Pioneer MVH-180UB Руководство пользователя

English Français Italiano Español Deutsch Nederlands Русский

DIGITAL MEDIA RECEIVER

RECEPTEUR NUMERIQUE MULTIMEDIA

RICEVITORE MULTIMEDIALE DIGITALE

RECEPTOR DIGITAL DE MEDIOS

DIGITALER MEDIA RECEIVER

DIGITALE MEDIA-RECEIVER

ЦИФРОВОЙ МЕДИАРЕСИВЕР

MVH-X380BT

MVH-180UI

MVH-180UBG

MVH-180UB

MVH-181UB

Owner’s Manual

Mode d’emploi

Manuale d’istruzioni

Manual de instrucciones

Bedienungsanleitung

Handleiding

Руководство пользователя

2En

Before You Start ......................................................................... 3

Getting Started .......................................................................... 4

Radio ............................................................................................ 7

USB/iPod/AUX ............................................................................ 8

Bluetooth................................................................................... 10

App Mode.................................................................................. 14

Using Pioneer ARC APP........................................................... 15

Settings...................................................................................... 16

FUNCTION settings ............................................................... 16

AUDIO settings....................................................................... 17

SYSTEM settings .................................................................... 18

ILLUMINATION settings........................................................ 19

MIXTRAX settings.................................................................. 19

Connections/Installation........................................................ 20

Additional Information........................................................... 23

About this manual:

• In the following instructions, a USB memory or USB audio player are referred

to as “USB device”.

• In this manual, iPod and iPhone are referred to as “iPod”.

Table of Contents

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC

English:

Hereby, Pioneer, declares that this MVH-X380BT is

in

compliance with the essential requirements

and other relevant provisions of Directive 1999/5/

EC.

Suomi:

Pioneer vakuuttaa täten että MVH-X380BT

t

yyppinen laite on direktiivin 1999/5/EY

oleellisten vaatimusten ja sitä koskevien

direktiivin muiden ehtojen mukainen.

Nederlands:

Hierbij verklaart Pioneer dat het toestel MVH-

X

380BT in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van

richtlijn 1999/5/EG

Français:

Par la présente Pioneer déclare que l’appareil

M

VH-X380BT est conforme aux exigences

essentielles et aux autres dispositions pertinentes

de la directive 1999/5/CE

Svenska:

Härmed intygar Pioneer att denna MVH-X380BT

s

tår I överens-stämmelse med de väsentliga

egenskapskrav och övriga relevanta

bestämmelser som framgår av direktiv 1999/5/EG.

Dansk:

Undertegnede Pioneer erklærer herved, at

f

ølgende udstyr MVH-X380BT overholder de

væsentlige krav og øvrige relevante krav i direktiv

1999/5/EF

Deutsch:

Hiermit erklärt Pioneer, dass sich dieses Gerät

M

VH-X380BT in Übereinstimmung mit den

grundlegenden Anforde-rungen und den

anderen relevanten Vorschriften der Richtlinie

1999/5/EG befindet". (BMWi)

Ελληνικά:

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Pioneer ΔΗΛΩΝΕΙ ΟΤΙ MVH-

X

380BT ΣΥΜ-ΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ

ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ

ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ

Italiano:

Con la presente Pioneer dichiara che questo MVH-

X

380BT è conforme ai requisiti essenziali ed alle

altre disposizioni pertinenti stabilite dalla direttiva

1999/5/CE.

Español:

Por medio de la presente Pioneer declara que el

M

VH-X380BT cumple con los requisitos esenciales

y cualesquiera otras disposiciones aplicables o

exigibles de la Directiva 1999/5/CE

Português:

Pioneer declara que este MVH-X380BT está

c

onforme com os requisitos essenciais e outras

disposições da Directiva 1999/5/CE.

Čeština:

Pioneer tímto prohlašuje, že tento MVH-X380BT je

v

e shodě se základními požadavky a dalšími

příslušnými ustanove-ními směrnice 1999/5/ES

Eesti:

Käesolevaga kinnitab Pioneer seadme MVH-

X

380BT vastavust direktiivi 1999/5/EÜ

põhinõuetele ja nimetatud direktiivist

tulenevatele teistele asjakohastele sätetele.

Magyar:

Alulírott, Pioneer nyilatkozom, hogy a MVH-

X

380BT megfelel a vo-natkozó alapvetõ

követelményeknek és az 1999/5/EC irányelv

egyéb elõírásainak.

Latviešu valoda:

Ar šo Pioneer deklarē, ka MVH-X380BT atbilst

D

irektīvas 1999/5/EK būtiskajām prasībām un

citiem ar to saistītajiem noteikumiem.

3En

English

Lietuvių kalba:

Šiuo Pioneer deklaruoja, kad šis MVH-X380BT

atitinka esminius reikalavimus ir kitas 1999/5/EB

Direktyvos nuostatas.

Malti:

Hawnhekk, Pioneer jiddikjara li dan MVH-X380BT

j

ikkonforma mal-ħtiġijiet essenzjali u ma

provvedimenti oħrajn relevanti li hemm fid-

Dirrettiva 1999/5/EC

Slovenčina:

Pioneer týmto vyhlasuje, že MVH-X380BT spĺňa

z

ákladné požiadavky a všetky príslušné

ustanovenia Smernice 1999/5/ES.

Slovenščina:

Pioneer izjavlja, da je ta MVH-X380BT v skladu z

b

istvenimi zahtevami in ostalimi relevantnimi

določili direktive 1999/5/ES.

Română:

Prin prezenta, Pioneer declara ca acest MVH-

X3

80BT este in conformitate cu cerintele esentiale

si alte prevederi ale Directivei 1999/5/EU.

български:

С настоящето, Pioneer декларира, че този MVH-

X

380BT отго-варя на основните изисквания и

други съответни постановления на Директива

1999/5/EC.

Polski:

Niniejszym Pioneer oświadcza, że MVH-X380BT

j

est zgodny z zasadniczymi wymogami oraz

pozostałymi stosownymi postanowieniami

Dyrektywy 1999/5/EC

Norsk:

Pioneer erklærer herved at utstyret MVH-X380BT

e

r i samsvar med de grunnleggende krav og

øvrige relevante krav i direktiv 1999/5/EF.

Íslenska:

Hér með lýsir Pioneer yfir því að MVH-X380BT er í

sa

mræmi við grunnkröfur og aðrar kröfur, sem

gerðar eru í tilskipun 1999/5/EC

Hrvatski:

Ovime tvrtka Pioneer izjavljuje da je ovaj MVH-

X

380BT u skladu osnovnim zahtjevima i ostalim

odredbama Direktive 1999/5/EC.

Türkçe:

Bu vesile ile, PIONEER, bu MVH-X380BT için 1999/

5

/EC Direktifinin esas şartları ve diğer ilgili

hükümlerine uygunluğu beyan eder.

Thank you for purchasing this PIONEER product

To ensure proper use, please read through this manual before using this product. It is

especially important that you read and observe WARNINGs and CAUTIONs in this manual.

Please keep the manual in a safe and accessible place for future reference.

Private households in the member states of the EU, in Switzerland and Norway may return

their used electronic products free of charge to designated collection facilities or to a

retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct

method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment,

recovery and recycling and thus prevent potential negative effects on the environment and

human health.

WARNING

• Do not attempt to install or service this product by yourself. Installation or servicing

of this product by persons without training and experience in electronic equipment

and automotive accessories may be dangerous and could expose you to the risk of

electric shock, injury or other hazards.

• Do not attempt to operate the unit while driving. Make sure to pull off the road and park

your vehicle in a safe location before attempting to use the controls on the device.

CAUTION

• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock

could result. Also, damage to this unit, smoke, and overheating could result from contact

with liquids.

• Always keep the volume low enough to hear outside sounds.

• The CarStereo-Pass is for use only in Germany.

Before You Start

If you want to dispose this product, do not mix it with general household waste. There is a

separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

4En

•This product is evaluated in moderate and tropical climate condition under the Audio,

video and similar electronic apparatus - Safety requirements, IEC 60065.

If you experience problems

Should this unit fail to work properly, please contact your dealer or nearest authorized

PIONEER Service Station.

MVH-X380BT/180UI/180UBG/180UB/181UB

* The button indications vary depending on the unit.

Remote Control

NOTE

Remote control is supplied only for MVH-181UB.

Getting Started

Basic operation

SRC (source)/OFF

Detach button

Display windowM.C. (multi-control) dial

BAND/

*

DISP (display)

Frequently used operations

Purpose

Operation

Head Unit Remote Control

Turn on the power* Press SR

C/OFF to turn

on the power.

Press and hold SR

C/OFF

to turn off the power.

Press SR

C to turn on the

power.

Press and hold SRC to

turn off the power.

Adjust the volume Turn the M.

C. dial. Press VOLUME + or –.

Press MU

TE to mute the

unit. Press again to

unmute.

Select a source Press SR

C/OFF

repeatedly.

Press SRC repeatedly.

Change the display

info

rmation

Press DISP repeatedly. Press DISP repeatedly.

Return to the previous

d

isplay/list

Press BAND/ . Press / to select the

next/previous folder.

Return to the normal

di

splay from the menu

Press and hold BAND/

.

–

Answering a call Press . –

Ending a call Press . –

/

SRC (source)

VOLUME +/–

MUTE

DISP (display)

FUNCTION

AUDIO

5En

English

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control

terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the

antenna, turn the source off.

Display indication

Detach the front panel to prevent theft. Remove any cables and devices

attached to the front panel and turn off the unit before detaching it.

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when a Bluetooth telephone is connected to this unit by

HF

P (Hands Free Profile) (page 10) and flashes while the

telephone is on hold. (Only for Bluetooth-compatible models.)

Appears when a Bluetooth audio player is connected to this unit

b

y A2DP (Advanced Audio Distribution Profile) (page 10).

(Only for Bluetooth-compatible models.)

Appears when the button is pressed.

Appears when the local seek tuning function is set (page 16).

Appears when a traffic program is received.

Appears when the TA (traffic announcements) function is set

(page 16).

Appears when the sound retriever function is set (page 17).

Appears when random/shuffle play is set (except when BT AUDIO

i

s selected as the source).

Appears when repeat play is set (except when BT AUDIO is

sel

ected as the source).

Appears when the iPod control function is set (page 10).

Appears when a Bluetooth connection is made (page 10).

(Only for Bluetooth-compatible models.)

Detaching the front panel

Important

• Avoid subjecting the front panel to excessive shock.

• Keep the front panel out of direct sunlight and high temperatures.

• Always store the detached front panel in a protective case or bag.

Remove the insulation sheet before use.

WARNING

• Do not ingest the battery, Chemical Burn Hazard.

• This product, including the supplied remote control, contains a coin/button cell battery. If

the coin/button cell battery is swallowed, it can cause severe internal burns in just two

hours and can lead to death.

• Keep new or used batteries out of the reach of children. If the battery is swallowed or

placed inside any part of the body, consult a doctor immediately.

Preparing the remote control

Detach Attach

How to replace the battery

Insert the CR2025 (3 V) battery with the plus (+) and

minus (–) poles orientated properly.

6En

• If the battery compartment does not close securely, stop using the product and keep it

away from children.

• Do not expose the battery or remote control to excessive heat such as direct sunlight or

fire.

CAUTION

• There is a potential danger of explosion if the battery is incorrectly replaced. When

replacing the battery, replace it with the same type.

• Do not handle or store the battery with metallic tools or objects.

• If the battery leaks, remove the battery and wipe the remote control completely clean.

Then install a new battery.

• When disposing of used batteries, please comply with governmental regulations or

environmental public institutions’ rules that apply in your country/area.

Important

• Do not store the remote control in high temperatures or direct sunlight.

• Do not let the remote control fall onto the floor, where it may become jammed under the

brake or accelerator pedal.

When you turn the ignition switch to ON after installation, [SET UP :YES]

appears in the display.

1 Press the M.C. dial.

The setup menu disappears after 30 seconds of no operation. If you prefer

n

ot to set at this time, turn the M.C. dial to select [NO], then press to

confirm.

2 Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

Setup menu

Menu Item Description

LANGUAGE Select the language to display the text information from

a

compressed audio file.

[ENG](English),

[РУС

](Russian),

[TUR](Turkish)

CLOCK SET Set the clock.

3 [QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.

C. dial to select

[QUIT :NO], then press to confirm.

4 Press the M.C. dial to confirm the settings.

NOTES

• You can cancel the menu setting by pressing SRC/OFF.

• These settings can be made at any time from the SYSTEM settings (page 18) and INITIAL

settings (page 6).

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

4 Turn the M.C. dial to select [YES], then press to confirm.

1 Press and hold SRC/OFF until the unit turns off.

2 Press and hold SRC/OFF to display the main menu.

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

4 Turn the M.C. dial to select an option, then press to confirm.

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

Canceling the demonstration display (DEMO

OFF)

INITIAL settings

Menu Item Description

7En

English

NOTE

The options vary depending on the unit.

The tuner frequencies on this unit are allocated for use in Western Europe,

Asia, the Middle East, Africa and Oceania. Use in other areas may result in poor

reception. The RDS (radio data system) function only works in areas that

broadcast RDS signals for FM stations.

Menu Item Description

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

SP-P/O MODE Select when there is a full-range speaker connected to

t

he rear speaker output leads and there is a subwoofer

connected to the RCA output.

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected

d

irectly to the rear speaker output leads and there is a

subwoofer connected to the RCA output.

[REAR/REAR] Select when there are full-range speakers connected to

th

e rear speaker output leads and RCA output. If there is

a full-range speaker connected to the rear speaker

output leads, and the RCA output is not used, you may

select either [REAR/SUB.W] or [REAR/REAR].

S/W UPDATE Select to update the unit to the latest Bluetooth

s

oftware. For details on Bluetooth software and

updating, visit our website.

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

restarted automatically.

(Some of the settings will be retained even after

r

esetting the unit, such as Bluetooth pairing information,

etc.)

[YES], [CANCEL]

Radio

1 Press SRC/OFF to select [RADIO].

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or

[LW].

3 Press a number button (1/ to 6/ ).

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to

[PCH] in the FUNCTION settings (page 17).

The six strongest stations are stored on the number buttons (1/ to 6/ ).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1 After selecting the band, press / to select a station.

Press and hold / then release to seek an available station.

Scanning stops when the unit receives a station. To cancel seek tuning,

press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 17).

To store stations manually

1 While receiving the station you want to store, press and hold one of the

number buttons (1/ to 6/ ) until it stops flashing.

Receiving preset stations

Best stations memory (BSM)

8En

The unit searches for a station by PTY (program type) information.

1 Press during FM reception.

2 Turn the M.C. dial to select a program type from [NEWS/INFO],

[POPULAR], [CLASSICS] or [OTHERS].

3 Press the M.C. dial.

The unit begins to search for a station. When it is found, its program service

na

me is displayed.

NOTES

• To cancel the search, press the M.C. dial.

• The program of some stations may differ from that indicated by the transmitted PTY.

• If no station is broadcasting the type of program you searched for, [NOT FOUND] is

displayed for about two seconds and then the tuner returns to the original station.

PTY list

For more details about PTY list, visit the following site:

http://www.pioneer.eu/eur/products/25/121/tech/CarAudio/PTY.html

NOTE

iPod function is not available for MVH-180UBG/180UB/181UB.

Disconnect headphones from the device before connecting it to the unit.

Using PTY functions

USB/iPod/AUX

Playing back

USB devices (including Android™)/iPod

1 Open the USB port cover.

2 Plug in the USB device/iPod using an appropriate cable.

NOTE

To automatically switch to [USB] source when a USB device/iPod is connected to the unit,

set [USB AUTO] to [ON] in the SYSTEM settings (page 18).

CAUTION

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device

connected directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 15.

MTP connection

A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using

the cable supplied with the device. However, depending on the connected device and the

numbers of the files in the device, audio files/songs may not be able to be played back via

MTP. Note that MTP connection is not compatible with WAV and FLAC* file formats, and

cannot be used with the MIXTRAX function.

* The FLAC files are only compatible with MVH-180UI/180UBG/180UB/181UB.

AUX input jack (3.5 mm stereo jack)

USB port

SRC (source)/OFF

M.C. (multi-control) dial

9En

English

NOTE

If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the

SYSTEM settings

(page 19).

AUX

1 Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source

(page 18).

You can make various adjustments in the FUNCTION settings (page 16).

Note that the following operations do not work for an AUX device. To operate

an

AUX device, use the device itself.

Operations

Purpose Operation

Select a folder/album*1 Press 1/ or 2/ .

Select a track/song (chapter) Press or .

Fast forward or reverse*3 Press and hold or .

Search for a file from a list 1 Press to display the list.

2 Tu

rn the M.C. dial to select the

desired file (folder) name or

category, then press to confirm.

3 Tu

rn the M.C. dial to select the

desired file, then press to confirm.

Playback starts.

View a list of the files in the selected

fo

lder/category*1

Press the M.C. dial when a folder/

category is selected.

Play a song in the selected folder/

cat

egory*1

Press and hold the M.C. dial when a

folder/category is selected.

*1 Compressed audio files only

*2 When there is no 3/S.Rtrv. button on the unit, the sound retriever function can be set by

the FUNCTION settings.

*3 When you use the fast forward or reverse function while playing a VBR file, the playback

time may be not correct.

Alphabetical search (iPod only) 1 Press to display the list.

2 Tu

rn the M.C. dial to select the

desired category list, then press

to enter the alphabetical search

mode

.

(Turning the M.

C. dial twice also

enters the alphabetical search

mode.)

3 Tu

rn the M.C. dial to select a letter,

then press to display the

alphabetical list.

To cancel alphabetical search, press

BAN

D/ .

Repeat play Press 6/ .

Random/shuffle play Press 5/ .

Shuffle all play (iPod only) Press and hold 5/ .

Pause/resume playback Press 4/PA

USE.

Sound retriever*2 Press 3/S.

Rtrv.

[1]: Effective for low compression rates

[2]: Effective for high compression

ra

tes

Return to root folder (USB only)*1 Press and hold .

Change drives in USB device

(Devices that support the USB mass

s

torage device class protocol only)

Press BAND/

.

Purpose Operation

10En

Link play mode

You can access songs based on the artist, album, or genre currently playing.

1 While listening to a song, press and hold to enter the link play mode.

2 Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then

press to confirm.

The selected song/album will be played after the currently playing song.

NOTE

The selected song/album may be canceled if you use functions other than those from the

link play mode (e.g. fast forward and reverse).

iPod control

You can control the unit via a connected iPod.

The following iPod models are not compatible with this function.

–iPod nano 1st generation, iPod with video

1 Press BAND/ during playback, then select the control mode.

[CO

NTROL iPod]: The unit’s iPod function can be operated from the

connected iPod.

[CO

NTROL AUDIO]: The unit’s iPod function can only be operated by the

buttons on the unit or supplied remote control. In this mode, the connected

iPod cannot be turned on or off.

NOTES

• Pressing iPod can also switch the control mode (only for MVH-180UI).

• Switching the control mode to [CONTROL iPod] pauses song playback. Use the connected

iPod to resume playback.

• The following operations are still accessible from the unit, even if the control mode is set

to [CONTROL iPod].

– Pause, fast forward/reverse, song/chapter selection

• The volume can only be adjusted from the unit.

Useful functions for iPod

(Only for MVH-X380BT)

The MIXTRAX function creates a non-stop mix of your music library. For details

on MIXTRAX settings, see page 19.

NOTES

• This function is not compatible with an Android device connected via MTP.

• When USB is selected as a source and the MIXTRAX function is in use, the sound retriever

function is disabled.

• Depending on the file/song, sound effects may not be available.

1 Press 3/MIX to turn MIXTRAX on/off.

(Only for MVH-X380BT)

Important

If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected,

they may not work properly.

1 Turn on the Bluetooth function of the device.

2 Press to display the phone menu.

3 Turn the M.C. dial to select [BT SETTING], then press to confirm.

4 Turn the M.C. dial to select [ADD DEVICE], then press to confirm.

The unit starts to search for available devices, then displays them in the

de

vice list.

• T

o cancel searching, press the M.C. dial.

• I

f the desired device is not in the list, select [RE-SEARCH].

• If the

re is no device available, [NOT FOUND] appears in the display.

About MIXTRAX (USB/iPod only)

Bluetooth

Bluetooth connection

11En

English

5 Turn the M.C. dial to select a device from the device list, then press to

confirm.

Press and hold the M.C

. dial to switch the displayed device information

between the Bluetooth device address and device name.

6 Select [Pioneer BT Unit] shown in the device display.

7 Make sure the same 6-digit number appears on this unit and the device,

then select “Yes” on the device.

NOTES

• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this

case, delete one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the

Bluetooth settings (page 11).

• Depending on the device, the PIN code is required in step 7. In this case, input [0000].

TIP

The Bluetooth connection can be also made by detecting the unit from the Bluetooth

device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a

Bluetooth device operations, refer to the operating instructions supplied with the

Bluetooth device.

Bluetooth settings

Menu Item Description

DEVICELIST Display the list of paired Bluetooth devices. “*” appears

o

n the device name when the Bluetooth connection is

established.

DEL DEVICE Delete the device information.

[DELETE YES],

[

DELETE NO]

ADD DEVICE Register a new device.

A.CONN Select [ON] to connect to a Bluetooth device

a

utomatically.

[ON], [OFF]

First, make a Bluetooth connection with the Bluetooth telephone (page 10).

Up to two Bluetooth telephones can be connected simultaneously.

Important

• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is

not running can drain the vehicle’s battery.

• Be sure to park your vehicle in a safe place and apply the parking brake before operation.

VISIBLE Select [ON] so that a Bluetooth device can detect the

unit when the unit is connected via Bluetooth to another

device.

[ON], [OFF]

PIN CODE Change the PIN code.

1 P

ress the M.C. dial to display the setting mode.

2 Tu

rn the M.C. dial to select a number.

3 P

ress the M.C. dial to move the cursor to the next

position.

4 Af

ter inputting the PIN code, press and hold the M.C.

dial.

After inputting the PIN code, pressing the M.

C. dial

returns you to the PIN code input display, and you can

change the PIN code.

DEV. INFO Switch the device information on the display between

th

e device name and Bluetooth device address.

GUEST MODE Select [ON] to move to the [DEL DEVICE] screen

automatically when the unit has already been paired

with three devices.

[ON], [OFF]

A.PAIRING Select [ON] to pair the unit and iPhone automatically

wh

en an iPhone is connected to the unit via USB. (This

function may not be available depending on the version

of iOS you are using.)

[ON], [OFF]

Bluetooth telephone

Menu Item Description

12En

To make a phone call

1 Press to display the phone menu.

When two phones are connected, a phone

name appears first then a phone

menu will display. To switch to another phone, press again.

2 Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to

confirm.

If you select [PHONE BOOK], proceed to step 4.

3 Turn the M.C. dial to select [MISSED], [DIALLED] or [RECEIVED], then

press to confirm.

4 Turn the M.C. dial to select a name or phone number, then press to

confirm.

The phone call starts.

To answer an incoming call

1 Press when a call is received.

TIP

When two phones are connected to the unit via Bluetooth and there is an incoming call

while one phone is being used for a call, a message will appear in the display. To answer that

incoming call, you need to end the existing call.

Basic operations

Purpose Operation

End a call Press .

Reject an incoming call Press and hold when a call is received.

Switch between the current

calle

r and a caller on hold

Press the M.C. dial.

Cancel a caller on hold Press and hold .

To preset phone numbers

1 Select a phone number from a phone book or call history.

2 Press and hold one of the number buttons (1/ to 6/ ).

The contact is stored in the selected preset number.

To make a call using a preset number, press one of the number buttons (1/

to 6/ ), then press the M.

C. dial.

Voice recognition (Only for iPhone)

This function is only available when an iPhone equipped with voice

recognition is connected to the unit via Bluetooth.

1 Press and hold to activate the voice recognition mode.

2 Press the M.C. dial and then talk into the microphone to input voice

commands.

To exit the voice recognition mode, press BA

ND/ .

NOTE

For details on the voice recognition features, refer to the manual supplied with your iPhone.

Adjust the volume of the

caller’s voice (When private

mode is on, this function is not

available.)

Turn the M.

C. dial during the call.

Turn the privacy mode on or

of

f

Press BAND/ during the call.

Purpose Operation

13En

English

Phone menu

Menu Item Description

RECENTS Display the missed call history.

[MISSED]

[DIALLED] Display the dialed call history.

[RECEIVED] Display the received call history.

PHONE BOOK*1 Display the contacts which have been transferred from

y

our phone. Set [VISIBLE] in the Bluetooth settings to

[ON] to browse the contacts via this unit.

PRESET 1-6 Recall the preset phone numbers. You can also recall the

pr

eset phone numbers by pressing one of the number

buttons (1/ to 6/ ).

A.ANSR*2 Select [ON] to answer an incoming call automatically.

[ON], [OFF]

R.TONE Select [ON] if the ring tone does not come out from the

car spe

akers. Depending on the connected phone, this

function may not work.

[ON], [OFF]

PB INVT Invert the order of names in the phone book (name

view).

PB A.SYNC Select whether or not to transfer the contacts from your

pho

ne automatically when your phone is connected to

the unit.

• W

hen connected for the first time, the contacts from

your phone are transferred automatically, regardless of

the [PB A.SYNC] setting.

• I

f you switch from [ON] to [OFF], the auto

synchronization will not be performed on the next

connection.

• I

f you switch from [OFF] to [ON], the auto

synchronization will be performed when your phone is

connected to the unit.

• D

uring the auto synchronization, you cannot cancel

the synchronization, even if you select [OFF].

[ON], [OFF]

*1 The contacts on your phone will normally be transferred automatically when the phone

is connected. If they are not, use your phone to transfer the contacts.

*2 If two phones are connected, this function does not work on incoming calls that are

received while one of the phones is being used for a call.

Important

• Depending on the Bluetooth audio player connected to this unit, the available operations

will be limited to the following two levels:

– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio

player.

– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback,

pause, select song, etc.

• The sound of the Bluetooth audio player will be muted when the phone is in use.

• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone

automatically.

• Depending on the type of Bluetooth audio player you have connected to this unit,

operation and information displayed may vary based on availability and functionality.

1 Make a Bluetooth connection with the Bluetooth audio player.

2 Press SRC/OFF to select [BT AUDIO] as the source.

3 Press BAND/ to start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 16).

BT SETTING You can adjust various settings for Bluetooth

connections. For details on Bluetooth settings, see

page 11.

Bluetooth audio

Purpose Operation

Fast forward or reverse Press and hold or .

Select a track Press or .

Repeat play* Press 6/ .

Menu Item Description

14En

* Depending on the connected device, these operations may not be available.

(APP mode is not available for MVH-180UBG/180UB/181UB.)

You can enjoy listening to an application

on an iPhone/Android device via the

unit. In some cases, you can control an application by using the unit.

For details on compatible devices, visit our website.

Important

Use of third party apps may involve or require the provision of personally identifiable

information, whether through the creation of a user account or otherwise, and for certain

applications, the provision of geolocation data.

ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING

WITHOUT LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY

PRACTICES. BY ACCESSING THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF

SERVICE AND PRIVACY POLICIES OF THE PROVIDERS. IF YOU DO NOT AGREE WITH THE

TERMS OR POLICIES OF ANY PROVIDER OR DO NOT CONSENT TO THE USE OF

GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY APP.

For iPhone users

This function is compatible with iPhones and iPod touches installed with iOS 5.0 or later.

For Android device users

This function is compatible with devices that have Android OS 2.3 or later installed and also

support Bluetooth SPP (Serial Port Profile) and A2DP (Advance Audio Distribution Profile).

Random play* Press 5/ .

Pause/resume playback Press 4/PA

USE.

Search for a file from a list 1 P

ress to display a list.

2 Tu

rn the M.C. dial to select the

desired folder name, then press to

confirm.

3 Tu

rn the M.C. dial to select the

desired file, then press to confirm.

Playback starts.

App Mode

Purpose Operation

NOTE

PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT

LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF

SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER.

The Bluetooth connection is available for MVH-X380BT.

1 Connect this unit with the mobile device.

• iP

hone via USB (page 8)

• A

ndroid device via Bluetooth (page 10)

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [SYSTEM], then press to confirm.

4 Turn the M.C. dial to select [APP CONN.SET], then press to confirm.

5 Turn the M.C. dial to select one of the below.

• Se

lect [WIRED] for iPhone.

• S

elect [BLUETOOTH] for an Android device.

6 Press SRC/OFF to select [APP].

7 Operate the mobile device to start up the application.

Basic operations

You can make various adjustments in the FUNCTION settings (page 16).

Playback of an application via the unit

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press BAND/ .

15En

English

(Pioneer ARC APP for iPhone is not available for MVH-180UBG/180UB/181UB.)

You can operate the unit from Pioneer ARC APP installed on an iPhone/

Android device. In some cases, you can control aspects of the application, such

as source selection, pause, etc., by using the unit.

For details on what operations are available on the application, see the

ap

plication’s help section.

WARNING

Do not attempt to operate the application while driving. Make sure to pull off the road and

park your vehicle in a safe location before attempting to use the controls on the application.

For iPhone users

This function is compatible with iPhones (iPhone 5 or later) and iPod touches

in

stalled with iOS 8.0 or later.

You can download Pioneer ARC APP on iTunes App Store.

For Android device users

This function is compatible with devices that have Android OS 4.1 or later

i

nstalled and also support Bluetooth SPP (Serial Port Profile) and AOA (Android

Open Accessory) 2.0.

You can download Pioneer ARC APP on Google Play™.

NOTE

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to

their own software design, regardless of the OS version.

The Bluetooth connection is available for MVH-X380BT.

1 Connect this unit with the mobile device.

• i

Phone/Android device via USB (page 8)

• A

ndroid device via Bluetooth (page 10)

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [SYSTEM], then press to confirm.

Using Pioneer ARC APP

Making a connection with Pioneer ARC APP

4 Turn the M.C. dial to select [APP CONN.SET], then press to confirm.

5 Turn the M.C. dial to select one of the below.

• S

elect [WIRED] for a device connected via USB.

• Se

lect [BLUETOOTH] for an Android device connected via Bluetooth.

Proceed to step 9 if you select the USB connection for iPhone or the

B

luetooth connection.

6 Press BAND/ to display the previous menu list.

7 Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.

8 Turn the M.C. dial to select [APP CONTROL] for an Android device

connected via USB.

If [ON] is selected in [P.APP AUTO ON] (page 19), Pioneer ARC APP on the

Android device starts automatically, and all the steps are finished.

NOTE

If Pioneer ARC APP has not been installed on your Android device yet, a message that

prompts you to install the application will appear on your Android device. Select [OFF]

in [P.APP AUTO ON] to clear the message (page 19).

9 Press SRC/OFF to select any source.

10 Launch Pioneer ARC APP on the mobile device.

NOTE

You can also launch the application by pressing and holding the M.C. dial if you select

the USB connection for iPhone or the Bluetooth connection.

1 Press SRC/OFF to select [ANDROID].

Basic operations

Listening to music on Android

Purpose Operation

Select a track Press or .

16En

* When there is no 3/S.Rtrv button on the unit, the sound retriever function can be set by

the FUNCTION settings.

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select one of the categories below, then press to

confirm.

• FUNCTION settings (page 16)

• AUDIO settings (page 17)

• SYSTEM settings (page 18)

• ILLUMINATION settings (page 19)

• MIXTRAX settings (page 19)

3 Turn the M.C. dial to select the options, then press to confirm.

NOTES

• The Bluetooth-related menu items in the following tables are not available for MVH-

180UI/180UBG/180UB/181UB.

• iPod-related menu items in the following tables are not available for MVH-180UBG/

180UB/181UB.

• APP mode-related menu items in the following tables are not available for MVH-180UBG/

180UB/181UB.

Fast forward or reverse Press and hold or .

Pause/resume playback Press 4/PA

USE.

Sound retriever* Press 3/S.

Rtrv.

[1]: Effective for low compression rates

[2]: Effective for high compression

ra

tes

Settings

Purpose Operation

The menu items vary according to the source.

FUNCTION settings

Menu Item Description

FM SETTING

[TALK], [STANDARD], [MUSIC] Match the sound quality level with the

bro

adcast signal conditions of the FM band

signal. (Available only when FM band is

selected.)

BSM

Store the six strongest stations on the

num

ber buttons (1/ to 6/ )

automatically.

REGIONAL

[ON], [OFF] Limit the reception to the specific regional

pro

grams when AF (alternative frequencies

search) is selected. (Available only when

FM band is selected.)

LOCAL

FM: [O

FF], [LV1], [LV2], [LV3],

[LV4]

MW/LW: [O

FF], [LV1], [LV2]

Restrict the tuning station according to the

sign

al strength.

TA

[ON], [OFF] Receive current traffic information if

av

ailable. (Available only when FM band is

selected.)

AF

[ON], [OFF] Allow the unit to retune to a different

freq

uency providing the same station.

(Available only when FM band is selected.)

17En

English

NEWS

[ON], [OFF] Interrupt the currently selected source with

news programs. (Available only when FM

band is selected.)

SEEK

[MAN], [PCH] Assign or buttons to seek the

stations one by one (manual tuning) or

sel

ect a station from the preset channels.

SEL DEVICE

Connect a Bluetooth device in the list.

S.RTRV

[1] (effective for low

co

mpression rates),

[2] (effective for high

co

mpression rates),

[OFF]

Enhance compressed audio and restore

ri

ch sound.

Not available when:

• U

SB is selected as a source and the

MIXTRAX function is set to on.

• The FL

AC file is played back. (Available for

MVH-180UI/180UBG/180UB/181UB)

AUDIO BOOK

[FASTER], [NORMAL],

[S

LOWER]

Change the playback speed. (Not available

when [CONTROL iPod] is selected in the

control mode.)

PAUSE

Pause or resume playback.

PLAY

Start playback.

STOP

Stop playback.

Menu Item Description

USB

iPod

AUDIO settings

Menu Item Description

FADER*1

Adjust the front and rear speaker balance.

BALANCE

Adjust the left and right speaker balance.

EQ SETTING

[SUPER BASS], [POWERFUL],

[NATURAL], [VOCAL],

[CUSTOM1], [CUSTOM2],

[FLAT]

Select an equalizer band and

l

evel for further customizing.

Equalizer band: [80HZ],

[250HZ], [800HZ], [2.5KHZ],

[8KHZ]

Equalizer level: [+

6] to [–6]

Select or customize the equalizer curve.

[CUSTOM1] can be set separately for each

source. However, each of the below

combinations are set to the same setting

automatically.

• U

SB, iPod, ANDROID, and APP (iPhone)

• B

T AUDIO, ANDROID, and APP (Android)

[CUSTOM2] is a shared setting used for all

so

urces.

You can also switch the equalizer by

pr

essing repeatedly (Only for

MVH-180UBG/180UB/181UB).

LOUDNESS

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

SUB.W*2

[NOR], [REV], [OFF] Select the subwoofer phase.

SUB.W CTRL*2

*3

Cut-off frequency: [50H

Z],

[63HZ], [80HZ], [100HZ],

[125HZ], [160HZ], [200HZ]

Output level: [–24] t

o [+6]

Slope level: [–

12], [–24]

Only frequencies lower than those in the

selected range are output from the

subwoofer.

BASS BOOST

[0] to [+6] Select the bass boost level.

18En

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings

(page 7).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings

(page 7).

*3 Not available when [OFF] is selected in [SUB.W].

You can also access to these menus when the unit is turned off.

HPF SETTING

Cut-off frequency: [O

FF],

[50HZ], [63HZ], [80HZ],

[100HZ], [125HZ], [160HZ],

[200HZ]

Slope level: [–12],

[–24]

Only frequencies higher than the high-pass

filter (HPF) cutoff are output from the

speakers.

SLA

[+4] to [–4] Adjust the volume level for each source

except FM.

Each of the below combinations are set to

t

he same setting automatically.

• U

SB, iPod, ANDROID, and APP (iPhone)

• B

T AUDIO, ANDROID, and APP (Android)

SYSTEM settings

Menu Item Description

LANGUAGE

[ENG](English), [РУС]

(Russian), [TUR](Turkish)

Select the language to display the text

information from a compressed audio file.

CLOCK SET

Set the clock (page 6).

12H/24H

[12H], [24H] Select the time notation.

Menu Item Description

AUTO PI

[ON], [OFF] Search for a different station with the same

pro

gramming, even if using a preset

station.

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

co

nnected to the unit.

USB AUTO

[ON], [OFF] Select [ON] to automatically switch to

[U

SB] source when a USB device/iPod is

connected to the unit.

Select [OFF] when a USB device/iPod is

being

connected to the unit just for

charging.

BT AUDIO

[ON], [OFF] Set the Bluetooth signal on/off.

MUTE MODE (Only for MVH-180UI)

[MUTE], [20dB ATT], [10dB

AT

T]

Mute or attenuate sound automatically

when a signal from equipment with a mute

function is received.

PW SAVE*

[ON], [OFF] Reduce the battery power consumption.

Turning on the source is the only operation

all

owed when this function is on.

BT MEM CLEAR

[YES], [CANCEL] Clear the Bluetooth device data (device list,

PI

N code, call history, phone book, preset

phone numbers) stored in the unit.

[CLEARED] appears when data is

successfully deleted.

Menu Item Description

19En

English

* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned

back on once the battery is reconnected. When [PW SAVE] is off, depending on

connection methods, the unit may continue to draw power from the battery if your

vehicle’s ignition does not have an ACC (accessory) position.

BT VERSION

Displays the system version of the unit and

th

e Bluetooth module.

APP CONN.SET

[WIRED], [BLUETOOTH] Select the appropriate connection method

acco

rding to your device.

ANDROID WIRED

[MEMORY], [APP CONTROL] Select the appropriate connection method

f

or an Android device.

• This s

etting is not available when

[BLUETOOTH] is selected in [APP

CONN.SET].

P. A PP AU TO O N

[ON], [OFF]

Select [ON] to automatically launch the car

remote application when an Android device

is connected to the unit via AOA. (Not

available when [MEMORY] is selected in

[ANDROID WIRED].)

ILLUMINATION settings

Menu Item Description

DIM SETTING

[SYNC CLOCK], [MANUAL] Change the display brightness.

BRIGHTNESS

[1] to [10] Change the display brightness.

The available setting ranges differ

d

epending on [DIM SETTING].

Menu Item Description

(Only for MVH-X380BT)

MIXTRAX settings

Menu Item Description

SHORT PLAYBCK

[1.0 MIN], [1.5 MIN], [2.0 MIN],

[2.5 MIN], [3.0 MIN], [OFF]

Select the length of the playback time.

MIX PATTERN

[SOUND LEVEL] Change the MIXTRAX special effects

acco

rding to the audio level.

The mix pattern changes according to

t

he sound level.

[LOW PASS] The mix pattern changes according to

th

e bass level.

[RANDOM] The mix pattern changes randomly

acco

rding to the sound level mode and

low pass mode.

DISPLAY FX

[ON], [OFF] Set the MIXTRAX special effects on/off.

CUT IN FX

[ON], [OFF] Turn the MIXTRAX sound effects on/off

wh

ile manually changing the tracks.

20En

Important

• When installing this unit in a vehicle

without an ACC (accessory) position

on the ignition switch, failure to

connect the red cable to the terminal

that detects operation of the ignition

key may result in battery drain.

• Use of this unit in conditions other

than the following could result in fire

or malfunction.

– Vehicles with a 12-volt battery and

nega

tive grounding.

– When speaker output is used by 4

channe

ls, use speakers over 50 W

(maximum input power) and

between 4 Ω to 8 Ω (impedance

value). Do not use 1 Ω to 3 Ω

speakers for this unit.

– When rear speaker output is used

b

y 2 Ω of subwoofer, use speakers

over 70 W (maximum input power).

* Please refer to connections for a

c

onnection method.

• T

o prevent a short-circuit,

overheating or malfunction, be sure

to follow the directions below.

– Disconnect the negative terminal

of

the battery before installation.

– Secure the wiring with cable

cl

amps or adhesive tape. Wrap

adhesive tape around wiring that

comes into contact with metal

parts to protect the wiring.

– Place all cables away from moving

p

arts, such as the shift lever and

seat rails.

– Place all cables away from hot

places,

such as near the heater

outlet.

– Do not connect the yellow cable to

t

he battery by passing it through

the hole to the engine

compartment.

– Cover any disconnected cable

c

onnectors with insulating tape.

– Do not shorten any cables.

– Never cut the insulation of the

po

wer cable of this unit in order to

share the power with other devices.

The current capacity of the cable is

limited.

– Use a fuse of the rating prescribed.

– Never wire the negative speaker

cable d

irectly to ground.

– Never band together negative

cab

les of multiple speakers.

• W

hen this unit is on, control signals

are sent through the blue/white

cable. Connect this cable to the

system remote control of an external

power amp or the vehicle’s auto-

antenna relay control terminal (max.

300mA 12 V DC). If the vehicle is

equipped with a glass antenna,

Connections/Installation

Connections

ACC position No ACC position

connect it to the antenna booster

power supply terminal.

• Never connect the blue/white cable

to the power terminal of an external

power amp. Also, never connect it to

the power terminal of the auto

antenna. Doing so may result in

battery drain or a malfunction.

• The bl

ack cable is ground. Ground

cables for this unit and other

equipment (especially, high-current

products such as power amps) must

be wired separately. If they are not,

an accidental detachment may result

in a fire or malfunction.

• The g

raphical symbol placed

on the product means direct current.

This unit

Microphone 4 m (Only for MVH-

X380BT)

Rear output or subwoofer output

Front output (Only for MVH-

X380BT/180UI)

Antenna input

Power cord input

Fuse (10 A)

Wired remote input (Only for MVH-

X380BT/180UI)

Hard-wired remote control adapter

c

an be connected (sold separately).

Microphone input (Only for MVH-

X380BT)

Power cord

To power cord input

Depending on the kind of vehicle,

the function of and may be

different. In this case, be sure to

co

nnect to and to .

Yel low

Back-up (or accessory)

Yel low

Connect to the constant 12 V

su

pply terminal.

Red

MVH-X380BT/180UI/180UBG/180UB/

181UB

Страница загружается...

Pioneer MVH-180UB, MVH-180UBG, MVH-180UI, MVH-181UB, MVH-X380BT Руководство пользователя

Похожие модели бренда

Модели других брендов