Yamaha YPG-535 Инструкция по применению

Owner’s Manual

EN

Keyboard Stand Assembly

For information on assembling the

keyboard stand, refer to the instructions

on page 10 of this manual.

2 DGX-530/YPG-535 Owner’s Manual

PLEASE KEEP THIS MANUAL

This product utilizes batteries or an external power supply (adapter). DO

NOT connect this product to any power supply or adapter other than one

described in the manual, on the name plate, or speciﬁcally recom-

mended by Yamaha.

WARNING: Do not place this product in a position where anyone could

walk on, trip over, or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! If you must use

an extension cord, the minimum wire size for a 25’ cord (or less) is 18

AWG. NOTE: The smaller the AWG number, the larger the current han-

dling capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the

time of printing. However, Yamaha reserves the right to change or modify

any of the speciﬁcations without notice or obligation to update existing

units.

This product, either alone or in combination with an ampliﬁer and head-

phones or speaker/s, may be capable of producing sound levels that

could cause permanent hearing loss. DO NOT operate for long periods

of time at a high volume level or at a level that is uncomfortable. If you

experience any hearing loss or ringing in the ears, you should consult an

audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory mounting

ﬁxtures that are either supplied with the product or as optional accesso-

ries. Some of these items are designed to be dealer assembled or

installed. Please make sure that benches are stable and any optional ﬁx-

tures (where applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are not

covered by the manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and consult your dealer

before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and environ-

mentally friendly. We sincerely believe that our products and the produc-

tion methods used to produce them, meet these goals. In keeping with

both the letter and the spirit of the law, we want you to be aware of the

following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately ﬁve years. When replacement becomes necessary,

contact a qualiﬁed service representative to perform the replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, do not mix batteries with new, or with batteries

of a different type. Batteries MUST be installed correctly. Mismatches or

incorrect installation may result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all batter-

ies away from children. Dispose of used batteries promptly and as regu-

lated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some reason

its useful life is considered to be at an end, please observe all local,

state, and federal regulations that relate to the disposal of products that

contain lead, batteries, plastics, etc. If your dealer is unable to assist

you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model num-

ber, serial number, power requirements, etc., are located on this plate.

You should record the model number, serial number, and the date of pur-

chase in the spaces provided below and retain this manual as a perma-

nent record of your purchase.

Model

Serial No.

Purchase Date

SPECIAL MESSAGE SECTION

92-BP (bottom)

DGX-530/YPG-535 Owner’s Manual 3

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modiﬁcations not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line ﬁlter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact

Yamaha Corporation of America, Electronic Service Division, 6600

Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(class B)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den

ar ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspæendingen til dette apparat er IKKE afbrudt,

sålæenge netledningen siddr i en stikkontakt, som er t endt — også

selvom der or slukket på apparatets afbryder.

VAROITUS:

Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

(standby)

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif.

90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : DGX-530/YPG-535

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

(FCC DoC)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are coloured in accor-

dance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured makings identifying the terminals

in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the termi-

nal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the ter-

minal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal of

the three pin plug.

• This applies only to products distributed by

Yamaha-Kemble Music (U.K.) Ltd.

(2 wires)

4 DGX-530/YPG-535 Owner’s Manual

(3)-11 1/2

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

• Only use the voltage speciﬁed as correct for the instrument. The required

voltage is printed on the name plate of the instrument.

• Use the speciﬁed adaptor (PA-5D or an equivalent recommended by Yamaha)

only. Using the wrong adaptor can result in damage to the instrument or

overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• Do not place the AC adaptor cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy objects

on it, or place it in a position where anyone could walk on, trip over, or roll

anything over it.

• Do not open the instrument or attempt to disassemble the internal parts or

modify them in any way. The instrument contains no user-serviceable parts. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualiﬁed Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into

any openings. If any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet. Then have

the instrument inspected by qualiﬁed Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a ﬁre.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a

sudden loss of sound during use of the instrument, or if any unusual smells or

smoke should appear to be caused by it, immediately turn off the power switch,

disconnect the adaptor plug from the outlet, and have the instrument inspected

by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or

heat (such as in direct sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disﬁguration or damage to the internal

components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment,

mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected adaptor and other cables.

• When setting up the product, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn off

the power switch and disconnect the plug from the outlet. Even when the power

switch is turned off, electricity is still ﬂowing to the product at the minimum

level. When you are not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

• Use only the stand speciﬁed for the instrument. When attaching the stand or

rack, use the provided screws only. Failure to do so could cause damage to the

internal components or result in the instrument falling over.

• Do not place objects in front of the instrument’s air vent, since this may prevent

adequate ventilation of the internal components, and possibly result in the

instrument overheating.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor

Location

DGX-530/YPG-535 Owner’s Manual 5

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all

components, set all volume levels to minimum. Also, be sure to set the volumes

of all components at their minimum levels and gradually raise the volume

controls while playing the instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,

solvents, cleaning ﬂuids, or chemical-impregnated wiping cloths.

• Do not insert a ﬁnger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel

or keyboard. If this happens, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualiﬁed

Yamaha service personnel.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

Saving and backing up your data

The panel settings and some other types of data are not retained in memory when

you turn off the power to the instrument. Save data you want to keep to the

Registration Memory (page 87.)

Saved data may be lost due to malfunction or incorrect operation. Save important

data to a USB storage device/or other external device such as a computer. (pages

95, 106)

Backing up the USB storage device/external media

•To protect against data loss through media damage, we recommend that you

save your important data onto two USB storage devices/external media.

Always turn the power off when the instrument is not in use.

Even when the power switch is in the “STANDBY” position, electricity is still ﬂowing to the instrument at the minimum level. When you are not using the instrument for a long

time, make sure you unplug the AC power adaptor from the wall AC outlet.

● Trademarks

• The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.

•Windows is a registered trademark of Microsoft

®

Corporation in the United States and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Connections

Maintenance

Handling caution

Saving data

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the instrument, or data that is lost or destroyed.

The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your

instrument.

(3)-11 2/2

6 DGX-530/YPG-535 Owner’s Manual

The followings are the titles, credits and copyright notices for three (3) of the songs pre-installed in this

electronic keyboard:

Mona Lisa

from the Paramount Picture CAPTAIN CAREY, U.S.A.

Words and Music by Jay Livingston and Ray Evans

Composition Title : Against All Odds

Composer’s Name : Collins 0007403

Copyright Owner’s Name : EMI MUSIC PUBLISHING LTD

AND HIT & RUN MUSIC LTD

mance and broadcasting are strictly prohibited.

Can’t Help Falling In Love

from the Paramount Picture BLUE HAWAII

Words and Music by George David Weiss,

Hugo Peretti and Luigi Creatore

Worldwide Rights for Gladys Music Administered by Cherry Lane

Music Publishing Company, Inc.

GM System Level 1

“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible music

data can be accurately played by any GM-compatible tone generator, regardless of manufacturer. The GM

mark is afﬁxed to all software and hardware products that support GM System Level.

XGlite

As its name implies, “XGlite” is a simpliﬁed version of Yamaha’s high-quality XG tone generation format.

Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in mind that

some songs may play back differently compared to the original data, due to the reduced set of control

parameters and effects.

XF

The Yamaha XF format enhances the SMF (Standard MIDI File) standard with greater functionality and

open-ended expandability for the future. The instrument is capable of displaying lyrics when an XF ﬁle con-

taining lyric data is played.

STYLE FILE

The Style File Format is Yamaha’s original style ﬁle format which uses a unique conversion system to pro-

vide high-quality automatic accompaniment based on a wide range of chord types.

USB

USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with

peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the com-

puter is on).

Copyright Notice

Panel Logos

This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it

has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style ﬁles, MIDI

ﬁles, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use

is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE

ILLEGAL COPIES.

Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited

except for your personal use.

DGX-530/YPG-535 Owner’s Manual 7

Congratulations and thank you for purchasing

the Yamaha DGX-530/YPG-535 Portable Grand!

Please read this owner’s manual carefully before using the instrument

in order to take full advantage of its various features.

Make sure to keep this manual in a safe and handy place even after you ﬁnish reading,

and refer to it often when you need to better understand an operation or function.

The DGX-530/YPG-535 package includes the following items. Please check that you have them all.

• Music rest

• Accessory CD-ROM

• Owner’s manual (this book)

•Keyboard stand

•Footswitch

•AC Power Adaptor (PA-5D or an equivalent recommended by Yamaha)

*May not be included depending on your particular area. Please check with your Yamaha dealer.

Included Accessories

8 DGX-530/YPG-535 Owner’s Manual

Special Features of the DGX-530/YPG-535

Graded Soft Touch keyboard

Just as on an actual piano, the lower keys are heavy in touch and the higher keys are light, with soft

touch of digital keyboard for beginners.

■ Performance assistant technology Page 37

Play along with a song on the instrument’s keyboard and produce a perfect

performance every time ... even if you play wrong notes! All you have to do

is play on the keyboard—alternately on the left- and right-hand ranges of the

keyboard, for example—and you’ll sound like a pro as long as you play in

time with the music.

And if you can’t play with both hands, you can still play the melody simply

by tapping one key.

All you need is

one ﬁnger!

■ Play a Variety of Instrument Voices Page 17

With the DGX-530/YPG-535, the instrument voice that sounds when you

play the keyboard can be changed to violin, ﬂute, harp, or any of an extensive

range of voices. You can change the mood of a song written for piano, for

example, by using violin to play it instead. Experience a whole new world of

musical variety.

■ Play Along with Styles Page 26

Want to play with full accompaniment? Try the auto-accompaniment Styles.

The accompaniment styles provide the equivalent of a full backing band cov-

ering wide variety of styles from waltzes to 8-beat to euro-trance … and

much more. Select a style that matches the music you want to play, or exper-

iment with new styles to expand your musical horizons.

■ Easy Performance with Music Notation Display Page 35

When you play back a song, the corresponding score will be shown on the

display as the song plays. This is a great way to learn how to read music. If

the song contains lyric and chord data*, the lyrics and chords will also appear

on the score display.

* No lyrics or chords will appear on the display if the song you are using with the score display func-

tion does not contain the appropriate lyric and chord data.

DGX-530/YPG-535 Owner’s Manual 9

Copyright Notice....................................................................... 6

Panel Logos ............................................................................. 6

Included Accessories ............................................................... 7

Special Features of the DGX-530/YPG-535............................. 8

Setting Up 10

Keyboard Stand Assembly................................. 10

Power Requirements.............................................................. 12

Connecting Headphones (PHONES/OUTPUT Jack) ............. 12

Connecting a Footswitch (SUSTAIN Jack)............................. 12

Connecting to a Computer (USB Terminal)............................ 13

Turning the Power On ............................................................ 13

Panel Controls and Terminals 14

Front Panel............................................................................. 14

Rear Panel ............................................................................. 15

Quick Guide

Changing the Display Language 16

Try Playing a Variety of Instrument Voices 17

Select and Play a Voice—MAIN............................................. 17

Play Two Voices Simultaneously—DUAL .............................. 18

Play Different Voices with the Left and Right Hands—SPLIT 19

Play the Grand Piano Voice ................................................... 20

Fun Sounds 21

Drum Kits................................................................................ 21

Sound Effects ......................................................................... 21

The Metronome 22

Start the Metronome............................................................... 22

Adjusting the Metronome Tempo ........................................... 22

Setting the Number of Beats per Measure,

and the Length of Each Beat............................................. 23

Adjusting the Metronome Volume .......................................... 24

Playing Styles 25

Select a Style Rhythm ............................................................ 25

Play Along with a Style........................................................... 26

Playing Auto-accompaniment Chords .................................... 30

Using Songs 31

Select and Listen to a Song ................................................... 31

Song Fast Forward, Fast Reverse, and Pause ...................... 32

Change the Song Tempo ....................................................... 32

Play the Demo Song .............................................................. 33

Types of Songs ...................................................................... 34

Displaying the Song Score ..................................................... 35

Display the Lyrics ................................................................... 36

The Easy Way to Play Piano 37

CHORD Type—Play with Both Hands.................................... 38

CHORD/FREE Type—

Applying the Chord Type to the Left Hand Only................ 40

MELODY Type—Play with One Finger .................................. 42

CHORD/MELODY—

Chord Type with the Left Hand, Melody with the Right ..... 44

Select a Song For a Lesson 48

Lesson 1—Waiting ................................................................. 49

Lesson 2—Your Tempo ......................................................... 52

Lesson 3—Minus One............................................................ 53

Practice Makes Perfect—Repeat and Learn .......................... 54

Play Using the Music Database 55

Change a Song’s Style 56

Try Out the Easy Song Arranger ............................................ 56

Using the Easy Song Arranger............................................... 56

Record Your Own Performance 58

Track Configuration ................................................................ 58

Recording Procedure ............................................................. 59

Song Clear—Deleting User Songs......................................... 61

Track Clear—Deleting a Specified Track from a User Song .. 62

Backup and Initialization 63

Backup ................................................................................... 63

Initialization............................................................................. 63

Basic Operation 64

Basic Operation ......................................................................64

The Displays........................................................................... 66

MAIN Display Items ................................................................67

Reference

Play with a Variety of Effects 68

Adding Harmony..................................................................... 68

Adding Reverb........................................................................ 69

Adding Chorus........................................................................ 70

Panel Sustain .........................................................................71

Pitch Bend ..............................................................................71

Handy Performance Features 72

Tap Start................................................................................. 72

Touch Response Sensitivity ...................................................72

One Touch Setting..................................................................73

Select an EQ Setting for the Best Sound ...............................74

Pitch Controls .........................................................................75

Style (Auto-accompaniment) Functions 76

Pattern Variation (Sections)....................................................76

Setting the Split Point .............................................................79

Play a Style with Chords but No Rhythm

(Stop Accompaniment) ...................................................... 80

Adjusting the Style Volume.....................................................80

Chord Basics ..........................................................................81

Style File................................................................................. 83

Playing Styles Using the Entire Keyboard ..............................83

Looking Up Chords Using the Chord Dictionary..................... 84

Song Settings 85

Song Volume ..........................................................................85

A-B Repeat .............................................................................85

Muting Independent Song Parts .............................................86

Change the Melody Voice ......................................................86

Memorize Your Favorite Panel Settings 87

Saving to the Registration Memory ........................................87

Recalling a Registration Memory............................................88

The Functions 89

Selecting and Setting Functions .............................................89

Using USB Flash Memory 92

Connecting a USB Flash Memory ..........................................92

Formatting USB Flash Memory ..............................................94

Saving Data ............................................................................95

Convert a User Song to SMF Format and Save..................... 96

Loading User Files and Style Files .........................................97

Deleting Data from a USB Flash Memory ..............................98

Playing Data on a USB Flash Memory ...................................99

Connections 100

Connectors ...........................................................................100

Connecting a Personal Computer ........................................101

Transferring Performance Data to and from a Computer .....102

Remote Control of MIDI Devices ..........................................103

Initial Send............................................................................ 104

Transferring Data Between the Computer and Instrument... 104

Accessory CD-ROM Installation Guide 107

Important Notices about the CD-ROM..................................107

CD-ROM Contents ...............................................................108

System Requirements ..........................................................109

Software Installation .............................................................109

Appendix

Troubleshooting.................................................................... 114

Messages .............................................................................116

Scores ..................................................................................118

Voice List ..............................................................................124

Drum Kit List .........................................................................128

Style List ...............................................................................130

Music Database List .............................................................131

Songs Provided On the Supplied CD-ROM..........................132

Effect Type List..................................................................... 133

MIDI Implementation Chart...................................................134

MIDI Data Format .................................................................136

Specifications .......................................................................139

Index..................................................................................... 140

Contents

10 DGX-530/YPG-535 Owner’s Manual

Setting Up

The parts shown in the “Assembly Parts” illustration will be used. Follow the assembly instructions and select the

parts as needed.

z Attach the stand bases.

Making sure that the boards are facing the proper direc-

tion (the holes for the joint connectors should face inside).

The left and right side boards are the same shape. Insert the

joint connectors w into the holes as shown. The joint con-

nectors have been installed properly if you can see the

screw head on the connector.

Attach the stand bases to the bottom of the side boards,

using the 6 x 70 mm roundhead screws q. The left and

right stand bases are the same shape, and there is no differ-

ence between their front-to-back orientation. If you have

trouble screwing in the screws, use a screwdriver to rotate

the joint connectors to the appropriate position—the →

mark on the joint connectors indicates the location of the

screw hole.

Keyboard Stand Assembly

Have a phillips-head (+) screwdriver of the appropriate size ready.

Read these cautions carefully before you assemble or use the keyboard stand.

These cautions are to promote safe use of the stand and to prevent injury and damage from

occurring to you and others. By following these cautions carefully, your keyboard stand will pro-

vide you with safe and prolonged use.

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in

accordance with the sequence given below.

• Assembly should be carried out by at least two persons.

• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage.

• Use the stand after assembly is complete. An uncompleted stand may overturn or the keyboard may drop.

•Always place the stand on a ﬂat, stable surface. Placing the stand on uneven surfaces may cause it to

become unstable or overturn, the keyboard to drop, or injury.

• Do not use the stand for anything other than its designed purpose. Placing other objects on the stand

may result in the object dropping or the stand overturning.

• Do not apply excessive force to the keyboard as it may cause the stand to overturn or the keyboard to

drop.

• Make sure the stand is sturdy and safe, and all screws have been tight and ﬁrm before use. If not, the

stand may overturn, the keyboard may drop, or may result in injury to the user.

•To disassemble, reverse the assembly sequence given below.

CAUTION

q 6 x 70 mm roundhead

screws (4 pcs.)

Side

boards

Stand

bases

Back board

w Joint connectors (4 pcs.)

e 6 x 30 mm roundhead

screws (4 pcs.)

r 5 x 16 mm roundhead

screws (4 pcs.)

Assembly Parts

1

w Joint connectors

q 6 x 70 mm

roundhead screws

DGX-530/YPG-535 Owner’s Manual 11

Setting Up

x Attach the back board.

Attach the back board, using the 6 x 30 mm roundhead

screws e.

c Put the keyboard on the stand.

Check the back-to-front orientation for stand, and care-

fully place the keyboard on the side boards. Slowly move

the keyboard so that the holes on the bottom of the key-

board are properly aligned with the holes on the angle

brackets.

v Install the keyboard to the stand.

Fix the keyboard to the angle brackets, using the 5 x 16

mm roundhead screws r.

2

e 6 x 30 mm roundhead screw

3–4

r 5 x 16 mm

roundhead

screws

■ Post-assembly checklist

Once you’ve assembled the stand, check the fol-

lowing points:

• Are there any parts left over?

➔ If so, read the assembly instructions again and correct

any errors you might have made.

• Is the instrument clear of doors and other movable

ﬁxtures?

➔ If not, move the instrument to an appropriate location.

• Does the instrument make a rattling noise when you

play it or move it?

➔ If so, properly tighten all screws.

• Also, if the keyboard makes a creaking noise or

seems unsteady when you play it, refer carefully to

the assembly instructions and diagrams and

retighten all screws.

• Be careful not to drop the back board or touch the sharp metal ﬁt-

tings.

CAUTION

• Be careful not to drop the keyboard or to get your ﬁngers caught

between the keyboard and the stand parts.

CAUTION

12 DGX-530/YPG-535 Owner’s Manual

Setting Up

Be sure to do the following operations BEFORE turning on the power.

 Make sure that the [STANDBY/ON] switch of the

instrument is set to STANDBY.

 Connect the AC adaptor to the power supply jack.

 Plug the AC adaptor into an AC outlet.

Make all necessary connections below BEFORE turning the power on.

The instrument speakers are automatically shut off

when a plug is inserted into this jack. The PHONES/

OUTPUT jack also functions as an external output. You

can connect the PHONES/OUTPUT jack to a keyboard

ampliﬁer, stereo system, mixer, tape recorder, or other

line-level audio device to send the instrument’s output

signal to that device.

The sustain function lets you produce a natural sustain

as you play by pressing a footswitch. Plug the Yamaha

FC5 footswitch into this jack and use it to switch sustain

on and off.

Power Requirements

• Use the speciﬁed adaptor (PA-5D or an equivalent recom-

mended by Yamaha) only. The use of other adaptors may

result in irreparable damage to both the adaptor and the

instrument.

WARNING

• Unplug the AC Power Adaptor when not using the instrument,

or during electrical storms.

CAUTION

AC power

adaptor

AC outlet





Connecting Headphones (PHONES/OUTPUT Jack)

•Avoid listening with the headphones at high volume for long peri-

ods of time; doing so may not only result in ear fatigue, it may be

damaging to your hearing.

WARNING

•To prevent damage to the speakers, set the volume of the external

devices at the minimum setting before connecting them. Failure to

observe these cautions may result in electric shock or equipment

damage. Also, be sure to set the volumes of all devices at their

minimum levels and gradually raise the volume controls while

playing the instrument to set the desired listening level.

CAUTION

Connecting a Footswitch (SUSTAIN Jack)

• Make sure that the footswitch plug is properly connected to the SUS-

TAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing this

changes the recognized polarity of the footswitch, resulting in reversed

footswitch operation.

NOTE

DGX-530/YPG-535 Owner’s Manual 13

Setting Up

Connect the instrument’s USB terminal to the USB ter-

minal of a computer, and you can transfer performance

data and song ﬁles between the two (page 101). To use

the USB data-transfer features you’ll need to do the fol-

lowing:

• First, make sure the POWER switch on the instru-

ment is set to OFF, then use an AB type USB cable

to connect the instrument to the computer. After

making the connections, turn the instrument’s

power on.

• Install the USB-MIDI driver on your computer.

Installation of the USB-MIDI driver is described on

page 109.

Turn down the volume by turning the [MASTER VOL-

UME] control to the left and press the [STANDBY/ON]

switch to turn on the power. Press the [STANDBY/ON]

switch again to turn the power OFF.

Backup data in the ﬂash memory is loaded to the instru-

ment when the power is turned on. If no backup data

exists on ﬂash memory, all instrument settings are

restored to the initial factory defaults when the power is

turned on.

Connecting to a Computer (USB Terminal)

Turning the Power On

• Even when the switch is in the “STANDBY” position, electricity is

still ﬂowing to the instrument at the minimum level. When you are

not using the instrument for a long time, make sure you unplug the

AC power adaptor from the wall AC outlet.

CAUTION

•Never attempt to turn the power off when a “WRITING!” message

is shown in the display. Doing so can damage the ﬂash memory

and result in a loss of data.

CAUTION

● Music Rest

Insert the music rest into

the slots as shown.

14 DGX-530/YPG-535 Owner’s Manual

Panel Controls and Terminals

q [STANDBY/ON] switch .................... page 13

w [MASTER VOLUME] control.... pages 13, 64

e FILE CONTROL [MENU],

[EXECUTE] buttons................. pages 92–98

r [LYRICS] button ............................... page 36

t [SCORE] button............................... page 35

y [CHORD FINGERING] button ......... page 83

u [P.A.T. ON/OFF] button.................... page 38

i [MUSIC DATABASE] button ............ page 55

o [FUNCTION] button ................. pages 66, 89

!0 LESSON [L], [R],

[START] buttons .............................. page 49

!1 [METRONOME ON/OFF] button ..... page 22

!2 [TEMPO/TAP] button ............... pages 32, 72

!3 SONG MEMORY

[REC], [1]–[5], [A] buttons............... page 59

!4 [REPEAT & LEARN]/

[ACMP ON/OFF] button........... pages 54, 26

!5 [A-B REPEAT]/

[INTRO/ENDING/rit.] button .... pages 85, 76

!6 [REW]/

[MAIN/AUTO FILL] button ....... pages 32, 76

!7 [FF]/[SYNC STOP] button ....... pages 32, 78

!8 [PAUSE]/

[SYNC START] button ............. pages 32, 77

!9 [START/STOP] button ....... pages 25, 32, 65

@0 [SONG] button................................. page 31

@1 [EASY SONG

ARRANGER] button........................ page 56

@2 [STYLE] button................................ page 25

@3 [VOICE] button ................................ page 17

@4 Dial ............................................pages 65, 89

@5 CATEGORY [ ] and [ ]

buttons......................................pages 65, 89

@6 Number buttons [0]–[9],

[+] and [-] buttons ....................pages 65, 89

@7 [DEMO] button................................. page 33

@8 [EXIT] button ................................... page 66

@9 REGIST MEMORY

[MEMORY/BANK], [1], [2] buttons.. page 87

#0 [PORTABLE GRAND] button.......... page 20

#1 [SPLIT ON/OFF] button................... page 19

#2 [DUAL ON/OFF] button ................... page 18

#3 [HARMONY ON/OFF] button .......... page 68

#4 [PITCH BEND] wheel....................... page 71

#5 Drum Kit........................................... page 21

The illustrations next to each key indicate the

drum and percussion instruments assigned to the

keys when “Standard Kit 1” is selected.

q

w

e

r t

y

u

!1 !2

io

!4 !5 !6 !7 !8 !9

!0

!3

Song Category List

(page 33)

Style Category List

(page 130)

Front Panel

f

r

DGX-530/YPG-535 Owner’s Manual 15

Panel Controls and Terminals

#6 CONTRAST knob............................. page 67

#7 USB TO DEVICE terminal................ page 93

USB TO HOST terminal ........... page 13, 100

#8 SUSTAIN jack................................... page 12

#9 PHONES/OUTPUT jack ................... page 12

$0 DC IN 12V jack................................. page 12

@0

@1

@2

@3

@8

@9

@5

#0 #1 #2 #3

@4

@6

@7

#6 #7 #8 #9 $0

#4

#5

Rear Panel

Music Database List

(page 131)

Voice Category List

(page 124)

Display

(pages 66, 67)

Rear Panel

16 DGX-530/YPG-535 Owner’s Manual

Q

u

i

c

k

G

u

i

d

e

Changing the Display Language

This instrument allows you to select English or Japanese as the display

language. The default display language is English, but if you switch to

Japanese the lyrics, ﬁle names, demo display, and some messages will be

displayed in Japanese where appropriate.

1

Press the [FUNCTION] button.

2

Press the CATEGORY [ ] and [ ] buttons a number of

times until the “Language” item appears.

The currently selected display language will appear below the “Lan-

guage” item.

When highlighted you can use the [+] and [-] buttons to select the lan-

guage as required.

3

Select a display language.

The [+] button selects English and the [-] button selects Japanese.

The language selection will be stored in the internal ﬂash memory so

that it is retained even when the power is turned off.

4

Press the [EXIT] button to return to the MAIN display.

f

r

Language item

The currently selected

language

Quick Guide

DGX-530/YPG-535 Owner’s Manual 17

Q

u

i

c

k

G

u

i

d

e

Try Playing a Variety of Instrument Voices

In addition to piano, organ, and other “standard” keyboard instruments,

this instrument has a large range of voices that includes guitar, bass,

strings, sax, trumpet, drums and percussion, sound effects … a wide vari-

ety of musical sounds.

This procedure selects the main voice you will play on the keyboard.

1

Press the [VOICE] button.

The main voice selection display will appear.

The currently selected voice number and name will be highlighted.

2

Select the voice you want to play.

While watching the highlighted voice name rotate the dial. The avail-

able voices will be selected and displayed in sequence. The voice

selected here becomes the main voice.

For this example select the “102 Flute” voice.

3

Play the keyboard.

Try selecting and playing a variety of voices.

Press the [EXIT] button to return to the MAIN display.

Select and Play a Voice—MAIN

The currently

selected voice num-

ber and name

Select 102 Flute

Adjusts volume.

Try Playing a Variety of Instrument Voices

18 DGX-530/YPG-535 Owner’s Manual

You can select a second voice which will play in addition to the main voice when you play the keyboard.

The second voice is known as the “dual” voice.

1

Press the [DUAL ON/OFF] button.

The [DUAL ON/OFF] button turns the dual voice on or off.

When turned on the dual voice “DUAL” will appear in the MAIN dis-

play. The currently selected dual voice will sound in addition to the

main voice when you play the keyboard.

2

Press and hold the [DUAL ON/OFF] button for longer than

a second.

The dual voice selection display will appear.

3

Select the desired dual voice.

Watch the displayed dual voice and rotate the dial until the voice you

want to use is selected. The voice selected here becomes the dual voice.

For this example try selecting the “120 Vibraphone” voice.

Play Two Voices Simultaneously—DUAL

Voice Number

The currently selected dual voice

Dual voice selection display

Hold for longer than a second

Try Playing a Variety of Instrument Voices

DGX-530/YPG-535 Owner’s Manual 19

4

Play the keyboard.

Try selecting and playing a range of dual voices.

Press the [EXIT] button to return to the MAIN display.

In the split mode you can play different voices to the left and right of the keyboard “split point”. The main

and dual voices can be played to the right of the split point, while the voice played to the left of the split

point is known as the “split voice”. The split point setting can be changed as required (page 79).

1

Press the [SPLIT ON/OFF] button.

The [SPLIT ON/OFF] button turns the split voice on or off. When

turned on the split voice “SPLIT” will appear in the MAIN display. The

currently selected split voice will sound to the left of the keyboard split

point.

2

Press and hold the [SPLIT ON/OFF] button for longer than

a second.

The split voice selection display will appear.

Two voices will sound at the same time.

Play Different Voices with the Left and Right Hands—SPLIT

Main voice and dual voiceSplit voice

Split point

Voice Number

The currently selected split

voice

Split voice selection display

Hold for longer than a second

Try Playing a Variety of Instrument Voices

20 DGX-530/YPG-535 Owner’s Manual

3

Select the desired split voice.

Watch the highlighted split voice and rotate the dial until the voice you

want to use is selected. The voice selected here becomes the split voice

which will play to the left of the keyboard split point. For this example

try selecting the “038 Folk Guitar” voice.

4

Play the keyboard.

Try selecting and playing a range of split voices.

Press the [EXIT] button to return to the MAIN display.

When you just want to play piano, all you have to do is press one convenient button.

Press the [PORTABLE GRAND] button.

The “001 Grand Piano” voice will be selected.

Play the Grand Piano Voice

• When you press the [PORTA-

BLE GRAND] button all settings

other than touch sensitivity are

turned off. The dual and split

voices will also be turned off, so

only the Grand Piano voice will

play over the entire keyboard.

NOTE

Страница загружается...

Yamaha YPG-535, DGX-530 Инструкция по применению

Похожие модели бренда

Модели других брендов