Samsung LE23R81B Руководство пользователя

Категория
ЖК-телевизоры
Тип
Руководство пользователя
BN68-01166L-01
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Связывайтесь с SAMSUNG по всему миру
Если у вас есть предложения или вопросы по продуктам Samsung,
связывайтесь с информационным центром Samsung.
ТЕЛЕВИЗОР С
ЖИДКОКРИСТАЛ
ЛИЧЕСКИМ
ЭКРАНОМ
Руководство пользователя
Перед началом эксплуатации устройства
внимательно прочитайте настоящее руководство и
сохраните его для будущего использования.
ЭКРАННЫЕ МЕНЮ
ДИСПЛЕЙ ПК
КАРТИНКА В КАРТИНКЕ (PIP)
ТЕЛЕТЕКСТ
Зарегистрируйте устройство по адресу: www.samsung.com/global/register
Запишите здесь название модели и серийный номер для будущих справок.
• Модель _______________ Серийный номер _______________
Country
RUSSIA
UKRAINE
Customer Care Center
8-800-200-0400
8-800-502-0000
Web Site
www.samsung.ru
www.samsung.com/ur
LE23R81B LE26R81B
LE23R81W LE26R81W
LE23R82B LE26R82B
LE23R83B LE26R83B
LE23R84B LE26R84B
BN68-01166L-01L02-Cover.indd 1 2007-03-08 �� 10:17:44
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light
emission on the screen. Playing a DVD or a game console may cause a similar effect to the
screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01166K-Eng-0307.indd 1 2007-03-07 �� 8:41:23
English - 1
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts .......................................................2
Installing the Stand ...........................................2
Installing the Wall Mount Kit ..............................2
Viewing the Control Panel .................................3
Viewing the Connection Panel ..........................4
Viewing the Remote Control .............................7
Installing Batteries in the Remote Control .........8
Switching On and Off ........................................8
Placing Your Television in Standby Mode .........8
Plug & Play .......................................................9
SETTING THE CHANNELS
Storing Channels Automatically ......................10
Storing Channels Manually .............................11
Setting the Channel Lists ................................12
Activating the Child Lock .................................12
Sorting the Stored Channels ...........................13
Assigning Channels Names ............................13
Fine Tuning Channel Reception ......................14
SETTING THE PICTURE
Changing the Picture Standard .......................14
Adjusting the Custom Picture ..........................15
Changing the Colour Tone ..............................15
Activating Backlight. ........................................16
Conguring Detailed Settings on the Picture ..17
Changing the Picture Size ..............................18
Freezing the Current Picture ...........................19
Selecting the Screen Mode .............................19
Resetting the Picture Settings to the
Factory Defaults ..............................................19
Digital NR / Active Colour / DNIe ....................20
Viewing the Picture In Picture (PIP) ................21
HDMI Black Level ...........................................22
SETTING THE SOUND
Changing the Sound Standard ........................22
Adjusting the Sound Settings ..........................23
Setting the TruSurround XT (SRS TS XT) ......23
Connecting Headphones ................................24
Selecting the Sound Mode ..............................24
Adjusting the Volume Automatically ................24
Selecting the Internal Mute .............................25
Listening to the Sound of the Sub Picture .......25
Resetting the Sound Settings to the Factory
Defaults ...........................................................26
SETTING THE TIME
Setting and Displaying the Current Time ........26
Setting the Sleep Timer ...................................27
Switching the Television On and Off
Automatically ...................................................27
FUNCTION DESCRIPTION
Choosing Your Language ................................28
Using Game Mode ..........................................28
Setting the Blue Screen Mode /
Selecting the Melody ......................................29
Setting the Home Theater PC .........................29
Setting the Light Effect.................................... 30
Using the Energy Saving Feature ...................30
Selecting the Source .......................................31
Editing the Input Source Names .....................31
USING THE TELETEXT FEATURE
Teletext Decoder .............................................32
Displaying the Teletext Information .................32
Selecting a Specic Teletext Page ..................33
Using Fastext to Select a Teletext Page .........33
SETTING THE PC
Setting up Your PC Software
(Based on Windows XP) .................................34
Display Modes ................................................34
Setting the PC .................................................35
RECOMMENDATIONS FOR USE
Using the Anti-Theft Kensington Lock .............36
Troubleshooting: Before Contacting
Service Personnel ...........................................36
Technical and Environmental Specications ..37
English - 1
Symbol Press Important Note One-Touch
Button
English
BN68-01166K-Eng-0307.indd 1 2007-03-07 �� 8:41:23
English - 2
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control
& Batteries
(AAA x 2)
Power Cord Cover-Bottom
Stand Screw
X 4
Stand Cleaning Cloth
< 2 >
< 3 >
1. Place the TV faced down on a soft cloth or cushion on a table.
2.
Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 37 inch and above.
Installing the Stand
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
Installing the Wall Mount Kit
Owner’s Instructions
Warranty card Safety Guide Registration Card
BN68-01166K-Eng-0307.indd 2 2007-03-07 �� 8:41:25
English - 3
Viewing the Control Panel
The product colour and shape may vary depending on the model.
Front Panel buttons
Touch the right side of
each button to operate.
1
SOURCE
Toggles between all the available input
sources (TV, Ext1, Ext2, AV, S-Video,
Component, PC, HDMI1, HDMI2,).
In the on-screen menu, use this button as
you would use the ENTER button on the
remote control.
2
MENU
Press to see an on-screen menu of your
TV’s features.
3
Press to increase or decrease the volume.
In the on-screen menu, use the
buttons as you would use the ◄ and
buttons on the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you would use the ▲ and
butons on the remote control.
5
(POWER)
Press to turn the TV on and off.
POWER INDICATOR
Blinks and turns off when the power is on
and lights up in stand-by mode.
6
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on
the TV.
7
SPEAKERS
1
2
3
4
5
6
7
[LE23R81B, LE26R81B, LE23R81W,
LE26R81W, LE23R83B, LE26R83B]
1
2
3
4
5,6
7
[LE23R82B, LE26R82B, LE23R84B, LE26R84B]
BN68-01166K-Eng-0307.indd 3 2007-03-07 �� 8:41:26
English - 4
Viewing the Connection Panel
Power Input
1 2 3 4
7
8
9
0
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting Set-Top Box, VCR or DVD
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
Connector
EXT 1
EXT 2
Video
O
O
Audio (L/R)
O
O
RGB
O
Output
Video + Audio (L/R)
Only TV
Output you can choose.
Input
5
6
BN68-01166K-Eng-0307.indd 4 2007-03-07 �� 8:41:26
English - 5
480i 480p 576i 576p 720p 1080i
HDMI/DVI 50Hz X X X O O O
HDMI/DVI 60Hz
X O X X O O
Component
O O O O O O
2 Connecting AUDIO
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theater.
3 HDMI IN 1, HDMI IN 2
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
- "High Definition Multimedia interface" allows the transmission of high definition digital video
data and multiple channels of digital audio (5. 1 channels).
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable
(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size,
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports
multi - channel digital audio.
DVI IN (HDMI 2) / (AUDIO R/L)
- When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console
etc, make sure that it has been set to a compatible video output mode as shown in the table
below. Failure to observe this may result in picture distortion, image breakup or no picture.
- When using an HDMI/DVI cable connection, it is only possible from the HDMI 2
terminal.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
"R- AUDIO - L" terminal on DVI for sound output.
Supported modes for HDMI/DVI and Component
4 Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
6 Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or
Camcorder.
- Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre
sponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (5) on the side of your set. While the
head phone is connected, the sound from the built-in speakers will be disabled.
7 Connecting Computer
- Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to
the Video Card of your computer.
- Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other
end to "Audio Out" of the sound card on your computer.
BN68-01166K-Eng-0307.indd 5 2007-03-07 �� 8:41:27
English - 6
8 SERVICE
- Service connection for qualified service engineer.
9 Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top
Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y")
on your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends
to corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
0 Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
BN68-01166K-Eng-0307.indd 6 2007-03-07 �� 8:41:27
English - 7
Viewing the Remote Control
1 Television Standby button
2
Number buttons for direct
channel access
3
One/Two-digit channel selection
4
Selects the TV mode directly
5 Used to display Channel Lists on
the screen.
6
Volume increase
Volume decrease
7 Temporary sound switch-off
8
Menu display and
change confirmation
9
Sound mode selection
0 Returns to the previous menu.
!
Picture effect selection
@ Adjusts screen brightness to
save energy.
#
Sound effect selection
$ SRS TSXT selection
% Available source selection
^ Previous channel
&
Selects the HDMI mode directly.
*
Automatic Power-off
(
P : Next channel
P : Previous channel
) Exit the OSD
a
Control the cursor in the menu
b
Use to see information on the
current broadcast
c Picture freeze
e
Picture size selection
f
PIP:Picture-In-Picture On / Off
SOURCE: Input source selection
POSITION: PIP position selection
P
: Next channel
P : Previous channel
Teletext Functions
4
Exit from the teletext display
8 Teletext index
% Teletext mode selection (LIST/FLOF)
^ Teletext sub page
(
P : Teletext next page
P : Teletext previous page
)
Teletext cancel
b Teletext reveal
d
Alternately select Teletext, Double, or Mix.
9!ce
Fastext topic selection
f
PIP:
Teletext Hold
f
SOURCE:
Teletext Store
f
POSITION:
Teletext
size selection
This is a special remote control for the visually impaired,
and has Braille points on the Power, Channel and Volume buttons.
BN68-01166K-Eng-0307.indd 7 2007-03-07 �� 8:41:27
English - 8
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the
button on the front of the set.
You also can press the POWER button or the TV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER
, numeric buttons (0~9), TV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday,
for example).
It is best to unplug the set from the mains and aerial.
Placing Your Television in Standby Mode
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Installing Batteries in the Remote Control
BN68-01166K-Eng-0307.indd 8 2007-03-07 �� 8:41:28
English - 9
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1. Press the POWER
button on the remote control.
The message "Start Plug & Play" is displayed with "OK"
selected.
2. Select the appropriate language by pressing the or ▼ but
tons.
Press the ENTER button to confirm your choice.
3.
Press the or buttons to select “Shop” or “Home”, then
the ENTER button.
We recommend setting the TV to Home mode for the best
picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MENU button for five seconds on the side
panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the or ▼ button.
Press the ENTER button to confirm your choice.
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER
button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER button at any time to interrupt the memorization process.
7. Press the ENTER
button.
Select the "Month", Year", "Day", Hour" or "Minute" by pressing the
or
buttons.
Set the "Month", Year", "Day", Hour" or "Minute" by pressing the
or
buttons.
You can also set the hour and minute by pressing the number buttons on the remote control.
8. Press the ENTER
button to confirm your setting.
Plug & Play
Language
: Select your language.
Country: Select your country.
Auto Store
: Automatically scans for and stores channels available in the local area.
Clock Set
: Sets the current time for the TV clock.
Plug & Play
Start Plug & Play.
Enter Exit
OK
BN68-01166K-Eng-0307.indd 9 2007-03-07 �� 8:41:28
English - 10
If you want to reset this feature...
1. Press the MENU
button to display the menu.
Press the
or
button to select "Setup", then press the
ENTER button.
2. Press the ENTER
button again, to select "Plug & Play".
3. The message to "Start Plug & Play" is displayed. (on page 9)
- Storing Channels Automatically
- Storing Channels Manually
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Plug & Play
Start Plug & Play.
Enter Return
OK
Move Enter Return
Move Enter Return
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the ENTER button.
2. Press the ENTER
button to select “Country”.
3. Select the appropriate country by pressing the or ▼ button.
Press the ENTER button to confirm your choice.
4. Press the
or
button to select “Auto Store”, then press the ENTER button.
5. Press the ENTER
button.
The TV will begin memorizing all of the available channels.
Press the ENTER button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
Storing Channels Automatically
BN68-01166K-Eng-0307.indd 10 2007-03-07 �� 8:41:29
English - 11
Storing Channels Manually
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU
button to display the menu.
Press the
or
button to select "Channel", then press the ENTER button.
2. Press the
or
button to select "Manual Store", then press the ENTER button.
3. Press the ENTER button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the
or
button and then press the ENTER button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the
or
button to select "Colour System", then press the ENTER button.
6. Select the colour standard required by pressing the
or
button then, press the ENTER button.
7. Press the
or
button to select "Sound System", then press the ENTER button.
8. Select the sound standard required by pressing the
or
button, then press the ENTER button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the
or
button to select "Channel".
Press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the
or
button. Press the
button to select channel.
Select the required number by pressing the
or
button and then press the ENTER button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the
or
button to select "Search".
Press the ENTER button. Search by pressing the
or
button and then press the ENTER button.
11. Press the
or
button to select "Store". Press the ENTER button to select "OK".
12. Repeat steps
3 to 11 for each channel to be stored.
BN68-01166K-Eng-0307.indd 11 2007-03-07 �� 8:41:30
English - 12
Set the channels according to your preference.
You can easily delete, add, or lock the channel you want.
1. Press the MENU
button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER button.
2. Press the
or
button to select "Channel Manager",
then press the ENTER button.
3. Press the ENTER button again, to select "Channel List".
4. Press the
button to select " " line.
5. Press the
or
button to select the undesired channel,
then press the ENTER button to cancel.
6. Repeat steps 5 for each channel to be selected or canceled
7. Press the EXIT
button to exit.
" " is active when "Child Lock" is selected to "On".
You can select these options by simply pressing the CH LIST
button on the remote control.
Setting the Channel Lists
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by muting
out video and audio.
Child Lock cannot be released using the buttons on the side.
Only the remote control can release the Child Lock setting,
so keep the remote control away from children.
1. Press the MENU
button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER button.
2. Press the
or
button to select "Channel Manager",
then press the ENTER button.
3. Press the
or
button to select "Child Lock", then press
the ENTER button.
4. Press the
or
button to select "On" or "Off". Press the
ENTER button.
5. Press the
or
button to select "Channel List",
then press the ENTER button.
6. Press the
button to select " " line.
7. Press the
or
button to select the channels you want to
lock, then press the ENTER button.
8. Repeat steps
7 for each channel to be locked or unlocked.
9. Press the EXIT button to exit.
Select "On" or "Off" in "Child Lock" to easily turn the channels
which selected on " " to be active or inactive.
Activating the Child Lock
TV
Channel Manager
Channel List
Child Lock :
Off
On
P 1 C3
Channel List
Move Enter
Page Return
Add Lock
1 / 10
Prog.
0 C--
1 C3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
P 2 C4 BBC1
Channel List
Move Enter
Page Return
Add Lock
1 / 10
Prog.
0 C--
1 C3
2 BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Move Enter Return
BN68-01166K-Eng-0307.indd 12 2007-03-07 �� 8:41:31
English - 13
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have
been automatically stored.
Give easily remembered numbers to the channels
that you watch most often.
1.
Press the MENU button to display the menu. Press the
or
button to select "Channel", then press the ENTER button.
2. Press the
or
button to select "Sort", then press the
ENTER button.
3. Select the channel number that you wish to change by press
ing the
or
button repeatedly. Press the ENTER button.
The selected channel number and name are moved to
right side.
4. Press the
or
button to move to the position in which you
would like to change and then press the ENTER button.
The selected channel is exchanged with the one
previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT
button to exit.
Sorting the Stored Channels
Assigning Channels Names
Sort
Prog. Ch. Name
0 C--
1 C23
2 C16
3 C3
4 S1
s
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1. Press the MENU
button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER button.
2. Press the
or
button to select "Name", then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new
name by pressing the
or
button. Press the ENTER
button.
The selection bar is displayed around the name box.
4.
The characters available are : Letters of the alphabet
(A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps
3 to 4 for each channel to be assigned to a new
name.
6. Press the EXIT
button to exit.
Name
Prog. Ch. Name
0 C--
---- - -
1 C23
---- - -
2 C16
---- - -
3 C3
---- - -
4 S1
---- - -
s
TV
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the
or
button
Press the
button
Press the
button
Press the ENTER button
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
TV
Move Enter Return
Move Enter Return
Move Enter Return
Move Enter Return
BN68-01166K-Eng-0307.indd 13 2007-03-07 �� 8:41:33
English - 14
Use fine tuning to manually adjust a particular channel for
optimal reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU
button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER button.
3. Press the
or
button to select "Fine Tune", then press
the ENTER button.
4. Press the
or
button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT
button to exit.
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the
or
button and then press the ENTER button.
Fine Tuning Channel Reception
Fine Tune
P 1
0
Reset
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the MENU
button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER
button again, to select "Mode".
3. Press the
or
button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT
button to exit.
Dynamic: Selects the picture for high-definition in a bright
room.
Standard: Selects the picture for optimum display in a
normal environment.
Movie: Selects the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each input
source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
Changing the Picture Standard
You can also press the
P.MODE button on the remote
control to select one of the
picture settings.
Picture
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
Picture
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
Dynamic
Standard
Movie
Move Enter Return
Adjust
Save
Return
Move Enter Return
Move Enter Return
BN68-01166K-Eng-0307.indd 14 2007-03-07 �� 8:41:35
English - 15
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint(NTSC only):
Adjusts the colour of objects, making them more red or green for a more natural look.
Your set has several settings which allow you to control
picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(on page 14)
2. Press the
or
button to select a particular item. Press the
ENTER button.
3. Press the
or
button to decrease or increase the value of
a particular item. Press the ENTER button.
4. Press the EXIT
button to exit.
Adjusting the Custom Picture
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
“Tint” function is available only in “HDMI” and “Component” mode.
Changing the Colour Tone
You can select the most comfortable colour tone to your eyes.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(on page 14)
2. Press the
or
button to select "Colour Tone", then press
the ENTER button.
3. Press the
or
button to select the desired colour tone
setting. Press the ENTERbutton.
4. Press the EXIT
button to exit
Cool2: Makes the colour temperature bluer than "Cool1"
menu.
Cool1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature redder than
"Warm1" menu.
The adjusted values are stored according to the selected
Picture mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
Picture
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
Picture
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
Picture
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
Cool 2
Cool 1
Normal
Warm 1
Warm 2
Move Enter Return
Move Enter Return
Move Enter Return
BN68-01166K-Eng-0307.indd 15 2007-03-07 �� 8:41:36
English - 16
Activating Backlight.
Picture
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
You can adjust the screen brightness by adjusting the LCD
backlight brightness. (0~10)
1. To select the desired picture effect, follow the “Changing the
Picture Standard” instructions number 1 to 3. (On page 14)
2. Press the ▲ or ▼ button to select “Backlight”, then press the
ENTER button.
3. Press the ◄ or ► button to decrease or increase the value of
a particular item.
Press the ENTER button.
4. Press the EXIT button to exit.
5
Backlight
Adjust Return
Move Enter Return
BN68-01166K-Eng-0307.indd 16 2007-03-07 �� 8:41:37
English - 17
You can set detailed picture settings.
1
Press the MENU button to display the menu.
2
Press the ENTER button, to select “Picture”.
3
Press the or button to select Detail Settings, then press
the ENTER button.
4 Select the required option by pressing the or ▼ button,
then press the ENTER
button.
Available options:
Black Adjust, Dynamic Contrast,
Gamma,Color Space, White Balance, My Colour Control,
Edge Enhancement
5
When you are satisfied with your setting, press the ENTER
button.
6
Press the EXIT button to exit.
When the picture mode is set to Movie or Standard,
Detailed
Settings can be selected.
If DNIe is Off, the Detailed Settings cannot be selected
when the Picture mode is in Standard mode.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust
the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ 3
You can adjust the middle brightness of pictures.
Press the or button until you reach the optimal setting.
Colour Space: Auto/Wide
You can set the color reproduction space for the input signal to Auto or Wide.
White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset
You can adjust the color temperature for more natural picture colors.
R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or button, then press the ENTER button.
Press the or button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
My colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or button, then press the ENTER button.
Press the or button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
Edge Enhancement: Off/On
You can emphasize object boundaries.
Conguring Detailed Settings on the Picture
Detailed Settings
Black Adjust : Off
Dynamic Contrast
: Off
Gamma : 0
Color Space
: Auto
White Balance :
My Colour Control
Edge Enhancement : Off
Picture
Detailed Settings :
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : On
Active Colour : Off
DNle : Off
Reset : Ok
More
TV
TV
Move Enter Return
Move Enter Return
BN68-01166K-Eng-0307.indd 17 2007-03-07 �� 8:41:38
English - 18
You can select the picture size which best corresponds to
your viewing requirements.
1. Press the MENU
button to display the menu.
Press the ENTER button, to select "Picture"
2. Press the
or
button to select "Size", then press the
ENTER button.
3. Select the required option by pressing the
or
button.
Press the ENTER button.
4. Press the EXIT
button to exit.
"Auto Wide" function is available only in "TV", "Ext1", "Ext2",
"AV", and "S-Video" mode.
In PC Mode, only "16:9" or "4:3" mode can be adjusted.
Zoom : Select by pressing the
or
buttons.
Use the
or
button to move the picture up and
down. After selecting , use the
or
button to
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the
or
buttons after selecting the by pressing the
or ENTER button.
Changing the Picture Size
You can select these options
by simply pressing the P.SIZE
button on the remote control.
Size
Auto Wide
16:9
Wide Zoom
Zoom
4:3
Just Scan
Picture
Detailed Settings
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
Reset : Ok
More
Auto Wide:
Automatically adjusts the picture size to the "16:9"
aspect ratio.
16:9:
Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Wide Zoom:
Magnify the size of the picture more than 4:3.
Zoom:
Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
4:3:
This is the default setting for a video movie or normal broadcasting.
Just Scan : Displays the input scenes as they are without any cutoff
when HDMI 720p,1080i signals are input.
TV
TV
Move Enter Return
Move Enter Return
BN68-01166K-Eng-0307.indd 18 2007-03-07 �� 8:41:39
1 / 1

Samsung LE23R81B Руководство пользователя

Категория
ЖК-телевизоры
Тип
Руководство пользователя

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

Спросите документ