Yamaha MX61 Руководство пользователя

Owner’s Manual

MX49 MX61 MX88 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply

or adapter other than one described in the manual, on the

name plate, or specifically recommended by Yamaha.

WARNING: Do not place this product in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the min-

imum wire size for a 25’ cord (or less) is 18 AWG. NOTE: The

smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electri-

cian.

This product should be used only with the components sup-

plied or; a cart, rack, or stand that is recommended by

Yamaha. If a cart, etc., is used, please observe all safety mark-

ings and instructions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be cor-

rect at the time of printing. However, Yamaha reserves the

right to change or modify any of the specifications without

notice or obligation to update existing units.

This product, either alone or in combination with an amplifier

and headphones or speaker/s, may be capable of producing

sound levels that could cause permanent hearing loss. DO

NOT operate for long periods of time at a high volume level or

at a level that is uncomfortable. If you experience any hearing

loss or ringing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time

period before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be

dealer assembled or installed. Please make sure that benches

are stable and any optional fixtures (where applicable) are well

secured BEFORE using.

Benches supplied by Yamaha are designed for seating only.

No other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty, and

are therefore the owners responsibility. Please study this man-

ual carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe

and environmentally friendly. We sincerely believe that our

products and the production methods used to produce them,

meet these goals. In keeping with both the letter and the spirit

of the law, we want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life span

of this type of battery is approximately five years. When

replacement becomes necessary, contact a qualified service

representative to perform the replacement.

This product may also use “household” type batteries. Some of

these may be rechargeable. Make sure that the battery being

charged is a rechargeable type and that the charger is

intended for the battery being charged.

When installing batteries, never mix old batteries with new

ones, and never mix different types of batteries. Batteries

MUST be installed correctly. Mismatches or incorrect installa-

tion may result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep

all batteries away from children. Dispose of used batteries

promptly and as regulated by the laws in your area. Note:

Check with any retailer of household type batteries in your

area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end,

please observe all local, state, and federal regulations that

relate to the disposal of products that contain lead, batteries,

plastics, etc. If your dealer is unable to assist you, please con-

tact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, serial number, power requirements, etc., are

located on this plate. You should record the model number,

serial number, and the date of purchase in the spaces provided

below and retain this manual as a permanent record of your

purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

For Instrument

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party: Yamaha Corporation of America

Address: 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone: 714-522-9011

Type of Equipment: Music Synthesizer

Model Name: MX49, MX61, MX88

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference

that may cause undesired operation.

See user manual instructions if interference to radio reception is suspected.

(FCC DoC)

MX49 MX61 MX88 Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifi-

cations not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accesso-

ries and/or another product use only high quality shielded

cables. Cable/s supplied with this product MUST be used.

Follow all installation instructions. Failure to follow instruc-

tions could void your FCC authorization to use this product

in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these require-

ments provides a reasonable level of assurance that your

use of this product in a residential environment will not result

in harmful interference with other electronic devices. This

equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the opera-

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

tion of other electronic devices. Compliance with FCC regula-

tions does not guarantee that interference will not occur in all

installations. If this product is found to be the source of inter-

ference, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using one of

the following measures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distribute

this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America, Elec-

tronic Service Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

For AC adaptor and Instrument

MX49 MX61 MX88 Owner’s Manual

For AC adaptor

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

• This applies only to products distributed by Yamaha Canada Music Ltd.

• Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.

(can_b_01)

CAN ICES-3 (B)/NMB-3(B)

The above warning is located on the rear of the unit.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/

apparatus combination to

avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE.

MX49 MX61 MX88 Owner’s Manual

L'avertissement ci-dessus se trouve à l'arrière de l'instrument.

Explication des symboles graphiques

L'éclair avec une flèche à l'intérieur d'un

triangle équilatéral est destiné à attirer

l'attention de l'utilisateur sur la présence

d'une « tension dangereuse » non isolée à

l'intérieur de l'appareil, pouvant être

suffisamment élevée pour constituer un

risque d'électrocution.

Le point d'exclamation à l'intérieur d'un

triangle équilatéral est destiné à attirer

l'attention de l'utilisateur sur la présence

d'instructions importantes sur l'emploi ou la

maintenance (réparation) de l'appareil dans la

documentation fournie.

CONSIGNES DE SÉCURITÉ À LIRE ATTENTIVEMENT

1 Lisez les instructions ci-après.

2 Conservez ces instructions.

3 Tenez compte des avertissements.

4 Suivez toutes les instructions.

5 N'utilisez pas cet instrument dans un milieu humide.

6 Employez uniquement un chiffon sec pour nettoyer

l'instrument.

7 N'obstruez pas les ouvertures prévues pour la

ventilation. Installez l'instrument conformément aux

instructions du fabricant.

8 N'installez pas l'instrument près d'une source de

chaleur, notamment un radiateur, une bouche de

chaleur, un poêle ou autres (y compris les

amplificateurs).

9 Ne modifiez pas les caractéristiques de la fiche avec

mise à la terre polarisée. Une fiche polarisée est

dotée de deux broches (l'une est plus large que

l'autre). Une fiche avec mise à la terre comprend

deux broches, ainsi qu'une troisième qui relie

l'instrument à la terre. La broche la plus large (ou

troisième broche) permet de sécuriser l'installation

électrique. Si vous ne pouvez pas brancher le cordon

d'alimentation dans la prise d'alimentation,

demandez à un électricien de la remplacer.

10 Protégez le cordon d'alimentation. Cela permet

d'éviter de marcher dessus ou de le tordre au niveau

de la fiche, de la prise d'alimentation et des points de

contact sur l'instrument.

11 N'employez que les dispositifs/accessoires indiqués

par le fabricant.

12 Utilisez uniquement le chariot,

le socle, le trépied, le support

ou le plan indiqués par le

fabricant ou livrés avec

l'instrument. Si vous utilisez

un chariot, soyez prudent si

vous le déplacez avec

l'instrument posé dessus pour

éviter de le renverser.

13 Débranchez l'instrument en cas d'orage ou lorsque

vous ne l'utilisez pas pendant des périodes

prolongées.

14 Confiez toutes les réparations à des techniciens

qualifiés. Des réparations sont nécessaires lorsque

l'instrument est endommagé, notamment dans les

cas suivants : cordon d'alimentation ou fiche

défectueuse, liquides ou objets projetés sur

l'appareil, exposition aux intempéries ou à

l'humidité, fonctionnement anormal ou chute.

(UL60065_03)

ATTENTION

RISQUE D'ÉLECTROCUTION

NE PAS OUVRIR

ATTENTION : POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION,

NE PAS RETIRER LE CAPOT (OU LE DOS). NE CONTIENT

PAS DE PIÈCES NÉCESSITANT L'INTERVENTION

DE L'UTILISATEUR. POUR TOUTE INTERVENTION,

FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.

AVERTISSEMENT

N'UTILISEZ PAS L'INSTRUMENT SOUS LA PLUIE OU DANS UN ENVIRONNEMENT HUMIDE, FAUTE DE QUOI

VOUS RISQUEZ DE PROVOQUER UN INCENDIE OU DE VOUS ÉLECTROCUTER.

MX49 MX61 MX88 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

• This AC adaptor is designed for use with only Yamaha electronic

instruments. Do not use for any other purpose.

• Indoor use only. Do not use in any wet environments.

CAUTION

• When setting up, make sure that the AC outlet is easily accessible. If

some trouble or malfunction occurs, immediately turn off the power

switch of the instrument and disconnect the AC adaptor from the

outlet. When the AC adaptor is connected to the AC outlet, keep in

mind that electricity is flowing at the minimum level, even if the

power switch is turned off. When you are not using the instrument

for a long time, make sure to unplug the power cord from the wall

AC outlet.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the

cord, or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 40) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust

which may have accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the

instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, or place on it any containers (such as vases, bottles

or glasses) containing liquids which might spill into any openings.

If any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet.

Then have the instrument inspected by qualified Yamaha service

personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. Then

have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

For AC adaptor

For Instrument

Power supply/AC adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

DMI-5 1/2

MX49 MX61 MX88 Owner’s Manual

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality, or

possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when the instrument is not

to be used for extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected cables, to

prevent damage to the cables or injury to anyone who might trip

over them.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug from

the outlet. Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When you are not

using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Before connecting the instrument to other electronic components,

turn off the power for all components. Before turning the power on

or off for all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing the

instrument to set the desired listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps

on the panel. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons, switches

or connectors.

• Do not use the instrument/device or headphones for a long period of

time at a high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet

Power supply/AC adaptor

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

MX49 MX61 MX88 Mode d'emploi

PRÉCAUTIONS D'USAGE

PRIÈRE DE LIRE ATTENTIVEMENT AVANT DE PROCÉDER

À TOUTE MANIPULATION

Rangez ce manuel en lieu sûr et à portée de main afin de pouvoir le consulter ultérieurement.

AVERTISSEMENT

• L'adaptateur secteur est conçu pour être utilisé exclusivement avec

les instruments de musique électroniques Yamaha. Ne l'affectez pas

à un autre usage.

• Utilisation en intérieur uniquement. N'utilisez pas l'adaptateur dans

un environnement humide.

ATTENTION

• Lors de l'installation, assurez-vous que la prise secteur est facilement

accessible. En cas de problème ou de dysfonctionnement, désactivez

immédiatement l'interrupteur d'alimentation de l'instrument et retirez

l'adaptateur secteur de la prise de courant. Lorsque l'adaptateur

secteur est branché dans la prise secteur, gardez à l'esprit qu'une

faible dose d'électricité circule toujours dans l'instrument, même si

l'interrupteur d'alimentation est désactivé. Lorsque vous n'utilisez

pas l'instrument pendant une période prolongée, veillez à débrancher

le cordon d'alimentation de la prise murale.

AVERTISSEMENT

Veillez à toujours observer les précautions élémentaires énumérées ci-après pour éviter de graves blessures, voire la

mort, en raison d'une électrocution, d'un court-circuit, de dégâts, d'un incendie ou de tout autre risque. La liste de ces

précautions n'est pas exhaustive :

• Ne laissez pas le cordon d'alimentation à proximité de sources de

chaleur telles que les radiateurs ou les éléments chauffants.

Évitez également de le plier de façon excessive ou de l'endommager de

quelque manière que ce soit ou de placer dessus des objets lourds.

• Utilisez uniquement la tension requise pour l'instrument.

Celle-ci est indiquée sur la plaque du fabricant de l'instrument.

• Utilisez uniquement l'adaptateur spécifié (page 40). L'utilisation

d'un adaptateur inapproprié peut endommager l'instrument ou

entraîner une surchauffe.

• Vérifiez périodiquement l'état de la fiche électrique, dépoussiérez-la

et nettoyez-la.

• L'instrument ne contient aucune pièce nécessitant l'intervention

de l'utilisateur. N'ouvrez pas l'instrument et ne tentez pas d'en

démonter les éléments internes ou de les modifier de quelque façon

que ce soit. Si l'appareil présente des signes de dysfonctionnement,

mettez-le immédiatement hors tension et faites-le contrôler par un

technicien Yamaha qualifié.

• N'exposez pas l'instrument à la pluie et ne l'utilisez pas près d'une

source d'eau ou dans un milieu humide. Ne déposez pas dessus des

récipients (tels que des vases, des bouteilles ou des verres) contenant

des liquides qui risqueraient de s'infiltrer par les ouvertures. Si un

liquide, tel que de l'eau, pénètre à l'intérieur de l'instrument, mettez

immédiatement ce dernier hors tension et débranchez le cordon

d'alimentation de la prise secteur. Faites ensuite contrôler l'instrument

par un technicien Yamaha qualifié.

• N'essayez jamais de retirer ou d'insérer une fiche électrique avec les

mains mouillées.

• Ne déposez pas des objets présentant une flamme, tels que des

bougies, sur l'instrument. Ceux-ci pourraient se renverser et

provoquer un incendie.

• Si l'un des problèmes suivant survient, coupez immédiatement

l'alimentation et retirez la fiche électrique de la prise. Faites ensuite

contrôler l'appareil par un technicien Yamaha.

- Le cordon électrique s'effiloche ou est endommagé.

- L'instrument dégage une odeur inhabituelle ou de la fumée.

- Un objet est tombé à l'intérieur de l'instrument.

- Une brusque perte de son est intervenue durant l'utilisation

de l'instrument.

Adaptateur secteur

Instrument

Alimentation/Adaptateur secteur

Ne pas ouvrir

Prévention contre l'eau

Prévention contre les incendies

En cas d'anomalie

DMI-5 1/2

MX49 MX61 MX88 Mode d'emploi

ATTENTION

Observez toujours les précautions élémentaires reprises ci-dessous pour éviter tout risque de blessures corporelles,

pour vous-même ou votre entourage, ainsi que la détérioration de l'instrument ou de tout autre bien. La liste de ces

précautions n'est pas exhaustive :

• N'utilisez pas de connecteur multiple pour brancher l'instrument sur

une prise secteur. Cela risque d'affecter la qualité du son, voire de

provoquer la surchauffe de la prise.

• Veillez à toujours saisir la fiche, et non le cordon, pour débrancher

l'instrument de la prise d'alimentation. Si vous tirez sur le cordon,

vous risquez de l'endommager.

• Débranchez la fiche électrique de la prise secteur lorsque vous

n'utilisez pas l'instrument pendant un certain temps ou en

cas d'orage.

• Ne placez pas l'instrument dans une position instable afin d'éviter

qu'il ne tombe accidentellement.

• Avant de déplacer l'instrument, débranchez-en tous les câbles afin

d'éviter de les endommager ou de blesser quiconque risquerait de

trébucher dessus.

• Lors de la configuration de l'instrument, assurez-vous que la prise

secteur que vous utilisez est facilement accessible. En cas de

problème ou de dysfonctionnement, coupez immédiatement

l'alimentation et retirez la fiche de la prise. Même lorsque

l'interrupteur d'alimentation est en position d'arrêt, du courant

électrique de faible intensité continue de circuler dans l'instrument.

Si vous n'utilisez pas l'instrument pendant une période prolongée,

veillez à débrancher le cordon d'alimentation de la prise murale.

• Avant de raccorder l'instrument à d'autres appareils électroniques,

mettez ces derniers hors tension. Avant de mettre ces appareils sous

ou hors tension, réglez tous les niveaux de volume sur le

son minimal.

• Veillez également à régler tous les appareils sur le volume minimal

et à augmenter progressivement les commandes de volume tout en

jouant de l'instrument pour obtenir le niveau sonore souhaité.

• Ne glissez pas les doigts ou la main dans les fentes de l'instrument.

• Évitez d'insérer ou de laisser tomber des morceaux de papier,

des pièces métalliques ou tout autre objet dans les interstices du

panneau. Vous pourriez vous blesser ou provoquer des blessures

à votre entourage, endommager l'instrument ou un autre bien ou

causer des dysfonctionnements au niveau de l'instrument.

• Ne vous appuyez pas sur l'instrument et ne déposez pas d'objets

lourds dessus. Ne manipulez pas trop brutalement les touches,

les sélecteurs et les connecteurs.

• N'utilisez pas l'instrument ou le casque de manière prolongée à des

niveaux sonores trop élevés ou inconfortables qui risqueraient

d'entraîner des troubles définitifs de l'audition. Si vous constatez

une baisse d'acuité auditive ou que vous entendez des sifflements,

consultez un médecin.

Mettez toujours l'instrument hors tension lorsque vous ne l'utilisez pas.

Notez que même lorsque l'interrupteur [ ] (Veille/Marche) est en position de veille (l'écran est éteint), une faible quantité de courant électrique

circule toujours dans l'instrument.

Lorsque vous n'utilisez pas l'instrument pendant une période prolongée, veillez à débrancher le cordon d'alimentation de la prise murale.

Alimentation/Adaptateur secteur

Emplacement

Connexions

Précautions de manipulation

Yamaha ne peut être tenu responsable des détériorations causées par une mauvaise manipulation de l'instrument ou par des modifications

apportées par l'utilisateur, ni des données perdues ou détruites.

DMI-5 2/2

MX49 MX61 MX88 Owner’s Manual

The model number, serial number, power requirements, etc., may

be found on or near the name plate, which is at the bottom of the

unit. You should note this serial number in the space provided

below and retain this manual as a permanent record of your pur-

chase to aid identification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som

den ar ansluten till vägguttaget, även om själva apparaten har

stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,

sålænge netledningen sidder i en stikkontakt, som er tændt —

også selvom der er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita

koko laitetta verkosta.

(standby)

(weee_eu_en_02)

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic

products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance

with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects

on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste

disposal service or the point of sale where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for

the correct method of disposal.

MX49 MX61 MX88 Owner’s Manual

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices

below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the

instrument, TV, or radio may generate noise. When you use the instrument along with an application on your iPad, iPhone or iPod touch,

we recommend that you set “Airplane Mode” to “ON” on that device in order to avoid noise caused by communication.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car

during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids, or chemical-impregnated

wiping cloths.

 Saving data

• The data in the instrument’s Edit Buffer (memory location for edited data) is lost when you turn off the power to the instrument. Save the

data to the user memory (internal storage memory), or to USB flash drive/an external device such as a computer. However, the data

saved to the user memory may be lost due to some failure, an operation mistake, etc. Save your important data onto USB flash drive/an

external device such as a computer.

• To protect against data loss through USB flash drive damage, we recommend that you save your important data onto spare USB flash

drive or an external device such as a computer as backup data.

Infor mation

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except

for your personal use.

• This product incorporates and bundles contents in which Yamaha owns copyrights or with respect to which Yamaha has license to use

others’ copyrights. Due to copyright laws and other relevant laws, you are NOT allowed to distribute media in which these contents are

saved or recorded and remain virtually the same or very similar to those in the product.

* The contents described above include a computer program, Accompaniment Style data, MIDI data, WAVE data, voice recording data, a

score, score data, etc.

* You are allowed to distribute medium in which your performance or music production using these contents is recorded, and the

permission of Yamaha Corporation is not required in such cases.

 About functions/data bundled with the instrument

• This device is capable of using various types/formats of music data, and automatically optimizes that data to the proper format before

use. As a result, this device may not play back the data exactly as the producers or composers of the data originally intended.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from

those on your instrument.

• Windows is a registered trademark of Microsoft

Corporation in the United States and other countries.

• Apple, iTunes, Mac, Macintosh, iPhone, iPad and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Yamaha may from time to time update firmware of the product without notice for improvement in functions and usability. To take full

advantage of this instrument, we recommend that you upgrade your instrument to the latest version. The latest firmware can be

downloaded from the website below:

http://download.yamaha.com/

MX49 MX61 MX88 Owner’s Manual

Introduction

Thank you for purchasing the Yamaha MX49, MX61, or MX88 (hereafter referred to in this Owner’s Manual as this

instrument) Music Synthesizer. Please read this owner’s manual carefully before using the instrument in order to take full

advantage of its various features. When you have finished reading the manual keep it in a safe, accessible place, and

refer to it when you need to better understand an operation or function.

Accessories

• Owner’s Manual (this book)

• CUBASE AI DOWNLOAD INFORMATION

•AC adaptor*

*May not be included in your area. Please check with your Yamaha dealer.

MX49 MX61 MX88 Owner’s Manual

About the Manuals

This instrument has the following documents and instructional materials.

Included Documents

Owner’s Manual (this book)

Describes how to set up your instrument and how to perform basic operations. This is the document you should

read first when you start playing and using the instrument.

Online Materials (PDF)

Reference Manual

Describes the internal design of your instrument, how to use a connected computer, and all parameters that can

be adjusted and set. The manual includes the following contents.

Synthesizer Parameter Manual

This general, cross-product document explains parameters, effect types, effect parameters, and MIDI messages

that are used for all synthesizers. Read the Owner’s Manual and Reference Manual first and then use this

parameter manual if necessary to learn more about parameters and terms that relate to Yamaha synthesizers in

general.

Data List

Provides lists such as the Voice List, Performance List, Arpeggio Type List, Effect Type List, as well as reference

materials such as the MIDI Data table and MIDI Implementation Chart.

Basic Structure

• Structure of the MX49, MX61, or MX88

• Controller block

• Tone Generator block

• Effect block

• Arpeggio block

• Song/ Pattern playing block

• Internal memory

• MIDI/Audio signal flow

Using a Connected Computer

• Connecting to a computer

• Creating a Song with a computer

Using iOS Applications

Reference

• Performance

• Song/Pattern settings

•File

• Utility

• Remote mode

How to use the PDF manuals

The Reference Manual, the Synthesizer Parameter Manual, and the Data List are provided as data documents in

PDF format. The PDF manuals listed above can be obtained from the Yamaha Downloads web page. To do so, go to

the web page using the following URL, enter “MX49,” “MX61,” or “MX88” into the “Model Name” field, and then click

“Search.”

Yamaha Downloads:

http://download.yamaha.com/

These PDF files can be viewed and read on a computer. When using Adobe

Reader

to view a PDF file, you can

search for specific words, print a specific page or link to open a desired section in the manual. The term search and

link functions are especially convenient methods of navigating through a PDF file, and we recommend that you use

them. The latest version of Adobe Reader can be downloaded from the following URL.

http://www.adobe.com/products/reader/

MX49 MX61 MX88 Owner’s Manual

Main Features

 Dynamic, MOTIF-based Sounds

This instrument contains a wide range of dynamic and authentic waveforms derived directly from the world famous

Yamaha MOTIF (including the realistic instrument sounds of acoustic piano, electric piano, synthesizer, drums, and many

others). These give you exceptionally high-quality sound for playing and recording in various musical genres. Moreover,

you can easily play back phrases of each instrument—even complex phrases impossible to play live—by using the

Arpeggio function. The instrument also features an extensive effect system—including VCM (Virtual Circuitry Modeling)

Effects, REV-X (high grade Reverb) Effects, and Master EQ. In a wide variety of ways, this instrument truly enhances and

inspires your music performance and creation.

 Easy-to-use user interface

This instrument has been designed for easy playability and simple, intuitive operation. For example, the Category

buttons let you quickly select a desired Voice from easy-to-understand groups, based on the general instrument type or

sound characteristics. The useful and popular Layer function (playing two Voices together) and Split function (playing

two separate Voices with your left and right hands) can also be set instantly. What’s more, four Knobs are available on the

panel—letting you control twelve aspects of the sound, and tweak them in real time as you play.

 Highly portable, with easy-to-carry design

This instrument can go virtually wherever you go, thanks to its light weight and compact size. The MX49 is designed slim

and trim, so that it easily fits on your desk or in front of your computer. The MX61 has a indented handle at the bottom,

allowing you to easily carry it with one hand.

 Jam along with the Rhythm Patterns and Songs

This instrument features a wealth of dynamic Rhythm Patterns in wide variety of musical genres. You can play the

keyboard along with Rhythm Pattern playback—a truly inspiring way to perform! The instrument also conveniently lets

you play back MIDI and Audio data contained in USB flash memory—letting you easily use Song data created on

computer during live performance, without needing a computer! Plus, an [AUX IN] jack allows you to connect a portable

music player, so that you can play the keyboard along with your favorite songs.

 Full music production capabilities—with just this instrument!

Both MIDI and audio data can be transferred to and from a computer via USB—without the need for a separate audio

interface or a MIDI interface. You can record and play MIDI data, record digital audio data from this instrument directly,

and monitor the DAW sound from the OUTPUT [L/MONO] jack/ [PHONES] jack.

 Integration with Cubase

This instrument is specially designed to work seamlessly with Cubase, Steinberg’s full-featured DAW software—giving

you a comprehensive, all-in-one music production system, in which hardware and software are fully integrated.

 USB audio and MIDI Class-Compliant for easy connection to iOS applications

This instrument can connect to iOS by using USB Audio/MIDI Class Compliant. You can use Stereo Audio In/Out and

MIDI In/Out with iPhone and iPad through Apple’s Lightning - USB Camera Adapter. Combining the

instrument with an iOS

audio application, you can get a mobile audio recording solution.

MX49 MX61 MX88 Owner’s Manual

PRECAUTIONS ................................................... S6

Introduction .............................................................2

Accessories.............................................................2

About the Manuals ..................................................3

Included Documents.................................................. 3

Online Materials (PDF)............................................... 3

Main Features .........................................................4

Controls and Functions 6

Front Panel .............................................................6

Rear Panel ..............................................................8

Setting Up 9

Power supply...........................................................9

Connecting speakers or headphones .....................9

Powering up the system..........................................9

Auto Power Off function ........................................10

Adjusting the volume and the brightness of the

display ...................................................................10

Playing the Demo Songs.......................................10

Resetting User Memory to the initial factory

settings..................................................................11

Basic Operation and Displays 12

Moving the cursor..................................................12

Changing (editing) parameter values....................12

Selecting an item from a List.................................12

Selecting a page ...................................................13

Note settings .........................................................13

Naming (inputting characters) ...............................13

Leaving the current display ...................................13

Quick Guide 14

Playing the Voices.................................................14

Selecting a Voice for Part 1...................................... 14

Selecting a Voice for Part 2...................................... 15

Combining Voices (Layer) ....................................... 15

Playing separate Voices with your left and right hands

(Split)........................................................................ 16

Changing the tonal qualities of the Voice with the

controllers..............................................................17

Controllers on the front panel................................... 17

External Controllers ................................................. 18

Using the Arpeggio function ................................. 18

Playing back the Arpeggio ...................................... 18

Changing the Arpeggio tempo ................................ 19

Changing the Arpeggio type ................................... 19

Keyboard Octave/Transpose settings .................. 20

Octave...................................................................... 20

Transpose ................................................................ 20

Storing the edited settings.................................... 20

Playing the Performances .................................... 20

Playing back Rhythm Patterns ............................. 21

Playing the keyboard with the Rhythm Pattern ........ 21

Changing the Rhythm Pattern type and sound........ 22

Changing the tempo for the Rhythm Pattern ........... 22

Playing the keyboard along with Songs ............... 23

Songs compatible with this instrument .................... 23

Playing back MIDI data of the USB flash memory... 23

Playing back audio data of the USB flash memory 24

Playing back song data of a portable music player 25

Creating an original Performance......................... 25

Selecting the Reverb/Chorus type

(Common Edit/Part Edit) .......................................... 25

Changing the Insertion Effect of the Voice

(Voice Edit)............................................................... 27

Changing the Controller Set for the Voice

(Voice Edit)............................................................... 28

Storing a Voice (Voice Store) ................................... 29

Storing a Performance (Performance Store)............ 29

Changing Voices smoothly while performing ....... 30

Making Global System Settings (Utility settings).. 31

Changing the Master Tune setting........................... 31

Adjusting the brightness of the display

(LCD Contrast) ......................................................... 31

Saving/loading files on USB flash memory

(File settings)........................................................ 31

Formatting the USB flash memory ........................... 31

Saving settings to USB flash memory...................... 32

Loading the settings from a USB flash memory ...... 32

Connecting an external MIDI instrument.............. 33

Controlling the instrument from an external MIDI

keyboard or synthesizer........................................... 33

Controlling an external MIDI keyboard or synthesizer

from the instrument .................................................. 34

Appendix 35

Shift Function List................................................. 35

Display Messages ................................................ 35

Troubleshooting.................................................... 37

Specifications ....................................................... 40

Index .................................................................... 41

Contents

MX49 MX61 MX88 Owner’s Manual

Front Panel

[MASTER VOLUME] knob (page 10)

Adjusts the volume of the overall sound.

Pitch Bend Wheel (page 17)

Bends the pitch of the notes up or down while playing

the keyboard.

Modulation Wheel (page 17)

Controls vibrato applied to the sound.

Knobs [A] – [D] (page 17)

These four highly versatile knobs let you adjust various

aspects or parameters of Parts 1 and 2.

[KNOB FUNCTION] button (page 17)

Changes the functions assigned to Knobs [A] – [D].

[PART 1-2 LINK] button (page 17)

Determines the sound which is applied to the Knob

effects.

[DAW REMOTE] button (See Reference

Manual)

Turning on this button enters the Remote mode. The

Remote mode lets you control DAW software on your

computer from the panel controls of the instrument.

TRANSPOSE [-]/[+] buttons (page 20)

Use these buttons to raise or lower the pitch of the notes

in semitone steps.

OCTAVE [-]/[+] buttons (page 20)

Use these buttons to change the note range of the

keyboard.

Transport buttons (pages 21 and 23)

[] (Stop) button

Press to stop playback of Rhythm Pattern or Song data.

[ / ] (Play/Pause) button

Press to alternately start/pause playback of a Rhythm

Pattern or Song data from the current point.

[FILE] button (page 31)

Calls up the File display from which you can transfer files

between this instrument and USB flash memory.

[UTILITY] button (page 31)

Calls up the Utility display from which you can set

parameters that apply to the entire system of this

instrument.

[EDIT] button

Calls up the display from which you can edit a

Performance (page 20). Also, pressing this button while

editing lets you switch between the just-edited sound

and its original, unedited condition, allowing you to hear

how your edits affect the sound (Compare function).

[JOB] button (Refer to the Reference Manual)

Calls up the Performance Job or Utility Job display.

[STORE] button

Stores the Performance/Voice/Utility settings.

Controls and Functions

C2 D2 E2 F2 G2 A2 B2 C3 C4

(The illustration is of the MX49; however, the controls and terminals of the MX61 and MX88 are the same.)

MX49 MX61 MX88 Owner’s Manual

Controls and Functions

[PERFORMANCE NUMBER] display

Indicates the number of the selected Performance.

[SELECT] button (page 20)

Calls up the display from which you can select a

Performance.

LCD (Liquid Crystal Display) (page 10)

The backlit LCD indicates the parameters and values

related to the currently selected operation or function.

[DATA] dial (page 12)

Changes the selected value in the display.

[SHIFT] button (page 35)

Pressing this button along with another button enables

you to execute various alternate commands of the

respective buttons.

[INC/YES]/[DEC/NO] buttons (page 12)

For increasing/decreasing the value of the currently

selected parameter.

Cursor buttons (page 12)

These move the “cursor” around the display, and scroll

through the pages of the edited display.

[EXIT] button

The menus and displays of the instrument are organized

according to a hierarchical structure. Press this button to

exit from the current display and return to the previous

level in the hierarchy.

[ENTER] button

Use this button to select the display to be edited, to

define the value, and to execute a Job or a Store

operation.

[LAYER] button (page 15), [SPLIT] button

(page 16)

These buttons respectively layer different Voices of Parts

1 and 2, and split the keyboard into left and right parts.

[ARP] button (page 18)

Determines whether the Arpeggio function is applied to

the entire Performance or not.

[RHYTHM PATTERN] button (page 21)

Calls up the display from which you can select a Rhythm

Pattern.

[EXT. SONG] (External Song) button (page 23)

Calls up the display from which you can select Song

data of the USB flash memory connected to the USB [TO

DEVICE] terminal.

[TEMPO] button (pages 19, 22 and 23)

Calls up the display from which you can set the tempo

for the Arpeggio/ Rhythm Pattern/ Song.

Voice Category button (page 14)

Selects a Voice category for Part 1/Part2.

[PART SELECT] button

Calls up the display from which you can select a Part

from Parts 1 – 16 and play it.

C5 C6

MX49 MX61 MX88 Owner’s Manual

Controls and Functions

Rear Panel

DC IN jack (page 9)

Connect the supplied power adaptor to this connector.

(Standby/On) switch (page 9)

Press to turn the power On ( ) or set to Standby ( ).

MIDI [IN]/[OUT] terminals (page 33)

MIDI [IN] is for receiving control or performance data

from another MIDI device.

MIDI [OUT] is for transmitting all control, performance

and playback data from this instrument to another MIDI

device.

USB terminals

There are two different types of USB terminals, and the

rear panel of the instrument features both.

The USB [TO HOST] terminal is used to connect this

instrument to the computer via a USB cable and allows

you to transfer MIDI data and audio data between the

devices. For information about the Port handled by the

instrument, refer to the “Reference Manual” PDF

document.

The USB [TO DEVICE] terminal is used to connect this

instrument to a USB flash memory via a USB cable. For

details, see pages 23 and 31.

[SUSTAIN] jack (page 18)

For connection of an optional FC3A, FC4A, or FC5

Footswitch. When connecting an FC4A or FC5, this also

enables footswitch control over various other functions.

[FOOT CONTROLLER] jack (page 18)

For connection of an optional FC7 Foot controller. This

jack lets you continuously control one of various different

assignable functions—including volume, tone, pitch, or

other aspects of the sound.

[AUX IN] (Auxiliary Input) jack (page 25)

The Auxiliary Input stereo mini-jack is used to input audio

from an external audio device. For example, you can use

this jack to connect a portable music player and play

along with your favorite music.

NOTE

Use the external device’s volume control to adjust the

desired level balance with this instrument.

OUTPUT [L/MONO]/[R] jacks

Line level audio signals are output via these phone jacks.

For monophonic output, use only the [L/MONO] jack.

[PHONES] (Headphone) jack

This standard stereo phones jack is for connection to a

set of stereo headphones. The audio output is identical

to that of the OUTPUT [L/MONO]/[R] jack.

MX49, MX61

MX88

MX49 MX61 MX88 Owner’s Manual

Power supply

Make connections for the supplied power adaptor

(page 40) in the following order. Before you connect the

power adaptor, make sure that the power of this

instrument is set to Standby status ().

1 Wrap the DC output cable of the power

adaptor around the cable clip (as shown

below), then connect the plug of the adaptor

to the DC IN jack on the rear panel.

NOTE Use of the cable clip prevents accidental unplugging of the

cable during operation. Make sure to avoid tightening the

cord more than necessary or pulling on the cord strongly

while it is wrapped around the cable clip to prevent wear on

the cord or possible breakage of the clip.

2 Connect the other end of the power adaptor

to an AC outlet.

NOTE Follow this procedure in reverse order when disconnecting

the power adaptor.

WARNING

• Use only the specified adaptor (page 40). The use of other

adaptors may result in irreparable damage to both the

adaptor and the instrument.

• When using the AC adaptor with

a removable plug, make sure to

keep the plug attached to the AC

adaptor. Using the plug alone

can cause electric shock or fire.

• Never touch the metallic section

when attaching the plug. To avoid

electric shock, short circuit or

damage, also be careful that

there is no dust between the AC

adaptor and plug.

CAUTION

Even when the power of this instrument is in the Standby

status, electricity is still flowing to the instrument at the

minimum level. When you are not using the instrument for a

long time, make sure you unplug the power adaptor from the

wall AC outlet.

Connecting speakers or

headphones

Since this instrument has no built-in speakers, you will

need to monitor the sound of the instrument by using

external equipment. Connect a set of headphones,

powered speakers, or other playback equipment as

illustrated below. When making connections, be sure that

your cables have the appropriate ratings.

NOTICE

Before connecting this instrument to external devices, turn

off the power to all the devices.

Powering up the system

Make sure the volume settings of this instrument and

external devices such as powered speakers are turned

down to the minimum before turning the power on. When

connecting this instrument to the powered speakers, turn

on the power switch of each device in the following order.

When turning the power on:

First, turn the power of the instrument on with the

(Standby/On) switch, then turn the power of the

connected powered speakers on.

When turning the power off:

First, turn the power of the connected powered speakers

off, then turn the power of the instrument off with the

(Standby/On) switch.

Setting Up

MX49, MX61 MX88

Power adaptor

AC outlet

Plug

Slide the plug

as indicated

The shape of the plug differs

depending on your area.

Powered speaker

(Left)

Powered speaker

(Right)

OUTPUT [L/MONO] OUTPUT [R]

Headphones

[PHONES]

Standard mono phone

plugs

Standard stereo phone plug

MX49, MX61, or MX88

Standby/On switch DC IN

MX49, MX61, or MX88

MX49 MX61 MX88 Owner’s Manual

Setting Up

Auto Power Off function

To prevent unnecessary power consumption, this

instrument features an Auto Power Off function that

automatically turns the power off if the instrument is not

operated for a specified period of time. In the default

settings, the power will be turned off if this instrument is

not operated for 30 minutes.

If you wish to disable the Auto Power Off function, turn the

power on while holding down the lowest key on the

keyboard. An “Auto power off disabled” message

appears briefly and Auto Power Off is disabled. The

setting is retained even if the power is turned off.

The amount of time that elapses before the power is

automatically turned off can be set by the following

operation.

[UTILITY]  Select “01:General” with Cursor [ ] button

 [ENTER]  Select “AutoOff” with Cursor [ ] button,

then change the value with [DATA] dial  [STORE]

NOTICE

• Depending on the instrument status (for example, the

settings have been modified but not yet stored), the power

may not turn off automatically, even after the elapse of the

specified period of time. Always turn off the power

manually when the instrument is not in use.

• When the instrument is not operated for a specified period

of time while connected to an external device such as an

amplifier, speaker or computer, make sure to follow the

instructions in the Owner’s Manual to turn off the power to

the instrument and the connected devices, in order to

protect the devices from damage. If you do not want the

power to turn off automatically when a device is

connected, disable Auto Power Off.

• When Auto Power Off is set to “off,” the value will be

retained even if the backup data saved on another device

is loaded to the instrument. When Auto Power Off is set to

something other than “off,” the value will be overwritten

with loaded data.

• Keep in mind that the amount of time that elapses before

the power automatically turns off is reset to 30 minutes if

you execute the Factory Set function (page 11).

NOTE • The setting time is approximate.

• To turn the power on after Auto Power Off has been exe-

cuted, press the Standby/On switch once to set it to

Standby, and then press it again to set to On.

Adjusting the volume and

the brightness of the

display

Adjust the volume levels of this instrument and the

connected amplifier/speaker system.

NOTE When connecting to a set of powered speakers or PA

equipment, set the Master Volume to about 70%, then raise

the volume of the powered speakers or PA equipment to the

appropriate level.

CAUTION

Do not listen with the headphones at high volume for long

periods of time. Doing so may cause hearing loss.

If the display is not easily visible, while holding down

[UTILITY], press [INC/YES]/[DEC/NO] to adjust for

optimum visibility.

Playing the Demo Songs

The instrument features a variety of Demo Songs,

showcasing its dynamic sound and sophisticated

functions.

Here’s how to play them back.

1 Press [FILE] and [UTILITY] at the same time.

The DEMO display is called up.

2 Rotate the [DATA] dial to select a Demo Song.

3 Press [F/ K] (Play/Pause) to play back the

Demo Song.

The Demo Song currently shown on the display starts.

NOTE To adjust the volume level of the Demo Songs, use the

[MASTER VOLUME] Knob.

4 Press [J] (Stop) to stop the Demo Song.

5 In order to leave the DEMO display, press

[EXIT].

Adjust the volume

with the [MASTER

VOLUME] knob.

Adjust the display contrast.

MX49, MX61, or MX88

Страница загружается...

Yamaha MX61, MX49, MX88, MX88 88-Key Synthesizer, MX88BK Руководство пользователя

Похожие модели бренда