Yamaha CLP-470 Инструкция по применению

OWNER’S MANUAL

IMPORTANT

— Check your power supply —

Make sure that your local AC mains voltage matches the voltage speciﬁed on the name plate on the bottom panel. In some areas a

voltage selector may be provided on the rear panel of the main keyboard unit near the power cord. Make sure that the voltage

selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting

use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.

For information on assembling the instrument, refer to the instructions at the end of this manual.

C LP

-

470

CLP

-

440

CLP

-

430

CLP

-

S408

CLP

-

S406

CLP

-

465GP

EN

Yamaha Global Home

http://www.yamaha.com/

Yamaha Manual Library

http://www.yamaha.co.jp/manual/

U.R.G., Digital Musical Instruments Division

301MWGR*.*-**F0

WZ37930

SPECIAL MESSAGE SECTION

PRODUCT SAFETY MARKINGS: Yamaha

electronic products may have either labels similar to the

graphics shown below or molded/stamped facsimiles of

these graphics on the enclosure. The explanation of these

graphics appears on this page. Please observe all

cautions indicated on this page and those indicated in the

safety instruction section.

See bottom of Keyboard enclosure for graphic symbol markings.

The exclamation point within the

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the product.

The lightning flash with arrowhead

symbol, within the equilateral

triangle, is intended to alert the user to

the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electrical shock.

IMPORTANT NOTICE: All Yamaha electronic

products are tested and approved by an independent

safety testing laboratory in order that you may be sure

that when it is properly installed and used in its normal

and customary manner, all foreseeable risks have been

eliminated. DO NOT modify this unit or commission

others to do so unless specifically authorized by Yamaha.

Product performance and/or safety standards may be

diminished. Claims filed under the expressed warranty

may be denied if the unit is/has been modified. Implied

warranties may also be affected.

SPECIFICATIONS SUBJECT TO CHANGE: The

information contained in this manual is believed to be

correct at the time of printing. However, Yamaha

reserves the right to change or modify any of the

specifications without notice or obligation to update

existing units.

ENVIRONMENTAL ISSUES: Yamaha strives to

produce products that are both user safe and

environmentally friendly. We sincerely believe that our

products and the production methods used to produce

them, meet these goals. In keeping with both the letter

and the spirit of the law, we want you to be aware of the

following:

Battery Notice: This product MAY contain a small non-

rechargeable battery which (if applicable) is soldered in

place. The average life span of this type of battery is

approximately five years. When replacement becomes

necessary, contact a qualified service representative to

perform the replacement.

Warning: Do not attempt to recharge, disassemble, or

incinerate this type of battery. Keep all batteries away

from children. Dispose of used batteries promptly and as

regulated by applicable laws. Note: In some areas, the

servicer is required by law to return the defective parts.

However, you do have the option of having the servicer

dispose of these parts for you.

Disposal Notice: Should this product become damaged

beyond repair, or for some reason its useful life is

considered to be at an end, please observe all local, state,

and federal regulations that relate to the disposal of

products that contain lead, batteries, plastics, etc.

NOTICE: Service charges incurred due to lack of

knowledge relating to how a function or effect works

(when the unit is operating as designed) are not covered

by the manufacturer’s warranty, and are therefore the

owners responsibility. Please study this manual carefully

and consult your dealer before requesting service.

NAME PLATE LOCATION: The graphic below

indicates the location of the name plate. The model

number, serial number, power requirements, etc., are

located on this plate. You should record the model

number, serial number, and the date of purchase in the

spaces provided below and retain this manual as a

permanent record of your purchase.

Model

Serial No.

Purchase Date

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

92-469- 1 (bottom)

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved

by Yamaha may void your authority, granted by the

FCC, to use the product.

2. IMPORTANT

: When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could void

your FCC authorization to use this product in the

USA.

3. NOTE: This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result in

harmful interference with other electronic devices.

This equipment generates/uses radio frequencies

and, if not installed and used according to the

instructions found in the users manual, may cause

interference harmful to the operation of other

electronic devices. Compliance with FCC regulations

does not guarantee that interference will not occur in

all installations. If this product is found to be the

source of interference, which can be determined by

turning the unit “OFF” and “ON”, please try to

eliminate the problem by using one of the following

measures:

Relocate either this product or the device that is

being affected by the interference.

Utilize power outlets that are on different branch

(circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/

reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to co-axial type

cable.

If these corrective measures do not produce

satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you

can not locate the appropriate retailer, please contact

Yamaha Corporation of America, Electronic Service

Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

FCC INFORMATION (U.S.A.)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party :

Yamaha Corporation of America

Address : 6600 Orangethorpe Ave.,

Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Piano

Model Name : CLP-470/440/430/S408/S406/

465GP

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received includ-

ing interference that may cause undesired operation.

See user manual instructions if interference to radio

reception is suspected.

*This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are

coloured in accordance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured makings

identifying the terminals in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

•This applies only to products

distributed by Yamaha Music U.K. Ltd.

(2 wires)

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters

or radiators, and do not excessively bend or otherwise damage

the cord, place heavy objects on it, or place it in a position

where anyone could walk on, trip over, or roll anything over it.

• Only use the voltage specified as correct for the instrument.

The required voltage is printed on the name plate of the

instrument.

• Use only the supplied power cord/plug.

• Check the electric plug periodically and remove any dirt or

dust which may have accumulated on it.

• This instrument contains no user-serviceable parts. Do not

open the instrument or attempt to disassemble or modify the

internal components in any way. If it should appear to be

malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in

damp or wet conditions, place on it any containers (such as

vases, bottles or glasses) containing liquids which might spill

into any openings. If any liquid such as water seeps into the

instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument

inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn

off the power switch and disconnect the electric plug from the

outlet. Then have the device inspected by Yamaha service

personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the

instrument.

Power supply/Power cord

Do not open

Water warning

Fire warning

If you notice any abnormality

DMI-3 1/2

5

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound quality,

or possibly cause overheating in the outlet.

• When removing the electric plug from the instrument or an

outlet, always hold the plug itself and not the cord. Pulling by

the cord can damage it.

• Remove the electric plug from the outlet when the instrument is

not to be used for extended periods of time, or during electrical

storms.

• Read carefully the attached documentation explaining the

assembly process. Failure to assemble the instrument in the

proper sequence might result in damage to the instrument or

even injury.

• Do not place the instrument in an unstable position where it

might accidentally fall over.

• When transporting or moving the instrument, always use two

or more people. Attempting to lift the instrument by yourself

may damage your back, result in other injury, or cause damage

to the instrument itself.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you

are using is easily accessible. If some trouble or malfunction

occurs, immediately turn off the power switch and disconnect

the plug from the outlet. Even when the power switch is turned

off, electricity is still flowing to the product at the minimum

level. When you are not using the product for a long time,

make sure to unplug the power cord from the wall AC outlet.

• Before connecting the instrument to other electronic

components, turn off the power for all components. Before

turning the power on or off for all components, set all volume

levels to minimum.

• Be sure to set the volumes of all components at their minimum

levels and gradually raise the volume controls while playing

the instrument to set the desired listening level.

• Do not insert a finger or hand in any gaps on the key cover or

instrument. Also take care that the key cover does not pinch

your finger.

• Never insert or drop paper, metallic, or other objects into the

gaps on the key cover, panel or keyboard. This could cause

physical injury to you or others, damage to the instrument or

other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons,

switches or connectors.

• Do not use the instrument/device or headphones for a long

period of time at a high or uncomfortable volume level, since

this can cause permanent hearing loss. If you experience any

hearing loss or ringing in the ears, consult a physician.

• Do not place the bench in an unstable position where it might

accidentally fall over.

• Do not play carelessly with or stand on the bench. Using it as a

tool or stepladder or for any other purpose might result in

accident or injury.

• Only one person should sit on the bench at a time, in order to

prevent the possibility of accident or injury.

• If the bench screws become loose due to extensive long-term

use, tighten them periodically using the included tool.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that

is lost or destroyed.

Always turn the power off when the instrument is not in use.

Power supply/Power cord

Assembly

Location

Connections

Handling caution

Using the bench (If included)

DMI-3 2/2

6

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property,

follow the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV, or radio may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near

a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal

components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• In the case of a model with a polished finish, bumping the surface of the instrument with metal, porcelain, or other

hard objects can cause the finish to crack or peel. Use caution.

• During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of

the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water

off immediately with a soft cloth.

 Saving data

• Saved data may be lost due to malfunction or incorrect operation. Save important data to a USB storage device/

external device such as a computer (page 42).

• To protect against data loss through media damage, we recommend that you save your important data onto two USB

storage devices.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is

strictly prohibited except for your personal use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with

respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all

computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of

such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright

has legal consequences. DON'T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and displays as shown in this manual are for instructional purposes only, and may appear somewhat

different from those on your instrument.

• Windows is a registered trademark of Microsoft® Corporation in the United States and other countries.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their

respective companies.

7

Included Accessories

Thank you for purchasing the Yamaha Clavinova! We recommend that you read this manual carefully

so that you can fully take advantage of the advanced and convenient functions of the Clavinova.

We also recommend that you keep this manual in a safe and handy place for future reference.

Included Accessories

 Owner’s manual (this book)

 “50 greats for the Piano” (Music Book)

 My Yamaha Product User Registration

The PRODUCT ID on the sheet will be needed

when you fill out the User Registration form.

 AC Power Cord

 Bench

A bench may be included or optional,

depending on your locale.

About the Manuals

This instrument has the following documents and

instructional materials.

 Included Documents

Owner’s Manual (this book)

This document explains how to use the

Clavinova.

•Introduction

This section explains how to set up and start using your

Clavinova. Setup is so simple, you can start playing right

away.

• Advanced Functions

This section introduces useful functions that aid in your

practice, such as playing back the preset songs, recording

your performance and more.

•Detailed Settings

This section explains how to make detailed settings for the

Clavinova’s various functions.

•Appendix

This section contains various reference material, such as the

display message list, Voice list and other information.

Icons on this manual

Example

This indicates that the relevant function is only available on

certain models. These icons indicate that the function is

available on the CLP-470/440/430/465GP but not on the

CLP-S408/S406.

 Online Materials

(Downloadable from the web)

MIDI Data Format

This document contains both the MIDI Data

Format and the MIDI Implementation Chart.

MIDI Basics (English, French, German

and Spanish only)

If you want to know more about MIDI and how to

use it, refer to this introductory book.

The instructional materials above are available for downloading

from the Yamaha Manual Library. Access the Yamaha Manual

Library, then enter your model name (CLP-470, for example) in

the Model Name area to search for the manuals.

470 440 430 S408 S406 465GP

Yamaha Manual Library

http://www.yamaha.co.jp/manual/

8

Main Features

Real Grand Expression (RGE) Sound Engine

This lets you enjoy the playing response and expressive capability of a concert grand piano. In addition to providing

smooth tonal changes that respond to your playing touch, it also features a new Smooth Release function which can

clearly enunciate staccato notes and produce the sound of lingering resonance when gently lifting your fingers from the

keys. These effects capture the true essence of an acoustic grand piano to help you create and perform with luscious

piano-like expression.

Highly evolved touch and expression: Graded Hammer 3 (GH3) keyboard (CLP-430/

465GP) and Graded Hammer 3 (GH3) keyboard with synthetic ivory keytops (CLP-

440/S406)

The Graded Hammer keyboard features natural grand-piano type key weights (heavier in the low range and lighter in the

higher range) providing a pleasant playability that is unmatched by conventional electronic pianos.

The Graded Hammer keyboard also offers superb playability for legato (without pedal operation) and repetitive striking

techniques, as with a grand piano.

The CLP-440/S406 feature synthetic ivory keytops which simulates the moderate hygroscopic characteristics of real ivory

and offers a less slippery surface, smooth key movement, and a warm and inviting color.

NW (Natural Wood) keyboard with synthetic ivory keytops and Linear Graded

Hammer (CLP-470/S408)

In addition to the features offered by the GH3 keyboard with the synthetic ivory top model, the CLP-470/S408 uses

natural wood for the inside of the white keys (NW keyboard), and utilizes the Linear Graded Hammer feature, in which

the hammer weight of all keys is different, just as on an acoustic piano. These features provide a heavier weighted touch

that surpasses that of conventional electronic pianos and is closer in feel to a grand piano.

Audio Playing and Recording from a USB Flash Memory

Audio files (.wav) saved to a USB storage device such as a USB flash memory can be played back on the instrument.

Moreover, since you can record your performance as audio data to a USB flash memory device, it is possible to listen to

your performance on portable music players, with the data transferred by computer.

9

Table of Contents

PRECAUTIONS ...........................................................4

NOTICE........................................................................6

Included Accessories ....................................................7

About the Manuals .......................................................7

Main Features ...............................................................8

Introduction

Panel Controls ............................................................10

Getting Started

— Playing the Clavinova as a Piano ...........................12

Key Cover.................................................................................12

Music Rest ................................................................................13

Music Braces ............................................................................14

Lid..............................................................................................14

Turning the power on.............................................................15

Setting the volume — [MASTER VOLUME] .....................16

Using headphones...................................................................17

Switching the speakers on/off................................................17

Using the pedals ......................................................................18

Adjusting the touch sensitivity — [TOUCH] .....................19

Using the metronome — [METRONOME]........................20

Maintenance ...............................................................21

Advanced Functions

Playing various musical instrument sounds

(Voices) ......................................................................22

Selecting Voices.......................................................................22

Listening to the Voice Demo Songs .....................................22

Enhancing and customizing the sound — [BRILLIANCE]/

[REVERB]/[EFFECT].............................................................24

Transposition — [TRANSPOSE] .........................................25

Layering two Voices (Dual mode) ........................................26

Splitting the keyboard range and playing two different

Voices (Split mode).................................................................27

Playing back Songs .....................................................29

Songs compatible with this instrument ...............................29

Playing back Songs..................................................................30

Useful playback functions......................................................32

Playing a one-hand part — Part Cancel function (MIDI

Songs)........................................................................................32

A-B Repeat function (MIDI Songs)......................................33

Recording Your Performance ....................................34

Quickly recording a performance without specifying a part

(MIDI/Audio recording)........................................................34

Recording specific parts of a Performance

(MIDI recording) ....................................................................36

Deleting recorded performance data (MIDI recording)... 37

Changing the initial settings such as Voice and Tempo after

recording (MIDI recording).................................................. 38

Handling Song Files ...................................................40

Convert a MIDI Song to an Audio Song during

playback ................................................................................... 41

Copying User Songs in the instrument to a USB storage

device........................................................................................42

Deleting a Song file in the USB storage device ................... 43

Formatting the USB storage device...................................... 44

Connections................................................................45

Connectors...............................................................................45

Connecting a USB storage device.........................................47

Connecting to a computer..................................................... 48

Connecting external MIDI devices ......................................50

Detailed Settings

Function Parameters — Various Convenient

Settings ....................................................................... 51

Function mode — basic operation ....................................... 52

Function parameters — details............................................. 53

Restoring the default (factory-programmed) settings.......61

Appendix

Message List................................................................62

Troubleshooting.........................................................63

Preset Voice List .........................................................64

Default Setting List .................................................... 67

Assembling the Clavinova..........................................69

Assembly Precautions ............................................................ 69

CLP-470 Assembly .................................................................70

CLP-440/430 Assembly.......................................................... 73

CLP-S408 Assembly ...............................................................76

CLP-S406 Assembly ...............................................................80

CLP-465GP Assembly............................................................ 84

Specifications.............................................................. 87

Index ........................................................................... 89

10

Introduction

Panel Controls

Introduction

Panel Controls

The panel illustrations shown are taken from the CLP-470.

[ ] Power switch ............................................page 15

[MASTER VOLUME] slider ............................page 16

For adjusting the volume level using this slider.

[DEMO] button................................................page 23

Demonstration playback is available for each Voice.

[TRANSPOSE] button.....................................page 25

You can shift the pitch of the entire keyboard up or down so

that the pitch will match that of another instrument or singer,

while you play the same, unshifted keys.

[REC] button....................................................page 34

For recording your keyboard performance.

[RIGHT], [LEFT] buttons ...............................page 32

For turning the left- and right-hand parts on or off as desired

so you can practice the corresponding part (the part that is

turned off) on the keyboard.

[PLAY/PAUSE], [STOP] buttons.....................page 30

These control playback of the Preset Songs and your recorded

songs, etc.

[SONG SELECT] button..................................page 30

For selecting a Song to play back or record.

[FILE] button ...................................................page 40

For managing song files such as copying recorded songs to a

USB storage device, as well as formatting a USB storage device.

[TEMPO/FUNCTION],

[TEMPO/FUNCTION

] buttons .... pages 20, 52

For changing the song tempo (speed) and selecting other

useful functions.

[METRONOME] button..................................page 20

For using the metronome.

Display............................................................. page 15

NOTICE

Do not turn off the power to the instrument while flashing dashes

appear in the display (indicating the operation is in process). Doing

so may damage the data.

[-/NO], [+/YES] buttons

For setting values or performing file operations. Pressing both

buttons simultaneously for certain value settings (Transpose,

Tempo, etc.) restores the default value.

Voice buttons................................................... page 22

For selecting Voices.

[VARIATION] button

(CLP-470/440/S408/S406)............................... page 22

Lets you call up an alternate version of the selected Voice,

having a different sound.

[SPLIT] button

(CLP-470/440/S408/S406)............................... page 27

For playing different Voices on the left- and right-hand

sections of the keyboard.

[BRILLIANCE], [REVERB],

[EFFECT] buttons........................................... page 24

For adjusting the brightness of the sound and adding reverb

effects to the sound.

[TOUCH] button ............................................ page 19

For adjusting the touch response.

[I. A. CONTROL] button................................ page 16

For adjusting the sound quality depending on the master

volume.

[USB TO DEVICE] terminal .......................... page 47

For connecting the instrument to a USB storage device,

allowing you to copy the recorded data in the instrument to

the device or play back data stored in the device.

A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3

11

Introduction

Panel Controls

F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7

(CLP-470/440/S408/S406)

CLP-470/440/430

CLP-465GP

CLP-S408/S406

Pedals

(page 18)

Music rest

(page 13)

(CLP-470/440)

Music braces

(page 14)

Key cover

(page 12)

[PHONES] jacks,

[SPEAKER] switch

(page 17)

I/O connectors

(page 45)

Pedals

(page 18)

I/O connectors

(page 45)

[PHONES] jacks,

[SPEAKER] switch

(page 17)

Key cover

(page 12)

Music rest

(page 13)

Music rest

(page 13)

Music braces

(page 14)

Key cover

(page 12)

[AC IN] connector

(page 15)

Pedals

(page 18)

[PHONES] jacks

(page 17)

I/O connectors

(page 45)

Lid

(page 14)

12

Introduction

Getting Started — Playing the Clavinova as a Piano

With the full set of pedals and expressive keyboard, this instrument can be played just like a real acoustic

piano. This section shows you how to simply set up the instrument and play it. It also shows you how to use

the built-in metronome, convenient for practice purposes. We’ve also included for your piano-playing

pleasure “50 greats for the Piano,” a score book to help you master the instrument.

CAUTION

• Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching

fingers (yours or others, especially children’s) between the cover and the unit.

• Do not place objects such as a piece of metal or paper on top of the key cover. Small objects placed on the key cover may fall inside the

unit when the cover is opened and may be nearly impossible to remove. This could cause electric shock, short circuit, fire or other

serious damage to the instrument.

NOTICE

• Disconnect the optional USB storage device connected to the [USB TO DEVICE] terminal before closing the key cover. Closing the cover

with the device still connected may damage the device.

• (CLP-S408/S406) When transporting the instrument, cover the entire keyboard with the protective sheet (pages 76, 80) before closing the

key cover. The sheet will protect the keyboard from being scratched.

To open the ke y cover :

Lift the cover slightly, then push and slide it to the end completely so that

both the panel buttons and keyboard are visible. In this condition, you can

make various panel operations such as Voice selection and Song recording/

playback as well as playing the keyboard.

To close the key cover :

Slide the cover toward you and gently lower the cover over the keys.

You can open the key cover so that only the keyboard appears. This hides

the “electronic” panel controls and lets you feel as if you’re playing an actual

acoustic piano.

To open the ke y cover :

1. Hold the front edge of the key cover top with both hands, then open

the key cover slowly.

2. Close the edge of the key cover. (Fold it down so that it is flat with

the cover.)

To close the key cover :

1. If the music rest is unfolded, fold it back.

2. Unfold the edge of the key cover.

3. Hold the key cover with both hands and close it slowly.

Key Cover

470 440 430 S408 S406 465GP

Be careful to avoid catching your fingers

when opening or closing the cover.

13

Introduction

Getting Started — Playing the Clavinova as a Piano

To raise the music rest:

1. Pull the music rest up and toward yourself as far as it will go.

2. Flip down the two metal supports at the left and right on the

rear of the music rest.

3. Lower the music rest so that it rests on the metal supports.

To lower the music rest:

1. Pull the music rest toward yourself as far as it will go.

2. Raise the two metal supports (at the rear of the music rest).

3. Gently lower the music rest backward until it is all the way

down.

CAUTION

Do not try to use the music rest in a half-raised position. Also, when raising or

lowering the music rest, do not release your hands from the music rest until it

is all the way up or down.

Unfold the music rest:

When opening the key cover, unfold the music rest.

Fold the music rest:

When closing the key cover, fold the music rest.

Music Rest

470 440 430 S408 S406 465GP

14

Introduction

Getting Started — Playing the Clavinova as a Piano

These braces are for holding the pages of music books in place.

CAUTION

• Make sure that the end of the stay fits securely in the lid recess. If the stay is not properly seated in the recess, the lid may fall, causing

damage or injury.

• Be careful that you or others do not bump the stay while the lid is raised. The stay may be bumped out of the lid recess causing the lid to

fall.

• Be careful to avoid catching fingers (yours or others, especially children's) when raising or lowering the lid.

To open the lid:

1. Raise and hold the right side of the lid (viewed from the

keyboard end of the instrument).

2. Raise the lid stay and carefully lower the lid so that the end of

the stay fits into the recess in the lid.

To close the lid:

1. Hold the lid stay and carefully raise the lid.

2. Hold the lid in its raised position and lower the lid stay.

3. Carefully lower the lid.

Music Braces

470 440 430 S408 S406 465GP

Lid

470 440 430 S408 S406 465GP

To open To close

15

Introduction

Getting Started — Playing the Clavinova as a Piano

1. Connect the power cord.

First insert the plug of the power cable into the AC connector on the Clavinova, then plug the other

end of the cable into the proper AC outlet on the wall. In some areas a plug adaptor may be provided to

match the pin configuration of the AC wall outlets in your area. For more information on connecting

the power cord, refer to the assembly instructions on page 69.

WARNING

Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used (voltage rating appears on the

name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom panel of the main keyboard unit

near the AC IN. Make sure that the voltage selector is set for the voltage in your area. Connecting the unit to the wrong AC supply

can cause serious damage to the internal circuitry and may even pose a shock hazard!

Use only the AC power cord supplied with your instrument. If the supplied cord is lost or damaged and needs to be replaced,

contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!

The type of AC power cord provided with your instrument may be different depending on the country in which it is purchased. (In

some areas a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.) Do NOT modify the

plug provided with your instrument. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

2. Turn the power on.

Press the [ ] power switch located on the right of the keyboard to turn the power on.

The display located in the center of the front panel and the power indicator located below the left end

of the keyboard lights up.

Power indicator

If you close the key cover without turning the power off, the power indicator remains lit, indicating that the power is still on.

When you’re ready to turn off the power, press the power switch again.

The display and the power indicator turn off.

CAUTION

Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you are not using the

instrument for a long time or during electrical storms, make sure you unplug the AC power plug from the wall AC outlet.

Turning the power on

1-1 1-2

The shape of the plug

differs depending on the

locale.

Power indicator

Power switch

Display

Normally indicates tempo

16

Introduction

Getting Started — Playing the Clavinova as a Piano

To adjust the volume, use the [MASTER VOLUME] slider located at the left of

the panel. Play the keyboard to actually produce sound while you adjust the

volume.

MASTER VOLUME: The volume level of the entire keyboard sound.

CAUTION

Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you are not using the

instrument for a long time or during electrical storms, make sure you unplug the AC power plug from the wall AC outlet.

NOTE

Adjusting the [MASTER VOLUME] slider also affects the output level of the [PHONES] jacks and the output level of the AUX OUT jack.

I.A. Control (Intelligent Acoustic Control)

I.A. Control is a function which automatically adjusts and controls the sound quality

according to the overall volume of the instrument. Even when the volume is low, it

permits both low sounds and high sounds to be clearly heard.

Pressing the [I.A. CONTROL] button turns the function on and off. When it is on, the

lamp lights. I.A. Control is effective only from the sound output of the instrument

speakers.

Adjusting I. A. Control Depth

The depth of I. A. Control can be adjusted by holding down the [I. A. CONTROL] button and

simultaneously using the [-/NO] [+/YES] buttons. The range is from -3 to 3. The higher the value, the more

clearly that low and high sounds are heard at lower volume levels. The current setting appears on the display

while the [I. A. CONTROL] button is held.

The default setting (0) can be recalled by holding down the [I. A. CONTROL] button and simultaneously

pressing the [-/NO] and [+/YES] buttons together.

Setting the volume — [MASTER VOLUME]

Increases the

level.

Decreases the

level.

17

Introduction

Getting Started — Playing the Clavinova as a Piano

Connect a pair of headphones to one of the [PHONES] jacks.

Two [PHONES] jacks are provided. You can connect two sets of

standard stereo headphones. (If you are using only one pair of

headphones, you can plug them into either of these jacks.)

CAUTION

Do not use headphones at a high volume for an extended period of time. Doing so may

cause hearing loss.

Optional headphones

HPE-160 Yamaha headphones.

Using the headphone hanger

You can hang the headphones on the instrument. Install the

headphone hanger using included two screws (4 x 10mm) as shown

in the illustration.

NOTICE

Do not hang anything other than the headphones on the hanger. Doing so may damage the

instrument or the hanger.

The [SPEAKER] switch turns the internal speakers on or off.

NORMAL ..... The speakers produce sound as long as a pair of headphones is

not connected.

ON .................The speakers always produce sound.

OFF................The speakers produce no sound.

Using headphones

Switching the speakers on/off

470 440 430 S408 S406 465GP

Bottom surface

Standard

stereo

phone plug

18

Introduction

Getting Started — Playing the Clavinova as a Piano

The Clavinova has three foot pedals: damper pedal

(right), sostenuto pedal (center), and soft pedal (left)

that produce a range of expressive effects similar to

those produced by the pedals on an acoustic piano.

Damper (Right) Pedal

When this pedal is pressed, the sound is sustained,

even when the keys are released. When this is used

with one of the Grand Piano Voices, a special

resonance effect is added, which effectively

reproduces the rich, resonant sound of the frame and

soundboard of a real acoustic piano. The depth of this

resonance effect can be set in the Function parameters

(page 51).

Half-pedal function

This instrument also has a Half-pedal function which allows you to use half-damper techniques, in which the

damper is pressed somewhere between all the way down and all the way up. In this half-damper state (on a

real piano), the damper felts only partially mute the strings. The Half-pedal function on the Clavinova lets

you delicately and expressively control the damper muting, and create subtle nuances in your performance. It

also lets you finely control the point at which pressure on the pedal affects the damper muting. (See the

Function mode parameters on page 51.)

This special pedal (only on the CLP-470/S408) has been designed to provide enhanced tactile response and,

when pressed, is much closer in feel to the pedal of an actual grand piano. It makes it easier to physically

experience the half-pedal point and more easily apply the half-pedal effect than other pedals. Since the

pressing sensation may vary depending on the situation, including the location where the instrument is

installed, you may want to adjust the half-pedal point to the desired setting (page 51).

Sostenuto (Center) Pedal

If you play a note or chord on the keyboard and press

the sostenuto pedal while holding the note(s), the notes

will sustain as long as the pedal is held. Organ, string

and choir Voices will continue to sound for as long as

the sostenuto pedal is depressed. All subsequent notes

will not sustain.

Soft (Left) Pedal

The soft pedal reduces the volume and slightly changes the timbre of notes

played while the pedal is pressed. The soft pedal will not affect notes that are

already playing or sustaining when it is pressed. Press the pedal immediately

before you play the target notes.

Using the pedals

When you press the damper

pedal here, the notes you play

before you release the pedal

have a longer sustain.

NOTE

The pedals are covered with vinyl

covers when shipped from the

factory. If your instrument features

the GP Responsive Damper

Pedal, remove the cover from the

damper pedal for optimum use of

the pedal effect.

GP Responsive Damper Pedal

470 440 430 S408 S406 465GP

NOTE

The center and left pedals can

also be assigned to song start/

pause operation ([PLAY/PAUSE]

function) in the Function mode

(page 51).

When you press the sostenuto

pedal here while holding the

note, the note will sustain as

long as you hold the pedal.

NOTE

When you select the Jazz Organ

Voice, the ROTARY SP of the

[EFFECT] section (page 25) is

automatically selected and the

Left pedal functions to switch the

rotary speed of the rotary speaker.

19

Introduction

Getting Started — Playing the Clavinova as a Piano

You can select four different types of keyboard touch sensitivity by pressing the [TOUCH] button. Select one

to match different playing styles and preferences.

HARD ........... Requires that the keys be played quite hard to produce maximum

loudness.

MEDIUM ..... Produces a fairly “standard” keyboard response.

SOFT .............Allows maximum loudness to be produced with relatively light

key pressure.

FIXED........... All notes are produced at the same volume no matter how hard the

keyboard is played. (No indicators are lit.) The fixed volume can

be changed.

Changing the volume when FIXED is selected

The volume in FIXED mode can be changed by using the

[-/NO] [+/YES] buttons while holding down the [TOUCH]

button. The volume range is from 1 through 127. The

current volume level appears on the display while the

[TOUCH] button is held.

The default setting (64) can be recalled by pressing the

[-/NO] and [+/YES] buttons together while holding down

the [TOUCH] button.

Adjusting the touch sensitivity — [TOUCH]

[−/NO][+/YES] [TOUCH]

NOTE

This setting does not change the

weight of the keyboard.

Default setting: MEDIUM

NOTE

The touch sensitivity type will

become the common setting for

all Voices. However, the touch

sensitivity settings may have little

or no effect with certain Voices

that are not normally responsive

to keyboard dynamics. (Refer to

the “Preset Voice List” on page

64.)

NOTE

The touch volume set in FIXED

mode will become the common

setting for all Voices.

Setting range: 1 (minimum

volume) – 127 (maximum volume)

Default setting: 64

Volume

20

Introduction

Getting Started — Playing the Clavinova as a Piano

This instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient for

practicing.

1. Start the metronome.

The metronome sound is turned on by pressing the

[METRONOME] button.

Adjusting the tempo

Press the [TEMPO/FUNCTION] button (the indicator lights). The tempo

of the metronome can be set from 5 to 500 beats per minute by using the

[TEMPO/FUNCTION ] buttons.

The default setting (120) can be recalled by pressing both the [] and []

buttons simultaneously.

Adjusting the time signature

The time signature (beat) of the metronome can be

set by simultaneously holding down the

[METRONOME] button and using the

[-/NO]/[+/YES] buttons. You can set the beat from 0

to 15. The current setting appears on the display while the

[METRONOME] button is held.

The first beat is accented with a bell sound and the rest with clicks. When

the time signature is set to “0,” clicks sound on all beats.

The default setting (0) can be recalled by pressing the [-/NO] and [+/YES]

buttons together while holding down the [METRONOME] button.

2. Stop the metronome.

Turn off the metronome by pressing the [METRONOME] button.

Using the metronome — [METRONOME]

12

[−/NO][+/YES]

[TEMPO/FUNCTION ]

NOTE

The volume of the metronome can

be adjusted in the Function mode

(page 51).

The beat indicator

flashes at the current

tempo.

NOTE

The default settings of tempo and

time signature for MIDI Songs

differ depending on the Songs.

When you select a MIDI Song, the

setting here will be canceled and

the original tempo and the time

signature for the selected Song

will be called up.

Beat

Страница загружается...

Yamaha CLP-470 Инструкция по применению

Похожие модели бренда

Модели других брендов