1
Quick Start Guide
Industrial Connectivity
Solutions
Model Series: N206-XXX-IND, P569-XXX-IND, U325-XXX-IND,
N200P-XXX-IND, N455-XXX-IND, N820-XXX-IND
See page 2 for a complete model listing.
Tripp Lite’s industrial connectivity solutions comply with the IP44 standard for protection
against water intrusion on all sides, as well the IP68 standard for protection against
invasive dust, dirt and sand, and submersion in up to 1.5 m of water for up to 60 minutes.
Note: Certain product combinations are needed to achieve IP44 and/or IP68 standards.
See section 4. Product Combinations for IP44 and IP68 Protection for more information.
IP68 Protection rating is based on manufacturer’s guarantee.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
®
surge protector in our monthly drawing!
tripplite.com/warranty
Español 13 • Français 25 • Русский 37
2
Table of Contents
Industrial Connectivity Solutions Complete Product Listing 3
1. N206-SB01-IND Surface Box Dimensions 4
2. Industrial Bulkhead Coupler Installation 5
(N206-BC01-IND, U325-000-IND, P569-000-FF-IND,
N455-BC01-IND)
3. Industrial Keystone Jack Installation (N206-KJ01-IND) 7
4. Product Combinations for IP44 and IP68 Protection 10
Warranty and Product Registration 11
3
Industrial Connectivity Solutions
Complete Product Listing
Industrial Faceplates
N206-FP01-IND (1 Cutout)
N206-FP02-IND (2 Cutouts)
N206-FP04-IND (4 Cutouts)
Industrial Surface Mount Box
N206-SB01-IND
Bulkhead Couplers and
Keystone Jacks
N206-BC01-IND
(Cat5e/6 Bulkhead Coupler)
N206-KJ01-IND (Keystone Jack)
U325-000-IND (USB 3.0 Coupler)
P569-000-FF-IND (4K HDMI Coupler)
N455-BC01-IND
(Multimode Fiber LC/LC Coupler)
Industrial Patch Cables &
4PPoE (90W) Cables
N206-PC03-IND
(3 ft. Cat5e/6 Patch Cable)
N206-PC10-IND
(10 ft. Cat5e/6 Patch Cable)
N206-PC16-IND
(16 ft. Cat5e/6 Patch Cable)
N206-PC23-IND
(23 ft. Cat5e/6 Patch Cable)
N206-PC33-IND
(33 ft. Cat5e/6 Patch Cable)
N206-PC5O-IND
(50 ft. Cat5e/6 Patch Cable)
N200P-003BL-IND
(3 ft. Cat6 4PPoE Cables)
N200P-010BL-IND
(10 ft. Cat6 4PPoE Cables)
N200P-016BL-IND
(16 ft. Cat6 4PPoE Cables)
N200P-023BL-IND
(23 ft. Cat6 4PPoE Cables)
N200P-033BL-IND
(33 ft. Cat6 4PPoE Cables)
Industrial Patch Cables &
4PPoE (90W) Cables (continued)
N200P-050BL-IND
(50 ft. Cat6 4PPoE Cables)
Industrial USB 3.0 Cables
U325-003-IND (3 ft. USB 3.0 Cable)
U325-006-IND (6 ft. USB 3.0 Cable)
U325-01O-IND (10 ft. USB 3.0 Cable)
U325-013-IND (13 ft. USB 3.0 Cable)
Industrial 4K HDMI Cables
P569-003-IND (3 ft. 4K HDMI Cable,
1 water-resistant connector)
P569-006-IND (6 ft. 4K HDMI Cable,
1 water-resistant connector)
P569-010-IND (10 ft. 4K HDMI Cable,
1 water-resistant connector)
P569-012-IND (12 ft. 4K HDMI Cable,
1 water-resistant connector)
P569-003-IND2 (3 ft. 4K HDMI Cable,
2 water-resistant connectors)
P569-006-IND2 (6 ft. 4K HDMI Cable,
2 water-resistant connectors)
P569-010-IND2 (10 ft. 4K HDMI
Cable, 2 water-resistant connectors)
P569-012-IND2 (12 ft. 4K HDMI
Cable, 2 water-resistant connectors)
Industrial Duplex Multimode
Fiber Patch Cables
N820-01M-IND
(1 m LC/LC Fiber Patch Cables)
N820-02M-IND
(2 m LC/LC Fiber Patch Cables)
N820-05M-IND
(5 m LC/LC Fiber Patch Cables)
N820-10M-IND
(10 m LC/LC Fiber Patch Cables)
Waterproof Cable Assembly Kit
N206-WK01-IND
4
1. N206-SB01-IND Surface Mount Box Dimensions
Dimensions: [mm] INCHES
Knockout for 0.5"
(M16) Cable
Knockout for 1.25"
(M32) Conduit
[Ø 25]
Ø 1
[50]
2
[24]
1
[120]
4.7
[Ø 32]
Ø 1.25
[80]
3
[80]
3
[50]
2
[107]
4.2
[32]
1.25
[Ø 13]
Ø 0.5
5
2. Industrial Bulkhead Coupler Installation
(N206-BC01-IND, U325-000-IND, P569-000-FF-IND and N455-BC01-IND)
Note: USB, HDMI and fiber solutions are also available. Screwdriver not included. Additional
tools may be required to remove knockouts.
1
2
3
4
5
Knockout
Note: Use the included
0.5" (M16) cable glands to
complete this step.
6
2. Industrial Bulkhead Coupler Installation
(N206-BC01-IND, U325-000-IND, P569-000-FF-IND and N455-BC01-IND)
6
7
8
9
For the front mating connection, you can use the N206-PCXX-IND, U325-XXX-IND,
P569-XXX-IND, N820-XXX-IND or N200P-XXBL-IND Series industrial cables.
You can also choose to assemble your own cable connection using the
N206-WK01-IND waterproof assembly kit.
N206-WK01-IND
7
Note: Additional tools may be required to remove knockouts.
1
3
4
2
Knockout
Note: Use the
included 0.5"
(M16) cable
glands to
complete this
step.
2" (50 mm)
Drain Wire
Drain Wire
3. Industrial Keystone Jack Installation
(N206-KJ01-IND)
8
5
6
8
7
For the front mating connection, you can use N206-PCXX-IND Series industrial
cables. You can also choose to assemble your own cable connection using the
N206-WK01-IND waterproof assembly kit.
N206-WK01-IND
3. Industrial Keystone Jack Installation
(N206-KJ01-IND)
9
3. Industrial Keystone Jack Installation
(N206-KJ01-IND)
9
10
10
4. Product Combinations for IP44 and
IP68 Protection
Note: For IP68 environments (submersion in up to 1.5 m of water for 60 minutes), the
N206-SB01-IND should be used (not the N206-FPXX-IND). IP68 rating of up to 1.5 m of water
for up to 60 minutes is based on manufacturer’s guarantee.
Faceplate
Bulkhead
Couplers/
Keystone Jacks
Industrial
Patch Cables/
Industrial
USB 3.0 Cables
Waterproof
Cable
Assembly Kit
N206-FPXX-IND N206-BC01-IND
(Bulkhead Coupler)
N206-PCXX-IND
(Cat5e/6 Cable)
or
N206-WK01-IND
N206-FPXX-IND N206-KJ01-IND
(Keystone Jack)
N206-PCXX-IND
(Cat5e/6 Cable)
N206-WK01-IND
N206-FPXX-IND N206-BC01-IND
(Bulkhead Coupler)
N200P-XXX-IND
(Cat6 4PPoE
Cables)
N206-WK01-IND
N206-FPXX-IND U325-000-IND
(USB 3.0 Coupler)
U325-XXX-IND
(USB 3.0 Cable)
N206-FPXX-IND P569-000-FF-IND
(4K HDMI Coupler)
P569-XXX-IND/
P569-XXX-IND2
(4K HDMI Cable)
N206-FPXX-IND N455-BC01-IND
(LC/LC Fiber Coupler)
N820-XXM-IND
(LC/LC Fiber
Cable)
Surface Mount
Box
Bulkhead
Couplers/
Keystone Jacks
Industrial
Patch Cables/
Industrial
USB 3.0 Cables
Waterproof
Cable
Assembly Kit
N206-SB01-IND N206-BC01-IND
(Bulkhead Coupler)
N206-PCXX-IND
(Cat5e/6 Cable)
or
N206-WK01-IND
N206-SB01-IND N206-KJ01-IND
(Keystone Jack)
N206-PCXX-IND
(Cat5e/6 Cable)
N206-WK01-IND
N206-SB01-IND N206-BC01-IND
(Bulkhead Coupler)
N200P-XXX-IND
(Cat6 4PPoE
Cables)
N206-WK01-IND
N206-SB01-IND U325-000-IND
(USB 3.0 Coupler)
U325-XXX-IND
(USB 3.0 Cable)
N206-SB01-IND P569-000-FF-IND
(4K HDMI Coupler)
P569-XXX-IND/
P569-XXX-IND2
(4K HDMI Cable)
N206-SB01-IND N455-BC01-IND
(LC/LC Fiber Coupler)
N820-XXM-IND
(LC/LC Fiber
Cable)
11
Warranty and Product Registration
Limited Lifetime Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be
free from original defects in material and workmanship for its lifetime. If the product should
prove defective in material or workmanship within that period, Seller will repair or replace
the product, at its sole discretion. Service under this Warranty can only be obtained by Buyer
delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite,
1111 W. 35th Street, Chicago, IL 60609. Seller will pay return shipping charges.
Visit tripplite.com/support before sending any equipment back for repair.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM
ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES
OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES
OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD SET FORTH ABOVE; THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIAL DAMAGES.
(Some states do not allow limitations on how long an implied warranty lasts, and some states
do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal rights,
and you may have other rights which vary from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device
is suitable, adequate or safe for the use intended. Since individual applications are subject to
great variation, the manufacturer makes no representation or warranty as to the suitability or
fitness of these devices for any specific application.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis
(this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended.
The Tripp Lite has a policy of continuous improvement. Specifications are subject to change
without notice. Photos and illustrations may differ slightly from actual products.
12
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
20-01-193 93-3774_RevB
13
Guía de Inicio Rápido
Soluciones de
Conectividad Industrial
Serie de Modelos: N206-XXX-IND, P569-XXX-IND, U325-XXX-IND,
N200P-XXX-IND, N455-XXX-IND, N820-XXX-IND
Ver página 14 para una lista completa de modelos.
2) Las soluciones de conectividad industrial de Tripp Lite son compatibles con el estándar
IP44 para protección contra intrusión de agua en ambos lados, así como el estándar IP68
para protección contra polvo, suciedad y arena invasivos e inmersión en hasta 1.5 m de
agua por 60 minutos.
Nota: Ciertas combinaciones de productos son necesarias para alcanzar
los estándares IP44 o IP68.
Consulte la sección 4. Combinaciones de Productos para Protección IP44 e IP68 para
más información. La especificación de protección IP68 se basa en la garantía del fabricante.
1111 W. 35th Street, Chicago, IL 60609, EE. UU. • tripplite.com/support
Copyright © 2021 Tripp Lite. Todos los derechos reservados.
English 1 • Français 25 • Русский 37
14
Índice
Lista Completa de Productos para Soluciones de Conectividad 15
Industrial
1. Dimensiones de la Caja de Superficie N206-SB01-IND 16
2 Instalación de Acoplador de Mampara Industrial 17
(N206-BC01-IND, U325-000-IND, P569-000-FF-IND,
N455-BC01-IND)
3. Instalación de Conector Industrial Keystone (N206-KJ01-IND) 19
4. Combinaciones de Productos para Protección IP44 e IP68 22
Garantía 23
15
Lista Completa de Productos para
Soluciones de Conectividad Industrial
Placas Frontales Industriales
N206-FP01-IND (1 Recorte)
N206-FP02-IND (2 Recortes)
N206-FP04-IND (4 Recortes)
Caja de Instalación Industrial en Superficie
N206-SB01-IND
Acopladores de Conectores y
Conectores Keystone
N206-BC01-IND
(Acoplador de Conector Cat5e/6)
N206-KJ01-IND (Conector Keystone)
U325-000-IND (Acoplador USB 3.0)
P569-000-FF-IND (Acoplador HDMI 4K)
N455-BC01-IND
(Acoplador de Fibra Multimodo LC/LC IP68)
Cables Patch Industriales y
Cables 4PPoE (90W)
N206-PC03-IND
(Cable Patch Cat5e / Cat6 de 91 cm [3 pies])
N206-PC10-IND
(Cable Patch Cat5e / Cat6 de 3.05 m [10 pies])
N206-PC16-IND
(Cable Patch Cat5e / Cat6 de 4.88 m [16 pies])
N206-PC23-IND
(Cable Patch Cat5e / Cat6 de 7 m [23 pies])
N206-PC33-IND
(Cable Patch Cat5e / Cat6 de 10 m [33 pies])
N206-PC5O-IND
(Cable Patch Cat5e / Cat6 de 15.2 m [50 pies])
N200P-003BL-IND
(Cables Cat6 4PPoE de 91.4 cm [3 pies])
N200P-010BL-IND
(Cables Cat6 4PPoE de 3.05 cm [10 pies])
N200P-016BL-IND
(Cables Cat6 4PPoE de 4.88 m [16 pies])
N200P-023BL-IND
(Cables Cat6 4PPoE de 7 m [23 pies])
N200P-033BL-IND
(Cables Cat6 4PPoE de 10 m [33 pies])
Cables Patch Industriales y
Cables 4PPoE (90W) (continuación)
N200P-050BL-IND
(Cables Cat6 4PPoE de 15.2 m [50 pies])
Cables USB 3.0 Industriales
U325-003-IND (Cable USB 3.0 de 91.4 cm
[3 pies])
U325-006-IND (Cable USB 3.0 de 1.83 m [6 pies])
U325-01O-IND (Cable USB 3.0 de 3.05 m [10
pies])
U325-013-IND (Cable USB 3.0 de 3.96 m [13
pies])
Cables HDMI 4K Industriales
P569-003-IND (Cable HDMI 4K de
91 cm [3 pies], 1 conector resistente al agua)
P569-006-IND (Cable HDMI 4K de
1.83 m [6 pies], 1 conector resistente al agua)
P569-010-IND (Cable HDMI 4K de 3.05 m [10
pies], 1 conector resistente al agua)
P569-012-IND (Cable HDMI 4K de 3.66 m [12
pies], 1 conector resistente al agua)
P569-003-IND2 (Cable HDMI 4K de 91 cm [3
pies], 2 conectores resistentes al agua)
P569-006-IND2 (Cable HDMI 4K de 1.83 m [6
pies], 2 conectores resistentes al agua)
P569-010-IND2 (Cable HDMI 4K de 3.05 m
[10 pies], 2 conectores resistentes al agua)
P569-012-IND2 (Cable HDMI 4K de 3.66 m
[12 pies], 2 conectores resistentes al agua)
Cables Patch Industriales
de Fibra Multimodo Dúplex
N820-01M-IND
(Cables Patch de fibra LC/LC de 1 m)
N820-02M-IND
(Cables Patch de fibra LC/LC de 2 m)
N820-05M-IND
(Cables Patch de fibra LC/LC de 5 m)
N820-10M-IND
(Cables Patch de fibra LC/LC de 10 m)
Juego de Ensamble de Cable Impermeable
N206-WK01-IND
16
1. Dimensiones de la Caja de Instalación
en Superficie N206-SB01-IND
Dimensiones: [mm] PULGADAS
Recorte para Cable de
0.5" (M16)
Recorte para Tubo Conduit
de 1.25" (M32)
[Ø 25]
Ø 1
[50]
2,
[24]
1
[120]
4.7
[Ø 32]
Ø 1.25
[80]
3
[80]
3
[50]
2,
[107]
4.2
[32]
1.25
[Ø 13]
Ø 0.5
17
2. Instalación de Acoplador de Mampara Industrial
(N206-BC01-IND, U325-000-IND, P569-000-FF-IND y N455-BC01-IND)
Nota: También están disponibles soluciones de USB, HDMI y fibra. Destornillador no incluido.
Es posible que se requieran herramientas adicionales para eliminar los recortes.
1
2
3
4
5
Recorte
Nota: Use los pasacables de
0.5" (M16) incluidos para
completar este paso.
18
2. Instalación de Acoplador de Mampara Industrial
(N206-BC01-IND, U325-000-IND, P569-000-FF-IND y N455-BC01-IND)
6
7
8
9
Para la conexión de acoplamiento delantero, puede usar los cables industriales de la
serie N206-PCXX-IND, U325-XXX-IND, P569-XXX-IND, N820-XXX-IND o
N200P-XXBL-IND. Usted también puede optar por ensamblar su propia conexión de
cable con el juego de ensamble impermeable N206-WK01-IND.
N206-WK01-IND
19
Nota: Es posible que se requieran herramientas adicionales para eliminar los recortes.
1
3
4
2
Recorte
Nota: Use los
pasacables de
0.5" (M16)
incluidos para
completar
este paso.
50 mm [2"]
Cable de Descarga
Cable de
Descarga
3. Instalación de Conector Industrial Keystone
(N206-KJ01-IND)
20
5
6
8
7
Para la conexión de acoplamiento delantero, puede usar los cables industriales
de la serie N206-PCXX-IND. Usted también puede optar por ensamblar su propia
conexión de cable con el juego de ensamble impermeable N206-WK01-IND.
N206-WK01-IND
3. Instalación de Conector Industrial Keystone
(N206-KJ01-IND)
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/
