Quick Start Guide
Краткое руководство пользователя
Жылдам бастау нұсқаулығы
SNE-LX1
Your Device at a Glance
Before you start, let's take a look at your new device.
l To power on your device, press and hold the power button
until the screen turns on.
l To power off your device, press and hold the power button,
and then touch .
l To restart your device, press and hold the power button,
and then touch .
l Press and hold the power button for 10 or more seconds to
forcibly restart your device.
1
2
3
4
5
6
7 8
9
10
11
12
13
14
NFC
Light sensor Secondary microphone
Rear camera Flash
Fingerprint scanner Headset jack
USB-C port Primary microphone
Speaker Power button
Volume button Front camera
Status indicator Earpiece
l Please keep the NFC area close to other devices or
objects while using the NFC function.
English (United Kingdom)
1
Getting Started
l Do not insert or remove the SIM card when your device
is powered on.
l Ensure that the card is correctly aligned and that the
card tray is level when you insert it into your device.
l Be careful not to scratch your device or hurt yourself
when using the eject pin.
l Store the eject pin out of the reach of children to
prevent accidental swallowing or injury.
l Do not use cut or modied SIM or microSD cards with
your device as these may not be recognised and could
damage the card tray (slot).
l If your SIM card does not match your device, please
contact your carrier.
Follow the instructions in the following gures to set up your
device. Please use the eject pin included.
Dual-SIM:
2
1
2
Dual Card Dual Standby Single
Pass (dual-SIM devices only)
Your device supports only dual card dual standby single pass,
which means you cannot use both SIM cards for calls or data
services simultaneously.
l When you are on a call using SIM card 1, SIM card 2 cannot
be used to make or answer calls. If someone calls SIM card
2, the caller will hear a voice message similar to "The
subscriber you dialled is out of the service area" or "The
subscriber you dialled cannot be connected for the
moment, please try again later." The actual message will
vary by service provider.
l When you are using SIM card 1's data service, SIM card 2's
data service will be disabled.
Your device's single pass feature helps reduce power
consumption and increase your device's standby time. It is not
related to your service provider's network conditions.
You can go to Settings > Wireless & networks > Dual SIM
settings, and enable Enable call forwarding between SIMs
to avoid the conicts mentioned above.
3
For More Information
If you encounter any problems whilst using your device, you
can get help from the following resources:
l Go to Tips for function details and usage tips.
l Visit http://consumer.huawei.com/en to view device
information, frequently asked questions and other
information.
l Visit http://consumer.huawei.com/en/support for the most
up-to-date contact information for your country or region.
Go to Settings and touch System > About phone > Legal to
view legal information for your product.
Go to Settings and touch System > About phone > Legal >
Safety information to view safety information for your
product.
Go to Settings and touch System > About phone >
Authentication info to view regulatory information for your
product.
Go to Settings and touch System > Certication logos to
view more information on certication logos for your product.
All pictures and illustrations in this guide, including but
not limited to the device colour, size, and display content,
are for your reference only. The actual device may vary.
Nothing in this guide constitutes a warranty of any kind,
express or implied.
4
Safety Information
Please read all of the safety information carefully before using
your device to ensure its safe and proper operation and to
learn how to dispose of your device properly.
Operation and Safety
l To prevent possible hearing damage, do not
listen at high volume levels for long periods.
l Using an unapproved or incompatible power adapter,
charger or battery may damage your device, shorten its
lifespan or cause a re, explosion or other hazards.
l Ideal operating temperatures are 0 °C to 35 °C. Ideal
storage temperatures are -20 °C to +45 °C.
l Pacemaker manufacturers recommend maintaining a
minimum distance of 15 cm between a pacemaker and a
wireless device to prevent potential interference with the
pacemaker. If using a pacemaker, hold the device on the
side opposite the pacemaker and do not carry the device in
your front pocket.
l Keep the device and the battery away from excessive heat
and direct sunlight. Do not place them on or in heating
devices, such as microwave ovens, stoves or radiators.
l Adhere to local laws and regulations while using the device.
To reduce the risk of accidents, do not use your device
while driving.
l While ying in an aircraft or immediately before boarding,
ensure that you use your device according to the
instructions provided. Using a wireless device in an aircraft
may disrupt wireless networks, present a hazard to aircraft
operations or be illegal under law.
l To prevent damage to your device's parts or internal
circuits, do not use it in dusty, smoky, damp or dirty
environments or near magnetic elds.
l When charging the device, make sure the power adapter is
plugged into a socket near the devices and is easily
accessible.
l Unplug the charger from the electric socket and from the
device when not in use.
l Do not use, store or transport the device where ammables
or explosives are stored (e.g. in a petrol station, oil depot or
5
chemical plant). Using your device in these environments
increases the risk of explosion or re.
l Dispose of this device, the battery and accessories
according to local regulations. They should not be disposed
of in normal household waste. Improper battery use may
lead to re, explosion or other hazards.
Disposal and recycling information
The crossed-out wheelie bin symbol on your product, battery,
literature or packaging reminds you that all electronic products
and batteries must be taken to separate waste collection
points at the end of their working lives; they must not be
disposed of in normal household waste. It is the responsibility
of the user to dispose of the equipment using a designated
collection point or service for separate recycling of waste
electrical and electronic equipment (WEEE) and batteries
according to local laws.
Proper collection and recycling of your equipment helps ensure
EEE waste is recycled in a manner that conserves valuable
materials and protects human health and the environment.
Improper handling, accidental breakage, damage, and/or
improper recycling at the end of its life may be harmful for
your health and the environment. For more information about
where and how to drop off your EEE waste, please contact
your local authorities, retailer or household waste disposal
service or visit the website http://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and any electrical accessories are compliant with
local applicable rules on the restriction of the use of certain
hazardous substances in electrical and electronic equipment,
such as EU REACH, RoHS and Batteries (where included)
regulations, etc. For declarations of conformity about REACH
and RoHS, please visit our web site http://
consumer.huawei.com/certication.
EU Regulatory Conformance
Body worn operation
The device complies with RF specications when used near
your ear or at a distance of 0.50 cm from your body. Ensure
that the device accessories, such as a device case and device
6
holster, are not composed of metal components. Keep the
device away from your body to meet the distance requirement.
The highest SAR value reported for this device type when
tested at the ear is
SNE-LX1 0.46 W/kg
And when properly worn on the body is
SNE-LX1 1.13 W/kg
Statement
Hereby, Huawei Technologies Co., Ltd. declares that this device
SNE-LX1 is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU.
The most recent and valid version of the DoC (Declaration of
Conformity) can be viewed at http://consumer.huawei.com/
certication.
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is
used.
This device may be restricted for use, depending on the local
network.
Restrictions in the 2.4 GHz band:
Norway: This subsection does not apply for the geographical
area within a radius of 20 km from the centre of Ny-Ålesund.
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the
packaging shows that this radio equipment will be subject to
some restrictions when placed on the market in Belgium (BE),
Bulgaria (BG), the Czech Republic (CZ), Denmark (DK),
Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES),
France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV),
Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT),
Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT),
Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden
(SE), the United Kingdom (UK), Turkey (TR), Norway (NO),
Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use
only when operating in the 5150 to 5350 MHz frequency
range.
Frequency Bands and Power
(a) Frequency bands in which the radio equipment operates:
Some bands may not be available in all countries or all areas.
Please contact the local network provider for more details.
(b) Maximum radio-frequency power transmitted in the
frequency bands in which the radio equipment operates: The
7
maximum power for all bands is less than the highest limit
value specied in the related Harmonised Standard.
The frequency bands and transmitting power (radiated and/or
conducted) nominal limits applicable to this radio equipment
are as follows:
SNE-LX1 GSM 900: 35 dBm, GSM 1800: 32 dBm,
WCDMA 900/2100: 25.7 dBm, LTE Band
1/3/7/8/20: 25.7 dBm, Wi-Fi 2.4G: 20 dBm,
Bluetooth: 10 dBm, Wi-Fi 5G: 5150-5350 MHz:
23 dBm, 5470-5725 MHz: 30 dBm, NFC: 42
dBuA/m at 10m
Accessories and Software Information
Some accessories are optional in certain countries or regions.
Optional accessories can be purchased from a licenced vendor
as required. The following accessories are recommended:
Adapters: HW-059200XHQ, HW-090200XH0 (X represents the
different plug types used, which can be either C, U, J, E, B, A, I,
R, Z or K, depending on your region)
Batteries: HB386589ECW
Earphones: MEND1532B528A02, HA1-3P, EPAB542-2WH05-
DH, 1293-3283-3.5MM-322
The product software version is SNE-LX1 8.2.0.110(C900).
Software updates will be released by the manufacturer to x
bugs or enhance functions after the product has been
released. All software versions released by the manufacturer
have been veried and are still compliant with the related
rules.
All RF parameters (for example, frequency range and output
power) are not accessible to the user, and cannot be changed
by the user.
For the most recent information about accessories and
software, please see the DoC (Declaration of Conformity) at
http://consumer.huawei.com/certication.
ErP Product Information
Huawei Technologies Co., Ltd. hereby declares that its
products conform to the Energy-related Products Directive
(ErP) 2009/125/EC. For detailed ErP information and the user
manuals required by Commission Regulation, please visit:
http://consumer.huawei.com/en/certication.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specications when used near
your ear or at a distance of 1.50 cm from your body. Ensure
8
that the device accessories, such as a device case and device
holster, are not composed of metal components. Keep the
device away from your body to meet the distance requirement.
Certication information (SAR)
This device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported to the FCC
for this device type complies with this limit.
The highest SAR value reported to the FCC for this device type
when using it at the ear is
SNE-LX1 0.94 W/kg
And when properly worn on the body is
SNE-LX1 0.41 W/kg
And when using the Wi-Fi hotspot function is
SNE-LX1 0.79 W/kg
FCC statement
This device has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
device does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to perform one or more of
the following operations to try to correct the interference:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the device into an outlet on a circuit different from
that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
9
Caution: Any changes or modications to this device not
expressly approved by Huawei Technologies Co., Ltd. for
compliance could void the user's authority to operate the
device.
10
Legal Notice
Trademarks and Permissions
, , and are trademarks or
registered trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
LTE is a trade mark of ETSI.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Huawei Technologies Co., Ltd. is under license.
Wi-Fi
®
, the Wi-Fi CERTIFIED logo and the Wi-Fi logo are
trademarks of Wi-Fi Alliance.
The N-Mark is a trademark or registered trademark
of NFC Forum, Inc. in the United States and in other countries.
Privacy Policy
To better understand how we protect your personal
information, please see the privacy policy at http://
consumer.huawei.com/privacy-policy.
Copyright © Huawei Technologies Co., Ltd.
2018. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND
DOES NOT CONSTITUTE ANY KIND OF WARRANTIES.
11
Знакомство с устройством
Перед началом работы ознакомьтесь с основными
функциями Вашего нового устройства.
l Чтобы включить устройство, нажмите и удерживайте
кнопку питания, пока не включится экран устройства.
l Чтобы выключить устройство, нажмите и
удерживайте кнопку питания, затем нажмите .
l Чтобы перезагрузить устройство, нажмите и
удерживайте кнопку питания, затем нажмите .
l Нажмите и удерживайте кнопку питания 10 секунд
или дольше, чтобы принудительно перезагрузить
устройство.
1
2
3
4
5
6
7 8
9
10
11
12
13
14
NFC
Датчик
освещенности
Дополнительный
микрофон
Основная камера Вспышка
Датчик отпечатка
пальца
Разъем для
наушников
Порт USB-C Основной микрофон
Динамик Кнопка питания
Кнопка регулировки
громкости
Фронтальная
камера
Индикатор
состояния
Разговорный
динамик
Русский
12
l При использовании функции NFC размещайте
область NFC-датчика устройства рядом с
другими устройствами или объектами.
13
Начало работы
l Не вставляйте и не извлекайте SIM-карту, когда
устройство включено.
l Убедитесь, что карта заняла правильное
положение в слоте и слот корректно размещен в
устройстве.
l Не поцарапайте себя или устройство, используя
инструмент для извлечения карт.
l Храните инструмент для извлечения карт в
недоступном для детей месте.
l Не устанавливайте обрезанные или измененные
вручную SIM-карты или карты microSD на Вашем
устройстве. Они не будут определены, могут
повредить слот для установки карт.
l Если Ваша SIM-карта не подходит к Вашему
устройству, обратитесь к оператору для ее
замены.
Подготовьте устройство к работе, следуя инструкциям
на нижеприведенных рисунках. Используйте
инструмент для извлечения карт, входящий в комплект
поставки.
Устройство с двумя SIM-картами:
2
или
1
14
Поддержка двух SIM-карт в
режиме ожидания (только для
устройств с двумя SIM-
картами)
Ваше устройство поддерживает работу двух SIM-карт в
режиме ожидания. Это значит, что Вы не сможете
одновременно использовать две SIM-карты для
вызовов или передачи данных.
l Совершая вызов с помощью SIM-карты 1, Вы не
сможете использовать SIM-карту 2 для выполнения
вызова или ответа на вызов. Если во время
разговора по SIM-карте 1 на SIM-карту 2 поступает
вызов, вызывающий абонент слышит голосовое
сообщение "Вызываемый абонент находится вне
зоны действия сети" или "Вызываемый абонент в
данный момент недоступен, позвоните позже." Текст
сообщения зависит от настроек оператора.
l Во время использования службы передачи данных
SIM-карты 1 служба передачи данных SIM-карты 2
выключена.
Функция поддержки двух SIM-карт в режиме ожидания
позволяет снизить энергопотребление устройства и
увеличить время его работы в режиме ожидания.
Работа этой функции не зависит от настроек сети
оператора.
Выберите Настройки > Беспроводные сети >
Настройки SIM-карт, затем включите Переадресация
между SIM-картами во избежание вышеописанных
ситуаций.
15
Дополнительная информация
Справочную информацию о работе устройства можно
найти в следующих источниках:
l Подробную информацию о функциях и полезные
советы см. в приложении Советы.
l Откройте http://consumer.huawei.com/en, чтобы
посмотреть данные устройства, вопросы и ответы и
другую полезную информацию.
l На веб-странице http://consumer.huawei.com/en/
support можно найти актуальную контактную
информацию в Вашей стране или регионе.
Откройте Настройки, нажмите Система > О телефоне
> Правовая информация, чтобы посмотреть правовую
информацию о Вашем устройстве.
Откройте Настройки, нажмите Система > О телефоне
> Правовая информация > Сведения о
безопасности, чтобы посмотреть меры
предосторожности, которые следует соблюдать при
работе с устройством.
Откройте Настройки, нажмите Система > О телефоне
> Аутентификационные данные, чтобы посмотреть
нормативную информацию о Вашем устройстве.
Откройте Настройки, нажмите Система > Логотипы
сертификатов, чтобы посмотреть дополнительную
информацию о логотипах сертификатов Вашего
устройства.
Все изображения в данном руководстве, включая
цвет и размер устройства, а также изображения на
экране, приведены для справки. Приобретенное
устройство может отличаться от изображенного в
данном руководстве. Положения настоящего
руководства не подразумевают никаких гарантий,
явных или неявных.
16
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/