EN User manual 1
KK Қолданушының нұсқасы 21
RU Руководство пользователя 41
76 FA
90 AR
© 2017 Koninklijke Philips N.V.
All rights reserved.
4241 210 95971
1
2
2
C
B
I
K
J
L
M
A
H
G
F
E
D
Control buttons
Display panel
AC3821
3S
3S
1
3 4 5 6
10
98
7
11 12 13 14
22
20
19
18
171615
21
1
2
2 hours
3S
23
24 25 26
27 28 29
30
31 32 33 34
35 36 37
38
39
40 41
42
43 44
45 46
47 48 49
50
1
2
1
2
51 52 53
1
EN
English
Contents
1 Important 2
Safety 2
2 You air purier 5
Product overview (g a) 6
Controls Overview (g b) 6
3 Get started 7
Installing the NanoProtect
lter 7
Preparing for humidication 7
4 Use the appliance 8
Understanding the air
quality light 8
Switching on and o 8
Setting the humidity level 8
Switching the operation
mode 9
Using the light on/o function 9
Switching the display mode 9
Changing the Auto mode
setting 10
Changing the fan speed 10
Setting the timer 10
Setting the child lock 11
Water level 11
5 Cleaning 11
Cleaning schedule 11
Cleaning the body of the
appliance 12
Cleaning the air quality
sensor 12
Cleaning the water tank,
water tray and NanoCloud
rotary humidication wick 12
Cleaning the pre-lter 13
Descaling the NanoCloud
rotary humidication wick 13
6 Replace the lter and wick 14
Understanding the healthy
air protect lock 14
Replacing the NanoProtect
lter 14
Replacing the NanoCloud
rotary humidication wick 15
Replacing the anti-bacteria
cartridge 16
7 Troubleshooting 17
8 Guarantee and service 19
Order parts or accessories 19
9 Notices 19
Electromagnetic elds (EMF) 19
Recycling 20
2 EN
1 Important
Safety
Read this user manual carefully before
you use the appliance, and save it for
future reference.
Danger
• Do not let water or any
other liquid or flammable
detergent enter the
appliance to avoid electric
shock and/or a fire
hazard.
• Do not clean the
appliance with water,
any other liquid, or a
(flammable) detergent to
avoid electric shock and/
or a fire hazard.
• Do not spray any
flammable materials
such as insecticides or
fragrance around the
appliance.
• The water in the water
tank is not suitable for
drinking. Do not drink this
water and do not use it to
feed animals or to water
plants. When you empty
the water tank, pour the
water down the drain.
Warning
• Check if the voltage
indicated on the
side of the appliance
corresponds to the local
power voltage before you
connect the appliance.
• If the power cord is
damaged, you must have
it replaced by Philips, a
service center authorized
by Philips, or similarly
qualified persons in order
to avoid a hazard.
• Do not use the appliance
if the plug, the power
cord, or the appliance
itself is damaged.
• This appliance can be
used by children aged
from 8 years and above
and persons with reduced
physical, sensory or
mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved.
3
EN
English
• Cleaning and user
maintenance shall not be
made by children without
supervision.
• Children should be
supervised to ensure that
they do not play with the
appliance.
• Do not block the air inlet
and outlet, e.g. by placing
items on the air outlet or
in front of the air inlet.
Caution
• This appliance is not
a substitute for proper
ventilation, regular
vacuum cleaning, or use
of an extractor hood or
fan while cooking.
• If the power socket used
to power the appliance
has poor connections,
the plug of the appliance
becomes hot. Make
sure that you plug the
appliance into a properly
connected power socket.
• Always place and use the
appliance on a dry, stable,
level, and horizontal
surface.
• Leave at least 20cm free
space behind and on both
sides of the appliance
and leave at least 30cm
free space above the
appliance.
• Do not place anything on
top of the appliance.
• Do not place the
appliance directly below
an air conditioner to
prevent condensation
from dripping onto the
appliance.
• Make sure all filters
are properly installed
before you switch on the
appliance.
• Only use the original
Philips filters specially
intended for this
appliance. Do not use any
other filters.
• Avoid knocking against
the appliance (the air inlet
and outlet in particular)
with hard objects.
• Do not insert your fingers
or objects into the air
outlet or the air inlet to
prevent physical injury
or malfunctioning of the
appliance.
4 EN
• Do not use this appliance
when you have used
indoor smoke-type insect
repellents or in places
with oily residues, burning
incense, or chemical
fumes.
• Do not use the appliance
near gas appliances,
heating devices or
fireplaces.
• Always unplug the
appliance after use
and before filling water,
cleaning, or carrying out
other maintenance.
• Do not use the appliance
in a room with major
temperature changes.
• To prevent interference,
place the appliance
at least 2m away from
electrical appliances that
use airborne radio waves
such as TVs, radios, and
radio-controlled clocks.
• When the appliance is
not used for a long time,
bacteria may grow on the
filters. Check the filters
after a long period of
disuse. If the filters are
very dirty, replace them
(see the chapter "Replace
the filter and wick").
• The appliance is only
intended for household
use under normal
operating conditions.
• Do not use the appliance
in wet surroundings or in
surroundings with high
ambient temperatures,
such as the bathroom,
toilet, or kitchen.
• The appliance does
not remove carbon
monoxide (CO) or
radon (Rn). It cannot be
used a safety device in
case of accidents with
combustion processes
and hazardous chemicals.
• Only fill the water tank
with cold tap water. Do
not use ground water or
hot water.
• Do not put any substance
other than water in the
water tank. Do not put
fragrance in the water
tank.
• If you do not use the
humidification function
for a long time, clean
the water tank and
NanoCloud rotary
humidification wick tray,
and air dry the NanoCloud
rotary humidification wick.
5
EN
English
• If you need to move the
appliance, disconnect the
appliance from the power
supply first. Then empty
or remove the water tank
and water tray. Carry the
appliance horizontally by
the handles on both sides
of the appliance.
• Unplug the appliance
during filling and cleaning.
2 You air purifier
Congratulations on your purchase, and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.Philips.com/welcome.
The Philips air purifier brings fresh,
humidified air to your house for the
health of your family. It offers you
advanced evaporation system with
NanoCloud technology, using a special
humidification filter which adds H2O
molecules to the dry air, and produces
healthy humid air without formation
of water mist. Its humidification filter
retains bacteria, calcium and other
particles from the water. It delivers only
pure humidified air in your home. No
more dry air in the winter season or
from the air conditioning.
Read this user manual carefully before
you use the appliance, and save it for
future reference.
6 EN
Controls Overview
(fig b)
Control buttons
Power on/off button
Child lock button
Auto mode button
Fan speed button
Humidity setting button
Light dimming button
2-in-1 mode on/off button
Timer/Reset button
Display panel:
Sleep mode
Auto mode
Allergen mode
Purification ONLY mode
2-in-1 mode
Filter replacement alert
Water refill alert
Pre-filter and wick cleaning alert
PM2.5 display
Indoor Allergen Index display
Product overview (fig a)
A Control panel
B Water tank
C Anti-bacteria cartridge
D Wick support
E Water tray
F Omni wheels
G Wick wheel
H
NanoCloud rotary humidification
wick (FY3435)
I Back side cover
J Pre-filter
K
NanoProtect filter Series 3
(FY2422)
L
NanoProtect filter Active Carbon
(FY2420)
M Air outlet
7
EN
English
Preparing for
humidification
1 Pull out the water tank (fig j).
2 Lift the water tray upwards and pull
it out horizontally (fig k).
3 Remove all packaging material
of the NanoCloud rotary
humidification wick (fig l).
Note
• The humidification wick has been
assembled on the wick wheel upon
purchase.
4 Place the wick wheel on the wick
support (fig m).
Note
• When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
5 Place the water tray back into the
appliance (fig n).
6 Turn the top cap of the water tank
anti-clockwise to unscrew it
(fig o).
7 Fill the water tank with cold tap
water (fig p).
8 Turn the top cap clockwise to tightly
lock it onto the water tank (fig q).
9 Place the water tank back into the
appliance (fig r).
3 Get started
Installing the
NanoProtect filter
The appliance comes with the
NanoProtect filter fitted inside. Remove
the packaging of the filter before using
the appliance and place it back into the
appliance described as follows:
Note
• Make sure that the side with the tag
is pointing towards you.
1 Pull the top part of the back panel
towards you to release it from the
appliance (fig c).
2 Press the two clips down and pull
the pre-filter towards you (fig d).
3 Remove the NanoProtect filter from
the appliance (fig e).
4 Remove all packaging materials of
the NanoProtect filter (fig f).
5 Place the NanoProtect filter back
into the appliance (fig g).
6 Put the pre-filter back into the
appliance, mount the pre-filter onto
the bottom of the appliance first,
and then push the clips on the top
of pre-filter against the appliance
(fig h).
7 To reattach the back cover, mount
the panel onto the bottom of the
appliance first, and then push
the top of the panel against the
appliance (fig i).
8 EN
4 Use the
appliance
Understanding the air
quality light
IAI
level
Air quality
light color
Air quality
level
1-3 Blue
Good
4-6 Blue-Purple
Fair
7-9 Purple-Red
Poor
10-12 Red
Very poor
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.
Switching on and off
1 Put the plug in the power socket.
» The appliance beeps.
2 Touch to switch on the
appliance.
» The appliance operates under
the 2-in-1 mode by default with
displayed on the screen.
» When the appliance is warming
up, " " displays on the
screen. After measuring the
particulate matter only in the
air, the appliance shows the IAI
level and operates in the auto
mode by default.
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
3 Touch and hold for 3 seconds to
switch off the appliance.
Note
• After the appliance is switched
off by the on/off button , if the
plug is still in the power socket, the
appliance will operate under the
previous settings when it is switched
on again.
Setting the humidity
level
1 Touch the humidity button
repeatedly to set the desired air
humidity to 40%, 50%, 60% or " "
(fig s).
Note
• When the humidity level " " is
chosen, the appliance will keep
humidifying the room until the
ambient humidity level reaches
70%RH.
• When the target humidity level is
reached, the wick wheel will stop
rotating. It will start rotating again
when the humidity drops below the
target level.
• If you want to increase the humidity
level quickly, you can select a
higher fan speed.
9
EN
English
Switching the operation
mode
The appliance has two operation
modes, the purification ONLY mode and
the 2-in-1 mode.
• Touch the 2-in-1 mode on/off
button repeatedly to switch
between the purification ONLY
mode and the 2-in-1 mode (fig t).
» displays on the screen when
the appliance operates in the
purification ONLY mode.
» displays on the screen when
the appliance operates in the
2-in-1 mode.
Using the light on/off
function
With the light dimming button, you can
switch on or off the air quality light,
the display screen and the function
indicator if desired.
1 Touch the light dimming button
once, the air quality light will be
dimmed.
2 Touch the light dimming button
again, the air quality light and the
display panel will be turned off.
3 Touch the light dimming button
for the third time, all lights will be on
again.
Switching the display
mode
The appliance has three display modes,
PM2.5 display, IAI display and humidity
level display.
PM2.5
AeraSense sensing technology
accurately detects and quickly respond
to even the slightest particle change in
the air. It provides you with reassurance
with real-time PM2.5 feedback.
IAI
The professional-grade AeraSense
sensor detects the level of indoor air
allergen and with numerical feedback
from 1 to 12 the potential risk level of
indoor air allergens can be displayed. 1
indicates best air quality.
Note
• The appliance operates in IAI
display mode by default.
1 Touch and hold for 3 seconds to
switch to PM2.5 display (fig u).
» PM2.5 indicator and the actual
PM2.5 level display on the
screen.
2 Touch and hold for 3 seconds
twice to switch to humidity level
display (fig v).
3 Touch and hold for 3 seconds to
switch to IAI display (fig w).
» IAI indicator and the actual IAI
level display on the screen.
10 EN
Changing the fan speed
There are several fan speeds available.
Manual
• Touch the fan speed button
repeatedly to select the desired fan
speed (1, 2 or 3) (fig {).
Turbo (t)
In Turbo mode, the air purifier operates
on the highest speed.
• Touch the fan speed button to
select the Turbo mode ( ) (fig |).
Setting the timer
With the timer, you can let the
appliance operate for a set number of
hours. When the set time has elapsed,
the appliance will automatically switch
off.
• Touch the Timer/Reset button
repeatedly to choose the number
of hours you want the appliance to
operate (fig }).
» The timer is available from 1 to
12 hours.
• To deactivate the timer function,
touch the Timer/Reset button
repeatedly until "---" displays on
the screen.
Changing the Auto mode
setting
You can choose the auto mode ( ),
the Allergen mode ( ) and the sleep
mode ( ).
Auto mode
In Auto mode, the appliance selects
the fan speed in accordance with the
ambient air humidity and air quality.
• Touch the fan speed button to
select Auto mode (fig x).
» Auto ( ) and display on the
screen.
» The appliance operates in Auto
mode by default.
Allergen mode
The extra-sensitive Allergen mode
is designed to react to even a small
change in allergen levels in the
surrounding air.
• Touch the Auto mode button to
select the Allergen mode (fig y).
» Auto ( ) and display on the
screen.
Sleep (SL)
In Sleep mode, the air purifier operates
quietly on a very low speed.
• Touch the Auto mode button
select the Sleep mode ( ).
» Sleep ( ) and display on
the screen (Fig z).
Note
• If no buttons are touched after one
minute, all lights will go off except
.
• You can turn on the lights by
touching any buttons.
11
EN
English
Setting the child lock
1 Touch and hold the child lock
button for 3 seconds to activate
child lock (fig ~).
» displays on the screen for
3 seconds.
» When the child lock is on,
all the other buttons are not
responsive.
2 Touch and hold the child lock
button for 3 seconds again to
deactivate child lock (fig ).
» displays on the screen for
3 seconds.
Water level
The water level in the water tank is
visible through the water level window
on the water tank.
When there is not enough water in
the water tank, the water refill light
flashes to indicate that you have to refill
the water tank (fig €).
Note
• When there is no water in the
water tank, the wick wheel will stop
rotating. When the water tank is
refilled with water, the wick wheel
will start rotating again.
5 Cleaning
Note
• Always unplug the appliance before
cleaning.
• Never immerse the appliance in
water or any other liquid.
• Never use abrasive, aggressive, or
flammable cleaning agents such as
bleach or alcohol to clean any part
of the appliance.
• Only the pre-filter and NanoCloud
rotary humidification wick are
washable. The NanoProtect filter
is not washable nor vacuum
cleanable.
Cleaning schedule
Frequency Cleaning method
When
necessary
Wipe the surface of the
appliance with a soft
dry cloth.
Every week
Rinse the water tank,
the water tray and
the NanoCloud rotary
humidification wick.
When the
cleaning
icon
lights up
and F0
displays on
the screen.
Clean the pre-filter.
Descale the NanoCloud
rotary humidification
wick with the water and
white vinegar (5% acetic
acid) or water and citric
acid.
12 EN
Cleaning the water
tank, water tray and
NanoCloud rotary
humidification wick
Note
• Cleaning the water tank, water
tray and NanoCloud rotary
humidification wick every week to
keep them hygienic.
1 Pull out the water tank (fig j).
2 Lift the water tray upwards and pull
it out horizontally (fig …).
3 Take the wick wheel off the wick
support (fig †).
4 Rinse the water tank, water tray and
NanoCloud rotary humidification
wick under a running tap.
Note
• Do not take the NanoCloud rotary
humidification wick off the wheel
during cleaning.
• Do not scrub the NanoCloud rotary
humidification wick or place it under
direct sunlight.
• If necessary, use a mild detergent to
clean the water tank and water tray.
In this case, rinse the water tank and
water tray thoroughly.
5 Wipe the outside of the water tank
and water tray dry.
6 Place the wick wheel on the wick
support (fig m).
Note
• When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
Cleaning the body of the
appliance
Regularly clean the inside and outside
of the appliance to prevent dust from
collecting.
1 Wipe away dust with a soft dry cloth
from the body of the appliance.
2 Clean the air outlet with a soft dry
cloth.
Cleaning the air quality
sensor
Clean the air quality sensor every
2 months for optimal functioning of the
purifier. Clean them more frequently
if you use the purifier in a dusty
environment.
Note
• When the humidity level in the
room is very high, it is possible that
condensation develops on the air
quality sensor. As a result, the air
quality light may indicate that the
air quality is bad even though it is
good. In this case you have to clean
the air quality sensor or use one of
the manual speed settings.
1 Clean the air quality sensor inlet and
outlet with a soft brush (fig ).
2 Open the air quality sensor cover
(fig ‚).
3 Clean the air quality sensor, the
dust inlet and the dust outlet with a
lightly moistened cotton swab
(fig ƒ).
4 Dry them with a dry cotton swab.
5 Reattach the air quality sensor cover
(fig „).
13
EN
English
7 Place the water tray back into the
appliance (fig n).
8 Place the water tank back into the
appliance (fig r).
Cleaning the pre-filter
Note
• If the pre-filter is damaged, worn or
broken, do not use. Visit
www.philips.com/support or
contact the Consumer Care Center
in your country.
Filter alert light
status
Follow this
F0 displays on the
screen and wick&
pre-filter cleaning
alert goes on
Clean the pre-
filter
1 Pull the top part of the back panel
towards you to release it from the
appliance (fig c).
2 To remove the pre-filter, press the
two clips down and pull the filter
towards you (fig d).
3 Wash the pre-filter under a running
tap. If the pre-filter is very dirty, use
a soft brush to brush away the dust
(fig ‡).
4 Air dry the pre-filter.
Note
• Make sure that the pre-filter is
completely dry. If it is still wet,
bacteria may multiply in it and
shorten the lifetime of the pre-filter.
5 After the pre-filter is completely dry,
place it back into the back panel
(fig h).
6 Touch and hold for 3 seconds to
reset the pre-filter cleaning time.
Descaling the
NanoCloud rotary
humidification wick
Filter alert light
status
Follow this
F0 displays on the
screen and wick&
pre-filter cleaning
alert goes on
Descale the
NanoCloud
rotary
humidification
wick
1 Pull out the water tank (fig j).
2 Lift the water tray upwards and pull
it out horizontally (fig k).
3 Take the wick wheel off the wick
support (fig †).
4 Soak the NanoCloud rotary
humidification wick in cleansing
agent (e.g diluted white vinegar,
Citric acid solution) for two hours
(fig ˆ).
Note
• Please use mid or acid cleanser
• White vinegar (5% acetic acid)
mix with equal amount of water
• 4g citric acid with 4L water
• If there are white deposits
(limescale) on the filter, make sure
that the side with the white deposits
is immersed in the water.
• Do not take the NanoCloud rotary
humidification wick off the wheel
during descaling.
14 EN
6 Replace the
filter and wick
Understanding the
healthy air protect lock
This appliance is equipped with the
healthy air protect lock to make sure
that the Nano protect filter and the
humidification wick are in optimal
condition when the appliance is
operating. When the Nano protect filter
and the humidification wick are almost
expired, the replacement light
flashes and the filter code displays on
the screen (see Filter alert chart).
If you do not replace the filter and
wick in time, the appliance will stop
operating and get locked.
Replacing the
NanoProtect filter
Note
• The air purification filters are not
washable nor vacuum cleanable.
• Always turn off the air purifier and
unplug from the electrical outlet
before replacing the filters.
5 Rinse the NanoCloud rotary
humidificationwick under the tap
to rinse away vinegar or citric acid
residues. During rinsing, turn the
wick so that both front and back are
rinsed (fig.‰).
6 Air dry the NanoCloud rotary
humidification wick (fig Š).
Note
• Do not put the NanoCloud rotary
humidification wick under direct
sunlight.
7 Touch and hold for 3 seconds
to reset the NanoCloud rotary
humidification wick cleaning time.
15
EN
English
Replacing the
NanoCloud rotary
humidification wick
Filter alert light
status
Follow this
F1 is displayed
and the filter
replacement light
flashes on the
screen. (fig )
Replace the
NanoCloud
rotary
humidification
wick
1 Take the wick wheel off the wick
support (fig †).
2 Grip the shaft screw on the
other side of the wheel, rotate it
anticlockwise to release the wick
from the wheel (fig ).
3 Unfasten the locks on the edge
of the wheel successively to
disassemble the wick wheel
(fig ) .
4 Take the used NanoCloud rotary
humidification wick out (fig ).
5 Remove all packaging material
of the new NanoCloud rotary
humidification wick (fig ‘).
6 Place the new NanoCloud rotary
humidification wick in the wick
wheel, and then fasten the locks on
the wick wheel (fig ’).
7 Place the wick wheel on the wick
support (fig m).
Filter alert chart
Filter alert light
status
Follow this
A3 displays on the
screen
Replace
NanoProtect
filter HEPA Series
3 (FY2422)
C7 displays on the
screen
Replace the
NanoProtect
filter Active
Carbon
(FY2420)
A3 and C7 display
on the screen
alternately
Replace both
filters
Replace the NanoProtect filter when
flashes on the screen (fig ‹).
1 Remove the used NanoProtect filter
from the appliance (fig Œ).
Note
• Do not touch the pleated filter
surface, or smell the filter as it has
collected pollutants from the air.
• Wash your hands after disposing of
the used filters.
2 Remove all packaging material of
the new NanoProtect filter (fig f).
3 Place the new NanoProtect filter
into the appliance (fig g).
4 Touch and hold for 3 seconds to
reset the NanoProtect filter lifetime
counter .
16 EN
Note
• When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
8 Place the water tray and water tank
back into the appliance (fig n).
9 Touch and hold for 3 seconds
to reset the NanoCloud rotary
humidification wick lifetime counter.
Replacing the anti-
bacteria cartridge
Replace the anti-bacteria cartridge at
least once a year to prevent bacteria
from growing in the water tray.
1 Slide the anti-bacteria cartridge
horizontally and take it from the
water tray (fig “).
2 Remove all packaging materials of
the new anti-bacteria cartridge
(fig ”).
3 Place the new anti-bacteria
cartridge into the water tray and
push it horizentally into the slot
(fig •).
4 Place the water tracy and water
tank back into the appliance.
5 Touch and hold for 3 seconds
to reset the lifetime counter of the
anti-bacteria cartridge.
17
EN
English
7 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact
the Consumer Care Center in your country.
Problem Possible solution
The appliance
does not work
even though it is
plugged in.
• The filter replacement light has been flashing but you
have not replaced the NanoProtect filter, and the appliance
is now locked. In this case, replace the filter and reset the
filter lifetime counter.
• The water refill light flashes. Make sure the water tank
is properly installed and there is enough water in the water
tank.
The appliance
does not work
even though it is
switched on.
• The appliance is working but the buttons are not responsive.
Check if the child lock is on.
There are
some white
deposits on the
NanoCloud rotary
humidification wick.
• The white deposits are called scale and they consist of
minerals from the water. Scale on the NanoCloud rotary
humidification wick affects the humidifying performance,
however it does not harm your health. Follow the cleaning
instructions in the user manual.
No air comes out of
the air outlet.
• Plug the appliance into the power supply and switch on.
The airflow that
comes out of
the air outlet is
significantly weaker
than before.
• The pre-filter is dirty. Clean the pre-filter (see the chapter
"Cleaning").
• Make sure that you have removed all packaging material of
the NanoProtect filter.
18 EN
Problem Possible solution
It takes a long time
to reach the target
humidity level.
• NanoCloud technology evenly distributes invisible water
vapour into your room. In dry conditions moisture from the
humidifier will be absorbed by walls, furniture, and other
items in your room. Ventilation of dry outside air will also
increase the time it takes to reach the target humidity.
To optimize humidification and purification performance, it's
recommended to close doors and windows during use.
I do not see water
vapor coming out
of the appliance. Is
it working?
• When mist is very fine, it is invisible. The appliance has a
NanoCloud humidification technology, which produces
healthy humid air from the outlet area without formation of
water mist. Therefore, you cannot see the mist.
The appliance
produces a strange
smell.
• The first few times you use the appliance, it may produce
a plastic smell. This is normal. However, if the appliance
produces a burnt smell, contact your Philips dealer or an
authorized Philips service centre.
• The filter may produce smell after being used for a while
because of the absorption of indoor air. Remove the filter
and place it where it has direct sunlight and ventilation for
several hours. Re-install and try using it again. If the odor
remains, please replace the filter.
The appliance is
extra loud.
• You have not removed all packaging material of the filters.
Make sure that you have removed all packaging material.
• Change the fan speed to lower fan speed level.
The appliance still
indicates that I
need to replace a
filter, but I already
did.
• Perhaps you did not touch and hold the Timer/Reset button
correctly. Plug in the appliance, touch to switch on the
appliance, and touch and hold the Timer/Reset button for
3 seconds.
Error codes “E1”,
“E2”, “E3”, “E4”or
“E5” displays on
the screen.
• The appliance has malfunctions. Contact the Consumer Care
Center in your country.
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/
