Saeco Incanto HD8916 Руководство пользователя

Register your product and get support at

www.saeco.com/welcome

Type HD8917, HD8916

EnglisH

Русский

HD8917-HD8916_4219_460_2550_2_BOOKLET_A5_bl_FRONTCOVER.indd 1 27/01/16 16:54

English 5

Русский 38

ESPRESSO CAPPUCCINO

ESPRESSO LUNGO LATTE MACCHIATO

AROMA STRENGTH MENU

19

20

10

9

2

1

3

4

8

7

6

32

30

16

25

26

27

28

37

38

34

12

13

11

17

33

31

22

5

3635

18

15 14

21

29

23 24

1

English

Contents

Introduction 6

Important 6

Warning 6

Caution 7

Electromagnetic fields (EMF) 7

Machine overview 8

The user interface 8

First installation 9

Manual rinsing cycle 12

Hot water circuit rinsing 12

Coffee brewing circuit rinsing 12

AquaClean filter 13

Preparing and installing the AquaClean filter 13

Activating the AquaClean filter 13

Replacing the AquaClean filter 14

Measuring the water hardness 15

Beverage types and lengths 16

Brewing coffee 16

Adjusting the coffee dispensing spout 16

Brewing coffee with beans 17

Brewing 1 cup of coffee 17

Brewing 2 cups of coffee 17

Brewing coffee with pre-ground coffee 17

Brewing milk-based beverages 17

How to use the milk carafe 17

Brewing milk-based coffee beverages and milk froth 18

Special drinks 19

How to select special drinks 19

Dispensing hot water 19

Inserting and removing the hot water dispensing spout 19

Dispensing hot water 19

Adjusting quantity and taste 20

Saeco Adapting System 20

Adjusting coffee and milk length 20

Adjusting coffee strength 20

Adjusting the grinder settings 21

Maintenance and care 21

Cleaning the drip tray and the coffee grounds container 21

Cleaning the brew group 22

Monthly lubrication of the brew group 25

Cleaning the milk carafe 25

Descaling procedure 28

5

English

What to do if the descaling procedure is interrupted 30

Warning icons and error codes 30

Meaning of error codes 31

Troubleshooting 32

Demo mode function 36

Ordering accessories Saeco 36

Technical specifications 36

Recycling 37

Guarantee and support 37

Introduction

Dear customer, we thank you for buying the Saeco Incanto full-automatic

espresso machine!

Coffee is a natural product and its characteristics may vary according to

origin, blend and roasting. The machine is equipped with a self-adjustment

system that allows it to get the best taste out of your favorite coffee beans.

It regulates itself after brewing 10-20 coffees.

In this user manual you find all the information you need to install, use,

maintain and get the best out of your machine. To fully benefit from the

support that Saeco offers, please register your product at

www.philips.com/welcome.

Important

Warning

-

Connect the machine to a wall socket with a voltage matching the

technical specifications of the machine.

-

Connect the machine to an earthed wall socket.

-

Do not let the power cord hang over the edge of a table or counter, or

touch hot surfaces.

-

Never immerse the machine, mains plug or power cord in water (danger

of electrical shock).

-

Do not pour liquids on the power cord connector.

-

Never direct the hot water jet towards body parts: danger of burns.

-

Do not touch hot surfaces. Use handles and knobs.

-

Switch off the machine with the main switch located on the back and

remove the mains plug from the socket:

-

If a malfunction occurs.

-

If the machine will not be used for a long time.

-

Before cleaning the machine.

-

Pull on the plug, not on the power cord.

-

Do not touch the mains plug with wet hands.

-

Do not use the machine if the mains plug, the power cord or the machine

itself is damaged.

6

English

-

Do not make any modifications to the machine or its power cord.

-

Only have repairs carried out by a service center authorized by Philips to

avoid a hazard.

-

The machine should not be used by children younger than 8 years old.

-

This machine can be used by children aged from 8 years and above and

by persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or

instruction concerning use of the machine in a safe way and if they

understand the hazards involved.

-

Cleaning and user maintenance shall not be made by children unless

they are older than 8 and supervised.

-

Keep the machine and its cord out of the reach of children aged less than

8 years.

-

Children should be supervised to ensure that they do not play with the

machine.

-

Never insert fingers or other objects in the coffee grinder.

Caution

-

This machine is intended for normal household use only. It is not

intended for use in environments such as staff kitchens of shops, offices,

farms or other work environments.

-

Always put the machine on a flat and stable surface. Keep it in upright

position, also during transport.

-

Do not place the machine on a hotplate or directly next to a hot oven,

heater or similar source of heat.

-

Only put roasted coffee beans in the bean hopper. If ground coffee,

instant coffee, raw coffee beans or any other substance is put in the

coffee bean hopper, it may cause damage to the machine.

-

Let the machine cool down before inserting or removing any parts. The

heating surfaces may retain residual heat after use.

-

Never fill the water tank with warm, hot or sparkling water, as this may

cause damage to the water tank and the machine.

-

Never use souring pads, abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the machine. Simply use a soft cloth

dampened with water.

-

Descale your machine regularly. The machine indicates when descaling is

needed. Not doing this will make your appliance stop working properly.

In this case repair is not covered under your guarantee.

-

Do not keep the machine at temperatures below 0°C.Water left in the

heating system may freeze and cause damage.

-

Do not leave water in the water tank when the machine is not used over

a long period of time. The water can be contaminated. Use fresh water

every time you use the machine.

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and

regulations regarding exposure to electromagnetic fields.

7

English

Machine overview

1 User interface

2 ESPRESSO button

3 ESPRESSO LUNGO button

4 AROMA STRENGTH button

5 Standby button

6 MENU button

7 LATTE MACCHIATO button

8 CAPPUCCINO button

9 Protection cover

10 Adjustable coffee dispensing spout

11 Lid of the water tank

12 Lid of the bean hopper

13 Lid of the pre-ground coffee compartment

14 Main switch

15 Socket for cord

16 Service door

17 Drip tray release button

18 Milk froth dispensing spout

19 Lid of the milk carafe

20 Top of the milk carafe

21 Milk carafe

22 Water tank

23 Grinder adjustment knob

24 Cord

25 Water hardness tester

26 Grease

27 Cleaning brush

28 Multifunctional tool (measuring scoop, grinder adjustment key and coffee

duct cleaning tool)

29 Brew group

30 Inside of maintenance door with cleaning instructions

31 Coffee exit duct

32 Coffee residues drawer

33 Drip tray full indicator

34 Coffee grounds container

35 Drip tray cover

36 Drip tray

37 Hot water dispensing spout

38 Opening for hot water dispensing spout

The user interface

Use these buttons to navigate through the menus:

ESPRESSO

ESPRESSO button=ESC button:press this button to return to the main menu.

8

English

AROMA STRENGTH

AROMA STRENGTH button=OK button:press this button to select, confirm or

stop a function.

CAPPUCCINO

CAPPUCCINO button=UP button:press this button to scroll up through the

display menu.

MENU

MENU button=DOWN button:press this button to scroll down through the

display menu.

First installation

This machine has been tested with coffee. Although it has been carefully

cleaned, there may be some coffee residues left. We guarantee, however,

that the machine is absolutely new. new.Like with most full-automatic

machines, you first need to brew some coffees to enable the machine to

complete its self-adjustment and get the best tasting coffee.

1 Remove all packaging material from the machine.

2 Place the machine on a table or worktop away from the tap, the sink and

heat sources.

15 cm

Note: Leave at least 15 cm of free space above, behind and on both sides

of the machine.

M

AX

CALC

CLEAN

MAX

3 Fill the water tank with fresh water to the MAX level indication.

9

English

4 Open the lid of the bean hopper. Fill the bean hopper with coffee beans

and close the lid.

Note: Do not overfill the bean hopper to avoid damage to the grinder.

Caution: Only use espresso beans. Never use ground coffee, unroasted

coffee beans or caramelized coffee beans, as this may cause damage

to the machine.

2

1

5 Insert mains plug into a wall socket (1) and insert the small plug into the

socket located on the back of the machine (2).

6 Set the main switch to the ON position to switch on the machine.

The standby button flashes.

7 Press the standby button to switch on the machine.

8 Insert the hot water dispensing spout.

10

English

-

The display shows the circuit priming icon to indicate that you have to

prime the circuit.

9 Place a container under the hot water dispensing spout. Press the OK

button to start the water circuit priming cycle. The machine reminds you

have to insert the water spout, press the OK button.

-

The machine starts dispensing hot water.

-

The display shows the priming icon. The progress bar shows the

progress of the priming cycle.

10 The machine heats up and the display shows the temperature icon.

11 Empty the container and place it under the coffee dispensing spout.

12 The machine starts rinsing water through the coffee dispensing spout.

The display shows the rinsing icon and a progress bar.

Note: Do not interrupt the rinsing cycle.

13 The display asks: AquaClean filter?

Note:If you want to install the AquaClean filter afterwards, press the ESC

button and continue with the manual rinsing cycle. For installation, see

chapter 'AquaClean filter'.

INSTALL

FILTER

14 If you want to install the AquaClean filter, press the OK button. Activation

will take 2 minutes.

-

The display reminds you to install the filter.

15 Remove the AquaClean filter from its packaging. Shake the filter for about

5 seconds.

16 Immerse the AquaClean filter upside down in a jug with cold water and

wait until no more air bubbles come out.

17 Insert the AquaClean filter vertically onto the filter connection. Push the

AquaClean filter to the lowest possible point. Make sure that the filter fits

tightly and the seal is in the right position, to guarantee the best

performance.

18 Fill the water tank with fresh water to the MAX level indication.

11

English

0 / 8

OFF

ON

19 Select ON on the display and confirm the activation by pressing the OK

button.

-

When activation is finished, the display shows a tick to confirm

activation.

-

The machine starts heating up automatically.

-

Then the machine ready screen appears with the AquaClean 100%

icon to indicate that the filter has been installed.

20 Dispense 2 cups (0.5 l) of hot water to complete the activation. Discard

this water. To complete the activation you have to perform both the hot

water circuit rinsing and coffee brewing circuit rinsing.

After installing the AquaClean filter, you do not have to perform the manual

rinsing cycle.

Manual rinsing cycle

During the manual rinsing cycle, fresh water flows through the water and

coffee brewing circuit. This takes a few minutes.

Hot water circuit rinsing

1 Insert the hot water dispensing spout (if it is not installed) and place a

container under the hot water dispensing spout.

MENU

HOT

WATER

2 Press the MENU button. Select the DRINKS function, confirm and scroll

the menu to select the HOT WATER function. Press the OK button to

confirm.

-

The display reminds you to install the hot water dispensing spout,

press the OK button to confirm.

-

The machine starts dispensing hot water.

Note: To interrupt the rinsing cycle, press the OK button.

3 When the machine has dispensed 2 cups of hot water (0.5 l) press the OK

button to stop the hot water dispensing. Repeat steps 1 to 3 twice.

Coffee brewing circuit rinsing

1 Place a container under the coffee dispensing spout.

GROUND COFFEE

2 Press the AROMA STRENGTH button and select the pre-ground coffee

brewing function.

Note: Do not add pre-ground coffee in the pre-ground coffee

compartment.

3 Press the ESPRESSO LUNGO button.

-

The machine starts dispensing water from the coffee dispensing

spout.

4 Wait until the machine stops dispensing water and empty the container.

5 Repeat steps 1 to 4 twice.

6 When the machine has returned to the main menu, empty the

container.The machine is ready for use

12

English

AquaClean filter

The AquaClean filter is designed to reduce limescale deposits in your coffee

machine and provide filtered water to preserve the aroma and flavor of each

cup of coffee. If you use a series of 8 Aquaclean filters as indicated in this

user manual, you don't have to descale your machine for 5000 cups (with a

capacity of 100 ml).

Note: Your machine has to be completely limescale-free before you start to

use the AquaClean filter. If you did not activate the filter upon first use and

brewed more than 50 cups (with 100 ml capacity), you need to descale the

machine before you activate the filter.

Note: Replace the AquaClean filter when the filter icon starts flashing on the

display. Replace the AquaClean filter at least every 3 months, even if the

machine has not yet indicated that replacement is required.

Preparing and installing the AquaClean filter

1 Remove the AquaClean filter from its packaging. Shake the filter for about

5 seconds.

2 Immerse the AquaClean filter upside down in a jug with cold water and

wait until no more air bubbles come out.

3 Insert the AquaClean filter vertically onto the filter connection. Push the

AquaClean filter to the lowest possible point. Make sure that the filter fits

tightly and the seal is in the right position, to guarantee the best

performance.

Activating the AquaClean filter

You can install the AquaClean filter at first installation as part of the

installation procedure. If you skipped installation of the AquaClean filter at

first use, you can install it by entering the menu as described below.

1 Press the MENU button, select MENU and press the OK button to

confirm. Scroll to 'AquaClean' filter. Press the OK button to confirm.

13

English

0 / 8

80%

NEW?

-

The display shows the number of AquaClean filters that have been

installed previously from 0 to 8 filters.

0 / 8

ON

OFF

2 Select ON on the display, press the OK button to confirm.

0 / 8

WATER

FILTER

3 The display automatically updates the number of filters used.

-

Then the machine ready screen appears with the AquaClean 100%

icon to indicate that the filter has been installed.

4 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard

this water.

Replacing the AquaClean filter

Replace the AquaClean filter when the filter icon starts flashing on the

display. Replace the AquaClean filter at least every 3 months, even if the

machine has not yet indicated that replacement is required.

1 Take out the AquaClean filter. Follow the steps in section 'Preparing and

installing the AquaClean filter'.

1 / 8

80%

NEW?

2 Press the MENU button, select MENU and press the OK button to

confirm. Scroll to 'AquaClean' filter. Press the OK button to confirm.

1 / 8

WATER

FILTER

3 Select ON on the display and confirm the activation by pressing the OK

button.

4 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard

this water.

Replacing the filter after 8 filters were used

1 When the filter icon starts flashing on the display, press the MENU

button, select MENU and press OK to confirm. Scroll to 'AquaClean' filter.

Press OK to confirm.

14

English

DESCALE BEFORE

ACTIVATING FILTER

-

The display tells you that you need to descale the machine before

activating the new filter.

2 Press the OK button to start the descaling procedure. See chapter

'Descaling procedure'.

-

Press the ESC button several times to leave the filter menu if you do

not want to descale right away.

3 At the end of the descaling procedure, the display asks you if you want

to install the AquaClean filter.

-

Follow the steps in 'Replacing the AquaClean filter'.

Measuring the water hardness

To be able to adjust the machine settings to the water in your region, please

measure the water hardness with the water hardness strip supplied.

1 Immerse the water hardness test strip (supplied with the machine) in tap

water for 1 second.

2 Remove the water hardness strip and and wait for 1 minute.

1

2

3

4

3 Check how many squares have changed into the red colour and check

the water hardness in below table.

numbers of red squares

value to be set water hardness

1 1 very soft water

2 2 soft water

3 3 hard water

4 4 very hard water

Setting the water hardness

1 To set the water hardness, press the MENU button, select menu and

scroll to select WATER HARDNESS.

15

English

2 Press the OK button and select the water hardness in your area.

3 Press the OK button to confirm.

4 Press the ESC button to return to the main menu.

Beverage types and lengths

Beverage name

Description How to select

Espresso Coffee with thick crema served in

a small cup

Button on control panel

Espresso Lungo A longer espresso with thick

crema served in a medium-sized

cup

Button on control panel

Cappuccino 1/3 espresso, 1/3 hot milk and 1/3

milk foam served in a large cup

Button on control panel

Latte Macchiato Long shot of hot milk with foam

stained with a shot of espresso

and served in a tall glass

Button on control panel

Frothed milk Hot milk with foam Special Drinks menu

Hot Water Special Drinks Menu

Beverage name

Standard length Length range

Espresso 40 ml 20 - 230 ml

Espresso Lungo 80 ml 20 - 230 ml

Hot water 300 ml 50 - 450 ml

Brewing coffee

Adjusting the coffee dispensing spout

The machine can be used to dispense different coffee types in cups or

glasses of different sizes. To adjust the height of the coffee dispensing spout

to the size of the cup or glass, slide the spout up or down.

16

English

Brewing coffee with beans

Brewing 1 cup of coffee

1 Place a cup under the coffee dispensing spout.

2 Press the ESPRESSO or ESPRESSO LUNGO button to brew the selected

coffee.

-

Coffee starts pouring from the coffee dispensing spout.

Note: If you want to stop the brewing process before the machine has

finished dispensing the preset coffee volume, press the OK button.

Brewing 2 cups of coffee

1 Place two cups under the coffee dispensing spout.

2 You can brew two cups of espresso or espresso lungo simultaneously.

Press the button of the desired beverage twice. The machine

automatically carries out two grinding cycles in sequence.

Brewing coffee with pre-ground coffee

When you brew coffee with pre-ground coffee, use the measuring scoop in

the multifunctional tool supplied to put the correct dose in the pre-ground

coffee compartment. If you add more pre-ground coffee, the excess coffee

will end up in the coffee grounds drawer.

1 Open the lid of the pre-ground coffee compartment.

2 Pour one measuring scoop of pre-ground coffee into the compartment.

Caution: Do not put any other substance than pre-ground coffee in the

pre-ground coffee compartment, as this may damage the machine.

3 Close the lid of the pre-ground coffee compartment.

4 Place a cup under the coffee dispensing spout.

5 Press the AROMA STRENGTH button and select pre-ground coffee

-

The machine automatically starts brewing the selected beverage.

Note: You can only brew one coffee beverage at a time with pre-ground

coffee.

Brewing milk-based beverages

The milk carafe is used to froth milk and brew milk-based coffee beverages.

How to use the milk carafe

Note: Before first use, rinse the milk carafe as described in chapter

'Maintenance and care', section 'Cleaning the milk carafe'.

Caution: Steam and hot milk may spray out of the milk froth dispensing

spout at the start of the brewing cycle.

Caution: Make sure that the milk carafe is installed and the milk froth

dispensing spout is open before you select a milk-based coffee beverage

or milk froth.

17

English

1

2

1 If the hot water dispensing spout is installed, press the release buttons on

both sides of the hot water dispensing spout (1) and remove it (2).

2 Remove the milk carafe lid.

3 Fill the milk carafe with milk between the MIN and MAX level indications.

Note: Use cold milk (at a temperature of approximately 5°C/41°F) with a

protein content of at least 3% to ensure an optimal frothing result. You

can use whole milk or semi-skimmed milk. It is also possible to use

skimmed milk, soy milk and lactose-free milk.

4 Slightly tilt the milk carafe and insert it into the guides of the machine.

Then push the bottom of the carafe towards the machine until it locks

onto the drip tray.

5 Pull out the milk froth dispensing spout completely to the right to froth

dispensing position.

Note: If the milk froth dispensing spout is not pulled out fully, the milk

carafe does not froth milk properly.

Brewing milk-based coffee beverages and milk froth

1 Place a cup under the open milk froth dispensing spout.

2 Choose your milk-based beverage.

-

Press the CAPPUCCINO button to brew a cappuccino.

-

Press the LATTE MACCHIATO button to brew a latte macchiato.

-

Press the MENU button, choose 'Drinks' and scroll down through the

drinks to select milk froth.

-

The machine reminds you have to install the milk carafe and pull out

the milk froth dispensing spout.

3 The machine first dispenses a preset quantity of frothed milk into the cup

or glass and then dispenses a preset quantity of coffee.

18

English

-

To stop dispensing milk or coffee, press the OK button.

4 After brewing milk-based coffee beverages, the display asks you if you

want to perform a quick clean of the milk carafe spout. You have 10

seconds to perform the quick clean.You can perform the quick clean

while leaving the milk inside the milk carafe. Remove the cup with the

beverage and place a container under the milk froth dispensing spout.

Press the OK button twice to confirm that you want to quick clean, or

press the ESC button to perform the quick clean later. It is recommended

to perform quick clean at least once a day, see chapter 'Cleaning the milk

carafe'.

Special drinks

How to select special drinks

1 Press the MENU button and select 'Drinks'.

2 Press the OK button to confirm.

3 Scroll the menu and select the desired beverage.

Dispensing hot water

Inserting and removing the hot water dispensing spout

To insert the hot water dispensing spout:

1 Tilt the hot water dispensing spout slightly and insert it into the machine.

2 Press and turn the hot water dispensing spout downwards to lock it in the

machine.

To remove the hot water spout:

1

2

1 Press the release buttons on the sides of the hot water dispensing spout

to unlock it.

2 Lift the hot water dispensing spout slightly and pull it out of the machine.

Dispensing hot water

Caution: Steam and hot water may spray out of the hot water dispensing

spout when brewing starts. Wait until the cycle has ended before

removing the hot water dispensing spout.

1 Press the MENU button. Select 'Drinks', confirm and scroll to select 'Hot

water'.

19

English

Страница загружается...

Saeco Incanto HD8916, Incanto HD8917 Руководство пользователя

Похожие модели бренда

Модели других брендов