Kenwood DPX-3000U Руководство пользователя

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

DPX-3000U

DUAL DIN SIZED CD RECEIVER

INSTRUCTION MANUAL

DUALER DIN-GENORMTER CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-РЕСИВЕР РАЗМЕРА 2DIN

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

ПРИЙМАЧ CD ПОДВІЙНОГО DIN-РОЗМІРУ

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

JS_KWD_DPX_3000U_EN_C00_1.indd 1JS_KWD_DPX_3000U_EN_C00_1.indd 1 2/10/2015 11:23:35 AM2/10/2015 11:23:35 AM

i

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Information on Disposal of Old Electrical and Electronic Equipment and Batteries

(applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as

household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of

handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper

recycling and waste disposal will help conserve resources whilst preventing detrimental effects

on our health and the environment.

Notice:

The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien

(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist

darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf,

sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten

und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und

die Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere

Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den

kommunalen Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei

enthalt.

For Israel

Declaration of Conformity with regard to the EMC Directive

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die EMC-Vorschrift

Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Декларация соответствия относительно Директивы Электромагнитная

совместимость

Декларация соответствия относительно Директивы 2011/65/EU об ограничении

содержания вредных веществ

Производитель:

ДжейВиСи КЕНВУД Корпорейшн

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви.

Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

Декларація про відповідність вимогам Директиви EMC

Декларація про відповідність вимогам Директиви RoHS 2011/65/EU

Виробник:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Представник у ЕС:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

JS_KWD_DPX_3000U_EN_S00_1.indd iJS_KWD_DPX_3000U_EN_S00_1.indd i 2/10/2015 10:23:46 AM2/10/2015 10:23:46 AM

ii

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that

have been classified as Class1. It means that the unit is utilizing laser beams that are of a

weaker class. There is no danger of hazardous radiation outside the unit.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente

Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf

hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören.

Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche

Strahlungen außerhalb des Geräts besteht.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует

лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи

слабой интенсивности. Они не представляют опасности и не распространяют опасную

радиацию вне устройства.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє

лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені

слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin

Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün

toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak

atılamaz.

Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri

dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın

geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin.

Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki

zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок

службы (годности) данного товара “по истечении которого он может представлять

опасность для жизни, здоровья потребителя, причинять вред его имуществу или

окружающей среде” составляет семь (7) лет со дня производства. Этот срок является

временем, в течение которого потребитель данного товара может безопасно им

пользоваться при условии соблюдения инструкции по эксплуатации данного товара,

проводя необходимое обслуживание, включающее замену расходных материалов и/или

соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляемые вместе с

ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических

материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других

прав потребителя, в частности, гарантийного свидетельства KENWOOD, которое он может

получить в соответствии с законом о правах потребителя или других законов, связанных

с ним.

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження

Використання деяких Небезпечних Речовин в електричному та електронному

обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких

Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

1. свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на

мільйон;

2. кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на

мільйон;

3. ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на

мільйон;

4. шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до

1000 частин на мільйон;

5. полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000

частин на мільйон;

6. полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації

до 1000 частин на мільйон.

JS_KWD_DPX_3000U_EN_S00_1.indd iiJS_KWD_DPX_3000U_EN_S00_1.indd ii 2/10/2015 10:23:46 AM2/10/2015 10:23:46 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

2

CONTENTS BEFORE USE

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important

that you read and observe Warning and Caution in this manual.

• Please keep the manual in a safe and accessible place for future reference.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of

the output level.

General:

• Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short

circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to

evaporate.

• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the

antenna control wire connected (



17

). Turn off the unit or change the source to STANDBY when parking at

a low ceiling area.

How to read this manual

• Operations are explained mainly using buttons on the faceplate.

• English indications are used for the purpose of explanation. You can select the display language from the

[

FUNCTION

] menu. ( 

5

)

• [

XX

] indicates the selected items.

• (



XX

) indicates references are available on the stated page.

BEFORE USE 2

BASICS 3

GETTING STARTED 4

1 Select the display language

and cancel the demonstration

2 Set the clock and date

3 Set the initial settings

RADIO 5

AUX 7

CD / USB / iPod / ANDROID 7

AUDIO SETTINGS 10

DISPLAY SETTINGS 11

TROUBLESHOOTING 12

REFERENCES 13

Maintenance

More information

SPECIFICATIONS 14

INSTALLATION /

CONNECTION 15

JS_KWD_DPX_3000U_EN_EN_3.indd 2JS_KWD_DPX_3000U_EN_EN_3.indd 2 20/10/2015 11:32:48 AM20/10/2015 11:32:48 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

3

BASICS

To On the faceplate

Turn on the power

Press

.

• Press and hold to turn off the power.

Adjust the volume Turn the volume knob.

Select a source

Press

repeatedly.

Change the display information Press DISP repeatedly. (



14

)

Faceplate

ENGLISH

Display window

Reset button

• Your preset adjustments will be

erased except stored radio stations.

Volume knob

Loading slot

JS_KWD_DPX_3000U_EN_EN_4.indd 3JS_KWD_DPX_3000U_EN_EN_4.indd 3 4/11/2015 9:58:00 AM4/11/2015 9:58:00 AM

4

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows:

“SEL LANGUAGE”

“PRESS” “VOLUME KNOB”

1 Turn the volume knob to select [

ENG

] (English), [

RUS

] (Russian) or

[

SPA

](Spanish), then press the knob.

[

ENG

] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO”

“PRESS” “VOLUME KNOB”.

2 Press the volume knob.

[

YES

] is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

Set the clock and date

1

Press the volume knob to enter [

FUNCTION

].

2 Turn the volume knob to select [

CLOCK

], then press the knob.

To adjust the clock

3 Turn the volume knob to select [

CLOCK ADJUST

], then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Hour

Minute

5 Turn the volume knob to select [

CLOCK FORMAT

], then press the knob.

6 Turn the volume knob to select [

12H

] or [

24H

], then press the knob.

1

To set the date

7 Turn the volume knob to select [

DATE FORMAT

], then press the

knob.

8 Turn the volume knob to select [

DD/MM/YY

] or [

MM/DD/YY

], then

press the knob.

9 Turn the volume knob to select [

DATE SET

], then press the knob.

10 Turn the volume knob to make the settings, then press the

knob.

Day

Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press .

Set the initial settings

1

Press repeatedly to enter STANDBY.

2 Press the volume knob to enter [

FUNCTION

].

• Pressing enter [

AUDIO CONTROL

] directly.

3 Turn the volume knob to select an item (see the following

table), then press the knob.

4 Repeat step 3 until the desired item is selected or activated.

5 Press and hold to exit.

To return to the previous setting item, press .

Default:

XX

AUDIO CONTROL

SWITCH

PREOUT

REAR

/

SUBWOOFER

: Selects whether rear speakers or a subwoofer

are connected to the line out terminals on the rear (through an

external amplifier).

SP SELECT OFF

/

5/4

/

6 × 9/6

/

OEM

: Selects according to the speaker size

(5inches or 4inches, 6×9inches or 6inches) or OEM speakers for

optimum performance.

3

2

JS_KWD_DPX_3000U_EN_EN_3.indd 4JS_KWD_DPX_3000U_EN_EN_3.indd 4 20/10/2015 11:32:49 AM20/10/2015 11:32:49 AM

ENGLISH

5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

DISPLAY

EASY MENU

When entering [

FUNCTION

]...

ON

:ZONE1 and ZONE2 illuminations change to white color.;

OFF

:ZONE2 illumination changes to

white color while ZONE1 illumination remains as [

COLOR



SELECT

] color. ( 

11

)

(Refer to the illustration on page 11 for zone identification.)

TUNER SETTING

PRESET TYPE

NORMAL

:Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/

LW).;

MIX

:Memorizes one station for each preset button, regardless of the selected band.

SYSTEM

KEY BEEP

ON

:Activates the keypress tone.;

OFF

:Deactivates.

SOURCE SELECT

BUILT-IN AUX

ON

:Enables AUX in source selection.;

OFF

:Disables. ( 

7

)

P-OFF WAIT

Applicable only when the demonstration mode is turned off.

Sets the duration when the unit will automatically turn off (while in standby mode) to save the

battery.

20M

: 20minutes;

40M

: 40minutes;

60M

: 60minutes;

– – –

:Cancels

CD READ 1

:Automatically distinguishes between audio file disc and music CD.;

2

:Forces to play as a music

CD. No sound can be heard if an audio file disc is played.

F/W UPDATE

UPDATE SYSTEM

F/W UP xx.xx

YES

:Starts upgrading the firmware.;

NO

:Cancels (upgrading is not activated).

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

CLOCK

CLOCK DISPLAY

ON

:The clock time is shown on the display even when the unit is turned off.;

OFF

:Cancels.

ENGLISH

Select the display language for [

FUNCTION

] menu and music information if applicable.

By default, [

ENGLISH

] is selected.

РУССКИЙ

ESPANOL

GETTING STARTED RADIO

Search for a station

1

Press repeatedly to select TUNER.

2 Press repeatedly to select FM1/ FM2/

FM3/ AM.

3 Press S/T to search for a station.

• To change the searching method for S/T:

Press repeatedly.

AUTO1 : Automatically search for a station.

AUTO2 : Search for a preset station.

MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number

buttons (1to6).

• To select a stored station: Press one of the number

buttons (1to6).

JS_KWD_DPX_3000U_EN_EN_3.indd 5JS_KWD_DPX_3000U_EN_EN_3.indd 5 23/10/2015 3:00:14 PM23/10/2015 3:00:14 PM

6

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

RADIO

Other settings

1

Press the volume knob to enter [

FUNCTION

].

2 Turn the volume knob to select an item (see the following table), then press

the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

XX

TUNER SETTING

LOCAL SEEK

ON

: Searches only stations with good reception. ;

OFF

: Cancels.

•

Settings made are applicable only to the selected source/station. Once you change

the source/station, you need to make the settings again.

AUTO MEMORY YES

:Automatically starts memorizing 6 stations with good reception.;

NO

:Cancels.

•

Selectable only if [

NORMAL

] is selected for [

PRESET TYPE

]. ( 

5

)

MONO SET ON

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

NEWS SET ON

: The unit will temporarily switch to News Programme if available. ;

OFF

: Cancels.

REGIONAL ON

: Switches to another station only in the specific region using the “AF” control.;

OFF

:Cancels.

AF SET ON

: Automatically searches for another station broadcasting the same program in the

same Radio Data System network with better reception when the current reception is

poor.;

OFF

:Cancels.

TI ON

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights

up).;

OFF

:Cancels.

PTY SEARCH

1

Press the volume knob to enter PTY language selection.

2

Turn the volume knob to select the PTY language (

ENGLISH

/

FRENCH

/

GERMAN

),

then press the knob.

3

Turn the volume knob to select the available Program Type (see the following).

4

Press

S / T

to start searching.

CLOCK

TIME SYNC

ON

:Synchronizes the unit’s time to the Radio Data

System station time.;

OFF

:Cancels.

Available Program Type for PTY SEARCH

SPEECH

:

NEWS

,

AFFAIRS

,

INFO

(information),

SPORT

,

EDUCATE

,

DRAMA

,

CULTURE

,

SCIENCE

,

VARIED

,

WEATHER

,

FINANCE

,

CHILDREN

,

SOCIAL

,

RELIGION

,

PHONE IN

,

TRAVEL

,

LEISURE

,

DOCUMENT

MUSIC

:

POP M

(music),

ROCK M

(music),

EASY M

(music),

LIGHT M

(music),

CLASSICS

,

OTHER M

(music),

JAZZ

,

COUNTRY

,

NATION M

(music),

OLDIES

,

FOLK M

(music)

The unit will search for the Program Type categorized under

[

SPEECH

] or [

MUSIC

] if selected.

• [

LOCAL SEEK

]/ [

MONO SET

]/ [

NEWS SET

]/ [

REGIONAL

]/ [

AF SET

]/ [

TI

]/

[

PTY SEARCH

] is selectable only when the band is FM1/ FM2/

FM3.

• If the volume is adjusted during reception of traffic

information or news bulletin, the adjusted volume is

memorized automatically. It will be applied the next time

traffic information or news bulletin is turned on.

JS_KWD_DPX_3000U_EN_EN_3.indd 6JS_KWD_DPX_3000U_EN_EN_3.indd 6 20/10/2015 11:32:49 AM20/10/2015 11:32:49 AM

ENGLISH

7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

*

1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*

2

Do not leave the cable inside the car when not using.

*

3

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is

shown. Follow the instructions to install the application. You can also install the latest version of

KENWOOD MUSIC PLAY application on your Android device before connecting. (



13

)

AUX

Preparation:

Select [

ON

] for [

BUILT-IN AUX

]. ( 

5

)

Start listening

1

Connect a portable audio player (commercially available).

2 Press repeatedly to select AUX.

3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [

FUNCTION

].

2 Turn the volume knob to select [

SYSTEM

], then press the

knob.

3 Turn the volume knob to select [

AUX NAME SET

], then press the

knob.

4 Turn the volume knob to select an item, then press the

knob.

AUX

(default)/

DVD

/

PORTABLE

/

GAME

/

VIDEO

/

TV

5 Press and hold to exit.

To return to the previous setting item, press .

Auxiliary input jack

Portable audio player

3.5mm stereo mini plug with “L” shaped

connector (commercially available)

Label side

M

Eject disc

USB input terminal

CA-U1EX (max.: 500mA) (optional accessory)

Micro USB 2.0 cable

*

2

(commercially available)

KCA-iP102 / KCA-iP103 (optional accessory)

*

1

or accessory cable of the iPod/iPhone

*

2

USB

iPod/iPhone

ANDROID

*

3

JS_KWD_DPX_3000U_EN_EN_3.indd 7JS_KWD_DPX_3000U_EN_EN_3.indd 7 20/10/2015 11:32:49 AM20/10/2015 11:32:49 AM

8

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD / USB / iPod / ANDROID

To On the faceplate

Playback / pause Press .

Reverse / Fast-forward

*

4

Press and hold S/T.

Select a track/file

Press S/T.

Select a folder

*

5

Press J/K.

Repeat play

*

6

Press repeatedly.

TRACK REPEAT

/

ALL REPEAT

: Audio CD

FILE REPEAT

/

FOLDER REPEAT

/

ALL REPEAT

: MP3/WMA/WAV/FLAC file

FILE REPEAT

/

FOLDER REPEAT

/

REPEAT OFF

: iPod or ANDROID

Random play

*

6

Press repeatedly.

DISC RANDOM

/

RANDOM OFF

: Audio CD

FOLDER RANDOM

/

RANDOM OFF

: MP3/WMA/WAV/FLAC file, iPod or

ANDROID

Press and hold

to select

ALL RANDOM

.

*

7

*

4

For ANDROID: Applicable only when [

BROWSE MODE

] is selected.

*

5

For CD: Only for MP3/WMA files. This does not work for iPod/ ANDROID.

*

6

For iPod/ ANDROID: Applicable only when [

MODE OFF

]/ [

BROWSE MODE

] is selected.

*

7

For CD: Only for MP3/WMA files.

Select control mode

While in IPOD source, press iPod USB

repeatedly.

MODE ON

: Control iPod using the iPod itself.

However, you can still play/pause, file

skip, fast-forward or reverse from this

unit.

MODE OFF

: Control iPod from this unit.

While in ANDROID source, press iPod USB

repeatedly.

BROWSE MODE

: Control Android device from

this unit via KENWOOD MUSIC

PLAY application installed in the

Android device.

HAND MODE

: Control Android device using the

Android device itself via other

media player applications installed

in the Android device. However,

you can still play/pause and file

skip from this unit.

Select music drive

Press iPod USB repeatedly.

Stored songs in the following drive will be played

back.

• Selected internal or external memory of a

smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

To directly select USB/

IPOD/ ANDROID source,

press iPod USB.

JS_KWD_DPX_3000U_EN_EN_3.indd 8JS_KWD_DPX_3000U_EN_EN_3.indd 8 20/10/2015 11:32:50 AM20/10/2015 11:32:50 AM

ENGLISH

9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD / USB / iPod / ANDROID

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the

iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Select a file from a folder/list

1

Press .

2 Turn the volume knob to select a folder/list, then press the knob.

3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files in the iPod, you can search through them

quickly according to the first character of the file name.

Turn the volume knob quickly to enter character search.

Turn the volume knob to select the character.

To search for a character other than A to Z and 0to9, enter only

“

*

”.

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press 5.

• To return to the previous setting item, press

.

• To cancel, press and hold

.

• For iPod, applicable only when [

MODE OFF

] is selected.

( 

8

)

• For ANDROID, applicable only when [

BROWSE MODE

] is selected. ( 

8

)

Other settings

1

Press the volume knob to enter [

FUNCTION

].

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

XX

USB

MUSIC DRIVE DRIVE CHANGE

:The next drive ([

DRIVE 1

] to [

DRIVE 5

]) is selected

automatically and playback starts.

Repeat steps

1

to

3

to select the following drives.

SKIP SEARCH 0.5%

/

1%

/

5%

/

10%

: While listening to iPod or ANDROID, selects the

skip search ratio over the total files.

JS_KWD_DPX_3000U_EN_EN_3.indd 9JS_KWD_DPX_3000U_EN_EN_3.indd 9 20/10/2015 11:32:50 AM20/10/2015 11:32:50 AM

10

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

While listening to any source...

1 Press to enter [

AUDIO CONTROL

] directly.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

XX

SUB-W LEVEL –15

to

+15

(

0

) Adjusts the subwoofer output level.

BASS LEVEL –8

to

+8

(

+2

)

Adjusts the level to memorize for each source.

(Before making an adjustment, select the source you

want to adjust.)

MID LEVEL –8

to

+8

(

+1

)

TRE LEVEL –8

to

+8

(

+1

)

EQ PRO

(This setting is stored to [

USER

].)

BASS ADJUST BASS CTR FRQ 60HZ

/

80HZ

/

100HZ

/

200HZ

: Selects the center

frequency.

BASS LEVEL –8

to

+8

(

+2

):Adjusts the level.

BASS Q FACTOR 1.00

/

1.25

/

1.50

/

2.00

:Adjusts the quality factor.

BASS EXTEND ON

:Turns on the extended bass.;

OFF

:Cancels.

MID ADJUST MID CTR FRQ 0.5KHZ

/

1.0KHZ

/

1.5KHZ

/

2.5KHZ

:Selects the

center frequency.

MID LEVEL –8

to

+8

(

+1

):Adjusts the level.

MID Q FACTOR 0.75

/

1.00

/

1.25

:Adjusts the quality factor.

TRE ADJUST TRE CTR FRQ 10.0KHZ

/

12.5KHZ

/

15.0KHZ

/

17.5KHZ

:Selects

the center frequency.

TRE LEVEL –8

to

+8

(

+1

):Adjusts the level.

PRESET EQ DRIVE EQ

/

TOP40

/

POWERFUL

/

ROCK

/

POPS

/

EASY

/

JAZZ

/

NATURAL

/

USER

:Selects a preset equalizer suitable to the music

genre. (Select [

USER

] to use the settings made in [

EQ PRO

].)

[

DRIVE EQ

] is a preset equalizer that reduces noise outside the car or

running noise of the tyres.

BASS BOOST LEVEL1

/

LEVEL2

/

LEVEL3

:Selects your preferred bass boost level.;

OFF

:Cancels.

LOUDNESS LEVEL1

/

LEVEL2

:Selects your preferred low and high frequencies

boost to produce a well-balanced sound at a low volume level.;

OFF

:Cancels.

SUBWOOFER SET ON

:Turns on the subwoofer output.;

OFF

:Cancels.

LPF SUBWOOFER THROUGH

:All signals are sent to the subwoofer.;

85HZ

/

120HZ

/

160HZ

:Audio signals with frequencies lower than 85Hz/ 120Hz/

160Hz are sent to the subwoofer.

SUB-W PHASE REVERSE

(180°)/

NORMAL

(0°):Selects the phase of the subwoofer

output to be in line with the speaker output for optimum performance.

(Selectable only if a setting other than [

THROUGH

] is selected for

[

LPF SUBWOOFER

].)

FADER R15

to

F15

(

0

):Adjusts the rear and front speaker output balance.

BALANCE L15

to

R15

(

0

):Adjusts the left and right speaker output balance.

VOLUME OFFSET

For AUX:

–8

to

+8

(

0

) ; For other sources:

–8

to

0

:Preset the initial

volume level of each source. (Before adjustment, select the source you

want to adjust.)

SOUND RECNSTR

(Sound

reconstruction)

ON

:Creates realistic sound by compensating the high-frequency

components and restoring the rise-time of the waveform that are lost

in audio data compression.;

OFF

:Cancels.

• [

SUB-W LEVEL

]/ [

SUBWOOFER SET

]/ [

LPF SUBWOOFER

]/ [

SUB-W PHASE

] is

selectable only if [

SWITCH PREOUT

] is set to [

SUBWOOFER

]. ( 

4

)

• [

SUB-W LEVEL

]/ [

LPF SUBWOOFER

]/ [

SUB-W PHASE

] is selectable only if

[

SUBWOOFER SET

] is set to [

ON

].

JS_KWD_DPX_3000U_EN_EN_3.indd 10JS_KWD_DPX_3000U_EN_EN_3.indd 10 20/10/2015 11:32:50 AM20/10/2015 11:32:50 AM

ENGLISH

11

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

DISPLAY SETTINGS

Set the dimmer

Press and hold DISP (DIMMER) to turn on or off the dimmer.

• If you have set [

DIMMER TIME

], it will be canceled once you press and

hold this button.

Other settings

1

Press the volume knob to enter [

FUNCTION

].

2 Turn the volume knob to select [

DISPLAY

], then press the knob.

3 Turn the volume knob to select an item (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

5 Press and hold to exit.

To return to the previous setting item, press .

Default:

XX

COLOR SELECT

Select color for

ALL ZONE

,

ZONE 1

and

ZONE 2

separately.

1

Select a zone. (See illustration on the left column.)

2

Select a color for the selected zone.

VARIABLE SCAN

/

CUSTOM R/G/B

/

preset colors*

To make your own color, select [

CUSTOM R/G/B

]. The color you have

made will be stored in [

CUSTOM R/G/B

].

1

Press the volume knob to enter the detailed color adjustment.

2

Press

S

/

T

to select the color (

R

/

G

/

B

) to adjust.

3

Turn the volume knob to adjust the level (

0

—

9

), then press the

knob.

DIMMER

Dim the display illumination and button illumination.

ON

:Dimmer is turned on.;

OFF

:Cancels.

DIMMER TIME

:Set the dimmer on and off time.

1

Turn the volume knob to adjust the [

ON

] time, then press the knob.

2

Turn the volume knob to adjust the [

OFF

] time, then press the knob.

(Default: [

ON

]:

18:00

; [

OFF

]:

6:00

)

BRIGHTNESS

1

Select a zone. (See illustration on the left column.)

2

0

—

31

: Select your preferred brightness level for display and button

illumination.

TEXT SCROLL AUTO

/

ONCE

:Select whether to scroll the display information

automatically, or scroll only once.;

OFF

:Cancels.

*

Preset colors:

RED1

/

RED2

/

RED3

/

PURPLE1

/

PURPLE2

/

PURPLE3

/

PURPLE4

/

BLUE1

/

BLUE2

/

BLUE3

/

SKYBLUE1

/

SKYBLUE2

/

LIGHTBLUE

/

AQUA1

/

AQUA2

/

GREEN1

/

GREEN2

/

GREEN3

/

YELLOWGREEN1

/

YELLOWGREEN2

/

YELLOW

/

ORANGE1

/

ORANGE2

/

ORANGERED

JS_KWD_DPX_3000U_EN_EN_3.indd 11JS_KWD_DPX_3000U_EN_EN_3.indd 11 20/10/2015 11:32:50 AM20/10/2015 11:32:50 AM

12

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

TROUBLESHOOTING

Symptom Remedy

General

Sound cannot be heard.

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

“MISWIRING CHECK WIRING

THEN PWR ON” appears.

Turn the power off, then check to be sure the terminals

of the speaker wires are insulated properly. Turn the

power on again.

“PROTECTING SEND SERVICE”

appears.

Send the unit to the nearest service center.

The unit does not work at all. Reset the unit. (



3

)

Radio

•

Radio reception is poor.

•

Static noise while listening

to the radio.

Connect the antenna firmly.

CD / USB / iPod

Disc cannot be ejected.

Press and hold

M

to forcibly eject the disc. Be careful

not to drop the disc when it is ejected. If this does not

solve the problem, reset the unit. (



3

)

Noise is generated. Skip to another track or change the disc.

Tracks do not play back as

you intended them to play.

Playback order is determined when files are recorded.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not

correct.

This is caused by how the tracks are recorded.

Correct characters are not

displayed (e.g. album name).

•

This unit can only display uppercase letters,

numbers, and a limited number of symbols.

•

Depending on the display language you have

selected (



5

), some characters may not be

displayed correctly.

“NA FILE”

Make sure the disc contains supported audio files.

( 

13

)

“NO DISC” Insert a playable disc into the loading slot.

“TOC ERROR” Make sure the disc is clean and inserted properly.

“PLEASE EJECT” Reset the unit. If this does not solve the problem,

consult your nearest service center.

Symptom Remedy

CD / USB / iPod

“READ ERROR” Copy the files and folders onto the USB device again. If this

does not solve the problem, reset the USB device or use

another USB device.

“NO DEVICE” Connect a USB device, and change the source to USB again.

“COPY PRO” A copy-protected file is played.

“NA DEVICE”

Connect a supported USB device, and check the connections.

“NO MUSIC” Connect a USB device that contains playable audio files.

“iPod ERROR”

•

Reconnect the iPod.

•

Reset the iPod.

ANDROID

•

Sound cannot

be heard during

playback.

•

Sound output only

from the Android

device.

•

Reconnect the Android device.

•

If in [

HAND MODE

], launch any media player application

on the Android device and start playback.

•

If in [

HAND MODE

], relaunch the current media player

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit. (



13

)

Cannot playback at

[

BROWSE MODE

].

•

Make sure KENWOOD MUSIC PLAY APP is installed on the

Android device. (



7

)

•

Reconnect the Android device and select the appropriate

control mode.

•

If this does not solve the problem, the connected Android

device does not support [

BROWSE MODE

]. ( 

13

)

“NO DEVICE” or

“READING” keeps

flashing.

•

Switch off the developer options on the Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected Android

device does not support [

BROWSE MODE

]. ( 

13

)

Playback is intermittent

or sound skips.

Turn off the power saving mode on the Android device.

“ANDROID ERROR” /

“NADEVICE”

•

Reconnect the Android device.

•

Restart the Android device.

JS_KWD_DPX_3000U_EN_EN_3.indd 12JS_KWD_DPX_3000U_EN_EN_3.indd 12 20/10/2015 11:32:50 AM20/10/2015 11:32:50 AM

ENGLISH

13

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

REFERENCES

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Handling discs

•

Do not touch the recording surface of the disc.

•

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•

Do not use any accessories for the disc.

•

Clean from the center of the disc and move outward.

•

Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

•

When removing discs from this unit, pull them out horizontally.

•

Remove burrs from the center hole and disc edge before inserting a disc.

More information

Visit also the following website <www.kenwood.com/cs/ce/> for:

–

Latest firmware updates and latest compatible item list

–

Android™ application KENWOOD MUSIC PLAY

–

Any other latest information

General

•

This unit can only play the following CDs:

•

Detailed information and notes about the playable audio files are stated in an online manual

on the following website: www.kenwood.com/cs/ce/audiofile/

Playable files

•

Playable audio file: MP3 (.mp3), WMA (.wma)

•

Playable disc media: CD-R/CD-RW/CD-ROM

•

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.

•

Playable USB device file system: FAT12, FAT16, FAT32

Even when audio files comply with the standards listed above, playback may be impossible

depending on the types or conditions of media or device.

Unplayable discs

•

Discs that are not round.

•

Discs with coloring on the recording surface or discs that are dirty.

•

Recordable/ReWritable discs that have not been finalized.

•

8cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•

This unit can play MP3/WMA/WAV/FLAC files stored on a USB mass storage class device.

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.

About iPod/iPhone

Made for

-

iPod touch (2nd, 3rd, 4th, and 5th generation)

-

iPod classic

-

iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

-

iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus

•

You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

•

Depending on the version of the operating system of the iPod/iPhone, some functions may

not operate on this unit.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory

(AOA) 2.0.

•

If the Android device supports both mass storage class device and AOA 2.0, this unit always

playback via AOA 2.0 as priority.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 

17

)

When a call comes in, “CALL” appears.

(The audio system pauses.)

•

To continue listening to the audio system during a call, press . “CALL” disappears

and the audio system resumes.

When the call ends, “CALL” disappears.

(The audio system resumes.)

JS_KWD_DPX_3000U_EN_EN_3.indd 13JS_KWD_DPX_3000U_EN_EN_3.indd 13 20/10/2015 11:32:50 AM20/10/2015 11:32:50 AM

14

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

REFERENCES

Change the display information

Each time you press

DISP

, the display information changes.

•

If the information is unavailable or not recorded,

“NO TEXT”, “NO INFO”, or other information

(eg. station name, playing time) appears.

Source name Display information

STANDBY

Source name (Date/Clock)

TUNER

Frequency (Date/Clock)

(For FM Radio Data System stations only)

Station name (Date/Clock) Radio text (Date/Clock) Radio text+

(R.TEXT+)

Title (Artist) Title (Date/Clock) Frequency (Date/Clock)

(back to the beginning)

CD or USB

(For CD-DA)

Track title (Artist) Track title (Disc name) Track title (Date/Clock)

Playing time (Date/Clock)

(back to the beginning)

(For MP3/WMA/WAV/FLAC files)

Track title (Artist) Track title (Album title) Track title (Date/Clock)

File name (Folder name)

File name (Date/Clock) Playing time

(Date/Clock)

(back to the beginning)

IPOD or ANDROID

Track title (Artist) Track title (Album name) Track title (Date/Clock)

Playing time (Date/Clock)

(back to the beginning)

AUX

Source name (Date/Clock)

SPECIFICATIONS

Tuner

FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space)

Usable Sensitivity (S/N=26dB) 0.71μV/75Ω

Quieting Sensitivity

(DINS/N=46dB)

2.0μV/75Ω

Frequency Response (±3dB) 30 Hz — 15 kHz

Signal-to-Noise Ratio (MONO) 64 dB

Stereo Separation (1kHz) 40dB

MW Frequency Range 531kHz — 1611kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 28.2μV

LW Frequency Range 153kHz — 279kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 50.0μV

CD player

Laser Diode GaAIAs

Digital Filter (D/A) 8 times over sampling

Spindle Speed 500rpm — 200rpm (CLV)

Wow & Flutter Below measurable limit

Frequency Response (±1dB) 20Hz — 20kHz

Total Harmonic Distortion (1kHz) 0.01%

Signal-to-Noise Ratio (1kHz) 105 dB

Dynamic Range 90dB

Channel Separation 85dB

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

JS_KWD_DPX_3000U_EN_EN_3.indd 14JS_KWD_DPX_3000U_EN_EN_3.indd 14 20/10/2015 11:32:50 AM20/10/2015 11:32:50 AM

ENGLISH

15

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

SPECIFICATIONS INSTALLATION / CONNECTION

USB

USB Standard USB1.1, USB2.0 Full Speed

File System FAT12/16/32

Maximum Supply Current DC5V

1A

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

WAV Decode Linear-PCM

FLAC Decode FLAC file (Up to 48kHz / 16bit)

Audio

Maximum Output Power 50W×4

Full Bandwidth Power 22W×4 (at less than 1% THD)

Speaker Impedance 4Ω—8Ω

Tone Action Bass 100Hz±8dB

Middle 1.0kHz±8dB

Treble 12.5kHz±8dB

Preout Level/Load (CD) 2500mV/10kΩ

Preout Impedance ≤600Ω

Auxiliary



Frequency Response (±3dB) 20Hz—20kHz

Input Maximum Voltage 1000mV

Input Impedance 30kΩ

General



Operating Voltage 14.4V (10.5V—16V allowable)

Maximum Current Consumption 10A

Operational Temperature Range –10°C—+60°C

Installation Size (W×H×D) 182mm×111mm×158mm

Weight 1.6kg

Subject to change without notice.

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire

(black) to prevent a short circuit.

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during

and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the

[

wires of speakers to the car chassis or Ground wire (black), or connect

them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)

to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned

on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are

working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old

fuse with one that has the same rating.

Basic procedure

1

Remove the key from the ignition switch, then disconnect the [

terminal of the car battery.

2 Connect the wires properly.

See Wiring connection. (



17

)

3 Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the [ terminal of the car battery.

5 Reset the unit. ( 

3

)

JS_KWD_DPX_3000U_EN_EN_3.indd 15JS_KWD_DPX_3000U_EN_EN_3.indd 15 20/10/2015 11:32:51 AM20/10/2015 11:32:51 AM

16

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

When installing without the mounting sleeve

1

Remove the mounting sleeve and trim plate

from the unit.

2 Align the holes in the unit (on both sides) with

the vehicle mounting bracket and secure the

unit with screws (commercially available).

Use only the specified screws. Using wrong screws might

damage the unit.

How to remove the unit

1

Fit the catch pin on the extraction keys into

the holes on both sides of the trim plate, then

pull it out.

2 Insert the extraction keys deeply into the slots

on each side, then follow the arrows as shown

below.

Do the required wiring.

(



17

)

Dashboard of your car

Bend the appropriate tabs to hold the

mounting sleeve firmly in place.

Installing the unit (in-dash mounting)

Part list for installation

(A)

Mounting sleeve

(B)

Trim plate

(C)

Wiring harness

(D)

Extraction key

JS_KWD_DPX_3000U_EN_EN_3.indd 16JS_KWD_DPX_3000U_EN_EN_3.indd 16 20/10/2015 3:58:57 PM20/10/2015 3:58:57 PM

ENGLISH

17

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

REMOTE CONT

STEERING WHEEL

REMOTE INPUT

P. CONT

ANT CONT

MUTE

Wiring connection

Fuse (10A)

Antenna terminal

Light blue/yellow

(Steering remote control

wire)

To the steering wheel remote control

adapter

Blue/White

(Power control wire/

Antenna control wire)

Brown

(Mute control wire)

To the power control terminal when

using the optional power amplifier

or to the antenna control terminal in

the vehicle

To the terminal that is grounded

when the telephone rings or during

conversation (



13

)

(To connect the Kenwood navigation

system, refer your navigations

manual.)

Yellow (A4)

Red (Ignition wire)

Red (A7)

Yellow (Battery wire)

Color and function

A4 Yellow : Battery

A5 Blue/White : Power control

A7 Red : Ignition (ACC)

A8 Black : Earth (ground) connection

B1

Purple

]

: Rear speaker (right)

B2

Purple/black

[

B3

Gray

]

: Front speaker (right)

B4

Gray/black

[

B5

White

]

: Front speaker (left)

B6

White/black

[

B7

Green

]

: Rear speaker (left)

B8

Green/black

[

ISO connectors

Connecting the ISO connectors on some VW/Audi or

Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied

wiring harness as illustrated below.

Unit

Vehicle

A7 (Red)

Ignition wire

(Red)

A4 (Yellow)

Default wiring

Battery wire

(Yellow)

If no connections are made, do not let the wire come out from the tab.

Front/ Rear/subwoofer output

When connecting to an external amplifier, connect

its ground wire to the car’s chassis to avoid damaging

the unit.

If your car does not have an ISO terminal :

We recommend installing the unit with a

commercially available custom wiring harness

specific for your car and leave this job to professionals

for your safety. Consult your car audio dealer.

JS_KWD_DPX_3000U_EN_EN_3.indd 17JS_KWD_DPX_3000U_EN_EN_3.indd 17 20/10/2015 11:32:51 AM20/10/2015 11:32:51 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

2

INHALT VOR DER INBETRIEBNAHME

WICHTIG

•

Um richtige Verwendung sicherzustellen, lesen Sie die Bedienungsanleitung vor der Verwendung des Produkts sorgfältig durch.

Es ist besonders wichtig, dass Sie die als Warnung und Vorsicht gekennzeichneten Hinweise in dieser Anleitung lesen und

beachten.

•

Bitte bewahren Sie die Anleitung an sicherer Stelle und griffbereit zum Nachschlagen auf.

Warnung

Bedienen Sie keine Funktion, die Ihre Aufmerksamkeit vom Straßenverkehr ablenkt.

Vorsicht

Lautstärkeeinstellung:

•

Stellen Sie die Lautstärke so ein, dass Sie immer noch Geräusche von außerhalb des Fahrzeugs hören können, um Unfälle zu

vermeiden.

•

Senken Sie die Lautstärke vor dem Abspielen digitaler Tonquellen, um Beschädigung der Lautsprecher durch plötzliche

Tonspitzen zu vermeiden.

Allgemeines:

•

Vermeiden Sie Verwendung des externen Geräts, wenn dieses das sichere Fahren behindern kann.

•

Stellen Sie sicher, dass alle wichtigen Daten gesichert sind. Wir übernehmen keine Haftung für jeglichen Verlust

aufgenommener Daten.

•

Stellen Sie sicher, dass keine Metallgegenstände (wie etwa Münzen oder Werkzeuge) ins Innere des Geräts gelangen und

Kurzschlüsse verursachen.

•

Wenn ein Disc-Fehler durch Kondensationsbildung auf der Laserlinse auftritt, werfen Sie die Disc aus und warten Sie eine Zeit

lang, bis die Kondensation getrocknet ist.

•

Je nach dem Typ des Fahrzeugs wird die Antenne automatisch ausgeschoben, wenn Sie die Einheit mit angeschlossenem

Antennensteuerkabel (



17

) einschalten. Schalten Sie beim Parken in einem Bereich mit niedriger Decke die Einheit aus oder

stellen Sie die Quelle auf STANDBY.

Wie Sie diese Anleitung lesen

•

Die Bedienung wird im Wesentlichen anhand der Tasten auf der Frontblende erläutert.

•

Englischsprachige Anzeigen werden zur Erklärung verwendet. Sie können die Anzeigesprache im [

FUNCTION

]-Menü wählen.

(



5

)

•

[

XX

] zeigt die gewählten Punkte an.

•

( 

XX

) zeigt an, das Bezugsinformationen auf der angegebenen Seitennummer vorhanden sind.

VOR DER INBETRIEBNAHME 2

GRUNDLAGEN 3

ERSTE SCHRITTE 4

1 Wählen Sie die Anzeigesprache

und brechen Sie die

Demonstration ab

2 Stellen Sie die Uhrzeit und das

Datum ein

3 Festlegen der

Anfangseinstellungen

RADIO 5

AUX 7

CD / USB / iPod / ANDROID 7

AUDIOEINSTELLUNGEN 10

DISPLAY-EINSTELLUNGEN 11

FEHLERSUCHE 12

ZUR BEZUGNAHME 13

Wartung

Weitere Informationen

TECHNISCHE DATEN 14

EINBAU / ANSCHLUSS 15

JS_KWD_DPX_3000U_EN_GE.indd 2JS_KWD_DPX_3000U_EN_GE.indd 2 4/11/2015 1:44:36 PM4/11/2015 1:44:36 PM

Страница загружается ...

Kenwood DPX-3000U Руководство пользователя

Kenwood DPX-3000U Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов