Sony CDX-R3350EE Руководство пользователя

Бренд: Sony

Модель: CDX-R3350EE

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

Это руководство также подходит для

CDX-R33EE

2-515-510-32 (1)

Operating Instructions

Инструкция по эксплуатации

CDX-R3350EE

CDX-R33EE

For installation and connections, see the supplied installation/connections manual.

Перед установкой и подсоединениями прочитайте прилагаемую инструкцию

по установке и подсоединению.

Compact Disc

Player

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy your drive with the

following functions.

• CD playback:

You can play CD-DA (also containing CD

TEXT*), CD-R/CD-RW (MP3 files also

containing Multi Session (page 11)) and

ATRAC CD (ATRAC3 and ATRAC3plus

format (page 12)).

• Radio reception:

–You can store up to 6 stations per band (FM1,

FM2, FM3, AM1 and AM2).

–BTM (Best Tuning Memory) function: the

unit selects strong signal stations and stores

them.

* A CD TEXT disc is a CD-DA that includes

information such as disc, artist and track name.

SonicStage and its logo are trademarks of Sony

Corporation.

ATRAC, ATRAC3, ATRAC3plus and their logos

are trademarks of Sony Corporation.

Type of discs Label on the disc

CD-DA

MP3

ATRAC CD

Warning if your car’s ignition has no

ACC position

After turning the ignition off, be sure to press

and hold (OFF) on the unit until the display

disappears.

Otherwise, the display does not turn off and

this causes battery drain.

This label is located on the bottom of the

chassis.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Table of Contents

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4

DEMO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Detaching the front panel . . . . . . . . . . . . . . . . . 4

Attaching the front panel . . . . . . . . . . . . . . . 4

Inserting the disc in the unit . . . . . . . . . . . . . . . 5

Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 5

Location of controls and basic

operations

Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Card remote commander RM-X151 . . . . . . 6

Display items . . . . . . . . . . . . . . . . . . . . . . . . 8

Repeat and shuffle play . . . . . . . . . . . . . . . . 8

Radio

Storing and receiving stations . . . . . . . . . . . . . . 8

Storing automatically — BTM . . . . . . . . . . 8

Storing manually . . . . . . . . . . . . . . . . . . . . . 8

Receiving the stored stations . . . . . . . . . . . . 8

Tuning automatically . . . . . . . . . . . . . . . . . . 8

Other functions

Changing the sound settings. . . . . . . . . . . . . . . 9

Adjusting the sound characteristics

— BAL/FAD/SUB . . . . . . . . . . . . . . . . . . . 9

Adjusting the equalizer curve — EQ3 . . . . 9

Adjusting setup items — SET . . . . . . . . . . . . . 9

Using optional equipment. . . . . . . . . . . . . . . . 10

Rotary commander RM-X4S . . . . . . . . . . 10

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 11

About MP3 files . . . . . . . . . . . . . . . . . . . . 11

About ATRAC CD . . . . . . . . . . . . . . . . . . 12

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 13

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 14

Error displays/Messages . . . . . . . . . . . . . . 15

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel and press the RESET

button with a pointed object, such as a ballpoint

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold (SEL).

The setup display appears.

2 Press (SEL) repeatedly until “CLOCK-

ADJ” appears.

3 Press (DSPL ) .

The hour indication flashes.

4 Press the volume +/– button to set the

hour and minute.

To move the digital indication, press (DSPL).

5 Press (SEL).

The clock starts and the next setup display

appears.

6 Press and hold (SEL).

The setup is complete.

To display the clock, press (DSPL) . Press

(DSPL) again to return to the previous display.

With the card remote commander

In step 4, to set the hour and minute, press M or m.

DEMO mode

When the unit is turned off, the clock is

displayed first, then demonstration (DEMO)

mode starts the demonstration display.

To cancel the DEMO mode, set “DEMO-OFF”

in setup (page 9) while the unit is turned off.

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press , then pull it off towards you.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Tip

When carrying the front panel, use the supplied front

panel case.

Attaching the front panel

Engage part A of the front panel with part B of

the unit, as illustrated, and push the left side into

position until it clicks.

Note

Do not put anything on the inner surface of the front

panel.

RESET

button

(OFF)

Inserting the disc in the

unit

1 Open the shutter.

2 Insert the disc label side up.

Playback starts.

3 Close the shutter.

Ejecting the disc

Open the shutter.

2 Push down the shutter until it clicks.

The disc is ejected.

Notes

• While ejecting or inserting the disc, do not close the

shutter. The disc may be caught and damaged.

• The disc may be ejected if you open the shutter

forcefully.

Tip

The disc can be played with the shutter opened or

closed.

Click

Location of controls and basic operations

Main unit

Card remote commander RM-X151

ATT OFF

SOURCE MODE

SEL

SEEK

123456

SENS

REP

–

GP/DISC

SHUF

BTMSCRL

DSPL

DIM

EQ3

OPEN

SEEK

12 3 4 5 6 7 8

CDX-R3350EE

CDX-R33EE

9 0 qaqs qd qf qg qh qj qk

OFF

DSPL

SCRL

SEL

SOURCE

MODE

132

465

ATT

VOL

–

Refer to the pages listed for details. The

corresponding buttons on the card remote

commander control the same functions as those

on the unit.

a Volume +/– button

To adjust volume.

b ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

c DSPL (display)/DIM (dimmer) button

4, 8

To change display items (press); change the

display brightness (press and hold).

d OPEN shutter, disc slot (located behind

the shutter) 5

e Display window

f EQ3 (equalizer) button 9

To select an equalizer type (XPLOD,

VOCAL, CLUB, JAZZ, NEWAGE, ROCK,

CUSTOM or OFF).

g OFF button

To power off/stop the source.

h SEEK +/– button

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

CD:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); fast-forward/

reverse a track (press and hold).

i (front panel release) button 4

j SOURCE button

To power on/change the source (Radio/CD).

k MODE button 8

To select the radio band (FM/AM).

l SEL (select) button 4, 9

To select items.

m RESET button (located behind the front

panel) 4

n Number buttons

Radio:

To receive stored stations (press); store

stations (press and hold).

CD:

(1)/(2): GP/DISC –/+

To skip groups (press); skip groups

continuously (press and hold).

(3): REP 8

(4): SHUF 8

o SENS button

To improve weak reception: LOCAL/

MONO.

p SCRL (scroll) button 8

To scroll the display item.

q BTM button 8

To start the BTM function. (press and hold)

r Receptor for the card remote

commander

The following buttons on the card remote

commander have also different buttons/functions

from the unit.

s < (.)/, (>) buttons

To control radio/CD, the same as (SEEK)

+/– on the unit. (For details of other

operations, see “With the card remote

commander” on each pages.)

t VOL (volume) +/– button

To adjust volume.

u M (+)/m (–) buttons

To control CD, the same as (1)/(2) –/+ on

the unit. (For details of other operations, see

“With the card remote commander” on each

pages.)

v Number buttons

To receive stored stations (press); store

stations (press and hold).

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

Tip

For details on how to replace the battery, see

“Replacing the lithium battery of the card remote

commander” on page 12.

Display items

A Source

B Track number/Elapsed playing time,

Disc/artist name, Group number*

Group name, Track name, Text

information*

, Clock

*1 Group number is displayed only when the group is

changed.

*2 When playing an MP3, ID3 tag is displayed and

when playing ATRAC CD, text information written

by SonicStage, etc. is displayed.

To change display items B , press (DSPL);

scroll display items B, press (SCRL) or set

“A.SCRL-ON” (page 9).

Tip

Displayed item will differ, depending on the disc type

and recorded format. For details on MP3, see

page 11; ATRAC CD, see page 12.

Repeat and shuffle play

During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

* When an MP3/ATRAC CD is played.

To return to normal play mode, select “REP-

OFF” or “SHUF-OFF.”

Radio

Storing and receiving

stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3*, AM1 or AM2.

2 Press and hold (BTM) until “BTM”

flashes.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

* FM3 tuning range is 65 to 74 MHz (at 30KHz step).

Storing manually

While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previous stored station will be replaced.

Receiving the stored stations

Select the band, then press a number

button ((1) to (6)).

With the card remote commander

To select preset stations, press M or m.

Tuning automatically

Select the band, then press (SEEK) +/–

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold ( SEEK) +/– to locate the

approximate frequency, then press (SEEK) +/–

repeatedly to fine adjust to the desired frequency

(manual tuning).

Select To play

REP-TRACK track repeatedly.

REP-GP* group repeatedly.

SHUF-GP* group in random order.

SHUF-DISC disc in random order.

Other functions

Changing the sound

settings

Adjusting the sound

characteristics — BAL/FAD/SUB

You can adjust the balance, fader and subwoofer

volume.

1 Press (SEL) repeatedly until “BAL,”

“FAD” or “SUB” appears.

The item changes as follows:

LOW*

t MID*

t HI*

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)*

*1 When EQ3 is activated (page 9).

*2 When the audio output is set to “SUB” (page 9).

“ATT” is displayed at the lowest setting, and can

be adjusted up to 20 steps.

2 Press the volume +/– button

repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2, to adjust the selected item, press <, M, ,,

or m.

Adjusting the equalizer curve

— EQ3

You can adjust and store the equalizer settings

for different tone ranges.

1 Select a source, then press (EQ3)

repeatedly to select the EQ3 type.

2 Press (SEL) repeatedly until “LOW,”

“MID” or “HI” appears.

3 Press the volume +/– button

repeatedly to adjust the selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold (SEL) before the setting is

complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

With the card remote commander

In step 3, to adjust the selected item, press <, M, ,,

or m.

Adjusting setup items

— SET

1 Press and hold (SEL).

The setup display appears.

2 Press (SEL) repeatedly until the

desired item appears.

3 Press the volume +/– button to select

the setting (example “ON” or “OFF”).

4 Press and hold (SEL).

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

With the card remote commander

In step 3, to select the setting, press < or , .

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

CLOCK-ADJ

(Clock Adjust)

(page 4)

BEEP To set “BEEP-ON” (

z) or

“BEEP-OFF.”

SUB/REAR*

To switch the audio output.

–“SUB” (

z): to output to a

subwoofer.

–“REAR”: to output to a

power amplifier.

DIM (Dimmer) To change the brightness of the

display.

–“DIM-ON”: to dim the

display.

–“DIM-OFF” (

z): to

deactivate the dimmer.

DEMO*

(Demonstration)

To set “DEMO-ON” (z) or

“DEMO-OFF” (page 4).

A.SCRL

(Auto Scroll)

To scroll long displayed items

automatically when the group/

track is changed.

–“A.SCRL-ON”: to scroll.

–“A.SCRL-OFF” (

z): to not

scroll.

continue to next page t

*1 When the unit is turned off.

*2 When the audio output is set to “SUB.”

Using optional equipment

Rotary commander RM-X4S

(CDX-R3350EE only)

Attaching the label

Attach the indication label depending on how

you mount the rotary commander.

Location of controls

The corresponding buttons on the rotary

commander control the same functions as those

on this unit.

The following controls on the rotary commander

require a different operation from the unit.

• PRESET/DISC control

To select preset stations; control CD, the same

as (1)/(2) –/+ on the unit (push in and rotate).

• VOL control

The same as the volume +/– button on the unit

(rotate).

• SEEK/AMS control

The same as (SEEK) +/– on the unit (rotate, or

rotate and hold).

Changing the operative direction

The operative direction of the controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

1 While pushing the VOL control, press and

hold (SEL).

LPF*

(Low

Pass Filter)

To select the cut-off frequency

“78HZ,” “125HZ” or “OFF”

(

z).

DSPL

MODE

OFF

ATT

SEL

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET

To increase

To decrease

Additional Information

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power aerial will extend automatically while

the unit is operating.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit

will not operate properly. In such a case, remove

the disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc

magazines when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a parked car or on a

dashboard/rear tray.

• Do not attach labels, or use discs with sticky

ink/residue. Such discs may stop spinning

when used, causing a malfunction, or may ruin

the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from

using such discs:

–Inability to eject a disc (due to a label or

sticker peeling off and jamming the eject

mechanism).

–Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to

heat shrinking of a sticker or label causing a

disc to warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do

not use such discs.

• You cannot play 8 cm CDs.

• Before playing, clean the

discs with a commercially

available cleaning cloth. Wipe

each disc from the centre out.

Do not use solvents such as

benzine, thinner,

commercially available

cleaners, or antistatic spray

intended for analogue discs.

Notes on CD-R/CD-RW discs

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the

condition of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

by some record companies. Please be aware that

among those discs, there are some that do not

conform to the CD standard and may not be

playable by this product.

About MP3 files

MP3, which stands for MPEG-1 Audio Layer-3,

is a music file compression format standard. It

compresses audio CD data to approximately 1/10

of its original size.

• The unit is compatible with the ISO 9660 level

1/level 2 format, Joliet/Romeo in the expansion

format, ID3 tag version 1.0, 1.1, 2.2, 2.3 and

2.4, and Multi Session.

• The maximum number of:

–folders (groups): 150 (including root and

empty folders).

–MP3 files (tracks) and folders contained in a

disc: 300 (if a folder/file names contain many

characters, this number may become less than

300).

–displayable characters for a folder/file name

is 32 (Joliet), or 32/64 (Romeo); ID3 tag is

15/30 characters (1.0, 1.1, 2.2 and 2.3), or 63/

126 characters (2.4).

continue to next page t

Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side with

digital audio material on the other side. However,

since the audio material side does not conform to

the Compact Disc (CD) standard, playback on this

product is not guaranteed.

Playback order of MP3 files

Notes

• Be sure to finalize the disc before using on the unit.

• When naming an MP3 file, be sure to add the file

expansion “.mp3” to the file name.

• If you play a high-bit-rate MP3, such as 320 kbps,

sound may be intermittent.

• During playback of a VBR (variable bit rate) MP3 file

or fast-forward/reverse, elapsed playing time may

not display accurately.

• When the disc is recorded in Multi Session, only the

first track of the first session format is recognized

and played (any other format is skipped). The

priority of the format is CD-DA, ATRAC CD and

MP3.

– When the first track is a CD-DA, only CD-DA of the

first session is played.

– When the first track is not a CD-DA, an ATRAC CD

or MP3 session is played. If the disc has no data in

any of these formats, “NO MUSIC” is displayed.

About ATRAC CD

ATRAC3plus format

ATRAC3, which stands for Adaptive Transform

Acoustic Coding3, is audio compression

technology. It compresses audio CD data to

approximately 1/10 of its original size.

ATRAC3plus, which is an extended format of

ATRAC3, compresses the audio CD data to

approximately 1/20 of its original size. The unit

accepts both ATRAC3 and ATRAC3plus format.

ATRAC CD

ATRAC CD is recorded audio CD data which is

compressed to ATRAC3 or ATRAC3plus format

using authorized software, such as SonicStage

2.0 or later, or SonicStage Simple Burner.

• The maximum number of:

–folders (groups): 255

–files (tracks): 999

• The characters for a folder/file name and text

information written by SonicStage is displayed.

For details on ATRAC CD, see the SonicStage or

SonicStage Simple Burner manual.

Note

Be sure to create the ATRAC CD using authorized

software, such as SonicStage 2.0 or later, or

SonicStage Simple Burner 1.0 or 1.1, which are

supplied with Sony Network products.

If you have any questions or problems

concerning your unit that are not covered in this

manual, consult your nearest Sony dealer.

Maintenance

Replacing the lithium battery of the

card remote commander

Under normal conditions, the battery will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter.

Replace the battery with a new CR2025 lithium

battery. Use of any other battery may present a

risk of fire or explosion.

Notes on the lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse

blows, check the power

connection and replace the

fuse. If the fuse blows again

after replacement, there may

be an internal malfunction. In

such a case, consult your

nearest Sony dealer.

Folder

(group)

MP3 file

(track)

MP3

+ side up

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Fuse (10A)

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front panel

are not clean. In order to prevent this, detach the

front panel (page 4) and clean the connectors

with a cotton swab dipped in alcohol. Do not

apply too much force. Otherwise, the connectors

may be damaged.

Notes

• For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition

switch.

• Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1 Remove the protection collar.

1 Detach the front panel (page 4).

2 Engage the release keys together with the

protection collar.

3 Pull out the release keys to remove the

protection collar.

2 Remove the unit.

1 Insert both release keys simultaneously

until they click.

2 Pull the release keys to unseat the unit.

3 Slide the unit out of the mounting.

Specifications

CD Player section

Signal-to-noise ratio: 120 dB

Frequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

Tuning range:

FM1/FM2: 87.5 – 108.0 MHz (at 50 kHz step)

FM3: 65 – 74 MHz (at 30 kHz step)

Aerial terminal: External aerial connector

Intermediate frequency: 10.7 MHz/450 kHz

Usable sensitivity: 9 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)

Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz

Frequency response: 30 – 15,000 Hz

Tuning range:

531 – 1,602 kHz

Aerial terminal: External aerial connector

Intermediate frequency: 10.7 MHz/450 kHz

Sensitivity: 30 µV

Power amplifier section

Outputs: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohms

Maximum power output: 50 W × 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (sub/rear switchable)

Power aerial relay control terminal

Power amplifier control terminal

Inputs:

Telephone ATT control terminal

Remote controller input terminal

Aerial input terminal

Tone controls:

Low: ±10 dB at 60 Hz (XPLOD)

Mid: ±10 dB at 1 kHz (XPLOD)

High: ±10 dB at 10 kHz (XPLOD)

Main unit Back of the front panel

Orient the release

keys as shown.

Hook facing

inwards.

continue to next page t

Power requirements: 12 V DC car battery

(negative earth)

Dimensions: Approx. 178 × 50 × 179 mm (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 161 mm

(w/h/d)

Mass: Approx. 1.2 kg

Supplied accessories:

Card remote commander: RM-X151

Parts for installation and connections (1 set)

Optional accessory:

Rotary commander RM-X4S (CDX-R3350EE

only)

Design and specifications are subject to change

without notice.

• Lead-free solder is used for soldering certain parts.

(more than 80 %)

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• VOC (Volatile Organic Compound)-free vegetable oil

based ink is used for printing the carton.

• Packaging cushions do not use polystyrene foam.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check

the connection and operating procedures.

General

No power is being supplied to the unit.

• Check the connection. If everything is in order,

check the fuse.

• If the unit is turned off and the display

disappears, it cannot be operated with the

remote commander.

t Turn on the unit.

The power aerial does not extend.

The power aerial does not have a relay box.

No sound.

• The volume is too low.

• The ATT function is activated, or the Telephone

ATT function (when the interface cable of a car

telephone is connected to the ATT lead) is

activated.

• The position of the fader control (FAD) is not

set for a 2-speaker system.

US and foreign patents licensed from Dolby

Laboratories.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and

Thomson.

No beep sound.

• The beep sound is cancelled (page 9).

• An optional power amplifier is connected and

you are not using the built-in amplifier.

The contents of the memory have been

erased.

• The RESET button has been pressed.

t Store again into the memory.

• The power connecting lead or battery has been

disconnected.

• The power connecting lead is not connected

properly.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the

ignition key is switched.

The leads are not matched correctly with the

car’s accessory power connector.

The display disappears from/does not

appear in the display window.

• The dimmer is set “DIM-ON” (page 9).

• The display disappears if you press and hold

(OFF).

t Press and hold (OFF) again until the

display appears.

• The connectors are dirty (page 13).

CD playback

The disc is automatically ejected.

The disc has trouble.

t Check the following:

The disc cannot be loaded.

• Another disc is already loaded.

• The disc has been forcibly inserted upside

down or in the wrong way.

The disc does not playback.

• Defective or dirty disc.

• The CD-Rs/CD-RWs are not for audio use

(page 11).

MP3 files cannot be played back.

The disc is not corresponding to the MP3 format

and version (page 11).

MP3 files take longer to play back than

others.

The following discs take a longer time to start

playback.

–a disc recorded with a complicated tree

structure.

–a disc recorded in Multi Session.

–a disc to which data can be added.

The ATRAC CD cannot play.

• The disc is not created by authorized software,

such as SonicStage or SonicStage Simple

Burner.

• Tracks that are not included in the group cannot

be played.

Error displays/Messages

If these solutions do not help improve the

situation, consult your nearest Sony dealer.

If you take the unit to be repaired because of CD

playback trouble, bring the disc that was used at

the time the problem began.

The display items do not scroll.

• For discs with very many characters, those may

not scroll.

• “A.SCRL” is set to off.

t Set “A.SCRL-ON” (page 9).

The sound skips.

• Installation is not correct.

t Install the unit at an angle of less than 45° in

a sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.

The disc will not eject.

Press the RESET button (page 4).

Radio reception

The stations cannot be received.

The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the power

supply lead of a car’s aerial booster (only when

your car has built-in FM/AM aerial in the rear/

side glass).

• Check the connection of the car aerial.

• The auto aerial will not go up.

t Check the connection of the power aerial

control lead.

• Check the frequency.

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Press (SEN S) until “LOCAL-ON” appears.

t Tuning does not stop at a station:

Press (SENS) repeatedly until “MONO-

ON” or “MONO-OFF” (FM), or “LOCAL-

OFF” (AM) appears.

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication

flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

t Press (SENS) to set the monaural reception

mode to “MONO-ON.”

An FM programme broadcast in stereo is

heard in monaural.

The unit is in monaural reception mode.

t Press (SENS) until “MONO-OFF” appears.

ERROR

• The disc is dirty or inserted upside down.

t Clean or insert the disc correctly.

• The disc cannot play because of some problem.

t Insert another disc.

FAILURE

The speaker/amplifier connection is incorrect.

t See the supplied installation/connections

manual to check the connection.

L.SEEK +/–

The local seek mode is on during automatic

tuning.

NO ID3

ID3 tag information is not written in the MP3

file.

NO INFO

Text information is not written in the ATRAC3/

ATRAC3plus file.

NO MUSIC

The disc is not a music file.

t Insert a music CD.

NO NAME

A track/group/disc name is not written in the

track.

OFFSET

There may be an internal malfunction.

t Check the connection. If the error indication

remains on in the display, consult your

nearest Sony dealer.

READ

The unit is reading all track and group

information on the disc.

t Wait until reading is complete and playback

starts automatically. Depending on the disc

structure, it may take more than a minute.

RESET

The unit cannot be operated because of some

problem.

t Press the RESET button (page 4).

“” or “”

During fast-forward or reverse, you have reached

the beginning or the end of the disc and you

cannot go any further.

“”

The character cannot be displayed with the unit.

Поздравляем с

покупкой!

Благодарим Вас за то, что Вы остановили

свой выбор на проигрывателе компакт-

дисков Sony. В поездке Вы сможете

использовать следующие функции

проигрывателя.

• Воспроизведение компакт-дисков.

Можно воспроизводить диски CD-DA

(содержащие также CD TEXT*), CD-R/

CD-RW (с файлами MP3 и диски в

формате Multi Session (стр. 13 )), а также

диски ATRAC CD (форматы ATRAC3 и

ATRAC3plus (стр. 13 )).

• Прием радиопрограмм.

– Можно хранить в памяти до 6 станций в

каждом диапазоне (FM1, FM2, FM3,

AM1 и AM2).

– Функция BTM (Память оптимальной

настройки): устройство выбирает

радиостанции с наиболее сильным

сигналом и сохраняет их в памяти.

* Компакт-диск с CD TEXT - это компакт-диск CD-

DA, содержащий такую информацию, как

название компакт-диска, имя исполнителя и

названия композиций.

SonicStage и ее логотип являются

товарными знаками корпорации Sony.

ATRAC, ATRAC3, ATRAC3plus и их

логотипы являются товарными знаками

корпорации Sony.

Тип диска Метка на компакт-диске

CD-DA

MP3

ATRAC C D

Проигрыватель компакт-

дисков с диапазоном FM/AM

Сдепано в Таиланде

Содержание

Начало работы

Сброс параметров устройства . . . . . . . . . . 4

Установка часов . . . . . . . . . . . . . . . . . . . . . . 4

Режим DEMO . . . . . . . . . . . . . . . . . . . . . . . . 4

Снятие передней панели . . . . . . . . . . . . . . . 4

Установка передней панели . . . . . . . . . 5

Установка компакт-диска в

устройство. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Извлечение компакт-диска . . . . . . . . . . 5

Расположение органов

управления и основные

операции

Основное устройство . . . . . . . . . . . . . . . 6

Пульт дистанционного управления

RM-X151 . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Компакт-диск

Индикация на дисплее . . . . . . . . . . . . . . 8

Повторное и перетасованное

воспроизведение . . . . . . . . . . . . . . . . . . . 8

Радиоприемник

Сохранение и прием радиостанций . . . . . . 8

Автоматическое сохранение — BTM

(Память оптимальной настройки) . . . . 8

Сохранение вручную . . . . . . . . . . . . . . . 8

Прием радиостанций, сохраненных в

памяти . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Автоматическая настройка . . . . . . . . . . 9

Другие функции

Изменение настроек звука . . . . . . . . . . . . . 9

Подстройка характеристик звука

— BAL/FAD/SUB . . . . . . . . . . . . . . . . . . 9

Настройка кривой эквалайзера

— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Настройка параметров установки

— SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Использование дополнительного

оборудования. . . . . . . . . . . . . . . . . . . . . . . . 11

Поворотный дистанционный

переключатель RM-X4S . . . . . . . . . . . 11

Дополнительная информация

Меры предосторожности . . . . . . . . . . . . . 12

Примечания относительно

компакт-дисков . . . . . . . . . . . . . . . . . . . 12

О файлах MP3 . . . . . . . . . . . . . . . . . . . . 13

О компакт-дисках ATRAC CD . . . . . 13

Уход за устройством . . . . . . . . . . . . . . . . . 14

Извлечение устройства . . . . . . . . . . . . . . . 15

Технические характеристики. . . . . . . . . . 15

Поиск и устранение неисправностей . . . 16

Индикация/сообщения об

ошибках . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Начало работы

Сброс параметров

устройства

Перед первым включением устройства

или после замены автомобильного

аккумулятора, а также после изменения

схемы подключения следует сбросить

параметры устройства.

Снимите переднюю панель и нажмите

кнопку RESET с помощью заостренного

предмета, например шариковой ручки.

Примечание

При нажатии кнопки RESET выполняется

стирание установок времени и некоторых других

занесенных в память параметров.

Установка часов

Часы данного устройства имеют

24-часовую индикацию.

1 Нажмите и удерживайте кнопку

(SEL).

Отобразится дисплей установок.

2 Нажимайте кнопку (SEL), пока не

появится индикация “CLOCK-ADJ”.

3 Нажмите кнопку (DSPL).

Начнет мигать индикация часа.

4 Нажмите кнопку регулировки

громкости +/– для установки

значений часа и минут.

Чтобы переместить индикацию,

нажмите кнопку (DSPL).

5 Нажмите кнопку (SEL).

Часы начнут отсчет времени, и

появится следующий дисплей

установок.

6 Нажмите и удерживайте кнопку

(SEL).

Установка завершена.

Чтобы отобразить часы, нажмите кнопку

(DSPL). Нажмите кнопку (DSPL) еще раз,

чтобы вернуться к предыдущей индикации

дисплея.

При использовании пульта дистанционного

управления

Для установки значений часа и минут в шаге

4 нажмите кнопку M или m.

Режим DEMO

При выключении устройства сначала

отобразится индикация времени, а затем

на дисплее появится демонстрационное

изображение (режим демонстрации

(DEMO)).

Для отмены режима DEMO выключите

устройство и выберите в установках

(стр. 10) параметр “DEMO-OFF”.

Снятие передней

панели

Во избежание кражи устройства можно

снять с него переднюю панель.

Предупреждающий сигнал

Если до поворота ключа зажигания в

положение OFF с устройства не была

снята передняя панель, то в течение

нескольких секунд будет слышен

предупредительный звуковой сигнал.

Звуковой сигнал будет слышен только в

том случае, если используется встроенный

усилитель.

1 Нажмите кнопку (OFF).

Устройство выключится.

2 Нажмите кнопку , затем снимите

панель, потянув ее на себя.

Примечания

• Старайтесь не ронять переднюю панель. Не

надавливайте слишком сильно на переднюю

панель и окошко дисплея.

• Не подвергайте переднюю панель воздействию

тепла/высокой температуры или влажности.

Старайтесь не оставлять его в припаркованной

машине или на приборной доске/полочке за

задним сиденьем.

Совет

При переноске передней панели поместите ее в

прилагаемый специальный футляр.

Кнопка

RESET

(OFF)

Установка передней панели

Прикрепите часть A передней панели к

части B устройства, как показано на

рисунке, и установите левую сторону на

место до щелчка.

Примечание

Не ставьте ничего на внутреннюю поверхность

передней панели.

Установка компакт-

диска в устройство

1 Откройте заслонку.

2 Вставьте компакт-диск этикеткой

вверх.

Начнется воспроизведение.

3 Закройте заслонку.

Извлечение компакт-диска

Откройте заслонку.

2 Нажмите на заслонку до

возникновения щелчка.

Компакт-диск будет извлечен.

Примечания

• Не закрывайте заслонку при установке или

извлечении компакт-диска. Компакт-диск может

застрять и получить повреждения.

• Если при открытии заслонки прилагать

чрезмерные усилия, компакт-диск может быть

извлечен автоматически.

Совет

Компакт-диск можно воспроизводить как при

закрытой, так и при открытой заслонке.

Щелчок

Расположение органов управления и основные операции

Основное устройство

Пульт дистанционного управления RM-X151

ATT OFF

SOURCE MODE

SEL

SEEK

123456

SENS

REP

–

GP/DISC

SHUF

BTMSCRL

DSPL

DIM

EQ3

OPEN

SEEK

12 3 4 5 6 7 8

CDX-R3350EE

CDX-R33EE

9 0 qaqs qd qf qg qh qj qk

OFF

DSPL

SCRL

SEL

SOURCE

MODE

132

465

ATT

VOL

–

Страница загружается ...

Sony CDX-R3350EE Руководство пользователя

Бренд: Sony

Модель: CDX-R3350EE

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

Это руководство также подходит для

CDX-R33EE

Скачать PDF

сообщить о нарушении

на других языках

English: Sony CDX-R3350EE User manual

Sony CDX-R3350EE Руководство пользователя

Это руководство также подходит для

Sony CDX-R3350EE Руководство пользователя

на других языках

Похожие модели бренда