Yamaha YRS-1500 Справочное руководство

Бренд: Yamaha

Модель: YRS-1500

Тип: Справочное руководство

Это руководство также подходит для

YRS-2500

Yamaha YRS-1500 поможет создать объемный звук в любом помещении. Технология отражения звуковых лучей от стен и потолков создает эффект присутствия. Для настройки и управления используются кнопки на корпусе или пульт дистанционного управления. Подключите акустическую систему к телевизору и проигрывателю, чтобы наслаждаться фильмами и музыкой с качественным объемным звуком. Встроенный Bluetooth-модуль позволяет подключать смартфоны и планшеты для воспроизведения музыки и управления плейлистами.

This Quick Reference Guide provides instructions for connecting a TV and BD/DVD player to this unit, applying settings, and playing

content. For more information on operations, refer to the Owner’s Manual.

Read the safety instructions on page 2 in the Owner’s Manual before using this unit. For instructions on how to operate or set the

external devices, refer to the owner’s manual supplied with each device.

In this manual, the YRS-1500 is used for illustrative purposes.

Surround sound TV stand

Quick Reference Guide

English

Supplied accessories

Before connecting, make sure you have received all of the following items.

YRS-2500 YRS-1500

The rack must be

assembled before it

can be used. Refer to

the Install Manual for

a list of parts and

assembly

instructions.

Remote control Batteries

(AAA, R03, UM-4) (x2)

Optical cable (1.5 m) IntelliBeam microphone

(6 m)

Cardboard

microphone stand

Owner’s Manual Quick Reference Guide (this booklet) Install Manual

Devices and cables required for connection

The following items are not supplied with this unit.

TV BD/DVD player HDMI cables (x2)

Installation Connection Settings Playback

Installation

YRS-2500

YRS-1500

This unit creates surround effects by

reflecting sound beams off the walls of your

listening room. The arrows in the diagrams

on the right indicate the images of paths of

5-channel sound beams. To achieve desired

surround sound effects, install this unit

where there are no objects such as furniture

obstructing the path of sound beams.

Parallel installation Corner installation

Objects,

such as

furniture

Objects, such as furniture

40° to 50°

1 Front left channel 2 Center channel 3 Front right channel

4 Surround left channel 5 Surround right channel

Install the unit in the center of

the left and right walls.

• The listening position (such as

sofa, etc.) should be located

at the front of the unit.

• The distance between the

listening position and the unit

should be more than 1.8 m.

Example for installing the unit in living room

• As sound beams normally pass through tables, tables are

not obstacles. And a cupboard installed facing the wall

reflects sounds.

• In a case of the listening room as shown in the illustration

on the right, adjusting the position of the right channel after

AUTO SETUP (as shown in “Carrying out AUTO SETUP for

appropriate surround effects” in this Quick Reference

Guide) enables to achieve more desired surround sound

effects. See page 48 in Owner's Manual.

• As the curtains absorb sounds, the sound features of the

listening room is different from the case with the curtain

opened and the case with the curtain closed. Using saving

settings function enables to save the best settings for each

case of listening room. See page 40 in Owner's Manual.

Objects, such as

furniture

Installation Connection Settings Playback

Connection

When external devices such as a TV, BD/DVD player, and/or game console are connected, audio and video signals are transmitted as

shown below.

• Do not connect the power cable until all connections are completed.

• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.

■ Handling cables

■ Connecting a TV and BD/DVD player

For the cable connection, follow the procedure below. See page 19 in the Owner’s Manual when connecting other playback devices

such as a game console.

■ Preparing remote control

Audio connection Video connection Audio and video

connection

This unit: Plays audio from TV broadcasts, BD/DVD discs, etc.

BD/DVD player

Satellite and cable TV tuner

(not HDMI-compatible)

TV: Plays video from TV

broadcasts, BD/DVD player, etc.

Game console

(HDMI-compatible)

HDMI cableHDMI cable

Optical cable

Video cable

HDMI cable

Optical cable

Use to connect a TV that does not

support audio return channel (ARC) to

this unit.

Audio from TV broadcast

(TVs that support Audio

Return Channel (ARC))

When placing playback devices on the rack,

remove the center rear panel and connect the

playback devices. Run cables through the

indented portion of the rack, and reattach the

center rear panel after all devices are connected.

If longer cables are used, excess portions can be

stored in the space between the center rear panel

and this unit.

Center rear panel

AUX1

AUX2 TV OPTICAL

OUT (ARC)

IN1 IN2 IN3

HDMI

AUX1

AUX2 TV OPTICAL

OUT (ARC) IN1 IN2 IN3

HDMI

HDMI INPUT

OPTICAL

OUTPUT

123

HDMI

OUTPUT

BD/DVD player

1. Remove the cap

2. Check the direction of

the plug

Video signals

Audio signals

To an AC wall

outlet

HDMI cable (optional)

Input the digital audio/video signals from the BD/DVD player

to this unit.

HDMI cable (optional)

Digital video from the BD/DVD player is displayed on the TV.

To an AC wall outlet

Audio Return Channel (ARC) supported TV

• Connect an HDMI cable to the audio return channel supported

jack (the jack with “ARC” indicated) on TV.

• Activate the HDMI control function of this unit so as to activate

the Audio Return Channel (ARC). See page 29 in the Owner’s

Manual.

What is Audio Return Channel (ARC)?

A function transmits digital audio signal output from TV to this unit

through an HDMI cable. By this function, an optical cable to

connect TV and this unit is not needed.

yTips

Use an optical cable when

connecting a TV that does not

support Audio Return Channel.

Installing the batteries

Battery × 2 (supplied)

(AAA, R03, UM-4)

Press down on

the arrow and

slide the cover in

the direction in

which it points.

Slide the cover back to close it.

Within 6 m

Operation range

Installation Connection Settings Playback

Carrying out AUTO SETUP for appropriate surround effects

The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the

AUTO SETUP procedure is in progress.

Place the IntelliBeam microphone at your normal listening position.

Assemble the cardboard microphone stand and place the IntelliBeam microphone on top of it horizontally as shown below.

Use the supplied cardboard microphone stand to place the IntelliBeam microphone at the same height as your ears would be when

you are seated.

Make sure that there are no obstacles between the IntelliBeam microphone and the walls in your listening room as these objects

obstruct the path of sound beams.

Connect the IntelliBeam microphone to the INTELLIBEAM MIC jack on the rear of the unit.

Make sure that your listening room is as quiet as possible.

For accurate measurement, turn off air conditioner or other devices that make noises.

Follow the instructions below and then leave the room. If you remain in the room, you may obstruct the beam, or the microphone may

pick up any sounds you make, possibly resulting in improper configuration of settings.

When leaving the room, bring this Quick Reference Guide with you. The AUTO SETUP procedure takes about 3 minutes. Wait outside

the room during the AUTO SETUP procedure.

To cancel the AUTO SETUP procedure after it is started, press the RETURN ( ) key on the remote control.

Press the ENTER key to start the AUTO

SETUP procedure and then leave the room

within 10 seconds.

The screen automatically changes during the AUTO

SETUP procedure.

If the AUTO SETUP procedure is complete, this unit

rings the chimes and the results will be displayed on the

TV.

• The results displayed depend on the position of the

unit.

• If you hear a buzzer sound and an error message

appears on the TV, look for a solution in “If an error

message is displayed” on page 28 in the Owner’s

Manual.

Press the ENTER key.

The measurement results are applied and saved in the

unit.

• You can save several measurement results by

pressing the SYSTEM MEMORY 1, 2, or 3 key. See

page 40 in the Owner’s Manual.

When the SYSTEM MEMORY 1 key is pressed, “M1

Saving” is displayed, and settings are saved.

• If ambient noise is picked up after measurement

begins, an error message is displayed in the “AUTO

SETUP COMPLETE” screen prompting you to begin

measurement again. Press the ENTER key to begin

measurement again.

Remove the IntelliBeam microphone.

The IntelliBeam microphone is sensitive to heat, so

should not be placed anywhere where it could be

exposed to direct sunlight or high temperatures (such as

on top of AV equipment).

Press the z key to turn on this unit.

Turn the TV on and switch the TV’s input

to display video content from this unit.

When this unit is connected to the HDMI input on the

TV (as shown in “Connecting a TV and BD/DVD

player” in this Quick Reference Guide), switch the TV’s

input to “HDMI1”.

You can select the language for the menu display.

Press and hold the SETUP ( ) key until the “OSD

LANGUAGE” menu appears. Press the S/T key to

select the desired language. Press the SETUP ( ) key

again to exit the setup menu.

12345

Remove

Fit in

Place horizontally

Run

through

IntelliBeam microphone Upper limit

Center height of

this unit

Within 1 m

Listening

position

Cardboard

microphone stand

1.8 m or more

Lower limit

Center line

IntelliBeam microphone

Cardboard microphone stand

Glows green

yTip

AUTO SETUP

(PREPARATION & CHECK)

Please connect the MIC.

Please place the MIC at least

1.8m/6ft away from Sound Pro-

jector. The MIC should be set

at ear level when seated.

Measurement takes about 3min.

After [ENTER] is pressed,

please leave the room.

[ENTER]:Start [RETURN]:Cancel

IntelliBeam microphone (supplied)

Cardboard microphone

stand (supplied)

Note

AUTO SETUP START

Will begin in 10 sec.

Please leave the room.

----------

[RETURN]:Cancel

(After 3 min.)

SHOW RESULT

MEASUREMENT COMPLETE.

[ENTER]:Save set-up.

[RETURN]:Do not save set-up.

ENVIRONMENT CHECK:Success

BEAM MODE:5Beam/Plus2

yTips

AUTO SETUP COMPLETE

Please remove the MIC

from Sound Projector

and the listening position.

Press [SYSTEM MEMORY] key

to save set-up in the memory.

Installation Connection Settings Playback

Playing back

Confirm that this unit and other devices are properly connected by playing a DVD or BD on the BD/DVD player. The following explains

the playback procedure when this unit, TV, and BD/DVD player are connected as shown in “Connecting a TV and BD/DVD player” in

this Quick Reference Guide.

■ Enjoying TV

Press the z key to turn on this unit.

Turn on your TV and BD/DVD player connected to this unit.

Press the HDMI1 key to select the BD/DVD player as the input

source.

Switch the TV’s input to HDMI 1.

Play back a DVD or BD on the BD/DVD player.

Press the VOL (+/-) key to adjust the volume.

Press the CINEMA DSP keys to set your sound preferences.

See page 32 in the Owner’s Manual.

When this unit does not play back, check the following

• The connection between this unit and BD/DVD player.

• The audio output settings of the BD/DVD player is set to digital sound output

(bitstream).

• The TV’s input is switched to this unit.

HDMI1

Input source name

yTips

Select the desired TV channel.

Press the TV key.

• When audio is output from the TV speaker, set TV’s audio

output to any option other than TV. See the instructions

manual of TV for more information.

• HDMI control function

You can use the TV remote control to operate this unit if your

TV supports the HDMI control function. See page 29 in the

Owner’s Manual.

yTips

■ Listening to the sound from a Bluetooth device

You can listen to the wireless sound from a Bluetooth device, such as a smartphone or digital music player.

See also the instructions manual of the Bluetooth device for more information.

■ HOME THEATER CONTROLLER app for smartphones and tablets

For detailed operation, refer to the Owner’s Manual.

Press the key on the remote control.

“Bluetooth” is selected as the input.

Turn on the Bluetooth device to be paired, and perform pairing.

The operation varies depending on the device. Refer to the operation manual of the device.

• Perform pairing with the Bluetooth device and unit within 10 m of each other.

• Pairing is required for connecting a Bluetooth device for the first time.

Select “YRS-2500 Yamaha” or

“YRS-1500 Yamaha” in the Bluetooth

device list on the device.

If a passkey (PIN) is required, enter the number

“0000”.

When pairing is completed, or a completion

message appears on the Bluetooth device.

Play back a song on the Bluetooth device.

“BLUETOOTH”, or the name of the connected device,

is displayed in the front panel display. “_” is displayed

for non-alphanumeric characters in the device name.

BLUETOOTH

yTips

YRS-1500

Yamaha

PIN 0 0 0 0

123

456

7 8 9

HOME THEATER CONTROLLER, a dedicated control app for Yamaha Home Theater components, enables basic operation of this unit,

including the ability to turn it off, switch between input sources, adjust volume, and select a sound program, using a smartphone or

tablet.

• The following devices support this app.

- iPod touch (4th generation or later) running iOS 5.1.1 or later

- iPhone 3GS or later devices running iOS 5.1.1 or later

- iPad running iOS 5.1.1 or later

- Android (version 2.3.3 or later) devices

• This app uses Bluetooth wireless communication.

• Search “HOME THEATER CONTROLLER” on Apple’s App Store or Google Play’s website to download the app or obtain the latest

information on the app.

• Android is a trademark of Google Inc.

• iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

Yamaha YRS-1500 Справочное руководство

Бренд: Yamaha

Модель: YRS-1500

Тип: Справочное руководство

Это руководство также подходит для

YRS-2500

Скачать PDF

сообщить о нарушении

на других языках

English: Yamaha YRS-1500 Reference guide

Yamaha YRS-1500 Справочное руководство

Это руководство также подходит для

Yamaha YRS-1500 Справочное руководство

на других языках

Похожие модели бренда