Yamaha V3 Инструкция по применению

EN

OWNER’S MANUAL

Version 3.0

Getting Started

DME Designer Owner’s Manual

2

Getting Started with DME Designer

In this manual the abbreviation “DME” refers to the DME64N/DME24N/DME8i-C/DME8o-C/DME4io-C/

DME8i-ES/DME8o-ES/DME4io-ES. The abbreviation “DME Satellite” refers to the DME8i-C/DME8o-C/

DME4io-C/DME8i-ES/DME8o-ES/DME4io-ES.

Your DME, SP2060, ICP1 and the DME Designer software, let you build a custom audio system

installation that can support an incredible variety of conditions. You can build an entire system from

input to output with the DME Designer software, then send the system data to the DME and SP2060

which become independent processors.

An amazing variety of applications are possible, including audio installations, sub-mixing, speaker

system control, matrix/routing, and multi-effect processing.

SPECIAL NOTICES

• The software and this Owner’s Manual are the exclusive copyrights of Yamaha Corporation.

• Use of the software and this manual is governed by the license agreement which the purchaser

fully agrees to upon breaking the seal of the software packaging. (Please read carefully the

Software Licensing Agreement at the end of “About the included CD-ROM” before installing the

application.)

• Copying of the software or reproduction of this manual in whole or in part by any means is

expressly forbidden without the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and the

software.

• This disc is a CD-ROM. Do not attempt to play the disc on an audio CD player. Doing so may

result in irreparable damage to your audio CD player.

• The company names and product names in this Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may

appear somewhat different from the screens which appear on your computer.

• Future upgrades of application and system software and any changes in speciﬁcations and

functions will be announced separately.

• Windows

®

is the registered trademark of Microsoft

®

Corporation.

NOTE

Here the abbreviation “DME” does not include the “DME32.”

NOTE

This manual is based on the English version of operating system. Illustrations, command names, window names, and similar

information are from that version. Some items may differ from what you see on the computer screen, depending on which

operating system you are using.

Getting Started

DME Designer Owner’s Manual

3

The DME Audio System Network

In an audio system including one or more DME units and/or SP2060 units, the “control space” is

logically organized using the concepts of “Area”, “Zone”, and “Device Group”. The space covered by

the entire system is the “Area”, while independent sonic spaces within that Area are called “Zone” A

group of DME or SP2060 units assigned to the same function are considered a “Device Group”.

An Area is comprised of one or more Zones, and each Zone can include up to 32 Device Groups.

A single Device Group can include as many as 16 devices. Each Device Group has one “Group

Master”.

NOTE

Meter response may deteriorate as the number of meters displayed in a single device group in DME Designer increases. In

such cases meter response can be improved by dividing the device group.

See “Changing Device Groups” on page 279.

NOTE

DME and SP2060 units cannot be combined in the same Device Group.

NOTE

All devices in a Device Group must be on the same subnet.

Area

Zone1

Zone2

Zone1

Device Group1

Device Group2

Device Group1

Device1

(Group Master)

Device2

(Slave)

Getting Started

DME Designer Owner’s Manual

4

The DME Designer Software Application

The DME Designer software application provides a convenient, central interface for the creation and

control of DME-based audio systems.

By connecting the computer on which the DME Designer application is running to a Group Master it

becomes possible to control multiple devices simultaneously.

With DME Designer, DME audio systems can be designed and conﬁgured via a comprehensive block-

diagram interface on the computer screen.

The main concepts used in the creation of DME audio systems are “Components”, “Conﬁgurations”,

“Preset Parameters”, and “Scenes”.

■ Components

Any independent signal-processing block, such as an equalizer, compressor,

input/output module, or external device control object is a “Component”.

■ Conﬁgurations

A “Conﬁguration” is group of components, including their placement and interconnections.

Getting Started

DME Designer Owner’s Manual

5

■ Preset Parameters

The set of parameters for all components in a Conﬁguration is know as the Conﬁguration's “Preset

Parameters”.

■ Scenes

A Conﬁguration and its Preset Parameters are a “Scene”.

DME settings as well as Conﬁguration and Preset Parameter settings are sent from the DME Designer

application running on the computer to the Device Master via USB or Ethernet, allowing each device

to function as a separate processor, independently from the computer. It is also possible to keep the

DME Designer application on line and control the devices in real time.

It is possible to use the DME Designer to create Conﬁgurations that include multiple devices when the

appropriate devices are connected.

Although it is possible to have multiple Zones in an Area, multiple Device Groups in a Zone, and

multiple Scenes and Conﬁgurations in a Device Group, only one Area, Zone, Device Group and

Conﬁguration can be active and editable via the DME Designer at any one time. The active elements

are known as the Current Zone, Current Device Group, Current Scene, and Current Conﬁguration.

Scenes1

Scenes2

Scene

s

999

MATRIX MIXER PARAMETRIC EQ

PARAMETRIC EQ

DELAY DELAYCROSSOVER

2WAY

COMP/LIMITER

PARAMETRIC EQ

DELAY CROSSOVER

2WAY

COMP/LIMITER

COMP/LIMITER GATE

PARAMETRIC EQ

DELAY COMP/LIMITER GATE

PARAMETRIC EQ

DELAY COMP/LIMITER GATE

PARAMETRIC EQ

DELAY COMP/LIMITER GATE

16 x 8

8 BAND

= Components

Æ GATE

• Attack

• Decay

• Range

• Threshold

• Key in

• Hold

Scenes

Composition of scene

Preset

Parameters

Configurations

Getting Started

DME Designer Owner’s Manual

6

Data Handled by a DME Audio System

■ DME Data Structure

* Some settings not included.

Common Overall Data

Scene Link Settings Settings required for linked scene operation between multiple

groups.

Data for Each Device Group

User Deﬁned Button Settings Settings required for component parameter control from the

DME64N/DME24N or ICP1 panel.

Up to 24 parameters can be registered for control.

Global Parameter Link Settings Settings required for linked operation of the same types of

parameters between multiple devices.

Data Used by the Scene Manager

MIDI program Change Settings Settings required to allow scene selection via MIDI commands.

Scenes The information required to switch audio data processing

setups.

Scenes include conﬁgurations and preset data.

The Scene Manager facilitates registration and management of

scene data.

Up to 999 scenes can be registered, and registered scenes are

managed by their scene numbers.

Data for Each Device

Conﬁgurations A combination of the audio signal processing, audio input/

output, and external device control components and their

interconnections, created to create the desired audio system.

Local Parameter Link

Settings

Settings that allow linked operation between similar types of

internal DME parameters.

Component Link

Settings

Settings that allow linked operation between similar types of

internal DME components.

External Device

Settings

Settings required to allow control of component parameters from

external devices.

Independent settings are required for each device.

The external devices that can be used are as follows:

• MIDI Controller (MIDI Control Change, Parameter Change).

• GPI Controller.

• DAW Controller.

• AMX, Crestron, and other remote controllers.

• PM5D or other compatible mixing console (controlling DME

internal head amp)

Preset Parameters The settings for the components in a conﬁguration.

Audio processing setups can be switched by changing the

preset parameters.

Components included in the preset parameter set are as

follows:

• GEQ, MatrixMixer, and other audio signal processing

components.

• Internal AD/DA (DME24N), Cascade (DME64N), and MY card

I/O components*.

• Components for external devices such as the AD8HR and

AD824 remote head ampliﬁers.

Getting Started

DME Designer Owner’s Manual

7

■ SP2060 Data Structure

Common Overall Data

Scene Link Settings Settings required for linked scene operation between multiple devices.

Data for Each Device

Scenes The information required to switch audio data processing setups.

Scenes include conﬁgurations and preset data, The last Library name recalled is

speciﬁed.

The Scene Manager facilitates registration and management of scene data.

Up to 99 scenes can be registered for 12 preset areas and 87 user areas, and reg-

istered scenes are managed by their scene numbers.

Conﬁgurations A combination of the audio signal processing, audio input/output, and external

device control components and their interconnections, created to create the

desired audio system.

Local Parameter Link

Settings

Settings that allow linked operation between similar types of internal SP2060

parameters.

Preset Parameters The settings for the components in a conﬁguration.

Audio processing setups can be switched by changing the preset parameters.

Preset parameters can be recalled by SP2060 units, but not edited.

Data for Each Component

Library Settings speciﬁc to the speakers to be used.

In addition to the preset data provided, settings can be created by the DME

Designer.

Getting Started

DME Designer Owner’s Manual

8

One DME unit/Device Group

No.

001

002

003

004

005

006

....

Confuguration

Output Processor for Dome

...

Scene Name

All On

Opening

Band Set 1

Band Set 2

Band Set 3

...

Preset Parameters

All On

BGM & MC

Band 1

Band 2

Band 3

Microphone

Mixer

External Head Amp

etc...

Power Amp

Processor

etc...

Input

External Device (MIDI, GPI, DAW, AMX/Crestron, controlling DME internal head amp)

Audio signal

Notes

Device Group

Output

Control signal

Data explanation

Setting preset parameters

LCD Display

Dome Low

Dome Mid

Dome Hi

....

Assigned Parameter

Crossover: Output Low: Level

Crossover: Output Mid: Level

Crossover: Output Hight: Level

(No Assign)

User Defined Button Scene Manager

Specifies the parameter to be changed.

Specifies the configuration

and preset parameters combination.

Configuration

Output Processor for Dome

Local parameter link settings

External device settings

MY8-AE

(Input)

MY8-AE

(Output)

Cross-

Over

EQ

Delay EQ Dyn

Delay

All On Component value

BGM & MC

Band 1

Band 2

Band 3

Preset parameters for output processor

Set the value

Two DME units/Device Group (When one DME unit doesn’t provide sufficient processing power, up to 16 DME units can be used)

DME#2

Configuration

Output Processor

for Hall

Local parameter link settings

External device settings

All On

BGM & MC

Band

Device Group

LCD Display

Dome Low

Dome Mid

Dome Hi

Hall Low

Hall Mid

Hall Hi

....

Assigned Parameter

#1: Crossover: Output Low: Level

#1: Crossover: Output Mid: Level

#1

:

Crossover

:

Output Hight

:

Level

#2: Crossover: Output Low: Level

#2: Crossover: Output Mid: Level

#2

:

Crossover

:

Output Hight

:

Level

No.

001

002

003

004

005

006

....

Configuration

Output Processor for Dome

...

Scene Name

All On

Opening

Band Set 1

Band Set 2

Band Set 3

...

Preset parameters

All On

BGM & MC

Band 1

Band 2

Band 3

Configuration

Output Processor for Hall

...

Preset parameters

All On

BGM & MC

Band

User Defined Button

Scene Manager

DME#1

Configuration

Output Processor

for Dome

Local parameter link settings

External device settings

All On

BGM & MC

Band 1

Band 2

Band 3

Preset parameters Preset parameters

External Device (MIDI, GPI, DAW, AMX/Crestron, controlling DME internal head amp)

Microphone

Mixer

External Head Amp

etc...

Power Amp

Processor

etc...

Input Output

DME#1

DME#2

For DME#2

For DME#1

Specifies the parameter to be linked between DME units.

Grobal Parameter Link

For DME#1 For DME#2

Audio signal

Notes

Control signal

Data explanation

Setting preset parameters

Selects the parameter to be

edited from two DME units.

Specifies the configuration and preset

data combination in each DME

Getting Started

DME Designer Owner’s Manual

9

System Requirement

NOTE

Separate SP2060 units normally handle scenes independently, but the Scene Link function can be set from the DME

Designer to allow linked scene operation.See “Scene Link Manager” on page 145.

Operating System Windows

®

XP Professional/XP Home Edition/2000 Professional

CPU 1 GHz or better Intel

®

Core™/Pentium

®

/Celeron

®

family processor

Memory 256 MB or more

Hard Disk Capacity 300 MB or more

Display 1,280 x 1,024 pixels or better/High Color 16 bit or better

Other Mouse, CD-ROM drive, 100Base-TX/10Base-T Ethernet or USB connection

environment.

Operating System Windows

®

Vista Ultimate/Business/Enterprise

CPU 1.4 GHz or better Intel

®

Core™/Pentium

®

/Celeron

®

family processor

Memory 1 GB or more

Hard Disk Capacity 300 MB or more

Display 1,280 x 1,024 pixels or better/High Color 16 bit or better

Other Mouse, CD-ROM drive, 100Base-TX/10Base-T Ethernet or USB connection

environment.

Getting Started

DME Designer Owner’s Manual

10

Main Changes from V1.0 to V1.1

■ Main Panel Window

• Instead of the former Parameter Link function, there are now two functions: a Global Link function

that links parameters within all DMEs in a zone and a Local Link function that links parameters

within a single DME unit. (page 89)

• The Synchronization function can now not only send data from DME Designer to the DME unit,

but can also synchronize by reading data from the DME unit. (page 91)

• Scene Increment/Decrement and Time Adjustment can now be assigned in the GPI input

function. (page 108)

• DME unit events can now be recorded by the Event Logger function and displayed in the Event

Logger window. (page 168)

• The time for executing an event can now be set by using the Event Scheduler function.

(page 133)

• Parameters in the current conﬁguration can now be listed on the display and printed out by using

the Parameter List function. (page 138)

• The Wav File Manager can manage Wave ﬁles played by the Wav File Player. (page 145)

• Settings can be made by the DAW Control function that are used for controlling DMEs from a

DAW controller. (page 151)

• DME unit data can now be saved as a backup ﬁle by using the Backup function. (page 151)

■ Designer Window

• The port name display can now be switched between long name display and short name display.

(page 194)

• DME64N cascade connections can now be set. (page 209)

• Priority items can now be set when compiling conﬁgurations by using the [Compile Priority]

function in the “Preferences” dialog box. (page 208)

• Delay time can now be displayed for each component by using the Show Signal Delay function.

(page 291)

• Monitoring points can now be edited by using the “Monitoring Point List” dialog box. (page 292)

• The status of connections in a conﬁguration can now be analyzed in advance by using the

Analyze function, without connecting the DME unit. (page 294)

•You can now set the action that occurs when you double-click a user module object. You can also

turn user module security ON or OFF, and set a password. (page 295)

• Libraries with component parameters saved in them can now be recalled from the context menu

for a component object. (page 352)

•A new rule for wiring prohibits connections to terminals that would short the terminator.

■ Component Editor/Component

•A status bar has been added to the component editor. It displays the component name,

component ID, and parameter IDs for parameters that are being edited. (page 306)

•A Snap function has been added that records parameters in the editor temporarily. Parameter

sets can then be switched by using the Snap buttons. (page 348)

• The meter's peak hold function can now be turned ON or OFF. (page 345)

•A Wav File Player component has been added for playing Wave ﬁles. (page 413)

• An effect component called SPX has been added that supports many different effect

applications, such as reverb, delay, and modulation effects, along with complex combinations of

multiple effects. (page 454)

•A Slot Out component editor has been added. (page 466)

• An Undo/Redo function is now available when using the design mode. It can undo the most

recent operation (control movement/resize/deletion).

Getting Started

DME Designer Owner’s Manual

11

Changes from V1.1 to V1.2

■ Main Panel Window

• The synchronization algorithm has been reﬁned for faster synchronization.

• Synchronization now can be executed from DME to DME Designer without any break in the

sound.

• In the following cases, synchronization can be executed from DME Designer to DME without any

break in the sound:

The second or later synchronization after starting DME Designer* and when differences in data

between the DME and DME Designer are limited to parameters within components, AD824/

AD8HR/DME24N AD/DA setting data, or MY card setting parameters.

* If the ﬁle was saved when DME Designer was closed, there will be no break in sound even in the ﬁrst

synchronization after saving.

• Compile speed has been increased.

Up to three times faster when AutoDelayCompensation is turned On.

Up to two times faster when AutoDelayCompensation is turned Off.

• Synchronization is possible when no MY card or a different MY card is installed in the DME unit

(a conﬁrmation dialog will appear).

• An option to automatically close the dialog after synchronization has been added. (page 50)

•A progress bar has been added to the Synchronization dialog. (page 49)

•A message appears to warn when synchronization will cause muting.

• The following operations can be performed while on line:

- Scene storage.

- Scene name changes.

- Fade ON/OFF and Fade Mode changes.

- Fade time changes.

- Parameter link setting changes.

• When a scene store is executed, that scene becomes the current scene.

•Wave ﬁles can be saved as DME data ﬁles, and are included in import/export operations.

(page 41)

•Wave ﬁles can be saved in the Wav ﬁle library.

• Event Log events can be output via GPI. (page 76)

• The on-line indicator appears as a button which can be used to switch between on-line and

off-line. (page 57)

• Scene edits cause the EDIT indicator to appear. (page 55)

• An auto ﬁle save function (Auto Save, post synchronization) has been added. (page 70)

• Different zones can be speciﬁed for use by different users. (page 152)

• Scene parameters related to User Deﬁned Button, Program Change, GPI In and GPI Out can be

set via the Scene Manager. (page 79)

• [Select All] and [Clear All] buttons have been added to the Scene Manager Recall Safe dialog.

(page 83)

• User Control can be created for individual users as well as security levels. (page 86)

•A Remote Control Setup List has been added. (page 133)

This list can be used to make detailed settings for a new software protocol that allow the DME to

be controlled from AMX, Crestron, and similar devices.

Refer to the “DME-N Remote Control Protocol Speciﬁcations” document for details about the

communication protocol. Information about the “DME-N Remote Control Protocol Speciﬁcations”

document can be found at the Yamaha pro Audio website (URL below).

http://www

.yamahaproaudio.com/

• It is possible to specify whether listed events will be executed by the Event Scheduler.

(page 133)

Getting Started

DME Designer Owner’s Manual

12

• The order of same-time events can be changed in the Event Scheduler. (page 133)

• Exceptions can be speciﬁed for Event Scheduler execution day/time. (page 101)

• Event Scheduler execution times can be speciﬁed in 1-second increments. (page 100)

• Head amp gain and MY-Card can be set via GPI, MIDI, User deﬁned Button, DAW Control.

• Parameter values, scene recall, GPI output, Wave ﬁle playback, and head amp gain can be set

via the User Deﬁned Buttons. (page 126)

• The Component Lock function dialog is separate from the Parameter List dialog. (page 144)

• Shortcuts can be freely set as required. (page 150)

• Files can be saved in the DME unit. (page 68)

•A [Close All Editor Windows] button has been added to the Window menu. (page 67)

• External head amp parameters will be recognized by the DME unit when either the DME or the

external head amp (AD824, AD8HR) are turned on. Execute a scene recall to send DME settings

an external head amp.

• This manual is now separate from the DME Designer installer, and can not be accessed from the

DME Designer menus.

■ Designer Window

• The following operations can be carried out via the shortcut keys.

- Navigator

- Activate Navigator

- Activate Toolkit

- Activate Design Window

- Select Left Port and Start Wiring

- Select Right Port and Start Wiring

- Wire Auto Single to Right

- Wire Auto Multi to Right

- Wire Auto Single to Left

- Wire Auto Multi to Left

- Delete Wire

• It is now possible to simultaneously edit multiple objects of the same type.

Example: Change the thickness or color of multiple wires at once.

• Files related to user modules (user module ﬁles, library ﬁles, user module editor ﬁles) can be

combined and exported/imported as a single ﬁle.

• Port colors can be independently speciﬁed for each port type. (page 198)

• Default wire thicknesses and types can be independently speciﬁed for each port type.

• An automatic hot-spot connection function has been added. (page 271)

• Port display has been added to External Device, Picture, DME, and ICP1 objects.

• When drawing wires the keyboard cursor keys can be used to move the mouse cursor, and the

<Enter> key can be used to create nodes.

• When drawing wires <Shift> key plus <→> key and <Shift> key plus <←> key combinations can

be used to automatically connect horizontally-aligned hot spots.

• DME object ports can be freely speciﬁed.

• Compilation of conﬁgurations with loop connections is possible when Auto Delay Compensation

is On.

• The name has been changed from “Foot Monitor” external device to “Floor Monitor.”

• Addition External Device types have been provided.

• External Devices can be double-clicked to open a ﬁle saved by other applications. (page 220)

• Picture objects can be double-clicked to open a speciﬁed editor. (page 236)

•Text objects can be double-clicked to open a speciﬁed editor. (page 239)

Getting Started

DME Designer Owner’s Manual

13

• User module port labels can be edited. (page 233)

• Graphics can be placed to represent user modules. (page 232)

• The Legend ﬁeld automatically resizes to accommodate project names and titles of different

lengths.

•A Generic “MY-Others” setting has been provided to accommodate third-party MY cards.

■ Component Editor Window

• Undo and Redo are now shortcut compatible.

•A scroll bar appears when the size of the component editor window is reduced.

• The size and position of the component editor window are memorized.

• An option to allow mouse-over zooming of the edit box has been added. (page 309)

•A [Back] button that allows switching between related parent and child windows has been

added. (page 306)

•A [Close All Editor Windows] button has been added to the contextual menu.

• Source Selector, Speaker Processor, Limiter, Slot In, Cascade In, and Cascade Out components

have been added.

• The Delay algorithm has been revised. (page 385)

- LEVEL and MUTE are effective when Delay is Off for each channel.

- The name of the overall Delay [On] parameter has been changed to [All Bypass].

• The bus send level range for Delay, Matrix, and Matrix Mixer components has been changed to

-∞ through 0.0 dB.

• Snap copy is possible. (page 349)

• Snap can be retained until the application is quit or another ﬁle is opened.

• Security status is displayed in the user module editor status bar.

• Multiple controllers can be selected by clicking while holding the <Ctrl> key when the editor is in

the design mode. (page 344)

• [Picture], [Text], [Box], [Ellipse], and [Frame] have been added to the tool palette of the user

module editor and user control editor design mode. (page 311)

• Controller properties can be accessed by double-clicking controllers in the user module editor or

user control editor design mode. (page 330)

• Picture and Text objects can be clicked to open a speciﬁed editor in the user module editor or

user control editor.

• The User Module Editor and User Control Editor offer a greater range of customization options for

color, size. etc., of the placed controls.

■ MIDI Setup

•A MIDI Setup minimize function has been added.

■ V1.2 Precautions

• When using project ﬁles (*.daf) created by version 1.1.5 or earlier, synchronize from the DME

Designer to the DME unit for the ﬁrst synchronization.

•Project ﬁles (*.daf) created using version 1.2 will not open properly on version 1.1.

IN

Input

Mute

Input

Level

Input

Mute

Input

Level

On

Delay On

Delay All Bypass

OUT

Mute Level

On Mute Level

IN

Delay

Getting Started

DME Designer Owner’s Manual

14

Changes from V1.2 to V2.0

■ General

• Support added for DME8i-C/DME8o-C/DME4io-C, SP2060 units and MY16-CII.

• “Device Groups”, or groups of the same type of device, have been added at the lowest Zone

level.

• It is now possible to have one master device per device group rather than one master device per

zone. This means that it is possible to have multiple master devices in a single zone.

•Group masters can now be assigned regardless of the IP address. This makes it possible to have

multiple device groups at a single network address.

• Conﬁgurations can be created and deleted for each device group.

■ Component

•A Feedback Suppressor component has been added. (page 402)

• The Speaker Processor component PEQ “Q” parameter now goes to “63”. (page 447)

■ Main Panel Window

• Firmware and component data can now be updated simultaneously. (page 175)

•A Recovery Update function that allows recovery from program corruption has been added.

(page 177)

•A Component Link function that allows simultaneous linking of all component parameters has

been added. (page 89)

• Scene Link function that allows simultaneous control of multiple devices in different device

groups has been added. (page 145)

•A Protect function has been added to the scene manager. (page 79)

• Card settings are no longer included in scene data.

•A Utility window has been added to allow editing of device utility settings. (page 161)

• The Local Parameter Link display order has been changed. (page 89)

• Parameter Link operation can now be turned on or off for each device group. (page 89)

• Compilation and analysis is now possible even if no connections have been made.

• Navigator window hide/show can now be selected from the main window.

• The Event Logger can now display only the event data for a speciﬁed device. (page 72)

• The GPI terminal names have been changed from [CH] to [PORT].

■ Designer Window

•A hand tool for window movement has been added. The hand tool can be selected via the hand/

arrow icon in the toolbar, or from the [Tools] menu. The hand tool can also be temporarily

selected by holding the spacebar on your keyboard.

• Window magniﬁcation and reduction can now be controlled via the mouse wheel while holding

the keyboard “Ctrl” key.

• Horizontal scrolling can be controlled via the mouse wheel while holding the keyboard “Shift” key.

• The Edit Mode on/off can now be changed from the tool bar. (page 180)

• Scene information now appears in DME objects, and the Scene Manager can be launched from

the scene information display. (page 79)

• An [On-line] button has been added to DME objects, and synchronization is now possible.

(page 57)

• Sampling frequency display has been added to the resource meter window. (page 184)

Getting Started

DME Designer Owner’s Manual

15

• Sampling frequency display has been added to the conﬁguration window status bar. (page 287)

• The sampling frequency is now displayed during analysis.

• Double-clicking the component name now opens the properties window.

• Organization of the Tool Kit window has been changed. (page 186)

•A [Draw Image] checkbox that displays or hides the worksheet background image ﬁle has been

added to the Sheet properties. (page 201)

• [Conﬁguration Manager] has been added to the contextual menu that appears when a DME or

SP2060 object is right-clicked. (page 205,page 213)

• [Recall Component Library] and [Store Component Library] now appear in the contextual menu

that appears when a component is right-clicked, even when the Edit Mode is OFF.

• The Compile Settings can now be edited for each DME unit. (page 208)

• Only one Zone window is now provided for multiple conﬁgurations.

• The [Export DXF] and [Preferences] commands have been moved from the [Print] menu to the

[Tools] menu.

• [Conﬁguration] has been changed to [Conﬁguration Manager] in the [Tools] menu.

• When [Prohibit Diagonal Connections] in the [Tools] menu is active it is possible to select 2

diagonal points and those points will automatically be connected by a combination of horizontal

and vertical wires.

■ Component Editor Window

•A [Level Meter Enable] command that displays or hides the meter values has been added to the

contextual menu. Hiding the meters can result in increased communication speed in some

cases. (page 346)

•A [Display Order] function that allows the order of the controllers to be changed as required has

been added to the User Control Editor and User Module Editor. (page 311)

• An [Add Component to Component Link] command has been added to the controller contextual

menu.(page 356)

• The registered group is now displayed in the [Add Parameter to Parameter Link] submenu of the

contextual menu of controllers registered for Parameter Link operation.(page 354)

• Increased speed when selecting and dragging a large number of controllers in the User Control

Editor and User Module Editor

• It is now possible to switch from the Navigator window to Zone display while online.

■ V2.0 Precautions

Please use DME Designer V2.0 with DME64N/24N V2.0 or higher, DME8i-C/DME8o-C/DME4io-C

V2.0 or higher, and SP2060 V1.1 or higher.

See the Yamaha Pro Audio website for compatibility details (http://www.yamahaproaudio.com/).

When DME64N/24N and DME8i-C/DME8o-C/DME4io-C are used together in the same device

group, faster communication speed as well as smoother DME Designer meter display can be

obtained by assigning a DME8i-C/DME8o-C/DME4io-C unit as the device group master.

Getting Started

DME Designer Owner’s Manual

16

Changes from V2.0 to V3.0

■ General

• DME8i-ES/DME8o-ES/DME4io-ES support.

• The DME Designer and DME-N Network Driver installers have been combined, so the

appropriate DME-N Network Driver version is now installed automatically with the DME Designer

application.

• The following connections to the Slave DME units are now possible when a DME Satellite unit is

assigned as the Device Group Master:

- USB/Ethernet connection to the computer (DME Designer).

- Cascade connection to control from the PM5D console (DME64N only).

■ Component

• Ambient Noise Compensator component added (page 365).

• Audio Detector component added (page 367).

• Auto Gain Control component added (page 368).

• Auto Mixer II component added (page 414).

• Simple Mixer component added (page 433).

• Room Combiner component added (page 443).

• Matrix Mixer and Router component variations added.

■ Main Panel Window

•To allow project information to be easily reproduced on a different computer, it is now possible to

export and import all necessary ﬁles at once, rather than only project ﬁles with the “.daf”

extension (page 42).

•A Device Information window that lists the status of all devices has been added (page 178).

• It is now possible to individually set each user control to determine whether it will open

automatically when the project ﬁle is opened (page 86).

• In accordance with the above change, the Startup User Control item has been removed from the

Security dialog box.

• It is now possible to assign Direct Parameter Value to the GPI input function, and assign Direct

Parameter Value and Audio Detector to the GPI output function (page 106, page 116).

• An option that automatically saves the project ﬁle (.daf extension) in the DME unit when going

online has been added (page 92).

• It is now possible to control internal DME-24N/DME8i-C/DME4io-C/DME8i-ES/DME4io-ES head

amps from a PM5D or other compatible mixing console (page 135).

• Remote control from AMX, Crestron, and similar controllers is now possible via Ethernet

connection only for DME Satellite units. (page 165).

• The display format of the parameter values displayed in the Remote Control Setup List and

Parameter List dialog box can now be switched between the internal settings and the values

displayed in the editor windows (page 133, page 141).

• The Event Logger window can now display additional error messages shown on the DME display

panel (page 77).

• It is now possible to set the DME unit so that the internally stored event log is not erased

(page 74).

• Improvements have been made to the additional error message information shown in the Event

Logger window.

• The DME unit internal clock and DME Designer time display now support daylight saving time

(DST) (page 171).

• Firmware updates can now be applied to entire device groups, for improved speed and

efﬁciency.

Getting Started

DME Designer Owner’s Manual

17

■ Designer Window

• It is now possible to set a “clear” background color for text, box, and ellipse objects (page 239,

page 241, page 243).

• Password entry is now required when opening a User Module Properties dialog box or saving/

exporting in a user module to which security has been applied.

• Linked software applications can now be launched from the Slot component contextual menu

(page 227).

• User module templates that use the same library are now categorized and displayed as user

module groups (page 296).

• Image ﬁles are now included in User Module exports.

• Component and parameter links can now be copied when DME objects, components, and user

modules are copied/pasted or duplicated.

• Parameter links are now saved when User Module data is saved/exported.

• When already-placed picture ﬁles are replaced, they will be updated and displayed correctly

without the need to restart the DME Designer application.

■ Component Editor Window

• [Line] and [Scene Recall] tools have been added to the User Module Editor and User Control

Editor design modes, allowing placement of lines and scene recall buttons (page 318).

• In the User Module Editor and User Control Editor it is now possible to convert placed sliders to

knobs, and vice-versa (page 329).

• More options are available for customizing the controls listed below in the User Module Editor

and User Control Editor:

- A property dialog box has been added for sliders, allowing customization of direction, scale,

color, size, and other parameters (page 331).

- Level meter size can be customized (page 333).

- A property dialog box has been added for slider level meters, allowing customization of

direction and size (page 334).

- Knob color and knob background color can be customized (page 330).

- Text background color can be customized (page 338).

- A property dialog box has been added for indicators, allowing customization of color and size

(page 334).

■ V3.0 Precautions

Use DME Designer V3.0 only with DME64N/24N V3.0 or higher, DME Satellite V3.0 or higher, and/or

SP2060 V1.2 or higher. Refer to the Yamaha Pro Audio website (http://www.yamahaproaudio.com/)

details on combinations.

When combining DME64N/24N and DME Satellite units in a device group, be sure to assign a DME

Satellite unit as the device group master. Synchronization cannot be performed if a DME64N/24N is

assigned as the device group master.

When using the Windows Vista operating system, use only USB-MIDI Driver V3.0 or higher, and

DME-N Network Driver V1.2 or higher.

DME Designer Owner’s Manual

18

Contents

The DME Audio System Network .............................................. 3

The DME Designer Software Application .................................. 4

Data Handled by a DME Audio System..................................... 6

Chapter 1 Before Using 20

Installing DME Designer .......................................................... 20

Starting DME Designer............................................................ 20

Closing DME Designer ............................................................ 22

Chapter 2 DME Designer Overview 23

Names and Functions of the Windows .................................... 23

Users and Security .................................................................. 28

Files Used by the DME DESIGNER ........................................ 31

Configuration Creation Procedure ........................................... 46

Online ...................................................................................... 47

Chapter 3 Main Panel Window 52

Names and Functions of the Windows .................................... 52

Main Panel Window Menu....................................................... 58

DME File Storage .................................................................... 68

Preferences ............................................................................. 69

Event Logger ........................................................................... 72

Scene Manager ....................................................................... 79

User Control ............................................................................ 86

Parameter Link ........................................................................ 89

Synchronization (DME Designer and Unit Synchronization) ... 91

Event Scheduler ...................................................................... 95

Wav File Manager ................................................................. 102

GPI ........................................................................................ 106

MIDI....................................................................................... 119

User Defined Button (User Defined Parameters) .................. 126

DAW Control.......................................................................... 130

Remote Control Setup List .................................................... 133

Internal HA Control ................................................................ 135

Parameter List ....................................................................... 141

Component Lock ................................................................... 144

Scene Link Manager.............................................................. 145

SP2060 Library Manager....................................................... 147

MIDI Port Setup ..................................................................... 149

Shortcut Keys ........................................................................ 150

Security (Creating Users and Making User Settings) ............ 151

Network Setup ....................................................................... 159

Utility...................................................................................... 161

Word Clock ............................................................................ 168

Monitor Out............................................................................ 170

Clock...................................................................................... 171

Language Settings................................................................. 173

Backup................................................................................... 174

DME Firmware Update .......................................................... 175

Device Information................................................................. 178

Chapter 4 Designer 180

Editing Configurations ........................................................... 180

Designer Window .................................................................. 181

Toolkit Window ...................................................................... 186

Designer Window Menu ........................................................ 191

Objects .................................................................................. 198

Design Window Shared Settings and Operations ................. 255

Drawing and Editing Wires .................................................... 266

Adding, Deleting, and Renaming a Zone............................... 277

Changing Device Groups ...................................................... 279

Adding, Deleting, and Renaming a Configuration ................. 281

Area Window ......................................................................... 283

Zone Window......................................................................... 284

Configuration Window ........................................................... 287

User Module .......................................................................... 295

Chapter 5 Editor Window 305

Component Editor Window.................................................... 305

User Control Editor/User Module Editor ................................ 311

Operation Mode and Design Mode........................................ 344

Context Menu ........................................................................ 345

Snap ...................................................................................... 348

Library.................................................................................... 350

Creating Parameter Links...................................................... 354

Creating Component Links .................................................... 356

Chapter 6 Component Guide 357

Types of Components ........................................................... 357

Ambient Noise Compensator................................................. 365

Audio Detector....................................................................... 367

Auto Gain Control .................................................................. 368

Crossover .............................................................................. 369

Crossover Processor ............................................................. 373

Delay ..................................................................................... 385

Dynamics............................................................................... 387

Equalizer (EQ) ....................................................................... 397

Fader ..................................................................................... 401

Feedback Suppressor ........................................................... 402

Filters..................................................................................... 403

Meter ..................................................................................... 411

Miscellaneous........................................................................ 412

Mixer...................................................................................... 414

Pan ........................................................................................ 436

Room Combiner .................................................................... 443

Router.................................................................................... 444

Source Selector ..................................................................... 446

Speaker Processor ................................................................ 447

SPX ....................................................................................... 454

Slot ........................................................................................ 465

Cascade ................................................................................ 467

Analog Input and Output........................................................ 469

SP2060 Input and Output ...................................................... 470

CobraNet Input and Output ................................................... 471

EtherSound Input and Output................................................ 473

MY-Card ................................................................................ 474

Remote Controlled Head Amp............................................... 478

Component Glossary............................................................. 480

Getting Started

DME Designer Owner’s Manual

19

Appendix 484

Options .................................................................................. 484

Main Display .......................................................................... 486

Parameter Edit Displays ........................................................ 487

Utility Displays ....................................................................... 491

Troubleshooting 496

Index 497

DME Designer Owner’s Manual

20

Chapter 1 Before Using

Installing DME Designer

To use DME Designer, you must ﬁrst install the software on the computer. Before you can connect the

DME Designer software to the DME or SP2060 unit, you must ﬁrst install the USB MIDI Driver or the

DME-N Network Driver, according to how you will be connecting, and then make the appropriate

settings.

For instructions about the installation and setup for the DME Designer and DME-N Network Driver, and

about the installation for the USB-MIDI Driver, see the “DME Setup Manual.”

Starting DME Designer

The DME Designer software is started from the [Start] menu. DME Designer is used with one user

logged on. The user logs on when the software is started.

■ DME Designer Start Up and Logon (When Auto-Logon Is Not Set)

1 Click [Start] ➞ [All Programs] ➞ [YAMAHA OPT Tools] ➞ [DME Designer] ➞ [DME

Designer].

The “Log On” dialog box will be displayed.

NOTE

Initial settings for DME Satellite units must be transferred via USB-MIDI, so it is necessary to properly install the USB-MIDI

Driver.

NOTE

In Windows2000, click [Start] → [Programs] → [YAMAHA OPT Tools] → [DME Designer] → [DME Designer].

NOTE

Automatic log-on is the default setting. If the automatic logon feature is enabled, the “Log On” dialog box will not be

displayed when the application is started. Instead, the auto-logon user will be logged on automatically. See page 30

for information about auto-logon.

Страница загружается ...

Yamaha V3 Инструкция по применению

Yamaha V3 Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов