МИКРОСИСТЕМА С DVDDVD MICRO SYSTEM
Руководство по эксплуатации Instruction manual
H-MS1104
2
Table of contents
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended
to read this manual carefully before connecting, operating and/or adjusting the
product and keep the manual for reference in the future.
12
12
12
12
12
12
12
12
12
12
12
12
12
13
13
14
15
15
16
16
16
17
17
17
19
19
19
19
20
21
Table of contents
Before you start
Utilization of the product
Important safeguards
Supported formats
Connection
Video system connection
Audio system connection
Operation
Control elements
Front panel
Rear panel
Remote controller
Changing the battery
Button functions
Standby
Open/Close
Number buttons
Goto
Setup
Play/Pause
Mute
PBC
Angle
V-Mode
Prog
OSD
Source select
Rewind/Fast forward
Vol +/-
Previous/Next
Title/AM/FM
Subtitle/Auto
2
3
3
3
4
5
5
6
8
8
8
8
9
10
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
Audio/Memory
Menu/MO/ST
Cursor buttons
Enter
S.Effect
Ch-Level
Tone
USB
Step
Zoom
Repeat
A-B
Stop
System setup
General setup
Audio setup
Video setup
Preference setup
Password setup
Radio operation
Various disc operation
MP3/JPEG/MPEG4 background
MP3/MPEG4 playback
USB/SD/MMC operatoin
General information
Handling compact discs
Cleaning discs
Accessories
Troubleshooting
Specification
3
Before you start
If you want to dispose this product, do not mix it with general household waste.
There is a separate collection system for used electronic products in accordance
with legislation that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By
doing so, you will ensure that your disposed product undergoes the necessary
treatment, recovery and recycling and thus prevent potential negative effects on
the environment and human health.
Utilization of the product
Important safeguards
Alerts the user to the presence
of dangerous voltage within the
product’s enclosure.
Alerts the user to the presence
of important operating
instructions.
To reduce the risk of electric
shock or fire, do not open the
cover. Refer servicing to qualified
service personnel.
This mark indicates this unit
belongs to class 1 laser product.
• To prevent the risk of fire or electric
shock, don’t allow water to come into
contact with the device and don’t use the
device in high humidity conditions.
• The device is equipped with high
voltage components and a laser system,
hence you shall not open the device and
repair it by yourself. The laser beam is
dangerous to eyes when the housing is
removed. Don’t look at it.
• When the device is moved from cold
premises to the warm room or vice versa,
condensate may form on the laser head
and the device may not operate properly.
In this case please turn the device on for
1-2 hours without disc before playback to
heat it to a proper operation temperature.
• Don’t try to manually open or close
the disc tray to load discs.
• Disconnect the receiver only when
there is no disc therein.
• If you are not going to use the device
for a long time disconnect it from the wall
outlet.
• Before turning the device on, please
make sure that you have connected it
properly, adjust the volume of speakers
and amplifiers of your system to the
minimum. Adjust the volume as necessary
only after normal playback has started to
avoid damage of your audio system.
• Use supply sources of rated voltage,
otherwise the unit may not function or
may be damaged.
• Place the unit on a horizontal surface.
Keep the unit ventilated. Don’t block
the heat hole. Overheat may cause
malfunction.
• Do not place any objects on
Warning
Warning
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4
Before you start
the cover, this may make it function
improperly (incorrect playback).
• Please place the unit in a dry and
well-aired area. Do not place it near
heating units or expose it to direct
sunlight, mechanical vibration, humidity or
excessive dust.
• Never use liquid detergents,
abrasives or organic compounds (alcohol,
Supported formats
Disc types Symbol Contents
DVD
Compressed digital audio - video
MPEG4 (DivX)
Compressed digital audio - video
Video-CD (VCD)
Compressed digital audio - video
Super-VCD (SVCD)
Compressed digital audio - video
CDDA
Digital audio
MP3
Compressed digital audio
WMA
Compressed digital audio
Kodak Picture CD
Compressed digital static image
JPEG Compressed digital static image
gasoline, etc) to clean the unit body.
• All repairs and technical service
should be made by qualified specialist
from service centers.
All images provided herein are
schematic drawings of real objects
and may differ from their real images.
5
Connection
Video system connection
TV/monitor video input
Y
U/Pb V/Pr
Y
U/Pb
V/Pr
component
video input
component
video output
composite video and
S-video input
composite video and
S-video output
SCART input
SCART output
Unit video output
Before you start connection of external devices, ensure that power of the unit is
switched off.
Following video outputs are available in
this unit.
Composite video
Use the cable with yellow plug of an
AV cable to connect the composite video
output of this unit to the video input of a
TV/monitor.
Component video
Use a 3-core AV cable to connect the
component outputs of this unit to the
corresponding inputs of a TV/monitor.
S-Video
6
Connection
Use an S-Video cable to connect the
S-Video output of this unit to the S-Video
input of a TV/monitor.
SCART
Use a 21-pin SCART cable to connect
the SCART output of this unit to the TV/
monitor SCART input.
The connection you should make
depends on the TV/monitor input
terminals. Don’t make all the connections
at the same time; otherwise the produced
picture will be affected.
Audio system connection
TV/monitor/amplifier audio input
Speakers
Speakers
2CH audio input
2CH audio output
Coaxial audio
input
Coaxial audio
output
Unit audio output
7
Connection
Two types of audio output systems:
analog audio and digital audio. Analog
audio includes 2-channel stereo. Digital
audio includes optical and coaxial output.
Stereo audio
Use a pair of AV cables (red for right/
white for left) to connect the stereo audio
outputs of this unit to the TV or a stereo
input of power amplifier.
Coaxial digital audio
Use the special coaxial cable to
connect the coaxial output of this unit to
the coaxial input of power amplifier.
Speaker output
Use the specified cable in the
accessories to connect this unit to the
input of sound boxes.
The physical connection should
accord to the audio output setup of this
unit.
8
Operation
Control elements
Front panel
1. PLAY/PAUSE button
2. PREVIOUS button
3. NEXT button
4. SOURCE button
5. Display
6. VOLUME regulator
7. OPEN/CLOSE button
8. STANDBY button
9. Headphone out
10. Disc tray
11. SD/MS/MMC card slot
12. USB slot
Rear panel
1. Power switch
2. Speaker output
3. Microphone input
4. SCART output
5. Video output
6. Line input
7. S-Video output
8. L/R audio output
9. Coaxial audio output
10. Component video output
11. FM antenna jack
12. AM antenna jack
12345 6
7
8
910 1112
1
2
3
4
5
6
7
8 9 10 11 12
9
Operation
Remote controller (RC)
1. STANDBY button
2. Number buttons
3. GOTO button
4. SETUP button
5. PBC button
6. PROG button
7. SEARCH (
/ ) buttons
8. TITLE/AM/FM button
9. ENTER button/
cursor buttons (
/ / / )
10. AUDIO/MEMORY button
11. CH-LEVEL button
12. S.EFFECT button
13. USB button
14. REPEAT button
15. A-B button
16. OPEN/CLOSE button
17.
button
18. button
19. ANGLE button
20. V-MODE button
21. SOURCE SELECT button
22. OSD button
23. СН ( / ) buttons
24. VOL+/VOL- buttons
25. SUBTITLE/AUTO button
26. MENU/MO/ST button
27. TONE button
28. ZOOM button
29. STEP button
30.
button
116
17
18
19
20
21
22
23
24
25
26
27
28
29
30
2
3
4
5
6
7
8
9
10
11
12
13
14
15
10
Operation
Changing the battery
1. Remove the battery compartment
cover on the back of the RC.
2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• Use two AAA/1.5V batteries for the
RC. The RC should be pointed at remote
sensor within 8 meters and within 30
degrees at the left or the right side.
• Take the battery out of the RC if it is
not used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries
can leak and severely damage the RC.
Button functions
STANDBY
When playing, press STANDBY button,
the unit will be power-off and go to
standby state. Press STANDBY again, the
unit will be switched on and start playing.
Warning: The power is not fully cut off at
standby state. If the unit will not be used for
a long time, turn off the power by pressing
STANDBY button on the front panel.
You can also switch off the unit by
pressing STANDBY switch on the panel.
OPEN/CLOSE
Press OPEN/CLOSE button when
power on, the disc tray is pushed out. Put
the disc on the tray with the title faced
up. Press OPEN/CLOSE again to close
the disc tray and the unit starts playing
automatically. (Without auto-play function
for MP3 and JPEG discs).
Number buttons
Press number buttons to input digits
(channel numbers, playback time etc.).
GOTO
Press GOTO button to enter the menu
enabling to select playback start time for
the title, track or chapter, and to set some
other playback parameters. To quit the
menu press GOTO button.
SETUP
Press SETUP button, the on-screen
setup menu will be display.
(PLAY/PAUSE)
When playing the disc, press PLAY/
PAUSE button on the unit or
button
on the RC to pause, press the button
again to return to normal play.
Press button, no sound will be
heard and the mute symbol will display on
the TV screen. Press
button again,
and the sound will resume.
PBC
Put the disc that supports PBC function
into unit, press PBC button, TV display
will show menu. You can change the
page using
or buttons until you
choose menu picture or title number that
11
Operation
button.
/
• Press these buttons for fast forward
or fast rewind; with each pressing the
speed will change as follows: Х2 – Х4 –
Х8 – Х16 – Х32 - normal.
• In Radio mode press the buttons to
search strong signal stations manually.
VOL+/-
Press VOL+ to adjust volume up. Press
VOL- to adjust volume down. You can
also rotate VOLUME knob to adjust the
sound volume level.
/
• In Radio mode press these buttons
for manual adjustment of stations with
strong signal.
• When playing DVD disc, press
to
go to the previous chapter or
to go to
the next chapter.
• When playing SVCD, VCD, CD disc,
press
to go to the previous track or
press
to go to the next track.
TITLE/AM/FM
• When playing DVD disc, press TITLE/
AM/FM button to open the title list (for
some units – to open the title menu).
• In Radio mode press TITLE/AM/FM
button to choose band – AM or FM.
SUBTITLE/AUTO
• When playing the disc with multi-
subtitle function, press SUBTITLE/AUTO
to select the subtitle language.
• In Radio receiving mode use this
button to automatically adjust and save all
stations with strong signal.
you need, then press the number button
to choose. When PBC is turned off, disc
will play according original order (This
function is only available in discs that
support VCD2.0).
ANGLE
When playing the disc with multi-angle,
press ANGLE button to change view angle.
V-MODE
Press V-MODE button to switch the
video output mode (YUV/P-YUV/RGB/P-
RGB/OFF).
PROG
• If the disc has 2 or more tracks,
chapters or titles, set up the playing order
to your preference. Press PROG button to
enter program menu.
• Press digit button to input the
number of the track, title or chapter. If the
programmed tracks are over ten, move the
cursor to
item and press ENTER button
to go on programming (maximum 20
programmable items). Use cursor buttons
to move the cursor to the START. Press
ENTER button to start PROGRAM play.
• When playing MP3 disc,
programming is not available.
• To quit the programming menu press
PROG button or move the cursor on EXIT
item and press ENTER button.
OSD
Press the OSD button, the relative
information of the current playback will
display on the screen.
SOURCE SELECT
You can switch among various signal
sources by pressing SOURCE SELECT
12
Operation
AUDIO/MEMORY
• When playing DVD with more than
one audio language, press AUDIO/
MEMORY button to select you desired
audio language.
• In Radio mode use this button to save
the current station into the unit memory.
MENU/MO/ST
• When playing DVD disc, press
MENU/MO/ST button once to open the
disc menu.
• In Radio mode use this button to
select the Mono or Stereo mode.
Cursor buttons
Press cursor buttons for navigation in
various menus.
ENTER
Press ENTER button to confirm input
data or selected options.
S.EFFECT
Press S.EFFECT button to change the
surround sound (DSP 1-6) effect.
CH-LEVEL
Press this button to select left or right
channel, then press VOL buttons to adjust
its level.
TONE
Press TONE button to select bass or
treble frequency, then press VOL buttons
to change the volume of the selected
frequency.
USB
Insert the USB device into the slot on
the front panel. Press USB button to play
content of the USB device.
STEP
• When playing DVD, SVCD, VCD
disc, press STEP button once, the picture
changes to next frame. Press
button
to resume normal play.
ZOOM
• When playing DVD, SVCD, VCD disc,
press ZOOM to zoom in or zoom out the
picture.
• In zoom in mode, press cursor to
move the picture for viewing. The picture
cannot be moved in zoom out mode.
REPEAT
Press REPEAT button to repeat a title,
chapter, track or the whole disc.
• When playing DVD disc, press
REPEAT button continually to repeat
chapter => title => all => repeat off.
• When playing SVCD, VCD, CD disc,
press REPEAT button continually to
repeat track => all => repeat off.
• When playing MP3 disc, press
REPEAT button continually to play folder
=> single => repeat track => repeat folder.
A - B
• Press A-B button at the start point
(A) and the ending point (B) to select the
repeat fragment.
• Press A-B button the third time to
cancel fragment repeat and return to
normal play.
When playing DVD/VCD/SVCD/CD
disc, press
button once, the unit
will memorize the previous ending point.
Press
button to continue playback.
Press
button twice; not playback can
only be resumed from the beginning of
the disc.
13
Operation
System setup
1. Press SETUP button to enter the setup
menu. In Setup menu, press SETUP
button again to quit the setup page.
2. Use
/ buttons to choose a setup
page: General setup, Audio setup, Dolby
setup,Video setup, Preference page.
3. Press button to enter the setup
page selected.
4. Use
/ buttons to select the
option you want to adjust.
5. Press
button to enter the
adjustment list. Use
/ buttons to
select the adjustment and press ENTER
button to confirm and
button to return
to options list.
6. To return to setup page list press
button when in the option list.
The items in gray can’t be set up.
The setup is memorized and kept after
power is off.
General setup
GENERAL SETUP PAGE
GOTO GENERAL SETUP PAGE
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
LAST MEMORY
• TV DISPLAY
4:3 PanScan: When the unit connects
to the normal TV set, the wide-screen
image shows on the full screen, but some
part is cut off.
4:3 LetterBox: When the unit connects
to the normal TV set, the wide-screen
image shows and black bars appear on
the top and bottom of screen.
16:9: Use this item when the unit is
connected with the wide screen TV set.
Wide squeeze: Use this item when the
unit is connected with the normal TV set,
if you want to squeeze the picture.
• ANGLE MARK
It will show the angle mark when
playing DVD disc with multi-angle view if
selecting On.
• OSD LANGUAGE
Select on-screen display language:
English, Russian.
• CLOSED CAPTIONS
This function doesn’t work with discs
without captions. If Caption is Off, press
SUBTITLE button on the RC to set
Caption on. The default setup is On.
• SCREEN SAVER
If Screen saver is set ON and the unit
is switched on without a disc playing
for several minutes, a moving picture
appears on the screen, and the unit will
go to standby mode after several minutes.
Press STANDBY button to wake it up.
• LAST MEMORY
When this function is on, the unit can
memorize the time elapsed from the last
time you played the disc. Then at the next
playing, it will resume playing from the
memorized point.
14
Operation
Audio setup
AUDIO SETUP PAGE
GOTO AUDIO SETUP PAGE
ANALOG AUDIO SETUP
DIGITAL AUDIO SETUP
DOLBY DIGITAL SETUP
HDCD
KARAOKE SETUP
ANALOG AUDIO SETUP PAGE
SET DOWNMIX MODE
DOWNMIX
• DOWNMIX
LT/RT: The audio out is Left and Right
channels format even if the original sound
is 5.1CH format.
Stereo: The audio out format is stereo
even if the original sound is 5.1CH format.
DIGITAL AUDIO SETUP PAGE
SETUP SPDIF
DIGITAL OUTPUT
LPCM OUTPUT
• DIGITAL OUTPUT
SPDIF off: no digital signal out (coaxial
output off), only analog audio output.
All: digital signal output in the original
format recorded in the disc.
PCM only: digital signal output in the
decoded PCM form.
• LPCM OUTPUT
Select PCM frequency at 48 kHz/96 kHz.
Some amplifiers don’t support 96
kHz sampling and cause coaxial output
abnormal.
The initial factory setup is 48 kHz.
DOLBY DIGITAL SETUP
DUAL MONO (1+1) SETUP
DUAL MONO
DYNAMIC
• DUAL MONO
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average
signal.
• DYNAMIC
If watching large dynamic scope movie
program at night, by selecting this mode
you can reduce volume to a very low level
and at the same time keep the fine details
sounds. In this case, this doesn’t disturb
the family and keep the quality sound.
HDCD
You can select the digital filter Off, 1x,
2x.The initial factory setup is 1x.
15
Operation
KARAOKE SETUP
Set the microphone ON or OFF and
adjust the microphone volume and echo.
Video setup
VIDEO SETUP PAGE
GOTO VIDEO SETUP PAGE
VIDEO OUTPUT
COLOR SETTING
• VIDEO OUTPUT
OFF: set video output to the composite.
YUV: set video output in analog
component video format when connecting
to Y/U/V terminals
P-YUV: set progressive YUV signals.
Connection same as YUV.
RGB: set video output in Red/Green/
Blue format when connecting to SCART
terminals.
P-RGB: progressive RGB signals.
Connection same as RGB.
If the video setting differs with the
physical connection, the TV set may be
without picture. In case of no picture, you
can reset the unit, then keep pressing
V-MODE key until the picture is OK again.
• COLOR SETTING
You can set the Sharpness, Brightness,
Contrast, Gamma, Hue, Saturation, Luma
delay according to your preference.
Preference setup
PREFERENCE PAGE
GOTO PREFERENCE PAGE
TV TYPE
PBC
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
• TV TYPE
This unit is suitable for all kinds of TV
systems. You can select one of the PAL,
NTSC or Multi.
Multi: the TV system is auto switched
according to the disc system.
NTSC: this system is used in USA,
Taiwan, Japan etc.
PAL: this system is used in China,
Europe, Hong Kong etc.
• PBC
To set PBC with On, Off. PBC On means
the function is available, Off, no function.
• AUDIO, SUBTITLE, DISC MENU
LANGUAGE SETUP
These are the initial settings by your
preference. If a setting is supported by
disc content, it will work. Otherwise the
disc default value works. And these
settings can be changed respectively
by press AUDIO and SUBTITLE buttons
when playing.
• PARENTAL
The control level is for parental to
control playing content and protect your
children from violence and erotic. The
disc, the level of which is higher than the
setting level can not be played.
• DEFAULT
Reset to the initial factory setups.
16
Operation
or automatic mode find the radio station
you want to save. Then press MEMORY/
AUDIO button, and after it input the
corresponding number to save the
station.
• Repeat all above-note functions to
memorize other radio stations.
• If you want to listen to a radio station
that you have memorized, press
/
buttons and choose the necessary channel.
Various disc operation
MP3/JPEG/MPEG4 background
MP3 - generally adopted standard of
audio compression, compressing audio
data to 1/12 of their size. One CD disc
mat store more than 600 minutes of
music (170 songs). And the quality of
MP3 disc approximates to an audio CD
disc quality.
JPEG (Joint Photographic Expert
Group) - image compression algorithm,
used all over the world and providing high
level of compression of the source data.
Any graphics editor may edit images of
this format and their size in 15-20 times
less then the original images.
MPEG4 - standard for transmitting
audio and video data via channels with
low capacity. This format is very popular
since it made possible to place full-length
movies with good enough resolution in
one CD.
MP3/MPEG4 playback
When a disc or a USB containing files
of these formats is inserted, following
interface will be displayed:
Password setup
PASSWORD SETUP PAGE
GOTO PASSWORD SETUP PAGE
PASSWORD MODE
PASSWORD
Change the password. The initial
factory password is 136900. You can set
your own password. If you forget your
own password, you can use 136900 as
general password.
Radio operation
• Please connect FM/AM antenna to
the jacks on rear panel.
• Press SOURCE SELECT button on
the RC or SOURCE button on the panel
until you enter Radio system, and press
TITLE/AM/FM button to choose FM or AM
range.
• Manual adjustment. Press
/
buttons or
/ buttons to enable
adjustment of radio stations.
• Automatic adjustment. Press and hold
SUBTITLE/AUTO button, the tuner will
automatically find the radio stations. After
finding the station, the radio frequency will
be shown on DVD-player display.
• This unit can memorize 80 radio
stations (FM/AM)
• If you want to save radio station in
memory, you need to choose the memory
item with
/ buttons. In manual
17
Operation
1. Playback info window - shows
current playback time, track number,
volume level, playback status (stop/play/
pause) etc.
2. Address window - shows directory
address at which the currently played file
is found.
3. Directory window - shows the
currently selected directory.
4. Scroll bar - shows file location in the
directory.
5. Preview window - shows the
selected JPEG file thumbnail.
Use
/ buttons to select the
directory you want and press
or
ENTER button to enter it. Select a file and
press
or ENTER button to start its
playback.
JPEG playback notes:
• While a file playback, press
button, 12 thumbnails will be shown on
the screen.
• Press cursor buttons to select the
desired picture.
• Use cursor buttons to select SLIDE
SHOW item, then press
or ENTER
button to start slide show.
• Use cursor buttons to select MENU
item, then press
or ENTER button to
enter button function menu.
The button function menu is as follows:
Button Function
Entering thumbnail mode
Next picture
Previous picture
To play picture
Select CONTINUE item and press ENTER
button to go to the other menu page:
ZOOM Change zoom mode
Zoom in picture
Zoom out picture
Cursor
buttons
Move zoom center
Select EXIT MENU item
and press
ENTER button
to exit.
Depending on file volume and
encoding, some delay is possible when
changing modes or passing to the next
menu item.
USB/SD/MMC operation
Insert a USB drive in the USB port, then
press USB button to play the readable
files in it. Press USB button again to
switch to the DVD mode.
Insert a SD, MS or a MMC card into the
SD/MMC/MS card slot, then press USB
button to play readable files in it.
Press USB button again to switch to the
12
345
18
Operation
DVD mode.
If a USB drive and a memory card
are inserted at the same time, press USB
button once to select USB and press it
twice to select memory card. Press it for
the third time to return to the DVD mode.
SD/MMC/USB up to 2 Gb are
supported by this unit.
19
General information
Handling compact discs
Handling compact discs
• Do not insert anything other than a
CD into the disc tray.
• Do not use cracked, chipped, warped,
or otherwise damaged discs as they may
cause damage to the player.
• Handle the disc only by the edges (as
shown in the picture). To keep discs clean
do not touch its surface.
• Store discs in their cases when not
in use.
• Do not expose discs to direct
sunlight, high humidity, high temperature
or dust.
• Prolonged exposure to extreme
temperature can wrap a disc.
• Do not attach labels, write on or apply
chemicals to the surface of the discs.
• Do not touch the recorded surface of
the discs.
• Use 12-cm CDs. Use only
conventional, fully circular discs. Do not
use irregularly shaped discs.
Cleaning discs
Fingerprints should be carefully wiped
from the surface of disc with a soft cloth.
Unlike conventional records, compact
discs have no grooves to collect dust and
macroscopic dirt, so gently wiping them
with a soft cloth should remove must
panicles. Wipe in a straight motion from
the center to the edge.
Never use thinner benzine, record
cleaner or anti static spray on a compact
disc. Such chemicals can damage its
plastic surface.
Accessories
1. Head unit 1 pc
2. Speaker 2 pcs
3. Remote controller 1 pc
4. Audio-video cable 1 pc
5. AM antenna 1 pc
6. FM antenna 1 pc
7. Battery AAA 1.5V 2 pcs
8. Consumer information 1 pc
9. Warranty card 1 pc
10. Instruction manual 1 pc
20
General information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most
problems likely to emerge when this unit is in use. If below measures do not help, turn
to a service center or to the nearest dealer.
Symptom Cause Solution
No sound Poor audio cable connection Make proper connection
Disc dirty or damaged Clean the disc
MUTE function is on Disable MUTE function
No image Poor video cable connection Make proper connection
Setup doesn’t correspond to the
actual connections
Press and hold V-MODE button until
picture appears
Disc cannot be
read
Disc not inserted Insert the disc
Disc inserted incorrectly Install the disc with the label side
facing up
Condensate on the unit laser
head
Switch the unit on without disc for
an hour
Remote control
does not
operate
Remote control is incorrectly
directed at the unit
Use the remote controller according
to the manual
Distance and angle to the unit
are too large
Decrease the distance and angle
Run out batteries Replace both batteries
Incorrect key sequence Repeat the operation one more time
Static voltage on the unit
housing
Switch the unit off for 1-2 minutes
and then switch it on again
No power Power cord is not connected to
electricity supply network
Insert the power cord securely into
the household socket
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/