Telefunken TF-LED42S14T2 Руководство пользователя

Бренд: Telefunken

Модель: TF-LED42S14T2

Категория: ЖК-телевизоры

Тип: Руководство пользователя

Это руководство также подходит для

LED TV

Телевизор цветного

изображения c

жидкокристаллическим

экраном

TF-LED22

S12T2

Instruction manual

Руководство по

эксплуатации

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation

Base installation

Wall mounting

Connection

Outdoor antenna connection

Other connections

Operation

Control elements

Front panel

Back panel

Remote controller

Changing the battery

General operations

USB operation

Background information

Operations of file playback

General information

Troubleshooting

Causes of interference

Accessories

Specifications

OSD operation

Picture menu

Sound menu

Channel

Time menu

Setup menu

Lock menu

Electronic programme guide

Digital programme recording

TimeShift function

CI information

Before you start

If you want to dispose of this product, do not mix it with general household waste. There

is a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,

you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human

health.

Utilization of the product

Important safeguards

• Please unplug the power cord from the AC

outlet and contact a service center for repair

if following occurs: any obvious abnormality

appears in the unit, such as smoky, peculiar

smell or strange sound; liquid has been spilled or

other objects have fallen into the unit; no picture

or sound; cover or panel is broken; although you

have operated the unit following the operating

instructions, it still cannot work normally.

• This unit can be connected to a power

supply outlet without the third ground contact

as well as with a ground contact.

• Always disconnect the power cord and

antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;

also unplug the signal cables from the input

ports when the unit is unused for long periods

of time.

• When unplugging the plug, always hold the

wide slot, do not touch the metal part, and do

not destroy, twist, pull or roast the power cord.

• Please contact the service center

immediately if you found that the core is

showed in the air or has been broken.

• Please replace the AC outlet if the metal

bolt cannot be inserted into the power socket

completely or it cannot be fastened even when

it was pushed in, otherwise, any accidents of

shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket

with numerous devices jointed on one power

socket or cable device. The wire of non-

designated capacity may cause the fire due to

the generation of heat.

• All instructions must be read and

understood well before you operate the unit.

Heed all warnings and follow all instructions.

• Please use the accessories provided

by the manufacturer. Using inadequate

accessories may result in accidents.

• Please adjust the product through the

panel buttons or the remote controller, do

not remove the cover or attempt to service

the product by yourself. Do not disassemble

back cover and do not make maintenance by

yourself to avoid the electric shock.

• Over-press the panel may destroy the

product.

• Do not place the product on an unstable

cart, stand surface, tripod, bracket, or table.

The product may fall, causing serious accidents

as well as the damage to the product.

• Please place the product on a flat surface

in a well-ventilated location. Keep it away from

the burning-light, direct sunlight, vibration,

high-temperature and humidity.

• Do not place any vase, potted plant, cup,

medicine and any container with water on this

Before you start

product. If the liquid is spilt, it may cause the

fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause

break down. This equipment may be observed

deterioration of the picture by electromagnetic

radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it

moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on

this product. If it is tipped over or fallen down, it

may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the

product lifetime. Keep a space at least 10 cm

at above, left, and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the

LED TV up or down display direction.

• Do not transport it with the power cord

or the connection cable connected. If you

move this product with the power cord or the

connection cable connected, damaged power

cord, connection cable or connection terminal

may cause fire, electric shock or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop

or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use.

This phenomenon indicates that heat

exchange in normal working mode, thus please

do not let children or anyone who is sensitive

of temperature to touch.

All images provided herein are schematic

drawings and may differ from real objects.

WARNING

In order to avoid damage, make sure

to secure the unit on the wall

according to the wall mounting

instruction.

Installation

Base installation

Cover a flat stable surface with a soft cloth.

Place the TV unit facedown on the cloth.

Insert the two support legs and fix them with

the supplied screws as shown on the picture.

Wall mounting

• For wall mounting the back cabinet of this

unit is equipped with 4 screw holes. Spread

distance between the holes is 100*100 mm.

A VESA wall-mount bracket should be used

for wall mounting (the bracket is not included

and should be acquired separately).

Manufacturer is not responsible for improper

mounting resulting in damage of the unit.

Wall or ceiling mounting implements

must be durable and sufficient enough to

support the weight of the unit.

•

Separate the stands from the cabinet

before wall mounting.

Before you start

Connection

75 Ohm co-axis cable

TVRF antenna jack

Antenna cable connector

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω

impedance converter to plug in antenna input

terminal on the rear of the cabinet.

Other connections

• Connect the video source to the AV IN

input using an RCA cable.

• Plug the power cable in the electric outlet,

making sure the current voltage is supported.

• If the video source has a HDMI output

jack, you can connect the signal to the monitor

by the HDMI cable (not included).

• SPDIF coaxial output is intended for

transmitting multi-channel sound to an

external decoder (e.g. in 5.1-CH format).

Coaxial audio cable should be used for

connection (not included).

• Connect your headphones or earphones

(not included) to the headphone socket of

this unit. When earphones are connected, the

sound output through the built-in speakers of

this unit is mute.

• PCMCIA slot is used for CI modules that

are obtained from your digital TV provider.

Operation

Front panel

Control elements

Button panel

\ buttons

Scan up/down through the channel list. In the menu

system, they act like the up/down direction buttons on

the remote and adjust menu controls.

\ buttons

Decrease/increase the volume. In the menu system,

they act like the right/left direction buttons on the

remote and adjust menu controls.

\ button

Turns the TV on and puts it into standby. While the

TV is on, it is used to open the main menu and to

return to the previous menu. Outside the menu,

press and hold the button for 3 seconds to go to the

list of signal sources. Press and hold it more than 3

seconds to put the TV into standby.

Back panel

The back panel terminals

are (from top to bottom):

USB port

PCMCIA (CI+) slot

Composite AV input

HDMI input

Headphone socket

Coaxial audio output

TVRF antenna input

Operation

Remote controller (RC)

1. SOURCE button

2. Number buttons

3. TV button

4. MENU button

5. Cursor (UP/DOWN/LEFT/RIGHT)

buttons/OK button/ZOOM-/ZOOM+ buttons

6. LIST button

7. VOL+/VOL- buttons

8. MUTE button

9. TEXT button

10. SUBTITLE button

11. Red button

12. Green button

13. POWER/STANDBY button

14. GUIDE button

15. EXIT button

16. RETURN button

17. INFO button

18. CH+/CH- buttons

19. TIMESHIFT button

20. REC button

21. LANG/Blue button

22. Yellow button

Changing the battery

1. Remove the battery compartment cover

on the back of the RC.

2. Insert the batteries into the battery

compartment making sure that the correct

polarity is observed.

3. Install the cover back.

• Use two AAA batteries for the RC. The RC

should be pointed at remote sensor within 8

meters and within 30 degrees at the left or the

right side.

• Take the battery out of the RC if it is not

used for a long time.

• Do not mix new and used batteries or

different types of batteries. Weak batteries can

leak and severely damage the RC.

• Do not expose the RC to shock, liquids,

and do not place it in an area with high

humidity.

CAUTION!

Incorrect installation of the batteries may

lead to an explosion.

Please replace used batteries with the

batteries of the same or comparable type.

1 2 3

List

REC

Timeshift

Operation

General operations

• Connect the plug of the power cord

to the power supply outlet, the power indicator

will light showing that the unit is in standby

mode. To switch on the unit, press POWER

button on the panel or on the RC; when the TV

is on, the power indicator is off. Press POWER

button again to switch the unit to the standby

mode, the power indicator will light up. To

switch off the unit completely, disconnect the

power cord plug from the power supply outlet.

• Press VOL- button on the unit or on

the RC repeatedly to decrease the volume;

press VOL+ button on the unit or on the RC

repeatedly to increase the volume.

• Press RETURN button on the RC to select

from the present channel and the previously

displayed channel.

• Press MUTE button to mute sound, press

this button again or adjust volume to resume

sound.

• In TV mode press CH+/CH- buttons on the

RC to select previous or next channel; or press

number buttons to enter a channel number

directly.

• Press INFO button to display the preset

TV channel information.

• Press ZOOM+/- buttons repeatedly to

select a screen format. Available aspects may

differ for different signal sources.

• Press SOURCE button, then press cursor

buttons on the RC to select a source from

available source list: DTV => ATV => AV =>

HDMI => USB; You can press TV button to

access TV source mode directly.

• Press GUIDE button to access the

electronic program guide in DTV mode.

• Press LIST button to enter the recorded list.

• Press SUBTITLE button to enter the subtitle

anguage menu in DTV mode.

• Press LANG button to enter the audio

language menu in DTV mode.

TELETEXT operations (option)

• Select the TV source mode. Then press

CH-/CH+ buttons to select TV channel in order

to pick up the picture signal of Teletext.

• Teletext button functions are as follows:

TEXT: Press this button to enter into Teletext

mode. Follow the guides on screen and use

the color buttons to navigate the Teletext.

Red/Green/Yellow/Blue buttons: Press

these 4 color buttons to access directly to

corresponding color page displayed at the

lower parts of teletext screen.

Operation

OSD operation

1. Press MENU button to enter the setting menu

displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the RC

to select setting page.

3. Press OK button on the RC to go to the

parameter list.

4. Press UP/DOWN cursor buttons on the RC to

select a parameter to adjust.

5. Press LEFT/RIGHT cursor buttons on the RC

to adjust the selected parameter.

6. Press MENU button to return to the previous

menu page. Press EXIT button on the RC to

quit the menu.

Some menu items may be in grey color,

in this case they are not adjustable. Pictures of

OSD menu are for reference only; they may

differ from the actual menu tabs.

Picture menu

• Picture Mode: Dynamic/Standard/Mild/

Personal. When Personal mode is

selected, you can adjust contrast,

brightness, colour, tint (NTSC signal only)

and sharpness of the image.

• Colour Temp: Cold/Normal/

Warm.

• Noise Reduction: Dynamic noise

reduction effect for reducing the video noise

level. Select the Off/Low/Middle/High/Default

mode.

• DCR: when DCR is enabled,

brightness automatically increases in dark

images and decreases in bright ones.

• Enjoy Music: enable this option to

enhance the way music sounds.

• Auto Volume: reduce the

difference between channel and program

volume automatically.

• Sound mode: Standard/Music/Movie/

Sports/Personal. When Personal mode is

selected, you can adjust treble and bass.

Sound menu

• SPDIF Mode: Select the digital audio

output mode: PCM/AUTO/OFF.

• Aspect ratio: select the screen aspect

ratio.

• Surround Sound: enable or disable the

surround sound effect.

• AD Switch (in DTV mode): This is an

auxiliary audio function that provides an

additional audio track for visually challenged

persons. This function handles the Audio

Stream for the AD (Audio Description), when

it is sent along with the Main audio from

the broadcaster. Users can turn the Audio

Description On or Off and control the volume.

• TT Language: select the language of

the Teletext.

• Audio Language: select the language

of audio (available for some DTV channels).

• Subtitle

Language

: select subtitle language

(available for some DTV channels).

Operation

Channel menu

• Auto Tuning: press OK buttons to select

the country and tune type for channels to start

automatic search and saving of available ATV

channels. After the search is finished, the unit

will skip to searching DTV channels.

• ATV Manual Tuning:

Current CH: select channel number.

• DTV Manual Tuning: press LEFT/RIGHT

cursor buttons to select channel number. Press

OK button to start searching. If the selected

channel number is available, the channel will

be saved under the selected number. Press

MENU button to quit.

Sound System: select corresponding sound

system.

Fine-Tune: perform fine adjustment of the

current frequency.

Search: press LEFT/RIGHT buttons; the

unit will search for next available channel

downward or upward and save it under the

current number.

• Programme Edit: this item allows

you to sort TV programs according to your

preferences. Enter the program edit menu:

Delete:

elect the channel you want to delete.

Press red button to delete the channel.

Move (not available for DTV channels with

LCN): Highlight the needed channel. Press

green button; select the position to put the

channel into. Press green

button to confirm.

Fav: Highlight the needed channel. Press

yellow button to add that channel to the list of

favourites.

Skip: Highlight the needed channel. Press

blue button; now this channel will be skipped

when you select previous/next channels.

• Signal Information: view the information

on the current signal.

• CI Information (only in DTV mode): this

function enables you to watch some encrypted

services (pay services). Please insert a CI card

into the PCMCIA slot according to the arrow on

the CI card.

• The function can only be gotten when

CI slot is available.

• It is possible for you to change CI

(Common Interface) menu screen and service

by consulting your dealer.

• Please do not insert or pull out the CI card

when power on. During initialization of the CI

card, please don’t operate the TV.

• Do not insert or pull out the CI card

frequently so as to avoid any damages of the

TV and the CI card.

• Schedule List (only in DTV mode): view

the list of scheduled programs.

• Recorded List (only in DTV mode): view

the list of recorded

programs.

• First Time Installation: run the

initial setting procedure.

Operation

• PVR File System (in DTV mode):

Select Disc: select the storage used for PVR.

Time Shift Size: select the time for Time

Shift.

Format: format the USB.

Speed Check: display the speed of the

storage.

• Software update (USB): Update TV

software using a USB storage device.

• Language: select the language of

the on-screen display (OSD) menu.

Setup menu

• Soundbar Ready: use this option

to connect external equipment such as

soundbar, DVD player, etc.

is on, the screen will give some information to

people whose hearing is impaired. When Off,

the information will be hidden.

• Reset: restore TV settings

to their initial factory defaults.

• Blue Screen: enable or disable a

blue screen showing when the TV signal is

weak.

Lock menu

Time menu

• Clock: You can display either the DTV

signal stream time or set the system time.

• Sleep Timer: select the period until

automatic switch-off of the unit.

• Auto Standby: enable or disable the

automatic switch-off of the TV if no input is

given.

• OSD Timer

: select the time during

which the OSD menu stays visible.

• Off Time/On Time: select the time

for the automatic switch off/on of the TV.

• Time Zone: select your time zone.

• World Clock: display the world clock.

• Teletext: toggle the Teletext on or off.

• Hearing Impai

red: When Hearing Impaired

• Password: You can set your private

password. Press the number buttons on the

remote control to set the new password. When

the new password has been put in twice, the

setting is finished successfully. The TV will go

back to previous menu. The default password

is 0000.

• Block Program (in TV/DTV mode): select

this option to lock the available channel you

want.

• Parental Guidance

: set the access

to age-restricted content.

Operation

Electronic Programme Guide

(in DTV mode)

Press the GUIDE button to display the

Programme Guide menu. This function gives

you the detailed information of the channel,

indicating the time of the program playing.

From the Programme Guide it is possible to

check the program information for the next

eight days (If the information is available from

the broadcaster). Press EXIT button to quit.

• Record: Press Red button to set the

parameters of recording, The unit is able to do

schedule recording when TV is turning on or in

standby mode. You can set up several

schedule recording. Different schedules should

not overlap. When recording starts in standby

mode, the front indicators will change color and

there will be no picture or sound from the unit.

You can press the POWER button to light up

the screen.

• Info: Press the

INFO button to see

the detailed information of the current channel.

• Remind: If you find the desired program

which will be shown in the future. Press

the green button to book program.

Digital program recording

Insert a USB, the system will automatically

create a folder to store the files recorded.

Recording begins when REC button is

pressed, and it records all the time until STOP

button is pressed or the memory is full.

Please note the following about PVR:

• USB storage device must have the

capacity of at least 512 MB and support the

USB 2.0 standard. Some non-standard

storage devices may not be supported

• Try formatting the inserted storage device

when you have trouble recording.

• Do not disconnect the device while the

formatting is in progress. When you

format the device, all data on it is deleted.

It may be advisable to back up your files

before formatting.

• If the USB storage device has several

partitions, the PVR system can record the

data on any one of them.

TimeShift function

TimeShift is a feature enabling you to

record an on-air digital TV program. Press

the Timeshift button to activate TimeShift.

The program is being recorded. You can

pause and rewind. Press Timeshift again to

resume the program. Press STOP to

disable TimeShift.

CI Information

(only in DTV mode): This function enables

you to watch some encrypted services (pay

services). Please insert a CI card into the

PCMCIA slot according to the arrow on the

CI card.

• The function can only be available

when CI card is present.

• It is possible for you to change CI

(Common Interface) menu screen and service

by consulting your dealer.

• Please do not insert or pull out the CI card

when power on. During initialization of the CI

card, please don’t operate the TV.

• Do not insert or pull out the CI card

frequently so as to avoid any damages of the

TV and the CI card.

• If there is no picture and/or sound with the

CI+ CAM module inserted, please contact the

customer support of the service provider.

Operation

USB operation

General information

USB file systems supported: FAT32. 2.0

USB version is supported. Maximum capacity

1 TB. For correct and satisfactory operation,

licensed USB devices of well-known brands

should be used with this unit. Avoid using USB

devices of unknown brands. Playback of

photos and music of only JPEG and MP3

format is supported. The output capability of

the USB port is 500 mA.

• This unit supports playback of video files

with AVI, TS, MP4, MKV, MOV extension, with

video codecs H264/AVC, H263, Divx,

MPEG1/2/4 and audio codecs PCM,

DD(AC3), MP3, AAC, H.265.

The above list of extensions and codecs

is for information only and is not a guarantee

that all files having the above extensions and

codecs should be read by this unit.

• Some AVI files cannot be played due to

their parameters and recording conditions.

Video files with AVI extension exceeding 2 GB

in size may be played partially.

According to the USB 1.1/2.0 Standard,

usage of a USB device with power current

consumption exceeding 500 mA is not

recommended without supplementary power

supply. Failure to use supplementary power for

connected USB drives with power consumption

exceeding this value as well as defective

USB drives may cause mechanical or thermal

changes of elements of this unit as well as

failure of internal elements of the USB port.

Such damages are not warrantee cases.

Warning: usage of external USB drives

containing BIN files in the root directory may

cause malfunction of the unit or damage to the

software.

File playback

Insert a USB into the USB jack. Press

SOURCE button, select USB option and

press OK button. The screen will show USB

playback menu.

USB

Photo

Music

Movie

•

Video file playback: Select Movie item

and press OK button. Press cursor buttons to

select a file and press OK button to start

playback. During playback press OK button to

show playback menu in which you can select

an operation by LEFT/RIGHT cursor buttons

and perform this operation by press-ing OK

button. The operations include Play/Pause,

FB, FF, Prev., Next, Charset, Repeat Mode,

Playlist, Info, Capture.

To exit video playback press EXIT button.

• Photo file playback: Select Photo item

and press OK button. Press cursor buttons

to select a file and press OK button to start

playback. During playback press OK button to

show playback menu in which you can select an

operation by LEFT/RIGHT cursor buttons and

perform this operation by pressing OK button.

The operations include: Play/Pause, Prev., Next,

Music, Info., Zoom In, Zoom Out, Move View,

Left, Right.

To exit photo playback press EXIT button.

• Music file playback: Select Music item and

press OK button. Press cursor buttons to select

a file and press OK button to start playback.

During playback press OK button to show

playback menu in which you can select an

operation by LEFT/RIGHT cursor buttons and

perform this operation by pressing OK button.

The operations include Play/Pause, FB,

FF, Prev., Next, Repeat Mode, Playlist, Info.

To exit music playback press EXIT button.

General Information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No picture, no

sound, and no

indicator light

The power cord is not plugged in.

Contrast, brightness, color and

volume are all in the minimum value

or TV is in mute mode.

Plug the power cord in.

Alter the value of contrast,

brightness, color and volume.

Picture and

sound with

abnormity

Contrast and color are set improperly.

Color system is set improperly.

Sound system is set improperly.

Set the value of Contrast and color

properly.

Set the sound system properly.

Picture is spotted

or with snow

Signal source is low-grade or the

signal is in a lower quality.

Use the qualified signal cord.

Blue background No video signal or the signal cord is

improperly/not connected.

Connect the signal cord properly.

No sound No audio signal or the signal cord is

improperly/not connected.

Connect the audio signal cord

properly.

Set the sound system properly.

The RC does not

work

Batteries are improperly installed or

exhausted.

Make sure the positive and the

negative polarities are correct.

Reattach the battery lid.

Replace the batteries.

Causes of interference

Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.

Local radiation however, can create disturbances, which visibly affect your picture. Proper

installations, a good aerial are your best safeguards against these disturbances.

• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or

receiving short-wave radio equipment.

• DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of

diathermy equipment from a nearby doctor’s surgery or hospital.

• SNOW: Weak TV signals from long distant stations result in an instead picture and give the

effect of falling snow. An antenna adjustment or antenna amplifier may be needed.

• GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,

hills, aircraft, etc. is minimized by correct aerial positioning.

• CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture

or make the picture roll.

General Information

Accessories

1 pc

2 pcs

4 pcs

1 pc

1. LED TV

2. Remote controller

3. Stand

4. Screw

5. Instruction manual

6. Specifications

The LED panel is a high technology product with many thin film transistors that can

give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen

as a fixed point of blue, green, red, black or white, please note that this does not affect the

performance of your LED TV.

Warning: For improvement reasons, specifications may be subject to change without prior notice.

Dimensions and weights are approximate.

21.5" (55 cm)

1920x1080

16:9

178°, 178°

6.5 ms

PAL, SECAM, NTSC

B/G, DK, I, L

2 x 3 W

99 analog/700 digital

1000 pages

AC ~180-240 V; 50 Hz

505 x 80 x 303 mm

505 x 137 x 340,7 mm

2.2 kg

from 5 to 35 °C

from 45% to 75%

from 86 to 106 kPa

(650-800 mm Hg)

Size (diagonal)

Resolution

Aspect ratio

View angle: vertical, horizontal

Response time

Color system

Sound system

NICAM stereo

Composite AV input (mini)

HDMI input

Headphone jack

Coaxial digital output

DVB-T/DVB-T2/DVB-C signal reception

PCMCIA interface (CI, CI+)

Russian and English OSD

Progressive scan

Digital comb filter

Sleep timer

USB movie, audio and photo support

Quantity of channels

Telete xt

Electric shock protection class

Nominal voltage range:

Unit dimensions: without stand

with stand

Net weight

Operating conditions

Ambient temperature

Relative humidity

Atmospheric pressure

Содержание

Уважаемый покупатель!

Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-

пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить

настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте

руководство для использования в будущем.

Перед покупкой рекомендуется

провести проверку оборудования:

- на отсутствие механических

повреждений конструкции, внешнего

оформления и упаковки, на

функционирование, на сохранность

пломб, на соответствие комплекта

поставки данным раздела

"Комплектность". Проведение проверки

на функционирование является

обязанностью продавца;

- на наличие гарантийного талона

- на правильность простановки в

гарантийном талоне даты продажи и

штампа продавца.

Рекомендуется сохранять товарный

(кассовый) чек, руководство по

эксплуатации с гарантийным талоном

до конца гарантийного срока

эксплуатации.

Содержание

Перед началом эксплуатации

Утилизация изделия

Меры предосторожности

Установка

Установка на подставку

Крепление на стену

Подключение

Подключение внешней антенны

Прочие подключения

Управление устройством

Элементы управления

Передняя панель

Задняя панель

Пульт дистанционного управления

Установка батареек

Общие операции

Операции с телетекстом

Экранное меню

Настройка блокировки

Электронный телегид

Запись цифровой программы

Функция TimeShift

Интерфейс CI

Операции с USB

Общая информация

Воспроизведение файлов

Общая информация

Руководство по устранению

неисправностей

Источники помех

Комплект поставки

Технические характеристики

Настройка изображения

Настройка звука

Настройка каналов

Настройка времени

Настройка параметров

Перед началом эксплуатации

Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с

обычным бытовым мусором. Существует отдельная система сбора использованных

электронных изделий в соответствии с законодательством, которая предполагает

соответствующее обращение, возврат и переработку.

Обращайтесь в органы местного управления за инструкциями по правильной

утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с

соблюдением обязательных процедур по обработке, утилизации и вторичной пере-

работке и, таким образом, предотвратите потенциальное негативное воздействие на

окружающую среду и здоровье людей.

Утилизация изделия

Меры предосторожности

• Пожалуйста, извлеките шнур пита-

ния из розетки и свяжитесь с сервисной

службой в следующих случаях: если в

устройстве имеются явные неисправности,

например, из него идет дым, чувствуется

специфический запах или слышен неха-

рактерный звук; если внутрь устройства

попала жидкость или посторонние предме-

ты; если нет изображения или звука; если

поврежден корпус или панель; если Вы

пользуетесь устройством согласно инструк-

ции, но оно не работает должным образом.

• Данное изделие может подключаться

к розетке питания как без заземляющего

третьего контакта, так и с заземляющим

третьим контактом.

• Во избежание поражения электриче-

ским током защищайте шнур питания от

возможного нажатия на него или защемле-

ния, особенно рядом с разъемами.

• Не закрепляйте шнур питания метизами.

• Если Вы не пользуетесь устройством

длительное время или в случае грозы

обязательно отключайте шнур питания из

розетки, а также отключайте все сигналь-

ные кабели от входных разъемов.

• При отключении вилки из розетки всег-

да держитесь за утолщение на вилке, не

касайтесь металлических частей, не тяните

за шнур и не ломайте и не перегибайте его,

не ремонтируйте, не перекручивайте и не

нагревайте.

• Немедленно свяжитесь с сервисным

центром, в случае если имеются какие-либо

неисправности шнура питания, в нем оголи-

лись жилы или он поврежден.

• Замените сетевую розетку, если в

нее невозможно вставить вилку или вилка

плохо закрепляется в розетке. Иначе могут

возникнуть неисправности или произойти

несчастные случаи или возгорания.

• Не прикасайтесь к проводам мокрыми

руками.

• Запрещается использование розетки, в

которую подключено несколько устройств.

Перегрузка такой розетки может привести

к пожару.

• Место подключения вилки шнура

питания к сети 220 В должно оставаться

легкодоступным.

• Перед работой с устройством необ-

ходимо полностью прочитать и понять все

инструкции. Необходимо соблюдать все пред-

упреждения и следовать всем инструкциям,

приведенным в настоящем руководстве.

• Пожалуйста, используйте только реко-

мендованные производителем аксессуары.

Перед началом эксплуатации

Использование других аксессуаров может

привести к неисправностям.

• Пожалуйста, проводите все настройки

и регулировки только с помощью кнопок

на передней и боковой панелях или на

пульте дистанционного управления. Ни в

коем случае не снимайте заднюю панель

и не пытайтесь самостоятельно проводить

техническое обслуживание устройства,

так как существует опасность поражения

электрическим током, а также возможно

возникновение неисправностей.

• Не устанавливайте устройство на

непрочные или неровные поверхности,

тележки, стойки, треноги, кронштейны

или столы. Устройство может упасть, в

результате чего могут возникнуть неисправ-

ности или произойти несчастные случаи.

Используйте только те приспособления,

которые рекомендованы производителем

или продавцом.

• Пожалуйста, устанавливайте устрой-

ство на горизонтальной поверхности в ме-

стах с хорошей вентиляцией. Не допускайте

воздействия на устройство вибрации, пря-

мого солнечного света, высокой температу-

ры, а также попадания пыли и влаги.

• Не ставьте на устройство вазы, сосуды

с жидкостью. Попадание жидкости внутрь

аппарата может привести к пожару или по-

ломке устройства.

• Не устанавливайте устройство в зоне

магнитных волн. Это может привести к по-

ломке устройства. В зоне электромагнитно-

го излучения может наблюдаться искаже-

ние изображения.

• Не устанавливайте вблизи устройства

источники открытого огня, например, свечи.

В случае их падения устройство может быть

повреждено или может произойти возгора-

ние.

• Установка телевизора в замкнутое

пространство при эксплуатации может со-

кратить срок службы устройства; поэтому

необходимо обеспечить минимальную

дистанцию между LED-телевизором и

внутренними границами приспособления

под аппарат для нормальной вентиляции

(минимум по 10 см свободного простран-

ства со всех сторон).

• Располагайте кабели позади устрой-

ства. Не закрепляйте их метизами, не пере-

гибайте, не ремонтируйте и не нагревайте.

• При перемещении телевизора не

нажимайте и не касайтесь панели. Не пере-

носите телевизор в положении, при котором

экран направлен вверх или вниз.

• Не перемещайте устройство при под-

ключенном проводе питания или других

подключенных проводах. Повреждение про-

вода питания, подключенный провод или

подключенные устройства могут стать при-

чиной пожара, электрошока или поломки.

• Если устройство тяжелее 18 кг, его

должны перемещать не менее 2 человек.

При падении устройство может повредиться.

• Слишком сильное нажатие на панель

может повредить устройство.

• При длительном использовании может

немного повысится температура корпуса

устройства. Это явление свидетельствует о

теплоотдаче в нормальном рабочем режи-

ме. Однако не позволяйте детям и людям с

повышенной температурной чувствительно-

стью касаться устройства.

После транспортировки в холодную

погоду (ниже 5° С) рекомендуется не

включать телевизор в течение как

минимум трех часов: за это время он

нагреется до комнатной температуры, а

весь конденсат испарится.

Все иллюстрации, приведенные в на-

стоящем руководстве, являются схе-

матическими изображениями, которые

могут отличаться от реальных объектов.

Установка/Подключение

Установка

Установка на подставку

Выберите ровную плоскую горизонталь-

ную поверхность, накройте ее мягкой тканью

и разместите на ней корпус телевизора

экраном вниз. Присоедините стойки к задней

части корпуса телевизора таким образом,

чтобы отверстия в стойках и в корпусе

совпадали. Зафиксируйте стойки с помощью

входящих в комплект винтов.

Крепление на стену

• Для крепления на стену на задней

панели телевизора имеются 4 отверстия под

винты. Расстояние между крепежными

отверстиями по горизонтали и вертикали

составляет 100*100 мм.

Для крепления следует использовать

настенный кронштейн стандарта VESA (в

комплект поставки не входит и приобретается

отдельно). Производитель не несет

ответственности за неправильно

выполненный монтаж, повлекший

повреждение телевизора.

ПРЕДУПРЕЖДЕНИЕ

Во избежание повреждений надежно

закрепите аппарат на стене в

соответствии с требованиями

инструкции по установке.

Средства для монтажа аппаратуры на

стене или потолке должны быть доста-

точными для выполнения своей функ-

ции.

Рекомендуется только вертикальное

расположение устройства.

ВНИМАНИЕ

До включения аппаратуры в

электрическую сеть необходимо

ознакомиться с мерами электрической

и противопожарной безопасности,

приведенными в разделе "Меры

предосторожности" настоящего

Руководства по эксплуатации.

Страница загружается ...

Telefunken TF-LED42S14T2 Руководство пользователя

Бренд: Telefunken

Модель: TF-LED42S14T2

Категория: ЖК-телевизоры

Тип: Руководство пользователя

Это руководство также подходит для

Скачать PDF

сообщить о нарушении

Telefunken TF-LED42S14T2 Руководство пользователя

Это руководство также подходит для

Telefunken TF-LED42S14T2 Руководство пользователя

Похожие модели бренда

Модели других брендов