МИКРОСИСТЕМА С DVDDVD MICRO SYSTEM
Руководство по эксплуатации Instruction manual
H-MS1101
2 3
Table of contents Before you start
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
11
11
12
12
12
12
12
12
12
12
12
12
13
14
14
14
15
15
16
16
16
17
17
18
18
19
19
19
19
20
21
Table of contents
Before you start
Utilization of the product
Important safeguards
Supported formats
Connection
Video system connection
Audio system connection
External device connection
Line in
AV in
Operation
Control elements
Front panel
Rear panel
Remote controller
Changing the battery
Button functions
Standby
Open/Close
Number buttons
Goto
Setup
Play/Pause
Mute
TNT ON/OFF
Angle
V-Mode
Prog
OSD
Source select
Rewind/Fast forward
Vol +/-
Previous/Next
Title/Copy/AM/FM
Subtitle/Auto
Audio/Memory
Menu/Ripping/MO/ST
Cursor buttons
2
3
3
3
4
5
5
6
7
7
7
8
8
8
8
9
10
10
10
10
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
Enter
S.Effect
Ch-Level
Tone
USB
System
Zoom
Repeat
A-B
Stop
System setup
General setup
Audio setup
Dolby digital setup
Video setup
Preference setup
TV operation
Radio operation
Various disc operation
MP3/JPEG/MPEG4 background
MP3/MPEG4 playback
USB/SD/MMC operation
Ripping
Copying data
Deleting data from USB
General information
Handling compact discs
Cleaning discs
Accessories
Troubleshooting
Specification
2 3
Table of contents Before you start
If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you
will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
Utilization of the product
Important safeguards
Alerts the user to the presence
of dangerous voltage within the
product’s enclosure.
Alerts the user to the presence
of important operating
instructions.
To reduce the risk of electric shock
or fire, do not open the cover. Refer
servicing to qualified service
personnel.
This mark indicates this unit belongs
to class 1 laser product.
• To prevent the risk of fire or electric shock,
don’t allow water to come into contact with
the device and don’t use the device in high
humidity conditions.
• The device is equipped with high voltage
components and a laser system, hence you
shall not open the device and repair it by
yourself. The laser beam is dangerous to eyes
when the housing is removed. Don’t look at it.
• When the device is moved from cold
premises to the warm room or vice versa,
condensate may form on the laser head and
the device may not operate properly. In this
case please turn the device on for 1-2 hours
without disc before playback to heat it to a
proper operation temperature.
• Don’t try to manually open or close the
disc tray to load discs.
• Disconnect the receiver only when there is
no disc therein.
• If you are not going to use the device for a
long time disconnect it from the wall outlet.
• Before turning the device on, please make
sure that you have connected it properly,
adjust the volume of speakers and amplifiers of
your system to the minimum. Adjust the volume
as necessary only after normal playback has
started to avoid damage of your audio system.
• Use supply sources of rated voltage,
otherwise the unit may not function or may be
damaged.
• Place the unit on a horizontal surface.
Keep the unit ventilated. Don’t block the heat
hole. Overheat may cause malfunction.
• Do not place any objects on the cover,
this may make it function improperly (incorrect
playback).
• Please place the unit in a dry and well-
aired area. Do not place it near heating units
or expose it to direct sunlight, mechanical
vibration, humidity or excessive dust.
• Never use liquid detergents, abrasives or
organic compounds (alcohol, gasoline, etc) to
clean the unit body.
• All repairs and technical service should be
made by qualified specialist from service centers.
All images provided herein are schematic
drawings of real objects and may differ
from their real images.
W a rning
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4
Before you start
Supported formats
Disc types Symbol Contents
DVD
Compressed digital audio - video
MPEG4 (DivX)
Compressed digital audio - video
Video-CD (VCD)
Compressed digital audio - video
Super-VCD (SVCD)
Compressed digital audio - video
CDDA
Digital audio
MP3
Compressed digital audio
Kodak Picture CD
Compressed digital static image
JPEG
Compressed digital static image
5
Connection
Before you start connection of external devices, ensure that power of the unit is switched
off.
TV/monitor video input
Y
U/Pb V/Pr
Y
U/Pb
V/Pr
component
video input
component
video output
composite video and
S-video input
composite video and
S-video output
SCART input
SCART output
Unit video output
Video system connection
Following video outputs are available in this
unit.
Composite video
Use the cable with yellow plug of an AV
cable to connect the composite video output of
this unit to the video input of a TV/monitor.
Component video
Use a 3-core AV cable to connect the
components outputs of this unit to the
corresponding inputs of a TV/monitor.
S-Video
Use an S-Video cable to connect the
S-Video output of this unit to the S-Video input
of a TV/monitor.
6
Connection
SCART
Use a 21-pin SCART cable to connect the
SCART output of this unit to the TV/monitor
SCART input.
The connection you should make
depends on the TV/monitor input terminals.
Don’t make all the connections at the same
time; otherwise the produced picture will be
affected. picture will be affected.
Audio system connection
TV/monitor/amplifier audio input
Speakers
Speakers
2CH audio input
2CH audio output
Coaxial audio
input
Coaxial audio
output
Unit audio output
Two types of audio output systems: analog audio and digital audio. Analog audio includes
2-channel stereo. Digital audio includes optical and coaxial output.
Stereo audio
7
Connection
Use a pair of AV cables (red for right/white
for left) to connect the stereo audio outputs of
this unit to the TV or a stereo input of power
amplifier.
Coaxial digital audio
Use the special coaxial cable to connect the
coaxial output of this unit to the coaxial input of
power amplifier.
Speaker output
Use the specified cable in the accessories to
connect this unit to the input of sound boxes.
The physical connection should accord
to the audio output setup of this unit.
External device connection
Line in
This unit has an extra group of audio input terminals. You can input the analogue stereo audio
signals from extra devices such as DVD, VCD, CD, VCR player, etc. Use the audio cable (red for
right, white for left) to connect the stereo audio output terminals of an extra device to the stereo
input terminals (LINE IN) of this unit. Its corresponding signal source is LINE IN, which can be
available by pressing SOURCE SELECT button.
AV in
This unit has an extra group of video and audio input terminals. You can input the analogue
stereo audio signals and video signals from extra devices such as VCD, VCR, DVD player, etc.
Use the audio cable (red for right, white for left) to connect the stereo audio output terminals of an
external device to the stereo input terminals of this unit (L/R AUDIO IN). Use the cable with yellow
plug of an AV cable to connect the composite video input of this unit (VIDEO IN) to the video
output of an external device. Its corresponding signal source is AV IN, which can be available by
pressing SOURCE SELECT button.
UNIT
UNIT
2-CH AUDIO
OUTPUT
2-CH AUDIO
OUTPUT
VIDEO OUTPUT
8 9
Operation Operation
Control elements
Front panel
1. TFT-display
2. Disc tray
3. IR sensor
4. Headphone out
5. OPEN/CLOSE button
6. STANDBY button
1 2 3 4 5
10
9
8
7
6
11
12
7. PLAY/PAUSE button
8. PREVIOUS button
9. NEXT button
10. VOLUME regulator
11. USB slot
12. SD/MMC/MS card slot
Rear panel
1. S-video output
2. Composite Video output
3. Speaker output
4. Component video output
5. Audio-video input
6. POWER switch
7. FM Antenna in
8. AM Antenna in
9. L/R Audio output
10. Coaxial digital audio output
11. SCART output
12. Line in
13. TV antenna in
1 2 3 4 5 6 7 8
9 10 11 12 13
8 9
Operation Operation
Remote controller (RC)
1. STANDBY button
2. Number buttons
3. GOTO button
4. SETUP button
5. TFT ON/OFF button
6. PROG button
7. SEARCH ( / ) buttons
8. TITLE/COPY/AM/FM button
9. ENTER button/
cursor buttons (
/ / / )
10. AUDIO/MEMORY button
11. CH-LEVEL button
12. S.EFFECT button
13. USB button
14. REPEAT button
15. A-B button
16. OPEN/CLOSE button
17. button
18. button
19. ANGLE button
20. V-MODE button
21. SOURCE SELECT button
22. OSD button
23. СН ( / ) buttons
24. VOL+/VOL- buttons
25. SUBTITLE/AUTO button
26. MENU/RIPPING/MO/ST button
27. TONE button
28. ZOOM button
29. SYSTEM button
30. button
1 16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
2
3
4
5
6
7
8
9
10
11
12
13
14
15
10
Operation
Changing the battery
1. Remove the battery compartment cover
on the back of the RC.
2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• Use two AAA/1.5V batteries for the RC.
The RC should be pointed at remote sensor
within 8 meters and within 30 degrees at the
left or the right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
Button functions
STANDBY
When playing, press STANDBY button,
the unit will be power-off and go to standby
state; Press STANDBY again, the unit will be
switched on and start playing.
Warning: The power is not fully cut off at
standby state. If the unit will not be used for
a long time, turn off the power by pressing
STANDBY button on the front panel.
You can also switch off the unit by
pressing STANDBY switch on the panel.
OPEN/CLOSE
Press OPEN/CLOSE button when power
on, the disc tray is pushed out. Put the disc on
the tray with the title faced up. Press OPEN/
CLOSE again to close the disc tray and the
unit starts playing automatically. (Without auto-
play function for MP3 and JPEG discs).
Number buttons
Press number buttons to input digits
(channel numbers, playback time etc.).
GOTO
Press GOTO button to enter the menu
enabling to select playback start time for the
title, track or chapter, and to set some other
playback parameters.
SETUP
Press SETUP button, the on-screen setup
menu will be display.
(PLAY/PAUSE)
When playing the disc, press PLAY/PAUSE
button on the unit or button on the RC
to pause, press the button again to return to
normal play.
(Mute)
Press button, no sound will be heard
and the mute symbol will display on the TV
screen. Press button again, and the
sound will resume.
TFT ON/OFF
Press this button to switch off the display.
Press again to return to normal picture.
ANGLE
When playing the disc with multi-angle,
press ANGLE button to change view angle.
V-MODE
Press V-MODE button to switch the video
output mode (YUV/RGB/OFF).
PROG
• If the disc has 2 or more tracks, chapters
or titles, set up the playing order to your
preference. Press PROG button to enter
11
Operation
to go to the next track.
TITLE/COPY/AM/FM
• When playing DVD disc, press TITLE/
COPY/AM/FM button to open the title list (for
some units – to open the title menu).
• When playing a file disc, press TITLE/
COPY/AM/FM button to open Copying menu.
• In Radio mode press TITLE/COPY/AM/FM
button to choose band – AM or FM.
SUBTITLE/AUTO
• When playing the disc with multi-subtitle
function, press SUBTITLE/AUTO to select the
subtitle language.
• In Radio receiving mode use this button to
automatically adjust and save all stations with
strong signal.
AUDIO/MEMORY
• When playing DVD with more than one
audio language, press AUDIO/MEMORY
button to select you desired audio language.
• In Radio mode use this button to save the
current station into the unit memory.
MENU/RIPPING/MO/ST
• When playing DVD disc, press MENU/
RIPPING/MO/ST button to open the disc menu.
• When playing CD/HDCD disc, press
MENU/RIPPING/MO/ST button to open
Ripping menu.
• In Radio mode use this button to select the
Mono or Stereo mode.
Cursor buttons
Press cursor buttons for navigation in
various menus.
ENTER
Press ENTER button to confirm input data or
selected options.
S.EFFECT
Press S.EFFECT button to change the
surround sound (DSP 1-6) effect.
program menu.
• Press digit button to input the number of
the track, title or chapter. If the programmed
tracks are over ten, move the cursor to
item and press ENTER button to go on
programming (maximum 20 programmable
items). Use cursor buttons to move the cursor
to the START. Press ENTER button to start
PROGRAM play.
• When playing MP3 disc, programming is
not available.
• To quit the programming menu press
PROG button or move the cursor on EXIT item
and press ENTER button.
OSD
Press the OSD button, the relative
information of the current playback will display
on the screen.
SOURCE SELECT
You can switch among various signal
sources by pressing SOURCE SELECT button.
/
• Press these buttons for fast forward or
fast rewind; with each pressing the speed will
change as follows: Х2 – Х4 – Х8 – Х16 – Х32
- normal.
• In Radio mode press the buttons to search
strong signal stations manually.
VOL+/-
Press VOL+ to adjust volume up. Press
VOL- to adjust volume down. You can also
rotate VOLUME knob to adjust the sound
volume level.
/
• In Radio mode press these buttons for
manual adjustment of stations with strong
signal.
• When playing DVD disc, press to go
to the previous chapter or to go to the
next chapter.
• When playing SVCD, VCD, CD disc, press
to go to the previous track or press
12 13
Operation Operation
CH-LEVEL
Press this button to select left or right channel,
then press VOL buttons to adjust its level.
TONE
Press TONE button to select bass or treble
frequency, then press VOL buttons to change
the volume of the selected frequency.
USB
Insert the USB device into the slot on the
front panel. Press USB button to play content
of the USB device.
SYSTEM
Press SYSTEM button; the display will show
picture setup menu using which you can adjust
contrast, brightness, color, sharpness, display
aspect or to reset your adjustments. Press
SYSTEM button to quit the menu.
ZOOM
• When playing DVD, SVCD, VCD disc, press
ZOOM to zoom in or zoom out the picture.
• In zoom in mode, press cursor to move
the picture for viewing. The picture cannot be
moved in zoom out mode.
REPEAT
Press REPEAT button to repeat a title,
chapter, track or the whole disc.
• When playing DVD disc, press REPEAT
button continually to repeat chapter => title =>
all => repeat off.
• When playing SVCD, VCD, CD disc, press
REPEAT button continually to repeat track =>
all => repeat off.
• When playing MP3 disc, press REPEAT
button continually to play folder => single =>
repeat track => repeat folder.
A - B
• Press A-B button at the start point (A)
and the ending point (B) to select the repeat
fragment.
• Press A-B button the third time to cancel
fragment repeat and return to normal play.
When playing DVD/VCD/SVCD/CD disc,
press button once, the unit will memorize
the previous ending point. Press button
to continue playback. Press button twice;
not playback can only be resumed from the
beginning of the disc.
System setup
1. Press SETUP button to enter the setup
menu. In Setup menu, press SETUP button
again to quit the setup page.
2. Use
/ buttons to choose a setup
page: General setup page, Audio setup
page, Dolby Digital setup, Video setup page,
Preference page, Exit.
3. Press button to enter the setup page
selected.
4. Use / buttons to select the
option you want to adjust.
5. Press
button to enter the adjustment
list. Use / buttons to select the
adjustment and press ENTER button to confirm
and
button to return to options list.
6. To return to setup page list press
button when in the option list.
The items in gray can’t be set up. The
setup is memorized and kept after power is off.
General setup page
General
General setup page
TV display
Angle mark
OSD language
Closed captions
Screen saver
HDCD
Last memory
Audio Dolby Video Preference
12 13
Operation Operation
• TV DISPLAY
4:3 PanScan: When the unit connects to the
normal TV set, the wide-screen image shows
on the full screen, but some part is cut off.
4:3 LetterBox: When the unit connects to the
normal TV set, the wide-screen image shows
and black bars appear on the top and bottom
of screen.
16:9: Use this item when the unit is
connected with the wide screen TV set.
• ANGLE MARK
It will show the angle mark when playing
DVD disc with multi-angle view if selecting On.
• OSD LANGUAGE
Select on-screen display language: English,
Russian.
• CLOSED CAPTIONS
This function doesn’t work when the disc
without caption. If the caption is Off, press
SUBTITLE button on the RC to make caption
on. The default setup is On.
• SCREEN SAVER
If the Screen saver is set On and the unit is
switched on without a disc playing for several
minutes, a moving picture appears on the
screen, and the unit will go to standby mode
after 20 minutes. You can press any button
except STANDBY to wake it up.
• HDCD
You can select the digital filter Off, 1x, 2x.
The initial factory setup is Off.
• LAST MEMORY
When this function is on, the unit can
memorize the time elapsed from the last time
you played the disc. Then at the next playing, it
will resume playing from the memorized time.
Audio setup page
General
Audio setup page
Analog audio
Digital audio
Audio Dolby Video Preference
Analog audio setup page
General
Analog audio setup page
Downmix
Audio Dolby Video Preference
• DOWNMIX
LT/RT: The audio out is Left and Right
channels format even if the original sound is
5.1CH format.
Stereo: The audio out format is stereo even
if the original sound is 5.1CH format.
Digital audio setup
General
Digital audio setup
Digital output
LPCM output
Audio Dolby Video Preference
14
Operation
• DIGITAL OUTPUT
SPDIF/OFF: no digital signal out (coaxial
output off), only analog audio output.
SPDIF/RAW: digital signal output in the
original format recorded in the disc.
SPDIF/PCM: digital signal output in the
decoded PCM form.
• LPCM OUTPUT
Select PCM frequency at 48 kHz or 96 kHz
Some amplifiers don’t support 96 kHz
sampling and cause coaxial output abnormal.
Dolby digital setup
General
Dolby digital setup page
Dual mono
Dynamic
Audio Dolby Video Preference
• DUAL MONO
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left/right output average signal.
• DYNAMIC
If watching large dynamic scope movie
program at night, to select this mode you can
reduce the volume to a very low level, at the
same time, to keep the fine details sounds. In
this case, this doesn’t disturb the family and
keep the quality sounds.
Video setup
General
Video setup page
Video output
Color setting
Audio Dolby Video Preference
• VIDEO OUTPUT
OFF: set video output to the composite.
YUV: set video output in analog component
video format when connecting to Y/U/V terminals.
P-YUV: set video output as progressive YUV
signal if the component video out is used.
RGB: set video output in Red/Green/Blue
format when connecting to SCART terminals.
If the video setting differs with the
physical connection, the TV set may be without
picture. In case of no picture, you can reset the
setting, then keep pressing V-MODE button
until the picture is OK again.
• COLOR SETTING
You can set the Sharpness, Brightness,
Contrast, Gamma, Hue and Saturation
according to your preference.
Preference setup
General
Preference page
TV type
PBC
Audio
Subtitle
Disc menu
Parental
Password
Default
Audio Dolby Video Preference
• TV TYPE
This unit is suitable for all kinds of TV
15
Operation
systems. You can select one of the PAL, NTSC
or Auto.
AUTO: the TV system is auto switched
according to the disc system.
NTSC: this system is used in USA, Taiwan,
Japan etc.
PAL: this system is used in China, Europe,
Hong Kong etc.
• PBC
When playing a VCD disc, select ON to
activate Playback Control (PBC) function (only
for discs encoded with PBC function.
• AUDIO, SUBTITLE, DISC MENU language
These are the initial settings by your
preference. If a setting is supported by disc
content, it will work. Otherwise the disc default
value works. And these settings can be
changed respectively by pressing AUDIO and
SUBTITLE buttons when playing.
• PARENTAL
The control level is for parental to control
playing content and protect your children from
violence and erotic. The disc, the level of which
is higher than the setting level can not be played.
• PASSWORD
Change the password. The initial factory
password is 136900. You can set your own
password. If you forget your own password,
you can use 136900 as general password.
• DEFAULT
Reset to the initial factory setups (except
Parental and Password items).
TV operation
Repeatedly press SOURCE SELECT button
until TV mode is on, then press SYSTEM
button twice to make Setup Menu available.
SLEEP
Select this item, use
/ buttons to
select the option OFF to disable the auto
standby function or select a standby time
(15Min, 30Min, 60Min, 90Min or 120Min) after
which the unit will automatically go into the
standby mode if it is not used.
AUTO SEARCH
Select this item, press
/ buttons to
scan all the available channels automatically;
press button to stop scanning.
MANUAL SEARCH
Select this item, press
/ buttons to
scan another channel manually to replace the
current one; press button to stop scanning.
VIDEO SYSTEM
Select this item; use
/ buttons to
select a preferred video system.
AUDIO SYSTEM
When the item is selected, use
/
buttons to select an preferred audio system.
CHANNEL
In this item, the current channel number is
displayed.
FINE TUNE
This item is used to fine tune the frequency
of the current channel. Select this item,
then press / buttons to fine tune the
frequency.
SKIP
Set this item to ON and the channel will be
skipped over when you search channels by
pressing / . Set this item to OFF to
cancel.
Radio operation
• Please connect FM/AM antenna to the
jacks on rear panel.
• Press SOURCE SELECT button until you
enter Radio system, and press TITLE/COPY/
AM/FM button to choose FM or AM range.
• Manual adjustment. Press /
buttons or / buttons to enable
adjustment of radio stations.
• Automatic adjustment. Press and hold
SUBTITLE/AUTO button, the tuner will
automatically find the radio stations. After
finding the station, the radio frequency will be
16
Operation
1 2
3 4 5
1. Playback info window - shows current
playback time, track number, volume level,
playback status (stop/play/pause) etc.
2. Address window - shows directory address
at which the currently played file is found.
3. Directory window - shows the currently
selected directory.
4. Scroll bar - shows file location in the
directory.
5. Preview window - shows the selected
JPEG file thumbnail.
Use
/ buttons to select the
directory you want and press or ENTER
button to enter it. Select a file and press
or ENTER button to start its playback.
Manufacturer guarantees regular
playback of licensed discs only. Some AVI
files cannot be played due to their parameters
and recording conditions. Video files more
than 2 Gb having AVI extension can be played
partially.
JPEG playback
• While a file playback, press button,
12 thumbnails will be shown on the screen.
• Press cursor buttons to select the desired
picture.
• Use cursor buttons to select SLIDE SHOW
item, then press
or ENTER button to start
slide show.
• Use cursor buttons to select MENU item,
then press
or ENTER button to enter
shown on DVD-player display.
• This unit can memorize 80 radio stations
(FM/AM)
• If you want to save radio station in
memory, you need to choose the memory item
with / buttons. In manual or automatic
mode find the radio station you want to save.
Then press MEMORY/AUDIO button, and after
it input the corresponding number to save the
station.
• Repeat all above-note functions to
memorize other radio stations.
• If you want to listen to a radio station that
you have memorized, press / buttons
and choose the necessary channel.
Various disc operation
MP3/JPEG/MPEG4 background
MP3 - generally adopted standard of audio
compression, compressing audio data to 1/12
of their size. One CD disc may store more than
600 minutes of music (170 songs). And the
quality of MP3 disc approximates to an audio
CD disc quality.
JPEG (Joint Photographic Expert Group) -
image compression algorithm, used all over the
world and providing high level of compression
of the source data. Any graphics editor may
edit images of this format and their size in 15-
20 times less then the original images.
MPEG4 - standard for transmitting audio and
video data via channels with low capacity. This
format is very popular since it made possible
to place full-length movies with good enough
resolution in one CD.
MP3/MPEG4 playback
When a disc or a USB containing files of
these formats is inserted, following interface
will be displayed:
17
Operation
button function menu.
The button function menu is as follows:
Button Function
Entering thumbnail mode
Next picture
Previous picture
To play picture
Rotate 90 degrees
anticlockwise
Rotate 90 degrees clockwise
Select CONTINUE item and press ENTER
button to go to the other menu page:
ZOOM Change zoom mode
Zoom in picture
Zoom out picture
Cursor
buttons
Move zoom center
Select EXIT MENU item and press ENTER
button to exit.
Depending on file volume and encoding,
some delay is possible when changing modes
or passing to the next menu item.
USB/SD/MMC operation
Insert a USB drive in the USB port, then
press USB button to play the readable files
in it. Press USB button again to switch to the
DVD mode.
Insert a SD, MS or a MMC card into the SD/
MMC/MS card slot, then press USB button to
play readable files in it.
Press USB button again to switch to the
DVD mode.
If a USB drive and a memory card are
inserted at the same time, press USB button
once to select USB and press it twice to select
memory card. Press it for the third time to
return to the DVD mode.
SD/MMC up to 4 Gb are supported by this
unit. USB up to 8 Gb is supported.
Ripping
This unit has Ripping function making it
handy and quick to copy audio files (e.g.
music) from CDs. RIPPING is converting from
CDDA format to the compressed MP3 format
onto a USB drive. In the course of copying, ID3
tags are generated automatically in Russian
and English, depending on the source. If the
disc does not contain such information in
CD-text format, ID3 tags will be written as
“Unknown artist” and “Unknown album”.
RIPPING function has a simple and intuitive
menu. To display the Ripping menu, press
MENU/RIPPING button on the RC while CD
playback. A USB-drive should be connected to
the unit.
Create ID3 Yes
For navigation in the menu use cursor
buttons and press ENTER button to confirm
your option. In “Options” column you may
set speed and bit rate for ripping. In “Track”
column you may select tracks for ripping (press
ENTER button to select a highlighted track).
Besides, you can select all tracks (“Select all”)
or cancel your choice (“Select none”). To start
converting process, select “Start” and press
ENTER button.
18
Operation
Summary
After the CD ripping procedure begins, the
system will proceed to the next menu page.
In Ripping window, there are a track
progress bar and a total progress bar showing
how much the ripping procedure for the current
track has been done and how much the total
task has been finished respectively.
During ripping, the option Cancel is
highlighted, so whenever you want to cancel
ripping, just press ENTER button.
The ripped tracks from CD or HDCD discs
will be stored in a folder created automatically
by the system in the connected USB drive. If
the selected track shares the same file name
with the existing one in that folder, the system
will pop up a dialogue box to warn you of that.
Press ENTER button to continue and replace
the existing one with the selected track. Select
option Cancel to quit.
And you can choose to create another folder
in the connected USB drive for ripping this track.
Create a new folder for ripping If you want
to create another folder in the connected USB
drive to save the ripped tracks, you need to
open the disc tray and then close it. The tracks
ripped afterwards will be saved in a newly
created folder.
Copying data
• Play data disc or USB/SD/MMC containing
MP3/JPG/DivX files.
• Press TITLE/COPY button on RC, the
COPY menu will appear with option of ALL
SELECT/ALL UNSEL/COPY/EXIT.
• Move the cursor to the target file or folder,
press ENTER button to tick it, or select ALL
SELECT item to select all the data.
• Move the cursor to COPY item, then press
ENTER button.
• Press ENTER button to display the option
BACK/NEXT.
• Choose NEXT item to start copying data
the selected device.
Deleting data from USB
• Play USB device containing the desired
data.
• Press TITLE/COPY button to get the menu
of ALL SELECT/ALL UNSEL/COPY/DEL/EXIT.
• Move the cursor to the target file or folder,
press ENTER button to tick it, then move to
DEL item and press ENTER button to delete
the data from the device.
19
General information
Handling compact discs
Handling compact discs
• Do not insert anything other than a CD into
the disc tray.
• Do not use cracked, chipped, warped, or
otherwise damaged discs as they may cause
damage to the player.
• Handle the disc only by the edges (as
shown in the picture). To keep discs clean do
not touch its surface.
• Store discs in their cases when not in use.
• Do not expose discs to direct sunlight, high
humidity, high temperature or dust.
• Prolonged exposure to extreme
temperature can wrap a disc.
• Do not attach labels, write on or apply
chemicals to the surface of the discs.
• Do not touch the recorded surface of the
discs.
• Use 12-cm CDs. Use only conventional,
fully circular discs. Do not use irregularly
shaped discs.
Cleaning discs
Fingerprints should be carefully wiped from
the surface of disc with a soft cloth. Unlike
conventional records, compact discs have no
grooves to collect dust and macroscopic dirt,
so gently wiping them with a soft cloth should
remove must panicles. Wipe in a straight
motion from the center to the edge.
Never use thinner benzine, record cleaner
or anti static spray on a compact disc. Such
chemicals can damage its plastic surface.
Accessories
1. Head unit 1 pc
2. Speaker 2 pcs
3. Remote controller 1 pc
4. Audio-video cable 1 pc
5. Speaker cable 1 pc
6. AM antenna 1 pc
7. FM antenna 1 pc
8. Battery AAA 1.5V 2 pcs
9. Consumer information 1 pc
10. Warranty card 1 pc
11. Instruction manual 1 pc
20 21
General information General information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom Cause Solution
No sound Poor audio cable connection Make proper connection
Disc dirty or damaged Clean the disc
MUTE function is on Disable MUTE function
No image Poor video cable connection Make proper connection
Setup doesn’t correspond to the
actual connections
Press and hold V-MODE button until
picture appears
Disc cannot be
read
Disc not inserted Insert the disc
Disc inserted incorrectly Install the disc with the label side
facing up
Condensate on the unit laser head Switch the unit on without disc for an
hour
Remote control
does not operate
Remote control is incorrectly
directed at the unit
Use the remote controller according to
the manual
Distance and angle to the unit are
too large
Decrease the distance and angle
Run out batteries Replace both batteries
No image Incorrect key sequence Repeat the operation one more time
Static voltage on the unit housing Switch the unit off for 1-2 minutes and
then switch it on again
No power Power cord is not connected to
electricity supply network
Insert the power cord securely into the
household socket
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/
