is only intended for use in retail environments.

If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,

press the Volume button and then hold down the MENU button for five seconds on the side

panel of the TV.

4. The message "Check antenna input." is displayed with "OK" selected.

Press the ENTER/OK button.

Please check that the antenna cable is connected correctly.

5. Select the appropriate country by pressing the

▲

or

▼

button.

Press the ENTER/OK button to confirm your choice.

6.

The message “Some DTV functions may not be available. Digital Scan?” is displayed.

Press the ◄ or ► button to select “Yes” or “No”, then press the

ENTER/OK button.

This function is supported for all countries except for the following countries : France, Germany,

Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria

7.

The "Auto Store" menu is displayed with the "Start" selected. Press the

ENTER/OK

button.

The channel search will start and end automatically.

The DTV channel scan menu appears and the DTV channel is automatically updated.

If the DTV channel is updated, the Source in the source list of the Input menu is automatically

changed to DTV.

After all the available channels are stored, the "Clock Set" menu appears.

Press the ENTER/OK button at any time to interrupt the memorization process.

For detailed descriptions about DTV channel update, refer to page 28 of this manual.

After all the available digital channels are stored, the screen to select a time zone is displayed

depending on the country.

8. Press the ENTER/OK button.

Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the

◄

or

►

button.

Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the

▲

or

▼

button.

You can also set the “Month”, “Day”, “Year”, “Hour” and “Minute” by pressing the number

buttons on the remote control.

9.

Press the ENTER/OK button to confirm your setting. The message “Enjoy your viewing” is

displayed. When you have finished, press the

ENTER/OK button.

Even if the ENTER/OK button is not pressed, the message will automatically disappear after

several seconds.

Plug & Play



Language

: Select your language.



Country

: Select your country.



Auto Store

: Automatically scans for and stores channels available in the local area.



Clock Set

: Sets the current time for the TV clock.

Plug & Play

Start Plug & Play.

Enter

OK



Yes

:

First an ATV search is performed and then a DTV ch. auto search is performed.



No

:

Only an ATV search is performed.

BN68-01313E-Eng-0817.indd 9 2007-08-17 ¿ÀÈÄ 4:26:14

English - 10

If you want to reset this feature...

1.

Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Setup", then press the

ENTER/OK button.

2.

Press the ENTER/OK button again, to select "Plug & Play".

3. The message "Start Plug & Play" is displayed.

(Refer to page 9)

- Storing Channels Automatically

- Storing Channels Manually

TV

Analog Channel

Country : Belgium



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

You can scan for the frequency ranges available to you (and availability depends on your country).

Automatically allocated programme numbers may not correspond to actual or desired programme

numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Analog Channel", then press the ENTER/OK button.

2. Press the ENTER/OK button to select "Country".

3. Select the appropriate country by pressing the

▲

or

▼

button.

Press the ENTER/OK button to confirm your choice.

Even though you have changed the country setting in this menu, the country setting for DTV is not

changed. (Refer to page 28)

4. Press the

▲

or

▼

button to select "Auto Store", then press the ENTER/OK button.

5.

Press the ENTER/OK button.

The TV will begin memorizing all of the available channels.

Press the ENTER/OK button at any time to interrupt the memorization process and return to the

"Analog Channel" menu.

6.

After all the available channels are stored, the "Sort" menu appears. (refer to page 13)

Storing Channels Automatically

TV

Setup

Plug & Play 

Language : English 

Time 

Game Mode : Off 

Blue Screen : Off 

Melody : Off 

PC 

Home Theatre PC

: Off 

Light Effect :

In Watching TV





More

Move Enter Return

Plug & Play

Start Plug & Play.

Enter Return

OK

BN68-01313E-Eng-0817.indd 10 2007-08-17 ¿ÀÈÄ 4:26:15

English - 11

Storing Channels Manually

Not available in DTV or external input mode.

You can store television channels, including those received

via cable networks.

When storing channels manually, you can choose:

♦ Whether or not to store each of the channels found.

♦ The programme number of each stored channel which you wish

to identify.

1.

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Analog Channel", then

press the ENTER/OK button.

2.

Press the ▲ or ▼ button to select "Manual Store", then press

the ENTER/OK button.

3. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER/OK button.

4. When you are satisfied with your setting, press the

ENTER/OK button.

5.

Press the EXIT button to exit.

♦ Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

♦

Colour System: Auto/PAL/SECAM/NTSC4.43

− Press the ▲ or ▼ button to select the required colour standard.

♦ Sound System: BG/DK/I/L

− Press the ▲ or ▼ button to select the required sound standard.

♦

Channel (When you know the number of the channel to be stored)

− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

− Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

If there is abnormal sound or no sound, re-select the sound standard required.

♦

Search (When you do not know the channel numbers)

− Press the ▲ or ▼ button to start the search.

− The tuner scans the frequency range until the first channel or the channel that you selected is

received on the screen.

♦ Store (When you store the channel and associated programme number)

− Set to "OK" by pressing the ENTER/OK button.

Channel mode

− P (Programme mode): When completing tuning, the broadcasting stations in your area have

been assigned to position numbers from P00 to P99. You can select a channel by entering the

position number in this mode.

− C (Air channel mode): You can select a channel by entering the assigned number to each air

broadcasting station in this mode.

− S (Cable channel mode): You can select a channel by entering the assigned number for each

cable channel in this mode.

Analog Channel

Country : Belgium 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Move Enter Return

TV

Manual Store

Programme : P 2

Colour System : Auto 

Sound System : BG 

Channel : C 3

Search : 77 MHz

Store : ?

Move Enter Return

TV

BN68-01313E-Eng-0817.indd 11 2007-08-17 ¿ÀÈÄ 4:26:16

English - 12

Not available in DTV or external input mode.

Using the Channel Manager, you can conveniently lock or

add channels.

1.

Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Analog Channel", then

press the ENTER/OK button.

2.

Press the

▲

or

▼

button to select "Channel Manager",

then press the ENTER/OK button.

♦ Adding channels

Using the Channel List, you can add channels.

3. Select Channel List by pressing the ENTER/OK button.

4. Move to the ( ) field by pressing the ▲, ▼, ◄ or ►

button, select a channel to be added, and press the ENTER/

OK button to add the channel.

If you press the

ENTER/OK button again, the ( )

symbol next to the channel disappears and the channel

is not added.

"

" is active when "Child Lock" is selected to "On".

♦ Locking channels

This feature allows you to prevent unauthorized users, such

as children, from watching unsuitable programmes by muting

out video and audio.

5.

Press the

▲

or

▼

button to select "Child Lock", then press

the ENTER/OK button.

6.

Select "On" by pressing the ▲ or ▼ button, then press the

ENTER/OK button.

7.

Press the

▲

or

▼

button to select "Channel List",

then press the ENTER/OK button.

8. Move to the ( ) field by pressing the ▲, ▼, ◄ or ► button,

select a channel to be locked, and press the ENTER/OK

button.

If you press the

ENTER/OK button again, the ( ) symbol

next to the channel disappears and the channel lock is

canceled.

A blue screen is displayed when Child Lock is activated.

9.

Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels

which selected on " " to be active or inactive.

You can select these options by simply pressing the CH LIST

button on the remote control

➣

Adding / Locking Channels

TV

Channel Manager

Channel List 

Child Lock : Off 

P 1 C3

Channel List

Move Enter

Page Return

Add Lock

1 / 10

Prog.

0 C--

1 C3

2 BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

9 S7

Move Enter Return

Analog Channel

Country : Belgium 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Move Enter Return

TV

BN68-01313E-Eng-0817.indd 12 2007-08-17 ¿ÀÈÄ 4:26:18

English - 13

This operation allows you to change the programme

numbers of the stored channels.

This operation may be necessary after using the auto store.

Not available in DTV or external input mode.

1.

Press the MENU button to display the menu. Press the

▲

or

▼

button to select "Analog Channel", then press the ENTER/OK

button.

2. Press the

▲

or

▼

button to select "Sort", then press the

ENTER/OK button.

3. Select the channel number that you wish to change by press

ing the

▲

or

▼

button repeatedly. Press the ENTER/OK

button.

The selected channel number and name are moved to

right side.

4. Press the

▲

or

▼

button to move to the position in which

you would like to change and then press the ENTER/OK

button.

The selected channel is exchanged with the one

previously stored to the chosen number.

5. Repeat steps 3 to 4 for another channel to be sorted.

6.

Press the EXIT button to exit.

➣

Sorting the Stored Channels

Assigning Channels Names

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

Not available in DTV or external input mode.

1. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Analog Channel", then

press the ENTER/OK button.

2.

Press the

▲

or

▼

button to select "Name", then press the

ENTER/OK button.

3. If necessary, select the channel to be assigned to a new

name by pressing the

▲

or

▼

button. Press the ENTER/OK

button.

The selection bar is displayed around the name box.

4.

The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9)

Special characters (+, -, *, /, space)

5.

Repeat steps 3 to 4 for each channel to be assigned to a new name.

6.

Press the EXIT button to exit.

➣

To...

Select a letter, number or symbol

Move on the next letter

Move back the previous letter

Confirm the name

Then...

Press the ▲ or ▼ button

Press the ► button

Press the ◄ button

Press the

ENTER/OK button

Analog Channel

Country : Belgium 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

TV

Move Enter Return

Sort

Prog. Ch. Name



0 C--

1 C23 

2 C16

3 C3

4 S1



TV

Move Enter Return

Analog Channel

Country : Belgium 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Move Enter Return

TV

Name

Move Enter Return

Prog. Ch. Name



0 C-- -----

1 C23 -----

2 C16 -----

3 C3 -----

4 S1 -----



TV

BN68-01313E-Eng-0817.indd 13 2007-08-17 ¿ÀÈÄ 4:26:19

English - 14

If the TV is operating in a weak-signal area, the LNA function

can improve the reception (a low-noise preamplifier boosts

the incoming signal).

Not available in DTV or external input mode.

1.

Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Analog Channel", then

press the ENTER/OK button.

2.

Press the

▲

or

▼

button to select "LNA", then press the

ENTER/OK button.

3. Press the

▲

or

▼

button to select "On" or "Off".

Press the ENTER/OK button.

4. Press the EXIT button to exit.

➣

Use fine tuning to manually adjust a particular channel for

optimal reception.

Not available in DTV or external input mode.

1.

Use the number buttons to directly select the channel that

you want to fine tune.

2. Press the MENU button to display the menu.

Press the

▲

or

▼

button to select "Analog Channel", then

press the ENTER/OK button.

3. Press the

▲

or

▼

button to select "Fine Tune", then press

the ENTER/OK button.

4. Press the

◄

or

►

button to adjust the fine tuning.

Press the ENTER/OK button.

5.

Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with

an asterisk "*" on the right-hand side of the channel number

in the channel banner. And the channel number turns red.

To reset the fine-tuning, select "Reset" by pressing the

▲

or

▼

button and then press the ENTER/OK button.

➣

Fine Tuning Channel Reception

LNA (Low Noise Amplier)

Analog Channel

Country : Belgium 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

Fine Tune

P 1

0

Reset

Analog Channel

Country : Belgium 

Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

LNA : Off 

TV

Analog Channel

Country : Belgium

Auto Store

Manual Store

Channel Manager

Sort

Name

Fine Tune

LNA :

Off

On

TV

Move Enter Return

Adjust Save Return

Move Enter Return

BN68-01313E-Eng-0817.indd 14 2007-08-17 ¿ÀÈÄ 4:26:21

English - 15

You can select the type of picture which best corresponds to

your viewing requirements.

1.

Press the MENU button to display the menu.

Press the ENTER/OK button, to select "Picture".

2.

Press the ENTER/OK button again, to select "Mode".

3. Press the

▲

or

▼

button to select the desired picture effect.

Press the ENTER/OK button.

4. Press the EXIT button to exit.

♦ Dynamic: Selects the picture for high-definition in a bright

room.

♦ Standard: Selects the picture for optimum display in a

normal environment.

♦

Movie: Selects the picture for comfortable display in a

dark room.

The Picture mode must be adjusted separately for each input

source.

You can also press the P.MODE button on the remote control to

select one of the picture settings.

Changing the Picture Standard

Your set has several settings which allow you to control

picture quality.

1.

To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

2. Press the

▲

or

▼

button to select a particular item. Press

the ENTER/OK button.

3. Press the

◄

or

►

button to decrease or increase the value

of a particular item. Press the ENTER/OK button.

4. Press the EXIT button to exit.

Adjusting the Custom Picture

The adjusted values are stored according to the selected Picture mode.

In PC Mode, Only "Contrast" and "Brightness" can be adjusted.

"Tint" is only activated for NTSC broadcasting, DTV broadcasting, " Ext.", "AV", "S-Video",

"Component" and "HDMI" modes.

You can return to the factory defaults picture settings by selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 20)

Picture

Mode : Dynamic 

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G50 R50

Colour Tone : Cool1 

Detailed Settings 

Backlight : 10 

More

TV

Move Enter Return

Picture

Mode : Dynamic

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G50 R50

Colour Tone : Cool1

Detailed Settings

Backlight : 10

More

TV

Move Enter Return

Dynamic

Standard

Movie

Picture

Mode : Dynamic 

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G50 R50

Colour Tone : Cool1 

Detailed Settings 

Backlight : 10 

More

TV

Move Enter Return

♦ Contrast: Adjusts the lightness and darkness between objects and the background.

♦ Brightness: Adjusts the brightness of the whole screen.

♦ Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

♦ Colour: Adjusts the colours, making them lighter or darker.

♦ Tint:

Adjusts the colour of objects, making them more red or green for a more natural look.

BN68-01313E-Eng-0817.indd 15 2007-08-17 ¿ÀÈÄ 4:26:23

English - 16

Changing the Colour Tone

You can select the most comfortable colour tone to your

eyes.

1.

To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2. Press the ▲ or ▼ button to select "Colour Tone", then press

the ENTER/OK button.

3. Press the ▲ or ▼ button to select the desired colour tone

setting. Press the ENTER/OK button.

4. Press the EXIT button to exit

♦ Cool2: Makes the colour temperature bluer than "Cool1"

menu.

♦ Cool1: Makes whites bluish.

♦ Normal: Keeps whites white.

♦ Warm1: Makes whites reddish.

♦ Warm2: Makes the colour temperature redder than

"Warm1" menu.

The adjusted values are stored according to the selected Picture mode.

When the picture mode is set to "Dynamic" or "Standard", "Warm1" and "Warm2" cannot be selected.

➣

Picture

Mode : Dynamic 

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G50 R50

Colour Tone : Cool1 

Detailed Settings 

Backlight : 10 

More

TV

Move Enter Return

Picture

Mode : Dynamic

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G50 R50

Colour Tone : Cool1

Detailed Settings

Backlight : 10

More

TV

Move Enter Return

Cool 2

Cool 1

Normal

Warm 1

Warm 2

You can adjust the screen brightness by adjusting the LCD

backlight brightness. (0~10)

Activating Backlight

1. To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2. Press the ▲ or ▼ button to select “Backlight”, then press the

ENTER/OK button.

3. Press the ◄ or ► button to decrease or increase the value of

a particular item.

4. Press the ENTER/OK button.

Press the EXIT button to exit.

Picture

Mode : Dynamic 

Contrast 100

Brightness 45

Sharpness 75

Colour 55

Tint G50 R50

Colour Tone : Cool1 

Detailed Settings 

Backlight : 10 

More

TV

Move Enter Return

10

Backlight

Adjust Return

BN68-01313E-Eng-0817.indd 16 2007-08-17 ¿ÀÈÄ 4:26:24

English - 17

You can set detailed picture settings.

1. Press the MENU button to display the menu.

Press the ENTER/OK button, to select "Picture".

2. Press the ▲ or ▼ button to select "Detailed Settings", then

press the ENTER/OK button.

3. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER/OK button.

4. When you are satisfied with your setting, press the

ENTER/OK button.

5. Press the EXIT button to exit.

"Detailed settings" is available in "Standard" or "Movie" mode.

If "DNIe" is Off, the "Detailed Settings" cannot be selected

when the Picture mode is in "Standard" mode.

♦ Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust

the screen depth.

♦

Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

♦ Gamma: -3 ~ +3

You can adjust the Primary Color (Red, Green, Blue) Intensity.

Press the ◄ or ► button until you reach the optimal setting.

♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the colour temperature for more natural picture colours.

R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the

adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

♦

My Colour Control: Pink/Green/Blue/White/Reset

This setting can be adjusted to suit your personal preferences.

Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted colours will be reset to the factory defaults.

♦

Edge Enhancement: Off/On

You can emphasize object boundaries.

♦ Colour Space: Auto/Wide

You can set the colour reproduction space for the input signal to Auto or Wide.

♦ XVYCC: Off/On

Setting the xvYCC mode to On increases detail and colour space when watching

movies from an external device (ie. DVD player) connected to the HDMI or

Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.

Only available in "HDMI" and "Component" on "Movie" mode.

If xvYCC function is active, PIP cannot be selected.

Conguring Detailed Settings on the Picture

Picture

Mode : Movie 

Contrast 80

Brightness 45

Sharpness 30

Colour 53

Tint G50 R50

Colour Tone : Warm 2 

Detailed Settings 

Backlight : 5 

More

TV

Move Enter Return

Detailed Settings

Black Adjust : Off 

Dynamic Contrast

: Off 

Gamma : 0 

White Balance 

My Colour Control 

Edge Enhancement

: Off 

Colour Space

: Auto 

xvYCC

: Off 

Move Enter Return

TV

BN68-01313E-Eng-0817.indd 17 2007-08-17 ¿ÀÈÄ 4:26:25

English - 18

♦

Auto Wide: Automatically adjusts the picture size to the "16:9"

aspect ratio.

♦

16:9: Adjusts the picture size to 16:9 appropriate for DVDs or

wide broadcasting.

♦

Wide Zoom: Magnify the size of the picture more than 4:3.

♦

Zoom: Magnifies the 16:9 wide picture (in the vertical direction)

to fit the screen size.

♦

4:3: This is the default setting for a video movie or normal

broadcasting.

♦

Just Scan: Use the function to see the full image without any

cutoff when HDMI (720p/1080i/1080p) or Component

(720p/1080i/1080p) signals are input.

You can select the picture size which best corresponds to

your viewing requirements.

1.

Press the MENU button to display the menu.

Press the ENTER/OK button, to select "Picture".

2.

Press the

▲

or

▼

button to select "Size", then press the

ENTER/OK button.

3. Select the required option by pressing the

▲

or

▼

button.

Press the ENTER/OK button.

4. Press the EXIT button to exit.

"Auto Wide" function is available only in "TV", "DTV", "Ext.1",

"Ext.2", "AV", and "S-Video" mode.

In PC Mode, only "16:9" and "4:3" mode can be adjusted.

Depending on the input source, the picture size options may vary.

The items available may differ depending on the selected mode

Zoom : Select by pressing the ◄ or ► button.◄ or ► button.

Use the ▲ or ▼ button to move the picture up and down.▲ or ▼ button to move the picture up and down.

After selecting , use the ▲ or ▼ button to magnify or▲ or ▼ button to magnify or

reduce the picture size in the vertical direction.

Wide Zoom : Move the screen up/down using the▲ or ▼▲ or ▼ or ▼▼

button after selecting the

by pressing the

► oror ENTER/OK button.

➣

Changing the Picture Size

You can select these options

by simply pressing the P.SIZE

button on the remote control.

Size

Auto Wide

16 : 9

Wide Zoom

Zoom

4 : 3

Just Scan

Picture

Size : Auto Wide 

Screen Mode : 16 : 9 

Digital NR : Auto 

Active Colour : On 

DNle : On 

LED SmartLighting :

On 

Movie Plus :

On 

Reset : OK 

More

Move Enter Return

TV

When setting the picture size to Auto Wide in a 16:9 wide TV,

you can determine the picture size you want to see the 4:3

WSS (Wide Screen Service) image or nothing. Each individual

European country requires different picture size so this

function is intended for users to select it.

1.

Press the MENU button to display the menu.

Press the ENTER/OK button, to select “Picture”.

2.

Press the

▲

or

▼

button to select "Screen Mode", then press

the ENTER/OK button.

3. Select the required option by pressing the

▲

or

▼

button.

Press the ENTER/OK button.

♦ 16:9: Sets the picture to 16:9 wide mode.

♦ Wide Zoom: Magnify the size of the picture more than 4:3.

♦ Zoom: Magnify the size of the picture vertically on screen.

♦ 4:3: Sets the picture to 4:3 normal mode.

4. Press the EXIT button to exit.

This function is available in "Auto Wide" mode.

This function is not available in PC, Component or HDMI mode.

Selecting the Screen Mode

TV

Picture

Size : Auto Wide

Screen Mode : 16 : 9

Digital NR : Off

Active Colour : Off

DNle : Off

LED SmartLighting :

On

Movie Plus :

On

Reset : OK

More

16:9

Wide Zoom

Zoom

4:3

Move Enter Return

TV

BN68-01313E-Eng-0817.indd 18 2007-08-17 ¿ÀÈÄ 4:26:26

Страница загружается ...

Samsung LE52F96BD Руководство пользователя

Samsung LE52F96BD Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов