LG HBS-FN6 Руководство пользователя

Rev 2.0 RU

HBS-FN6 / HBS-FN4

www.lg.com

USER MANUAL

Bluetooth® LG Stereo Headset

Google Play App Store

English







032

https://tm.by

Интернет-магазин TM.by

Contact ofce for compliance of this product :

LG Electronics European Shared Service Center B.V.

Krijgsman 1, 1186 DM Amstelveen, The Netherlands

https://tm.by

Интернет-магазин TM.by

ENGLISH

NOTE: For the best performance and to prevent any

damage to, or misuse of the headset, please read all of the

information carefully prior to using the headset.

Any modications or changes to this manual due to

typographical errors or inaccuracies of stated information

shall only be made by LG Electronics Inc.

HBS-FN6 / HBS-FN4

www.lg.com

USER MANUAL

Bluetooth® LG Stereo Headset

https://tm.by

Интернет-магазин TM.by

1

ENGLISH

The LG TONE Free (HBS-FN6 / HBS-FN4) is a lightweight wireless headset that uses Bluetooth

technology.

This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free

Bluetooth Prole.

Safety Cautions

!

CAUTION

Do not disassemble, adjust, or repair the product arbitrarily.

Do not place the product near excessive heat or ammable material.

The product may be damaged if an incompatible charger is used.

Make sure that an infant or child does not swallow a magnet or a small component of the product.

Make sure that foreign objects do not enter the charger’s connectors (charging port and power plug).

Failure to do so may result in re or electric shock.

If you have a medical device implanted, contact your doctor before using this device.

This product has a built-in battery, and the battery cannot be removed or replaced arbitrarily.

For your safety, do not remove the battery incorporated in the product.

If you arbitrarily replace the battery or don’t replace it correctly, it may explode.

The lithium-ion battery is a hazardous component that can cause injury.

Battery replacement by an unqualied professional can cause damage to your device.

Do not discard the battery arbitrarily. Follow the local procedure for discarding batteries.

Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can

result in an explosion.

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of

ammable liquid or gas.

https://tm.by

Интернет-магазин TM.by

2

ENGLISH

!

WARNING

Do not drop the product from a high place.

Make sure there is no water, alcohol, or benzene in contact with the product.

Do not store the product in a wet or dusty place.

Do not place heavy objects on the product.

This product is waterproof to the IPx4 level (daily life waterproof).

(The IPx4 waterproof rating applies to the earbud product only.)

Do not put the product under the water or use it in a humid location such as a bathroom.

!

NOTE

If the product is exposed to excessive sweat, clean the product.

Keep the earbuds clean.

HD Speaker

If the communication network of the device you are connecting to supports HD Voice Calling, you

can enjoy making voice calls and listening to music in high denition.

https://tm.by

Интернет-магазин TM.by

3

ENGLISH

Product Components

LG TONE Free™

Earbuds (medium eargels

installed)

UV Charging Case (this only

applies to HBS-FN6)

Extra Ear Gels

(small & large)

USB Type C™

Charging Cable

Reference Guide

User Manual Warranty Card WEEE Card

(Europe Only)

NOTE: Actual product design may differ from images shown in manual.

Make sure authentic LG Electronics components are used. Using a non-authentic component may

damage the product and thus void the warranty.

Use the USB Type C™ cable provided with the product.

!CAUTION

https://tm.by

Интернет-магазин TM.by

4

ENGLISH

Product Description

Charging Case

Earbuds

*The appearance and specications of the actual product may differ depending on the model.

NOTE: HBS-FN4 does not have a UV-C LED and mood light.

UV-C LED

Pairing / Battery check button

Charging port

Charging terminals

Status indicator lamp

Mood light

(When you open the charging case,

the mood light turns on and off.)

UV-C LED

Speaker mesh

Microphone

Touchpad

Charging terminals

Speaker mesh

https://tm.by

Интернет-магазин TM.by

5

ENGLISH

Pairing and Connecting

Fast Pair

-(

#MVFUPPUI 0/

1 Activate Bluetooth on your phone or device.

2 While the earbud is mounted in the charging case, open the charging case lid and press the

pairing button for 3 to 5 seconds until the blue indicator lamp blinks.

-(

-()#4'/

-(

-()#4'/

#MVFUPPUI

3 When the Fast Pair connection pop-up appears on the top area of the mobile phone screen, tap

it to connect. (It only supports Android™ 6.0 or higher, and requires conguring Bluetooth and

location information settings of the mobile device.)

4 If the pop-up does not appear, select [LG HBS-FN6] from the Bluetooth menu on the mobile

phone and connect it (for users of iOS or Android 5.0 or lower versions).

NOTE: To connect with another device, perform the above procedure again.

CAUTION: In the list of Bluetooth connected devices, LG HBS-FN6_LE is not the correct model

name for connection. Check the model name in use and connect with the model name

without “LE”.

~39 inch, ~1m

https://tm.by

Интернет-магазин TM.by

6

ENGLISH

Automatic Reconnection

The earbuds are connected automatically when you open the cover of the charging case. If you close

the cover of the charging case with both earbuds mounted in the charging case, the earbuds are

disconnected.

How to wear earbuds

2

1

3

Separate the earbuds from the charging case and adjust them so that they t comfortably in your

ears. When you wear the earbuds, you will hear a wearing detection alarm.

NOTE: You can easily separate the earbuds from the charging case by turning the part with dotted line

in Image 1 to left or right and lifting the earbuds.

Indicator Lamp

Status Description

Bluetooth Search Mode The blue status indicator lamp blinks.

Battery below 20% The red status indicator lamp turns on and off.

Battery 20% - 80% The purple status indicator lamp turns on and off.

Battery 80% or more The blue status indicator lamp turns on and off.

When there is a problem while charging The red status indicator lamp blinks.

When the UVnano function is operating The status indicator lamp blinks slowly during the UV-C LED

operation.

https://tm.by

Интернет-магазин TM.by

7

ENGLISH

Mobile Calling Functions

Function Status Description

Answering Calls Ringing Touch the left or right earbud once.

Ending Calls Talking Touch the left or right earbud twice.

Making Calls Idle If you make a call using a mobile phone, the call is automatically

connected to the headset.

Receiving Calls

while on the

Phone

Talking

If you touch the left or right earbud once, the current call will

go on hold, and you will be able to answer an incoming call.

If the previous call is on hold, you can nish the current call on

the mobile phone.

(It works differently depending on the mobile phone settings.)

Rejecting Calls Ringing Touch and hold the left or right earbud.

https://tm.by

Интернет-магазин TM.by

8

ENGLISH

Playing Music

-(

Function Description

Play / Pause : Touch the left or right earbud once.

Adjusting the Volume : Touch the left(Decrease volume) or right(Increase volume)

earbud twice.

Play Next : Touch the left or right earbud three times.

NOTE: On the LG TONE Free app, you can switch the operation mode through the touchpad settings.

Listening to the ambient sound

Touch and hold the left or right earbud to hear the ambient sound.

You can adjust the intensity of the ambient sound in the LG TONE Free app.

The Listen to the Ambient Sound function works only when the product is on hold or playing music.

While using the listen to the ambient sound function, the battery discharges faster than usual.

CAUTION: When the Listen to the Ambient Sound mode is enabled, you may hear the ambient sound

become loud suddenly.

https://tm.by

Интернет-магазин TM.by

9

ENGLISH

Battery Status

If earbuds are mounted in the charging case, the earbuds’ battery status is displayed.

Otherwise, the charging case's battery status is displayed.

If the earbuds are mounted in the charging case while plugged in, the UVnano process will commence

for ten minutes.

Once this process is complete, the charging case's battery status will be displayed.

Indicator Lamp Battery Status

Red Below 20% battery

Violet Between 20% and 80% battery

Blue Above 80% battery

NOTE: When the charging case lid is closed, charging case battery

status is displayed. If the charging case has no remaining charge,

there will be no display and it cannot function. We recommend

you keep the charging case charged at all times as the earbuds

are not able to be turned on and turned off independently.

https://tm.by

Интернет-магазин TM.by

10

ENGLISH

How to charge

Wired Charging

When the charging cable is connected, the charging status is displayed in the charging case.

NOTE: The earbuds and the charging case are charged at the same time.

The charging port on the charging case cannot be used to supply power to mobile phones, etc.

Wireless Charging

Align the bottom center of the charging case with the center of the wireless charger.

NOTE: The wireless charger is not provided. HBS-FN4 does not support wireless charging. The wireless

charging function may not work in some wireless chargers. Wireless charging feature charges at

a slower rate due to less power being transmitted to the charging case.

https://tm.by

Интернет-магазин TM.by

11

ENGLISH

UVnano Description

UV-C LED process operates for ten minutes and begins when

charging case (with earbuds) is plugged in.

UV-C LED does not operate while device is charging wirelessly

such as on a pad or third party wireless charging device (this

only applies to HBS-FN6).

- Independent testing shows the UVnano charging case kills

99.9% of bacteria (Staphylococcus aureus and Escherichia

coli) on the speaker mesh of the earbuds in ten minutes

while charging. The UV-C LED function works only when the

charging case is connected to the power cable.

- For best result, it is recommended that the full 10 minutes of

UV-C LED operation be performed while charging.

NOTE:

The status indicator lamp blinks slowly during the UV-C LED operation.

The light will slowly illuminate on and off until the UV-C LED function is complete (10 minutes).

Once completed, the indicator light will switch back to the always-on battery indicator, see

"Battery Status".

HBS-FN4 does not have a UV-C LED and mood light.

Performance may vary based on usage conditions.

A white product may slightly differ in the color of the UV-C LED contact area, but there is no

problem with the product performance.

UV-C LED does not operate while charging wirelessly.

CAUTION: Be aware that the temperature of the earbuds may rise while the UV-C LED is operating.

Avoid direct eye and skin exposure to UV light.

Keep out of reach of children.

https://tm.by

Интернет-магазин TM.by

12

ENGLISH

Out of Range

If the device connected to the product is out of effective communication range, the communication

signal becomes weak and the communication is lost. The effective communication range may vary

depending on surrounding and other conditions.

If the device comes back within effective communication range, the product automatically reconnects

to the device. If the device is not automatically reconnected, touch the left or right earbud once to

connect them.

LG TONE Free

If you install the “LG TONE Free” app, you can use Check Earbud Battery, Voice Alert, Change Equalizer

Mode, Check Last Connected Location Information, and Find My Earbuds functions. Check out the

app for more details.

To install the “LG TONE Free” app, search LG TONE Free in the Google Play Store or App Store or scan

the QR code below.

It supports Android 5.0 or higher and iOS 11 or higher.

Google Play App Store

https://tm.by

Интернет-магазин TM.by

13

ENGLISH

Troubleshooting

Problem Solution

The power does not turn on Check the battery level and charge it.

If unable to make a call with

earbuds

If the mobile phone does not support headset and hands-free functions,

you cannot use the calling features.

Check the battery level and charge it.

If unable to register

earbuds to mobile

phone

Check whether earbuds are turned on.

Check if the charging case of earbuds are in search mode.

- Press the pairing button on the charging case to switch to search mode.

If you replaced the earbuds

or there is a problem with

the operation

Put the earbuds in the charging case and, with the case open, press the

pairing button for 10 seconds or more.

- The factory reset proceeds while the status indicator on the charging

case ashes red.

Please reconnect the device after factory reset.

https://tm.by

Интернет-магазин TM.by

14

ENGLISH

Specications and Features

Item Comments

Bluetooth Specications V 5.0 (Headset/Hands-Free/A2DP/AVRCP)

Battery Earbud : 3.7 V / 55 mAh, Lithium-ion

Charging case : 3.7 V / 390 mAh, Lithium-ion

Talk Time

(Earbuds / With Charging case) Up to 5 / 15 hours*

Music Play Time

(Earbuds / With Charging case) Up to 6 / 18 hours*

Charging Time

Earbud : within an hour / Charging case : within 2 hours

Fast Charging : 5 min charge for up to 60 min playtime

※ When charging wired at room temperature

Rated Input Voltage Earbud : DC 5 V, 110 mA

Charging case : DC 5 V, 500 mA

Operating Temperature 0°C (+32°F) ~ +35°C (+95°F)

Dimensions (mm) /

Weight (g)

Earbud : 16.1 mm (W) X 32.65 mm (L) X 25.0 mm (H) / 5.4 g (One earbud)

Charging case : 54.5 mm (W) X 54.5 mm (L) X 27.5 mm (H) / 39 g

Frequency range 2402 MHz to 2480 MHz

Output power (Max.) 10 dBm

*Duration of use may vary depending on the connected mobile device, features being used, settings,

signal strength, operating temperature, frequency band, and other methods of use.

Fast charging feature does not apply when charging case is placed on wireless charging device such as a pad.

Wireless charging feature charges at a slower rate due to less power being transmitted to the charging case.

https://tm.by

Интернет-магазин TM.by

15

ENGLISH

Declaration of Conrmation

FCC NOTICE TO USERS :

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

Changes or modications not expressly approved by the manufacturer (or party responsible) for

compliance could void the user’s authority to operate the equipment.

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

https://tm.by

Интернет-магазин TM.by

16

ENGLISH

IMPORTANT NOTE :

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device

is permitted. Any change to the antenna or the device could result in the device exceeding the RF

exposure requirements and void user’s authority to operate the device.

DECLARATION OF CONFORMITY :

Hereby, LG Electronics declares that this headset is in compliance with the essential

requirements and other relevant provisions of Directive 2014/53/EU. A copy of the

Declaration of Conformity can be found at http://www.lg.com/global/declaration

Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.

Android, Google Play, the Google Play logo, and other related marks and logos are trademarks of

Google LLC.

FCC ID: ZNFHBSFN6

Additional Information

1. Radio frequency exposure

This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When in operation, it

communicates with a Bluetooth equipped mobile device by receiving and transmitting radio

frequency (RF) electromagnetic elds (microwaves) in the frequency range 2402 to 2480 MHz.

Your Bluetooth Headset is designed to operate in compliance with the RF exposure guidelines and

limits set by national authorities and international health agencies when used with any compatible

LG Electronics mobile phone.

https://tm.by

Интернет-магазин TM.by

17

ENGLISH

2.

Bluetooth

Connection Precautions

The following environments affect the range and reception of Bluetooth signals:

- When walls, metal, human bodies or other obstacles exist between the Bluetooth device and the

connected device

- When equipment that uses 2.4 GHz frequency signals (Wireless LANs, wireless phones, micro wave

ovens etc.) is placed near the devices being used

- When using a Bluetooth device (TV, laptop, etc.) other than the mobile phone, the sound quality

may be affected by the specications and performance of the device

3. Potentially explosive atmosphere

Turn off your electronic device when in any area with a potentially explosive atmosphere. It is rare,

but your electronic device could generate sparks. Sparks in such areas could cause an explosion or

re resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often,

but not always, clearly marked.

4. Battery information

A rechargeable battery has a long service life if treated properly. A new battery or one that has not

been used for a long period of time could have reduced capacity the rst few times it is used. Do not

expose the battery to extreme temperatures, never above +50° or below -10°. For maximum battery

capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery

capacity will be reduced. The battery can only be charged in temperatures between 0° and +45°.

Removal of waste batteries and accumulators (Product with embedded battery ONLY)

- In case this product contains a battery incorporated within the product which cannot be readily

removed by end-users, LG recommends that only qualied professionals remove the battery, either

for replacement or for recycling at the end of this product’s working life. To prevent damage to

the product, and for their own safety, users should not attempt to remove the battery and should

contact LG Service Helpline, or other independent service providers for advice.

- Removal of the battery will involve dismantling of the product case, disconnection of the electrical

cables/contacts, and careful extraction of the battery cell using specialized tools. If you need the

instructions for qualied professionals on how to remove the battery safely, please visit

http://www.lge.com/global/sustainability/environment/take-back-recycling.

https://tm.by

Интернет-магазин TM.by

Страница загружается...

LG HBS-FN6 Руководство пользователя

Похожие модели бренда

Модели других брендов