Kollmorgen PCMM Инструкция по установке

PCMM, AKC-PCM-Mx

Installation Manual

Edition: C, February 2018

Valid for AKC-PCM-Mx (PCMM) Hardware Revision A

Part Number 903-300000-99

English Deutsch Français Italiano Português Español Русский

Original Language is English. All other content is translated from the genuine English content.

Keep allmanualsas a product component during the life span of the product. Passall manuals to future users and owners of the product.

Bewahren Sie alle Anleitungen während der gesamten Nutzungs-

dauer des Produkts als Produktkomponente auf. Händigen Sie alle

Anleitungen künftigen Anwendern/Besitzern des Produkts aus.

Mantenha todos os manuais como um componente do produto dur-

ante a vida útildo produto. Passe todos os manuais para os futuros

usuários e proprietários do produto.

Le manuel faisant partie intégrante du produit, conservez-le

pendant toute la durée de vie du produit. Remettez le manuel au

futur utilisateur ou propriétaire du produit.

Conserve el manual durante toda la vida útildel producto. Entregue el

manual a posteriores usuarios o propietariosdel producto.

Conservare il manuale per l’intera durata del prodotto. In caso di

cambio di proprietà il manuale deve essere fornito al nuovo

utilizzatore quale parte integrante del prodotto.

Сохраняйте все руководства как составную часть продукта в

течение всего срока его эксплуатации. Передавайте

руководство следующемупользователю или владельцу

продукта.

Record of Document Revisions

Revision Remarks

A, 03/2016 First edition

B, 07/2016 Unnecessary warning notes deleted, HWR A (UL certified), 24V supply current updated

C, 02/2018 Prohibited use section updated, X6/X32 LED mapping added, M2 version added

Contents

English (➜ # 3) Português (➜ # 75)

Deutsch (➜ # 21) Español (➜ # 93)

Français (➜ # 39) Русский (➜ # 111)

Italiano (➜ # 57)

Appendix/Dimensions (➜ # 130) Appendix/Faults and Warnings (➜ # 137)

Appendix/Connections (➜ # 131) Appendix/Approvals (➜ # 138)

Hardware Revision (HR)

AKC-PCM KAS SW Remarks

- - Pilot series

A from 2.10 Start revision, UL certified

Technical changes to improve the performance of the equipment may be made without prior notice!

method) or stored, processed, copied or distributed by electronic means without the written permission of Koll-

morgen.

Technische Änderungen, die der Verbesserung der Geräte dienen, vorbehalten!

Verfahren) ohne schriftliche Genehmigung der Firma Kollmorgen reproduziert oder unter Verwendung elektron-

ischer Systeme verarbeitet, vervielfältigt oder verbreitet werden.

Toutes modifications techniques concourant pour l'amélioration des appareils réservées !

photocopiée, microfilmée ou par un autre procédé) ou encore traitée, reproduite ou diffusée au moyen de systèmes

électroniques sans autorisation écrite préalable de Kollmorgen.

Il produttore si riserva la facoltà di apportare modifiche tecniche volte al miglioramento degli apparecchi

copia, microfilm o altro processo) o diffusa mediante l'uso di sistemi elettronici senza l'approvazione scritta della ditta

Kollmorgen o rielaborata, riprodotta o diffusa mediante l’uso di sistemi elettronici.

Alterações técnicas que melhoram o desempenho do dispositivo podem ser feitos sem aviso prévio!

trabalho pode ser reproduzida sob qualquer forma (por fotocópia, microfilme ou qualquer outro método) ou

armazenado, processado, copiado ou distribuído por meios eletrônicos sem a permissão escrita da Kollmorgen.

Reservado el derecho de introducir modificaciones técnicas para la mejora de los equipos

Reservados todos los derechos. Prohibida la reproducción total o parcial de la presente obra por cualquier medio

(fotocopia, microfilm u otros), así como su procesamiento, reproducción y divulgación por medio de sistemas elec-

trónicos, sin expresa autorización escrita de la empresa Kollmorgen.

Сохраняется право вносить технические изменения, служащие для совершенствования устройств!

ни было части данного руководства в любой форме (в печатной, в виде фотокопии, микрофильма или другим

способом), а также обрабатывать, размножать или распространять их с использованием электронных систем.

2 Kollmorgen | kdn.kollmorgen.com | February 2018

1 English

1.1 General 4

1.1.1 Notes for the Printed Edition (paper version) 4

1.1.2 Symbols Used 4

1.1.3 Abbreviations Used 5

1.1.4 Standards Used 5

1.2 Safety 6

1.2.1 You should pay attention to this 6

1.2.2 Use as Directed 7

1.2.3 Prohibited Use 7

1.3 Handling 8

1.3.1 Transport 8

1.3.2 Packaging 8

1.3.3 Storage 8

1.3.4 Decommissioning 8

1.3.5 Maintenance and cleaning 9

1.3.6 Disassemble 9

1.3.7 System Repair 9

1.3.8 Disposal 10

1.4 Technical description and data 11

1.4.1 The PCMM Motion Controller 11

1.4.2 Package Supplied 11

1.4.3 Technical Data 12

1.5 Mechanical Installation 13

1.5.1 Important Notes 13

1.5.2 Guide to Mechanical Installation 13

1.6 Electrical Installation 14

1.6.1 Important Notes 14

1.6.2 Guide to electrical installation 14

1.6.3 Push-buttons (B2, B3) 15

1.6.4 SD Card Slot 16

1.6.5 Service Interface (X32) 17

1.6.6 Motion Bus Interface (X6) 18

1.6.7 Rotary Switch (RS1) 18

1.7 Setup 20

1.7.1 Important Notes 20

1.7.2 Setup with KAS IDE 20

1.8 Troubleshooting the PCMM 20

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 3

PCMM Installation Manual | 1 English

1.1 General

This manual, PCMM Installation Manual, presents the relevant information for safe install-

ation and setup of the PCMM Motion Controller.

Additional documents include the following:

EtherCAT Communication (PDF format):

Describes how to use your controller in EtherCAT applications.

Ethernet/IP Communication: describes how to use your controller in Ethernet/IP applic-

ations.

KAS Online help (WebHelp format):

Describes how to use your controller in common applications. It also provides tips for

setup and maximizing your system performance. The online help includes the Parameter

and Command Reference Guide which provides information for the parameters and com-

mands used to program the motion system.

All documents are available from the KDN (http://kdn.kollmorgen.com) or Kollmorgen Web-

site (http://www.kollmorgen.com).

1.1.1 Notes for the Printed Edition (paper version)

A printed version of the manual is enclosed with each product. For

environmental reasons, the document was reduced in size and prin-

ted on DIN A5.

Should you experience difficulties reading the font size of the

scaled-down printed version, you can print and use the PDF ver-

sion in DIN A4 format 1:1. You can find the PDF version on the

DVD accompanying the product and on the Kollmorgen website.

1.1.2 Symbols Used

Symbol Indication

DANGER

Indicates a hazardous situation which, if not avoided, will res-

ult in death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Indicates situations which, if not avoided, could result in prop-

erty damage.

This symbol indicates important notes.

4 Kollmorgen | kdn.kollmorgen.com | February 2018

1.1.3 Abbreviations Used

Abbreviation Meaning

(➜ # 53) "see page 53" in this document

CE Communité Européenne

EMC Electromagnetic compatibility

PC Personal computer

PCMM Programmable Controller Multi-Axis Master.

PE Protective earth

RCD Residual current device

SFF Safe failure fraction

VAC Volts, alternating current

VDC Volts, direct current

1.1.4 Standards Used

Standard Content

ISO 4762 Hexagon socket head cap screws

ISO 12100 Safety of machinery: Basic concepts, general principles for design

IEC 60085 Electrical insulation - Thermal evaluation and designation Maintenance

IEC 60204 Safety of Machinery: Electrical equipment of machinery

IEC 60364 Low-voltage electrical installations

IEC 60439 Low-Voltage Switchgear and Controlgear Assemblies

IEC 60529 International protection rating (IP code)

IEC 60721 Classification of environmental conditions

IEC 61000 Electromagnetic compatibility (EMC)

IEC 61131 Programmable controllers

IEC 61491 Electrical equipment of industrial machines – Serial data link for real-time

communications between controls and drives.

IEC UL 61010-1 Safety requirements for electrical equipment for measurement, control,

and laboratory use

IEC 82079 Preparation of instructions for use - Structuring, content and presentation

IEC - International Electrotechnical Commission

ISO - International Organization for Standardization

UL - Underwriters Laboratories

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 5

PCMM Installation Manual | 1 English

1.2 Safety

1.2.1 You should pay attention to this

Specialist staff required!

Only properly qualified personnel are permitted to perform such tasks as transport, assembly,

setup and maintenance. Qualified specialist staff are persons who are familiar with the trans-

port, installation, assembly, commissioning and operation of PCMM and who bring their rel-

evant minimum qualifications to bear on their duties:

Transport: only by personnel with knowledge of handling electrostatic sensitive com-

ponents.

Unpacking: only by electrically qualified personnel.

Installation: only by electrically qualified personnel.

Basic tests / Setup: only by qualified personnel with knowledge of electrical engineering

and motion control technology

The qualified personnel must know and observe ISO 12100 / IEC 60364 / IEC 60664 and

national accident prevention regulations.

Read the documentation!

Read the available documentation before installation and commissioning. Improper handling

of the device can cause harm to people or damage to property. The operator of systems using

the PCMM must ensure that all personnel who work with the motion system read and under-

stand the manual before using the system.

Check Hardware Revision!

Check the Hardware Revision Number of the product (see product label). This number is the

link between your product and the manual, it must match the Hardware Revision Number on

the cover page of the manual.

Pay attention to the technical data!

Adhere to the technical data and the specifications on connection conditions (rating plate and

documentation). If permissible voltage values or current values are exceeded, the PCMM

can be damaged.

Perform a risk assessment!

The manufacturer of the machine must generate a risk assessment for the machine, and take

appropriate measures to ensure that unforeseen movements cannot cause injury or damage

to any person or property. Additional requirements on specialist staff may also result from the

risk assessment.

Observe electrostatic sensitive components!

The PCMM contain electrostatic sensitive components which may be damaged by incorrect

handling. Electrostatic discharge your body before touching the PCMM. Avoid contact with

highly insulating materials (artificial fabrics, plastic film etc.). Place the PCMM on a con-

ductive surface.

Never modify the products!

It is not allowed to modify the PCMM without permission by the manufacturer. Opening the

housing causes loss of warranty.

6 Kollmorgen | kdn.kollmorgen.com | February 2018

1.2.2 Use as Directed

PCMMs are intended for controlling Kollmorgen drives in a motion system.

PCMMs are components that are built into electrical plants or machines and can only be oper-

ated as integral components of these plants or machines. The manufacturer of the machine

used with a PCMM must generate a risk assessment for the machine.

When the PCMMs are built into machines or plant, the motion system must not be used until

it has been established that the machine or plant fulfills the requirements of the regional dir-

ectives.

Cabinet and wiring

PCMM must only be operated permanently connected in a closed control cabinet suitable for

the ambient conditions (➜ # 12). Ventilation or cooling may be necessary to keep the tem-

perature within the cabinet below 55 °C.

Use only copper conductors for wiring. The conductor cross-sections can be derived from the

standard IEC 60204 (alternatively for AWG cross-sections: NEC Table 310-16, 75 °C

column).

Power supply

The PCMM can be supplied by 24V DC industrial supply networks.

1.2.3 Prohibited Use

Other use than that described in chapter “Use as directed” is not intended and can lead to per-

sonnel injuries and equipment damage. The PCMM may not be used with a machine that

does not comply with appropriate national directives or standards. The use of the PCMM in

the following environments is also prohibited:

potentially explosive areas

environments with corrosive and/or electrically conductive acids, alkaline solutions, oils,

vapors, dusts

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 7

PCMM Installation Manual | 1 English

1.3 Handling

1.3.1 Transport

Transport the PCMM in accordance with IEC 61800-2 as follows:

Transport only by qualified personnel in the manufacturer’s original recyclable packaging.

Avoid shocks while transporting.

Store at or below maximum stacking height of 8 cartons.

Transport only within specified temperature ranges:

-25 to +70 °C, max. rate of change 20 K/hour, class 2K3.

Transport only within specified humidity:

max. 95% relative humidity, no condensation, class 2K3.

The PCMM contain electro-statically sensitive components that can be damaged by incor-

rect handling. Electro-statically discharge yourself before touching the PCMM. Avoid con-

tact with highly insulating materials, such as artificial fabrics and plastic films. Place the

PCMM on a conductive surface.

If the packaging is damaged, check the unit for visible damage. Inform the shipper and the

manufacturer of any damage to the package or product.

1.3.2 Packaging

The PCMM packaging consists of recyclable cardboard with inserts and a label on the out-

side of the box.

Packaging dimension (HxWxL): 107mm x 268mm x 220mm

Total weight: 1.2 kg

1.3.3 Storage

Store the PCMM in accordance with IEC 61800-2 as follows:

Store only in the manufacturer’s original recyclable packaging.

Store at or below maximum stacking height of 8 cartons.

Store only within specified temperature ranges: -25 to +55 °C, max.rate of change

20K/hour, class 1K4.

Storage only within specified humidity: 5 to 95% relative humidity, no condensation, class

1K3.

1.3.4 Decommissioning

Only professional staff who are qualified in electrical engineering are allowed to decom-

mission parts of the system.

Switch off the main switch of the switchgear cabinet.

Secure the system against restarting.

Block the main switch.

8 Kollmorgen | kdn.kollmorgen.com | February 2018

1.3.5 Maintenance and cleaning

The device does not require maintenance. Opening the device voids the warranty. The inside

of the unit can only be cleaned by the manufacturer.

Do not immerse or spray the device. Avoid that liquid enters the device.

To clean the device exterior:

1. Decommission the device (see chapter 1.3.4 "Decommissioning").

2. Casing: Clean with isopropanol or similar cleaning solution.

Caution : Highly Flammable! Risk of injury by explosion and fire.

Observe the safety notes given on the cleaning liquid package.

Wait at least 30 minutes after cleaning before putting the device back into oper-

ation.

3. Protective grill on fan: Clean with a dry brush.

1.3.6 Disassemble

Only professional staff who are qualified in electrical engineering are allowed to disassemble

parts of the system.

1. Decommission the device (see chapter 1.3.4 "Decommissioning").

2. Remove the connectors. Disconnect the potential earth connection last.

3. Demount: loosen the fastening screws. Remove the device.

1.3.7 System Repair

Only professional staff who are qualified in electrical engineering are allowed to exchange

parts of the drive system.

CAUTION: Automatic Start! During replacement work a combination of hazards and mul-

tiple episodes may occur.

Work on the electrical installation may only be performed by trained and qualified per-

sonnel, in compliance with the regulations for safety at work, and only with use of pre-

scribed personal safety equipment.

Exchange of PCMM

Only the manufacturer can repair the device. Opening the device voids the warranty.

1. Decommission the device (see chapter 1.3.4 "Decommissioning").

2. Demount the device (see chapter 1.3.6 "Disassemble").

3. Send the device to the manufacturer.

4. Install a new device as described in this manual.

5. Setup the system as described in this manual.

Exchange of other drive system parts

If parts of the drive system (for example cables) must be replaced, proceed as follows:

1. Decommission the device (see chapter 1.3.4 "Decommissioning").

2. Exchange the parts.

3. Check all connections for correct fastening.

4. Setup the system as described in this manual.

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 9

PCMM Installation Manual | 1 English

1.3.8 Disposal

To dispose the unit properly, contact a certified electronic scrap disposal merchant.

In accordance with the WEEE-2002/96/EC-Guidelines and similar, the manufacturer accepts

returns of old devices and accessories for professional disposal. Transport costs are the

responsibility of the sender.

Send the devices in the original packaging to the manufacturer address:

North America South America

KOLLMORGEN

201 West Rock Road

Radford, VA 24141, USA

KOLLMORGEN

Avenida Tamboré - 1077 Tamboré

Barueri - SP Brasil

CEP:06460-000, Brazil

Europe Asia

KOLLMORGEN Europe GmbH

Pempelfurtstr. 1

40880 Ratingen, Germany

KOLLMORGEN

Floor 4, Building 9, No. 518,

North Fuquan Road, Changning District,

Shanghai 200335, China

10 Kollmorgen | kdn.kollmorgen.com | February 2018

1.4 Technical description and data

1.4.1 The PCMM Motion Controller

PCMM means Programmable Controller Multi-Axis Master. The controller Includes pro-

grammable motion control using PLCOpen or PipeNetwork motion engines and PLC with all

5 IEC 61131 languages.

EtherCAT connects the PCMM to other components in the drive system.

1.4.2 Package Supplied

When a PCMM controller is ordered, the following items are included in the package:

PCMM

Printed copy of PCMM Installation Manual

Mating connectors X1, X35 and X36

The mating SubD and RJ45 connectors are not included in the package.

Part Number Scheme

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 11

PCMM Installation Manual | 1 English

1.4.3 Technical Data

Rated Data

Electrical Data Units PCMM

Rated supply voltage V DC 24 V ±10% see (➜ # 133)

Rated input current A 1.25

Rated input power W 30

Permitted switch on/off frequency 1/h 30

Mechanical data

Weight kg 0.45

Dimensions (HxWxD) mm 174 x 50 x 111.5 see (➜ # 130)

Dimensions (HxWxD) with connectors mm 208 x 50 x 147.5 see (➜ # 130)

Recommended Tightening Torques

X1, X35, X36 Nm (in-lbf) 0.2 to 0.25 (2)

PE block Nm (in-lbf) 1.7 (15)

Fusing

Circuit Max.

Ampere rating

Example class J

Cooper Bussmann

Example class J

Ferraz Shawmut

24 V DC supply 8A (Time-Delay) LPJ8SP/DFJ8 AJT8

Inputs/Outputs

Interface Electrical Data

Digital inputs

see (➜ # 135)

ON: 3.5 VDC to 30 VDC, 2 mA to 15 mA

OFF: -2 VDC to 2 VDC, max.15 mA

Galvanic isolation for 250 VDC

Update rate: Software 250 µs

Source or Sink type

Digital outputs

see (➜ # 136)

Max. 30 VDC, 100 mA

Short circuit proof

Galvanic isolation for 250 VDC

Update rate: 1 ms

Active low or active high

Ambient Conditions, Ventilation, and Mounting Position

Storage, Transport (➜ # 8)

Ambient temperature

in operation

0 to +55° C under rated conditions

Humidity

in operation

Relative humidity 5 to 85%, no condensation, class 3K3

according to IEC 60721-3-3

Site altitude Up to 2500 meters above mean sea level without restriction

Pollution level Pollution level 2 as per IEC 61010-1

Vibrations Class 3M1 according to IEC 60721-3-3

Enclosure protection IP 20 according to IEC 60529

Mounting position Vertical

Ventilation Free convection

12 Kollmorgen | kdn.kollmorgen.com | February 2018

1.5 Mechanical Installation

Dimensions overview see (➜ # 130).

1.5.1 Important Notes

Protect the PCMM from impermissible stresses. In particular, do not let any components

become bent or any insulation distances altered during transport and handling. Avoid contact

with electronic components and contacts.

The PCMM will switch itself off in case of overheating. Ensure that there is an adequate flow

of cool, filtered air into the bottom of the control cabinet, or use a heat exchanger.

Do not mount devices that produce magnetic fields directly beside the PCMM. Strong mag-

netic fields can directly affect internal components. Install devices which produce magnetic

field with distance to the PCMM and/or shield the magnetic fields.

1.5.2 Guide to Mechanical Installation

The following tools are required (at a minimum) to install the PCMM; your specific installation

may require additional tools:

M4 hexagon socket-cap screws (ISO 4762)

3 mm T-handle Allen key

No. 2 Phillips head screwdriver

Small slotted screwdriver

Install the PCMM unit as follows:

1. Prepare the site.

Mount the PCMM in a closed control cabinet. The site must be free from conductive or cor-

rosive materials.

2. Check ventilation.

Check that the ventilation of the PCMM is unimpeded, and keep within the permitted ambi-

ent temperature (➜ # 12). Keep the required space clearance above and below the

PCMM.

3. Check cooling system.

If cooling systems are used for the control cabinet, position the cooling system so that

condensation water cannot drip onto the PCMM or peripheral devices.

4. Mount the PCMM.

Assemble the PCMM and power supply near each other on the conductive, grounded

mounting plate in the cabinet.

5. Ground the PCMM.

Ground the mounting plate, PCMM housing and CNC-GND of the control system.

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 13

PCMM Installation Manual | 1 English

1.6 Electrical Installation

For connector overview and I/O connection (➜ # 131).

1.6.1 Important Notes

Only professional staff who are qualified in electrical engineering are allowed to install the

controller. Wires with color green with one or more yellow stripes must not be used other

than for protective earth (PE) wiring.

Excessively high external fusing will endanger cables and devices. The fusing of the 24 V

supply must be installed by the user, best values (➜ # 12).

It is permissible to use the setup software (KAS IDE) to alter the device settings. Any other

alterations will invalidate the warranty.

1.6.2 Guide to electrical installation

Install the PCMM electrical system as follows:

1. Select cables in accordance with IEC 60204 .

2. Install shielding and ground the PCMM.

Ground the mounting plate and CNC-GND of the control system.

3. Connect all interfaces according to the wiring diagrams in (➜ # 131).

14 Kollmorgen | kdn.kollmorgen.com | February 2018

1.6.3 Push-buttons (B2, B3)

The push-buttons can be used to start predefined functions.

Function Push-button Remarks

Boot-time functions (press and hold button during power-on boot sequence)

Recovery

Mode

B2 Press and hold to boot into recovery mode.

Menu B3 Press and hold to block the application auto-start and to start

cycling through the menu items.

Operational functions (press button during normal operation mode)

Menu B3 Press to cycle through the menu items. The menu items will dis-

played on the 7-segment LED repeatedly for 10 s and can be

selected py pressing B2.

Select Menu

Item

B2 Press while the required menu item is displayed to perform

action.

Application is running, available menu items:

'IP' address

'stop' application (confirm)

No application is running, available menu items:

'IP' address

'start' application (confirm)

'reset' to defaults (confirm)

'backup' to SD card (confirm)

'restore' from SD card (confirm)

Confirm B2 If the selected menu item selection requires a confirmation, "y"

is displayed for 10 s - press B2 to confirm.

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 15

PCMM Installation Manual | 1 English

1.6.4 SD Card Slot

PCMM offers a SD card slot and push-buttons B2 and B3 to activate file transfers from/to the

PCMM and SD Memory Card. These features can be started from the KAS IDE software as

well. Detailled description can be found in the KAS Online Help.

The backup/restore operations (PCMM to SD or SD to PCMM) will not be possible if an

application is running.

Stop the application from the web-browser or use the B2/B3 “stop” action before initiating

any SD card functionality.

If a fault occurs during save/load operations, the fault number is displayed in the one digit dis-

play with E followed by two digits. Error codes (➜ # 137) .

Supported SD card types

SD cards are preformatted by the manufacturer. The following table outlines the SD card

types and PCMM support.

SD Type File System Capacity Supported

SD (SDSC) FAT16 1MB to 2GB YES

SDHC FAT32 4GB to 32GB YES

SDXC exFAT (Microsoft) >32GB to 2TB NO

Features

If an SD card is plugged into the SD slot and no application programm is running, the push-

button menu (started with B3) shows the possible data transfer functions:

'backup' to copy firmware, configurations, user application, and user data files from the

PCMM to SD card.

'restore' to load firmware, configuration, user application, and user data files from SD card

to PCMM.

16 Kollmorgen | kdn.kollmorgen.com | February 2018

1.6.5 Service Interface (X32)

Operating, position control, and motion-block parameters can be set up by using the setup

software on an ordinary commercial PC.

Pin Signal Pin Signal

1 Transmit + 5 n.c.

2 Transmit - 6 Receive-

3 Receive+ 7 n.c.

4 n.c. 8 n.c.

Protocol Type

Modbus TCP Service Bus

Ethernet TCP/IP Service Bus

Connect the service interface (X32) of the PCMM to an Ethernet interface on the PC directly

or via a network hub/switch, while the supply to the equipment is switched off. Use

standard Cat. 5 Ethernet cables for connection (in some cases crossover cables will also

work).

Do not connect the motion bus cable to the service interface X32. The motion bus cable

must be connected to X6.

Confirm that the link LED on the PCMM (the green LED on the RJ45 connector) and on your

PC (or network Hub/Switch) are both illuminated. If both lights are illuminated, then you have

a good electrical connection.

Connector LED# Color Name Indication

X32 LED1 Green Link On = receive signal valid

LED2 Yellow Activity Blink = Transmit or Receive packet

Possible Network Configurations

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 17

PCMM Installation Manual | 1 English

1.6.6 Motion Bus Interface (X6)

Pin Signal

1 Receive+

2 Receive-

3 Transmit +

4, 5 n.c.

6 Transmit -

7, 8 n.c.

Do not connect the Ethernet service cable for the PC to the motion bus interface X6. The Eth-

ernet service cable must be connected to X32.

Connector LED# Color Name Indication

X6 LED3 Green Link On = receive signal valid

LED4 Yellow Activity Blink = Transmit or Receive packet

1.6.7 Rotary Switch (RS1)

You can use the rotary switch RS1 to set the IP address of the PCMM. The configured IP

address (depending on the current rotary switch RS1 position) will be displayed on the 7 seg-

ment at Ethernet cable connection time and at power-on, if an Ethernet cable is connected. If

no Ethernet cable is connected, no IP address will be indicated in the display.

Rotary Switch Setting PCMM IP Address

0 DHCP/AutoIP address. The IP address of the device is obtained

from the DHCP server on your network. If no DHCP server is

found the IP addresses is an AutoIP address (it is internally gen-

erated following the AutoIP protocol and will be of the form

169.254.xx.xx).

1 Static IP Address. The IP address is software configurable from a

web-browser. The default IP address at switch position 1 is

192.168.1.101. To configure the IP address, open a web browser

and type the IP address in the URL box. The PCMM web page will

appear. Navigate to the Settings tab and then the Network tab to

configure the static IP address for the PCMM.

2 to 9 Static IP Address. The IP address is 192.168.0.10n, where n is the

number from the rotary switch. This setting generates addresses in

a range from 192.168.0.102 to 192.168.0.109. Example:if RS1 is

set to 5 – the IP address is 192.168.0.105

The PC subnet mask must be set to 255.255.255.0 or 255.255.255.128

18 Kollmorgen | kdn.kollmorgen.com | February 2018

Static IP addressing

When connecting the PCMM directly to a PC, static IP addressing must be used. Set rotary

switch RS1 to a number from 2 to 9 (see table above)

Dynamic IP addressing (DHCP and Auto-IP)

With RS1 set to 0, the PCMM is in DHCP mode. The PCMM will acquire its IP address from

an external DHCP server if present in the network. If a DHCP server is not present, the

device will assume an Automatic Private IP Address of the form 169.254.x.x.

If your PC is directly connected to the device, and set to obtain an IP address automatically

in the TCP/IP settings, a connection will be established with both devices using compatible

automatic generated addresses. It can take up to 60 seconds for a PC to configure an Auto-

matic Private IP Address (169.254.x.x).

Changing the IP address

If the switch is altered while 24 V Logic power is supplied to the PCMM, you must switch off

and then switch on again the 24 V supply voltage. This action will reset the address.

PCMM Installation Manual | 1 English

Kollmorgen | kdn.kollmorgen.com | February 2018 19

PCMM Installation Manual | 1 English

1.7 Setup

1.7.1 Important Notes

Before testing and setup, the manufacturer of the machine must generate a risk assessment

for the machine and take appropriate measures so that unforeseen movements cannot

cause injury or damage to any person or property.

Only professional personnel with extensive knowledge in the fields of electrical engineering

and drive technology are allowed to test and set up the device.

Sets of data that have been stored on data media are not safe against unintended alteration

by other persons. Unexpected move could be the result if you use unchecked data. After

loading a set of data you must therefore always check all parameters before enabling the

device.

1.7.2 Setup with KAS IDE

The controller and drives must be adapted to the requirements of your machine. For most

applications, you can use a PC and KAS IDE software ("Kollmorgen Automation Suite Integ-

rated development environment) to set up the operating conditions and parameters for your

motion system. The PC is connected to the PCMM by an Ethernet cable.

The KAS IDE integrated development environment contains tools for configuring the Ether-

CAT Network, setup and tuning Kollmorgen drives, creating a PLC program, and creating an

HMI.

The KAS IDE is available by DVD or electronic delivery. Please contact your Kollmorgen

sales representative for information. The PCMM Runtime is available from the KDN

(http://kdn.kollmorgen.com) or Kollmorgen Website (http://www.kollmorgen.com).

Kollmorgen offers training and familiarization courses.

See "KAS getting started" guide for proceeding with setup.

1.8 Troubleshooting the PCMM

Motion Controller problems occur for a variety of reasons, depending on the conditions in your

installation. The causes of faults in multi-axis systems can be especially complex. If you can-

not resolve a fault or other issue using the troubleshooting guidance presented below, cus-

tomer support can give you further assistance.

The most common faults are listed in Chapter "Fault and Warning Messages" (➜ # 137).

More details on the removal of faults can be found in the online help.

20 Kollmorgen | kdn.kollmorgen.com | February 2018

Страница загружается ...

Kollmorgen PCMM Инструкция по установке

Это руководство также подходит для

Kollmorgen PCMM Инструкция по установке

на других языках

Похожие модели бренда

Модели других брендов