Yamaha YSP-5600 Инструкция по применению

G

Digital Sound Projector

Projecteur Numérique de Son

Quick Reference Guide

Guide de référence rapide

Kurzanleitung

Snabbreferensguide

Guida rapida

Guía de referencia rápida

Snelgids

Краткое руководство

SWK-W16

For more detailed information, refer to the Owner’s Manual on the

CD-ROM.

Caution: Do not attempt to play this CD-ROM in an audio player.

English

Pour de plus amples informations, reportez-vous au Mode d’emploi

qui se trouve sur le CD-ROM.

Attention : N’essayez pas de lire ce CD-ROM dans un lecteur

audio.

Français

Ausführlichere Informationen finden Sie in der Bedienungsanleitung

auf der CD-ROM.

Achtung: Versuchen Sie nicht, diese CD-ROM in einem

CD-Player abzuspielen.

Deutsch

För detaljerad information, se bruksanvisningen på CD-ROM-skivan.

Observera: Försök ej att spela upp denna CD-ROM-skiva på en

cd-ljudspelare.

Svenska

Per maggiori informazioni dettagliate fare riferimento al Manuale di

istruzioni sul CD-ROM.

Attenzione: non riprodurre il CD-ROM in un lettore audio.

Italiano

Para obtener más información, consulte el Manual de instrucciones

que encontrará en el CD-ROM.

Precaución: No intente reproducir este CD-ROM en un

reproductor de audio.

Español

Raadpleeg de gebruiksaanwijzing op de CD-ROM voor meer

gedetailleerde informatie.

Let op: probeer deze CD-ROM niet af te spelen in een

audiospeler.

Nederlands

Более подробная информация приведена в Инструкции по

эксплуатации на диске CD-ROM.

Предостережение: Не пытайтесь воспроизвести этот

CD-ROM на аудиоплеере.

Русский

2 En

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for

future reference.

2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight,

heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following

minimum clearances.

Top: 5 cm, Rear: 5 cm, Sides: 5 cm

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming

sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit

in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal

injury.

5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be

exposed to liquid dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal

injury.

– Containers with liquid in them, as they may fall and liquid may cause electrical shock to the

user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat

radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or

personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit with a higher voltage than

specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will

not be held responsible for any damage resulting from use of this unit with a voltage other than

specified.

13 Be sure to connect to an appropriate outlet with a protective grounding connection. Improper

grounding can result in electrical shock, damage to the device(s), or even fire.

14 To prevent damage by lightning, keep the power cable and outdoor antennas disconnected from a

wall outlet or this unit during a lightning storm.

15 Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any

service is needed. The cabinet should never be opened for any reasons.

16 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power

plug from the wall outlet.

17 Be sure to refer to the “Troubleshooting” section of the Owner’s Manual on the CD-ROM for

common operating errors before concluding that this unit is faulty.

18 Before moving this unit, press A to set it to standby mode and disconnect the AC power plug from

the wall outlet.

19 Condensation will form when the surrounding temperature changes suddenly. Disconnect the

power cable from the outlet, then leave this unit alone.

20 When using this unit for a long time, this unit may become warm. Turn the power off, then leave

this unit alone for cooling.

21 Install this unit near the AC outlet and where the AC power plug can be reached easily.

22 The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. When you

dispose of batteries, follow your regional regulations.

23 Excessive sound pressure from earphones and headphones can cause hearing loss.

24 Keep the product out of reach of children to avoid them swallowing small parts.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

This unit is not disconnected from the AC power source as long as it is connected to the wall

outlet, even if this unit itself is turned off by A. This state is called the standby mode. In this

state, this unit is designed to consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE.

Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or

defibrillator implant.

Radio waves may affect electro-medical devices.

Do not use this unit near medical devices or inside medical facilities.

The name plate for SWK-W16 is located on the bottom of the unit.

English

En 3

■ Notes on remote controls and batteries

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following conditions:

– places of high humidity, such as near a bath

– places of high temperatures, such as near a heater or stove

– places of extremely low temperatures

– dusty places

• Insert the battery according to the polarity markings (+ and -).

• Change all batteries if you notice the following conditions:

– the operation range of the remote control narrows

• If the batteries run out, immediately remove them from the remote control to prevent an explosion or

acid leak.

• If you find leaking batteries, discard the batteries immediately, taking care not to touch the leaked

material. If the leaked material comes into contact with your skin or gets into your eyes or mouth,

rinse it away immediately and consult a doctor. Clean the battery compartment thoroughly before

installing new batteries.

• Do not use old batteries together with new ones. This may shorten the life of the new batteries or

cause old batteries to leak.

• Do not use different types of batteries (such as alkaline and manganese batteries) together. Danger of

explosion may happen if batteries are incorrectly replaced. Specification of batteries may be different

even though they look the same.

• Before inserting new batteries, wipe the compartment clean.

• Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor

immediately.

• When not planning to use the remote control for long periods of time, remove the batteries from the

remote control.

• Do not charge or disassemble the supplied batteries.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it

should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions

described below.

The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is

hazardous if engaged in a live socket outlet.

■ Special Instructions for U.K. Model

Information for Users on Collection and Disposal of Old

Equipment and Used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that

used electrical and electronic products and batteries should not be mixed with general

household waste.

For proper treatment, recovery and recycling of old products and used batteries, please

take them to applicable collection points, in accordance with your national legislation

and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable

resources and prevent any potential negative effects on human health and the

environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries,

please contact your local municipality, your waste disposal service or the point of sale

where you purchased the items.

[Information on Disposal in other Countries outside the European

Union]

These symbols are only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it

complies with the requirement set by the Directive for the chemical involved.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE

FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the

letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal of the three pin plug.

To view the Owner’s Manual, click on “English” in the screen displayed automatically when you

insert the CD-ROM into your PC, or click on the model name if the screen to select models is

displayed, and then click on “English” in the next screen. Then, follow the onscreen instructions.

If the screen is not displayed automatically, open the “index.html” in the CD-ROM.

The Owner’s Manual contained in the CD-ROM can be downloaded from the following website:

URL : http://download.yamaha.com/

4 En Supplied accessories

Before connecting, make sure you have received all of the following items.

* The shape of the power cable plug varies depending on where the unit was

purchased.

Before installing batteries or using the remote control, be sure to read battery and

remote control precautions in this booklet.

About this Quick Reference Guide

The Quick Reference Guide provides instructions for connecting a TV and BD/DVD

player to the unit, applying settings, and playing content. For more information on

operations, refer to the Owner’s Manual in the supplied CD-ROM.

Read the safety instructions described in this booklet before using the unit. For

instructions on how to operate or set the external devices, refer to documentation

supplied with each device.

• indicates supplementary explanations for better use.

• indicates precautions for use of the unit and its feature limitations.

Supplied accessories

Remote control Batteries

(AAA, R03, UM-4) (x2)

Optical cable (1.5 m)

Power cable (2 m)* IntelliBeam microphone

(6 m)

Cardboard microphone

stand

Stands (x2) Screws (For the stands; x2) Subwoofer cable (3 m)

System control cable

(3 m)

• Owner’s Manual CD-ROM

• Quick Reference Guide (this booklet)

• MusicCast Setup Guide

Devices and cables required for connection

• TV • BD/DVD player • HDMI cables (x2)

Preparing remote control

Installing the batteries

Operation range

Battery × 2

(AAA, R03, UM-4)

Press down on the arrow

and slide the cover in the

direction in which it

points.

Slide the cover back to close it.

Within 6 m

a Installation En 5

This unit reflects sound beams off of walls and a ceiling to create the surround sound effect. The position of this unit in relation to the listening position, walls, and a ceiling is important

to achieving the desired surround sound effects. Refer to pages 6 to 7 when installing the unit. When installing this unit on a rack behind which there is limited space, for example, it

may be easier to connect external devices to this unit first. This will depend upon the installation location. See page 8 for information regarding the connection of external devices.

a Installation

Notes

• Be sure to install this unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

• There is a built-in antenna on the top of the unit. Do not install it on a metal rack, and do not stack metal items on top of the unit.

• The unit’s speakers are not magnetically shielded. Do not install hard disk drives or similar devices near the unit.

• Do not stack the unit directly on top of other playback devices, or vice versa. Heat and vibrations may result in damage or malfunction.

Recommended place for installation

1

Height channel audio is output in a diagonal

direction upward and forward from the unit. As

height channel sound beams are reflected off the

ceiling, sound can be heard from above.

2

Depending upon the rack, table-top stand, or floor

stand used, the stands may not be necessary.

• Install the unit in the center of the left and right

walls.

• This unit can be mounted on a wall. See page 17

in the Owner’s Manual.

• The listening position (such as sofa, etc.) should be

located at the front of the unit.

• The distance between the listening position and the

unit should be more than 1.8 m.

• Set the listening position as far from the back wall as

possible (the optimal listening position is halfway

between the unit and the back wall, or slightly closer

to the back wall).

• To achieve desired surround sound effects, be

sure that obstacles such as furniture may not

obstruct the path of sound beams (p. 6).

• Be sure that the unit installed with at least 5 cm

of empty space above and below it.

• Leaving as much space as possible in a

diagonal direction in front of, and above, the

unit when installing it.

1

• Attach the supplied stands to the unit if it will

be installed on a rack

2

(p. 7).

1 2 3 4

6 En a Installation

This unit outputs sound beam as shown in the illustrations below. Install this unit where there are no obstacles such as furniture obstructing the path of sound beams. Otherwise, the

desired surround sound effects may not be achieved.

If the unit is installed so that it is parallel to a wall, install it as close to the exact center of the wall as possible.

If the unit is installed in a corner of a room, position it at a 40–50° angle to the adjacent walls.

• See pages 14 to 16 in the Owner’s Manual for additional installation examples.

Example for installing the unit

Objects,

such as

furniture

Viewed from above Viewed from the side

Sound beams

are reflected off

the ceiling

Sound beam output varies depending upon the 3D surround/Surround setting (pages 38

and 39 in the Owner’s Manual) and the channel output setting (page 73 in the Owner’s

Manual). The illustration above shows the path of sound beams when 3D surround is

enabled and “Front” in the Channel Out setting is set to “Beam”.

Parallel installation

40° to 50°

Objects, such as

furniture

Viewed from above Viewed from the side

The illustrations above show the path of sound beams when 3D surround is enabled

(page 38 in the Owner’s Manual) and “Front” in the Channel Out setting is set to “Stereo”.

(page 73 in the Owner’s Manual).

Sound beams

are reflected off

the ceiling

Coner installation

1 2 3 4

a Installation En 7

This unit creates surround sound by reflecting projected sound beams off the walls and

the ceiling of your listening room. The surround sound effects produced by this unit

may not be sufficient when this unit is installed in the following locations.

• Rooms with walls inadequate for reflecting sound beams

• Rooms with acoustically absorbent walls and ceiling

• Rooms with measurements outside the following range:

W (3 to 7 m) × H (2 to 3.5 m) × D (3 to 7 m)

• Rooms where objects such as furniture are likely to obstruct the path of sound beams

• Rooms with less than 1.8 m from the listening position to this unit

• Rooms where the listening position is close to the walls

• Rooms where the listening position is not in front of this unit

• Rooms with a complex shape, such as a slanted ceiling (ceiling lights do not obstruct

sound beams)

The My Surround function creates rich surround sound effects in rooms with less than

optimal surround sound conditions. See “Channel Out” (page 73 in the Owner’s

Manual) for more information.

• This unit’s AUTO SETUP (IntelliBeam) can be used to automatically adjust sound beams to achieve the

optimal surround playback environment according to the listening room setup (p. 12).

Install the stands (supplied) on the bottom of the unit. Align and insert the protrusion on

the stands into the holes on the rear panel of the unit as shown in the illustration, and

then tighten the screws (supplied) to lock the stands in place. The stands need not be

installed when the unit is mounted on a wall using the optional Wall Mount Bracket

SPM-K30.

Unrecommended listening environments

Enjoying surround effects regardless of conditions (My

Surround)

Installing the stands

Stand (supplied)

Screws (supplied) Stand (supplied)

1 2 3 4

8 En b Connections

Connecting a TV and BD/DVD player

For the cable connection, follow the procedure below. See pages 23 to 24 in the Owner’s Manual when connecting other playback devices such as a game console.

b Connections

SYSTEM

CONNCETOR

RL

AUX1

AUX2 OPTICAL IR-IN

IN 1

(HDCP2.2)

IN 2

IN 3

IN 4

OUT

(ARC)

HDMI

IR-OUT

UPDATE ONLY

RS-232C

NETWORK

SUBWOOFER

OUT

AC IN

TV

OUT

(ARC)

TV

IN 1

(HDCP2.2)

HDMI INPUT

123

OPTICAL

OUTPUT

HDMI

OUTPUT

BD/DVD player

TV

1. Remove the cap

2. Check the direction of

the plug

Video signals

Audio signals

12

Use an optical cable when

connecting a TV that does not

support Audio Return Channel.

1

HDMI cable (optional)

The digital audio/video signals from the BD/DVD player

are input to this unit.

• This unit supports HDCP version 2.2, a copy protection technology. When

using an HDCP 2.2-compliant playback device, such as a set-top box,

connect it to the unit via the HDMI IN 1 jack.

2

HDMI cable (optional)

Digital video from the BD/DVD player is displayed on the

TV.

• Connect the unit to the HDMI IN jack (one compatible with HDCP 2.2) on

an HDCP 2.2-compliant TV to enjoy playback of 4K video.

Audio Return Channel (ARC) supported TV

• Connect an HDMI cable to the audio return channel supported jack (the jack with

“ARC” indicated) on TV.

• Enable the HDMI control function of this unit to activate the Audio Return

Channel (ARC). See page 77 in the Owner’s Manual.

What is Audio Return Channel (ARC)?

• In order for the unit to play audio from a TV, the TV must usually be connected to

the unit via an audio cable as well as an HDMI cable. If, however, the TV

supports Audio Return Channel (ARC), TV audio signals can be input to the unit

via the HDMI cable that outputs video signals from the unit to the TV.

For a wired network connection, connect one end of the network

cable to the NETWORK jack on the rear panel of the unit and the

other end to a router. For details, see page 52 in the Owner’s

Manual.

1 2 3 4

b Connections En 9

Connecting a subwoofer

A subwoofer can be connected to the unit for use with the unit. There are two ways to

connect a subwoofer to the unit: use a third-party RCA monaural cable, or use the

wireless subwoofer kit SWK-W16 to connect via a wireless connection.

• See page 25 in the Owner’s Manual for more information.

Use a third-party RCA monaural cable to connect the subwoofer to the unit via the

monaural input jack on the subwoofer and the SUBWOOFER OUT jack on the unit.

If a Yamaha subwoofer is connected via the SYSTEM CONNECTOR jack, it turns on

and off when the unit is turned on and off.

• When the unit is connected to the subwoofer via the cable, set the subwoofer output to “Wired” in the setup

menu (page 74 in the Owner’s Manual).

The wireless subwoofer kit SWK-W16 enables wireless connection of a subwoofer to the

unit. Install the SWK-W16 on or near the subwoofer.

Follow the procedure below to connect the SWK-W16 to the subwoofer.

1

Connect subwoofer cable to the SUBWOOFER OUT jack on the

SWK-W16 and the subwoofer’s input jack.

If a Yamaha subwoofer is connected via the SYSTEM CONNECTOR jack, it

turns on and off when the unit is turned on and off.

2

Plug the power cables for the subwoofer and the SWK-W16 into an

AC wall outlet.

When the unit is turned on, a wireless connection between the unit and

SWK-W16 will be established. The status indicator glows green once the

wireless connection is established.

• See “Troubleshooting” (pages 93 and 99 in the Owner’s Manual) if the indicator on the wireless subwoofer

kit does not glow green.

Connecting a subwoofer via cable

Using the wireless subwoofer kit SWK-W16

AUX2 TV OPTICAL

IN 1

(HDCP2.2)

IN 2

IN 3

IN 4

OUT

(ARC)

HDMI

IR-IN IR-OUT

UPDATE ONLY

RS-232C

NETWORK

RL

AUX1

SYSTEM

CONNCETOR

SUBWOOFER

OUT

SYSTEM

CONNECTOR

SUBWOOFER

OUT

INPUT SYSTEM

CONNECTOR

The unit (rear)

Subwoofer

SWK-W16

SUBWOOFER

OUT

SYSTEM

CONNECTOR

2

INPUT

SYSTEM

CONNECTOR

1

To an AC wall outlet

Subwoofer cable

(supplied)

To an AC wall outlet

System control cable

(supplied)

SWK-W16

Subwoofer

Status indicator

Rear side

1 2 3 4

10 En b Connections

Connecting the power cable

After all the connections are complete, plug in the power cable.

Turning on the unit

1

Press the z key.

When the unit is turned on for the first time after purchase,

the screen below will be displayed on the TV. (“ViewScreen”

is shown in the front panel display.)

• When the screen is not displayed, use the input button on the TV’s remote control

to switch input so that video input from this unit is displayed. When this unit is

connected to the TV as shown on page 8, select “HDMI 1”.

• The language used for menu display (OSD Language) can be selected from the

screen shown above. Use the W/X key to select the language, and follow the

on-screen instructions. The OSD language can also be changed from the setup

menu at any time. Press and hold the SETUP ( ) key until the “OSD Language”

menu is displayed on the TV, and use the S/T key to select the language. Press

the SETUP ( ) key to exit the setup menu.

While this screen is displayed, an iOS device (such as an iPhone)

can be used to easily connect the unit to a wireless network. Follow

the procedure below.

If you will not use an iOS device to connect to a wireless network,

press the RETURN ( ) key and proceed to “c Auto setup for

appropriate surround effects (IntelliBeam)”.

• This screen will not be displayed if the unit is connected to a router via its

NETWORK jack (wired connection).

• See page 51 in the Owner’s Manual for wireless network connection methods

other than “Share Wi-Fi Settings”, or for more information regarding wired and

wireless networks.

1

Press the ENTER key.

The screen below is displayed.

• You need iOS device with iOS 7.1 or later.

• Before proceeding, confirm that your iOS device is connected to a wireless

router (access point).

SYSTEM

CONNCETOR

RL

AUX1

AUX2 TV OPTICAL

IN

4

OUT

(ARC)

HDMI

IR-IN

SUBWOOFER

OUT

AC IN

The unit (rear)

To an AC wall outlet

Share Wi-Fi Settings

You can share the wireless

(Wi-Fi) settings of the

network with Sound Projector

using a device with iOS7 or

later.

[ENTER]:Start

[RETURN]:Cancel

[ ]:OSD Language

Connecting the unit to a wireless network

Share Wi-Fi Settings

Make sure your iOS device is

connected to your Wi-Fi

network, and then open the

Wi-Fi settings screen of

your iOS device.

[ENTER]:Confirm

[RETURN]:Cancel

1 2 3 4

RETURN ( )

z

ENTER

SETUP ( )

b Connections En 11

2

Press the ENTER key.

3

Display the Wi-Fi setup screen on the iOS device

and select the unit from “SETUP A NEW AIRPLAY

SPEAKER...”.

4

Select the network (access point) of which you want

to share the settings with the unit.

• You can use this function to connect to a wireless network at any time by selecting

“Share Wi-Fi Settings (iOS)” from the setup menu. However, be aware that if a

different wireless network, or a Bluetooth device, has already been configured,

doing so will erase any previous settings.

iOS (an example of English version)

The name of the unit

Tap here to start setup

The network currently selected

The name of the unit

iOS (an example of English version)

1 2 3 4

ENTER

12 En c Auto setup for appropriate surround effects (IntelliBeam)

First use the “IntelliBeam” function to adjust each channel so that this unit provides the

optimal viewing and listening environment.

• The AUTO SETUP procedure may not be run successfully if this unit is installed in one of the rooms

described in “Unrecommended listening environments” (p. 7).

The My Surround function can be used to enjoy rich surround sound in these types of rooms as well. See

“Channel Out” (page 73 in the Owner’s Manual) for more information.

• Do not connect the IntelliBeam microphone to an extension cable as doing so may result in an inaccurate

sound optimization.

1

Place the IntelliBeam microphone at your normal listening position.

❑ Assembling the supplied cardboard microphone stand

• Use the supplied cardboard microphone stand or a tripod to place the IntelliBeam

microphone at the same height as your ears would be when you are seated.

• Position the IntelliBeam microphone so that it is parallel with the floor.

Make sure that there are no obstacles between the IntelliBeam microphone and the

walls in your listening room as these objects obstruct the path of sound beams.

However, any objects that are in contact with the walls will be regarded as a protruding

part of the walls.

c Auto setup for appropriate surround effects (IntelliBeam)

Installing the IntelliBeam microphone

12

3

5

4

Remove

Fit in

Run through

Place horizontally

Fit in

IntelliBeam microphone

Upper limit

Within 1 m

Center height of

this unit

Cardboard

microphone stand

Within 1 m

Listening position

1.8 m or more

Lower limit

Center line

IntelliBeam microphone

Cardboard microphone stand

1 2 3 4

c Auto setup for appropriate surround effects (IntelliBeam) En 13

• Test tones output during measurement are loud. Perform AUTO SETUP when no children are around and

there is no possibility of their entering the listening room, as their hearing may be impaired.

• If there are curtains in your listening room, we recommend following the procedure below.

1. Open the curtains to improve sound reflection.

2. Run “Beam optimize only” (page 33 in the Owner’s Manual).

3. Close the curtains.

4. Run “Sound optimize only” (page 33 in the Owner’s Manual).

• Make sure that your listening room is as quiet as possible. For accurate measurement, turn off air

conditioner or other devices that make noises.

1

Turn the unit and your TV on.

• When a subwoofer is connected to the unit, turn on the subwoofer, and set the volume and crossover

frequency as shown below.

2

Switch TV input to display video input from this unit (page 28 in the

Owner’s Manual).

3

Connect the IntelliBeam microphone to the INTELLIBEAM MIC jack

of the unit.

The screen below is displayed after connecting IntelliBeam microphone to the

unit.

“AUTO SETUP” in the “IntelliBeam” menu can automatically adjust the

following two settings.

“Beam optimize only” or “Sound optimize only” can be measured separately in

the setup menu (page 33 in the Owner’s Manual).

• Follow the instructions below and then leave the room. If you remain in the room, you may obstruct

the beam, or the microphone may pickup any sounds you make, possibly resulting in improper

measurement.

Using AUTO SETUP (IntelliBeam)

VOLUME

MIN MAX MIN

MAX

CROSSOVER

HIGH CUT

Set the volume to half Set the crossover frequency to maximum

Beam optimize only

This feature optimizes the beam angle so that the parameter best

matches your listening environment.

Sound optimize only

This feature optimizes sound quality for each channel by

measuring the acoustic characteristics of the listening

environment.

INTELLIBEAM MIC

IntelliBeam microphone

Cardboard microphone stand

AUTO SETUP

(PREPARATION & CHECK)

Please connect the MIC.

Please place the MIC at least

1.8m/6ft away from Sound Pro-

jector. The MIC should be set

at ear level when seated.

Measurement takes about 3min.

After [ENTER] is pressed,

please leave the room.

[ENTER]:Start [RETURN]:Cancel

1 2 3 4

14 En c Auto setup for appropriate surround effects (IntelliBeam)

4

Press the ENTER key to start the AUTO SETUP

procedure and then leave the room within 10

seconds.

If the AUTO SETUP procedure is complete, this unit rings

the chimes.

• The AUTO SETUP procedure takes about 3 minutes.

• To cancel the AUTO SETUP procedure after it is started, or if you do not

want to apply the results, press the RETURN ( ) key.

• If an error occurs, an error buzzer sounds and an error message is

displayed. For details on error messages, see page 34 in the Owner’s

Manual.

5

Press the ENTER key.

The measurement results are applied and saved in the unit.

• You can save several measurement results by pressing

the SYSTEM MEMORY 1, 2, or 3 key.

When the SYSTEM MEMORY 1 key is pressed, “M1

Saving” is displayed, and settings are saved.

• If ambient noise is picked up after measurement begins,

an error message is displayed in the “AUTO SETUP

COMPLETE” screen prompting you to begin

measurement again. Press the ENTER key to exit the

error message screen, and begin measurement again.

• See page 45 in the Owner’s Manual for more information on the system

memory function.

6

Remove the IntelliBeam microphone.

The “AUTO SETUP COMPLETE” screen closes.

The IntelliBeam microphone is sensitive to heat, so should

not be placed anywhere where it could be exposed to direct

sunlight or high temperatures (such as on top of AV

equipment).

SHOW RESULT

MEASUREMENT COMPLETE.

ENVIRONMENT CHECK:Success

FRONT :Beam

SURROUND :Beam

SUBWOOFER:Wired

[ENTER]:Save set-up.

[RETURN]:Do not save set-up.

AUTO SETUP START

Will begin in 10 sec.

Please leave the room.

----------

[RETURN]:Cancel

The screen changes

automatically as measurement

progresses.

AUTO SETUP COMPLETE

Please remove the MIC

from Sound Projector

and the listening position.

Press [SYSTEM MEMORY] key

to save set-up in the memory.

INTELLIBEAM MIC

1 2 3 4

RETURN ( )

SYSTEM

MEMORY

ENTER

d Playback En 15

Enjoying TV

1

Select the desired TV channel.

2

Press the TV key.

• When audio is output from the TV speaker, set TV’s audio output to an option

(output to the unit) other than TV. Refor to documentation supplied with TV for

more information.

• HDMI control function

You can use the TV remote control to operate this unit if your TV supports the

HDMI control function. See page 35 in the Owner’s Manual.

Playing a DVD or BD

The following explains the playback procedure when this unit is

connected to the TV and BD/DVD player as shown in “Connecting

a TV and BD/DVD player” (p. 8).

1

Turn on the TV and BD/DVD player connected to this

unit.

2

Press the HDMI key to select the BD/DVD player as

the input source.

3

Use the TV’s remote control to switch the TV’s input

to HDMI 1.

4

Play back a DVD or BD.

5

Press the VOL (+/-) key to adjust the volume.

6

Press the 3D SURROUND, SURROUND, STEREO, or

TARGET key according to your preferences.

See page 38 in the Owner’s Manual for details.

When this unit does not play back, check the following

• The unit and BD/DVD player are connected correctly.

• The audio output settings of the BD/DVD player is set to digital sound output

(bitstream).

• The TV’s input is switched to this unit.

d Playback

HDMI1

Input source name

TV

HDMI1

VOL (+/-)

3D SURROUND

SURROUND

STEREO

TARGET

1 2 3 4

16 En d Playback

Playback with 3D surround sound

In addition to 5-channel sound beams used for surround sound

playback in the horizontal direction, surround sound can be heard

from above by directing two sound beams (from height channels)

upward and reflecting them off the ceiling. Compared to surround

sound playback in only the horizontal direction, this gives the

sound field (spatial expression with sounds) a greater sense of

immersion and reality.

1

Press the 3D SURROUND key to switch to 3D

surround mode.

“3D SUR.” is shown in the front panel display.

Playback with surround sound

5-channel sound beams create a sound field for surround sound

playback without using height channel sound beams.

1

Press the SURROUND key to switch to surround

mode.

“SURROUND” is shown in the front panel display.

Sound beams in the horizontal direction

Sound beams output from height channels

Channels created from the front and rear sound

beams

3D SUR.

Sound beams

Channels created from the front and rear sound

beams

SURROUND

1 2 3 4

3D SURROUND

SURROUND

d Playback En 17

Enjoying three-dimensional surround

sound (CINEMA DSP 3D/CINEMA DSP)

Select the desired CINEMA DSP program according to the audio

source and your preferences. Yamaha’s exclusive sound field

reproduction technology (CINEMA DSP 3D/CINEMA DSP) easily

reproduces realistic sound fields comparable to those found in

movie theaters and concert halls, allowing users to enjoy a natural

and three-dimensional listening environment.

Sound fields are reproduced using CINEMA DSP 3D for 3D

surround sound playback, and CINEMA DSP for surround sound

playback. The same programs can be selected for both CINEMA

DSP 3D and CINEMA DSP.

1

Press the 3D SURROUND or SURROUND key to

enable 3D surround or surround playback mode.

2

Press the CINEMA DSP (MOVIE, MUSIC, or

ENTERTAINMENT) key repeatedly to select the

desired program.

The CINEMA DSP program name is shown in the front

panel display.

• Press the OFF key to disable CINEMA DSP. Audio content is played in 3D

surround mode or surround mode.

• Refer to page 39 in the Owner’s Manual for more information.

MusicCast CONTROLLER

The free dedicated app for mobile devices, MusicCast

CONTROLLER, allows you to listen to music stored on mobile

devices such smartphones, or on servers, or to listen to Internet

radio stations and many kinds of major streaming services.

This app also allows you to distribute content to other

MusicCast-enabled devices for synchronized playback.

See the “MusicCast Setup Guide” for details.

Search for “MusicCast CONTROLLER” on the App Store or Google

Play.

HOME THEATER CONTROLLER (WLAN)

The free dedicated app for mobile devices, HOME THEATER

CONTROLLER (WLAN), allows you to easily operate the unit,

performing such tasks as configuring sound beams on a visual

screen, selecting an input source, and adjusting the volume on a

mobile device.

Search for “HOME THEATER CONTROLLER (WLAN)” on the App

Store or Google Play.

The unit is equipped with a number of other functions not

described in this booklet. See the Owner’s Manual for details.

1 2 3 4

CINEMA DSP

3D SURROUND

SURROUND

2 Fr

1 Pour utiliser l’appareil au mieux de ses possibilités, lisez attentivement ce mode d’emploi.

Conservez-le soigneusement pour référence.

2 Installez cet ensemble audio dans un endroit bien aéré, frais, sec et propre - veillez à ce qu’il soit à

l’abri de la lumière directe du soleil, des sources de chaleur, des vibrations, des poussières, de

l’humidité et/ou du froid. Pour une ventilation correcte, ménagez l’espace minimum suivant.

Au-dessus : 5 cm, À l’arrière : 5 cm, Sur les côtés : 5 cm

3 Placez l’appareil loin des équipements, moteurs et transformateurs électriques, pour éviter les

ronflements parasites.

4 N’exposez pas l’appareil à des variations brutales de température, ne le placez pas dans un

environnement très humide (par exemple dans une pièce contenant un humidificateur) car cela peut

entraîner la condensation d’humidité à l’intérieur de l’appareil qui elle-même peut être responsable

de décharge électrique, d’incendie, de dommage à l’appareil ou de blessure corporelle.

5 Evitez d’installer l’appareil dans un endroit où des objets peuvent tomber, ainsi que là où l’appareil

pourrait être exposé à des éclaboussures ou des gouttes d’eau. Sur le dessus de l’appareil, ne placez

pas :

– d’autres appareils qui peuvent endommager la surface de l’appareil ou provoquer sa

décoloration.

– des objets se consumant (par exemple, une bougie) qui peuvent être responsables d’incendie, de

dommage à l’appareil ou de blessure corporelle.

– des récipients contenant des liquides qui peuvent être à l’origine de décharge électrique ou de

dommage à l’appareil.

6 Ne couvrez pas l’appareil d’un journal, d’une nappe, d’un rideau, etc. car cela empêcherait

l’évacuation de la chaleur. Toute augmentation de la température intérieure de l’appareil peut être

responsable d’incendie, de dommage à l’appareil ou de blessure corporelle.

7 Ne branchez pas la fiche du câble d’alimentation de l’appareil sur une prise secteur aussi longtemps

que tous les raccordements n’ont pas été effectués.

8 Ne pas faire fonctionner l’appareil à l’envers. Il risquerait de chauffer et d’être endommagé.

9 N’exercez aucune force excessive sur les commutateurs, les boutons et les cordons.

10 Pour débrancher la fiche du cordon d’alimentation au niveau de la prise secteur, saisissez la fiche et

ne tirez pas sur le cordon.

11 Ne nettoyez pas l’appareil au moyen d’un solvant chimique, ce qui pourrait endommager la

finition. Utilisez un chiffon sec et propre.

12 N’alimentez l’appareil qu’à partir de la tension prescrite. Alimenter l’appareil sous une tension

plus élevée est dangereux et peut être responsable d’incendie, de dommage à l’appareil ou de

blessure corporelle. Yamaha ne saurait être tenue responsable des dommages résultant de

l’alimentation de l’appareil sous une tension autre que celle prescrite.

13 Veillez à brancher l'instrument sur une prise appropriée raccordée à la terre. Toute installation non

correctement mise à la terre risque d'entraîner un choc électrique, l'endommagement de l'appareil

ou même un incendie.

14 Pour empêcher tout dommage causé par les éclairs, déconnectez le câble d’alimentation et toute

antenne extérieure de la prise murale pendant un orage.

15 Ne tentez pas de modifier ni de réparer l’appareil. Consultez le service Yamaha compétent pour

toute réparation qui serait requise. Le coffret de l’appareil ne doit jamais être ouvert, quelle que soit

la raison.

16 Si vous envisagez de ne pas vous servir de l’appareil pendant une longue période (par exemple,

pendant les vacances), débranchez la fiche du câble d’alimentation au niveau de la prise secteur.

17 Veuillez vous reporter à la section « Guide de dépannage » du mode d’emploi sur le CD-ROM

concernant les erreurs de fonctionnement courantes avant d’en conclure que l’appareil est

défectueux.

18 Avant de déplacer l’appareil, appuyez sur A pour placer l’appareil en veille puis débranchez la

fiche du câble d’alimentation au niveau de la prise secteur.

19 La condensation se forme lorsque la température ambiante change brusquement. En ce cas,

débranchez la fiche du câble d’alimentation et laissez l’appareil reposer.

20 La température de l’appareil peut augmenter en raison d’une utilisation prolongée. En ce cas,

coupez l’alimentation de l’appareil et laissez-le au repos pour qu’il refroidisse.

21 Installez cet appareil à proximité de la prise secteur et à un emplacement où la fiche du câble

d’alimentation est facilement accessible.

22 Les piles ne doivent pas être exposées à une chaleur extrême, par exemple au soleil, à une flamme,

etc. Lors de la mise au rebut des piles, suivez vos réglementations locales.

23 Tenez ce produit hors de la portée des enfants afin d’éviter qu’ils n’avalent les petites pièces.

24 Une pression excessive du son par les écouteurs et le casque d’écoute peut entraîner la perte de

l’ouïe.

ATTENTION : VEUILLEZ LIRE CE QUI SUIT AVANT D’UTILISER L’APPAREIL.

Cet appareil n’est pas déconnecté du secteur tant qu’il reste branché à la prise de courant, même

si l’appareil en soi est éteint par la touche A. Il se trouve alors « en veille ». En mode veille,

l’appareil consomme une très faible quantité de courant.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE ÉLECTRIQUE,

N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ.

Ne pas utiliser cet appareil à moins de 22 cm de personnes ayant un stimulateur cardiaque ou un

défibrillateur.

Les ondes radio peuvent avoir une incidence sur les équipements électroniques médicaux.

N’utilisez pas cet appareil à proximité d’équipements médicaux ou à l’intérieur d’institutions

médicales.

La plaque signalétique pour le SWK-W16 se trouve au bas de l’appareil.

Français

Fr 3

■ Remarques à propos des télécommandes et piles

• Ne renversez aucun liquide sur le boîtier de télécommande.

• Ne laissez pas tomber le boîtier de télécommande.

• Ne laissez pas et ne rangez pas le boîtier de télécommande dans les endroits suivants:

– très humides, par exemple près d’un bain

– très chauds, par exemple près d’un poêle ou d’un appareil de chauffage

– exposés à des températures très basses

–poussiéreux

• Installez la pile en respectant les repères de polarité (+ et –).

• Si les piles sont vieilles, la portée de la télécommande risque de diminuer considérablement. Le cas

échéant, remplacez les piles le plus rapidement possible par deux piles neuves.

• Si la pile est plate, retirez-la immédiatement de la télécommande pour éviter tout risque d'explosion

ou de fuite d'acide.

• Si vous remarquez une fuite au niveau des piles, mettez-les immédiatement au rebut en prenant soin

de ne pas toucher le produit qui a fui. Si le produit qui a fui entre en contact avec votre peau ou vos

yeux ou votre bouche, rincez immédiatement et consultez un médecin. Nettoyez soigneusement le

logement des piles avant de mettre en place des piles neuves.

• N’utilisez pas à la fois des piles neuves et des piles usagées. Cela risque de réduire la durée de vie des

nouvelles piles ou d'entraîner une fuite des piles usagées.

• N’utilisez pas non plus des piles de deux types différents (par exemple, des piles alcalines et des piles

au manganèse). Il y a risque d’explosion en cas d’erreur dans la mise en place des piles. Les

caractéristiques des piles peuvent être différentes même si elles semblent identiques.

• Avant de mettre la nouvelle pile en place, essuyez soigneusement le compartiment.

• Conservez les piles hors de portée des enfants. SI une pile est avalée accidentellement, contactez

immédiatement votre médecin.

• Si vous prévoyez de ne pas utiliser la télécommande pendant une période prolongée, retirez les piles

de la télécommande.

• N’essayez pas de charger ou de démonter les piles fournies.

Pour afficher le Mode d’emploi, cliquez sur « Français » sur l’écran qui s’affiche automatiquement

lorsque vous insérez le CD-ROM dans votre PC ou cliquez sur le nom du modèle si l’écran pour

sélectionner les modèles s’affiche, ensuite, cliquez sur « Français » sur l’écran suivant. Ensuite, suivez

les instructions à l’écran.

Si l’écran ne s’affiche pas automatiquement, ouvrez le fichier « index.html » sur le CD-ROM.

Vous pouvez télécharger le Mode d’emploi inclus sur le CD-ROM sur le site Web suivant:

URL : http://download.yamaha.com/

Information concernant la collecte et le traitement des piles usagées et

des déchets d’équipements électriques et électroniques

Les symboles sur les produits, l’emballage et/ou les documents joints signifient que les

produits électriques ou électroniques usagés ainsi que les piles ne doivent pas être

mélangés avec les déchets domestiques habituels.

Pour un traitement, une récupération et un recyclage appropriés des déchets

d’équipements électriques et électroniques et des piles usagées, veuillez les déposer aux

points de collecte prévus à cet effet, conformément à la réglementation nationale et aux

Directives 2002/96/EC et 2006/66/EC.

En vous débarrassant correctement des déchets d’équipements électriques et

électroniques et des piles usagées, vous contribuerez à la sauvegarde de précieuses

ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui

pourraient advenir lors d’un traitement inapproprié des déchets.

Pour plus d’informations à propos de la collecte et du recyclage des déchets

d’équipements électriques et électroniques et des piles usagées, veuillez contacter votre

municipalité, votre service de traitement des déchets ou le point de vente où vous avez

acheté les produits.

[Information sur le traitement dans d’autres pays en dehors de l’Union

Européenne]

Ces symboles sont seulement valables dans l’Union Européenne. Si vous souhaitez vous

débarrasser de déchets d’équipements électriques et électroniques ou de piles usagées,

veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de

traitement appropriée.

Note pour le symbole « pile » (les deux symboles du bas) :

Ce symbole peut être utilisé en combinaison avec un symbole chimique. Dans ce cas il

respecte les exigences établies par la Directive pour le produit chimique en question.

4 Fr Accessoires fournis

Avant le raccordement de l’appareil, vérifiez que vous disposez de tous les éléments

suivants.

* La forme de la fiche du câble d’alimentation varie selon le lieu d’achat de l’appareil.

Avant de mettre les piles en place ou d’utiliser la télécommande, assurez-vous de lire

les précautions au sujet de la télécommande et des piles dans ce livret.

À propos de ce Guide de référence rapide

Ce Guide de référence rapide fournit des instructions pour raccorder un téléviseur et

un lecteur BD/DVD à l’appareil, appliquer des réglages et lire des contenus. Pour de

plus amples informations sur les opérations, reportez-vous au Mode d’emploi sur le

CD-ROM fourni.

Lisez les consignes de sécurité décrites dans ce livret avant d’utiliser l’appareil.

Consultez la documentation accompagnant chaque appareil externe pour obtenir des

instructions concernant leur fonctionnement ou leur réglage.

• signale des explications supplémentaires permettant une meilleure utilisation.

• signale les précautions à prendre concernant l’utilisation de l’appareil et les

limites de ses fonctions.

Accessoires fournis

Télécommande Piles

(AAA, R03, UM-4) (x2)

Câble optique (1,5 m)

Câble d’alimentation

(2 m)*

Microphone IntelliBeam

(6 m)

Pied du microphone en

carton

Supports (x2) Vis (Pour les supports ; x2) Câble du caisson de basse

(3 m)

Câble de commande du

système (3 m)

• Mode d’emploi CD-ROM

• Guide de référence rapide (ce document)

• Guide d’installation MusicCast

Appareils et câbles nécessaires pour le raccordement

• Téléviseur • Lecteur BD/DVD • Câbles HDMI (x2)

Préparation de la télécommande

Insertion des piles

Portée

2 piles

(AAA, R03, UM-4)

Appuyez sur la flèche et

faites glisser le

couvercle dans le sens

de la flèche.

Faites glisser le couvercle pour le fermer.

Dans les 6 m

Страница загружается...

Yamaha YSP-5600 Инструкция по применению

Похожие модели бренда

Модели других брендов