Sony PSP-3008 Black Base Руководство пользователя

Бренд: Sony

Модель: PSP-3008 Black Base

Тип: Руководство пользователя

Safety and Support

Безопасность и поддержка

PSP-3008

4-115-361-71(1)

WARNING

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

CAUTION – Use of controls or adjustments or

performance of procedures other than those

specified herein may result in hazardous

radiation exposure.

This appliance is classified as a CLASS 1 LASER product under

IEC60825-1 + A2: 2001.

• This product is intended for ages 6 and up.

• Avoid prolonged use of the PSP™ system. To help prevent eye

strain, take a break of about 15 minutes during every hour of play.

• If you experience any of the following health problems, discontinue

use of the system immediately. If symptoms persist, consult with

your doctor.

– Dizziness, nausea, fatigue or symptoms similar to motion sickness

– Discomfort or pain in a part of the body, such as eyes, ears, hands

or arms

Regulatory information

• The nameplate is located in the battery compartment of the unit.

• This equipment complies with EN55022 Class B and EN55024 for

use in following areas: residential, commercial and light-industrial.

The manufacturer of this product is Sony Computer Entertainment Inc.,

2-6-21 Minami-Aoyama, Minato-ku Tokyo, 107-0062 Japan.

Distributed in Europe by Sony Computer Entertainment Europe Ltd,

10 Great Marlborough Street, London, W1F 7LP.

Always play in a well lit environment. Take regular breaks, 15 minutes

every hour. Avoid playing when tired or suffering from lack of sleep.

Some individuals are sensitive to flashing or flickering lights or

geometric shapes and patterns, may have an undetected epileptic

condition and may experience epileptic seizures when watching

television or playing videogames. Consult your doctor before playing

videogames if you have an epileptic condition and immediately should

you experience any of the following symptoms whilst playing:

dizziness, altered vision, muscle twitching, other involuntary

movement, loss of awareness, confusion and/or convulsions.

Avoid prolonged use of the PSP™ system. Take a 15 minute break

every hour. Stop using the PSP™ system immediately if you

experience an unpleasant sensation or pain in your hands, wrists or

arms. If the condition persists, consult a doctor.

WARNING

CLASS 1 LASER PRODUCT

LASER KLASSE 1 PRODUKT

Photosensitivity

Repetitive Motion Injuries

WARNING

Adjust your headphone volume so that surrounding sounds can be

heard. If you experience ringing or any discomfort in your ears,

discontinue use of your Headphones.

Radio waves may affect electronic equipment or medical devices (for

example, pacemakers), which may cause malfunctions and possible

injuries.

• If you use a pacemaker or other medical device, consult your doctor

or the manufacturer of your medical device before using the wireless

networking feature.

• Keep the PSP™ system at least 20 cm away from a pacemaker or

other medical devices when using the wireless networking feature.

• Do not carry the PSP™ system in a breast pocket if you use a

pacemaker.

• Turn off your PSP™ system immediately, if you have any reason to

suspect that interference is occurring with your pacemaker.

• Do not use the wireless networking feature in the following

locations:

– Areas where its use is prohibited, such as in aeroplanes or

hospitals. Abide by medical institution regulations when using the

PSP™ system on their premises. Additionally, you may be

violating air safety regulations punishable by fines by using the

wireless networking feature in an aeroplane or by using the PSP™

system during takeoff or landing.

– Crowded areas.

– Areas near fire alarms, automatic doors and other types of

automated equipment.

• Use caution when using the wireless networking feature in a vehicle,

as radio waves may affect electronic equipment in some vehicles.

Sony Computer Entertainment Inc. uses DNAS (Dynamic Network

Authentication System), a proprietary authentication system, to help

protect copyright and security in connecting the PSP™ system to a

network. DNAS may retrieve information about a user's hardware and

software for authentication, copy protection, account blocking, system,

rules, or game management and other purposes. The information

collected does not identify the user personally. The unauthorised

transfer, exhibition, export, import or transmission of programs and

devices circumventing its authentication scheme may be prohibited by

law.

The System Software included within this product is subject to a

limited licence from Sony Computer Entertainment Inc. Refer to

http://www.scei.co.jp/psp-eula/ for further details.

Headphones

Radio waves

About DNAS

System Software

Table of contents

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About the PSP™ system documentation . . . . . . . . . 4

x Before use

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Compatible media . . . . . . . . . . . . . . . . . . . . . . . . . . 12

x Troubleshooting

Before requesting service . . . . . . . . . . . . . . . . . . . . 14

GUARANTEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

x Additional information

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Information about system functionality published in this document

may vary from the information for your PSP™ system, depending on

the system software version in use.

The PSP™ (PlayStation®Portable) system documentation includes the

following:

Safety and Support (this document)

This document contains safety information related to the use of the

PSP™ system, troubleshooting, specifications and other information.

Quick Reference

This document contains information on basic hardware operations of

the PSP™ system.

User's Guide

(access from : eu.playstation.com/manuals)

This online document is accessed through the Internet and contains

detailed information related to use of the PSP™ system software.

Table of contents About the PSP™ system

documentation

Precautions

Before use

Carefully read the supplied instructions before use. Retain them for

future reference.

This product has been designed with the highest concern for safety.

However, any electrical device, if used improperly, has the potential for

causing fire, electrical shock or personal injury. To help ensure

accident-free operation, follow these guidelines:

• Observe all warnings, precautions and instructions.

• Regularly inspect the AC Adaptor for damage and for dust build-up

around the power plug or electrical outlet.

• Stop use, unplug the AC Adaptor from the electrical outlet and

disconnect any other cables immediately if the device functions in an

abnormal manner, produces unusual sounds or smells or becomes

too hot to touch.

• Use in a well-lit area and keep the screen a safe distance from your

face.

• Avoid prolonged use of the PSP™ system. To help prevent

eyestrain, take a break of about 15 minutes during every hour of play.

• Exercise care when setting the volume. If you set the volume too

high, it may harm your hearing or damage the speakers.

• Keep the system and accessories out of the reach of small children,

as small children may swallow small parts such as Memory Stick

Duo™.

• Do not use the system while driving or riding a bicycle. Looking at

the screen or operating the system while driving an automobile or

riding a bicycle may result in a traffic accident.

• Do not use the system or accessories near water.

• Use only attachments/accessories specified by the manufacturer.

• Do not expose the system or accessories to high temperatures, high

humidity, or direct sunlight.

• Do not leave the system or accessories in a car with the windows

closed (particularly in summer).

• Do not expose the system or accessories to dust, smoke or steam.

• Do not allow liquid or small particles to get into the system or

accessories.

• Do not place the system or accessories on surfaces that are tilted,

unstable or subject to vibration.

• Do not throw, drop or step on the system or accessories, and do not

subject the devices to strong physical shock. Sitting down with the

PSP™ system in a pocket or placing the system in the bottom of a

backpack along with heavy objects may cause damage to the system.

• Do not forcibly twist the PSP™ system or expose the system to

strong physical shock during gameplay, as doing so can damage the

system or cause the disc cover to open, ejecting the disc. Handle the

analog stick with care.

• Do not put heavy objects on the system or accessories.

Before use

Precautions

Accessory compatibility

Some accessories designed for use with the PSP-1000 series

and/or the PSP-2000 series are not compatible with the

PSP-3000 series. Visit eu.playstation.com/psp for details.

Safety

Use and handling

Precautions

• Do not touch or insert foreign objects into the connectors of the

system or accessories.

• Do not touch the system or AC Adaptor for an extended period of

time while in use. Depending on the conditions of use, the system or

the AC Adaptor may reach temperatures of 40° C or more. Extended

contact under these conditions may cause low-temperature burns*.

* Low-temperature burns are burns that occur when the skin is in contact

with objects of the AC relatively low temperatures (40° C or more) for

an extended period of time.

• When connecting the system to a plasma or projection* TV, do not

leave a still image on the TV screen for an extended period of time,

as this may leave a faint image permanently on the screen.

* Except LCD screen types

• Do not touch the plug of the AC Adaptor with wet hands.

• Do not touch the AC Adaptor or the system, if connected to an

electrical outlet, during an electrical storm.

• Do not use a power source other than the supplied (or approved

replacement) Battery Pack and AC Adaptor.

• Do not allow dust or foreign matter to build up around the system or

accessory connectors. If there is dust or foreign matter on the

system's connectors or the AC Adaptor, wipe it off with a dry cloth

before connecting. Dust or other matter on the connectors can result

in fire or electrical shock.

• Unplug the AC Adaptor from the electrical outlet, disconnect any

other cables and remove the Battery Pack from the system before

cleaning or when you do not intend to use the system for an extended

period of time.

• Protect the AC Adaptor from being walked on or compressed

particularly at plugs and the point where they exit from the system.

• When disconnecting the AC Adaptor, hold it by the plug and pull

straight out from the electrical socket. Never pull by the cord and do

not pull at an angle.

• Do not use the system to play games, video or music when the

system is covered with any type of fabric. If you want to pause or

temporarily store the system while playing games, video or music,

put the system in Sleep Mode before placing it in case or covering.

• Do not connect the AC Adaptor to a voltage transformer or inverter.

Connecting the AC Adaptor to a voltage transformer for overseas

travel or an inverter for use in an automobile may cause heat to build

up in the AC Adaptor and may cause burns or a malfunction.

• The socket-outlet shall be installed near the equipment and shall be

easily accessible.

• The LCD screen is made of glass and may crack if subjected to

excessive force.

• Black (dark) pixels and continuously lit pixels may appear in certain

locations on the LCD screen. The appearance of such spots is a

normal occurrence associated with LCD screens and is not a sign of

a system malfunction. LCD screens are made using highly precise

technology. However, a very small number of dark pixels or

continuously lit pixels exist on each screen. Also, a distorted image

may remain on the screen for several seconds after the system has

been turned off.

• Direct exposure to sunlight may damage the system's LCD screen.

• When using the system in a cold environment, you may notice

shadows on the graphics or the screen may appear darker than usual.

This is not a malfunction, and the screen will return to normal when

the temperature rises.

• Do not leave still images displayed on the screen for an extended

period of time. This may cause a faint image to be left permanently

on the screen.

AC Adaptor use

LCD screen

Precautions

Before use

Do not touch the "pickup" located inside the disc cover of the system.

Touching the pickup may damage the system.

For best results, follow these guidelines:

• Do not touch the connector area (A) with your hands or with metal

objects.

• Do not press hard when writing on the memo area (B).

• Do not use or store a Memory Stick Duo™ in the following:

– Places subject to high temperatures, such as in a hot vehicle

– Locations exposed to direct sunlight

– Locations that are very humid or conducive to corrosion

• When using Memory Stick Duo™ media without an erasure

prevention switch, take care not to overwrite or delete data by

accident. If your Memory Stick Duo™ media has an erasure

prevention switch, you can prevent data from being saved, edited, or

deleted by setting the switch in the LOCK position.

Recorded data

Do not use the Memory Stick Duo™ in the following ways, as doing

so may result in data loss or corruption:

• Removing the Memory Stick Duo™ or turning off the system while

it is loading or saving data or being formatted.

• Using it in a location that is exposed to static electricity or electrical

interference.

About the "pickup"

Memory Stick Duo™

Pickup

If, for any reason, software or data loss or corruption occurs,

it is usually not possible to recover the software or data. Sony

Computer Entertainment Inc. and its subsidiaries and

affiliates accept no liability for damages, costs or expenses

arising from software, data loss or corruption.

Precautions

• When placing the PSP™ system in a commercially available case,

turn off the power or put the system in sleep mode. Do not use the

system while it is in the case. Leaving the system on, or using it while

in a case or covering may cause overheating or may damage the

system.

• Put both the PSP™ system and the Remote Control in Hold Mode to

help prevent unintended operation.

Use the PSP™ system and accessories according to the instructions in

this manual. No authorisation for the analysis or modification of the

system, or the analysis and use of its circuit configurations, is provided.

Disassembling will void the system warranty and may be harmful. The

LCD screen, in particular, contains dangerous, high-voltage parts, and

the laser beam for reading UMD

may cause visual impairment if

exposed directly to the eyes.

When using the PSP™ system's "Scan" function to select a wireless

LAN access point, access points that are not intended for public use

may be displayed. Only connect to a personal access point that you are

authorised to use, or one that is available through a public wireless

LAN or hotspot service.

When travelling note any applicable wireless regulations.

If the PSP™ system or UMD® is brought directly from a cold location

to a warm one, moisture may condense on the lens inside the system or

on the UMD®. Should this occur, the system may not operate properly.

In this case, remove the UMD® and turn off and unplug the system. Do

not put the UMD® back in until the moisture evaporates (this may take

several hours). If the system still does not operate properly, contact the

appropriate PSP™ customer service helpline which can be found

within every PSP™ format software manual.

• Do not touch the opening on the rear of the disc (recorded surface of

the disc) with your fingers.

• Do not allow dust, sand, foreign objects or other types of dirt to get

on the disc.

• If the UMD® becomes dirty, gently wipe the exterior and recorded

surfaces of the UMD® using a soft cloth. Do not use solvents or other

chemicals.

• Do not use a UMD® that is cracked or warped or has been repaired.

The UMD® may break inside the PSP™ system, leading to injury or

malfunction.

Cases and coverings

Never disassemble the system or

accessories

Using the access point

Overseas use

Moisture condensation

UMD® handling

Precautions

Before use

Follow the guidelines listed below to help avoid deterioration or

discolouration of the PSP™ system:

• Do not use solvents or other chemicals to clean the exterior surface.

• Do not allow the system to remain in direct contact with rubber or

vinyl products for an extended period of time.

• Do not use a chemically-treated cleaning cloth to wipe off the

system.

• Do not attempt to remove the analog stick from the system front, as

doing so will damage the system and may result in injury.

• For best results, go to (Settings) (System Settings),

and then with the "System Information" screen displayed, rotate the

analog stick in a circular motion. This will adjust the analog stick's

range of movement.

For safety reasons, unplug the AC Adaptor from the electrical outlet,

disconnect any other cables and remove the Battery Pack from the

system before cleaning.

Cleaning the exterior surface and LCD screen

Wipe gently with a soft cloth.

Cleaning the connectors

If the headphones or remote control connectors become dirty, this

could cause noise or interruptions in sound. Wipe the connectors with

a dry, soft cloth to keep in clean condition.

Handling and care of exterior surfaces

Before using the analog stick

Cleaning

About the battery

Battery Pack precautions

Do not handle a damaged or leaking Battery Pack.

Contact with the material can result in injury or burns to the eyes or

skin. Even if foreign substances are not immediately visible, chemical

changes in the material can result in injuries occurring at a later time.

Handle the Battery Pack with care.

The Battery Pack may explode or present a fire or chemical burn hazard

if it is not handled carefully.

• Do not allow the Battery Pack to come into contact with fire or

subject it to extreme temperatures such as in direct sunlight, in a

vehicle exposed to the sun or near a heat source.

• Do not cause the Battery Pack to short-circuit.

• Do not disassemble or tamper with the Battery Pack.

• Prevent damage to the Battery Pack. Do not carry or store the Battery

Pack with metal items such as coins or keys. If damaged, discontinue

use.

• Do not throw or drop the Battery Pack or subject it to strong physical

shock.

• Do not put heavy objects on or apply pressure to the Battery Pack.

• Do not allow the Battery Pack to come into contact with liquids. If it

becomes wet, discontinue use until it is completely dry.

• Keep the Battery Pack out of the reach of small children.

• If the PSP™ system will not be used for an extended period of time,

remove the Battery Pack and store it in a cool, dry place out of the

reach of children.

• Use only the supplied Battery Pack or a replacement marked for use

with correct model of the PSP™ system.

You can charge the battery using the AC Adaptor or a USB cable (sold

separately). For details about how to charge the battery, refer to the

supplied Quick Reference manual.

Estimating the battery charge time

Figures shown are for when charging a battery with no charge remaining.

Hints

• Do not use the PSP™ system with the AC Adaptor when the Battery Pack

is not inserted in the system. If the AC Adaptor is disconnected suddenly,

it may result in damage to the system.

• Charge in a temperature of 10°C to 30°C. Charging may not be as effective

in other environments.

• Charging may take longer when the system is turned on during charging or

when a USB cable is used for charging.

About the battery

Warning

If you come into contact with material from a leaking Battery

Pack, take the following actions:

• If the material gets into the eyes, do not rub. Immediately rinse

the eyes with clean water and seek medical attention.

• If the material comes into contact with the skin or clothes,

immediately rinse the affected area with clean water. Consult

your doctor if inflammation or soreness develops.

Charging

Charging with the AC Adaptor Approximately 2 hours 20 minutes

Charging using a USB cable Approximately 5 hours

About the battery

Before use

• USB charging uses the power supply of the USB port of the connected

device. Charge the battery by connecting the PSP™ system to a device

equipped with a high-power USB port. If a low-power USB port or a USB

hub is used, the battery may not be able to be charged.

• When the AC Adaptor and a USB cable are connected to the PSP™ system,

the battery is charged by the power supply of the AC Adaptor.

• Do not use or charge the PSP™ system with the battery cover removed. If

the battery is suddenly removed, the battery may be dropped and damaged,

which may cause a system malfunction.

*1 Based on tests conducted using the supplied Battery Pack, with the system

in single player mode, with Headphones with Remote Control in use, and

with wireless LAN not in use.

*2 Based on tests conducted using variables of system speakers versus

Headphones, volume level and screen brightness level.

Hint

Battery duration may vary depending on the type of content being played or

usage conditions such as screen brightness and environmental factors. As the

battery pack ages, it will have a shorter duration.

• The Battery Pack has a limited life span. Battery duration will

decrease with repeated usage and age. When battery duration

becomes short or if the Battery Pack bulges, replace the battery

immediately.

• The Battery Pack life span varies depending on how it is stored, the

conditions of use and environmental factors, such as temperature.

• For safety reasons, turn off the system and remove the power cord

from the electrical outlet and disconnect any other cables before

replacing the Battery Pack.

• If the system is left unused after the battery charge runs out or the

battery pack has been removed, the date and time settings may be

reset. If this occurs, the date and time setting screen will be displayed

the next time the PSP™ system is turned on.

When the system will not be used for an extended period of time,

remove the Battery Pack from the system. Store the Battery Pack in a

cool, dry place out of the reach of children.

Estimated battery duration

Game Approximately 3 - 6 hours

Video playback Approximately 3 - 5 hours

Battery Pack life

Replacing the Battery Pack

Storing the Battery Pack

Compatible media

The media types listed below can be used on the PSP™ system.

Throughout this manual, the term "Memory Stick Duo™" is used to

refer to all types of Memory Stick™ media in the table below.

*1 Compatible with MagicGate™

*2 Compatible with high-speed data transfer over a parallel interface.

*3 To use Memory Stick Micro™ media, you must first insert it into an M2

Duo-size adaptor. If the Memory Stick Micro™ is inserted directly into

the system, it may not be able to be ejected.

Hints

• The standard-size Memory Stick™ cannot be used with the system.

• Performance of all Memory Stick™ media is not guaranteed.

• If a Memory Stick Duo™ is formatted in a device other than the PSP™

system, such as a PC, it is possible that the system will not recognise it. If

this happens, go to (System Settings) "Format Memory Stick™"

and re-format the Memory Stick Duo™.

UMD® contain a region code that is assigned to each sales region. This

system can play UMD® marked with either region code "ALL" or "5".

Parallel data transfer (high-speed data transfer)

Parallel data transfer is a high-speed data transfer technology that

allows multiple data input/output connectors on the Memory Stick™ to

be used at the same time (parallel interface). The PSP™ system

supports 4-bit parallel data transfer. However, the time required for

reading/writing differs according to the media in use.

Compatible media

Type Logo

UMD®

Memory Stick Duo™ (not

MagicGate™-compatible)

MagicGate™ Memory Stick

Duo™

Memory Stick Duo™

(MagicGate™ compatible)

*1 *2

Memory Stick PRO Duo™

*1 *2

Memory Stick PRO-HG

Duo™

*1 *2

Memory Stick Micro™

(M2™)

*1 *2 *3

UMD®

Memory Stick™

Compatible media

Before use

File size limitation

The specification of the file system used on Memory Stick™ media

limits the size of files that can be recorded or played to less than 4 GB

per file.

MagicGate™

is a term of copyright-protection technology

developed by Sony Corporation.

Before requesting service

Go through this section if you experience difficulty in operating the

PSP™ system. Should any problem persist, contact the appropriate

PSP™ customer service helpline which can be found within every

PSP™ format software manual.

The power does not turn on.

, The battery charge may have run out. Charge the battery.

, Check that the Battery Pack is properly inserted.

The battery does not charge, or does not fully recharge.

, When using the AC Adaptor, check that the AC Adaptor is

properly inserted in the system and the electrical outlet.

, When using the USB cable, check that the USB cable is fully

inserted into the system and the USB device and that the USB

device is turned on.

, The battery may not charge efficiently or charging may take

longer depending on the usage conditions or environmental factors

during charging. For details, see "About the battery"

( page 10).

, Check that the system connectors (such as the USB connector) and

the AC Adaptor or USB cable connectors are clean. If not, wipe

the connectors with a soft, dry cloth.

, When using an AC Adaptor, check that the correct AC Adaptor for

this product is being used.

, Some USB devices cannot be used to charge the battery.

For details, see "About the battery" ( page 10).

, When you connect a USB cable during gameplay, the PSP™

system does not automatically change to USB mode.

, If "USB Auto Connect" under (System Settings) is set to

"Off", the system must be set to USB mode manually. Select

(USB Connection) under (Settings).

The battery charge doesn't last long.

, The charge may run out sooner depending on the storage method,

usage conditions or environment factors. For details, see "About

the battery" ( page 10).

The Battery Pack is bulged or swollen.

, If the Battery Pack bulges, replace the Battery Pack immediately.

The screen suddenly turns dark.

, If "Backlight Auto-Off" under (Power Save Settings) has been

set, the LCD screen's backlight will automatically turn off if the

system is left inactive for the set amount of time.

, If "Auto Sleep" under (Power Save Settings) has been set, the

system will automatically enter sleep mode if left inactive for the

set amount of time.

The screen is dark and hard to see.

, Use the display button on the system front to adjust the brightness.

Troubleshooting

Before requesting service

Power, battery and charging issues

Screen

Before requesting service

Troubleshooting

Black or continuously lit pixels on the screen do not

disappear.

, LCD screens are made with highly precise technology, but in some

cases, black (dark) pixels or continuously lit pixels may appear on

the screen. This is not a system malfunction. For details, see

"Precautions" ( page 5).

The colour of the screen does not look right.

, If "Theme" under (Theme Settings) is set to "Original", the

background colour will automatically change at the beginning of

each month.

Video cannot be output to the TV.

, Check that the video output cable is fully inserted into the system

and the TV.

, Some TVs may not be able to output video from the PSP™

system.

, The PSP™ system outputs in the NTSC video format. If a display

is used which does not support the NTSC video format, no picture

will be displayed. Check with the TV manufacturer for details.

When video is output to a TV, black bars are displayed on

the sides (or top and bottom) of the image.

, Because the size of the video image output to the TV for games or

Internet browser screens is predetermined, horizontal or vertical

black bars may be displayed at the edges of the image.

When the PSP™ system is connected to a TV, the screen

suddenly goes dark.

, If "Screensaver" under (Connected Display Settings) has

been set, the screensaver is automatically activated if no

operations are performed for a certain period of time.

There is no sound.

, Check that the volume is not set to zero. Try raising the volume.

, Check that the mute setting is not on. Press the sound button on the

system front to clear the mute setting.

, When headphones or a video output cable is connected, no sound

is output from the PSP™ system speakers.

The volume does not turn up.

, If "AVLS" under (Sound Settings) is set to "On", the

maximum volume level is restricted.

, When a video output cable is connected, the volume cannot be

changed using the PSP™ system's volume + button / volume -

button. Adjust the volume on the connected device.

The headphones do not emit sound or the sound contains

noise.

, Check that the headphones are fully inserted.

The PSP™ system's internal microphone does not pick up

sound.

, When a headset (sold separately) is connected, the PSP™ system

receives sound through the headset's microphone. The internal

microphone cannot be used.

Sound

Before requesting service

The system does not recognise the UMD®.

, Slide the POWER/HOLD switch up and hold it for at least three

seconds until the POWER indicator turns off. Power will be

completely cut off. After that, turn the system back on.

Upon starting a UMD®, a message recommending an update

is displayed.

, Update the system software. For details on updates, refer to the

Quick Reference manual supplied with the system.

The Memory Stick Duo™ cannot be inserted.

, Set the Memory Stick Duo™ in the proper direction when

inserting.

, Check that media of a type that can be used with the PSP™ system

is inserted. For details, see "Compatible media" ( page 12).

The system does not recognise the Memory Stick Duo™.

, If Memory Stick Duo™ media is formatted using a PC, it may not

be recognised by the PSP™ system. If this happens, copy any data

you want to keep on the PC, and then go to (System Settings)

"Format Memory Stick™" and re-format.

, Check that the Memory Stick Duo™ is properly inserted. Try

taking out the Memory Stick Duo™ and reinserting it.

The system can't save or load data.

, There may be a problem with the Memory Stick Duo™. Try using

another Memory Stick Duo™, if available.

Videos do not play.

, Some types of data may not be able to be played.

The system does not recognise a video file.

, Video data of types that are not compatible with the system will

not be recognised.

, If the file or folder name on the Memory Stick Duo™ is changed,

or if the file or folder is moved to another location using a PC, the

system may not recognise it.

Music does not play.

, The playback methods may be limited for some music data that is

distributed through the Internet. In such cases, the data may not be

able to be played on the PSP™ system.

The system does not recognise a music file.

, Check that the music data is saved in the correct folder on the

Memory Stick Duo™. For details, refer to the User's Guide

( page 4).

, Music data of types that are not compatible with the system will

not be recognised.

, To play WMA format data, you must first activate "Enable WMA

Playback" under (System Settings).

UMD®

Memory Stick Duo™

Video

Music

Before requesting service

Troubleshooting

Images do not display.

, Depending on the image data size, certain images are not

viewable.

, If images are edited using a PC, they may not be viewable.

The system does not recognise an image file.

, Check that the data is saved in the correct folder on the Memory

Stick Duo™. For details, refer to the User's Guide ( page 4).

, If the file or folder name on the Memory Stick Duo™ is changed,

or if the file or folder is moved to another location using a PC, the

system may not recognise it.

, Images that are not compatible with the PSP™ system will not be

recognised.

A connection to the network cannot be established.

, Check that the WLAN switch on top of the system is turned on.

, If "WLAN Power Save" under (Power Save Settings) is set to

"On", you may not be able to transmit data correctly.

, There may be too much distance between the system and the

access point or, when in ad hoc mode, between the system and the

other player's system.

, Check that the network settings are correct. Refer to the

instructions supplied with the network equipment and by your

Internet service provider to make the correct network settings.

, Depending on the access point setting, you may need to enter the

system's MAC address. You can check the MAC address under

(System Settings) "System Information".

, When communicating with another system in ad hoc mode, both

systems must be set to the same channel. You can check the

currently set channel under (Network Settings) "Ad Hoc

Mode".

, If a device that causes radio interference such as a microwave oven

is nearby, system communications may not work properly.

The Web page won't display properly.

, Some Web pages may not display properly.

The system or AC Adaptor is warm.

, During use, the system or AC Adaptor may become warm. This is

not a malfunction.

, When the communication function is being used, the system may

become warmer than during normal use. This is not a malfunction.

The system is turned on, but does not operate.

, Check that the system is not in hold mode. If it is, slide the

POWER/HOLD switch up to clear hold mode.

The system does not function properly.

, Static electricity and other similar occurrences may affect the

system's operation. After unplugging the AC Adaptor from the

electrical outlet and disconnecting any other cables, remove the

Battery Pack and AC Adaptor, wait for about 30 seconds and then

restart the system.

, Slide the POWER/HOLD switch up and hold it for at least three

seconds until the POWER indicator turns off. The system will be

completely turned off. Then turn on the system again.

Photo

Network

Other issues

Before requesting service

The date and time are reset.

, If the battery is not recharged and runs out, or if the Battery Pack

is replaced, the system date and time settings may be reset. Follow

the on-screen instructions to set the time and date.

The PSP™ system is not recognised by the PC when

connected using a USB cable.

, Check that your PSP™ system is set to USB mode. If it is not,

select (USB Connection) under (Settings).

, Check that your Memory Stick Duo™ media is inserted into your

PSP™ system.

, Check that an operating system that supports USB mass storage

class is installed in the personal computer in use.

, When using a USB hub or other devices, depending on the

operating environment of the PC, the Memory Stick Duo™

inserted in the system may not be recognised by the PC. Try

connecting the system directly to the PC using a USB cable.

, If "USB Charge" under (System Settings) is set to "On", the

device may not be recognised.

The connected USB device is not recognised by the PSP™

system.

, Check that the USB connector on the top of the system is clean.

Try wiping it with a soft, dry cloth.

You forgot your password.

, If you restore default settings under (System Settings)

"Restore Default Settings", the system password will be reset to

"0000". For details, refer to the User's Guide ( page 4).

Note that if you restore default settings, settings you have adjusted

for options other than the system password will also be cleared.

Once cleared, these custom settings cannot be restored by the

system.

The analog stick does not function properly.

, At a scene where the symptoms appear, move the analog stick in a

circular motion. This will help you determine the optimum

operating range.

The PSP™ system cannot communicate with another PSP™

system in ad hoc mode and communication is

disconnected.

, If "UMD™ Cache" under (System Settings) is set to "On,"

you may not be able to communicate properly.

GUARANTEE

Troubleshooting

Thank you for buying this Product. The term "Product" means the

PSP™ system. This Guarantee does not cover any software whether or

not packaged with the Product. The system software pre-installed on

the PSP™ system is licensed to you, not sold, and is for use only as part

of the PSP™ system. The terms of such system software licence are at

http://www.scei.co.jp/psp-eula.

Sony Computer Entertainment Europe Ltd ("SCEE") guarantees that

this Product is free from defects in material and workmanship that

result in Product failure during normal usage in accordance with the

terms set out in below and will, for a period of 1 (one) year from the

date of original purchase, repair or (at SCEE's option) replace any

component part of this Product, free of charge, where it is faulty due to

defective materials or workmanship. Replacement will be with a new

or refurbished component or unit, at SCEE's option, which is

guaranteed for the remainder of the original Guarantee Period.

This Guarantee is in addition to your statutory consumer rights (under

applicable law) and does not affect them in any way.

This Guarantee is given to you by Sony Computer Entertainment

Europe Ltd of 10 Great Marlborough Street, W1F 7LP, United

Kingdom.

IMPORTANT

GUARANTEE

1. If you need to claim under this Guarantee, please call your local

Customer Service helpline (please see separate insert for helpline

details) for return instructions and other guidance.

2. This Guarantee is only valid:

i. in Russia and Ukraine; and

ii. when the original sales receipt or invoice or other proof of

purchase (indicating the date of purchase and retailer's name) is

presented together with the faulty Product (and has not been

altered or defaced since the date of original purchase); and

iii.when the Guarantee seal and the serial number on the Product

have not been damaged, altered or removed.

3. To avoid damage to or loss/erasure of removable data storage media

or peripherals, you must remove these before submitting the Product

for guarantee service.

4. Repair or replacement may involve installation of software or

firmware updates for the Product.

5. You may not claim under this Guarantee when the Product is

damaged as a result of:

i. commercial use, accident, fair wear and tear, negligence, abuse,

or misuse (including, without limitation, failure to use this

Product for its normal purpose and/or in accordance with

instructions on proper use and maintenance, or installation or use

in a manner inconsistent with applicable local technical or safety

standards);

ii. use in conjunction with any unauthorised peripheral (including,

without limitation, game enhancement devices, adaptors and

power supply devices);

iii.any adaptation or adjustment to, or alteration of, the Product

carried out for any reason, and whether properly carried out or

not;

iv. maintenance or repairs carried out other than by a SCEE

authorised service facility; or

GUARANTEE

If this Product needs any repair which is not covered by this Guarantee,

please call your local Customer Service helpline for advice (please see

separate insert for helpline details).

v. use in conjunction with unauthorised software, virus infection, or

fire, flood or other natural calamity.

6. You may not claim under this guarantee where you are in material

breach of your system software licence (see

http://www.scei.co.jp/psp-eula).

7. To the extent permitted by applicable law, this Guarantee will be

your sole and exclusive remedy in relation to defects in this Product

and all other guarantees, warranties, terms and conditions, express

or implied by statute or otherwise, in respect of this Product are

excluded and neither SCEE nor any other Sony entity, or their

suppliers or authorised service facilities, will be liable for any

special, incidental, indirect or consequential loss or damage.

Страница загружается ...

Sony PSP-3008 Black Base Руководство пользователя

Бренд: Sony

Модель: PSP-3008 Black Base

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

на других языках

English: Sony PSP-3008 Black Base User manual

Sony PSP-3008 Black Base Руководство пользователя

Sony PSP-3008 Black Base Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов