Altec Lansing MIX Инструкция по применению

Altec Lansing Mix

™

Portable Speaker for iPhone

™

and iPod

®

Mega enceinte pour iPhone

™

et iPod

®

Altec Lansing Mix

™

Altavoces portátiles Altec Lansing Mix

™

para iPhone

™

e iPod

®

Alto-falante portátil Mix

™

da Altec Lansing para iPhone

™

e iPod

®

Sistema di altoparlanti portatile Altec Lansing Mix

™

per iPhone

™

e iPod

®

Digitale Boombox Altec Lansing Mix

™

für iPhone

™

and iPod

®











®

Altec Lansing Mix

™

kannettava kaiutin laitteille iPhone

™

ja iPod

®

Altec Lansing Mix

™

bärbara högtalare för iPhone

™

och iPod

®

iMT800

User Guide Guia do Usuário 

Guide d’utilisation Manuale utente Käyttöopas

Guía del usuario Bedienungsanleitung Bruksanvisning

ii

Welcome

Thank you for purchasing the Altec Lansing Mix speaker system. Designed

speciﬁcally to work with your iPhone and iPod, this system provides high-

quality audio and radio performance that brings out the best in your music.

This Altec Lansing speaker system is compatible with all iPhone and iPod

models.

Please carefully read this User Guide for instructions on setting up and

using your Mix speaker system.

Prior to installing or operating the Altec Lansing Mix speaker system, refer

to the important product safety information.

Getting Assistance

If you cannot ﬁnd the answer to your setup and performance questions

in this package, you can also consult the FAQs in the customer support

section of our Web site at www.alteclansing.com. If you live in North

America and still can’t ﬁnd the information you need, please call our

customer service team for assistance before returning the product to your

retailer under their return policy.

Tel: 800-258-3288 (Toll Free in US and Canada)

Email: [email protected]

If you live outside of North America, please visit our website at

www.alteclansing.com and select your region to locate your

country’s distributor.

International Distribution

International customers: For information regarding the distribution of Altec

Lansing products in your country, please visit www.alteclansing.com and

click on your region.

Registering Your Product

Visit www.alteclansing.com to register your product online, so we can

provide you with the best possible service and technical support.

FCC Compliance

Changes or modiﬁcations not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

1

EN

BATTERIES

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type. Do not expose to excessive heat such as sunshine, ﬁre, or

the like. The battery used in this product must be properly recycled or disposed of.

Instructions for removing the battery can be found in the Quick Start Guide. Please

contact your local recycling center for proper battery handling and disposal instructions.

POWER SOURCE

Use only power supplies of the type speciﬁed in the operating instructions or as marked

on the appliance. If a separate power supply is included with this apparatus, do not

substitute with any other power supply – use only manufacturer-provided power supplies.

CAUTION

To prevent electric shock do not use this (polarized) plug with an extension cord,

receptacle or other outlet unless the blades can be fully inserted to prevent blade

exposure.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain

or moisture.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. This apparatus shall not be exposed to

dripping or splashing, and no objects ﬁlled with liquids, such as vases, shall be

placed on the apparatus.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not ﬁt into your outlet, consult an

electrician for the replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or table speciﬁed by the

manufacturer or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods

of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

15. Do not install in an area which impedes the access to the power plug. Disconnecting

the power plug is the only way to completely remove power to the product and must

be readily accessible at all times.

The lightning ﬂash with arrowhead, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufﬁcient

magnitude to constitute a risk of electric shock to persons.

Caution: To prevent the risk of electric shock, do not remove cover

(or back). No user-serviceable parts inside. Refer servicing to

qualiﬁed service personnel.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

Safety Information

2

Contents

Welcome ............................................................................................................................................................................................................................... ii

Safety Information ................................................................................................................................................................................................................1

Package Contents ................................................................................................................................................................................................................3

Getting Started ..................................................................................................................................................................................................................... 4

Placing and Removing Adapters for the iPhone and iPod ................................................................................................................................................... 5

Speaker Features and Indicators ......................................................................................................................................................................................... 6

Speaker Controls .................................................................................................................................................................................................................. 7

Clip-On Remote Features .....................................................................................................................................................................................................9

Listening to Your iPhone or iPod ........................................................................................................................................................................................ 11

Setting EQ Controls ............................................................................................................................................................................................................ 13

Charging your iPhone or iPod ............................................................................................................................................................................................15

Listening to the FM Radio .................................................................................................................................................................................................. 15

Listening to Additional iPhone, iPod, Non-Docking iPod or Other Audio Devices ............................................................................................................16

Personalizing the Power-On Message ............................................................................................................................................................................... 17

Maintaining Your Speaker System .....................................................................................................................................................................................17

Troubleshooting ..................................................................................................................................................................................................................18

Warranty ............................................................................................................................................................................................................................. 21

3

EN

Package Contents

AC adapter

Clip-on remote

Two 3.5 mm stereo cables

Altec Lansing Mix speaker system

Miscellaneous adapters

for iPhone and iPod

4

Getting Started

How to Install the AC Adapter

1 Connect the AC adapter cable plug

into the speaker system’s jack.

The jack is located on the back of

the system.

2 Plug the AC adapter into the

wall outlet.

How to Install the Speaker Batteries

Your Altec Lansing Mix speaker system can also be powered by 8 D-size

(LR20) batteries (not included). To install the batteries, follow the steps below:

1 Make sure that there is no iPhone

or iPod in the system’s dock

and that no other devices are

connected to the system.

2 Unplug the AC adapter from the

Mix speaker system.

3 Open the battery compartment.

The battery door is located on the bottom of the Mix speaker system.

To access it, place the unit on its back, so that the speakers are

facing the ceiling. Then simply pull the tabs to open the battery

compartment.

Caution: Do not place the unit on its top side. This may damage the

volume knob.

4 Install 8 D-size (LR20) batteries (not included) in the battery

compartment.

Make sure the batteries are correctly installed as illustrated in the

battery compartment. The batteries will provide up to 30 hours of

continuous playing time.

5 Replace the battery door.

NOTE Please discard used batteries properly.

NOTE When you are ﬁnished listening to your portable audio device,

please remember to turn both it and your speaker system off to conserve

electricity.

How to Install the Clip-On Remote Battery

The clip-on remote battery (included) is not installed at the factory. To install

the battery, follow the steps below. The battery compartment is at the back

of the remote. Push the battery compartment door in the direction of the

arrow to unlock it.

1 Open the battery door.

The battery door is located on the back

of the remote. Using your thumb, push

the battery door toward the carabiner

clip. Then lift the battery door open.

2 Position the battery (included) so it

sits in the battery holder correctly.

Make sure the polarity (the + and – sides of the battery) is correct.

3 Replace the battery door.

NOTE Please discard used batteries properly.

5

EN

Placing and Removing Adapters for the iPhone and iPod

Your Altec Lansing Mix speaker system includes removable adapters for

today’s popular iPhone and iPod models. These adapters ensure that your

iPhone and iPod properly ﬁt in the speaker system’s dock. As new iPhone

and iPod models are introduced, new adapters will be made available to

customers. You may also use the adapter supplied with your iPhone or

iPod, or available for purchase at www.apple.com.

How to Place an Adapter

1 Select the correct adapter for your

iPhone or iPod.

Using the correct adapter ensures a

proper ﬁt for your iPhone or iPod.

2 Gently press the iPhone or iPod

adapter into the dock.

Now you can carefully place your

iPhone or iPod into the dock.

NOTE Your iPhone or iPod cannot be in

a case.

How to Remove an Adapter

1 Remove your iPhone or iPod.

2 Grip the adapter and pull gently upward.

6

Speaker Features and Indicators

Universal docking station for iPhone or iPod

Guard for iPhone or iPod

LCD display

Battery indicator

FM stereo indicator

Source button

Track forward button

EQ button

AC adapter jack

Two AUX jacks

FM antenna

Power/volume increase/

volume decrease knob

Track back button

7

EN

Speaker Controls

Turn on your speaker system

Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started

section for more information. Press the

knob.

Turn off your speaker system

Press the

knob. Whenever you are ﬁnished using your speaker system, please remember to turn it and

your iPhone, iPod or other MP3 player off to conserve electricity.

Change audio source Press the “SOURCE” button to cycle through and select the audio source: iPod, FM radio, AUX 1 or AUX 2.

Set the graphic equalizer

See the Setting EQ Controls section for speciﬁc information on selecting EQ presets and adjusting the

7-band graphic EQ.

Turn up the volume

Rotate the

knob clockwise.

Turn down the volume

Rotate the

knob counter-clockwise.

Skip to the beginning of the current song

on your iPhone or iPod

In “iPod” mode, press the

button.

Rewind the currently playing track on your

iPhone or iPod

In “iPod” mode, press and hold the

button.

Skip to the beginning of the next song

on your iPhone or iPod

In “iPod” mode, press the

button.

Fast-forward the currently playing track

on your iPhone or iPod

In “iPod” mode, press and hold the

button.

Tune radio stations In “FM” mode, use the

and buttons. See the Listening to the Radio section for additional information.

8

Scan radio stations

In “FM” mode, press and hold the

or button. See the Listening to the Radio section for additional

information.

Listen to an additional iPhone, iPod, non-

docking iPod or other portable audio device

See the Listening to Additional iPhone, iPod, Non-Docking iPod or Other Portable Audio Devices section

for speciﬁc information on using devices attached to your speaker system’s AUX jacks.

Enter a personalized power-on message See the Personalizing the Power-On Message section for speciﬁc information on using this feature.

Reset all settings

With the speaker system turned on, press the

and buttons simultaneously for a few seconds. Once

the word “RESET ?” is displayed on the screen, press the

button to reset all settings.

Select FM Band region

Reset all settings (see above), and use the

and buttons to select the region closest to you (“REGION

1: USA,” “REGION 2: EUROPE/ASIA,” “REGION 3: JAPAN WIDE” or “REGION 4: JAPAN”). Then, press

the

knob to save your selection.

Check battery status

If the Mix is being powered by batteries, you can see how much battery power you have left. Press and

hold the “SOURCE” button to display the amount of battery power remaining and press it again to exit

this mode. The unit will automatically exit this mode after a few seconds.

Speaker Controls

9

EN

Clip-On Remote Features

The clip-on remote lets you operate many functions of your Altec Lansing Mix

speaker system:

Turn on your speaker system

Press the button.

Turn off your speaker system

Press the

button.

Change audio source

Press the “SOURCE” button to cycle

through and select the audio source:

iPod, FM radio, AUX 1 or AUX 2.

Turn up the volume Press the “+” button.

Turn down the volume Press the “–” button.

Skip to the beginning of the current

song on your iPhone or iPod

In “iPod” mode, press the

button.

Rewind the currently playing

track on your iPhone or iPod

In “iPod” mode, press and hold the

button.

Skip to the beginning of the next

song on your iPhone or iPod

In “iPod” mode, press the

button.

Fast-forward the currently playing

track on your iPhone or iPod

In “iPod” mode, press and hold the

button.

Set the graphic equalizer

See the Setting EQ Controls section for

speciﬁc information on selecting EQ presets

and adjusting the 7-band graphic EQ.

Power on/off buttonSource button

Play/pause button

Volume increase

button

Volume decrease

button

Track back button Track forward button

FM preset buttons

Carabineer clip

FM preset buttons

EQ button

10

Play/pause a song on your iPhone or iPod

In “iPod” mode, press the

button to begin playing a selected track. Press the button again

to pause it.

Tune radio stations

In “FM” mode, use the

or buttons. See the Listening to the Radio section for additional

information.

Seek radio stations

In “FM” mode, press and hold the

or button. See the Listening to the Radio section for

additional information.

Store a radio station

In “FM” mode, tune to the station you’d like to store, and then press and hold one of

the PRESET buttons (P1, P2, P3 or P4). See the Listening to the Radio section for

more information.

Select a preset radio station

In “FM” mode, press the PRESET button (P1, P2, P3 or P4) that corresponds to the station

you’d like to hear. See the Listening to the Radio section for more information.

NOTE For best results, aim the clip-on remote toward the Mix speaker system.

Clip-On Remote Features

11

EN

Listening to Your iPhone or iPod

1 Dock your iPhone or iPod in the

Altec Lansing Mix speaker system.

Make sure the correct adapter for

iPhone or iPod is inserted in the

speaker system’s dock. Slide the guard

down to protect the iPhone or iPod.

2 Select “iPod” mode.

Press the “SOURCE” button on your

speaker system or clip-on remote until the iPod icon appears on

the LCD.

3 Press the button on your iPhone, iPod, or clip-on remote.

Music from your iPhone or iPod will start playing. The speaker system

and the clip-on remote are capable of controlling basic functions of

3rd-generation iPod models, the iPod touch, the iPod nano and the

iPhone.

4 Adjust the volume.

Rotate the

knob on the Altec Lansing speaker system to adjust the

system volume. Or, use the “+”and “–” buttons on the clip-on remote.

5 Find your desired song.

Press the

or button on your speaker system or clip-on remote to

go to the next or previous track. Press and hold the

or button on

your speaker system or clip-on remote while the track is playing for

high-speed forward or reverse music search of the current track.

NOTE To conserve battery power, reduce the speaker system volume level.

NOTE During battery-only operation, the speaker system automatically

shuts down if no audio is detected for a few minutes. This is to conserve

battery power. Press the

button on the speaker system or the button

on the clip-on remote to turn the speaker system back on.

NOTE The speaker system is compatible with the alarm clock and sleep

timer features built into select iPhone and iPod models. For these features

to work properly, the speaker system must be connected to a wall outlet.

When an iPhone or iPod is docked, the speaker system will not shut down

automatically, enabling the alarm or sleep timer to play through the speaker

system. See the user guide for iPhone or iPod for details on how to access

these features.

NOTE During AC operation, if there is no iPhone or iPod docked and

no audio input signal is detected for a few minutes, the speaker system

automatically shuts down to conserve energy. Press the

button on the

speaker system or the

button on the clip-on remote to turn the speaker

system back on.

12

How to Access Additional Features on Your iPhone or iPod Using

the Clip-on Remote

First, select “iPod” mode.

Press the “SOURCE” button on your speaker system or clip-on remote until

the iPod icon appears on the LCD.

Shufﬂe function

Press the P1 button once on the

clip-on remote to advance to the next

shufﬂe mode:

• “Shufe S” is displayed when the

system is in song shufﬂe mode.

• “Shufe A” is displayed when the

system is in album shufﬂe mode.

• “Shufe Off” is displayed when

the shufﬂing function has been

turned off.

Note: Use the P2 button on some

older iPod models. Functionality may

vary per iPhone or iPod model.

Repeat function

Press the P2 button once on the

clip-on remote to advance to the next

repeat mode:

• “Repeat 1” is displayed when the

system is in the repeat one mode.

• “Repeat” is displayed when the

system is the repeat all mode.

• “Repeat Off” is displayed when the

repeat function has been turned off.

Note: Use the P1 button on some

older iPod models. Functionality may

vary per iPhone or iPod model.

Access the previous playlist

Press the P3 button on the clip-on

remote.

Access the next playlist

Press the P4 button on the clip-on

remote.

Listening to Your iPhone or iPod

13

EN

Setting EQ Controls

How to Set the Bass and Treble Control Using the Onboard Controls

1 Access the bass and treble settings.

Press the “EQ” button once. The Bass Control screen will appear on

the LCD.

2 Increase or decrease the bass level.

Rotate the

knob.

3 Enter the Treble Control screen.

Press the EQ button again. The Treble Control screen will appear.

4 Increase or decrease the treble level.

Rotate the

knob.

5 Exit the Treble Control screen.

Press the “EQ” button again. Or the unit will automatically exit this

screen after a few seconds.

How to Set the Bass and Treble Control Using the Clip-On Remote

1 Access the bass and treble settings.

Press the “EQ” button once. The Bass Control screen will appear on

the LCD.

2 Increase or decrease the bass level.

Press the “+” or “–” buttons.

3 Enter the Treble Control screen.

Press the “EQ” button again. The Treble Control screen will appear.

4 Increase or decrease the treble level.

Press the “+” or “–” buttons.

5 Exit the Treble Control screen.

Press the “EQ” button again. Or the unit will automatically exit this

screen after a few seconds.

How to Change the EQ Presets Using the Onboard Controls

1 Access the EQ presets.

Press and hold the “EQ” button for approximately 3 seconds.

2 Select your desired preset.

Press the

or buttons to cycle through the four EQ presets.

Presets include: 1) ALTEC EQ, 2) ROCK, 3) HIP HOP, and 4) POP.

3 Exit the EQ Preset screen.

Press the “EQ” button again. Or the unit will automatically exit this

screen after a few seconds.

NOTE: To reset the EQ Presets to factory settings, press and hold the EQ

button for a few seconds.

How to Change the EQ Presets Using the Clip-On Remote

1 Access the EQ presets.

Press and hold the “EQ” button for approximately 3 seconds.

2 Select your desired preset.

Press the

or buttons to cycle through the four EQ presets.

Presets include: 1) ALTEC EQ, 2) ROCK, 3) HIP HOP, and 4) POP. Or,

press P1 for ALTEC EQ, P2 for ROCK, P3 for HIP HOP or P4 for POP.

3 Exit the EQ Preset screen.

Press the “EQ” button again. Or the unit will automatically exit this

screen after a few seconds.

14

NOTE You can personalize the EQ presets by selecting a Preset EQ then

pressing the “EQ” button twice to enter the Bass/Treble Control Mode.

There you can make adjustments to the Preset EQs as described in the

Bass and Treble Control sections. Changes are saved automatically.

NOTE: To reset the EQ Presets to factory settings, press and hold the EQ

button for a few seconds.

How to Adjust the 7-Band Graphic EQ Using the Onboard Controls

For even greater personalization of your music, you can dial in your sound

with the onboard 7-band graphic EQ.

1 Enter the Graphic EQ Mode.

Press and hold the “EQ” button while you press the

or buttons.

2 Select a frequency slider for adjustment.

Press the

or buttons until the desired slider is highlighted.

3 Increase or decrease the level of the frequency slider.

Rotate the

knob.

4 Select the next frequency slider for adjustment.

Press the

or buttons until the next desired slider is highlighted.

5 Increase or decrease the level of the frequency slider.

Rotate the

knob.

6 Continue selecting and adjusting frequency sliders as desired.

7 Exit the Graphic EQ Mode.

Press the “EQ” button again. Or the unit will automatically exit this

mode after several seconds.

NOTE: To reset the Graphic EQ to factory settings, press and hold the “EQ”

button for a few seconds.

How to Adjust the 7-Band Graphic EQ Using the Clip-On Remote

1 Enter the Graphic EQ Mode.

On the speaker system, press and hold the “EQ” button while you

press the

or buttons.

2 Select a frequency slider to adjust.

Press the

or buttons on the clip-on remote until the desired slider

is highlighted.

3 Increase or decrease the level of the frequency slider.

Press the + or “–” buttons on the clip-on remote.

4 Select the next frequency slider to adjust.

Press the

or buttons on the clip-on remote until the next desired

slider is highlighted.

5 Increase or decrease the level of the frequency slider.

Press the “+” or “–” buttons on the clip-on remote.

6 Continue selecting and adjusting frequency sliders as desired.

7 Exit the Graphic EQ Mode.

Press the “EQ” button on either the clip-on remote or the speaker

system. Or the unit will automatically exit this mode after several

seconds.

NOTE: To reset the Graphic EQ to factory settings, press and hold the “EQ”

button for a few seconds.

Setting EQ Controls

15

EN

Whenever your iPhone or iPod is docked and your Altec Lansing inMotion

Max speaker system is plugged into an AC outlet, your iPhone or iPod is

charging (until fully charged) – even if the speaker system is switched off.

CAUTION: The iPhone or iPod will not charge when the speaker system is

operating on batteries.

Listening to the FM Radio

1 Extend the FM antenna fully for

best FM reception.

2 Select “FM” mode.

Press the “SOURCE” button on your

speaker system or clip-on remote until

“FM” appears on the LCD.

3 Tune to the station you want to

listen to.

Use the

or buttons on your

speaker system or enhanced remote to

tune in the desired station. Press and

hold these same buttons to ﬁnd the next clear FM station.

4 Adjust the volume.

Use the

knob on your speaker system to adjust the system

volume. Or, use the “+” and “–” buttons on the clip-on remote.

How to Store Preset Stations

Your Altec Lansing Mix speaker system’s clip-on remote enables you to

program up to 4 FM station presets:

1 Tune to the station you wish to store.

While in “FM” mode, use the

or buttons on your speaker system

or clip-on remote to tune to the desired station.

2 Store the station.

Press and hold the P1, P2, P3 or P4 button on the clip-on remote for

a few seconds. You can store one FM station in each preset.

3 To store other stations, repeat the above steps.

How to Recall Preset Stations

1 Make sure you are in “FM” mode.

If you’re not in “FM” mode, press the “SOURCE” button on your

speaker system or clip-on remote until “FM” appears on the LCD.

2 Press a PRESET button (P1, P2, P3 or P4) on the clip-on

remote.

The radio will tune to your preset station.

3 Adjust the volume.

Use the

knob on your speaker system to adjust the system

volume. Or, use the “+” and “–” buttons on the clip-on remote.

Charging Your iPhone or iPod

FM

16

If you or a friend has an iPhone, iPod, non-iPod MP3 player or other

non-docking audio device, you can enjoy it through your Altec Lansing

Mix speaker system as well. Just connect it via the AUX 1 or AUX 2 jack.

Here’s how:

1 Locate one of the two 3.5 mm

stereo cables ( included).

2 Plug one end of the stereo cable

into your device.

Your device should have either a

headphone or LINE OUT jack for you

to plug into.

3 Plug the other end of the stereo

cable into your speaker system’s

AUX 1 or AUX 2 jack.

The AUX jacks are located on the top of the speaker system next to

the handle.

4 Select “AUX 1” or “AUX 2” mode.

Press the “SOURCE” button on your speaker system or the clip-on

remote until “Auxiliary Input 1” or “Auxiliary Input 2” appears on the

speaker system’s LCD.

5 Turn on your device and start playing it.

6 Adjust the volume.

Use the

knob on the speaker system to adjust the volume. Or, use

the “+” and “–” buttons on the clip-on remote.

NOTE You may need to adjust the device volume also. Your device’s

volume should be set to approximately ¾ volume.

Listening to Additional iPhone, iPod, Non-Docking iPod or Other Audio Devices

17

EN

Whenever you turn on your Altec Lansing Mix speaker system, the

Altec Lansing logo will appear for approximately 3 seconds followed

by a personalized message, if you’ve set one. The Mix comes with no

preset power-on message. To create a personalized message, just follow

these instructions:

1 Enter the Message Screen Edit Mode.

Press and hold the “SOURCE,” “EQ,”

and buttons. All four

buttons must be pressed at approximately the same time while the

Altec Lansing logo is displayed. The following message will appear on

the LCD: “Add a personal message by selecting letters with the track

buttons and rotary control.”

2 Add your personal message.

Rotate the

knob until the desired letter, number or symbol is

displayed. Press the

button to make your selection and move to

the next space. Continue this process until your entire message is

displayed.

3 Exit the Message Screen Edit Mode.

Press the

knob to save the message and exit the Message Screen

Edit Mode.

How to Delete a Personalized Message

1 Enter the Message Screen Edit Mode.

Press and hold the “SOURCE,” “EQ,”

and buttons. All four

buttons must be pressed at approximately the same time while the

Altec Lansing logo is displayed. The following message will appear on

the LCD: “Add a personal message by selecting letters with the track

buttons and rotary control.”

2 Clear the message.

Press the “SOURCE” button to clear the message.

3 Exit the Message Screen Edit Mode.

Press the

knob to exit the Message Screen Edit Mode.

Maintaining Your Speaker System

Place your speaker system on a level surface away from sources of direct

sunlight or excessive heat.

Protect your furniture with a cloth or other protective material when placing

your speaker system on a natural wood or lacquered ﬁnish.

Clean your speaker system with a soft cloth moistened only with mild soap

and water. Stronger cleaning agents, such as benzene, thinner or similar

materials, can damage the surface of the unit.

Personalizing the Power-On Message

18

Troubleshooting

Symptom Possible Problem Solution

Speaker system doesn’t

respond (no power)

AC adapter isn’t plugged into a wall outlet

or the connector isn’t plugged into the

power supply jack on the back of the

speaker system.

Plug the AC adapter into a wall outlet and plug the connector into the power

supply jack on the back of the speaker system.

Wall outlet is not functioning. Plug another device into the same outlet to conﬁrm the outlet is working.

The batteries are dead. Replace with new batteries. (See the Getting Started section for details.)

The power isn’t turned on.

Turn on the speaker system by pressing the

button. The LCD display

turns on.

iPhone or iPod doesn’t

dock properly

Using the wrong adapter for iPhone or

iPod or no adapter.

Make sure the adapter is the proper ﬁt for your iPhone or iPod.

iPhone or iPod didn’t install properly. Remove your iPhone or iPod from the dock and check for obstruction on the

connectors in the dock and on your iPhone or iPod. Then reseat it in the dock

and slide the guard down to protect it.

Страница загружается ...

Altec Lansing MIX Инструкция по применению

Это руководство также подходит для

Altec Lansing MIX Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов