Samsung SR20M7070WD Инструкция по применению
- Категория
- Камины
- Тип
- Инструкция по применению
Это руководство также подходит для
DJ68-00763Q-09
POWERbot
Quick reference guide
SR10M70****, SR20M70**** Series
• Before operating this unit, please read the instructions carefully.
• For indoor use only.
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 1 2020-01-13 오후 10:45:31
English-2
Parts list
1
Main
body
Basic
Parts
Remote
controller
Docking
Station
Batteries
(AAA type) (Optional)
Quick reference guide Spare lter (Optional)
Accessories may
differ depending
on the models.
Power cord Battery Charger Boundary markers
(Optional)
[A Type] [B Type] [C Type] [D Type]
(Not included with
SR10M701*** Series)
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 2 2020-01-13 오후 10:45:34
English-3
Safety information
2-1
• Before operating the appliance, please
read this manual thoroughly and retain it
for your reference.
• Because these following operating
instructions cover various models, the
characteristics of your vacuum cleaner
may differ slightly from those described
in this manual.
Caution/Warning symbols used
WARNING
Indicates that a danger of death or serious
injury exists.
CAUTION
Indicates that a risk of personal injury or
material damage exists.
Other symbols used
NOTE
Indicates that the following text contains
additional important information.
Important safety instructions
When using an electrical appliance, basic
precautions should be observed, including
the following:
Read all instrucrions before using your
robot vacuum cleaner.
Unplug the battery charger / docking
station from outlet when not in use and
before conducting maintenance.
WARNING
To reduce the risk of re, electric shock,
or injury:
General
• Use only as described in this manual.
• Do not operate POWERbot or the battery
charger / docking station if it has been
damaged in any way.
• If the vacuum cleaner is not working as it
should, has been dropped, damaged, left
outdoors, or dropped in water, return it
to a customer care center.
• Do not handle the battery charger /
docking station or POWERbot with wet
hands.
• Use only on dry, indoor surfaces.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety. Cleaning and
user maintenance shall not be made by
children without supervision.
• If the supply cord is damaged, it must
be replaced by the manufacturer or its
service agent or a similarly qualied
person in order to avoid a hazard.
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 3 2020-01-13 오후 10:45:35
English-4
Safety information
2-2
Battery charger / Docking station
• Do not modify the polarized plug to t a
non-polarized outlet or extension cord.
• Do not use outdoors or on wet surfaces.
• Unplug the battery charger / docking
station from the outlet when not in use
and before servicing.
• Use only the battery charger / docking
station supplied by the manufacturer to
recharge.
• Do not use with a damaged cord or plug
or a loose power outlet.
• Do not pull or carry by the cord, use the
cord as a handle, close the door on the
cord, or pull the cord around sharp edges
or corners. Keep the cord away from
heated surfaces.
• Do not use extension cords or outlets with
inadequate current carrying capacity.
• Do not unplug by pulling on the cord. To
unplug, grasp the plug, not the cord.
• Do not mutilate or incinerate batteries as
they will explode at high temperatures.
• Do not attempt to open the battery
charger / docking station. Repairs
should only be carried out by a qualied
customer care center.
• Do not expose the battery charger /
docking station to high temperatures or
allow moisture or humidity of any kind
to come into contact with the battery
charger / docking station.
• Do not charge the non-rechargeable
batteries with charger.
POWERbot
• Do not pick up hard or sharp objects such
as glass, nails, screws, coins, and etc.
• Do not use without a lter in place. When
servicing the unit, never put ngers or
other objects into the fan chamber in case
the unit accidentally turns on.
• Do not put any objects into openings.
Do not use with any openings blocked;
keep openings free of dust, lint, hair, and
anything that may reduce air ow.
• Do not pick up toxic materials (chlorine
bleach, ammonia, drain cleaner, etc.).
• Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or
hot ashes.
• Do not use to pick up ammable or
combustible liquids such as gasoline or
use in areas where they may be present.
Also do not use in:
– Locations with candles or desk lamps on
the oor.
– Locations with unattended res (re or
embers).
– Locations with distilled alcohol, thinner,
ashtrays with burning cigarettes, etc.
• Do not use POWERbot in an enclosed
space lled with vapours given off by oil
based paint, paint thinner, moth proong
substances, ammable dust, or other
explosive or toxic vapours.
• Leaks from battery cells can occur under
extreme usage or temperature conditions.
If the liquid gets on skin, wash quickly
with water. If the liquid gets into the
eyes, ush them immediately with clean
water for a minimum of 10 minutes. Seek
medical attention.
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 4 2020-01-13 오후 10:45:35
English-5
Safety information
2-3
WARNING
Power related
• Please prevent any risk of electric shock
or re.
– Do not damage the power cord.
– Do not pull the power cord too hard or
touch the power plug with wet hands.
– Do not use a power source other than
100-240V~ and also do not use a multi
outlet to supply power to number of
devices at the same time. (Do not leave
the cord carelessly on the oor.)
– Do not use a damaged power plug,
power cord or loose power outlet.
• Clean dust or any foreign matters on the
pin and contact part of the power plug.
– There is a risk of electric shock or
malfunction.
Before use
• Do not use POWERbot near a heater or
combustible materials.
– Do not use powerbot near re or ame
such as a movable heater, a candlelight,
a desk lamp, a replace etc. or in a place
where combustible materials such as
gasoline, alcohol, thinner etc. exist.
• Make sure there are no dangerous objects
around the POWERbot’s cleaning area to
prevent collision and unplug any electric
heaters or fans.
• The POWERbot is intended for household
use therefore do not use it in an attic,
basement, storage, industrial building,
out of indoor space, places with moisture
(such as bathroom, laundry), on the table
or shelves.
– The POWERbot can be damaged or
malfunction.
• Be sure POWERbot does not pass through
or touch any kind of liquids.
– The POWERbot can be severely
damaged and it may contaminate other
areas if the wheels pass through liquid.
• Attach the boundary markers on a place
where the POWERbot may fall such as
a stair or banister to prevent product
damage and injury.
– Please keep the cliff sensor clean all the
time for safety.
• Do not spill any liquids on the docking
station.
– There is a risk of re or electric shock.
• Do not use the battery charger / docking
station for anything other than its
intended purpose.
– There is a risk of re or severe damage
to the docking station.
• Always keep the cliff sensor clean for
your safety.
In use
• If any abnormal sounds, smells or smoke
come from POWERbot, immediately shut
off the emergency switch at the bottom of
POWERbot and contact a service center.
Cleaning and maintenance
• When power cord is damaged, contact
a service center to get it replaced by
certied repairman.
– There is a risk of re or electric shock.
• Please check with a Samsung Electronics
service center when exchanging batteries.
– Using batteries from other products can
cause malfunction.
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 5 2020-01-13 오후 10:45:35
English-6
Safety information
2-4
CAUTION
Before use
• Insert the dustbin before using
POWERbot.
• Be careful with the followings for proper
automatic recharging.
– Always turn on the power of the
docking station.
– Install the docking station where the
POWERbot can nd it easily.
– Do not leave any object in front of the
docking station.
• When installing the docking station, do
not leave the cord carelessly on the oor
since POWERbot may get tangled by it.
• Do not use POWERbot on black colored
oors.
– The POWERbot may not be able to
operate normally.
• Do not pick up POWERbot by the dustbin
holder.
• Do not place any objects within 0.5 m
to both sides and 1 m to the front of the
docking station.
• Make sure the docking station’s charging
contact is not damaged or have any
foreign matters on it.
• Do not install the docking station in an
area with a dark oor.
– If the oor around the docking station is
dark, recharging is hindered.
• Move any obstacles that may disturb
POWERbot’s movement (such as children’s
indoor swing or slides) before cleaning.
• Do not use the POWERbot in a place
which is narrower than the turning radius
(0.5 m or less) of the POWERbot.
• To clean all areas of your house, open all
rooms and attach the boundary markers
on the places where the POWERbot
may get damaged such as a front door,
veranda, bathroom, and stairs for safety.
• For the very low areas where the
POWERbot may get stuck, attach the
boundary markers to prevent the
POWERbot from getting in.
• If a brush or brush cover is not assembled
correctly, scratches may occur on the
oor, or product malfunction may occur.
• Before operating the POWERbot, remove
the objects which could break such as a
frame, mirror, and porcelain items so that
the POWERbot works without interruption.
In use
• Using POWERbot on thick carpet may
damage both POWERbot and the carpet.
– The POWERbot cannot pass over carpet
that is thicker than 1 cm.
• Do not use POWERbot on tables or other
high surfaces.
– There is a risk of damage if it falls.
• The POWERbot may bump into chair, desk
legs therefore move them away for faster
and efcient cleaning.
• When POWERbot is operating, do not lift
it up or carry it to another area.
• Do not hold by driving wheels of POWERbot
when carrying it to another area.
• Do not put any objects on top of
POWERbot since it may cause malfunction.
• Remove any large papers or plastic bags
immediately when using POWERbot since
they may block the intake.
• Do not aim the red pointer directly at
people or animals.
• Do not lie down around the POWERBOT
that is running.
– Your hair may be caught in the brush,
resulting in physical injury.
Cleaning and maintenance
• Prevent any damage to POWERbot by
complying the followings.
– Do not clean POWERbot by spraying
water directly onto it or use benzene,
thinner, acetone or alcohol to clean it.
• Do not disassemble or repair POWERbot.
This should only be done by a certied
repairman.
• Always keep the obstacle sensor and cliff
sensor clean.
– If foreign matter accumulates, sensors
may malfunction.
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 6 2020-01-13 오후 10:45:36
English-7
3
Charging
Please install the docking station in a place
where the oor is level and wall is straight.
How to turn on the emergency
switch
Hold the robot vacuum cleaner and turn
on the emergency switch without pressing
any buttons.
Check the charging status.
For SR10M701*** Series,
The battery indicator blinks at 1 sec.
intervals during charging and the
indicator will remain in ON status
when fully charged.
For SR10M702***/ SR10M703***/
SR20M70**** Series, " " will
turn on according to charging
progress and "FULL" will turn on
when charging is complete.
When the product is purchased, the battery is not charged, so charging must initially be done manually.
0.5 m
1 m
0.5 m
Make sure the
charge pins on the
robot vacuum cleaner
and the charger are
aligned.
Ensure the power
cord is arranged
neatly next to the
wall.
Ú Install with the grain of wood oors.
Install the charger where the
robot vacuum cleaner can
easily nd it.
<SR10M702*** / SR10M703*** /
SR20M70**** Series>
<SR10M701*** Series>
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 7 2020-01-13 오후 10:45:38
English-8
4-1
Using the robot vacuum cleaner
Starting Auto clean mode
The POWERbot moves and
automatically cleans the set areas
only once.
SR10M701*** series : cleans
repeatedly until the battery is
depleted.
Stop cleaning:
Press and release the button
Starting Spot clean mode
Press and release this button.
The POWERbot cleans a localized
area intensely.
Recharging
You can command POWERbot to
recharge at the docking station
automatically while it is cleaning
by pressing this button.
Auto Clean Spot Clean Repeat clean
Manual Clean
Manual clean mode
can be selected by the
direction control buttons
of the remote controller.
Press the [A,B type
],
[C,D type ] on the
remote controller rst and
then press the [Start/Stop
].
<SR10M701*** series> <SR10M702*** / SR10M703*** series>
<SR10M702*** /
SR10M703*** /
SR20M70**** series>
<SR10M701*** series>
<SR10M702*** /
SR10M703*** /
SR20M70**** series>
<SR10M701*** series>
<SR10M702*** /
SR10M703*** /
SR20M70**** series>
<SR10M702*** /
SR10M703*** /
SR20M70**** series>
<SR20M70**** series>
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 8 2020-01-13 오후 10:45:42
English-9
1. Power
Turn POWERbot's power on/off
2. Recharging
Select to recharge POWERbot at the docking station
automatically
3. Start/Stop
Select to start or stop cleaning process
4. Auto clean
Select to clean all set areas only once and then
automatically return to the docking station.
5. Spot clean
Select to clean a localized area intensely
6. Repeat clean
Select to clean repeatedly until the battery becomes
very low with indicator blinking
7. Turbo mode
Select to clean with the strongest suction power
8. Normal mode
Select to clean with moderate suction power
9. Quiet mode
Select to clean with lower operation noise
10. Sound
Each time you press this button, Sound Effects Mute
is selected in this sequence
<SR10M703**9 series only>
Star wars Sound Effects Mute
11. Schedule / Cancel(3sec)
Refer to page 10
12. Clock
Refer to page 10
13. Remote control
Select to turn Wi-Fi function on or off
SR10M701**5 series only : Star wars(Mute function is
not available.)
Using the robot vacuum cleaner
4-2
[A Type] [B Type] [C Type] [D Type]
2 2 2 2
5
11
6
8
12
10
7
6
8
12
10
7
13
5
11
5
9
11
6
8
12
10
7
6
8
12
10
7
13
5
9
11
3 3
3 3
4 4
4 4
1 1 1 1
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 9 2020-01-13 오후 10:45:43
English-10
Setting time/schedule
Only Auto clean mode can be scheduled.
5-1
Setting the time
You must set the current time before using the One-time/daily schedule.
Setting complete
Start setting Select "Hour" Select "Minute"
Select "AM/PM"
Skip to previous, next
setting
Setting the schedule
Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.
Start setting
Setting complete Select "AM/PM" Select "Minute"
Select "One-time" or
"Daily" schedule
Select "Hour"
Skip to previous, next setting
[A Type, B Type]
[A Type, B Type]
Setting complete
Start setting Select "Hour" Select "Minute"
Select "AM/PM"
Skip to previous,
next setting
[C Type, D Type]
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 10 2020-01-13 오후 10:45:45
English-11
Setting time/schedule
Only Auto clean mode can be scheduled.
5-2
Cancelling during setup
Setting will be canceled automatically when there's no input for
7seconds
Cancelling One-time/Daily schedule
When both One-time/
Daily schedule are set
or or
or
or
Press for 3 sec. Select the schedule Cancel complete
When either One-time
or Daily schedule is set
or
Press for 3 sec.
Start setting
Setting complete Select "AM/PM" Select "Minute"
Select "One-time" or
"Daily" schedule
Select "Hour"
Skip to previous, next setting
[C Type, D Type]
[SR10M701*** series]
For the models which do not include a remote controller, schedule setting is available as below.
Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.
Press for 3 sec.
When the schedule LED is turned on,
Daily schedule is set.
Cancelling daily schedule
When a daily schedule
is set
Press for 3 sec.
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 11 2020-01-13 오후 10:45:50
English-12
Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
6-1
Dustbin
1
Press the button to
remove the dustbin
2
Remove the dustbin
cover
3
Remove dust in the
dustbin and cyclone
unit
'Click'
4
Detach the cyclone unit
from the dustbin cover,
and then wash the
dustbin and the lter
5
Reassemble the dustbin
6
Reinsert the dustbin
into the main body until
it clicks
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 12 2020-01-13 오후 10:45:53
English-13
Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
6-2
Brush and Auto shutter tool
Brush design may differ depending on the model. Do not clean the brush with water.
1
Remove the
brush cover
2
Remove the
brush
3
Clean the brush
4
Clean the auto
shutter tool
5
Reassemble the brush
6
Reassemble the brush cover
If a brush or brush cover is not assembled correctly after the maintenance work, scratches may occur on the
oor, or product malfunction may occur. Therefore, assemble them correctly by referring to the cleaning and
maintaining section of a user manual.
Information codes
[SR10M701*** series]
Refer to the user manual for steps to take for each information code on the display panel.
Information codes
Information codes animation
[SR10M702***, SR10M703***, SR20M70**** series]
Refer to the user manual for steps to take for each Information code with mark on the display panel.
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 13 2020-01-13 오후 10:46:01
English-14
Downloading the SmartThings App
f Download and install the SmartThings app from the markets (Google Play Store, Apple App Store, or
Samsung Galaxy Apps). To nd the app, use the keyword “SmartThings”.
NOTE
f SmartThings is incompatible with tablets and some mobile devices.
– Android 6.0 or later (at least 2GB of RAM) is recommended.
f iPad and some mobile devices may not be supported.
– iOS 10.0 or later / iPhone 6 or later is supported.
f Visit Play Store or App Store to see if your mobile device is compatible with SmartThings.
f The supported features are subject to change without any prior notice.
Setting up a Samsung account
f You must sign in to a Samsung account before using the SmartThings app.
f To set up a Samsung account, you can follow the directions provided by the SmartThings app.
f Or, if you have a Samsung smartphone, you can add your Samsung account in the setting app of your
smartphone. Then, it will automatically sign in to your Samsung account.
NOTE
f If you cannot complete the product registration, please take the following steps.
– Try the registration procedure again as you have directed by the pop-up messages.
– Conrm that the UPnP option of your wireless router is active, and then try the registration procedure again.
– Conrm that your wireless router is operating in wireless mode, and then try the registration procedure again.
– If you have two or more POWERbots, turn off the other POWERbots, and then try to register your POWERbot
again.
– If there is any other wireless router that has the same SSID as your wireless router, the registration might be
failed.
f Remote control and Wi-Fi indicator
On Remote control is blocked. (The remote controller can still be allowed.)
Off Remote control is allowed.
On The POWERbot is connected to the wireless router.
Off The POWERbot is trying to connect the wireless router.
Wi-Fi
Frequency range 2412 - 2472 MHz
Transmitter power(Max) 20 dBm
SmartThings App
The SmartThings App is only compatible with models that have a Wi-Fi
function.
7
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 14 2020-01-13 오후 10:46:03
English-15
Memo
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 15 2020-01-13 오후 10:46:03
1_VR7000_Q_guide_EN_00763Q-09_ML.indd 16 2020-01-13 오후 10:46:03
POWERbot
Краткое руководство пользователя
Серия SR10M70****, SR20M70****
•
•
2_VR7000_Q_guide_RU_00763Q-09_ML.indd 1 2020-01-13 오후 10:45:32
Комплектация
1
Пылесос
Основные
компоненты
Пульт ДУ
Док-
станция
Батареи
(тип AAA) (дополнительная
принадлежность)
Краткое руководство
пользователя
Запасной фильтр
(дополнительная
принадлежность)
Кабель питания Зарядное устройство Маркеры границ
(дополнительная
принадлежность)
2_VR7000_Q_guide_RU_00763Q-09_ML.indd 2 2020-01-13 오후 10:45:35
Меры предосторожности
2-1
•
•
ИСПОЛЬЗУЕМЫЕ ПРЕДОСТЕРЕГАЮЩИЕ/
ПРЕДУПРЕЖДАЮЩИЕ СИМВОЛЫ
ПРЕДУПРЕЖДЕНИЕ
ВНИМАНИЕ
ДРУГИЕ ИСПОЛЬЗУЕМЫЕ СИМВОЛЫ
ПРИМЕЧАНИЕ
Важные инструкции по технике безопасности
ПЕРЕД ИСПОЛЬЗОВАНИЕМ ПЫЛЕСОСА POWERbot
ОЗНАКОМЬТЕСЬ СО ВСЕМИ ИНСТРУКЦИЯМИ.
ПРЕДУПРЕЖДЕНИЕ
ОБЩИЕ СВЕДЕНИЯ
•
•
•
•
•
•
•
2_VR7000_Q_guide_RU_00763Q-09_ML.indd 3 2020-01-13 오후 10:45:35
Меры предосторожности
2-2
Зарядное устройство/док-станция
•
•
•
•
•
•
•
•
•
•
•
•
POWERbot
•
•
•
•
•
•
–
–
–
•
•
2_VR7000_Q_guide_RU_00763Q-09_ML.indd 4 2020-01-13 오후 10:45:36
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
Страница загружается ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
Samsung SR20M7070WD Инструкция по применению
- Категория
- Камины
- Тип
- Инструкция по применению
- Это руководство также подходит для
Задайте вопрос, и я найду ответ в документе
Поиск информации в документе стал проще с помощью ИИ
Похожие модели бренда
-
Samsung SR10M7030WW Руководство пользователя
-
Samsung SR20K9350WK Инструкция по применению
-
Samsung SR20M7050US Инструкция по применению
-
-
-
-
Samsung VR10M703PW9 Инструкция по применению
-
-
-
