Yamaha YSP-3300 Инструкция по применению

Тип
Инструкция по применению

Это руководство также подходит для

Digital Sound Projector™
Owner’s Manual
English
for Europe, Asia, Africa, Oceania,
and Latin America
2 En
What you can do with this unit
Make sure you read precaution in “Safety and Accessory Information” (separate booklet) carefully before using this unit.
Audio/video device
TV Blu-ray disc player
Preparation
Installing the unit
Connections/Basic settings
Connecting a satellite/
cable TV tuner
Connecting a Blu-ray
disc player
Operating this unit using a TV’s
remote control (HDMI control)
Playback
Basic operation for playback
Various functions
HDMI control (link) function TV remote repeater function
UniVolume IntelliBeam
System memory Eco function
p. 11
p. 19 p. 18
p. 30
p. 32
p. 30 p. 12
p. 40 p. 23
p. 28 p. 41
3 En
Game console
iPod or USB device
over a USB
connection
(YSP-4300 only)
iPod or computer
over a wireless
connection
FM tuning
(YSP-4300 only)
Preparing the remote control
Connecting a TV
Connecting a game
console
Connecting an indoor
FM antenna
Setting appropriate surround effects automatically (IntelliBeam)
Playing an iPod or
USB device
Playing an iPod or
computer
FM tuning
(YSP-4300 only)
CINEMA DSP Compressed Music Enhancer
Target playback Wireless playback for an iPod or computer
Playback for an iPod or USB device over a
USB connection (YSP-4300 only)
FM tuner (YSP-4300 only)
p. 16
p. 18
p. 19 p. 20
p. 23
p. 50 p. 50 p. 44
p. 34 p. 33
p. 39 p. 50
p. 50 p. 44
4 En
Contents
PREPARATION
Controls and functions...............................................5
Center unit front panel (front, top)........................................... 5
Center unit rear panel (back) .................................................. 6
Subwoofer rear panel (back)................................................... 7
Front panel display.................................................................. 8
Remote control........................................................................ 9
Installation .................................................................11
Recommended installation.................................................... 11
Conditions that make it difficult for sound beams to achieve
surround sound ..................................................................... 11
Enjoying surround effects regardless of conditions
(My Surround)....................................................................... 12
If the TV remote control does not work properly after the center
unit is installed (TV Remote Repeater function) ................... 12
If the center unit cannot be installed on a TV stand
(increasing the height of the center unit)............................... 12
Positioning the subwoofer on its side.................................... 13
Installing this unit .................................................................. 14
Preparing remote control ..............................................16
Installing the batteries........................................................... 16
Operation range .................................................................... 16
Connections ..............................................................17
Connecting a TV and a Blu-ray disc player...................18
Connecting a game console or
satellite/cable TV tuner .................................................19
Connecting the FM antenna (YSP-4300 only) ..............20
Connecting the wireless subwoofer ..............................20
Initial settings............................................................21
Establishing a wireless connection ...............................21
Group IDs.............................................................................. 21
Displaying the menu screen on the TV .........................21
Selecting the language for menu display ......................22
Auto setup for appropriate surround effects
(IntelliBeam)..................................................................23
Installing the IntelliBeam microphone ................................... 23
Using AUTO SETUP (IntelliBeam)........................................ 24
Saving this unit’s settings to system memory ....................... 28
Operating the unit by TV’s remote control
(HDMI control)...............................................................30
PLAYBACK
Playback features......................................................32
Basic operation for playback.........................................32
Enjoying sound based on your preference ...................33
Switching between surround playback, stereo playback, and
target playback modes.......................................................... 33
Playing back digitally compressed formats (MP3, WMA, etc.)
with enriched sound (Compressed Music Enhancer) ........... 33
Adjust volume for each channel............................................ 33
Enjoying realistic surround sounds (CINEMA DSP) ............. 34
Changing the audio output method for surround playback ... 36
Setting the surround decoder................................................ 38
Delivering sound to a specified location
(Target playback mode)........................................................ 39
Using useful features ....................................................40
Automatic volume level adjustment (UniVolume) ................. 40
Saving energy with the Eco function..................................... 41
Switching information displayed in the front panel display.... 41
Settings each input source (Option menu)............................ 42
FM tuning (YSP-4300 only)...........................................44
Tuning into the desired FM station (Frequency tuning) ........ 44
Receiving weak signal ...........................................................45
Registering FM stations and tuning in (Preset tuning)...........45
Displaying the Radio Data System information
(Europe model only) ..............................................................48
Playing music stored on an iPod or computer
over a wireless connection........................................... 50
Playing music stored on an iPod or USB device
over a USB connection (YSP-4300 only) ..................... 50
Connecting an iPod ...............................................................50
Operating an iPod via the TV screen.....................................51
Using the iPod to control operation .......................................54
Charging the iPod..................................................................55
Connecting a USB device......................................................56
Operating a USB device via the TV screen ...........................57
SETTINGS
Setup menu............................................................... 60
Setting the setup menu ................................................ 60
Setup menu list ............................................................ 61
BEAM settings.............................................................. 62
HORIZONTAL ANGLE ..........................................................62
BEAM TRAVEL LENGTH......................................................62
FOCAL LENGTH ...................................................................62
IMAGE LOCATION................................................................63
CHANNEL OUT.....................................................................63
SOUND settings........................................................... 64
SPEAKER LEVEL .................................................................64
Adaptive DRC........................................................................64
DYNAMIC RANGE ................................................................65
Dolby PLIIx PARAMETER.....................................................65
HDMI setup .................................................................. 65
HDMI CONTROL...................................................................65
HDMI AUDIO OUT.................................................................65
TV INPUT ..............................................................................65
AirWired settings .......................................................... 66
iPod INTERLOCK..................................................................66
GROUP ID.............................................................................66
DISPLAY settings......................................................... 67
DIMMER ................................................................................67
OSD LANGUAGE ..................................................................67
DISTANCE UNIT ...................................................................67
INFORMATION settings............................................... 67
AUDIO ...................................................................................67
VIDEO ...................................................................................67
SYSTEM................................................................................67
Advanced setup........................................................ 68
TROUBLESHOOTING
Troubleshooting ....................................................... 70
General..................................................................................70
FM tuner (YSP-4300 only).....................................................72
USB device (YSP-4300 only) ................................................72
Remote control ......................................................................72
Messages .................................................................. 73
iPod (when connected via USB jack)/
USB device (YSP-4300 only) ................................................73
APPENDIX
Glossary.................................................................... 74
Specifications........................................................... 76
Available signal information ......................................... 78
Index.......................................................................... 79
About this manual
In this manual, operations that can be performed using either the front panel keys or the remote control are explained using the
remote control.
In this manual, iPod(s), iPhone(s), and iPad(s) are hereafter referred to collectively as iPod(s).
y indicates a tip for your operation.
Notes contain important information and operating instructions.
In this manual, the YSP-CU4300 center unit is used for illustrative purposes. Illustrations for both the YSP-CU4300 and
YSP-CU3300 are provided where necessary.
5 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
PREPARATION
Controls and functions
1 Remote control sensor
Receives infrared signals from the remote control (p. 9).
2 Remote control sensor of a TV
Receives infrared signals from the TV remote control when
the TV Remote Repeater function is enabled (p. 12).
3 Wireless module
Receives and sends wireless signals. Do not place metal
objects in front of the wireless module as they may interfere
with the wireless module’s ability to receive and send
wireless signals.
4 Front panel display
Shows information about the operational status of this unit
(p. 8).
5 USB jack (YSP-4300 only)
Enables connection of a USB device (p. 50, 56).
6 SURROUND indicator
Lights up according to the input signal.
7 STATUS indicator
Lights up when the power is turned on, and goes off in the
standby mode.
8 INPUT key
Selects the playback component (p. 32).
9 VOLUME (+/-) key
Adjusts the volume of the unit (p. 32).
0 key
Turns on the unit or set it to the standby mode.
Center unit front panel (front, top)
12 3 4 5 67
890
YSP-CU4300
467
890
12 3
YSP-CU3300
Displayed
color
Input signal
Blue Following surround audio signal formats:
Dolby TrueHD, Dolby Digital Plus, DTS-HD
Master Audio, DTS-HD High Resolution,
Multi-channel Linear PCM
Orange Surround audio signal other than above
Off Stereo/monaural audio signal or no signal
In the standby mode, this unit consumes a small amount of
power in order to search for HDMI signals or to receive
infrared signals from the remote control.
Note
Controls and functions
6 En
1 FM ANTENNA jack (YSP-4300 only)
Connect an FM antenna (p. 20).
2 INTELLIBEAM MIC jack
Connect the supplied IntelliBeam microphone (p. 24).
3 INPUT ANALOG L/R jacks
For connecting analog cable to the external components
(p. 19).
4 AUX INPUT DIGITAL jack
For connecting a coaxial digital audio cable to the external
components (p. 19).
5 IR IN
1)
/OUT jacks
Control expansion jacks for commercial use only.
6 HDMI OUT (ARC) jack
For connecting an HDMI compatible TV and monitor
(p. 18).
7 HDMI IN jacks
For connecting HDMI compatible Blu-ray disc player,
satellite and cable TV tuner and game console (p. 18, 19).
8 RS-232C terminal
A control expansion terminal for commercial use only.
9 INPUT DIGITAL TV/OPTICAL jacks
For connecting an optical cable to the external components
(p. 18, 19).
0 TV Remote Repeater
Receives signals from a TV remote control via the front of
the center unit and transmits those signals to the TV when the
center unit obstructs the remote control sensor on the TV
(p. 12).
a Power cable
For connecting to an AC wall outlet (p. 18).
Center unit rear panel (back)
12 3 54
6789
0A
Only for Europe and China models
1) y
Controls and functions
7 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
1 Group ID switches
When the center unit and subwoofer are connected
wirelessly, sound is output from the subwoofer (AirWired).
For a wireless connection, use the same group ID as the
center unit and YIT-W12TX (p. 20).
2 LINK indicator
Shows wireless connection status (p. 21).
3 Heat discharge unit
Discharges heat generated inside the subwoofer. Do not
cover the heat discharge unit.
4 Power cable
For connecting to an AC wall outlet (p. 20).
Subwoofer rear panel (back)
A
B
C
1
2
3
LINK
A
B
C
1
2
3
LINK
1
2
4
3
Controls and functions
8 En
1 Playback indicators (YSP-4300 only)
Lights while music stored on an iPod or USB device
connected to the USB jack is playing (p. 50, 56).
2 TARGET indicator
Lights when target playback mode enabled (p. 39).
3 Tuner indicators (YSP-4300 only)
Lights up when this unit is tuned into an FM station
(p. 44).
4 REPEATER indicator
Lights when the TV Remote Repeater function is enabled
(p. 10).
5 Wireless indicators
TX Lights while the connection to the subwoofer is being
established (p. 20).
RX Lights while the connection to YIT-W12TX is being
established. For details of YIT-W12TX, refer to
“Safety and Accessory Information” (separate
booklet).
6 VOL indicator
Indicates the current volume level (p. 32).
7 HDMI indicator
Lights up when HDMI signals are input.
8 CINEMA DSP indicator
Lights up when a sound field program is selected (p. 34).
9 UNIVOLUME indicator
Lights up when the UniVolume function is enabled (p. 40).
0 Radio Data System indicators (Europe model
only)
Lights according to the current Radio Data System status
(p. 48).
a ENHANCER indicator
Lights up when the Compressed Music Enhancer function is
enabled (p. 33).
b Multi information display
Display playback device input source and surround
information (p. 41). Displays settings and information as
alphanumeric characters.
Front panel display
1)
12 3 45 6
789
0A B
Note that the front panel display turns off when the Eco function is
enabled and remains off unless an operation is performed.
1) y
Controls and functions
9 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
1 BEAM key
Switches the sound beam output method (p. 37).
2 ENHANCER key
Turns Compressed Music Enhancer to on or off (p. 33).
3 Input selector keys
Select the playback component (p. 32).
4 CINEMA DSP program keys
When playback is in surround playback mode, select the
CINEMA DSP programs (p. 34).
5 SURROUND key
Switches to surround playback mode (p. 34).
6 S/T/W/X keys, ENTER key
Change the setting (p. 60).
7 SETUP key
Displays the setup menu (p. 60).
8 OPTION key
Displays the option menu for each input source (p. 42).
9 TARGET key
Switches to target playback mode (p. 39).
0 SUBWOOFER (+/-) key
Adjusts the volume of the subwoofer.
Remote control
1
I
H
J
K
L
M
N
O
P
Q
2
3
4
5
C
6
7
8
9
0
A
B
E
F
G
D
Infrared signal transmitter
O
P
E
YSP-3300
Controls and functions
10 En
a MUTE key
Mute the sound (p. 32).
b SYSTEM MEMORY keys
Saves IntelliBeam measurements, speaker volume, and other
settings (p. 28).
c FM key (YSP-4300 only)
Switches this unit’s input source to FM radio.
d Tuner operation keys (YSP-4300 only)
Press to select or register an FM station (p. 44).
e CH LEVEL key
Adjusts the volume balance during playback (p. 33).
f USB key (YSP-4300 only)
Switches this unit’s input source to USB (p. 50).
g Playback operation keys (YSP-4300 only)
Perform playback operations for music stored on an iPod or
USB device (p. 50).
h Transmission indicator
Lights with operation using this unit’s remote control.
i key
Turns on the unit or set it to the standby mode (p. 32).
j STEREO key
Switches to stereo playback mode (p. 33).
k RETURN key
Returns to the previous menu screen.
l INFO key
Switches the information display on the front panel as
follows.
Input: Input name
Beam: Beam mode setting (stereo, beam stereo, target, or
surround playback mode)
Decoder: Sound signal decoder currently selected
Cinema DSP: Sound field program of CINEMA DSP
(only in surround playback mode)
Information displayed varies according to the selected input
source (p. 41, 53, 55, 58).
This key is also used to select a desired Radio Data System
display mode (Europe model only) (p. 48).
m UNIVOLUME key
Turns the UniVolume function on or off (p. 40).
n VOLUME (+/-) key
Adjusts the volume of the unit (p. 32).
o ECO key
Turns the Eco function on or off (p. 41).
p REMOTE REPEATER key
Turns the TV Remote Repeater function on or off (p. 12).
q iPod CONTROL key (YSP-4300 only)
Press to display the iPod browse/playback screen on the TV
(p. 53).
Demo mode
This unit outputs sound beam down-mixed to 1 channel
moving horizontally to right and left. By this function, you
can feel how sound beam is output from this unit.
To activate Demo mode:
1 Press the TARGET key on the remote control.
2 Press the CINEMA DSP OFF key.
“AUTO DEMO” is shown in the front panel display when
demo mode starts.
To exit demo mode, press the CINEMA DSP OFF key
again. The display returns to target playback mode display.
11 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Installation
To achieve desired surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound
waves, referred to as “sound beam(s)” in this manual (p. 14). Depending on the location where the unit is installed, it may be easier to
connect external devices such as a TV first. See “Connections” (p. 17).
Some TVs have sensors such as the motion sensor or signal transmitter for 3D glasses in front. Installing the center unit may interrupt
the sensors or signal transmitter from functioning. Set the center unit away from your TV.
Center unit
Install the center unit in the center of the left and right walls.
Place the center unit on a TV stand in front of the TV.
Use the TV Remote Repeater function if the center unit
obstructs the remote control sensor on the TV (p. 12).
Increase the height of the center unit if the TV stand is too high
for center unit installation (p. 12).
The listening position (such as sofa, etc.) should be located at
the front of the center unit.
The distance between the listening position and the center unit
should be more than 1.8 m.
This unit can be mounted on a wall using WALL MOUNT
BRACKET SPM-K20 (option). Refer to the SPM-K20 Install
Manual and SPM-K20 Information for YSP-CU4300/
YSP-CU3300.
Subwoofer
To prevent sound reflecting off of walls, angle the subwoofer
slightly toward the center of the room.
When installing the subwoofer on a rack, be sure the rack is
strong enough to support the subwoofer and that it leaves
sufficient space for heat discharge.
The center unit and subwoofer communicate wirelessly.
Subwoofer performance may be affected if the subwoofer is
placed on a metal rack, or if there is a metal plate between the
subwoofer and the center unit.
The subwoofer can also be placed on its side (p. 13).
This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects
produced by this unit may not be sufficient when this unit is installed in the following locations.
Rooms with walls inadequate for reflecting sound beams
Rooms with acoustically absorbent walls
Rooms with measurements outside the following range:
W (3 to 7 m) × H (2 to 3.5 m) × D (3 to 7 m)
Rooms with less than 1.8 m from the listening position to this
unit
Rooms where objects such as furniture are likely to obstruct
the path of sound beams
Rooms where the listening position is close to the walls
Rooms where the listening position is not in front of this unit
Recommended installation
Notes
This unit requires sufficient space for heat discharge.
A minimum of 5 cm above and behind and 1 cm to the sides of the center unit
A minimum of 20 cm above, behind, and to the sides of the subwoofer
Do not cover the subwoofer heat discharge unit on the back of the subwoofer.
Be sure to install this unit where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.
When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV.
If the picture on your TV screen becomes blurred or distorted, we recommend moving this unit away from your TV.
Center unit Subwoofer
Conditions that make it difficult for sound beams to achieve surround sound
Installation
12 En
The My Surround function creates rich surround sound effects in rooms with less than optimal surround sound conditions (p. 11). See
“Changing the audio output method for surround playback” (p. 36, 37) for more information.
The TV may not respond to commands from
its remote control if the center unit obstructs
the remote control sensor on the TV. Should
this occur, press the REMOTE
REPEATER key on this unit’s remote
control more than 3 seconds to set the TV
Remote Repeater function to enable. The
REPEATER indicator on the front panel
display will light.
When the TV remote control is aimed at the
center unit’s remote control sensor, the TV
Remote Repeater on the back of this unit
transmits signals from the TV remote control
to the TV.
Signals from the TV remote control can be transmitted to the TV while this unit is in standby mode.
This function can be used while the TV remote control is using infrared signals.
In most cases, the center unit can be placed on a TV stand. The supplied spacers can be attached to increase the height of the unit if
necessary. Attach both the left and right spacers to the unit.
Removing the spacers
Pull the spacers straight up.
Enjoying surround effects regardless of conditions (My Surround)
If the TV remote control does not work properly after the center unit is installed (TV Remote
Repeater function)
Note
If the center unit cannot be installed on a TV stand (increasing the height of the center unit)
TV remote control
sensor
TV Remote Repeater
TV remote control
Align the protrusions on the back of the spacer with the
mounting holes on the bottom of the center unit and press
the spacer firmly into place.
Spacer
Protrusions
Mounting holes
Bottom of the center unit
Pull the spacer straight up.
Installation
13 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
The subwoofer can be laid on its side when positioned on a rack.
Positioning the subwoofer on its side
Removing the legs
and sheets
Turn clockwise
Turn counterclockwise
Attaching the legs
and sheets
Leg
Sheet
Installation
14 En
This unit outputs sound beam as shown in the illustrations below. Install this unit where there are no obstacles such as furniture
obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved.
You may install this unit in parallel with the wall or in the corner.
Parallel installation
Install this unit as close to the exact center of the wall as possible.
Ideal installation condition
Install this unit as close to the exact front of your normal listening position as possible.
The distance between listening position and the unit should be more than 1.8 m.
Installing this unit
Parallel installation
Install this unit in the exact center of the wall when it is measured
from the left and right corners.
Corner installation
Install this unit in the corner at a 40° to 50° angle from the
adjacent walls.
Objects, such as
furniture
40° to 50°
Parallel installation
(with 5Beam)
Corner installation
(with Stereo+3Beam)
Objects, such as furniture
More
than
1.8 m
More
than
1.8 m
Installation
15 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Installing in a non-square room
Install this unit so that the sound beams can be reflected off the walls.
Example for installing the unit in living room
Irregularly shaped rooms with solid walls on all side
Irregularly shaped rooms that are open to a hallway on one side
As sound beams normally pass through tables, tables are not
obstacles. And a cupboard installed facing the wall reflects
sounds.
In a case of the listening room as shown in the right illustration,
adjusting the position of the right channel after AUTO SETUP
(p. 23) enables to achieve more desired surround sound
effects (p. 63).
As the curtains absorb sounds, the sound features of the
listening room is different from the case with the curtain opened
and the case with the curtain closed. Using saving settings
function enables to save the best settings for each case of
listening room (p. 28).
Objects, such as
furniture
Installation
16 En
Before installing batteries or using the remote control, be sure to read battery and remote control precautions in “Safety and Accessory
Information” (separate booklet).
Preparing remote control
Installing the batteries
Battery × 2
(AAA, R03, UM-4)
Pull up on the
latch to release
the cover
Insert the
protrusions
into the slots
and close the
cover
Operation range
Within 6 m
17 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Connections
When external devices such as a TV, Blu-ray disc player, and/or game console are connected, audio
and video signals are transmitted as shown below.
Audio connection
Video connection
Audio and video connection
This unit: Plays audio from TV broadcasts, Blu-ray discs, etc.
Game console
(HDMI compatible)
Satellite and cable TV tuner
(not HDMI compatible)
TV: Plays video from TV
broadcasts, Blu-ray disc
player, etc.
Blu-ray disc player
HDMI cable
HDMI cable
HDMI cable
Optical cable
Use to connect a TV that does not
support audio return channel
(ARC) to this unit (p. 18).
Composite video cable
Optical cable
Connections
18 En
For the cable connection, follow the procedure below.
Connecting a TV and a Blu-ray disc player
1
HDMI cable (optional)
Input the digital audio/video signals
of the Blu-ray disc player to this unit.
2
HDMI cable (optional)
The digital video of the Blu-ray disc
player is reflected on TV.
3
Optical cable (supplied)
Play back digital sounds of TV on
this unit.
Do not connect the power cable until all connections are completed.
Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.
HDMI INPUT
123
HDMI
OUTPUT
OPTICAL
OUTPUT
To AC wall outlet
Blu-ray disc player
1. Remove the cap
2. Check the direction of
the plug
TV
Video signals
Audio signals
1
2
3
1)
Audio return channel (ARC) supported TV
Connect an HDMI cable to the audio return channel supported jack
(the jack with “ARC” indicated) on TV. In this case, you do not need
to connect an optical cable.
Activate the HDMI control function of this unit so as to activate the
audio return channel (ARC) (p. 65).
What is audio return channel (ARC)?
A function transmits digital audio signal output from TV to this unit
through an HDMI cable. By this function, an optical cable to connect TV
and this unit is not needed.
1) y
Connections
19 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Connecting a game console or satellite/cable TV tuner
External device (example) Connecting cable
HDMI compatible
1 Satellite/cable TV tuner
HDMI cable (optional)
2 Game console
HDMI cable (optional)
3 Game console
HDMI cable (optional)
not HDMI compatible
4 Satellite/cable TV tuner
Optical cable (supplied)
Composite video cable (optional)
5 Game console
RCA stereo cable (optional)
Composite video cable (optional)
HDMI
OUTPUT
HDMI
OUTPUT
HDMI
OUTPUT
OPTICAL
OUTPUT
VIDEO
OUTPUT
VIDEO
INPUT
VIDEO
INPUT
VIDEO
OUTPUT
ANALOG
OUTPUT
RL
Video signals
Audio signals
TV
1
4
2 3
5
To AC wall outlet
2)
To connect a device with an AUX output jack, connect its AUX output
jack to the AUX INPUT DIGITAL (coaxial) jack on this unit via a
commercial coaxial digital audio cable.
2) y
Connections
20 En
Connect the supplied FM antenna via the FM ANTENNA jack.
To connect the subwoofer (NS-WSW160) to the center unit
wirelessly (AirWired), the same group ID must be assigned to the
center unit and subwoofer. The default group ID for both
components is A1, enabling wireless connection by simply
plugging the subwoofer's power cable into an electrical outlet.
When using the transmitter (YIT-W12TX)
1)
, the same group ID
must be assigned to the center unit and subwoofer. The default
group ID of YIT-W12TX is A1.
The LINK indicator lights when the subwoofer is on and the
subwoofer and center unit are connected wirelessly.
When the center unit enters standby mode, the subwoofer and
LINK indicator turn off.
Connecting the FM antenna (YSP-4300 only)
Connecting the wireless subwoofer
FM antenna
y Tip
See page 21 for more information on group ID.
A
B
C
1
2
3
LINK
A
B
C
1
2
3
LINK
Group ID switches
LINK indicator
Blinks: Establishing
connection
Lights: Connection
established
To AC wall outlet
For details of YIT-W12TX, refer to “Safety and Accessory Information”
(separate booklet).
1) y
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82

Yamaha YSP-3300 Инструкция по применению

Тип
Инструкция по применению
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ