Yamaha MX49 Инструкция по применению

Owner’s Manual

MX49/MX61 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply

or adapter other than one described in the manual, on the

name plate, or specifically recommended by Yamaha.

WARNING: Do not place this product in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the min-

imum wire size for a 25’ cord (or less ) is 18 AWG. NOTE: The

smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electri-

cian.

This product should be used only with the components sup-

plied or; a cart, rack, or stand that is recommended by

Yamaha. If a cart, etc., is used, please observe all safety mark-

ings and instructions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be cor-

rect at the time of printing. However, Yamaha reserves the

right to change or modify any of the specifications without

notice or obligation to update existing units.

This product, either alone or in combination with an amplifier

and headphones or speaker/s, may be capable of producing

sound levels that could cause permanent hearing loss. DO

NOT operate for long periods of time at a high volume level or

at a level that is uncomfortable. If you experience any hearing

loss or ringing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time

period before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be

dealer assembled or installed. Please make sure that benches

are stable and any optional fixtures (where applicable) are well

secured BEFORE using.

Benches supplied by Yamaha are designed for seating only.

No other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty, and

are therefore the owners responsibility. Please study this man-

ual carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe

and environmentally friendly. We sincerely believe that our

products and the production methods used to produce them,

meet these goals. In keeping with both the letter and the spirit

of the law, we want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life span

of this type of battery is approximately five years. When

replacement becomes necessary, contact a qualified service

representative to perform the replacement.

This product may also use “household” type batteries. Some of

these may be rechargeable. Make sure that the battery being

charged is a rechargeable type and that the charger is

intended for the battery being charged.

When installing batteries, never mix old batteries with new

ones, and never mix different types of batteries. Batteries

MUST be installed correctly. Mismatches or incorrect installa-

tion may result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep

all batteries away from children. Dispose of used batteries

promptly and as regulated by the laws in your area. Note:

Check with any retailer of household type batteries in your

area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for

some reason its useful life is considered to be at an end,

please observe all local, state, and federal regulations that

relate to the disposal of products that contain lead, batteries,

plastics, etc. If your dealer is unable to assist you, please con-

tact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, serial number, power requirements, etc., are

located on this plate. You should record the model number,

serial number, and the date of purchase in the spaces provided

below and retain this manual as a permanent record of your

purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

MX49/MX61 Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifi-

cations not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accesso-

ries and/or another product use only high quality shielded

cables. Cable/s supplied with this product MUST be used.

Follow all installation instructions. Failure to follow instruc-

tions could void your FCC authorization to use this product

in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these require-

ments provides a reasonable level of assurance that your

use of this product in a residential environment will not result

in harmful interference with other electronic devices. This

equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the opera-

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

tion of other electronic devices. Compliance with FCC regula-

tions does not guarantee that interference will not occur in all

installations. If this product is found to be the source of inter-

ference, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using one of

the following measures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distribute

this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America, Elec-

tronic Service Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY

PROCEDURE)

Responsible Party: Yamaha Corporation of America

Address: 6600 Orangethorpe Ave., Buena Park,

Calif. 90620

Telephone: 714-522-9011

Type of Equipment: Music Synthesizer

Model Name: MX49/MX61

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received includ-

ing interference that may cause undesired operation.

See user manual instructions if interference to radio recep-

tion is suspected.

(FCC DoC)

The model number, serial number, power requirements, etc.,

may be found on or near the name plate, which is at the bottom

of the unit. You should note this serial number in the space pro-

vided below and retain this manual as a permanent record of

your purchase to aid identification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge

som den ar ansluten till vägguttaget, även om själva apparaten

har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE

afbrudt, sålænge netledningen sidder i en stikkontakt, som er

tændt — også selvom der er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita

koko laitetta verkosta.

(standby)

(weee_eu_en_01)

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic

products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in

accordance with your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative

effects on human health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your

waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer

and ask for the correct method of disposal.

MX49/MX61 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or

radiators. Also, do not excessively bend or otherwise damage the

cord, or place heavy objects on it.

• Only use the voltage specified as correct for the instrument. The

required voltage is printed on the name plate of the instrument.

• Use the specified adaptor (page 44) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust

which may have accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the

instrument or attempt to disassemble or modify the internal

components in any way. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualified

Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or

wet conditions, place on it any containers (such as vases, bottles or

glasses) containing liquids which might spill into any openings. If

any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet.

Then have the instrument inspected by qualified Yamaha service

personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet. Then

have the device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality, or

possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an outlet,

always hold the plug itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when the instrument is not

to be used for extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected cables, to

prevent damage to the cables or injury to anyone who might trip

over them.

• When setting up the product, make sure that the AC outlet you are

using is easily accessible. If some trouble or malfunction occurs,

immediately turn off the power switch and disconnect the plug from

the outlet. Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When you are not

using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Before connecting the instrument to other electronic components,

turn off the power for all components. Before turning the power on

or off for all components, set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing the

instrument to set the desired listening level.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor

Location

Connections

DMI-5 1/2

MX49/MX61 Owner’s Manual

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps

on the panel. This could cause physical injury to you or others,

damage to the instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons, switches

or connectors.

• Do not use the instrument/device or headphones for a long period of

time at a high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display

is off), electricity is still flowing to the instrument at the minimum

level.

When you are not using the instrument for a long time, make sure you

unplug the power cord from the wall AC outlet

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices

below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the

instrument, TV, or radio may generate noise. When using the iPad/iPhone/iPod Touch with this instrument, you should enable the Airplane

mode of the iPad/iPhone/iPod Touch to avoid possible wireless communication noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car

during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping

cloths.

 Saving data

• The data in the instrument’s Edit Buffer (memory location for edited data) is lost when the instrument is turned off. Save your important

data to the user memory (internal storage memory)/a USB flash memory/external device such as a computer. Keep in mind that saved

data may be lost due to malfunction or incorrect operation.

• To protect against data loss through media damage, we recommend that you save your important data onto two USB flash memories or

external media.

Infor mation

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except

for your personal use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it

has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files,

WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not

permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL

COPIES.

 About functions/data bundled with the instrument

• This device is capable of using various types/formats of music data by optimizing them to the proper format music data for use with the

device in advance. As a result, this device may not play them back precisely as their producers or composers originally intended.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from

those on your instrument.

• Windows is a registered trademark of Microsoft

Corporation in the United States and other countries.

• Apple, Mac, iPhone, iPad, and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Handling caution

Yamaha cannot be held responsible for damage caused by

improper use or modifications to the instrument, or data that is lost

or destroyed.

About the latest Firmware Version

Yamaha may from time to time update firmware of the product and the other associated software without notice for improvement. We

recommend that you check our web site for the latest releases and upgrade your firmware of the MX49/MX61 or the associated software.

http://download.yamaha.com/

Note that the explanations in this Owner’s Manual apply to the version of firmware when this Owner’s Manual was produced. For details

about additional functions included in later releases, refer to the above website.

DMI-5 2/2

MX49/MX61 Owner’s Manual

Introduction

Thank you for purchasing the Yamaha MX49/MX61 Music Synthesizer. Please read this owner’s manual carefully before

using the instrument in order to take full advantage of its various features. When you have finished reading the manual

keep it in a safe, accessible place, and refer to it when you need to better understand an operation or function.

Accessories

• Owner’s Manual (this book)

• Online Manual CD-ROM x 1 (Reference Manual, Synthesizer Parameter Manual, and Data List)

• DVD-ROM x 1 (containing DAW software)

•AC adaptor*

*May not be included in your area. Please check with your Yamaha dealer.

About the Accessory Disk

SPECIAL NOTICE

• The software included in the accessory disk and the copyrights thereof are under exclusive ownership by Steinberg Media

Technologies GmbH.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the

written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held

responsible for the results of the use of this manual and the software.

• This disk is NOT for audio/visual purposes. Do not attempt to play the disk on an audio/visual CD/DVD player. Doing so may

result in irreparable damage to your player.

• Note that Yamaha does not offer technical support for the DAW software in the accessory disk.

About the DAW software in the accessory disk

The accessory disk contains DAW software both for Windows and Mac.

NOTE

• Make sure to install DAW software under the “Administrator” account.

• Insert the Accessory Disk into the disk drive, then execute the “Start_Center” file to install the DAW software.

• In order to have continuous use of the DAW software in the accessory disk, including support and other benefits, you will

need to register the software and activate your software license by starting the software while the computer is connected to

the Internet. Click the “Register Now” button shown when the software is started, then follow the onscreen instructions. If you

do not register the software, you will be unable to use it after a limited period of time expires.

For information about the minimum system requirements and latest information on the software in the disk, check the web

site below.

http://www.steinberg.net

About software support

Support for the DAW software in the accessory disk is provided by Steinberg on its website at the following address.

http://www.steinberg.net

You can visit the Steinberg site also via the Help menu of the included DAW software. (The Help menu also includes the

PDF manual and other information on the software.)

MX49/MX61 Owner’s Manual

Using the MX49/MX61 Manual

Your MX49/MX61 synthesizer comes with four different reference guides—the Owner’s Manual (this book), the Reference

Manual, the Synthesizer Parameter Manual, and the Data List. While the Owner’s Manual is packaged together with the

synthesizer as a hardcopy booklet, the Reference Manual, Synthesizer Parameter Manual, and Data List are provided as

PDF documents on the bundled CD-ROM.

 Owner’s Manual (hardcopy booklet)

Describes how to set up your MX49/MX61 and how to perform basic operations. This is the document you should

read first when you start playing and using the MX49/MX61.

 Reference Manual (PDF document)

Describes the internal design of your MX49/MX61, how to use a connected computer, and all parameters that can be

adjusted and set. The manual includes the following contents.

Basic Structure

• Structure of the MX49/MX61

• Controller block

• Tone Generator block

• Effect block

• Arpeggio block

• Song/ Pattern playing block

• Internal memory

• MIDI/Audio signal flow

Using a Connected Computer

• Connecting to a computer

• Creating a Song with a computer

Using iOS Applications

Reference

• Performance

• Song/Pattern settings

•File

• Utility

• Remote mode

 Synthesizer Parameter Manual (PDF document)

Explains the voice parameters, effect types, effect parameters, and MIDI messages that are used for synthesizers

incorporating the Yamaha AWM2 sound generators. Read the Owner’s Manual and Reference Manual first and then

use this parameter manual, if necessary, to learn more about parameters and terms that relate to Yamaha

synthesizers.

 Data List (PDF document)

Provides lists such as the Voice List, Performance List, Arpeggio Type List, Effect Type List, as well as reference

materials such as the MIDI Data table and MIDI Implementation Chart.

How to use the PDF manuals

The Reference Manual, the Synthesizer Parameter Manual, and the Data List are provided as data documents in

PDF format. These PDF files can be viewed and read on a computer. When using Adobe

Reader

to view a PDF

file, you can search for specific words, print a specific page or link to open a desired section in the manual. The

term search and link functions are especially convenient methods of navigating through a PDF file, and we

recommend that you use them. The latest version of Adobe Reader can be downloaded from the following URL.

http://www.adobe.com/products/reader

MX49/MX61 Owner’s Manual

MX49/MX61 Main Features

 Dynamic, MOTIF-based Sounds

The MX49/MX61 contains a wide range of dynamic and authentic waveforms derived directly from the world famous

Yamaha MOTIF (including the realistic instrument sounds of acoustic piano, electric piano, synthesizer, drums, and many

others). These give you exceptionally high-quality sound for playing and recording in various musical genres. Moreover,

you can easily play back phrases of each instrument—even complex phrases impossible to play live—by using the

Arpeggio function. The instrument also features an extensive effect system—including VCM (Virtual Circuitry Modeling)

Effects, REV-X (high grade Reverb) Effects, and Master EQ. In a wide variety of ways, the MX49/MX61 truly enhances

and inspires your music performance and creation.

 Easy-to-use user interface

This instrument has been designed for easy playability and simple, intuitive operation. For example, the Category

buttons let you quickly select a desired Voice from easy-to-understand groups, based on the general instrument type or

sound characteristics. The useful and popular Layer function (playing two Voices together) and Split function (playing

two separate Voices with your left and right hands) can also be set instantly. What’s more, four Knobs are available on the

panel—letting you control twelve aspects of the sound, and tweak them in real time as you play.

 Highly portable, with easy-to-carry design

This instrument can go virtually wherever you go, thanks to its light weight and compact size. The MX49 is designed slim

and trim, so that it easily fits on your desk or in front of your computer. The MX61 has a indented handle at the bottom,

allowing you to easily carry it with one hand.

 Jam along with the Rhythm Patterns and Songs

The MX49/MX61 features a wealth of dynamic Rhythm Patterns in wide variety of musical genres. You can play the

keyboard along with Rhythm Pattern playback—a truly inspiring way to perform! The instrument also conveniently lets

you play back MIDI and Audio data contained in USB flash memory—letting you easily use Song data created on

computer during live performance, without needing a computer! Plus, an [AUX IN] jack allows you to connect a portable

music player, so that you can play the keyboard along with your favorite songs.

 Full music production capabilities—with just the MX49/MX61!

Both MIDI and audio data can be transferred to and from a computer via USB—without the need for a separate audio

interface or a MIDI interface. You can record and play MIDI data, record digital audio data from this instrument directly,

and monitor the DAW sound from the OUTPUT [L/MONO] jack/ [PHONES] jack.

 Integration with Cubase

This instrument is specially designed to work seamlessly with Cubase series software (version 6 or later*), Steinberg’s

full-featured DAW program—giving you a comprehensive, all-in-one music production system, in which hardware and

software are fully integrated. The MX49/MX61 Remote Tools makes integration with Cubase even more convenient, letting

you control transport operations and VSTi parameters directly from the instrument. Simply download the MX49/MX61

related software from the following Yamaha website.

http://download.yamaha.com/

* For information on Cubase series software that supports the MX49/MX61, see the website above.

MX49/MX61 Owner’s Manual

PRECAUTIONS ......................................................4

Introduction .............................................................6

Accessories.............................................................6

About the Accessory Disk .......................................6

Using the MX49/MX61 Manual ...............................7

MX49/MX61 Main Features ....................................8

Controls and Functions 10

Front Panel ...........................................................10

Rear Panel ............................................................12

Setting Up 13

Power supply.........................................................13

Connecting speakers or headphones ...................13

Powering up the system........................................13

Auto Power Off function ........................................14

Adjusting the volume and the brightness of the

display ...................................................................14

Playing the Demo Songs.......................................14

Resetting User Memory to the initial factory

settings..................................................................15

Basic Operation and Displays 16

Moving the cursor..................................................16

Changing (editing) parameter values ....................16

Selecting an item from a List.................................16

Selecting a page ...................................................17

Note settings .........................................................17

Naming (inputting characters) ...............................17

Leaving the current display ...................................17

Quick Guide 18

Playing the Voices.................................................18

Selecting a Voice for Part 1...................................... 18

Selecting a Voice for Part 2...................................... 19

Combining Voices (Layer) ....................................... 19

Playing separate Voices with your left and right hands

(Split)........................................................................ 20

Changing the tonal qualities of the Voice with the

controllers..............................................................21

Controllers on the front panel................................... 21

External Controllers ................................................. 22

Using the Arpeggio function ................................. 22

Playing back the Arpeggio ...................................... 22

Changing the Arpeggio tempo ................................ 23

Changing the Arpeggio type ................................... 23

Keyboard Octave/Transpose settings .................. 24

Octave...................................................................... 24

Transpose ................................................................ 24

Storing the edited settings.................................... 24

Playing the Performances .................................... 24

Playing back Rhythm Patterns ............................. 25

Playing the keyboard with the Rhythm Pattern ........ 25

Changing the Rhythm Pattern type and sound........ 26

Changing the tempo for the Rhythm Pattern ........... 26

Playing the keyboard along with Songs ............... 27

Songs compatible with this instrument .................... 27

Playing back MIDI data of the USB flash memory... 27

Playing back audio data of the USB flash memory . 28

Playing back song data of a portable music player 29

Creating an original Performance......................... 29

Selecting the Reverb/Chorus type

(Common Edit/Part Edit) .......................................... 29

Changing the Insertion Effect of the Voice

(Voice Edit)............................................................... 31

Changing the Controller Set for the Voice

(Voice Edit)............................................................... 32

Storing a Voice (Voice Store) ................................... 33

Storing a Performance (Performance Store)............ 33

Changing Voices smoothly while performing ....... 34

Making Global System Settings (Utility settings).. 35

Changing the Master Tune setting........................... 35

Adjusting the brightness of the display

(LCD Contrast) ......................................................... 35

Saving/loading files on USB flash memory

(File settings)........................................................ 35

Formatting the USB flash memory ........................... 35

Saving settings to USB flash memory...................... 36

Loading the settings from a USB flash memory ...... 36

Connecting an external MIDI instrument .............. 37

Controlling the MX49/MX61 from an external MIDI

keyboard or synthesizer........................................... 37

Controlling an external MIDI keyboard or synthesizer

from the MX49/MX61................................................ 38

Appendix 39

Shift Function List................................................. 39

Display Messages ................................................ 39

Troubleshooting.................................................... 41

Specifications ....................................................... 44

Index .................................................................... 45

Contents

MX49/MX61 Owner’s Manual

Front Panel

[MASTER VOLUME] knob (page 14)

Adjusts the volume of the overall sound.

Pitch Bend Wheel (page 21)

Bends the pitch of the notes up or down while playing

the keyboard.

Modulation Wheel (page 21)

Controls vibrato applied to the sound.

Knobs [A] – [D] (page 21)

These four highly versatile knobs let you adjust various

aspects or parameters of Parts 1 and 2.

[KNOB FUNCTION] button (page 21)

Changes the functions assigned to Knobs [A] – [D].

[PART 1-2 LINK] button (page 21)

Determines the sound which is applied to the Knob

effects.

[DAW REMOTE] button (See Reference

Manual)

Turning on this button enters the Remote mode. The

Remote mode lets you control DAW software on your

computer from the panel controls of the instrument.

TRANSPOSE [-]/[+] buttons (page 24)

Use these buttons to raise or lower the pitch of the notes

in semitone steps.

OCTAVE [-]/[+] buttons (page 24)

Use these buttons to change the note range of the

keyboard.

Transport buttons (pages 25 and 27)

[ ] (Stop) button

Press to stop playback of Rhythm Pattern or Song data.

[ / ] (Play/Pause) button

Press to alternately start/pause playback of a Rhythm

Pattern or Song data from the current point.

[FILE] button (page 35)

Calls up the File display from which you can transfer files

between this instrument and USB flash memory.

[UTILITY] button (page 35)

Calls up the Utility display from which you can set

parameters that apply to the entire system of this

instrument.

[EDIT] button

Calls up the display from which you can edit a

Performance (page 24).

[JOB] button (Refer to the Reference Manual)

Calls up the Performance Job or Utility Job display.

[STORE] button

Stores the Performance/Voice/Utility settings.

[PERFORMANCE NUMBER] display

Indicates the number of the selected Performance.

Controls and Functions

C2 D2 E2 F2 G2 A2 B2 C3 C4

(The illustration is of the MX49; however, the controls and terminals of the MX61 are the same.)

MX49/MX61 Owner’s Manual

Controls and Functions

[SELECT] button (page 24)

Calls up the display from which you can select a

Performance.

LCD (Liquid Crystal Display) (page 14)

The backlit LCD indicates the parameters and values

related to the currently selected operation or function.

[DATA] dial (page 16)

Changes the selected value in the display.

[SHIFT] button (page 39)

Pressing this button along with another button enables

you to execute various alternate commands of the

respective buttons.

[INC/YES]/[DEC/NO] buttons (page 16)

For increasing/decreasing the value of the currently

selected parameter.

Cursor buttons (page 16)

These move the “cursor” around the display, and scroll

through the pages of the edited display.

[EXIT] button

The menus and displays of the MX49/MX61 are

organized according to a hierarchical structure. Press

this button to exit from the current display and return to

the previous level in the hierarchy.

[ENTER] button

Use this button to select the display to be edited, to

define the value, and to execute a Job or a Store

operation.

[LAYER] button (page 19), [SPLIT] button

(page 20)

These buttons respectively layer different Voices of Parts

1 and 2, and split the keyboard into left and right parts.

[ARP] button (page 22)

Determines whether the Arpeggio function is applied to

the entire Performance or not.

[RHYTHM PATTERN] button (page 25)

Calls up the display from which you can select a Rhythm

Pattern.

[EXT. SONG] (External Song) button (page 27)

Calls up the display from which you can select Song

data of the USB flash memory connected to the USB [TO

DEVICE] terminal.

[TEMPO] button (pages 23, 26 and 27)

Calls up the display from which you can set the tempo

for the Arpeggio/ Rhythm Pattern/ Song.

Voice Category button (page 18)

Selects a Voice category for Part 1/Part2.

[PART SELECT] button

Calls up the display from which you can select a Part

from Parts 1 – 16 and play it.

C5 C6

MX49/MX61 Owner’s Manual

Controls and Functions

Rear Panel

DC IN jack (page 13)

Connect the supplied power adaptor to this connector.

(Standby/On) switch (page 13)

Press to turn the power On ( ) or set to Standby ( ).

MIDI [IN]/[OUT] terminals (page 37)

MIDI [IN] is for receiving control or performance data

from another MIDI device.

MIDI [OUT] is for transmitting all control, performance

and playback data from this instrument to another MIDI

device.

USB terminals

There are two different types of USB terminals, and the

rear panel of the instrument features both.

The USB [TO HOST] terminal is used to connect this

instrument to the computer via a USB cable and allows

you to transfer MIDI data and audio data between the

devices. For information about the Port handled by the

MX49/MX61, refer to the “Reference Manual” PDF

document.

The USB [TO DEVICE] terminal is used to connect this

instrument to a USB flash memory via a USB cable. For

details, see pages 27 and 35.

[SUSTAIN] jack (page 22)

For connection of an optional FC3/FC4/FC5 Footswitch.

When connecting a FC4/FC5, this also enables

footswitch control over various other functions.

[FOOT CONTROLLER] jack (page 22)

For connection of an optional FC7 Foot controller. This

jack lets you continuously control one of various different

assignable functions—including volume, tone, pitch, or

other aspects of the sound.

[AUX IN] (Auxiliary Input) jack (page 29)

The Auxiliary Input stereo mini-jack is used to input audio

from an external audio device. For example, you can use

this jack to connect a portable music player and play

along with your favorite music.

NOTE

Use the external device’s volume control to adjust the

desired level balance with this instrument.

OUTPUT [L/MONO]/[R] jacks

Line level audio signals are output via these phone jacks.

For monophonic output, use only the [L/MONO] jack.

[PHONES] (Headphone) jack

This standard stereo phones jack is for connection to a

set of stereo headphones. The audio output is identical

to that of the OUTPUT [L/MONO]/[R] jack.

MX49/MX61 Owner’s Manual

Power supply

Make connections for the supplied power adaptor

(page 44) in the following order. Before you connect the

power adaptor, make sure that the power of this

instrument is set to Standby status ( ).

1 Wrap the DC output cable of the power

adaptor around the cable clip (as shown

below), then connect the plug of the adaptor

to the DC IN jack on the rear panel.

NOTE Use of the cable clip prevents accidental unplugging of the

cable during operation. Make sure to avoid tightening the

cord more than necessary or pulling on the cord strongly

while it is wrapped around the cable clip to prevent wear on

the cord or possible breakage of the clip.

2 Connect the other end of the power adaptor

to an AC outlet.

NOTE Follow this procedure in reverse order when disconnecting

the power adaptor.

WARNING

Use only the specified adaptor (page 44). The use of other

adaptors may result in irreparable damage to both the

adaptor and the instrument.

CAUTION

Even when the power of this instrument is in the Standby

status, electricity is still flowing to the instrument at the

minimum level. When you are not using the instrument for a

long time, make sure you unplug the power adaptor from the

wall AC outlet.

Connecting speakers or

headphones

Since this instrument has no built-in speakers, you will

need to monitor the sound of the instrument by using

external equipment. Connect a set of headphones,

powered speakers, or other playback equipment as

illustrated below. When making connections, be sure that

your cables have the appropriate ratings.

NOTICE

Before connecting this instrument to external devices, turn

off the power to all the devices.

Powering up the system

Make sure the volume settings of this instrument and

external devices such as powered speakers are turned

down to the minimum before turning the power on. When

connecting this instrument to the powered speakers, turn

on the power switch of each device in the following order.

When turning the power on:

First, turn the power of the MX49/MX61 on with the

(Standby/On) switch, then turn the power of the

connected powered speakers on.

When turning the power off:

First, turn the power of the connected powered speakers

off, then turn the power of the MX49/MX61 off with the

(Standby/On) switch.

Setting Up

Power adaptor

AC outlet

MX49/MX61

Powered speaker

(Left)

Powered speaker

(Right)

OUTPUT [L/MONO] OUTPUT [R]

Headphones

[PHONES]

Standard mono phone

plugs

Standard stereo phone plug

MX49/MX61

Standby/On switch DC IN

MX49/MX61 Owner’s Manual

Setting Up

Auto Power Off function

To prevent unnecessary power consumption, this

instrument features an Auto Power Off function that

automatically turns the power off if the instrument is not

operated for a specified period of time. In the default

settings, the power will be turned off if this instrument is

not operated for 30 minutes.

If you wish to disable the Auto Power Off function, turn the

power on while holding down the lowest key on the

keyboard. An “Auto power off disabled” message

appears briefly and Auto Power Off is disabled. The

setting is retained even if the power is turned off.

The amount of time that elapses before the power is

automatically turned off can be set by the following

operation.

[UTILITY]  Select “01:General” with Cursor [ ] button

 [ENTER]  Select “AutoOff” with Cursor [ ] button,

then change the value with [DATA] dial  [STORE]

NOTICE

• Depending on the instrument status (for example, the

settings have been modified but not yet stored), the power

may not turn off automatically, even after the elapse of the

specified period of time. Always turn off the power

manually when the instrument is not in use.

• When the instrument is not operated for a specified period

of time while connected to an external device such as an

amplifier, speaker or computer, make sure to follow the

instructions in the Owner’s Manual to turn off the power to

the instrument and the connected devices, in order to

protect the devices from damage. If you do not want the

power to turn off automatically when a device is

connected, disable Auto Power Off.

• When Auto Power Off is set to “off,” the value will be

retained even if the backup data saved on another device

is loaded to the instrument. When Auto Power Off is set to

something other than “off,” the value will be overwritten

with loaded data.

• Keep in mind that the amount of time that elapses before

the power automatically turns off is reset to 30 minutes if

you execute the Factory Set function (page 15).

NOTE • The setting time is approximate.

• To turn the power on after Auto Power Off has been exe-

cuted, press the Standby/On switch once to set it to

Standby, and then press it again to set to On.

Adjusting the volume and

the brightness of the

display

Adjust the volume levels of this instrument and the

connected amplifier/speaker system.

NOTE When connecting to a set of powered speakers or PA

equipment, set the Master Volume to about 70%, then raise

the volume of the powered speakers or PA equipment to the

appropriate level.

CAUTION

Do not listen with the headphones at high volume for long

periods of time. Doing so may cause hearing loss.

If the display is not easily visible, while holding down

[UTILITY], press [INC/YES]/[DEC/NO] to adjust for

optimum visibility.

Playing the Demo Songs

The MX49/MX61 features a variety of Demo Songs,

showcasing its dynamic sound and sophisticated

functions.

Here’s how to play them back.

Press [FILE] and [UTILITY] at the same time.

The DEMO display is called up.

Rotate the [DATA] dial to select a Demo Song.

3 Press [F/ K] (Play/Pause) to play back the

Demo Song.

The Demo Song currently shown on the display starts.

NOTE To adjust the volume level of the Demo Songs, use the

[MASTER VOLUME] Knob.

4 Press [J] (Stop) to stop the Demo Song.

In order to leave the DEMO display, press

[EXIT].

MX49/MX61

Adjust the volume

with the [MASTER

VOLUME] knob.

Adjust the display contrast.

MX49/MX61 Owner’s Manual

Setting Up

Resetting User Memory to

the initial factory settings

The original factory settings of this synthesizer’s User

Memory can be restored as described here. The

Performances, User Voices, and Utility settings of the

User Memory will be reset to the initial factory settings.

This operation is especially handy when you’ve

unintentionally deleted or overwritten the Performances

or Utility settings.

NOTICE

When the factory settings are restored, all the Performance,

User Voice, and system settings in the Utility display you

created will be erased. Make sure you are not overwriting any

important data. Be sure to save all important data to your

USB flash memory before executing this procedure

(page 36).

1 Press [UTILITY], then press [JOB].

The Utility Job Select display is called up.

2 Use the Cursor [ ]/[ ] buttons to select the

“02:FactrySet,” then press [ENTER].

The Factory Set display is called up.

3 Press [ENTER].

The display prompts you for confirmation. To cancel

this operation, press [DEC/NO] here. In this case, in

order to return to the top display, press [EXIT]

repeatedly if necessary after canceling.

NOTICE

When setting the “Power On Auto” to on and executing

Factory Set, the Factory Set operation will automatically be

executed each time you turn the power on. Keep in mind that

this also means that your original data in the User Memory

will be erased each time you turn on the power. Therefore,

the parameter normally is set to off. If you set it to off and

execute Factory Set, the Factory Set operation will not be

executed when turning the power on the next time.

4 Press [INC/YES].

The Factory Set operation is executed.

NOTICE

For Factory Set operations that take longer to process, you

will see a message during processing. While such a

message is shown on the display, do not turn off the power.

Turning the power off in this state results in loss of all user

data and may cause the system to freeze (due to corruption

of data in the User Memory). This could also result in the

instrument not being able to start up properly, even when

turning the power on next time.

5 Press [EXIT] several times to return to the top

display.

JOB*Factory*Set

****PowerOn*Auto=off

qw**Are*you*sure?***

e****[NO]/[YES]****r

MX49/MX61 Owner’s Manual

Moving the cursor

The display cursor indicates a selected item and is

shown in the three following types.

 Arrow type

This flashing triangular cursor indicates the selected

item’s line. You can move the cursor up or down by using

the Cursor [ ]/[ ] buttons.

 Flash type

The selected item itself flashes. You can move the cursor

indication up/down/left/right by using the Cursor [ ]/[ ]/

[ ]/[ ] buttons.

 Underline type

This flashing underline indicates the selected item. This

display actually has two cursor indicators: the underline

and the flash type. You can move the flash type cursor by

using the Cursor [ ]/[ ] buttons in this display, and

move the underline type cursor by using the Cursor [ ]/

[ ] buttons.

Changing (editing)

parameter values

Rotating the [DATA] dial to the right (clockwise) increases

the value, while rotating it to the left (counter-clockwise)

decreases it. Pressing the [INC/YES] button increases a

parameter value by one step, and pressing [DEC/NO]

decreases it. Pressing and holding either button

continuously increases or decreases the value. For

parameters with large value ranges, you can increase the

value by 10 by while holding down the [SHIFT] button

and pressing the [INC/YES] button. To decrease by 10,

simultaneously hold down the [SHIFT] button and press

the [DEC/NO] button.

Selecting an item from a

List

When there are multiple displays to be edited, the name

of each display is indicated in a scrollable list as a

selected item.

In order to switch the selected item, use the Cursor [ ]/

[ ] buttons, then press [ENTER] to define the selection.

The icon displayed to the left of number indicates that

other items are available up (s) or down (a) in the list.

Basic Operation and Displays

STR:081:Amb*Pizza

001:CncrtGrandc

Selected item

DrumKit

*Insert*Eff*

***

REV:

****

SPX

Hall

Selected item

AP*:*001:CncrtGrand

tyuiop@000123456789

Selected item

Increases

number

Decreases

number

Decreases

number

Increases

number

Common

01:Chorus*Eff

Number of the

selected item

Name of the selected item

(display to be edited)

Other selected item(s) available

further down

Other selected items available

either up or down

Other selected item(s) available

further up

MX49/MX61 Owner’s Manual

Basic Operation and Displays

Selecting a page

The display to be edited may consist of multiple pages.

In this case, the upper (s)/ lower (a) icons are indicated

at the bottom left of the display. You can select a page by

using the Cursor [ ]/[ ] buttons.

Note settings

Pressing a key lets you set a note value for the Split Point

parameter (page 20). You can set the desired Split Point

by holding down [SPLIT] and pressing the corresponding

key (only when [SPLIT] is set to on; the lamp lights).

Naming (inputting

characters)

You can freely name the data you’ve created, such as

that of Voices and Performances. First, move the cursor

to the desired location in the name with the Cursor [ ]/

[ ] buttons, and select the character by using the

[DATA] dial or the [INC/YES]/[DEC/NO] buttons.

Leaving the current

display

If you wish to return to the previous display from the

current display, press [EXIT]. In order to return to the top

display, press [EXIT] repeatedly.

NOTE If you wish to leave the Remote mode (refer to the

“Reference Manual” PDF document), you need to press

[DAW REMOTE] instead of [EXIT].

DrumKit

*Insert*Eff*

***

REV:

****

SPX

Hall

Indicates availability

of other pages

Parameter which can be edited

Split Point

Common*Name

*******[Simple*Bld]

Selected location flashes

MX49/MX61 Owner’s Manual

Playing the Voices

The MX49/MX61 consists of 16 Parts. Voices, which are

the basic sounds and building blocks of the MX49/MX61,

are assigned to each Part. After the instrument is turned

on, the top display which appears shows the Voices of

only Parts 1 and 2. With the default settings, playing the

keyboard will sound only the Voice for Part 1. Select the

desired Voice from the various preset Voices and play it.

Top display

Selecting a Voice for Part 1

The Voices of the MX49/MX61 are conveniently divided

into specific categories, each based on a general

instrument type or sound characteristic. In order to select

a Voice, first select a category.

Here, you’ll learn how to change Voices and play a Voice

while Part 1 is selected.

NOTE For lists of the Voices and categories, see the “DATA LIST”

PDF document.

1 Press the desired Voice Category button.

2 Rotate the [DATA] dial to select the desired

Voice in the selected category.

3 Play the keyboard.

4 Repeat steps 1 – 3 to play the various Voices.

Quick Guide

HINT

The instructions of the “Playing the Voices” section

assume that you are starting from the top display

with the default settings immediately after turning

this instrument on. If the instrument is in a different

status, or for some reason you cannot return to the

top display with the default settings, simultaneously

hold down [SHIFT] and press [SELECT]. This is the

Quick Reset function and allows you to return

operation to the same top display as when the

instrument is first turned on.

NOTICE

Executing the Quick Reset function above erases any

edited data. Be sure to store important data to internal

memory (page 33).

NOTE For details about this function, see the “Shift Function

List” (page 39).

STR:081:Amb

Pizza

AP 001:CncrtGrandc

001:CncrtGrandcAP

Voice for Par t 1

Voice for Par t 2

Voice

Yamaha MX49, MX61 Инструкция по применению

Похожие модели бренда