Owner’s Manual
Mode d’emploi
Инструкция по эксплуатации
EnglishFrançais
Русский
2
En
This product is designed for use at home to enjoy listening to audio.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE USE. BE
SURE TO FOLLOW THESE INSTRUCTIONS.
The precautions listed below are to prevent
risk of harm to the user and others, as well as
to prevent property damage, and to help the
user use this unit properly and safely. Be sure
to follow these instructions.
After reading this manual, be sure to keep it in a
safe place where it can be referenced at any time.
WARNING
This content indicates “risk of serious injury
or death.”
Power supply/AC adaptor
• Do not do anything that could damage the power
cord.
- Do not place it near a heater.
- Do not bend it excessively or alter it.
- Do not scratch it.
- Do not place it under a heavy object.
Using the power cord with the core of the cord
exposed could cause electric shocks or a fire.
• Do not touch the power plug or cord if there is a
chance of lightning. Failure to observe this may
cause electric shocks.
• Use this unit with the power supply voltage
printed on it. Failure to connect to an appropriate
AC outlet may cause a fire, electric shocks, or
malfunctions.
• Be sure to use the supplied AC adaptor. Failure to
observe the above may cause a fire, burns, or
malfunctions.
• Check the electric plug periodically and remove
any dirt or dust which may have accumulated on
it. Failure to observe this may cause a fire or
electric shocks.
• When setting up the unit, make sure that the AC
outlet you are using is easily accessible. If some
trouble or malfunction occurs, immediately turn
off the power switch and disconnect the plug
from the AC outlet. Even when the power switch
is turned off, as long as the power cord is not
unplugged from the wall AC outlet, the unit will
not be disconnected from the power source.
• If you hear thunder or suspect approaching
lightning, quickly turn off the power switch and
pull the power plug from the AC outlet. Failure to
observe this may cause a fire or malfunctions.
• If not using the unit for long periods of time, be
sure to pull the power plug from the AC outlet.
Failure to observe this may cause a fire or
malfunctions.
Do not disassemble
• Do not disassemble or modify this unit. Failure to
observe this may cause a fire, electric shocks,
injury, or malfunctions. If you notice any
irregularities, be sure to request an inspection or
repair from the dealer where you purchased the
unit or from qualified Yamaha service personnel.
• Be sure to request inspections or repairs from
the dealer where you purchased the unit or
from qualified Yamaha service personnel.
• Yamaha cannot be held responsible for injury
to you or damage of the products caused by
improper use or modifications to the unit.
• This product is for ordinary homes. Do not use
for applications requiring high reliability, such
as managing lives, health care or high-value
assets.
3
English
En
Water warning
• Do not expose the unit to rain, use it near water
or in damp or wet conditions, or place on it any
containers (such as vases, bottles or glasses)
containing liquids which might spill into any
openings or places where water may drop. A
liquid such as water getting into the unit may
cause a fire, electric shocks, or malfunctions. If
any liquid such as water seeps into the device,
turn off the power immediately and unplug the
power cord from the AC outlet. Then, request an
inspection from the dealer where you purchased
the unit or from qualified Yamaha service
personnel.
• Never insert or remove an electric plug with wet
hands. Do not handle this unit with wet hands.
Failure to observe this may cause electric shocks
or malfunctions.
Fire warning
• Do not place any burning items or open flames
near the unit, since they may cause a fire.
If you notice any abnormality
• If any of the following abnormalities occur,
immediately turn off the power and disconnect
the power plug.
- The power cord/plug is damaged.
- An unusual smell or smoke is emitted from the
unit.
- Foreign material gets into the interior of the
unit.
- There is a crack or damage in the unit.
Continued use could cause electric shocks, a fire,
or malfunctions. Immediately request an
inspection or repair from the dealer where you
purchased the unit or from qualified Yamaha
service personnel.
• Be careful not to drop or apply strong impact to
this unit or the AC adaptor. If you suspect the unit
may have been damaged due to dropping or
impact, immediately turn off the power and pull
the power plug from the AC outlet. Failure to
observe this may cause electric shocks, a fire, or
malfunctions. Immediately request an inspection
from the dealer where you purchased the unit or
from qualified Yamaha service personnel.
CAUTION
This content indicates “risk of injury.”
Power supply/AC adaptor
• Do not cover or wrap the AC adaptor with a cloth
or blanket. Failure to observe this may trap heat,
causing deformation in the case or a fire.
• Do not use an AC outlet where the power plug fits
loosely when inserted. Failure to observe this may
cause a fire, electric shocks, or burns.
• When removing the electric plug from the unit or
an AC outlet, always hold the plug itself and not
the cord. Pulling by the cord can damage it and
cause electric shocks or a fire.
• Insert the power plug firmly all the way into the
AC outlet. Using the unit when it is not plugged in
sufficiently can cause dust to accumulate on the
plug, causing a fire or burns.
Installation
• Do not place the unit in an unstable position
where it might accidentally drop or fall over and
cause injuries.
• Ensure that the top is facing upwards. Failure to
observe this may cause malfunctions or for the
unit to fall and cause injury.
• Do not install the unit in places where it may
come into contact with corrosive gases or salt air
or places that have excessive smoke or steam.
Doing so may result in malfunction.
• Avoid being near the unit during a disaster, such
as an earthquake. Since the unit may turn over or
fall and cause injury, quickly move away from the
unit and go to a safe place.
4
En
• Before moving this unit, be sure to turn off the
power switch and disconnect all connection cables.
Failure to observe this may damage the cables or
cause you or someone else to trip and fall.
Hearing loss
• Before connecting the unit to other devices, turn
off the power for all devices. Failing to do so may
result in hearing loss, electric shock, or device
damage.
• When turning on the AC power in your audio
system, always turn on the amplifier or receiver
LAST, to avoid hearing loss and speaker damage.
When turning the power off, the amplifier or
receiver should be turned off FIRST for the same
reason. Failure to observe the above may cause
hearing impairment or speaker damage.
Maintenance
• Remove the power plug from the AC outlet before
cleaning the unit. Failure to observe this may
cause electric shocks.
Handling caution
• Keep small parts out of the reach of infants. Your
children may accidentally swallow them.
• Do not do the following:
- stand on or sit on the equipment.
- put heavy items on top of the equipment.
- place the equipment in a stack.
- apply unreasonable force to buttons,
switches, input/output terminals, etc.
- lean against the equipment.
• Avoid pulling the connected cables to prevent
injuries or damage to the unit by causing it to fall.
Notice
Indicates points that you must observe in
order to prevent product failure, damage, or
malfunction.
Power supply/AC adaptor
• If not using the unit for a long period of time, be
sure to pull the power plug from the outlet. A
minute current is still flowing even if the power
has been turned off (the power is in standby).
Installation
• Do not use this unit in the vicinity of other
electronic equipment, such as a TV, radio, or
mobile phone. Failure to observe this may cause
this unit or the TV or radio to produce noise.
• Do not use this unit in a location that is exposed
to direct sunlight that becomes extremely hot,
such as near a heater, or extremely cold, or that is
subject to excessive dust or vibration. Failure to
observe this may cause the unit’s panel to
become deformed, the internal components to
malfunction, or for operation to become unstable.
Connections
• If connecting external units, be sure to thoroughly
read the manual for each unit and connect them
in accordance with the instructions.
Failure to properly handle a unit in accordance
with the instructions could cause malfunctions.
Handling
• Do not place plastic or rubber products on this
unit. Failure to observe this may cause
discoloration or deformation in the panel of this
unit.
• If the ambient temperature changes drastically
(such as during unit transportation or under rapid
heating or cooling) and there is a chance
condensation may have formed in the unit, leave
the unit for several hours without turning on the
power until it is completely dry before use. Using
the unit while there is condensation can cause
malfunctions.
Maintenance
• If the temperature or humidity changes drastically,
water droplets (condensation) may form on the
unit surface. If water droplets form, immediately
wipe them off with a soft cloth. If water droplets
are left on the unit, they may be absorbed into the
wooden parts, causing deformation.
• When cleaning the unit, use a dry, soft cloth.
Using chemicals such as benzine or thinner,
cleaning agents, or chemical scrubbing cloths
can cause discoloration or deformation.
5
English
En
Information
About content in this manual
• The illustrations in this manual are for instructional
purposes only.
• The company names and product names in this
manual are the trademarks or registered
trademarks of their respective companies.
About the name plate of the unit
(bottom_en_01)
The model number, serial number, power
requirements, etc., may be found on or near the
name plate, which is at the bottom of the unit. You
should note this serial number in the space provided
below and retain this manual as a permanent record
of your purchase to aid identification in the event of
theft.
Model No.
Serial No.
6
En
7
English
En
Contents
Before you start 8
Features of this unit. . . . . . . . . . . . . . . . . . . . . . . . . . 8
About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Check the supplied accessories . . . . . . . . . . . . . . . . 9
Handling records . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Parts and their functions . . . . . . . . . . . . . . . . . . . . . 10
Top panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Back panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Getting ready 12
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Assembling the unit . . . . . . . . . . . . . . . . . . . . . . . . 12
Attaching the dust cover . . . . . . . . . . . . . . . . . . . . 14
Making connections . . . . . . . . . . . . . . . . . . . . . . . . 15
Making adjustments . . . . . . . . . . . . . . . . . . . . . . . . 16
Adjusting the stylus pressure . . . . . . . . . . . . . . . . . 16
Adjusting the anti-skating . . . . . . . . . . . . . . . . . . . . 18
Turning the power on . . . . . . . . . . . . . . . . . . . . . . . 18
Playback 19
When necessary 22
Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Replacing the belt . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Replacing the record stylus. . . . . . . . . . . . . . . . . . . 23
Moving this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
8
En
Before you start
Features of this unit
This is a turntable for playing analog records.
Wooden cabinet with a gloss finish
Provides both beauty and practical advantages such as high rigidity and
vibrational damping
Highly rigid straight tone arm virtually eliminates any effect on the
delicate musical signal
Easy switching between LINE output equipped with a high-quality
PHONO EQ circuit and PHONO direct output, giving you flexibility when
setting up your record playback system
High rotational stability is achieved by using an aluminum die cast
platter belt-driven by a high-torque DC motor
Feedback margin is maintained by insulators (feet) that feature excellent
absorption of vibration and shock
About this manual
When reading this manual, please note the following.
Specifications and appearance are subject to change without notice in
order to improve the product.
Explanation of graphic symbols used in this manual:
-“ WARNING” indicates points that you must observe to avoid risk
of death or serious injury.
-“ CAUTION” indicates points that you must observe to avoid risk
of injury.
- indicates points that you must observe to avoid
damaging the product or causing it to malfunction.
- indicates supplementary information that you will find
useful.
NOTICE
NOTE
Before you start | Check the supplied accessories
9
English
En
Check the supplied accessories
Make sure that all items are present.
Handling records
When you hold a record, you should either support the record’s label area and
its outer edge, or hold the record’s outer edges between your two hands.
Platter ×1 Platter sheet ×1 Belt ×1
* The belt is installed on the
platter.
Counter weight ×1 Head shell ×1
(with cartridge)
45 rpm adaptor ×1
Dust cover ×1 Dust cover hinge ×2 RCA stereo cable ×1
AC adaptor ×1
* For details, refer to the
included “Supplement”
(leaflet).
Owner’s Manual (this manual)
Supplement (leaflet)
Label area Outer edge
Before you start | Parts and their functions
10
En
Parts and their functions
Top panel
햲 33/45 (speed) ( page 19)
햳 PLAY/STOP (play/stop) ( page 19)
햴 Platter ( page 12)
햵 Platter sheet ( page 13)
햶 Center spindle ( page 12)
햷 Tone arm ( page 13)
햸 Head shell ( page 13)
햹 Cartridge
햺 Counter weight ( page 13)
햻 Counter ring ( page 17)
햽 Arm rest ( page 16)
햾 Lift lever ( page 20)
햿 Anti-skating ( page 18)
햻
햴 햶햳햲햵
햷
햸
햹
햺
햿
햽햾
Before you start | Parts and their functions
11
English
En
Back panel
햲 z (power)
This turns the unit’s power on/off. ( page 18)
햳 DC IN jack
Connect the AC adaptor (supplied) to this jack. ( page 15)
햴 PHONO OUT jacks
These jacks output the playback audio of the record. ( page 15)
햵 PHONO EQ (phono equalizer) switch
As appropriate for the device that is connected, set this to switch the
signal that is output from the PHONO OUT jacks. ( page 15)
햵햳햴 햲
: on : off
12
En
Getting ready
Location
Because record playback is easily affected by vibration, you should place the unit in a level location that is not subject to external vibration.
Place it sufficiently far from your speaker system so that it will not be affected by sound pressure or vibration.
Assembly
Assembling the unit
1
Lift up the platter.
2
Reaching through the round hole in the platter, pull the belt
outward, hooking it over your finger.
3
Insert the platter onto the center spindle.
CAUTION
Take care not to drop the platter. Dropping it might cause injury, or might
damage the unit.
1
2
33
Getting ready | Assembly
13
English
En
4
Align the round hole of the platter with the pulley.
5
Use your finger to hook the belt onto the pulley.
Take care that the belt is not twisted. After hooking the belt onto the
pulley, rotate the platter several times to ensure that the belt is smoothly
in place.
6
Place the platter sheet on the platter.
7
Attach the counter weight to the tone arm.
With the markings on the counter weight facing you, slide it onto the
back end of the tone arm.
8
Attach the head shell to the tone arm.
Insert the head shell into the front end of the tone arm, and turn the lock
nut to secure it.
Pulley
Lock nut
Getting ready | Assembly
14
En
Attaching the dust cover
The dust cover protects this unit from dust etc.
1
Insert the hinges into the appropriate locations at two sides of the
dust cover.
2
Attach the dust cover by inserting the hinges into the hinge bases
located on the back panel of the unit.
NOTE
To remove the dust cover, grasp the two sides of the dust cover and slowly
lift upward to remove the cover together with its hinges.
CAUTION
Take care not to pinch your hands or fingers when opening or closing the
dust cover
Hinge base
Getting ready | Making connections
15
English
En
Making connections
NOTE
Also refer to the owner’s manuals of the device that you are
connecting.
CAUTION
Finish making all other connections before you connect the AC adaptor (supplied) to
an AC outlet.
Connected devices
Devices not equipped with PHONO input jacks Devices equipped with PHONO input jacks
PHONO EQ switch
setting
ON (default) THRU
This unit’s equalizer
function
Enabled
The signal from the cartridge is amplified by the phono
equalizer that is built into this unit, and is output from
the PHONO OUT jacks.
Disabled
The signal from the cartridge is output directly from the
PHONO OUT jacks.
AUX IN
R L
Pre-main amplifier or component
(external input jacks)
AC adaptor
(supplied)
RCA stereo cable
(supplied)
Connect to
AC outlet
This unit
(back panel)
PHONO IN
R L
AC adaptor
(supplied)
RCA stereo cable
(supplied)
Pre-main amplifier
(PHONO input jacks)
This unit
(back panel)
Connect to
AC outlet
Getting ready | Making adjustments
16
En
Making adjustments
Adjusting the stylus pressure
Adjust the tone arm so that the appropriate stylus pressure is applied to the
record.
1
Detach the stylus cover.
NOTICE
Take care that the stylus cover or your finger do not contact the
stylus.
2
Set the anti-skating adjustment to the “0” position.
3
Release the tone arm lock.
4
Move the tone arm off of the arm rest and slightly to the left.
NOTICE
Take care that the needle does not contact any part of the unit.
Getting ready | Making adjustments
17
English
En
5
Turn the counter weight so that the tone arm is horizontal.
Toward 1: Counter weight moves forward on the tone arm.
Toward
2: Counter weight moves backward on the tone arm.
6
Return the tone arm to the arm rest, and lock it in place.
7
Turn the counter ring so that the “0” marking is aligned with the
center line on the back end of the tone arm.
NOTE
When turning the counter ring, use your fingers to press the counter
weight so that it does not rotate.
8
By turning the counter weight, set the counter weight markings to
the stylus pressure specified for the cartridge.
The specified stylus pressure for the supplied cartridge is 3.5 g.
NOTE
Turning the counter weight also turns the counter ring.
Correct
Tone arm is horizontal
(balanced)
Incorrect
Counter weight is too far
forward
Incorrect
Counter weight is too far
backward
1
2
Center line
Getting ready | Turning the power on
18
En
Adjusting the anti-skating
As the platter rotates, the tip of the stylus generates a force that pulls it toward
the center of rotation. If the anti-skating value is set to the same value as the
stylus pressure, a force is generated that pulls the tip of the stylus outward
away from the center of rotation, and the two forces cancel each other.
1
Turn the anti-skating adjustment to the same value as the stylus
pressure of the cartridge.
Turning the power on
On the back panel of the unit, press z (power) to turn on the power of the unit.
19
English
En
Playback
Starting playback
1
Open the dust cover, and place the record on the platter.
If you’re playing a 45 rpm record, use the supplied 45 rpm adaptor.
2
Press 33/45 (speed) to select the appropriate speed for the record.
3
Press PLAY/STOP (play/stop).
The platter rotates.
CAUTION
If you play back a record without sufficiently lowering the volume of your
amplifier, a loud sound might occur when the tip of the stylus contacts the
record. This can cause hearing loss and might damage your amplifier and
speaker, so be sure to lower the volume of your amplifier.
: 33 1/3 rpm : 45 rpm
Playback
20
En
4
Release the tone arm lock, and raise the lift lever.
5
Move the tone arm to the playback position of the record.
6
Lower the lift lever.
The tone arm is lowered, and playback starts.
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/