Yamaha NX-SW10 Руководство пользователя

Бренд: Yamaha

Модель: NX-SW10

Категория: Дополнительное музыкальное оборудование

Тип: Руководство пользователя

Это руководство также подходит для

VS-10

Акустическая система Yamaha NX-SW10 представляет собой многофункциональное устройство, которое вы сможете использовать в качестве сабвуфера, центральной колонки или тыловых динамиков. Благодаря компактным размерам и универсальности размещения система отлично дополнит любой домашний кинотеатр. Качественные динамики обеспечат глубокое звучание низких частот, а стильный дизайн впишется в любой интерьер. NX-SW10 легко интегрируется в любую систему домашнего кинотеатра и станет отличным выбором для любителей качественного звука.

OWNER’S MANUAL

MODE D’EMPLOI

MANUAL DE INSTRUCCIONES

NX-SW10

Subwoofer/Center Speaker/Rear Speakers

Caisson de grave/Enceinte centrale/

Enceintes arriere

UCA

CAUTION

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or

the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the manufac-

turer, or sold with the apparatus. When a

cart is used, use caution when moving the

cart/apparatus combination to avoid injury

from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been

dropped.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert you to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert you to the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

INTRODUCTIOIN

PREPARATIONS

PLAYBACK

SETUP MENU APPENDIX

English

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that lets the

sound come through loud and clear without annoying blaring

or distortion – and, most importantly, without affecting your

sensitive hearing.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by

Yamaha may void your authority, granted by the FCC,

to use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation instruc-

tions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC Regula-

tions, Part 15 for Class “B” digital devices. Compliance

with these requirements provides a reasonable level of

assurance that your use of this product in a residential

environment will not result in harmful interference with

other electronic devices.

This equipment generates/uses radio frequencies and,

if not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If

this product is found to be the source of interference,

which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using

one of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch

(circuit breaker or fuse) circuits or install AC line filter/

In the case of radio or TV interference, relocate/

reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to coaxial type

cable.

If these corrective measures do not produce satisfac-

tory results, please contact the local retailer autho-

rized to distribute this type of product. If you can not

locate the appropriate retailer, please contact Yamaha

Electronics Corp., U.S.A. 6660 Orangethorpe Ave,

Buena Park, CA 90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

IMPORTANT SAFETY INSTRUCTIONS

Since hearing damage from loud sounds is often

undetectable until it is too late, YAMAHA and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume

levels.

IMPORTANT

Please record the serial number of this unit in the space

below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

CAUTION

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install the speakers in a cool, dry, clean place – away

from windows, heat sources, sources of excessive

vibration, dust, moisture and cold. Avoid sources of

humming (transformers, motors). To prevent fire or

electrical shock, do not expose the speakers to rain

or water.

3 To prevent the enclosure from warping or

discoloring, do not place the speakers where they

will be exposed to direct sunlight or excessive

humidity.

4 Do not place the speakers where they are liable to be

knocked over or struck by falling objects. Stable

placement will also ensure better sound

performance.

5 Avoid installing the speakers in a place where foreign

objects and liquid might fall. It might cause a fire,

damage to the speakers and/or personal injury. Do

not place the following objects on the speakers:

• Other components, as they may cause damage and/

or discoloration on the surface of the speakers.

• Burning objects (i.e., candles), as they may cause

fire, damage to the speakers and/or personal injury.

• Containers with liquid in them, as they may cause

an electrical shock to the user and/or damage to the

speakers.

6 Placing the speakers on the same shelf or rack as the

turntable can result in feedback.

7 Any time you note distortion, reduce the volume

control on your amplifier to a lower setting. Never

allow your amplifier to be driven into “clipping”.

Otherwise the speakers may be damaged.

8 As these speakers contain strong magnets (though

all of them are magnetically shielded types), avoid

placing watches, magnetic tapes, etc. near them.

Also, placing the speakers near a TV set may impair

picture color. If this happens, move the speakers

away from the TV set.

9 Do not attempt to clean the speakers with chemical

solvents as this might damage the finish. Use a clean,

dry cloth.

10 Be sure to read the “TROUBLESHOOTING” section

regarding common operating errors before

concluding that the unit is faulty.

11 Secure placement or installation is the owner’s

responsibility.

YAMAHA shall not be liable for any accident caused

by improper placement or installation of speakers.

■ For SW-VS10

12 Never open the cabinet. If something drops into the

set, contact your dealer.

13 Do not use force on switches, controls or connection

wires. When moving the unit, first disconnect the

power plug and the wires connected to other

equipments. Never pull the wires themselves.

14 When not planning to use this unit for a long period

(ie., vacation, etc.), disconnect the AC power plug

from the wall outlet.

15 To prevent lightning damage, disconnect the AC

power plug when there is an electric storm.

16 Since this unit has a built-in power amplifier, heat will

radiate from the rear panel. Place the unit apart from

the walls, allowing enough space above, behind and

on the both sides of the unit to prevent fire or

damage. Furthermore, do not position with the rear

panel facing down on the floor or other surfaces.

Be sure to allow a space of at least 10 cm above,

behind and on both sides of the unit.

17 Super-bass frequencies reproduced by this unit may

cause a turntable to generate a howling sound. In

such a case, move this unit away from the turntable.

18 If you hear distorted noise (i.e., unnatural,

intermittent “rapping” or “hammering” sounds)

coming from this unit, reduce the volume level.

Extremely loud playing of a movie soundtrack’s low

frequency, bass-heavy sounds or similarly loud

popular music passages can damage this speaker

system.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note

The plug severed from the mains lead must be destroyed, as a plug

with bared flexible cord is hazardous if engaged in a live socket

outlet.

■ SPECIAL INSTRUCTIONS FOR U.K.

MODEL

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug, proceed

as follows: The wire which is coloured BLUE must be

connected to the terminal which is marked with the letter

N or coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED. Making sure

that neither core is connected to the earth terminal of the

three pin plug.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

English

FEATURES

● Home Theater Sound

Connecting this system to the VS-10 (sold separately)

allows you to enjoy the power of low bass sounds

plus surround effects.

● Centralized Control with the VS-10

(sold separately)

The VS-10 is used to do things such as adjust the

subwoofer level and adjust the speaker level using test

tones. Refer to the VS-10 (sold separately) owner’s

manual.

● Advanced YST v

This subwoofer incorporates advanced YAMAHA

Active Servo Technology to achieve superior bass

reproduction.

CONTENTS

Wing nuts (x 2)

Screws (x 2)Type B brackets (x 2)Type A brackets (x 2)

(wall brackets)

Speaker mounting brackets

System connector cable

(3 m x 1)

Speaker cords

(Used for the rear speakers: 15 m x 2)

Checking the Package Contents

Check that the following accessories are included in the package.

y indicates a tip for your operation.

FEATURES .................................................................. 1

SPEAKER PLACEMENT .......................................... 2

CONNECTIONS.......................................................... 3

INSTALLATION OF THE CENTER SPEAKER .... 6

INSTALLATION OF THE REAR SPEAKERS ....... 7

TROUBLESHOOTING .............................................. 9

SPECIFICATIONS.................................................... 10

Velcro strips (x 2)

(Used for the center speaker: 4 m x 1)

■ Subwoofer (SW-VS10)

Place the subwoofer at the outside of the either right or left

main speaker and turn it slightly toward the center of the

room to reduce the wall reflections. Try altering the position

of the subwoofer versus the listening position as the relative

position will affect the way the bass sounds.

■ Rear speakers (NX-VS10E)

Depending on room conditions, it is possible to place

YAMAHA rear speakers NX-VS10E on shelves or hang

them on the wall. For the installation of the rear speakers,

refer to page 7.

Speakers should be placed about 1.5 m above the floor

when you sit on the floor, or about 1.8 m above the floor

when you sit on the chair.

■ Center speaker (NX-VS10C)

Place the center speaker on top of the television and align

the front surface of the speaker with the front surface of the

television monitor. For the installation of the center

speakers, refer to page 6.

If the speaker cannot be placed on top of the television,

place it on a rack beneath the television as close to the

television monitor as possible.

■ YAMAHA main speakers NX-VS10M

(sold separately)

Place the main speakers an equal distance from each side of

the TV monitor.

Placing the main speakers at almost the same height as your

listening position is more effective.

CAUTION

Although this center speaker is magnetically shielded,

this may still affect the color on the television monitor

when using the speaker near the television. Adjust the

relative positions of the speaker and the television if this

happen. Perform the following steps if you are using a

magnetically shielded television.

1 Turn off the television.

2 Wait awhile and turn the television back on.

About 1.8 m

1.5 - 1.8 m

Right rear

speaker

Rear speakers

Place behind or to the sides of the listening position.

Left rear

speaker

Subwoofer

Place near the right or left main speaker.

Center speaker

Place above the TV monitor in the center.

SPEAKER PLACEMENT

Main speakers (sold separately)

Place each side of the TV monitor.

About 1.5 m

When sitting on the floor. When sitting on the chair.

English

CAUTION

Always be sure to turn off the power of any component to be connected when making connections.

To ensure proper connections

• Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some

components require different connection methods and have different terminal names. Refer to the instructions for each

component to be connected to this unit.

Connecting the Center Speaker and the Rear Speakers to the Subwoofer

Note

• Do not connect any speakers to the speaker terminals on the subwoofer except for the supplied center speaker (NX-VS10C) and rear

speakers (NX-VS10E). Damage may result if a different speaker is connected.

Remove the plastic insulation from the ends of the speaker cords and twist the bare wires. (The bare wire will stay neat if you twist while

removing the plastic insulation.)

CONNECTIONS

+– +–

+–

–

REAR, CENTER SPEAKERS

DO NOT CONNECT THIS UNIT TO

SPEAKERS OTHER THAN NX-VS10E,

NX-VS10C

REAR R

CENTER

REAR L

Speaker cord

identification label

Speaker cord

identification label

Right rear speaker

Center speaker

Left rear speaker

The rear panel of the subwoofer

1 Hold down the tab.

2 Insert the bare wire of the speaker cord into

the hole.

3 Release the tab. (The tab will return to its

original position when you release your

finger.)

• Connect the line-in cord to the + terminals (red) on the

right, and the other cord to the – terminals (black) on the

left.

• Once connected, pull gently on the speaker cords to

check that they are connected securely.

Bare wire

Tab

■ Connecting the speaker cords to the speaker terminals on the center

speaker and the rear speakers

1 Open the tab for the + terminal (red) or the –

terminal (black).

2 Insert the bare wire of the speaker cord into

the hole.

3 Return the tab until it clicks.

• Connect the line-in cord to the + terminal (red), and the

other cord to the – terminal (black).

• Once connected, pull gently on the speaker cords to

check that they are connected securely.

CAUTIONS

• Do not let the bare speaker wire touch each other and

do not let them touch any metal part of the speakers.

This could damage the speakers.

• Do not mistakenly connect positive (+) to negative(–)

or vice versa when connecting speaker cords.

• Insert the speaker cords securely so that positive (+)

and negative (–) do not short. The speaker may not

output any sound or may output noise, causing damage

to the speakers, if speaker cords are not inserted

securely.

• Only insert the bare wire portion of the speaker cords

into the holes. Sound will not be output if you insert as

far as the plastic insulation part of the cord.

• Secure the speaker cords so that they will not catch on

hands or feet.

Bare wire

Tab

■ Connecting the speaker cords to the speaker terminals on the subwoofer

CONNECTIONS

English

DIGITAL 1

(V/PCM)

VIDEO 1 TV

VIDEO SIGNAL

INPUT

MAIN SPEAKERS

SUBWOOFER

OUT

MONITOR

OUT

SYSTEM

CONNECTOR

MARK

DO NOT CONNECT THIS UNIT TO

SPEAKERS OTHER THAN NX-VS10M

–

REAR, CENTER SPEAKERS

SYSTEM

CONNECTOR

MARK

DO NOT CONNECT THIS UNIT TO

SPEAKERS OTHER THAN NX-VS10E,

NX-VS10C

To an AC outlet

Once all connections have been made, check them one more

time. Finally, insert the plug of the AC power supply cord of

the subwoofer into an AC outlet.

Notes

• Do not scratch, forcibly bend, or pull the system connector cable as this may damage the cable, causing loss of audio output, and possibly

result in fire or electric shock. Take particular care that the cable is not squashed by a rack or caster.

• When you disconnect the plug of the AC power supply cord of the subwoofer, turn off the power of the VS-10 beforehand.

• When you use only the VS-10 (sold separately) without using this system, disconnect the plug of the AC power supply cord of the

subwoofer and the system connector cable beforehand.

• When the power of the VS-10 is turned off, that of the subwoofer is also turned off accordingly.

Connecting the AC Power Supply Cord

Match the mark on the plug

with the mark on the terminal

and insert.

To SYSTEM

CONNECTOR terminal

Supplied

system

connector

cable

To SYSTEM

CONNECTOR

terminal

VS-10 (sold separately)

Connecting the Subwoofer to the VS-10

Connect the SYSTEM CONNECTOR terminal on the VS-10 (sold separately) to the SYSTEM CONNECTOR terminal on

the subwoofer using the system connector cable.

Match the mark on the plugs with those on the terminals and insert the plugs.

–

REAR, CENTER SPEAKERS

SYSTEM

CONNECTOR

MARK

DO NOT CONNECT THIS UNIT TO

SPEAKERS OTHER THAN NX-VS10E,

NX-VS10C

MAINS

CONNECTIONS

Note

• Once the center speaker is secured in this way, the paint on the

television surface used for installation may peel off when velcro

strip is removed later. Be sure to apply velcro strip after carefully

checking the surface to be used for installation.

Press down.

4 Align both the velcro strips on both sides and

firmly press downward on the top of the center

speaker.

Smooth surface

Peel off the

seal.

3 Peel off the seal of the velcro strip with the

smooth surface and apply to the positions

determined in step 2.

2 Place the center speaker where it is to be

installed (ex. on top of the television ) to

determine where to apply the velcro strip with

the smooth surface.

Determine the velcro strips position on the television so

that the velcro strips should be matched with those of

the center speaker.

Center speaker

(bottom panel)

Rough surface

1 Peel off the seal of the velcro strip with the

rough surface and apply to the appropriate

positions as shown in the illustration below.

INSTALLATION OF THE CENTER SPEAKER

To prevent the center speaker from falling, secure it with the supplied velcro strips when placing it on a television or other

device.

Using the Velcro Strips

Precautions before installation

• Do not touch the adhesive surface after peeling off the strip as this will weaken its adhesive strength.

• Thoroughly wipe clean the surface where the velcro strip is to be applied. Note that adhesive strength is weakened if the

surface is dusty, oily or wet and that this may cause the center speaker to drop.

–

Peel off the

seal.

English

Note

• After mounting, check that the speakers are attached securely.

20 mm or more

7 mm

70 mm

Wood screws having a diameter of about 4

to 5 mm (commercially available)

■ Mounting speakers directly on the

wall

It is possible to hang the speakers directly on the wall

without using the type A brackets by attaching two wood

screws on the wall and then using the holes on the rear

panel of the speakers for direct attachment.

3 Adjust the angle of the speaker and then

tighten the wing nut.

Wing nut (supplied)

2 Attach the speaker to the bracket using the

supplied wing nut.

Type A bracket

20 mm or more

65 mm

1 Attach two commercially available wood

screws (diameter about 4 mm) in the location

on the wall where the rear speaker is to be

hung, and then mount the type A bracket on

the wood screws.

Check that the wood screws are secure inside the

narrow portion of the holes in the bracket.

INSTALLATION OF THE REAR SPEAKERS

Use the supplied type A wall brackets when hanging the rear speakers on a wall.

CAUTIONS

Be sure to read these important precautions.

• Each speaker weighs approximately 0.7 kg. Select a

firm wall or pillar to attach screws to. Do not attach

screws to material such as mortar or veneer as screws

may come loose easily, causing the speaker to fall.

• Do not mount speakers using nails or tape as

vibrations during operation may cause nails to come

loose or tape to peel off, causing the speaker to fall.

• Take care that the speaker cord is not pinched between

the speaker and the bracket. Be sure that the speaker

cord passes through the groove on the rear panel of the

speaker.

• Secure the speaker cords so that they will not catch on

hands or feet, causing speakers to drop.

• Be absolutely sure to check for safety after speakers

are mounted. YAMAHA bears no responsibility for

damage caused due to improper installation or

installation in an improper location.

60 mm

2 Mount the speaker on the speaker stand using

the bracket holes (spaced at 60 mm).

Be sure to prepare the small screws (diameter: 4 mm,

length: 8 mm), spring washers and washers.

Type B bracket

Supplied screw

1 Attach the type B bracket to the bottom of the

speakers using the supplied screws.

Align so that the protrusion on the bracket goes into the

groove on the bottom of the speaker.

Using Commercially Available Speaker Brackets (distance between screw

holes: 60 mm)

INSTALLATION OF THE REAR SPEAKERS

English

No sound from the center

speaker or the rear speakers.

• Is the AC power supply cord connected?No sound at all.

• Hum caused by external electromagnetic waves may be generated.

Try inverting the right-left polarity of the power cord and re-insert into

the AC outlet.

A “humming” noise is present.

• Is DOLBY PRO LOGIC selected for a monaural source on the VS-10 ?

Refer to the owner’s manual for the VS-10 (sold separately).

• Is VIRTUAL SURROUND selected on the VS-10? Refer to the owner’s

manual for the VS-10 (sold separately).

• Is the center speaker level or the rear speaker level of the VS-10 set too

low for the test tone? Refer to the owner’s manual for the VS-10 (sold

separately).

• Are the speaker cords connected correctly?

• Is the subwoofer level of the VS-10 set too low? Refer to the owner’s

manual for the VS-10 (sold separately).

• Is the system connector cable connected correctly?

No sound from the subwoofer.

• Is the INPUT selector of VS-10 set correctly? Refer to the owner’s

manual for the VS-10 (sold separately).

• Is the sound from the VS-10 temporarily muted? Refer to the owner’s

manual for the VS-10 (sold separately).

TROUBLESHOOTING

Be sure to investigate thoroughly before requesting repairs or after service. If it cannot be corrected, or if the problem is not

listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center.

Notes

• Sometimes the system may cease to recognize operations due to a mistaken operation or as a result of strong external noise (such as

irregular voltage due to shock of impact, excessive static electricity, or lightning strike). If this happens, first disconnect the power cord,

wait about 30 seconds, re-connect the power cord, and try the desired operation again.

• When requesting repairs or after service, be sure to bring along with the VS-10 (sold separately).

SYMPTOM CHECK Refer to page

—

3, 4

—

• Are the headphones connected to the VS-10? Refer to the owner’s manual

for the VS-10 (sold separately).

—

No sound from the center

speaker.

• Is GAME or HALL selected for the 2-channel source on the VS-10 ?

Refer to the owner’s manual for the VS-10 (sold separately).

—

Rear Speakers (NX-VS10E)

Type .......................................................... Acoustic suspension type

Speaker ........................................ 8-cm cone, magnetically shielded

Maximum Input Power............................................................. 30 W

Impedance ............................................................................. 6 ohms

Dimensions (W x H x D).................................. 100 x 140 x 112 mm

Weight.................................................................................... 0.68 kg

General

Power Supply

[Europe and U.K. models] .................................AC 230V, 50 Hz

[U.S.A. and Canada models] .............................AC 120V, 60 Hz

[Australia model] ...............................................AC 240V, 50 Hz

Power Consumption

[Europe, U.K. and Australia models].................................. 90 W

[U.S.A. and Canada models] .............................................. 95 W

Accessories ..................................Speaker cords (15 m x 2, 4 m x 1)

System connector cable (3 m x 1)

Velcro strips (x 2)

Type A brackets (x 2)

Type B brackets (x 2)

Screws (x 2)

Wing nuts (x 2)

Specifications are subject to change without notice.

Amplifier Section

Minimum RMS Output Power

Subwoofer ............................ 50 W (100 Hz, 10% THD, 5 ohms)

Center speaker ....................... 40 W (1 kHz, 10% THD, 6 ohms)

Rear speakers ................... 25 W x 2 (1 kHz, 10% THD, 6 ohms)

Subwoofer (SW-VS10)

Type .......... Advanced YAMAHA Active Servo Technology System

Speaker ...................................... 16-cm cone, magnetically shielded

Maximum Input Power............................................................. 50 W

Impedance ............................................................................. 5 ohms

Dimensions (W x H x D) .................................. 200 x 395 x 400 mm

Weight.................................................................................... 10.6 kg

Center Speaker (NX-VS10C)

Type ........................................................................ Bass-Reflex type

Speakers................................. 8-cm cone x 2, magnetically shielded

Maximum Input Power............................................................. 40 W

Impedance ............................................................................. 6 ohms

Dimensions (W x H x D) .................................. 240 x 100 x 145 mm

Weight...................................................................................... 1.7 kg

SPECIFICATIONS

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in China V672820

Yamaha NX-SW10 Руководство пользователя

Бренд: Yamaha

Модель: NX-SW10

Категория: Дополнительное музыкальное оборудование

Тип: Руководство пользователя

Это руководство также подходит для

VS-10

Скачать PDF

сообщить о нарушении

на других языках

English: Yamaha NX-SW10 User manual
français: Yamaha NX-SW10 Manuel utilisateur
italiano: Yamaha NX-SW10 Manuale utente
español: Yamaha NX-SW10 Manual de usuario
Deutsch: Yamaha NX-SW10 Benutzerhandbuch
Nederlands: Yamaha NX-SW10 Handleiding
português: Yamaha NX-SW10 Manual do usuário
dansk: Yamaha NX-SW10 Brugermanual
polski: Yamaha NX-SW10 Instrukcja obsługi
čeština: Yamaha NX-SW10 Uživatelský manuál
svenska: Yamaha NX-SW10 Användarmanual
Türkçe: Yamaha NX-SW10 Kullanım kılavuzu
suomi: Yamaha NX-SW10 Ohjekirja
română: Yamaha NX-SW10 Manual de utilizare

Модели других брендов

Pioneer S-11 Руководство пользователя

Yamaha NX-SW10 Руководство пользователя

Это руководство также подходит для

Yamaha NX-SW10 Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов