oven. Always operate your
oven in the places, where small
children cannot reach.
When your oven is hot, do not
touch the oven with wet cloth
and by hand. When you finish
your work with the oven, firstly
unplug it and do not move it
before cooling.
Important safety measures
Following basic safety
measures should be followed
continuously while the
electrical devices are operated/
We recommend you to operate
your oven as empty and with
open glass for 10 minutes in
the first operation. Thus , first
steam and odor , which is
constituted by paint and
manufacturing oil wastes
against the heat, will remove
from the oven and it will not
become permeated with your
food/
Operation voltage of your oven
is AC 220 – 240 V.
Operate your oven in the
grounding plug with 16 A fuse.
Put your oven in a smooth and
fireproof ground. As glass and
metal parts will get heated
while your oven is operating,
do not touch these parts with
bare hands.
Important operating instructions
Switch on to power supply
Set your cooking heat by using
thermo stat setting button.
If you use double tray, place
your meal into special trays of
your oven and push them.
When you consider that top
part of meal in the top tray,
cooks, change places of top
tray with the bottom tray.
When top of the tray , which
you put from bottom to top,
your meal is ready for dining
table.
Take your cooked meal for rest
inside your oven for 5 minutes
and then serve it.
Cleaning and maintenance
Firstly unplug it. Pay attention
that your oven is not hot. Do
not use flammable and
abrasive substances such as
acid, thinner and gasoline for
cleaning.
Do not use powder detergent.
Wipe interior and exterior
surfaces and accessories with
soapy or liquid detergent and
soft a bit damp cloth.
While cleaning your oven, do
not wash it in the tap. Avoid
the water contact certainly.
Operation of the oven
When the 3 rd position in the
control button table is brought
to
«=», bottom and top
resistances operate together.
You can set thermostat button
into any temperature in the
range of 50°C - 320°C. Heat
the device for 10 minutes
before start. Do not operate
your oven before putting the
thermostat into use.