Vestfrost VLS 064 RF Instructions For Use Manual

Model VLS 064 RF

Combined Icelined Refrigerator/Waterpacks Freezer

GB Instructions for use

FR Consignes d’utilisation

ES Instrucciones para el uso



CHI 使用说明



+43ºC

+10ºC

+43ºC

+10ºC

General Information

The VLS 064 RF is an ice-lined vaccine

refrigerator (+2 to +8°C) equipped with

basket. It has one compartment for storage

of vaccine and one compartment for

freezing and storage of water packs.

Power supply

The VLS 064 RF is equipped with a heavy-

duty compressor that can operate at

voltages 22% below nominal voltage. See

the rating plate. If voltage variations go

beyond this range, it is recommended to

use an automatic voltage stabilizer.

Technical data

See the rating plate, which is placed at the

rear side of the appliance.

Unpacking and installation

Unpacking

1. Unpack the appliance and check that it

has not been damaged. If you observe any

damage, inform your supervisor.

2. Check the rating for correct voltage and



3. Open and remove all internal packing

material.

Warning: For your own saftey, no person

must attempt to lift this appliance

without aid.

Contents

General information ....................................2

Power supply ..............................................2

Technical data.............................................2

Unpacking...................................................2

Get to know your refrigerator ......................3

Installation ..................................................4

Electrical connection...................................5

Operation and function ...............................6

Cool down of the appliance ........................6

Loading the appliance ................................7

Freezing waterpacks ..................................7

Maintenance and cleaning..........................8

Trouble shooting .........................................9

Warranty, Spare parts and service ...........10

Wiring diagram .........................................13

Disposal ...................................................14



without prior notice.

2

GB

Get to know your Refrigerator

Handle

Lid

Sealing strip

Inner lid

Vaccine storage

Freezing

Compartment

Compressor

compartment

with ventilation

grille

Temperature

display

Fig. 1

Basket

Bottom grate

3

GB

Location

The appliance must be placed in a well

ventilated room, not in direct sunlight and

away from other heating sources.

When installing the appliance please





Installation

100 mm

50 mm

800 mm

There must be at least 30 mm clearance

between the base of the appliance and the



There must be free access to



Fig. 2

Fig. 3

4

GB

Preparation



-



earthed.

Colour code for leads:

Lead of cord Pin of plug

230 V 115 V

Brown White Live

Blue Black Neutral

Green/Yellow Green Earth

Connect the plug to the socket and switch

on the appliance.

- Check, by listening, that the compressor is

running, if it does not run, contact your

supervisor.

The green indicator lamp located in the

control panel will illuminate when the unit is

connected to voltage supply

Recommended Voltage stabilizer:

Sollatek voltage stabilizer type SVS04-22 or

equivalent.

Electrical connection

Wiring and connections in power supply

systems must been all applicable (local and

national) electrical codes. Consult these

codes lengths and sizes prior to cabinet

installation.

This device complies with relevant EU

directives including Low Voltage Directive

2006/95 EEC. and Electromagnetic Com-

patibility Directive 2004/108/EC

The socket should be freely accessible.

Connect the appliance only to 220-240V

50Hz & 208-230V 60Hz alternating current

via a correctly installed earthed socket.

The socket must be fused with a 10A - 13A

fuse.

If the appliance is to be operated in a non-

European country, check on the rating plate

whether the indicated voltage and current

type correspond to the values of your mains

supply.

Information regarding voltage, current or

power are given on the rating plate

The power cord may be replaced by a

technician only.

The rating plate provides various techni-

cal information as well as type and serial

number.

5

GB

Operation and function

Electronic thermostat

The appliance has an electronic thermostat

that controls the temperature in the vaccine

compartment. The thermostat is set by the

factory.

1. The green diode is on when the

appliance is connected to the power

supply.

2. Solar Thermometer.

Starting procedure

Connect the mains lead to the power



indicate that the appliance is operating. The

electronic thermostat makes a self test, 20

seconds before the compressor starts.

Temperature control

It is recommended to check the inside

temperature with an accurate thermometer

twice a day. The inside temperature must

be checked regularly according to WHO’s



Cool down of the appliance

Before the appliance is loaded with

vaccines the ice-lining must be frozen. To

ensure that the ice-lining is frozen do the

following:

1. Place a thermometer in the top basket.

2. Let the refrigerator run for at least 48

Hours before loading vaccine.

3. Check the temperature in the vaccine

compartment

(must be between +2° and +8°C).

The temperature in the vaccine

compartment must always be monitored

on the thermometer and be within the

range +2° to +8°C. Due to tolerance of the

thermostat you should always control the

temperature during cool down.



The green diode

indicates that

there is power.

1. Green diode

°C

+4

2. Solar-thermometer

6

GB

Loading the appliance

Loading vaccines

When the temperature in the vaccine

compartment has stabilized, i.e. and the

temperature is between +2° and +8°C and

the compressor stops and starts, vaccines

can be loaded.

To ensure air-circulation and prevent too

low vaccine temperature, direct contact to

the inside walls must be avoided in the top

section of the cooler.

Fig. 5

Fig. 7

The VLS 064 RF has a freezing capacity

of 3 x 0.6 liter water packs /24h. Storage

capacity is 6x 0,6 liter water packs.

- Place the 3 water packs in the slot

nearest center of the unit

- Place the lid on top of the freezing

compartment

- The water packs will be frozen after 24h

- Move the frozen water packs to the 2.

slot for storage

The unit is ready to freeze the next batch

of water packs

Freezing water packs

Cold surface

Avoid direct contact

Fig. 6

7

GB

Daily maintenance:

The temperature in the vaccine

compartment must always be monitored

on the thermometer every day. Please note

that the vaccine in the appliance may not

freeze.

Weekly maintenance:

During normal use, water can accumulate

at the bottom of the appliance; remove with

a cloth or through the drainage hole.

Wipe of water droplets on the inside wall at

the same time.

Under certain ambient conditions, rime can

form on the inside wall. Remove the rime

without using sharp edged tools.

Check if lid gasket is sealing tight to the top

frame when the lid is closed. A tight sealing

lid reduces accumulation of water and for-



Monthly maintenance:

Clean the grill on the right side of the

refrigerator once each month.

Yearly maintenance:

Electric connections and components are

to be checked and cleaned once a year or

more if necessary.

Maintenance and cleaning

Cleaning

Disconnect the power supply before

cleaning. The best way to clean the

appliance is by using luke warm water with

a small amount of unscented detergent.

Never use cleaning agents that scour. Use

a soft cloth. Rinse with clean water and dry

thoroughly. It is important to prevent water

from running into the control panel.

The sealing strip around the lid must be

cleaned regularly to prevent discolouration

and prolong service life. Use clean water.

After cleaning the sealing strip, check that it

continues to provide a tight seal.

If the appliance is not being used for any

period of time, switch off the appliance,

disconnect the power supply, empty the

appliance, clean the inside, and leave the

lid open to allow air circulation and prevent

smells.

8

GB

Trouble shooting

Fault Possible cause Remedy

Compressor is not

running

Be patient, it is most likely that the

compressor will start within a few

minutes.

If this is not the case, check the fol-

lowing:

- Check that power is connected.

- Check the fuse and replace it if

necessary.

- If the above is OK, call technical

supervisor.

Compressor is running,

and the temperature is

too high

The ventilation grille is blocked.

The lid is not closed properly.

The temperature in the room in which

the appliance is installed is too high.

Ensure unhindered air circulation.

Ensure that the lid is closed properly.

Shield the appliance against direct

sun light and ensure more ventilation

to the room.

No temperature is

displayed

The thermometer is broken.

There is not enough light for the solar

sensor.

Change the thermometer.

Turn on the light.

9

GB

Produkt nr.

Warranty, spare parts and service

Warranty disclaimer

Faults and damage caused directly or

indirectly by incorrect operation, misuse,



installation or mains connection. Fire, ac-

cident, lightening, voltage variation or other

electrical interference, including defective

fuses or faults in mains installations are not

covered by the warranty.

Repairs performed by others than approved

service centres and any other faults and

damage that the manufacturer can sub-

stantiate are caused by reasons other than

manufacturing or material faults are not

covered by the warranty.

Please note that changes to the construc-

tion of the appliance or changes to the

component equipment of the appliance will

invalidate warranty and product liability, and

the appliance cannot be used lawfully.

Spare parts

When ordering spare parts, please state the

type, serial and product numbers of your

appliance. This information is given on the

rating plate . The rating plate contains

various technical information, including type

and serial numbers.

Fig. 8

10

GB

VLS 064 RF

VLS064RF

3.1

Position Item number Item name

0070

A

921001 Cover + wirring clamp

0087 0-6038175 Base plate fittings, complete

0127 0-7038027 Relay

0129 8-036038987 Compressor - NL7,3MF, Complete,

0637 0-5238579 Holder for relay

0899a 7090365 Phail,

0899b 7090366 Phail,

2169a 7095034 Thermostat XR50CX - unidad de refrigeración

2169b 7095035 Thermostat XR50CX - freezer

2180 0-52393820101 Fittings for phial

5000 3010049 Drain plug

5002 6000959 Foot with pin

5052 2041300 Fittings for condenser

5057 6010084 Condenser

5108 5000917680 Lid foamed without handle/hinges

5109 3020102-01 Gasket 201 l. 701x581mm white

5187 6530068

Filter drier

5378 5020540 Lid for fast freeze compartment

5401 1510028 Hinge S 58-00-13

5402 1510029 Hinge 40

5450 3010040-01 Top part for hinge cover

5451 3010032-01 Bottom part for hinge cover

5605 304090501 Handle with lock (push and turn)

5606 8090342-94 Inlay for handle,

5682 1510046 Key, set - 2pc.

5683 2040145 Catch for handle

5684 3010265-01 Cover for catch

5685 600098801 Lock with keys,(push and turn)

5738 7010138 Pilot lamp, green

5756 7020287-03 Thermometer, solar

5812 6520360 Starting device, 117U6016

5850 6520004 Starting condenser 117U5015

5926 3510032 Bottom grating

5928 3510040 Basket

5950 3010155-01 Plastic partition

5963

A

93010357 Eutectic element

5970 3010308-01 Motor screen

6553 7535361 Mains lead

Subject to changes without prior notice.

1-X06467104410103 Version :...

A

Date :............. 20-10-2014

A

pproved b

y

:....

11

GB

12

GB

13

GB

Disposal

Information for Users on Collection

and Disposal of Old Equipment and

used Batteries

These symbols on the products,

packaging, and/or accompanying

documents mean that used electri-

cal and electronic products and

batteries should not be mixed with

general household waste. For proper

treatment, recovery and recycling

of old products and used batteries,

please take them to applicable collec-

tion points, in accordance with your

national legislation and the Directives

2002/96/EC and 2006/66/EC.

By disposing of these products and

batteries correctly, you will help to

save valuable resources and prevent

any potential negative effects on

human health and the environment

which could otherwise arise from

inappropriate waste handling.

For more information about collec-

tion and recycling of old products and

batteries, please contact your local

municipality, your waste disposal

service or the point of sale where you

purchased the items.

Penalties may be applicable for incor-

rect disposal of this waste, in accord-

ance with national legislation.

For business users in the Euro-

pean Union.

If you wish to discard electrical and

electronic equipment, please contact

your dealer or supplier for further

information.

Information on Disposal in other

Countries outside the European

Union

These symbols are only valid in the

European Union. If you wish to dis-

card this product, please contact your

local authorities or dealer and ask for

the correct method of disposal.



This symbol might be used in combi-

nation with a chemical symbol. In this

case it complies with the requirement

set by the Directive for the chemical

involved.

14

GB

Information générale

Le VLS 064 RF est un réfrigérateur à vac-

cins glace bordée (entre +2 et +8 ° C) équi-

pé panier. Il a un compartiment pour le stoc-

kage du vaccin et un compartiment pour la

congélation et le stockage des packs d’eau.



Le modèle VLS 064 RF est équipé d’un

compresseur puissant pouvant fonctionner

sur un voltage de 22 % inférieur à la tension

nominale. Voir la plaque signalétique. Si les

variations de tension débordent cette plage,

l’emploi d’un stabilisateur automatique de

tension est recommandé.



Voir la plaque signalétique placée à l’arrière

de l’appareil.

Déballage

1. Déballer l’appareil et s’assurer qu’il n’a

subi aucun dommage. Si un dommage

est observé, contacter votre responsable

technique.

   

tension et quelle fréquence conviennent

3. Ouvrir et sortir tout le matériel emballé à

l’intérieur.

 Pour votre propre sécurité, per-

sonne ne doit tenter de soulever

l’appareil sans aide.

Table des matières

Information générale...................................2

Alimentation électrique ...............................2

Caractéristiques techniques .......................2

Déballage ...................................................2

Faire connaissance avec son réfrigérateur 3

Installation ..................................................4

Raccordement électrique............................5

Mise en service et fonctions .......................6

Refroidissement de l’appareil .....................6

Chargement de l’appareil ...........................7

Entretien et nettoyage ................................8

 ............................9

Garantie, pièces de rechange et service ..10

Schéma de principe ..................................13

Mise au rebut ............................................14

Nous nous réservons le droit d’apporter



2

FR

Faire connaissance avec son réfrigérateur

Poignée

Couvercle

Bande d’étanchéité

couvercle interne

Le stockage

de vaccins

Compartiment

congélation

Compartiment du

compresseur avec

la grille de ventilation



de la température

Panier

Grille de fond



3

FR

Il doit y avoir au moins 30 mm d’espace

entre la base de l’appareil et le sol.

Les ouvertures de ventilation sur l’appareil

ou sur la structure incorporée doivent être

maintenues libres de toute obstruction.

-

lation doit être libre. 



Emplacement

L’appareil doit être placé dans une pièce

bien ventilée, à l’abri du soleil et loin des

autres sources de chaleur.

Lors de la mise en place de l’appareil, s’as-

surer que le sol est bien plan. Pour plus



Installation



100 mm

50 mm

800 mm

4

FR

Préparation



votre support. Si ce n’est pas le cas, de-







Cordon élec-

trique



230 V 115 V

Marron Blanc Sous tension

Bleu Noir Neutre

Vert/Jaune Vert Terre



allumer l’interrupteur de l’appareil.



en route, sinon, contacter votre respon-

sable technique.

La lampe témoin verte placée dans le pan-

neau de contrôle s’allume lorsque l’appareil

est connecté à l’alimentation électrique.

Stabilisateur de tension recommandé:

Stabilisateur de tension Sollatek du type

SVS04-22 ou équivalent.



Le câblage et les raccordements électriques

des systèmes d’alimenta¬tion électrique

doivent respecter les normes électriques

(locales et nationales) en vigueur. Consul-

tez ces normes avant toute installation de

l’appareil.

Ce dispositif est conforme aux directives de

l’U.E. le concernant, y compris la Directive

2006/95/CEE sur la Basse Tension et la

Directive 2004/108/CE sur la Compatibilité

Electromagnétique.

La prise de courant doit rester facilement

-

pareil dans une prise secteur en 220-240V

50Hz & 208-230V 60Hz réglementairement

reliée à la terre. La prise doit être protégée

par un fusible/disjoncteur supportant de 10A

- 13A fusible.

Sur les appareils destinés aux pays non

-



la plaque signalétique concordent bien avec

ceux offerts par le secteur du pays oncerné.

Les informations concernant la tension

et la puissance absorbée / courant sont



Si un changement de cordon d’alimentation

électrique s’impose, cette opération est

réservéeà un spécialiste.

La plaque signalétique fournit diverses

informations techniques ainsi que les numé-

ros de type et de série.

N’utilisez en aucun cas des rallonges de

câble.

5

FR

Mise en service et fonctions

Fig. 4

2. Solaire thermomètre

1. Voyant vert



L’appareil est muni d’un thermostat

électronique pour le contrôle de la

température dans le compartiment à

vaccins. Le thermostat est réglé au départ

d’usine.

1. La diode verte est allumée lorsque

l’appareil est connecté à l’alimentation

électrique.

2. Solaire thermomètre.

Procédure de mise en route



courant. La diode verte doit s’allumer

(Fig. 4) pour indiquer que l’appareil est

en fonction. Le thermostat électronique

procède à son propre test, 20 secondes

avant la mise en route du compresseur.

Contrôle de la température



température intérieure deux fois par jour à

l’aide d’un thermomètre précis. Selon les



température intérieure doit être contrôlée

régulièrement.

Refroidissement de l’appareil

Avant que les vaccins soient chargés dans

l’appareil, la contre-paroi réfrigérante doit

être gelée. Pour s’assurer que la contre-

paroi réfrigérante est bien gelée, procéder

comme suit :

1. Placer un thermomètre dans le panier

supérieur.

2. Laisser le réfrigérateur fonctionner

pendant 48 heures au moins avant de

charger les vaccins.

3. Contrôler la température dans le

compartiment de vaccins

(celle-ci doit se situer entre +2 et +8 °C).

La température dans le compartiment à

vaccins doit être constamment contrôlée sur

le thermomètre et doit se situer dans une

fourchette de +2 à +8 °C. La précision du

thermostat permet un contrôle constant de

la température pendant le refroidissement.

°C

+4

6

FR

Страница загружается ...

Vestfrost VLS 064 RF Instructions For Use Manual

Vestfrost VLS 064 RF Instructions For Use Manual

на других языках

Похожие модели бренда

Модели других брендов