Yamaha YSP-500 Руководство пользователя

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

©

Printed in Malaysia WM28780

YSP-500

Digital Sound Projector

TM

OWNER’S MANUAL

AB

PHILLIPS 763, 764, 765,

766, 767, 768

PIONEER 748, 785, 747

RADIO SHACK749

SCIENTIFIC ATLANTA

752, 753, 754

SONY 756, 757

TOCOM 755

UNIVERSAL 769, 772, 773,

774, 775

VIEWSTAR 764, 766, 776,

777, 778, 779, 782

SATELLITE TUNER

ECHOSTAR 822

GE 837, 838, 839

GENERAL INSTRUMENT

823

HITACHI 824

HUGHES 843, 844, 845, 846

JVC 822

MAGNAVOX 825

PANASONIC 826, 829

PHILLIPS 825, 843, 844,

845, 846, 847,

848, 849

PRIMESTAR 827

PROSCAN 837, 838, 839, 842

RADIO SHACK

828

RCA 837, 838, 839, 842

SAMSUNG 852

SONY 832, 835

TOSHIBA 833, 836

UNIDEN 825

ZENITH 834

00cv_YSP-500_AB.fm Page 1 Thursday, September 20, 2007 8:49 AM

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

i En

1

To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place with at least 5 cm (2 in) of space above (or below) this unit

– away from direct sunlight, heat sources, vibration, dust,

moisture, and/or cold.

3 Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold

to hot, and do not locate this unit in an environment with high

humidity (i.e. a room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto this

unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage

to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid

may cause electrical shock to the user and/or damage to this

unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc.

in order not to obstruct heat radiation. If the temperature inside

this unit rises, it may cause fire, damage to this unit, and/or

personal injury.

7 Do not plug in this unit to a wall outlet until all connections are

complete.

8 Do not operate this unit upside-down. It may overheat, possibly

causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power supply cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage

the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit

with a higher voltage than specified is dangerous and may cause

fire, damage to this unit, and/or personal injury. Yamaha will not

be held responsible for any damage resulting from use of this unit

with a voltage other than specified.

13 To prevent damage by lightning, keep the power supply cable

disconnected from a wall outlet or this unit during a lightning

storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed.

The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the power supply cable from the wall

outlet.

16 Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set this unit in

standby mode, and disconnect the power supply cable from the

wall outlet.

18 Condensation will form when the surrounding temperature

changes suddenly. Disconnect the power supply cable from the

outlet, then leave the unit alone.

19 When using the unit for a long time, the unit may become warm.

Turn the power off, then leave the unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug

can be reached easily.

21 The batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

Caution: Read this before operating this unit.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING

THE POWER SUPPLY CABLE OF THIS UNIT MUST BE

CONNECTED TO THE MAIN SOCKET OUTLET VIA A

PROTECTIVE EARTHING CONNECTION.

This unit is not disconnected from the AC power source as long as

it is connected to the AC wall outlet, even if this unit itself is

turned off by STANDBY/ON. This state is called the standby

mode. In this state, this unit is designed to consume a very small

quantity of power.

FOR U.K. CUSTOMERS

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the instructions

described below. Note that the plug severed from the mains lead

must be destroyed, as a plug with bared flexible cord is hazardous

if engaged in a live socket outlet.

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED. Make

sure that neither core is connected to the earth terminal of the three

pin plug.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type.

CAUTION

Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous radiation

exposure.

This symbol mark is according to the

EU directive 2002/96/EC.

This symbol mark means that electrical

and electronic equipment, at their end-

of-life, should be disposed of separately

from your household waste.

Please act according to your local rules

and do not dispose of your old products

with your normal household waste.

PREPARATIONINTRODUCTION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

SETUP

English

1 En

Overview.................................................................. 2

Features ................................................................... 3

Using this manual ................................................... 5

Supplied accessories ............................................... 6

Controls and functions ........................................... 7

Front panel ................................................................. 7

Front panel display .................................................... 8

Rear panel .................................................................. 9

Remote control......................................................... 10

Installation............................................................. 13

Before installing this unit......................................... 13

Installing this unit .................................................... 13

Connections........................................................... 16

Before connecting components................................ 17

Connecting a TV...................................................... 18

Connecting a DVD player/recorder ......................... 19

Connecting a digital satellite tuner

or a cable TV tuner.............................................. 20

Connecting a digital airwave tuner .......................... 21

Connecting a VCR................................................... 22

Connecting other external components ................... 23

Connecting a subwoofer .......................................... 24

Connecting the AC power supply cable .................. 25

Getting started ...................................................... 26

Installing batteries in the remote control ................. 26

Operation range of the remote control..................... 26

Turning on this unit or setting it to the standby mode

............................................................................. 27

Using SET MENU................................................. 28

Displaying the OSD (on-screen display) ................. 28

The flow chart of SET MENU................................. 29

Changing OSD language...................................... 30

AUTO SETUP (IntelliBeam) ............................... 31

The flow chart of AUTO SETUP ............................ 31

Installing the IntelliBeam microphone .................... 32

Using AUTO SETUP (IntelliBeam)........................ 33

Using the system memory .................................... 38

Convenient usage of the system memory ................ 38

Saving settings......................................................... 38

Loading settings....................................................... 39

Playback ................................................................ 41

Selecting the input source........................................ 41

Playing back sources................................................ 42

Adjusting the volume............................................... 43

Enjoying surround sound .................................... 44

5 Beam..................................................................... 44

Stereo plus 3 Beam .................................................. 45

3 Beam..................................................................... 45

My Surround............................................................ 45

Enjoying 2-channel sources in surround sound....... 47

Enjoying TV in surround sound .............................. 48

Adjusting surround mode parameters...................... 49

Enjoying stereo sound...........................................50

Playing back sound clearly (My Beam)...............51

Using auto-adjust function....................................... 51

Using manual-adjust function.................................. 52

Using the volume mode

(Night listening enhancer/TV volume equal

mode) ..................................................................53

Using the sleep timer.............................................54

MANUAL SETUP.................................................56

Using MANUAL SETUP........................................ 57

BEAM MENU ......................................................... 58

SOUND MENU....................................................... 62

INPUT MENU......................................................... 64

DISPLAY MENU.................................................... 66

Adjusting the audio balance.................................67

Using the test tone ................................................... 67

Using the audio output being played back............... 68

Selecting the input mode.......................................70

Adjusting the system parameters ........................71

Using the system parameters ................................... 71

Setting the MEMORY PROTECT .......................... 72

Setting the MAX VOLUME.................................... 73

Setting the TURN ON VOLUME ........................... 73

Setting the DEMO MODE ...................................... 74

Setting the PANEL INP. KEY ................................ 75

Disabling the front panel keys ................................. 76

Setting the FACTORY PRESET............................. 77

Remote control features........................................79

Setting remote control codes ................................... 79

Controlling other components ................................. 80

Using the TV macro ................................................ 83

Troubleshooting.....................................................85

Glossary..................................................................88

Index.......................................................................90

Specifications .........................................................91

List of remote control codes...........................................i

Contents

INTRODUCTION

PREPARATION

SETUP

BASIC OPERATION

ADVANCED OPERATION

ADDITIONAL INFORMATION

Overview

2 En

It is generally accepted that in order to fully enjoy the benefits of surround sound at home, you must endure the agony of

wiring and installing a great number of speakers in the hope that your listening room will give you the same kind of

surround sound experience as your local movie theater.

Yamaha YSP-500 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome

wiring go hand-in-hand with the enjoyment of multi-channel surround sound.

This slimline unit does away with the need for complicated wiring and installation worries, leaving you with a unit that is

not only easy to set up, but is also capable of reproducing the kind of powerful surround sound you have been waiting for

from its built-in 2 woofers and 16 full-range small speakers.

You can fine-tune the parameters of this unit to adjust the delay time for separate sound beams, resulting in highly

directional sound that comes in on the listening position from all directions.

The YSP-500 projects sound beams containing surround sound information for the front right (R), front left (L), surround

right (SR), and surround left (SL) speaker positions, which are reflected off the walls of your listening room before

reaching the actual listening position. With the addition of center (C) sound beams, this Digital Sound Projector creates

true-to-life 5.1-channel surround sound that makes you feel as if there are actual speakers around the room.

Sit back and enjoy the real sound experience of this simple, yet stylish Digital Sound Projector.

Overview

SL

SR

R

L

C

Listening position

Imaginary

surround left

speaker

Imaginary

surround right

speaker

Imaginary

front left

speaker

Imaginary

front right

speaker

Imaginary

center

speaker

Features

3 En

INTRODUCTION

English

Digital Sound Projector™

The Digital Sound Projector technology allows one slim

unit to control and steer multiple channels of sound to

generate multi-channel surround sound, thus eliminates

the need for satellite loudspeakers and cabling normally

associated with conventional surround sound systems.

This unit also employs the beam modes that let you enjoy

the surround sound (5 Beam, Stereo plus 3 Beam, 3 Beam,

and My Surround), stereo playback, and My Beam.

My Surround

In addition to the above mentioned beam modes, this unit

is equipped with My Surround beam mode that allows you

to enjoy surround system even in a small listening area.

My Surround is a function integrated and optimized with

DiMAGIC’s Euphony technology and Yamaha’s Beam

reproduction system.

My Beam

This unit employs My Beam that ensures a clear sound in

a noisy environment. You can adjust the beam angle

manually or automatically using the supplied remote

control to the maximum of 30°, rightward and leftward.

Versatile Remote Control

The supplied remote control comes with preset remote

control codes used to control the DVD player, VCR, cable

TV tuner, and digital satellite tuner connected to this unit.

In addition, the remote control is equipped with the macro

capability that enables a series of operations with the press

of a single button.

AUTO SETUP (IntelliBeam)

This unit employs the automatic sound beam and acoustic

optimization technology with the aid of the supplied

IntelliBeam microphone. You can avoid troublesome

listening-based speaker setup and achieve highly accurate

sound beam adjustments that best match your listening

environment.

Compatibility with the Newest Technologies

This unit employs decoders compatible with Dolby

Digital, DTS, Dolby Pro Logic, Dolby Pro Logic II, and

DTS Neo:6.

◆ Dolby Digital

This is the standard audio signal format used on various

digital media such as DVD, Blu-ray, and HD DVD. This

surround technology delivers high-quality digital audio for up

to 5.1 discrete channels to produce a directional and more

realistic effect.

◆ DTS

This is the standard audio signal format used on various

digital media such as DVD, Blu-ray, and HD DVD. This

surround technology delivers high-quality digital audio for up

to 5.1 discrete channels to produce a directional and more

realistic effect.

◆ Dolby Pro Logic

This sophisticated, matrix decoding technology up-converts

any 2-channel source audio to a 5.1-channel full bandwidth

playback, resulting in a surround sound experience.

◆ Dolby Pro Logic II

This is a redesigned version of Dolby Pro Logic that employs

2 stereo surround channels, a subwoofer, and a greatly

enhanced steering logic. This improved technology provides

an exceptionally stable sound field that simulates 5.1 to a

much greater degree than the original Dolby Pro Logic.

◆ DTS Neo:6

This technology decodes the conventional 2-channel sources

for 6-channel playback, enabling playback with the full-range

channels with higher separation. Music mode and Cinema

mode are available to play back music and movie sources

respectively.

Features

01EN_YSP-500_AB.book Page 3 Monday, January 14, 2008 9:50 AM

Black process 45.0° 240.0 LPI

Features

4 En

The “ ” logo and “IntelliBeam” are trademarks of

YAMAHA Corporation.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

“DTS” and “Neo:6” are registered trademarks of DTS, Inc.

Manufactured under license from 1 Ltd. Worldwide patents

applied for.

The “ ” logo and “Digital Sound Projector

™

” are trademarks

of 1 Ltd.

TruBass, SRS and the “ ” symbol are registered trademarks

of SRS Labs, Inc. TruBass technology is incorporated under

license from SRS Labs, Inc.

™

is a trademark of DiMAGIC Co., Ltd.

Using this manual

5 En

INTRODUCTION

English

• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the

supplied owner’s manual for each component.

• Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.

• y indicates a tip for your operation.

• This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In

case of differences between the manual and the product, the product has priority.

1 Install this unit in your listening room.

See “Installation” on page 13.

2 Connect this unit to your TV and other external components.

See “Connections” on page 16.

3 Prepare the remote control and turn on the power of this unit.

See “Getting started” on page 26.

4 Run AUTO SETUP.

See “AUTO SETUP (IntelliBeam)” on page 31.

5 Play back a source.

See “Playback” on page 41.

6 Change the beam modes.

See “Enjoying surround sound” on page 44.

7 Run MANUAL SETUP to fine-tune settings and/or set remote control codes.

See “MANUAL SETUP” on page 56 and “Remote control features” on page 79.

Using this manual

Notes

If you want to make additional settings

and adjustments

Supplied accessories

6 En

Check that you have received all of the following parts.

Supplied accessories

STEREO MY SUR.

MY BEAM

SLEEP

INPUTMODE

CH LEVEL MENU

RETURNTEST

TV VOL

VOLUME

MUTE

TV INPUT TV MUTE

ENTER

SUR. DECODE

CODE SET

5BEAM ST+3BEAM 3BEAM

VOL MODE

AUTO

SETUP

MACRO

TV

INPUT2INPUT1

YSP

TV/AV

CH

4

6

321

VCR DVD

TV

STB AUX

TV

POWERPOWERSTANDBY/ON

+10

0

78

9

5

AV

Remote control (×1)

Batteries (×2)

(AA, R6, UM-3)

OSD* video pin cable (×1)

IntelliBeam microphone

(×1)

Audio pin cable (×1)

Digital audio pin cable (×1)

Optical cable (×1)Cable clamp (×1)

Cardboard microphone

stand (×1)

(Orange)

(White/Red)

(Yellow)

Demonstration DVD

(×1)

QUICK REFERENCE

GUIDE

* The number of provided languages

varies depending on the model.

*OSD: On-Screen Display

01EN_YSP-500_AB.book Page 6 Monday, January 14, 2008 9:50 AM

Black process 45.0° 240.0 LPI

Controls and functions

7 En

INTRODUCTION

English

1 INTELLIBEAM MIC jack

Connect the supplied IntelliBeam microphone for AUTO

SETUP (see page 32).

2 Front panel display

Shows information about the operational status of this

unit.

3 Remote control sensor

Receives infrared signals from the remote control.

4 INPUT

Press repeatedly to switch between input sources (see

page 41).

Outputs a test tone to experience the sound beam (see

page 74).

5 VOLUME +/–

Controls the volume level of all audio channels (see

page 43).

6 STANDBY/ON

Turns on the power of this unit or sets it to the standby

mode (see page 27).

• When you turn on this unit, you will hear a click sound

followed by the 4 to 5-second interval before sound

reproducing.

• In the standby mode, this unit consumes a small amount of

power in order to receive infrared signals from the remote

control.

Controls and functions

Front panel

INTELLIBEAM MIC INPUT VOLUME STANDBY/ON

142653

Notes

Controls and functions

8 En

1 SRS TruBass indicator

Lights up when TruBass is turned on (see page 63).

2 EQUAL indicator

Lights up when the TV volume equal mode is selected

(see page 53).

3 NIGHT indicator

Lights up when one of the night listening enhancers is

selected (see page 53).

4 SLEEP indicator

Lights up when the sleep timer is set (see page 54).

5 Decoder indicators

Light up when the corresponding decoder operates

(see page 46).

6 PCM indicator

Lights up when this unit is reproducing PCM (Pulse Code

Modulation) digital audio signals.

7 MULTI indicator

Lights up when this unit detects a multi channel digital

audio signal.

8 Volume level indicator

Displays the current volume level.

9 Multi-information display

Shows information with alphanumeric characters when

you adjust the parameters of this unit.

y

You can adjust the brightness and display setting of the front

panel display using the F.DISPLAY SET parameter in MANUAL

SETUP (see page 66).

Front panel display

1 2 3 4

6 7

8

9

5

Controls and functions

9 En

INTRODUCTION

English

1 VCR AUDIO INPUT jacks

Connect your VCR via an analog connection (see

page 19).

2 TV/STB AUDIO INPUT jacks

Connect your TV, digital satellite tuner, or cable TV tuner

via an analog connection (see pages 18 and 20).

3 SUBWOOFER OUT jack

Connect your subwoofer (see page 24).

4 VIDEO OUT jack

Connect to the video input jack of your TV to display the

OSD of this unit (see page 18).

5 TV/STB OPTICAL DIGITAL INPUT jack

Connect your TV, digital satellite tuner, or cable TV tuner

via an optical digital connection (see pages 18 and 20).

6 AUX OPTICAL DIGITAL INPUT jack

Connect an external component via an optical digital

connection (see page 23).

7 DVD COAXIAL DIGITAL INPUT jack

Connect your DVD player via a coaxial digital connection

(see page 19).

8 SYSTEM CONNECTOR jack

Use to connect a Yamaha subwoofer equipped with a

SYSTEM CONNECTOR jack to this unit (see page 24).

9 AC power supply cable

Connect to the AC wall outlet (see page 25).

Rear panel

R

L

VCR TV/STB VIDEO TV/STB AUX

OPTICAL COAXIAL

DIGITAL INPUTOUTAUDIO INPUT

DVD SYSTEM

CONNECTOR

SUBWOOFER

12 34 5 6 7 8

9

R

L

VCR TV/STB VIDEO TV/STB AUX

OPTICAL COAXIAL

DIGITAL INPUTOUTAUDIO INPUT

DVD SYSTEM

CONNECTOR

SUBWOOFER

Controls and functions

10 En

This section describes the functions of the remote control

used to control this unit. Some buttons marked with an

asterisk (*) share the common functions between the YSP

and TV/AV operation modes (N).

y

You can also control other components using the remote control

once you set the appropriate remote control codes. See

“Controlling other components” on page 80 for details.

1 Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

2 STANDBY/ON

Turns on the power of this unit or sets it to the standby

mode (see page 27).

3 Transmission indicator

Lights up when infrared control signals are being output.

4 Input selector buttons

Use to select an input source (STB, VCR, DVD, AUX, or

TV).

5 VOL MODE

Turns on or off the volume modes (see page 53).

6 AUTO SETUP

Enters the AUTO SETUP menu (see page 31).

7 CH LEVEL

Adjusts the volume level of each channel (see page 68).

8 Cursor buttons / / / , ENTER

Select and adjust SET MENU items.

9 TEST

Outputs a test tone when adjusting the output level of each

channel (see page 67).

0 VOLUME +/–

Increases or decreases the volume level of this unit (see

page 43).

A MUTE

Mutes the sound. Press again to restore the audio output to

the previous volume level (see page 43).

B TV INPUT

Toggles between the input sources on the TV (see

page 80).

C DVD player/VCR control buttons

Control your DVD player or VCR (see pages 81 and 82).

D My Beam microphone

Collects the test tones from this unit when using the My

Beam auto-adjust function (see page 51).

E TV POWER

Turns on the power of your TV or sets it to the standby

mode (see page 80).

F AV POWER

Turns on the power of the selected component or sets it to

the standby mode (see pages 81 and 82).

G INPUT1/INPUT2

Switches the input source on your TV (see page 80).

Remote control

4

6

321

+10

0

78

9

5

STEREO

MY BEAM

SLEEP

INPUTMODE

CH LEVEL MENU

RETURNTEST

TV VOL

VOLUME

MUTE

TV INPUT TV MUTE

CODE SET

5BEAM ST+3BEAM 3BEAM

VOL MODE

AUTO

SETUP

MACRO

TV

INPUT2INPUT1

YSP

TV/AV

CH

STB

TV

VCR DVD AUX

TVAV

POWERPOWERSTANDBY/ON

ENTER

SUR. DECODE

MY SUR.

1D

E

F

G

I

H

J

K

L

M

N

O

P

Q

R

2

3

4

5

6

7

9

8

0

A

B

C

*

Controls and functions

11 En

INTRODUCTION

English

H MACRO

Use to set the TV macro (see page 83).

I SLEEP

Sets the sleep timer (see page 54).

J INPUTMODE

Toggles between input modes (AUTO, DTS, and

ANALOG) (see page 70).

K Beam mode buttons

Change the beam mode settings (see pages 44, 50, and

51).

L SUR. DECODE

Selects the surround mode for playback (see page 47).

M MENU

Displays the setup menu on your TV monitor (see

pages 33 and 57).

N Operation mode selector

Selects the operation mode of this unit. Select YSP when

operating this unit and select TV/AV when operating your

TV or other AV components.

O RETURN

Returns to the previous SET MENU screen.

P TV VOL +/–

Adjusts the volume level of your TV (see page 80).

Q CH +/–

Changes the channels of your TV, digital satellite tuner,

cable TV tuner, or VCR (see pages 80 and 82).

R TV MUTE, CODE SET

Mutes the audio output of your TV (see page 80).

Sets up remote control codes (see page 79).

Controls and functions

12 En

This section describes the functions of the remote control

used to control other components when the TV/AV mode

is selected with the operation mode selector (4).

1 Numeric buttons

Enter numbers.

2 Cursor buttons / / / , ENTER

Use to select DVD menu items.

3 MENU

Displays the DVD menu.

4 Operation mode selector

Selects the operation mode of this unit. Select YSP when

operating this unit and select TV/AV when operating your

TV or other AV components.

5 RETURN

Use to return to the previous DVD menu screen or exit

from the DVD menu.

4

6

321

+10

0

78

9

5

STEREO

MY BEAM

SLEEP

INPUTMODE

CH LEVEL MENU

RETURNTEST

TV VOL

VOLUME

MUTE

TV INPUT TV MUTE

CODE SET

5BEAM ST+3BEAM 3BEAM

VOL MODE

AUTO

SETUP

MACRO

TV

INPUT2INPUT1

YSP

TV/AV

CH

STB

TV

VCR DVD AUX

TVAV

POWERPOWERSTANDBY/ON

ENTER

SUR. DECODE

MY SUR.

1

2

3

5

4

Installation

13 En

PREPARATION

English

This section describes a suitable installation location to install this unit using a rack.

Depending on your installation environment, connections with external components can be done before installing this

unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which

procedure should come first.

This unit creates surround sound by reflecting projected

sound beams off the walls of your listening room. The

surround sound effects produced by this unit may not be

sufficient when this unit is installed in the following

locations.

• Rooms with walls inadequate for reflecting sound

beams

• Rooms with acoustically absorbent walls

• Rooms with measurements outside the following

range: W (3 to 7 m (10 to 23 ft)) x H (2 to 3.5 m (7 to

11.5 ft)) x D (3 to 7 m (10 to 23 ft))

• Rooms with less than 1.8 m (6 ft) from the listening

position to this unit

• Rooms where objects such as furniture are likely to

obstruct the path of sound beams

• Rooms where the listening position is close to the walls

• Rooms where the listening position is not in front of

this unit

y

• You can enjoy surround sound by selecting My Surround (see

page 45) as the beam mode even if your listening room may not

fulfill the above conditions (except when the listening position

is not directly facing toward the front of this unit).

• You can also enjoy surround sound by selecting stereo playback

(see page 50) or My Beam (see page 51) as the beam mode even

if your listening room may not fulfill the above conditions.

Make sure you leave an adequate amount of ventilation

space so that heat can escape. Make at least 5 cm (2 in) of

space above this unit.

• We do not recommend putting this unit directly on the floor of

your listening room. Please install this unit using a rack.

• This unit weights 8.5 kg (18 lbs 12 oz). Be sure to install this

unit where it will not fall subject to vibrations, such as from an

earthquake, and where it is out of the reach of children.

• When using a cathode-ray tube (CRT) TV, do not install this

unit directly above your TV.

• This unit is shielded against magnetic rays. However, if the

picture on your TV screen becomes blurred or distorted, we

recommend moving this unit away from your TV.

Install this unit where there are no obstacles such as

furniture obstructing the path of sound beams. Otherwise,

the desired surround sound effects may not be achieved.

You may install this unit in parallel with the wall or in the

corner.

Parallel installation

Install this unit in the exact center of the wall when it is

measured from the left and right corners.

Corner installation

Install this unit in the corner at a 40º to 50º angle from the

adjacent walls.

Installation

Before installing this unit

Notes

Installing this unit

An object, such as furniture

40° to 50°

An object, such as furniture

14 En

Installation

■ Installation examples

Example 1

Install this unit as close to the exact center of the wall as possible.

Example 2

Install this unit so that the sound beams can be reflected off the walls.

Example 3

Install this unit as close to the exact front of your normal listening position as possible.

15 En

Installation

PREPARATION

English

■ Using a rack

Install this unit under your TV in a commercially available

rack.

Make sure that the rack is large enough to allow adequate

ventilation space around this unit (see page 13) and that it is

strong enough to support the weight of both this unit and your TV.

Note

This unit

Connections

16 En

This unit is equipped with the following types of audio/video input/output jacks/terminal:

For audio input

• 2 optical digital input jacks

• 1 coaxial digital input jacks

• 2 sets of analog input jacks

For audio output

• 1 subwoofer output jack

For video output

• 1 analog output jack

Use these jacks/terminal to connect external components such as your TV, DVD player, VCR, digital satellite tuner, cable

TV tuner, digital air wave tuner, and game console. Further, by connecting a subwoofer to this unit, you can enjoy

reinforced low-bass sounds. For details on how to connect various types of external components to this unit, see pages 18

to 24.

• Do not connect this unit or other components to the mains power until all connections between components are

complete.

• Unplug the AC power supply cable before changing connections, moving or cleaning this unit.

Connections

CAUTION

TV

This unit

Audio connection

Video connection

VCR or game consoleDVD player Subwoofer Digital satellite tuner

or cable TV tuner

17 En

Connections

PREPARATION

English

■ Cables used for connections

Audio pin cable (supplied)

Optical cable (supplied)

Digital audio pin cable (supplied)

Subwoofer pin cable

System connector cable

OSD video pin cable (supplied)

■ Notes on connecting the optical cable

• Pull out the cap before connecting the optical cable.

When you are not using the optical cable, be sure to put

the cap back in place.

• When inserting the cable into the optical digital jack,

make sure the direction is correct.

■ Affixing cables

To prevent cables from becoming unplugged, place the

supplied cable clamp with the open side facing upward,

attach it to the rear panel of this unit in a suitable position,

and then affix cables in the cable clamp.

Before connecting components

Audio

Video

(White)

(Red)

(White)

(Red)

(Orange)(Orange)

5

(Yellow)(Yellow)

Cap

Optical cable

Attach to this unit

18 En

Connections

For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this

unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB

OPTICAL DIGITAL INPUT jack on this unit.

For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD

for easy viewing when you adjust the system parameters in SET MENU.

y

To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 17).

If you make analog and optical digital audio connections at the same time as shown in the illustration below, the digital audio signals

input at the TV/STB OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the TV/STB AUDIO INPUT

jacks.

OSD video pin cable Audio pin cable

Optical cable

Connecting a TV

Note

R

L

VCR TV/STB VIDEO TV/STB AUX

OPTICAL COAXIAL

DIGITAL INPUTOUTAUDIO INPUT

DVD SYSTEM

CONNECTOR

SUBWOOFER

Rear panel of this unit

TV

Optical

digital

output

RL

Video

input

Analog

audio

output

Video Audio

Страница загружается ...

Yamaha YSP-500 Руководство пользователя

Yamaha YSP-500 Руководство пользователя

на других языках

Похожие модели бренда