Hyundai H-CMD4024 Руководство пользователя

Бренд: Hyundai

Модель: H-CMD4024

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

Это руководство также подходит для

МУЛЬТИМЕДИЙНЫЙ

DVD/CD/MP3-РЕСИВЕР

СО ВСТРОЕННЫМ

3.5” TFT-ДИСПЛЕЕМ

MULTIMEDIA DVD/CD/MP3

RECEIVER WITH BUILT-IN

3.5” TFT DISPLAY

Руководство по эксплуатации Instruction manual

H-CMD4026

2 3

Table of contents Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation/Connection

Installation

General notes

Din Front/Rear-Mount

1. DIN front-mount (Method A)

Dismantling the unit

Trim frame installation

2. DIN rear-mount (Method B)

Detachable control panel

Anti-theft system

Connection

Connection diagram

ISO connection table

Using the ISO connector

Parking wire connection

Operation

Control elements

Front panel

Inner panel

Remote controller

Changing battery

General operations

Reset the unit

Turning the unit on/off

Mode selection

Mute function

Volume control

Setting the sound characteristics

System setup

Subwoofer

AV in jack

Radio operations

Band selection

Manual/Automatic tuning

Programming stations

Auto memory store/preset scan

Stereo/mono reception

On-screen display

RDS background

AF (Alternative Frequencies) function

TA (Traffic Alarm)/TP function

PTY (Program Type)

Other functions

Disc/USB/SD/MMC operations

USB/SD/MMC notes

Insert/Eject disc

Inserting a memory card/USB device

Play/pause

MP3/DivX/JPEG file playback

Stop playback

Selecting tracks

Fast forward/rewind

A-B segment repeat

Repeat playback

Intro playback

Goto

Random playback

Programming playback

OSD function

Zooming in/out

PBC function

Changing angle

Selecting audio language

Selecting subtitle language

Selecting sound channel

Menu navigation

ID3 tag information

System setup

Language setup

Audio setup

Video setup

Digital setup

General information

Handling compact discs

Cleaning discs

Cleaning the unit body

Accessories

Troubleshooting guide

Specification

2 3

Table of contents Table of contents

Before you start

If you want to dispose this product, do not mix it with general household waste. There is

a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you

will ensure that your disposed product undergoes the necessary treatment, recovery and

recycling and thus prevent potential negative effects on the environment and human health.

Utilization of the product

Important safeguards

• Read carefully through the manual to

familiarize yourself with this unit.

• Keep this manual handy as a reference

for operating procedures and precautions. Do

not allow persons who have not read through

this manual to use this unit.

• “CLASS 1 LASER PRODUCT”

This product contains a laser diode of

higher class than 1. Laser beams from the

optical pickup are dangerous to the eyes. To

ensure continued safety, do not remove any

covers or attempt to gain access to the inside

of the product. Refer all servicing to qualified

personnel.

• Do not allow this unit to come into contact

with liquids. Electrical shock could result. Also,

damage to this unit, smoke, and overheating

could result from contact with liquids or dust.

Protect this unit from moisture.

• Make sure that foreign objects do not get

inside the unit; they may cause malfunctions,

or create safety hazards such as electrical

shock or laser beam exposure.

• The beginning of operation is the moment

of the unit installation. Before use the device

in winter it is recommended to heat up the

passenger compartment during 20 seconds or

to the operation temperature.

• Using the unit with the temperature that

goes beyond the operation temperature greatly

decreases the operation resource of the screen

and other components of the unit and can

result in an outage.

• Disconnect the vehicle’s negative battery

terminal while mounting and connecting the

unit.

• The unit is designed for negative

terminal of the battery, which is connected

to the vehicle metal. Please ensure it before

installation.

• When replacing the fuse, be sure to use

one with an identical amperage rating. Using a

fuse with a higher amperage rating may cause

serious damage to the unit.

• Do not allow the speaker wires to be

shorted together when the unit is switched

on. Otherwise it may overload or burn out the

power amplifier.

• Make sure you disconnect the power

supply and aerial if you will not be using

the system for a long period or during a

thunderstorm.

• Make sure you disconnect the power

supply if the system appears to be working

incorrectly, is making an unusual sound, has

a strange smell, has smoke emitting from it

or liquids have got inside it. Let a qualified

technician check the system.

• Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

• Should this product fail to operate

properly, contact your dealer or nearest service

center.

Installation/Connection

Installation

General notes

• Choose the mounting location where the

unit will not interfere with the normal driving

function of the driver.

• Before finally installing the unit, connect

the wiring and make sure that the unit works

properly.

• Consult with your nearest dealer if

installation requires the drilling of holes or other

modifications of the vehicle.

• Install the unit where it does not get in the

driver’s way and cannot injure the passenger if

there is a sudden stop, like an emergency stop.

• If installation angle exceeds 30° from

horizontal, the unit may not perform properly.

• Avoid installing the unit where it would

be subject to high temperature, such as from

direct sunlight, or from hot air, from the heater,

or where it would be subject to dust, dirt or

excessive vibration.

Din Front/Rear-Mount

This unit can be properly installed either

from ‘Front’ (conventional DIN Front-mount) or

‘Rear’ (DIN Rear-mount installation, utilizing

threaded screw Holes at the sides of the unit

chassis). For details, refer to the following

illustrated installation methods.

1. DIN front-mount (Method A)

1. Car dashboard

2. Sleeve

3. Screw

4. Nut (5 mm)

5. Spring washer

6. Screw (5 х 25 mm)

7. Metal strap

8. Flat washer

182

1. Install the sleeve into the dashboard;

ensure it is installed with the correct side and

there are no obstacles (wires, dashboard

elements, etc) for the unit installation.

2. After installing the sleeve into the

dashboard, bend tabs fitting to the size of the

dashboard to fix the sleeve in place.

3. Use the metal strap to fix the rear side of

the unit. Determine a place for fixing and install

the strap as shown in the picture. You can bend

the strap to the needed angle with your hands.

4. Make the necessary wire connections.

Ensure the connections are correct.

5. Install the unit into the sleeve until the side

locks are fixed.

Dismantling the unit

a – Trim frame

b – Frame uninstall direction

c – Release key insertion

Installation/Connection

1. Switch off the unit and detach the front

panel.

2. Insert your fingers into the groove in the

front side of the trim frame (apply some effort to

detach the frame). Pull the frame to detach it.

3. Insert the supplied release keys into the

both sides of the unit body to click, as shown

in the picture. To extract the unit from the

dashboard, pull the release keys or the unit

body to pull it out. Before detaching the unit,

ensure it is not fixed with the metal strap.

Trim frame installation

To install the trim frame, press it to the unit

body and push it to fix it in place. This should

be done before installing the front panel;

otherwise you are not able to install the trim

frame. When the trim frame being installed,

the side with the groove should face down and

fixed first.

2. DIN rear-mount (Method B)

For this method, use the screw holes in the

lateral sides of the unit. Fix the unit with the

help of the factory radio mounting brackets.

1. Select a position in which the screw holes

of the brackets (3) are aligned with the screw

holes in the unit body, and screw in two screws

(2) in each side.

2. Screw.

3. Factory radio mounting brackets.

4. Vehicle dashboard.

5. Lock (remove this part).

The outer trim frame and mounting

sleeve are not used for method of installation.

Detachable control panel

Insert the left locker on the receiver into the

left groove of the panel, and then insert the

right locker into the right groove. Lift the panel

and press on the upper part of the panel until a

click. Ensure the panel is fixed properly.

To detach the front panel, press OPEN

button. When the panel is in horizontal

position, detach the left part of the panel from

the locker, and then detach the right part.

The control panel can easily be

damaged by shocks. After removing it, place

it in a protective case and be careful not to

drop it or subject it to strong shocks. The rear

connector that connects the main unit and the

control panel is an extremely important part. Be

careful not to damage it by pressing on it with

fingernails, pens, screwdrivers, etc.

If the control panel is dirty, wipe off the

dirt with soft, dry cloth only. And use a cotton

swab soaked in isopropyl alcohol to clean the

socket on the back of the control panel.

Anti-theft system

The front panel of this unit can be stored in

the included protective case when not in used

and carried away when you leave the vehicle

to deter theft.

Switch off the power of the unit. Detach the

front panel, then put it to the protective case

and take it with you.

Installation/Connection

Connection

Connection diagram

ISO connection table

Location Function

Connector A Connector B

1 - Rear right (+) - Purple

2 - Rear right (-) - Purple/Black

3 - Front right (+) - Grey

4 Battery +12V/Yellow Front right (-) - Grey/Black

5 Power antenna/Blue Front left (+) - White

6 - Front left (-) - White/Black

7 Ignition key (+12V)/Red Rear left (+) - Green

8 Ground/Black Rear left (-) - Green/Black

Power antenna wire is intended for power supply of the antenna and for remote control of

an additional amplifier.

Parking wire (brown)

Video out (yellow) Subwoofer out

ISO connector

Line out RCA (red=right)

Antenna jack

Fuse 15 A

Line out RCA (white=left)

8 9

Installation/Connection Operation

Using the ISO Connector

1. If your car is equipped with the ISO

connector, then connect the ISO connectors as

illustrated.

2. For connections without the ISO

connectors, check the wiring in the vehicle

carefully before connecting, incorrect connection

may cause serious damage to this unit.

Cut the connector, connect the colored leads

of the power cord to the car battery as shown

in the colour code table above for speaker and

power cable connections.

Parking wire connection

Parking brake lead

Brake light

Car frame

Battery

Brown Wire

If Parking cable is connected to hand brake

switch, the video display of the TFT monitor

will be controlled by driving status. When the

car is moving ahead, if the video disc is played,

the screen shows worning and blank screen.

The warning screen will prevent the driver from

watching images.

1 2

8 9

Installation/Connection Operation

Control elements

Front panel

1. POWER/MUTE button

2. MODE button

3. IR sensor

4. BAND button

5. SEEK+ button

6. OK button/VOLUME knob

7. Display

10 11 12 13

2 3 4 5 6 7 8 9

8. USB port

9. OPEN button

10. MENU button

11. MEM/

button

12. SEEK- button

13. AV input

Inner panel

1 2 3 4 5

1. Memory card slot

2. Eject button

3. Panel status indicator

4. RESET button (hole)

5. Disc loading slot

Pressing RESET hole will erase the clock

setting and stored stations.

Panel status indicator lights up when you flip

down the panel and flashes when you remove

the panel.

Operation

Remote controller

1. POWER button

2. MODE button

3. UP cursor button

4. BND/RDM button

5. ENTER button

6. LEFT cursor button

7. DOWN cursor button

8. STEREO/MONO button

9. PTY/PROG button

10. P.SCN/RPT button

11. SEEK- button

12. AF/TA button

13. OSD button

14. /PBC button

15. Number buttons

16.

button

17. MUTE button

18. MENU button

19. SUB-T button

20. RIGHT cursor button

21. SETUP button

22. ANGLE button

23. INT button

24. VOL+ button

25. A-B/ZOOM button

26. SEL button

27. SEEK+ button

28. VOL- button

29. AUDIO/GOTO button

Changing the battery

1. Press the catch and at the same time pull

out the battery tray.

2. Insert the 1 x lithium battery, type CR

2025 3 V with (+) mark facing up. Insert the

battery tray into the remote control.

• Store the battery where children

cannot reach. If a child accidentally swallows

the battery, consult a doctor immediately.

• Do not recharge, short, disassemble or

heat the battery or dispose it in a fire.

• Do not expose or bring into contact the

battery with other metallic materials. Doing this

may cause the battery to give off heat, crack or

start a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the

battery may give off heat, crack or start a fire.

• Please direct the Remote controller to the

IR sensor of the front panel.

Operation

VOLUME knob on the panel to select the audio

setting item. Press ENTER button or RIGHT

cursor button on the RC or OK button on the

panel to enter the selected item.

Press LEFT/RIGHT buttons on the RC or

rotate VOLUME knob on the panel to adjust the

audio setting. Press SEL button on the RC again

to save the setting and return to current mode.

If turn off the power, all the settings

of each mode will be saved. If turn off the

ACC power, all the settings will be clear and

become factory default setting. If you don’t

adjust setting within several seconds after

selecting the desired setting item, the unit will

automatically return to the current mode.

System setup

Press MENU button on the panel or RC to

enter Setting Menu. Press UP/DOWN cursor

buttons on the RC or rotate VOLUME knob on

the panel to select a menu page. Press ENTER

button or RIGHT cursor button on the RC or

press OK button on the panel to enter the page.

Press UP/DOWN cursor buttons on the RC or

rotate VOLUME knob on the panel to select an

item, then press ENTER button on the RC or OK

button on the panel to adjust the setting.

Press MENU button to return to the last

setting list.

AUDIO MENU

• Bass: Support 10 levels. Default level is 0.

• Treble: Support 10 levels. Default level is 0.

• Balance: Support 10 levels for each left

and right channel. Default is left equal to right.

• Fader: Support 10 levels for each front and

rear channel. Default is front equal to rear.

• EQ DSP: FLAT => CLASSICS => POP =>

ROCK => DSP OFF.

PICTURE MENU (available in DVD/USB/

Card modes only)

• Red: Adjust level of red color. Support 50

levels. Default level is 25.

• Green: Adjust level of green color. Support

50 levels. Default level is 25.

• Blue: Adjust level of blue color. Support 50

levels. Default level is 25.

• Brightness: Adjust level of screen

General operations

Reset the unit

Operating the unit for the first time or after

replacing the car battery, you must reset the

unit. Press RESET button (hole) with a pointed

object (such as a ballpoint pen) to set the unit

to initial state.

When some errors occur, you can also

press RESET button to resume to normal,

and it will erase the clock setting and some

memorized functions.

Turning the unit on/off

Press any button on the panel or the RC

(except OPEN button) to turn on the unit. Press

and hold POWER/MUTE button on the panel

or press POWER button on the RC to turn off

the unit.

Mode selection

Repeatedly press MODE button on the RC

or on the panel to select a mode: Tuner =>

DVD => USB => Card => AV IN.

The DVD, Card and USB modes are

only available when corresponding storages

are inserted into the unit.

Mute function

Press MUTE button on the RC or POWER/

MUTE button on the panel to turn off the

sound. “MUTE” appears on the display. Press

the button again or adjust volume to resume

the sound output.

Volume control

Press VOL+/VOL- buttons on the RC or

rotate VOLUME knob on the panel to decrease

or increase sound volume level.

Setting the sound characteristics

Press SEL button on the RC to select the

audio setting menu: BASS =>TREBLE =>

BALANCE => FADER => EQ. Press UP/

DOWN cursor buttons on the RC or rotate

12 13

Operation Operation

brightness. Support 50 levels. Default level is 25.

• Contrast: Adjust level of screen contrast.

Support 50 levels. Default level is 25.

• Sharpness: Adjust level of screen

sharpness. Support 15 levels. Default level is 10.

• Screen: Adjust screen aspect: 16:9 => 4:3

=> FULL.

• Color reset: Resume color default status.

(Select YES or NO with cursor buttons, press

ENTER button on the RC or OK button on the

panel to confirm).

EXPERT MENU

• DX: Set search radio station by DX or

LOCAL mode. DX => LOCAL.

• Stereo: Set radio audio at STEREO or

MONO mode, STEREO => MONO.

• Beep: Set press button sound. 2ND =>

ALL => OFF.

• Loud: Set loudness on or off. OFF => ON.

• Subwoofer: Set subwoofer ON or OFF.

• Backlight: Set OSD backlight: HIGH =>

LOW => MID.

• OSD color: Set OSD color: DARK BLUE

=> VIOLET => LIGHT BLUE.

CLOCK MENU

• Clock: Set CLOCK display time or not.

OFF/ON.

• Clock Hour: set clock 12H/24H.

• Clock adjust: Set CLOCK ADJUST time.

Subwoofer

Connect a subwoofer to this unit using the

Subwoofer output of this unit. For subwoofer

operation an external amplifier is required.

AV in jack

AV jack is intended to receive audio and video

signals by connecting to external device.

Radio operations

Band selection

Press BND/RDM button on the RC or BAND

button on the panel to switch to the bands in

the following order: FM1 - FM2 - FM3 (OIRT) –

MW (AM).

Manual/automatic tuning

• Manual tuning: Press and hold SEEK- /

SEEK+

buttons on the RC to enter manual

tuning mode. MANUAL will be displayed.

Press these buttons repeatedly to change the

frequency upward or downward step by step.

• Automatic tuning: Press repeatedly SEEK-

/SEEK+ buttons on the RC or press

and hold these buttons on the panel to start

automatic seeking for an available radio station

downward or upward. After being found the

station will be played. To stop seeking, press

one of these buttons again.

Programming stations

• There are 6 numbered preset buttons on

the RC, with which you can store and recall

stations for each band (18 FM, 6 AM). Select

a station, then press and hold a preset button.

The station will be saved in the memory under

the corresponding number. To recall a stored

station, press the corresponding preset button.

• You also can save stations in the memory

with MEM/

button on the front panel. When

the needed frequency is found, press MEM/

then rotate VOLUME knob to select a memory

position (PRESET 1 - 6) and press OK button

to confirm saving.

Auto memory store/Preset scan

Auto store: Select a band, press and hold

P.SCN/RPT button on the RC to enter auto

store mode. The radio will automatically store 6

stations to the 6 preset memories of the current

band. To stop auto store, press the button

again.

During auto station preset, the unit will

search and store stations with the strong signal

first, and then weaker signal stations until the

memories are full.

Preset scan: Select a band, press P.SCN/

RPT button on the RC to scan all preset

stations in the memories of the current band.

To stop preset scan, press the button again.

12 13

Operation Operation

Stereo/Mono reception

In FM mode, press STEREO/MONO button

on the RC to select stereo or mono signal

reception mode.

On-screen display

Press OSD button on the RC to show

enabled PTY function icon.

RDS background

RDS service availability varies with areas.

Please understand if RDS service is not

available in you area, the following service is

not available.

AF (Alternative frequencies) function

Press and hold AF/TA button on the RC

or MENU button on the panel to enable AF

function. When the radio signal strength is poor,

enabling the AF function will allow the unit to

automatically search another station with the

same PI (Program Identification) as the current

station but with stronger signal strength.

AF indicator on the display will flash until

RDS information is received. If RDS service is

not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Press AF/TA button on the RC or press and

hold OK button on the panel to activate the

traffic alarm function.

When TA function is activated, it will search

the station with TA information automatically.

If there is no TA information, it will search the

station with TP information automatically, if

there is no TP information either, it will return to

the previous station after searching.

When receiving the station with TP

information but without TA information,

TP icon is on and TA icon keeps blinking;

when receiving the station with TP and TA

information, both TP and TA icons are on.

When playing in other mode and TA

information is received, it will change to the

radio mode automatically. After playing over, it

will return to the previous mode. Press AF/TA

button on the RC once to ignore the received TA

information, do it twice to turn off the function.

PTY (Program type) function

Press PTY/PROG button on the RC to open

PTY program type list, and repeat pressing

PTY/PROG button to select a PTY type. After

selecting the program type you want, press

number buttons 1 - 6 on the RC to start search.

Press it again to stop the PTY search. If PTY

code is different or not available, “PTY NONE”

blinks on the display.

Other functions

Press MENU button on the panel or RC to

enter Setting Menu. Press UP/DOWN cursor

buttons on the RC or rotate VOLUME knob on

the panel to select RDS SETUP page. Press

ENTER button or RIGHT cursor button on the

RC or press OK button on the panel to enter the

page. Press UP/DOWN cursor buttons on the RC

or rotate VOLUME knob on the panel to select

an item, and then press SEL button on the RC or

OK button on the panel to adjust the setting.

Press ENTER button on the RC or OK

button on the panel to confirm, press MENU

button to return to last settings list.

RDS SETUP

• TA ALARM/SEEK: In TA SEEK mode, the

unit will seek for traffic announcement program;

in TA ALARM mode, the alarm is set off.

• PI SOUND/MUTE: Choose either PI sound

or PI mute. PI sound refers to the reception

noise when the AF function tries to scan

alternative frequency.

• RETUNE S/L: RETUNE refers to the time

period the unit allows for radio scan when

reception is interrupted. SHORT represents

a time period of 30 seconds and LONG

represents a time period of 90 seconds.

• MASK DPI/ALL: During MASK DPI mode,

the unit will mask only the AF which has

different PI, this is the default mode; during

MASK ALL mode, the unit will mask the AF

which has different PI and no RDS signal with

high field strength.

• EON TA DX/LOCAL: EON (Enhanced

Operation

Other Networks) - This unit is equipped with

the latest technology of EON control, so that

when you are listening to Radio or CD, if there

is any travel announcement from a nearby

local station, the radio will already know the

frequency of that radio station. Then it will

receive the station, turn up the volume, or

interrupt the playback for the duration of the

announcement. At the end of the announcement

the radio will return to its previous state ready

for the next announcement.

• REG ON/OFF: When REG is available (On),

the receiver accepts regional variants of the

tuned station display. When REG is unavailable

(Off), the receiver ignores regional variants.

• TA VOL: You can set the default volume of

TA announcement. Support 50 levels. Default

level is 15.

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 2.0. Capacity: up to 8

Gb.

For correct and satisfactory operation,

licensed SD/MMC memory cards of famous

brands should be used with this unit. Avoid

using memory cards of unknown brands.

Capacity: up to 8 Gb.

Insert/Eject disc

• Open the front panel and insert a disc into

the disc slot with label side up. The disc will be

automatically loaded into the unit. The first file

in the root folder will be played. Close the front

panel.

• Open the front panel and press EJECT

button to eject the disc from the slot. If the disc

is not removed from the slot within several

seconds, it will be automatically loaded into

the slot again. When the disc is ejected and

removed, the unit will automatically switch to

another mode.

Inserting an SD/MMC card/USB device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the

USB slot cover on the front panel and insert

a USB into the USB slot. Then the playing

mode will be changed into Card or USB mode

automatically. The first card/USB device track

playback will start.

When SD/MMC card and USB device are

both inserted, the playing mode will be changed

into the mode of the device inserted later.

Play/pause

The unit will automatically play from the first

sound track recorded on a disc/SD/MMC/USB

device. To ensure good system performance,

wait until the unit finishes reading the disc/

device information before proceeding. Press

button on the RC or MEM/ button on

the panel to pause playback, press it again to

resume playback.

MP3/DivX/JPEG file playback

When you insert a storage containing MP3/

DivX/JPEG file, the screen will show following

interface:

1 2 3 4 5

6 7 8

1. Storage folder list

2. Scroll bar

3. Current playback info

4. Current folder content (current file is

highlighted)

5. Scroll bar

Operation

6. Audio track selection

7. Image file selection

8. Video file selection

Use cursor buttons to navigate in the

interface and press ENTER button to confirm

your selection.

Some AVI files cannot be played due

to their parameters and recording conditions.

Video files more than 2 Gb having AVI

extension can be played partially.

Stop playback

During playback of a disc/USB/SD/MMC

card, press /PBC button on the RC or press

and hold MEM/ on the panel to stop the

playback. Press

button on the RC or on

the unit to start playback again. Playback will

resume from the point it was stopped at. If you

press /PBC button on the RC or press and

hold MEM/ on the panel twice, playback will

stop completely and can be resumed only from

the beginning of the disc.

Selecting tracks

During playback press SEEK- button

to play the beginning of current track, press it

again to play the previous track. Press SEEK+

button to play the next track. Press number

buttons (0-9) on the RC to select the desired

track/chapter.

Fast forward/rewind

Press and hold SEEK- or SEEK+

buttons repeatedly for fast backward or forward

playing correspondingly. With each pressing

and holding playback speed will increase.

While fast playback, press

button on the

RC or MEM/ button on the panel to resume

normal speed.

When fast backward/forward playback

reaches the previous or next track, the unit will

resume normal playback.

A-B segment repeat

Press A-B/ZOOM button to set point A,

press one more time to set point B and start

A-B repeating. Press this button one more time

to cancel the repeating function.

Repeat playback

Press P.SCAN/RPT button repeatedly for

repeat playing in different modes: track/chapter

repeat, folder repeat, disc repeat, repeat cancel

(depending on the format used).

Intro playback

Press INT button on the RC to activate

introduction function. Several initial seconds

of each track will be played. Press the button

again to cancel intro playback.

GOTO

Press and hold AUDIO/GOTO button to

show the playback parameters for the current

chapter/track/time (track/title/chapter number or

time). Press cursor buttons to navigate between

the parameters and use number buttons to

input needed settings. Press OK button on

the panel or ENTER button on the RC to start

playback from the set number or time.

Random playback

Press BND/RDM button on the RC to

activate random playing mode. Press one more

time to return to normal playing.

Programming the playback

• Press PTY/PROG button to open program

menu.

• Use cursor buttons to select the program

position and use number buttons to input the

desired track/title/chapter (depending on the

disc type).

• Press

button on the RC or MEM/

button on the panel to start program play, or

move the cursor to select PLAY and press

ENTER button on the RC or OK button on the

panel to play.

• Move the cursor to CLEAR, press ENTER

button on the RC or OK button on the panel to

delete the programmed list. Press PTY/PROG

button to quit programming.

Operation

OSD (On Screen Display) function

Press and hold OSD button on the

RC repeatedly to show current playback

information, such as number of track/chapter/

title, current track/chapter/title time elapsed/

remaining, total track/chapter/title time

remaining (depending on the disc type).

Zooming in/out

During playback of video or images on disc/

USB/SD/MMC, press and hold repeatedly

A-B/ZOOM button on the RC, the picture will

be zoomed in the sequence: X2 =>X3 =>X4

=>X1/2 => X1/3 => X1/4 => Normal.

PBC (Playback Control) function (for

VCD only)

This function is only available for the VCD

with PBC function.

Press and hold

/PBC button on the RC to

set PBC on/off; when PBC is off, the screen will

show PBC menu if you switch PBC on. If the

menu consists of a list of titles, you can select a

desired one using number buttons on the RC.

Changing angle (for DVD only)

Press ANGLE button on the RC to playback

images at different camera angles. If a disc

doesn’t support multi-angle playback, this

function will not work.

Selecting audio language (for DVD only)

During DVD disc playback, press AUDIO/

GOTO button on the RC repeatedly to select

the audio language to listen. This function will

not work if a disc does not support multi-

language audio.

Selecting subtitle language (for DVD

only)

If your DVD disc supports multi-language

subtitle, press SUB-T button on the RC

repeatedly to switch among disc-supported

languages.

Selecting sound channel (for VCD only)

During VCD disc playback press AUDIO/

GOTO button on the RC to select the channel:

Mono L => Mono R => MIX Mono => Stereo.

Menu navigation (for DVD only)

Press and hold MENU button on the RC

to activate the disc menu list on the screen.

Choose the desired item. Press ENTER button

button on the RC or OK button on the

panel to confirm the selected item and start

playing.

Title and menu are only available if the

disc has these functions.

ID3 Tag function

If a MP3 file has ID3 tag information in the

supported ID3 format, such information will be

displayed on the LCD while playback

System setup

Press SETUP button on the RC to display

setup screen, use LEFT/RIGHT cursor buttons

and ENTER button to select the desired setup

page: System, Language, Audio, Video, Digital.

In the selected page select an option using

UP/DOWN cursor buttons, then press RIGHT

cursor button to go to setting list. Use UP/

DOWN cursor buttons to select the needed

setting. Press ENTER button on the RC or OK

button on the panel to confirm.

System setup

SYSTEM SETUP

TV SYSTEM

SCREEN SAVER

VIDEO

TV TYPE

PASSWORD

RATING

DEFAULT

Operation

TV system

Select the TV system in the setting menu

(NTSC, PAL, PAL-60, AUTO).

Screen saver

The screen saver appears if disc stops for

more than 3 minutes. Original setting: On.

Video

Interlace-S-Video

TV type

Select TV type to watch wide screen movies.

4:3 PS: For 4:3 TV, left and right edges will

be cut.

4:3 LB: For 4:3 TV, black bars will appear on

top and bottom.

16:9: For 16:9 wide screen TV.

Password

Original password is 0000.

Rating

The rating of the disc is from 1 to 8:

1 (KID SAFE) with the most limits when

playing.

8 (ADULT) with the least limits when playing.

Original setting: 8.

The rating can be selected only under the

password unlocked status, and the limits can be

worked only under the password locked status.

Default

If this item is selected, the unit will return to

original setting.

Language setup

LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

DIVX [R] VOD

OSD language

Select the language to be used for the on-

screen display.

Audio language

Select the language to be used for the audio.

You can select a preferred audio from those

included on the DVD video disk.

Subtitle language

Select the language to be used for the

Subtitles. You can select a preferred subtitle

from those included in the DVD Video disk.

Menu language

Select the language to be used for the Menu.

You can select a preferred audio from those

included on the DVD.

Audio setup

AUDIO SETUP

KEY

Key

Select key up/down according to your

preference.

Video setup

VIDEO SETUP

BRIGHTNESS

CONTRAST

HUE

SATURATION

SHARPNESS

Set a parameter with UP/DOWN cursor

buttons: Brightness, Contrast, Hue, Saturation,

Sharpness.

Operation

Digital setup

DIGITAL SETUP

DYNAMIC RANGE

DUAL MONO

Dynamic range

When you select the compressed mode as

“line out”, select it to adjust the compression

proportion and get the different compressed

effect. When select FULL, the audio signal is

minimum; when select OFF, the audio signal is

maximum.

Dual mono

Select the audio channel from STEREO,

MONO L, MONO R and MIX MONO.

Cleaning the unit body

Wipe with a soft cloth. If the cabinet is very

dampen (not dropping wet) the cloth with a

weak solution of soapy water, and then wipe

clean.

Accessories

1. Receiver

2. Front panel

3. Protective case

4. Remote controller

5. ISO connector set (A+B)

6. Mounting parts:

Nut

Spring washer

Flat washer

Bolt

Screw

Metal strap

Release key

Trim frame

Rubber cushion

7. Instruction manual

8. Warranty card

9. Consumer information

General information

Handling compact discs

• Do not insert anything other than a CD into

the CD loading slot.

• Do not use cracked, chipped, warped, or

otherwise damaged discs as they may cause

skipping or noise damage the player.

• Handle the disc only by the edges (as

shown in the picture). To keep discs clean do

not touch its surface.

• Store discs in their cases when not in use.

• Do not expose discs to direct sunlight,

high humidity, high temperature or dust.

• Prolonged exposure to extreme

temperature (such as leaving the discs in your

car during summertime) can wrap a disc.

• Do not attach labels, write on or apply

chemicals to the surface of the discs.

• Do not touch the recorded surface of the

discs.

• Use 12-cm CDs. Use only conventional,

fully circular discs. Do not use shaped discs.

Cleaning discs

Fingerprints should be carefully wiped from

the surface of disc with a soft cloth. Unlike

conventional records, compact discs have no

grooves to collect dust and macroscopic dirt,

so gently wiping them with a soft cloth should

remove must panicles. Wipe in a straight

motion from the center to the edge.

Never use thinner benzine, record cleaner

or anti static spray on a compact disc. Such

chemicals can damage its plastic surface.

1 pc

4 pcs

1 pc

2 pcs

1 pc

20 21

General information General information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No power The car ignition is not on. If the power supply is properly connected

to the car accessory switch the ignition

key to “ACC”.

The fuse is blown. Replace the fuse.

No sound Volume is in minimum. Adjust volume to a desired level.

Wiring is not properly

connected.

Check wiring connection.

Bad sound quality The installation angle is more

than 30 degrees.

Adjust the installation angle to less than

30 degrees.

The disc is extremely dirty or

defective.

Clean the compact disc/try to play a new

one.

Disc cannot be

loaded or ejected

The unit already contains a

disc.

Remove the disc in the player then put a

new one.

Moisture condensation. Leave the unit idle for an hour, then retry.

Disc cannot be

read

The disc is inserted upside

down.

Insert the compact disc with the label

side facing upward.

Compact disc is extremely

dirty or defective.

Clean the disc or try to play a new one.

Temperature inside the car is

too high.

Cool off until the ambient temperature

returns to normal.

Buttons do not

work

The built-in microcomputer is

not operating properly.

Reset the unit with the help of RESET

button.

Front panel is not properly fix

into its place.

Install the front panel properly.

The radio does

not work

The antenna cable is not

connected.

Insert the antenna cable properly.

The radio station

automatic tuning

does not work

The signals are too weak. Select stations manually.

Страница загружается ...

Hyundai H-CMD4024 Руководство пользователя

Бренд: Hyundai

Модель: H-CMD4024

Категория: Мультимедиа-приемники для автомобилей

Тип: Руководство пользователя

Это руководство также подходит для

Скачать PDF

сообщить о нарушении

Hyundai H-CMD4024 Руководство пользователя

Это руководство также подходит для

Hyundai H-CMD4024 Руководство пользователя

Похожие модели бренда

Модели других брендов