1
ALcom G-1100
GSM Wireless Business
Telephone
User’s Guide
(V 1.1)
2
1. Precautions....................................................... 3
2. Manual Specification ........................................ 3
3. Overview........................................................... 4
3.1 Unpacking Check........................................................................4
3.2 Installation ..................................................................................4
3.3 Appearance of Component .........................................................5
4. General Function.............................................. 7
4.1 Key Function...............................................................................7
4.2 Menu Function ............................................................................8
4.3 Quick Operation Guide ...............................................................9
4.3.1 Making a call........................................................................9
4.3.2 Dial number in telephone book ............................................9
4.3.3 Answering call .....................................................................9
4.3.4 Ending call ...........................................................................9
4.3.5 Refuse call.........................................................................10
4.3.6 Redial ................................................................................10
4.3.7 Adjust handset volume ......................................................10
4.3.8 Hand free...........................................................................10
4.4 Menu Function Introduction ......................................................10
4.4.1 Message ............................................................................10
4.4.2 Call log...............................................................................11
4.4.3 PB (Pone Book).................................................................12
4.4.4 Setting ...............................................................................12
4.4.5 Call Service .......................................................................13
4.5 Input Method.............................................................................14
4.5.1 Switch input method ..........................................................14
4.5.2 Input symbol ......................................................................14
4.5.3 Special symbol table..........................................................14
4.5.4 T9 associated English word input method .........................14
5. Technical Parameters..................................... 18
6. Abbreviations.................................................. 18
7. Troubleshooting.............................................. 19
3
Thank you for using our product. Please read through this guide to
use the device properly.
1. Precautions
When you use the telephone, please be sure to do as following
instructions, to avoid unnecessary damage or law-breaking behavior.
• Do not use the telephone on aboard and air-plane.
• Do not use the telephone around gas station, oil depot, chemistry
factory or places with combustible and explosive substances.
• Do not use the telephone while driving.
• While using the telephone, please keep away from equipment or
devices that might disturbed easily.
• The telephone in working might disturb functioning of some
medical equipment.
• Please clean the telephone with moistish or anti-electrostatic cloth
and avoid dry or electrostatic material. Please do not use chemical
detergent and keep it turn off when cleaning.
• Do not keep it in exposure of sunshine and avoid direct strong light.
• Try the best to avoid using in moist or dusty environment.
• Prevent any liquids into the device or it will get damaged.
• Do not throw or knock the telephone with force. Any rough
treatment might impair the circuit in the telephone.
• Do not connect with any equipment that don’t match the telephone.
• You should know about local regulations about wireless telephone
usage and abide by them in using.
• Only the specific power adapter or battery that the factory defined
can be use on the telephone.
• Replace used batteries incorrectly and use other power adapters
made by other manufacturers might cause damage.
• This telephone adopts a special encrypted SIM card. Do not try to
use the SIM card for other purpose and do not try to use SIM card
of other equiment in this telephone, which will cause the SIM card
locked or permanent damage.
2. Manual Specification
- The contents in [[ ]] represents the key of the telephone keyboard.
For example: [[OK]] represents the OK key of the keyboard.
- The contents in [ ] represents the keys on the display. For example:
[PB] represents the “Phone Book” key on the display.
- Some words in telephone menu are in short. In case of users’s
confusion we made an abbreviation table as chapter 6.
3. Overview
3.1 Unpacking Check
The telephone composes by the following parts:
Host
Handset and the
handset cord
Power Adapter
Antenna (SMA or
TNC)
Spare Battery
3.2 Installation
3.2.1 Installing the handset
4
5
3.2.1 Installing the antenna
3.2.3 Installing the power adapter
3.2.4 Installing the battery
- Push the locker along the arrow;take the cover out.
- Put battery into case and connect the jack; put the cover on and
push it until you hear “kata”.
3.3 Appearance of Component
Update
jack
Headset jack
Power
switch
Power
jack
Antenna
jack
Hand free
transmitter
6
7
Pilot lamp Screen
Headset
Pilot lamp Describe
Power
lamp
The designation of power supply in effect, and after
boot-strap, the power lamp keeps bright.
On-line
lamp
When handfree, the lamp bright.
4. General Function
4.1 Key Function
Keyboard layout:
POWER
ONLINE
MUTE
HANGUP
▲
▼
1 2 3 OK
4 5 6 CANCEL
7 8 9 SEND
* 0 #
SCREAN
Note: The position of and [[SEND]] is different by different
telephone.
Key description:
[[
]]: Press it to perform the functions show at the left-hand side of the
display.
[[
]]: Press it to perform the functions show at the right-hand side of
the display.
[[▼]]: At stand-by status, press it to enter call log. At menu status,
press it to go up the menu; during a call press it to increase volume.
[[▲]]: At stand-by status, press it to enter messages status. At menu
status, press it to go down the menu; during a call press it to decrease
volume.
[[MUTE]]: During a call, press it to turn on or off the transmitter.
[[HANGUP]]: At menu status, press it to return stand-by interface;
when dialing, press it to end dialing; during a call, press it to end the call;
press it to refuse an incoming call.
[[OK]]: Press it to carry out the function on the right-hand side of the
display.
[[CANCEL]]: Press it to carry out the function on the left-hand side of
the display.
: Press it to dial a speaker call, at stand-by status; press it to make
a speaker call with an on-hook dialing; press it to end a speaker dialing;
press it to end a speaker call; If you choose autocall (“Menu → Setting →
Autocall”) 2-10 seconds after dialing, you will be automatically connected
with the number you dial.
[[SEND]]: After entering telephone book, press it to make an outgoing
call. Press it to call the current number in the telephone book.
[[ 0 ]]-[[ 9 ]]: Press the keys to enter numbers to make handset dialing
or on-hook dialing; At menu status, press the keys to choose
corresponding menu. After the first number dialed, press ‘0’ for a few
seconds to have a ‘+’ entered.
[[ * ]]: Press it to input ‘*’.
[[ # ]]: Press it to input the ‘#’.
Note: The Function of the keys above at input status, please refer to Input
Mothod description.
4.2 Menu Function
When talking, press [menu], user could do some operation about
switching calling, PB, message etc.
- Switching calling: You can create a new call with holding current
call. Need net service.
- PB: User could do operation of the phone book.
- Message : User could receive message, send message and save
8
9
message. Or do message setting and broadcast setting etc.
4.3 Quick Operation Guide
Before using the telephone, user should make sure that the power is
on and the correct SIM card is inserted. User could use the telephone till
the name of network supplier appeared in the display.
If the power has been on, but user did not insert SIM card, telephone
prompts to insert SIM card and check it whether it could be used or not.
Warning: Please power off you phone before changing the SIM card.
To plug in or out the SIM card when connected to outer power source or
battery is forbidden. Please don’t touch the metal surface of the SIM card
that information in the card may be lost or destroyed. Put the card away
from electricity and magnetism as you can. If SIM card is damaged, the
device can’t connect the network.
4.3.1 Making a call
- Off-Hook or pressing will hear the dial tone, then user
can dial number.
- In standby mode, enter telephone number, Off-Hook or
press
or [[SEND]] to send a call.
- The display shows the digit that user entered. User can
press [[CANCEL]] or “Delete” to delete the latest digit when
find the incorrect number.
- After inputting the number, press [[Send]] or wait a few
seconds (user could modify the time by setting “AutoCall”
in setting menu) to send a call.
- Answer a call, the calling time will be showed on the
screen.
- In talking mode, press [[▲]] or [[▼]] could adjust the
handset volume.
4.3.2 Dial number in telephone book
In telephone book, press [[▲]] or [[▼]] to find the number user
want to dial. Pressing [[SEND]] to call it after finding the number.
4.3.3 Answering call
When in ringing mode, take up the handset or press to
answer the call.
4.3.4 Ending call
There are different ways to end call in two status.
Press
to end call in Hand free mode.
Press [[HANGUP]] to finish a call.
4.3.5 Refuse call
When in ringing mode, press [[HANGUP]] to refuse the call.
4.3.6 Redial
When in standby mode, press [[SEND]] twice to call the latest
number.
4.3.7 Adjust handset volume
When in in-call mode, press [[▲]] or [[▼]] to set volume.
4.3.8 Hand free
When in standby mode, press to enter Hand free mode.
4.4 Menu Function Introduction
4.4.1 Message
4.4.1.1 “Write message”
- Please confirm that the message servicecenter number
has been set before writing message.
- In standby mode, press [[▼]] or select [Menu], [Message]
to enter the submenu “Write message” to enter message
text (please refer to 4.5 “Input method”).
- After finishing new message, user can take the operation of
“Send”, “Send More”, “Insert Word”, “Save” and “Save &
Send”.
4.4.1.2 “Inbox”
z View received messages and show status (readed or
not), the received date and time, sender’s number or
name (the number must exist in phone book). After
receiving message, the phone will play an alert tone to
inform you and the new message icon will appear on the
screen. If not immediately read, the message will be
saved to SIM card automatically. Including messages in
the Inbox and the Outbox, the number of messages
telephone can hold is up to the SIM card capacity and
phone memory capacity. So please delete the old
message you don’t need.
z Press [[▲]] or [[▼]] to browse message.
z When view message list, press “Read” to read details
and press [Option] to do the following operation:
- Select “Answer” to reply a message.
- Select “Forward” to take the operation of “Send”,
“Send More”, “Insert Word”, “Save”, “Save & Send”.
- Select “Use number” to get the number from the
current message and save to Phone Book.
- Select “Call” to send a call which send the message.
- Select “Delete” to delete the message.
10
11
- Select “Delete All” to delete all received messages.
4.4.1.3 “Outbox”
z View the sending message will show the sending state
and the sender’s number
z or name (the number must exist in telephone book).
z Press [[▲]] or [[▼]] to browse message.
z When view message list, press “Read” to read details
and press [Option] to do the following operation:
- Select “Send” to resend the message.
- Select “Edit” to edit the message again, then take
operation of “Send ”, “Send More”, “Insert Word”,
“Save” and “Save & Send”.
- Select “Delete” to delete the message.
- Select “Delete All” to delete all messages in
“Outbox”.
4.4.1.4 “SMS Setting”
Before using message function, user need do some
necessary setting. There are several submenu in “SMS Setting”
menu:
z “Valid period”
During message period, SMS center will repeatedly send
the short message until received. Press [[▲]] or [[▼]] to
set the message period: max; 1 hour; 6 hour; 24 hour;
72hour; 1 week.
Note: The function needs the support of network service
provider.
z “Service center”
Select “Service center”, press [OK] to input the message
service center number (you should contact with network
service provider to obtain it).
z “Insert Word”
There are ten messages can be choosed to use or edit.
z “Status report”
If the option is enabled, in the case of the recipient
receiving the message sent by you, the SMS center will
inform you in the form of a Status Report message.
z “Space”
Display the space status of the telephone memory and
SIM card.
4.4.2 Call log
The device has saved for you the latest twenty missed calls,
latest twenty received calls and latest twenty dialed calls.
In standby mode, press [[▲]] or select “Call log” in main
menu to enter the call log submenu which including “Missed
calls”, “Received calls”, “Dialed calls”, “Call timers”. Press
[[▲]] or [[▼]] to select and press [OK] to display record. Under
submenu of “Missed”, “Received”, “Dialed”, user can take
operation of “Save”, “Delete”, “Call”, “Send message”, “Delete
all”.
4.4.3 PB (Pone Book)
When in standby mode, press the [[ ]] to enter phone book
submenu.
4.4.3.1 “Find”
z Input the name to be found. Then press [[OK]].
z The following operation can be taken in displaying
telephone number list.
- Press [[▲]] or [[▼]] to view item.
- Press [[Send]] to send a call.
- Press [Detail] to view the particular content. Then, if
press [Operate] to take “Send message”, “Call”,
“Modify” or “Erase” operation.
4.4.3.2 “Add”
The telephone number can be to saved to “SIM” or “Phone”.
After selecting the saving mode, press [OK] to input name
and number.
4.4.3.3 “Erase All”
User can delete the record in SIM card or in phone with
selecting “SIM all” or “Phone all” submenu.
4.4.3.4 “Copy All”
User could copy the records “From SIM to Phone” or
“From Phone to SIM”.
4.4.3.5 “MSISDN”
Display the telephone number. If there is no number in SIM
card, user can edit it.
4.4.3.6 “Used Space”
Display the usage status about PB in the telephone
memory and SIM card.
4.4.4 Setting
User can configure the phone according to different usage.
4.4.4.1 “Ring & Volume”
z “Select ring”: There are twenty ringtone to choose (the
first five types are common ringtone, and the rest are
chords). And there are three types message alert to
choose.
12
13
z “Volume”: User can change the items as follows: call
ring, Msg ring and speaker volume.
4.4.4.2 “Alarm”: Set the alarm type and alarm time. There
are two alarm to choose.
4.4.4.3 “Time and date”: Set time and date.
4.4.4.4 “Display set”
z “Back light”: Set the duration of back light.
z “Contrast”: Press [[▲]] or [[▼]] to modify contrast of
sreen.
4.4.4.5 “Security set”: Open or close the function of PIN
checking. If user want to modify PIN must opend the
PIN check first.
4.4.4.6 “AutoCall”: If user don’t press “SEND” key after
entering the digit the telephone will automatically
send a call. The duration can be set from 2 seconds
to 10 seconds.
Note: The function must be used under Off-Hook or in
“Handfree” mode.
4.4.4.7 “Reset”: Select to reset the parameter of the phone of
factory settings.
4.4.5 Call Service
Note: The following service needs the support of the network
server.
4.4.5.1 ”Select network”: User could choose “Auto” mode or
“Manual” mode.
4.4.5.2 “Call diverts”: Support different “Call diverts”
service including: “Divert All Call”, “When busy”,
“No answer”, “Not reachable”, “Cancel all”.
4.4.5.3 “Call waiting”: Open, close and query the “Call
waiting” service.
4.4.5.4 “Call bar”: Support different “Call bar” service
including “Bar All MO Call”, “Bar All MT Call”, “Bar
MT Call ROAM”, “Bar MO Call INTL” and “Bar MO
Call EXHC”.
4.4.5.5 “Outgoing unshown”: query the “Outgoing
unshown” service.
4.4.5.6 “Speed Dial”: User could add and delete the “Speed
Dial” item.
4.4.5.7 “Band Select”: Select the band according to the
network service.
4.5 Input Method
The device support T9 input method with associated input
function, user can input the number, the symbol, english letter (including
capital letter and small letter).
4.5.1 Switch input method
User can press the button [[ # ]] to switch the input method among
number input method, the symbol input method, associated English word
input method (including capital letter and small letter). In English letter input
method, press the button [[ * ]] to switch the capital letter and small letter.
input method
prompt
input method Description
РУС Russian word Associated Russian
capital word input
Abc
Russian and English
letter.
Each new word from
capital letter
abc Russian and English
small letter
Input small letter
ABC Russian and English
capital letter
Input capital letter
123 Nnumber Input number
EN English word Associated English
capital word input
4.5.2 Input symbol
In the number input method, english letter input method, associated
English word input method, user will enter the symbol input mode after
pressing the button [[ 1 ]].
4.5.3 Special symbol table
User can use the following symbol in the special symbol input
status.
. , ? ! ’ - 1 : ; ”
⋅
\ @ / % & # ( ) « » [
] { } < >
€
$ £ ¢ A A
| + = *
~
^ _ ' A
4.5.4 T9 associated English word input method
4.5.4.1 T9 English input method
User can use T9 associated English word input method in editing
telephone book and SMS showed as the following figures.
14
15
4.5.4.2 Buttons about T9 associated English word input
method
● [[Cancel]]: Press this key to delete a letter or a blank space.
● [[OK]]: In inputing English word, press this key to confirm the
inputing pluse a blank space.
● [[▼]], [[▲]], [[
]] and [[ ]]: In inputing an English word press this
key to choose associated English words before pressing [[OK]].
● [[ # ]]: switching the input method.
● [[ * ]]: In English letter input or associated English word input, press
[[ * ]] to switch the capital letter or small letter.
● [[ 0 ]]: input space character.
● [[ 1 ]]: input sign.
● [[ 2 ]]-[[ 9 ]]: input English letters.
● [[Hangup]]: untread English letter input pattern and return to waiting
surface.
16
4.5.4.3 Keyboard layout
Name Input
Method
Status
Output
РУС, EN Space
Abc, abc,
ABC
Space, "0"
0
123 "0"
РУС
associated Russian word input method
(symbols)
Abc, abc,
ABC
Switch each kind of signs
123 "1"
1
EN associated English word input method
РУС associated Russian word input method
Abc абвг2abc, each new word from capital letter
abc абвг2abc
ABC АБВГ2ABC
123 "2"
2
EN associated English word input method
РУС associated Russian word input method
Abc деёжз3def, each new word from capital letter
abc деёжз3def
ABC ДЕЁЖЗ3DEF
123 "3"
3
EN associated English word input method
РУС associated Russian word input method
Abc ийкл4ghi, each new word from capital letter
abc ийкл4ghi
ABC ИЙКЛ4GHI
123 "4"
4
EN associated English word input method
РУС associated Russian word input method
Abc мноп5jkl, each new word from capital letter
abc мноп5jkl
ABC МНОП5JKL
123 "5"
5
EN associated English word input method
6
РУС associated Russian word input method
17
Abc рсту6mno, each new word from capital letter
abc рсту6mno
ABC РСТУ6MNO
123 "6"
EN associated English word input method
РУС associated Russian word input method
Abc фхцч7pqrs, each new word from capital letter
abc фхцч7pqrs
ABC ФХЦЧ7PQRS
123 "7"
7
EN associated English word input method
РУС associated Russian word input method
Abc шщъы8tuv, each new word from capital letter
abc шщъы8tuv
ABC ШЩЪЫ8TUV
123 "8"
8
EN associated English word input method
РУС associated Russian word input method
Abc ьэюя9wxyz, each new word from capital letter
abc ьэюя9wxyz
ABC ЬЭЮЯ9WXYZ
123 "9"
9
EN associated English word input method
18
5. Technical Parameters
Item Description
Dimensions 219mm х 168mm х 53mm (W x D x H)
Weight (including spare
battery)
Less than 700g
Mounting method Horizontal or wall mounting
Input voltage
AC: 90V to 264V (50Hz to 60Hz)
DC: 5.2V±5%, 1.0A
Spare battery
Type: AA NiMH
Capacity: 3.6V/1600mAh
Max. transmit power 2W
Typical stand-by power
consumption
0.05W
Operating temperature
0°C to 40°C
Storage temperature
-10°C to 50°C
Operating humidity 5% to 90%
6. Abbreviations
Abbreviation Description
SIM Subscriber Identity Module
ME Mobile Equipment
PB Phone Book
SC Service Center
CB Cell Broadcast
SEL Select
FDN Fixed Dialing Number
CFU Call Forward Unconditionally
SS Supplementary Service
CLIP Calling Line Identification Presentation
CLIR Calling Line Identification Restriction
COLP Connected Line Identification Presentation
COLR Connected Line Identification Restriction
AOC Advice of Charge
ACM Accumulated call meter
ACMMAX Accumulated call meter maximum
19
7. Troubleshooting
Problem
Corrective Action
Boot-strap disable
1. The power switch is off
2. The batteries cannot supply enough energy
3. The power adapter is off
PIN incorrect
1. Insert wrong SIM card
2. SIM card is locked，and the telephone should
be initialized by professional.
Loss connection in
talking
1. The batteries energy is low
2. Signal intensity is low
Volume low Press [[▲]] while Talking
For enquiries please contact:
ALcom XXI, s.r.o., Vinohradska 184, Prague, 3,130 00, CZ
Tel.: +42 02 96 32 56 86
E-mail: alcom@ ok.cz
For enquiries in the CIS and Baltic countries please contact:
ALcom CIS, 115093, 3-rd Pavlovsky side-street, bld 57
Moscow, Russia
Tel.: +7 495 109 88 77
Fax: +7 495 737 78 19
E-mail:
20
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/