LOCATION
USER MEMORY
MUSIC
POWER
PHONES
MEMORY
TIME ADJ
A/B/C/D/E
TIMER
PRESET
BAND
TUNING
HOUR
MIN
AUTO/MAN`L
MIN MAX
DISPLAY
VOLUME
AUX 1 AUX 2
TAPE CD TUNER
Active Servo
Technology
PLAYBACK REC/PLAYBACK
EJECT
TIMER REC MODE DOLBY NR
BC
DECK A/B
DECK A
DECK B
PLAY
NORMAL
HIGH
DUBBING
REC/PAUSE
EJECT
DIRECTION
DOLBY B C NR
A B
1
2
3
DISC
RANDOM
REPEAT TIME EDIT
PLAYXCHANGE
OPEN/
CLOSE
LOCATION
USER MEMORY
MUSIC
POWER
PHONES
MEMORY
TIME ADJ
A/B/C/D/E
TIMER
PRESET
BAND
TUNING
HOUR
MIN
AUTO/MAN`L
MIN MAX
DISPLAY
VOLUME
AUX 1 AUX 2
TAPE CD TUNER
Active Servo
Technology
PLAYBACK REC/PLAYBACK
EJECT
TIMER REC MODE DOLBY NR
BC
DECK A/B
DECK A
DECK B
PLAY
NORMAL
HIGH
DUBBING
REC/PAUSE
EJECT
DIRECTION
DOLBY B C NR
A B
GX-5
OWNER’S MANUAL
Active Servo
Technology
GX-5: TCD-GX5 + KMA-GX5 + NX-GX5
Natural Sound Mini Component System
1
2
3
DISC
RANDOM
REPEAT TIME EDIT
PLAYXCHANGE
OPEN/
CLOSE
LOCATION
USER MEMORY
MUSIC
POWER
PHONES
MEMORY
TIME ADJ
A/B/C/D/E
TIMER
PRESET
BAND
TUNING
HOUR
MIN
AUTO/MAN`L
MIN MAX
DISPLAY
VOLUME
AUX 1 AUX 2
TAPE CD TUNER
Active Servo
Technology
PLAYBACK REC/PLAYBACK
EJECT
TIMER REC MODE DOLBY NR
BC
DECK A/B
DECK A
DECK B
PLAY
NORMAL
HIGH
DUBBING
REC/PAUSE
EJECT
DIRECTION
DOLBY B.C NR
•
A B
22
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other instructions
should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6 Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the unit and
cart combination to overturn.
7 Wall or Ceiling Mounting – The unit should be mounted to
a wall or ceiling only as recommended by the
manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow
of air through the ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances
that produce heat.
10 Power Sources – The unit should be connected to a
power supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service – The unit should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
SAFETY INSTRUCTIONS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
•
Explanation of Graphical Symbols
CAUTION
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
33
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
FCC INFORMATION
SPECIAL NOTES FOR FCC COMPOSITE
DEVICE
This device is a composite system. The digital device
component may not cause harmful interference.
19 Outdoor Antenna Grounding – If an outside antenna is
connected to this unit, be sure the antenna system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
EXAMPLE OF ANTENNA GROUNDING
MAST
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
44
●
Remote control transmitter
●
Batteries (size AA, UM/SUM-3, R6, HP-7)
●
AM (MW/LW) loop antenna
●
Indoor FM antenna
●
Speaker cords
●
After unpacking, check that the following parts are included.
-
+
12345
12345
678
67890
ABCDE
TIME
PROG
TAPE EDIT
+
I0
STOP
PLAY/PAUSE
DISC SKIP
RANDOM
TUNER
TAPE
PLAY STOP
REC/PAUSE
SLEEPPOWER VOLUME
DECK
CD
/
TUNER
A/B
MODE
OPEN/CLOSE
INPUT
USER
REPEAT
LOCATION
PLAY
MUSIC
FLAT
SUPPLIED ACCESSORIES
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortion – and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
We Want You Listening For A Lifetime
55
1 TCD-GX5
1
2
3
DISC
RANDOM
REPEAT TIME EDIT
PLAYXCHANGE
OPEN/
CLOSE
LOCATION
USER MEMORY
MUSIC
POWER
PHONES
MEMORY
TIME ADJ
A/B/C/D/E
TIMER
PRESET
BAND
TUNING
HOUR
MINUTE
AUTO/MAN`L
MIN MAX
DISPLAY
VOLUME
MIC
MIC MIXING
MIN MAX
AUX 1 AUX 2
TAPE CD TUNER
Active Servo
Technology
1 2 3456 7 8 9 0 A
B
C
D
EF
G
H
I
JKL M NO QR
S
T
P
1
6
2
7
3
8
4
9
OVER 15
14131211
5
10
15
T REM
A REPS F
TRACK
PGM
EDIT
AB
RANDOM
MHz
PRESET
MEMORY
STEREO
TUNED
AUTO
TIMER
SLEEP
USER
1
2
3
4
LOCATION
ARENA
CLUB
STUDIO
MUSIC
ROCK
BLUES
RAP
JAZZ
60 150 400 1K 2.5K 6K 15K
1
0
23 45 6 7 8
9A
B
CDEFGHIJ
KLM N
KARAOKE
66
2 KMA-GX5
3 NX-GX5
PLAYBACK
REC/PLAYBACK
EJECT
TIMER REC MODE DOLBY NR
BC
DECK A/B
DECK A
DECK B
PLAY
NORMAL
HIGH
DUBBING
REC/PAUSE
EJECT
DIRECTION
DOLBY B.C NR
•
UVWXYZ[\
ij hgfedcba`]
BA
l
k
77
1
2
3
4
5
7
C
B
89 0
A
6
-
+
12345
12345
678
67890
ABCDE
TIME
PROG
TAPE EDIT
+
I0
STOP
PLAY/PAUSE
DISC SKIP
RANDOM
TUNER
TAPE
PLAY STOP
REC/PAUSE
SLEEPPOWER VOLUME
DECK
CD
/
TUNER
A/B
MODE
OPEN/CLOSE
INPUT
USER
REPEAT
LOCATION
PLAY
MUSIC
FLAT
4
2
3
1
5
0.2 m – 6 m
(8” – 20’)
30°
30°
6
D
E
F
G
L
M
N
O
P
12345
12345
678
67890
ABCDE
TIME
PROG
TAPE EDIT
+
I0
STOP
PLAY/PAUSE
DISC SKIP
RANDOM
TUNER
CD
/
TUNER
MODE
OPEN/CLOSE
REPEAT
JIKH
V
SR
-
+
TAPE
PLAY STOP
REC/PAUSE
SLEEPPOWER VOLUME
DECK
A/B
INPUT
USER
LOCATION
PLAY
MUSIC
FLAT
Q
U
T
W
88
7 0
9
PHONES
8
-
+
TAPE
REC/PAUSE
SLEEPPOWER VOLUME
DECK
A/B
INPUT
USER
MUSIC
FLAT
A
To AC outlet
1
INTRODUCTION
CONTENTS
Page
PRECAUTIONS..................................................................2-3
PLACING THE SYSTEM .......................................................3
NAMES OF CONTROLS AND INDICATORS....................4-5
REMOTE CONTROL TRANSMITTER................................5-6
REMOVING THE FRONT GRILLE ........................................6
LISTENING WITH HEADPHONES........................................6
CONNECTIONS..................................................................7-8
TURNING THE POWER ON/OFF TO THIS SYSTEM...........8
SETTING THE CLOCK..........................................................9
VOLUME CONTROL..............................................................9
COMPACT DISC PLAYER OPERATION.......................10-16
TUNING OPERATION ....................................................17-19
Page
TAPE DECK OPERATION ............................................20-23
RECORDING COMPACT DISCS ...................................24-29
OTHER RECORDINGS...................................................30-31
GRAPHIC EQUALIZER/SOUND FIELD PROCESSOR
CONTROL.......................................................................32-36
KARAOKE OPERATION
(Australia, Singapore and General models only).............37
HOW TO USE THE BUILT-IN TIMER.............................38-41
CONNECTING EXTERNAL UNITS .....................................42
MAINTENANCE...................................................................42
TROUBLESHOOTING.........................................................43
SPECIFICATIONS................................................................44
Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best
performance, read this manual carefully. It will guide you in operating your YAMAHA product.
FEATURES
•
50W + 50W (6Ω) Output Power, 10% THD, 1 kHz
•
4 Preset Graphic Equalizer Modes Selectable
According to the Music Source
•
3-Mode Sound Field Processor (4-Modes for
Australia, Singapore and General Models Only)
•
4-Pairs of Equalizer and Sound Field Mode
Storing Capability
•
Microphone Jack and Mixing Level Control for
Karaoke (Australia, Singapore and General
Models Only)
•
Random Access Programmable CD Playback
•
Single Track/Entire Disc/All Disc Repeat Play
•
Random-sequence Play
•
Automatic Synchronized Recording with CD
Playback
•
Automatic CD Editing Function for Recording to
Tape
•
Double Cassette Tape Deck with Automatic
Reversing Function
•
2-Way Speed Dubbing
•
Dolby B/C Noise Reduction System
•
40 Station Automatic Preset Tuning
•
Multi-Use Timer/Sleep Timer
•
Active Servo Processing Speaker System
(NX-GX5)
•
Remote Control Capability
For basic source play, the following illustrations on top of
pages will help you to look for the section you need.
......CD playback ......Tuning
......Tape playback/recording
2
IMPORTANT
Please record the serial number of this unit in the space below.
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT
■ To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
■ This system is equipped with the newly developed Active Servo
Processing Speaker System. It is not designed for use with
conventional speakers. Therefore, do not attempt to connect
other speakers than the provided speaker system.
■ Choose the installation location of this unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also avoid
locations subject to vibration and excessive dust, heat, cold or
moisture. Keep it away from sources of hum such as
transformers and electric motors.
■ Do not operate this unit upside-down. It may overheat, possibly
causing damage.
■ Never open the cabinet. If something drops into the set, contact
your dealer.
■ The openings on the cabinet assure proper ventilation of the unit.
If these openings are obstructed, the temperature inside the
cabinet will rise rapidly and eventually damage the circuits.
Therefore, avoid placing objects against these openings and do
not install the unit where the flow of air through the ventilation
openings could be impeded.
■ Always set the VOLUME control to minimum before starting the
audio source: increase the volume gradually to an appropriate
level after play has started.
■ When not planning to use this unit for long periods of time (ie.,
vacation, etc.), disconnect the AC power plug from the wall outlet.
■ Grounding or polarization – Precautions should be taken so that
the grounding or polarization of an appliance is not defeated.
■ Do not use force on switches, controls or connection wires. When
moving the unit, first disconnect the power plug and the wires
connected to other equipment. Never pull the wire itself.
■ Do not attempt to clean the unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
■ Be sure to read the “TROUBLESHOOTING” section regarding
common operating errors before concluding that the unit is faulty.
■ To prevent lightning damage, disconnect the AC power plug and
the antenna cable when there is an electrical storm.
■ Do not plug the AC power plug to the wall socket before you
finish all connections.
■ Never allow metallic items (e.g. screwdrivers, tools, etc.) to come
near the cassette deck’s record/playback head assembly in this
unit. Doing so may not only scratch or damage the head’s mirror-
smooth finish, it may change the magnetic characteristics of the
heads, causing a deterioration in reproduction performance
quality.
■ Although the cassette deck’s record/playback heads used in this
unit are high quality heads with outstanding reproduction
characteristics, they can become dirty through the use of old
tapes or from dust accumulation over time. This can have a
serious effect on reproduction quality. Clean the heads regularly
with one of the commonly available head cleaners or with
cleaning solutions.
■ The voltage to be used must be the same as that specified on
this unit. Using this product with a higher voltage than that which
is specified is dangerous and may result in a fire or other type of
accident causing damage. YAMAHA will not be held responsible
for any damage resulting from use of this unit with a voltage other
than that which is specified.
■ The sound level at a given volume setting depends on speaker
location and other factors. Care should be taken to avoid
exposure to sudden high levels of sound, which may occur when
turning on the unit with the volume control setting at high, and to
continuous high levels of sound.
■ Sudden temperature changes and storage or operation in an
extremely humid environment may cause condensation inside the
cabinet.
Condensation can cause the unit to malfunction.
To eliminate condensation:
•
CD pickup
Leave the power on with no disc in the unit until normal
playback is possible (about 1 hour).
•
Tape head
Leave the power on with no cassette in the unit until normal
playback is possible (about 1 hour).
Note
If condensation forms on the tape head, foreign matter may
accumulate during use.
•
Remote control
Wipe off condensation on the transmitter window with a soft
cloth before operating the unit.
3
NOTE
Please check the copyright laws in your country to record from
records, compact discs, radio, etc. Recording of copyright material
may infringe copyright laws.
CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip this unit with discs remaining in it.
PLACING THE SYSTEM
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
DANGER
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT
WARNING
The apparatus is not disconnected from the AC power
source as long as it is connected to the wall outlet, even if
the apparatus itself is turned off.
TCD-GX5 KMA-GX5
TCD-GX5
KMA-GX5
Placing examples
This system can be placed any way you like. If, however, you
will place another unit or any object on top of KMA-GX5, be
sure and prevent the ventilation holes on the top panel of it
from being obstructed. If doing so, it may be damaged.
Notes
•
If the system is put in a rack, allow a space of at least 5
cm (1-15/16”) above and behind the system.
•
Disconnect the AC supply lead from the AC outlet before
connecting or disconnecting any component.
As the laser beam used in this unit is harmful to the eyes, do not
attempt to disassemble the cabinet. Refer servicing to qualified
personnel only.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
DANGER: The use of optical instrument with this product will
increase eye hazard.
CAUTION FOR MOVING THIS UNIT
Before moving this unit, first remove all discs from the disc table
and close the table by pressing the OPEN/CLOSE button, and
then switch off the power by pressing the POWER switch, and
last, after you confirm that “no disc” is illuminated on the display,
disconnect the power plug from the AC outlet.
4
NAMES OF CONTROLS AND INDICATORS
TCD-GX5 (CD player/pre-amplifier/tuner)
1 Disc Table
2 Disc Selector Buttons
3 RANDOM Button
4 REPEAT Button
5 TIME Button
6 EDIT Button
7 Stop Button:
8 Play/Pause Button: /
9 PLAYXCHANGE Button
0 OPEN/CLOSE Button:
A Skip Buttons: /
(Search Buttons: / )
B Remote Control Sensor
C LOCATION Button
D Equalizer Control Buttons
E USER Button
F POWER Switch
G MUSIC Button
H PHONES Jack
I User Program MEMORY Button
J Tuner MEMORY (TIME ADJUST) Button
K A/B/C/D/E (TIMER) Button
L PRESET (Down)/ (Up) Buttons
M BAND Button
N TUNING (Down)/ (Up) (HOUR/MINUTE)
Buttons
O AUTO/MAN’L Button
P Input Selector Buttons
Q MIC (Microphone) Jack
(Equipped on Australia, Singapore and General
Models Only)
R MIC MIXING (Microphone Mixing) Level Control
(Equipped on Australia, Singapore and General
Models Only)
S VOLUME Control
T DISPLAY Button
Display
For CD player
1 RANDOM Play Indicator
2 Tape Side Indicator
3 EDIT Indicator
4 Program (PGM) Play Indicator
5 Play Indicator:
6 Disc Indicator
7 Music Calendar Indicator
8 Music Calendar OVER 15 Indicator
9 Track Number Indicator
0 (S, F) REPEAT Indicator
A Time Display
For pre-amplifier/tuner
B Preset Equalizer Mode Indicator (MUSIC)
C Sound Field Mode Indicator (LOCATION)
D User Program Number Indicator
E SLEEP Indicator
F TIMER Set Indicator
G AUTO Tuning Indicator
H MEMORY Indicator
I STEREO Indicator
J TUNED Indicator
K Graphic Equalizer Level Indicators
L Preset Number Indicator
M Band Indicator
N Station Frequency Display
* Parts in shaded areas ( ) on the figure 1 are equipped on Australia, Singapore and General models only.
(See figure 1 on page 55 at the beginning part of this manual.)
5
KMA-GX5 (Tape deck/power amplifier)
U DECK A Cassette Compartment
V DECK A/B Button
W DECK A Indicator
X DECK B Indicator
Y PLAY Indicator
Z DUBBING (NORMAL/HIGH) Buttons and
Indicators
[ REC/PAUSE Button and Indicator
\ DECK B Cassette Compartment
] DECK A EJECT Button
` TIMER REC Button and Indicator
a Reverse MODE Selector Button and Indicators
b DOLBY NR Button and Indicators
c Fast Wind Button:
d Play Direction Indicator
e Play Button:
f Stop Button:
g Play Button:
h Play Direction Indicator
i Fast Wind Button:
j DECK B EJECT Button
NX-GX5 (Speakers)
k YST Port
l Speaker Terminals
NAMES OF CONTROLS AND INDICATORS
(See figure 2 and 3 on page 66 at the beginning part of this manual.)
Names of control buttons
(See figure 4 on page 77 at the beginning part of this
manual.)
■
Pre-amplifier/tuner control buttons
1 Remote Control Transmitter Window
2 Preset Station Number Buttons
3 A, B, C, D, E Selector Buttons
4 LOCATION Button
5 Equalizer Control Buttons
6 USER Button
7 POWER Switch
8 SLEEP Button
9 INPUT Selector Button
0 VOLUME – (Down)/+ (Up) Buttons
A FLAT Button
B MUSIC Button
C TUNER Input Selector Button
■ CD player control buttons
D Track Number Input Buttons
E TIME Button
F DISC SKIP Button
G Skip Buttons: /
(Search Buttons: / )
H Disc Play MODE Selector Button
I REPEAT Button
J RANDOM Button
K OPEN/CLOSE Button:
L PLAY/PAUSE Button:
M STOP Button:
N EDIT Button
O TAPE Button
P PROGRAM Button
■
Tape deck control buttons
Q Play Button:
R Stop Button:
S Play Button:
T Fast Wind Button:
U Fast Wind Button:
V DECK A/B Button
W REC/PAUSE Button:
REMOTE CONTROL TRANSMITTER
(See figure 7 on page 88.)
The front grille is fastened to the enclosure at three points,
and can be removed if desired. To remove the grille, hold on
to the frame and slowly pull straight away from the speaker.
To reattach, line up the three pegs on the inside surface of
the grille with the three corresponding holes on the speaker
and push gently.
Note
When the grille is removed, take care not to touch the
speaker units with your hands or to exert excessive force with
tools.
REMOVING THE FRONT GRILLE
6
Loading the batteries for the
remote control transmitter
(See figure 5 on page 77.)
1 Remove the battery compartment cover.
(Press the left edge of the cover to right with a finger, and
then pull it upward.)
2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or
equivalent) into the battery compartment.
* Installing the batteries improperly may cause failure.
3 Replace the battery compartment cover.
Precautions for battery use
•
Insert the batteries according to the direction indicated in
the battery compartment.
•
Replace all batteries with new ones at the same time.
•
Remove the batteries if they are weak or if the unit is not
in use for long periods.
•
Don’t mix normal batteries with rechargeable batteries.
Proper use of the remote control
transmitter
(See figure 6 on page 77.)
Aim (within the range of 60° with no obstacles) the remote
control transmitter at the remote control sensor and operate
as shown.
Notes concerning use
•
Replace the batteries if control distance decreases or
operation becomes unstable.
•
Periodically clean the transmitter window on the remote
control transmitter and the sensor on the main unit with a
soft cloth.
•
Exposing the sensor on the main unit to strong light
(especially an inverter type of fluorescent lamp etc.) may
interfere with operation. In this case, reposition the main
unit to avoid direct lighting.
•
Keep the remote control transmitter away from moisture,
excessive heat, shock and vibrations.
•
The remote control transmitter’s usable range is within
0.2m (8”) and 6m (20’) away from the sensor.
REMOTE CONTROL TRANSMITTER
(See figure 8 on page 88.)
•
Be sure that your headphones have a 3.5 mm (1/8”)
diameter plug and are between 16 ohms and 50 ohms
impedance. Recommended impedance is 32 ohms.
•
When headphones are connected, the speakers are
defeated automatically. Adjust the VOLUME control for
desired volume.
LISTENING WITH HEADPHONES
7
75Ω
UNBAL.
FM ANT
GND
AM ANT
Antenna connection
(1) Supplied FM antenna
Connect the FM antenna wire to the corresponding terminal
and direct the FM antenna wire to the direction where the
strongest signal can be received.
(2) Supplied AM (MW/LW) loop antenna
Connect the AM (MW/LW) loop antenna wires to the
corresponding terminals. Position the AM (MW/LW) loop
antenna for optimum reception. Place the AM (MW/LW) loop
antenna on a shelf etc., or install it on the rack or wall with
screws (not supplied).
Notes
•
When static is still heard even after adjusting the position
of the AM (MW/LW) loop antenna, try reversing the wire
connections (top to bottom).
•
Do not place the AM (MW/LW) loop antenna on the unit. It
will result in noise generation, since the unit is equipped
with digital electronics. Place the AM (MW/LW) loop
antenna away from the unit.
(3) External FM antenna
Use an external FM antenna instead of an indoor FM
antenna if you need better reception. Consult your dealer.
(4) External AM (MW/LW) antenna
Use an external AM (MW/LW) antenna if you need better
reception. Consult your dealer.
Note
When using an external AM (MW/LW) antenna, be sure to
keep the wire of the AM (MW/LW) loop antenna connected.
CONNECTIONS
or
Earth rod
7.5 m (25 feet)
15 m (49 feet)
75Ω
UNBAL.
FM ANT
GND
AM ANT
* For U.K. and Europe models, “AM” is replaced by
“MW LW”.
(1)
(2)
(3)
(4)
FREQUENCY STEP switch (Singapore and General
models only)
Because the interstation frequency spacing differs in
different areas, set the FREQUENCY STEP switch
(located at the rear) according to the frequency spacing in
your area. Before setting this switch, disconnect the AC
supply lead of this unit from the AC outlet.
8
STANDBY mode
While the power is on, pressing the POWER switch (or the
POWER switch on the remote control transmitter) switches
the system to the STANDBY mode. (In this mode, the
display shows only the time.) In this mode, main voltage is
still present inside the system. If you want to switch off the
system completely, disconnect the AC power plug from the
AC outlet.
TURNING THE POWER ON/OFF TO THIS SYSTEM
(See figure A on page 88.)
If the AC supply lead is connected to the AC outlet, this
system can be turned ON and OFF (STANDBY mode) by
pressing the POWER switch on the front panel of TCD-GX5
or the POWER switch on the remote control transmitter.
Automatic power-off function
The power of this system will be automatically turned off if
there is no operation on the control parts of this system, no
illumination on the graphic equalizer indicators and no
playback of CD or tape for about 30 minutes.
Speaker connection
Connect each speaker wire to the SPEAKERS terminals.
Cautions
•
Do not let the bare speaker wires touch each other as this
could damage the power amplifier and/or speakers.
•
When connecting the speakers to the unit, be sure to
connect the speaker wires properly. Do not make a
mistake from the right channel to the left channel and from
the plus (+) terminal to the minus (–) terminal.
•
Do not connect these SPEAKERS terminals to speakers
other than the provided speaker system NX-GX5.
System connection
(See figure 9 on page 88.)
Connect the red connector on the rear of TCD-GX5 to the red
socket on the rear of KMA-GX5.
How to disconnect the system connector
Grasp both sides of the connector to disconnect the
connector.
Connecting the AC supply lead
(See figure 0 on page 88.)
•
After connecting the speakers and system connectors,
plug the AC supply lead into a convenient AC outlet.
•
Unplug the AC supply lead from the AC outlet if the unit is
not to be used for a long period of time.
CONNECTIONS
R L
9
MIN MAX
VOLUME
-
+
VOLUME
VOLUME CONTROL
Front panel operation
Rotate the VOLUME control towards MAX to increase the
volume, and towards MIN to decrease the volume.
Remote control operation
Press the VOLUME + button to increase the volume and the
VOLUME – button to decrease the volume.
1 While the power is on, press the DISPLAY button to
display the time. If the power is off, you can proceed to the
next step.
2 While pressing the TIME ADJ button, press the HOUR
button and set the hour.
* Press the HOUR button once to advance the time by 1
hour. Press and hold to advance continuously.
3 While pressing the TIME ADJ button, press the MINUTE
button and set the minute.
* Press the MINUTE button once to advance the time by
1 minute. Press and hold to advance continuously.
* The hour setting will not advance even if minute is
advanced from “59” to “00”.
In the event of a power failure or when the AC supply
lead is disconnected.
The time display will go out, however, the clock will function
for about 5 minutes without power supply. So you do not
have to reset the time if the AC power supply is resumed
within about 5 minutes.
When the AC power supply is resumed after more than 5
minutes pass without power supply, the time display will flash
on and off to indicate that the time must be reset.
Note
If this system is left for several minutes without setting the
time after the AC power lead of this system is connected to
the AC outlet, there may be a case that the display is turned
into a demonstration mode. (This mode is virtually
unnecessary for using this system.)
In this case, first turn the power on by pressing the POWER
switch to cancel the mode, and then set the time.
MINUTE
DISPLAY
MEMORY
TIME ADJ
TUNING
HOUR
MINUTE
TUNING
HOUR
MEMORY
TIME ADJ
SETTING THE CLOCK
Changes.
Changes.
1
2
3
10
CD playback
1 Press the CD input selector button.
2 Press the OPEN/CLOSE button to open the disc table.
3 Place discs on the trays, label side up.
* Up to three discs can be loaded on the trays.
* 8 cm (3”) discs may be played without an adaptor.
4 Press the OPEN/CLOSE button to close the disc table.
* The total number of tracks and the total playing time of
the disc being selected will be displayed for several
seconds.
* The music calendar will be displayed only for the
number of tracks on the disc being selected.
* If the compact disc contains more than 15 tracks, the
“OVER 15” indicator will light up on the music calendar.
5 If necessary, change the disc play mode by pressing the
disc play MODE selector button on the remote control
transmitter while watching the display.
Single disc play mode: Only a designated disc is played
back.
All disc play mode: All discs on the disc table are played
back sequentially.
6 If necessary, select another disc by pressing the DISC
SKIP button on the remote control transmitter once or
more (so that the corresponding disc tray number is
located on top of the disc indicator).
7 Press the play/pause button to start playback from track 1.
* The “ ” indicator will appear and playback will begin.
As the playback of each track on the music calendar is
finished, that track number will go out.
For easier operation
Pressing the disc selector button (1, 2 or 3) will select the
disc directly, and playback will begin from track 1
automatically.
COMPACT DISC PLAYER OPERATION
POWER
POWER
Music calendar
The disc on the tray located
on top of this indicator is
now being selected.
Total number of tracks Total playing time
Disc selector buttons
1
1
2, 4
6
3
7,
11, 22 2, 4
7, 11, 22
1
6
2
7
3
8
4
9
1211
5
10
T
TRACK
-
+
12345
12345
678
67890
ABCDE
TIME
PROG
TAPE EDIT
+
I0
STOP
PLAY/PAUSE
DISC SKIP
RANDOM
TUNER
TAPE
PLAY STOP
REC/PAUSE
SLEEPPOWER VOLUME
DECK
CD
/
TUNER
A/B
MODE
OPEN/CLOSE
INPUT
USER
REPEAT
LOCATION
PLAY
MUSIC
FLAT
Illuminates only when the all
disc play mode is selected.
5
11
12345
12345
678
67890
E
+
I0
CD/TUNER
-
+
12345
12345
678
67890
ABCDE
TIME
PROG
TAPE EDIT
+
I0
STOP
PLAY/PAUSE
DISC SKIP
RANDOM
TUNER
TAPE
PLAY STOP
REC/PAUSE
SLEEPPOWER VOLUME
DECK
CD
/
TUNER
A/B
MODE
OPEN/CLOSE
INPUT
USER
REPEAT
LOCATION
PLAY
MUSIC
FLAT
COMPACT DISC PLAYER OPERATION
Direct operation
Even when an input source other than CD player is selected,
pressing the play/pause button, a disc selector button, a track
number input button or the RANDOM play button, or pressing
the front edge of the disc table gently will start playback
directly. In this case, if the tape deck is playing back a tape,
it will be stopped automatically.
* These ways of playback can also be used to close the disc
table. If the table is closed in these ways, playback will
begin automatically, however, the display will not show the
total number of tracks and the total playing time of the disc
to be played.
PLAYXCHANGE
During playback, you can open the disc table by pressing the
PLAYXCHANGE button without interrupting disc playback.
However, in this case, pressing the DISC SKIP button on the
remote control transmitter has no effect.
Precautions
•
If TV or radio interference occurs during CD player
operation, move the unit away from the TV or radio.
•
Subjecting the unit to shock or vibration can cause
mistracking.
•
Playing some compact discs at high volume can cause
mistracking. In this case, listen at lower volume.
•
Do not pull open the disc table forcibly with your hands.
•
Do not push the disc table while it is moving.
•
If the power fails while the table is open, wait until the
power supply returns or gently push the table manually to
close it.
•
The temperature range for playing compact discs is
recommended to be 5°C (41°F) – 35°C (95°F).
Direct-selection play
By using the track number input buttons on the remote
control transmitter, any track you wish to listen to can be
played directly.
Use the track number input buttons to select the desired
track number. Play will begin automatically.
A. For example, to choose selection 5
Press the “5” button.
B. For example, to choose selection 12
(1)Press the “+10” button.
(2)Within 3 seconds, press “2” button.
C. For example, to choose selection 20
(1)Press the “+10” button.
(2)Within 3 seconds, press the “+10” button again.
(3)Within 3 seconds, press the “0” button.
Note
A track number higher than the number of tracks on the disc
cannot be selected. Also, if a higher track number is selected
while the disc table is open, play will begin from the last track
on the disc when the disc table is closed.
To interrupt playback
11 Press the play/pause button.
* The “ ” indicator will flash.
22 Press the play/pause button to resume playback from the
same point.
To stop playback
Press the stop button.
To switch the unit off after use
Turn the unit off by pressing the POWER switch. (The
indicators will go off except for the current time display.)
-
+
12345
12345
678
67890
ABCDE
TIME
PROG
TAPE EDIT
+
I0
STOP
PLAY/PAUSE
DISC SKIP
RANDOM
TUNER
TAPE
PLAY STOP
REC/PAUSE
SLEEPPOWER VOLUME
DECK
CD
/
TUNER
A/B
MODE
OPEN/CLOSE
INPUT
USER
REPEAT
LOCATION
PLAY
MUSIC
FLAT
12
COMPACT DISC PLAYER OPERATION
“Skip search” and “Manual search” are performed using the
same buttons.
Skip search
The beginning of any track can be found automatically.
1 Select a disc and begin playback.
2 Press the button to advance or button to
reverse through the disc.
Press once for each track to be advanced or reversed.
•
Press once to advance to the track following the
one now playing back.
•
Press once to return to the start of the track now
playing back.
•
Press twice to return to the track before the track
now playing back.
Notes
•
This function can also be performed while the unit is
stopped. Press the play/pause button when your desired
track number appears in the track number display.
Playback will begin from the beginning of the track.
•
This function will be performed forward or backward from
any point on the disc. However, it will not move forward
during playback of the final track.
Manual search
1 Begin playback.
2 Press and hold the button to advance play rapidly,
and the button to reverse play rapidly.
*
The sound can be heard (although slightly garbled)
during manual search in either direction. This is
convenient for reviewing the contents quickly.
Note
Manual search can also be performed while playback is
paused, though no sound will be heard.
1
2
1
2
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/