Sony 320GB (CECH-2508B) + Move Starter Pack Руководство пользователя

CECH-2508B 4-209-278-21(1) GB

4-209-278-21(1)

CECH-2508B

Instruction Manual

Руководство по эксплуатации

Before using this product, carefully read all product documentation and retain it for future reference.

Перед использованием продукта внимательно прочтите документацию и сохраните ее для дальнейшего использования.

2

CECH-2508B 4-209-278-21(1) GB

WARNING

To avoid electrical shock, do not open the cabinet. Refer

servicing to qualified personnel only.

Caution

Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

The use of optical instruments with this product will

increase eye hazard.

CLASS 1 LASER PRODUCT

LASER KLASSE 1 PRODUKT

This appliance is classified as a CLASS 1 LASER product under

IEC60825-1:2007.

The manufacturer of this product is Sony Computer Entertainment Inc., 2-6-21

Minami-Aoyama, Minato-ku Tokyo, 107-0062 Japan.

Distributed by Sony Computer Entertainment Europe Ltd, 10 Great Marlborough

Street, London, W1F 7LP.

Seizures induced by light stimulation (Photosensitive

Epilepsy)

If you have an epileptic condition or have had seizures, consult your doctor prior

to playing. Some individuals may experience eye soreness, altered vision,

migraine, muscle twitching, convulsion, blackout, loss of awareness or

disorientation when exposed to flashing or flickering lights or other light

stimulation on a television screen or while playing video games. If you experience

any of the above symptoms while playing, discontinue use immediately and

consult your doctor.

Stop playing immediately when you experience the following symptoms

In addition to the above symptoms, whilst playing if you have a headache,

dizziness, nausea, fatigue, similar symptoms to motion sickness, or if you feel a

discomfort or pain in any body part such as eyes, ears, hands, arms, feet,

discontinue use immediately. If the condition persists, seek medical attention.

Radio waves

Radio waves may affect electronic equipment or medical devices (for example,

pacemakers), which may cause malfunctions and possible injuries.



If you use a pacemaker or other medical device, consult your physician or the

manufacturer of your medical device before using the wireless networking

feature (Bluetooth

®

and wireless LAN).



Do not use the wireless networking feature in the following locations:

– Areas where wireless network use is prohibited, such as in hospitals. Abide

by medical institution regulations when using the system on their premises.

– Areas near fire alarms, automatic doors and other types of automated

equipment.

3D im

Some peo

nausea) w

3D televis

discontin

Generall

y

system a

playing s

of neces

s

are long e

persist, c

The vision

developm

young ch

should su

above.

Syste

The Syste

from Sony

http://www

Abou

This prod

must com

applicabl

3

WARNING

CECH-2508B 4-209-278-21(1) GB

GB

ve

tor prior

n,

perience

nd

ms

e,

feel a

t,

tion.

ample,

n or the

ing

Abide

mises.

d

3D images

Some people may experience discomfort (such as eye strain, eye fatigue, or

nausea) while watching 3D video images or playing stereoscopic 3D games on

3D televisions. If you experience such discomfort you should immediately

discontinue use of your television until the discomfort subsides.

Generally we recommend that you avoid prolonged use of your PlayStation

®

3

system and take 15 minutes breaks during each hour of play. However, when

playing stereoscopic 3D games or watching 3D video, the length and frequency

of necessary breaks may vary from person to person – please take breaks that

are long enough to allow any feelings of discomfort to subside. If symptoms

persist, consult your doctor.

The vision of young children (especially those under six years old) is still under

development. Consult with your child’s doctor or optometrist before allowing

young children to watch 3D video images or play stereoscopic 3D games. Adults

should supervise young children to ensure they follow the recommendations listed

above.

System software

The System Software included within this product is subject to a limited licence

from Sony Computer Entertainment Inc. Refer to

http://www.scei.co.jp/ps3-eula for further details.

About national export control

This product may fall within the scope of national export control legislation. You

must comply fully with the requirements of such legislation and of all other

applicable laws of any jurisdiction in relation to this product.

4

CECH-2508B 4-209-278-21(1) GB

Prec

Safe

This prod

electrical

shock or

guidelin

e



Obser

v



Regul

a

the pow



Stop u

s

any oth

produc



Conta

c

found w

Use



Use in



Avoid

p

hour of



Avoid

p



Stop u

s

discom

Contro



If you

e

system

– Dizzi

– Disc



Keep t

h

reach o



Do not

(powe

r

Part names ............................................................................... 12

Getting started .......................................................................... 13

Connection methods ......................................................................13

Performing initial setup of the system software ..............................15

Video output on the PS3™ system ................................................16

Connecting digital audio devices ...................................................20

Turning the PS3™ system on and off ....................................... 21

Using the wireless controller ..................................................... 22

Playing content ......................................................................... 24

Blu-ray Disc (BD)/DVD/CD .............................................................24

Playing content on USB devices .................................................... 25

File formats that can be played or viewed ......................................25

Playing games .......................................................................... 26

Game compatibility ........................................................................26

Playing games ...............................................................................26

Controller settings ..........................................................................26

Saved data for PlayStation

®

3 format software ............................... 27

Saved data for PlayStation

®

format software ................................. 27

Adjusting network settings ........................................................ 28

Adjusting network settings (wired) .................................................29

Adjusting network settings (wireless) .............................................29

Adjusting custom settings ..............................................................31

Connecting to the Internet ........................................................ 32

Using the Internet browser ............................................................. 32

Viewing the user’s guide ................................................................32

Creating a PlayStation

®

Network account .......................................32

PS3™ system updates ............................................................. 33

Using the on-screen keyboard .................................................. 34

Parental control ........................................................................ 35

Replacing the hard disk ............................................................ 36

Backing up data .............................................................................36

Removing the hard disk .................................................................37

Replacing the hard disk .................................................................38

Reinstalling the system software ...................................................39

Restoring data that has been backed up .......................................40

Transferring data to another PS3™ system /

restoring the system ................................................................. 41

Transferring data to another PS3™ system ...................................41

Restoring the PS3™ system .......................................................... 41

Before disposing of or transferring the PS3™ system ...................41

Before requesting service ......................................................... 42

Table of contents

WARNING ......................................................................................... 2

Precautions ....................................................................................... 5

Online information about the PS3™ system ................................... 10

XMB

™

(XrossMediaBar) menu ....................................................... 11

Specifications .................................................................................. 47

GUARANTEE .................................................................................. 50

Copyright and trademarks ............................................................... 52

5

Precautions

CECH-2508B 4-209-278-21(1) GB

Precautions

GB

Safety

This product has been designed with the highest concern for safety. However, any

electrical device, if used improperly, has the potential for causing fire, electrical

shock or personal injury. To help ensure accident-free operation, follow these

guidelines:



Observe all warnings, precautions and instructions.



Regularly inspect the AC power cord for damage and for dust build-up around

the power plug or electrical outlet.



Stop use, unplug the AC power cord from the electrical outlet and disconnect

any other cables immediately if the device functions in an abnormal manner,

produces unusual sounds or smells or becomes too hot to touch.



Contact the appropriate PlayStation

®

customer service helpline which can be

found within every PlayStation

®

3 software manual.

Use and handling



Use in a well-lit area and keep a safe distance from the TV screen.



Avoid prolonged use of the PS3™ system. Take a 15-minute break during each

hour of play.



Avoid playing when you are tired or need sleep.



Stop using the system immediately if you begin to feel tired or if you experience

discomfort or pain in your hands or arms while operating the Wireless

Controller. If the condition persists, consult a doctor.



If you experience any of the following health problems, discontinue use of the

system immediately. If symptoms persist, consult a doctor.

– Dizziness, nausea, fatigue or symptoms similar to motion sickness

– Discomfort or pain in a part of the body, such as eyes, ears, hands or arms



Keep the system and accessories, including cable ties and fasteners, out of the

reach of small children.



Do not connect cables other than a USB cable while the system is turned on

(power indicator lit solid green).



Do not touch the system or connected cables or accessories during an

electrical storm.



Do not use the system or accessories near water.



Do not allow liquid, small particles or other foreign objects to get into the

system or accessories.



Do not touch the connectors of the system or accessories.



Do not expose the system or accessories to dust, smoke or steam. Also, do not

place the system in an area subject to excessive dust or cigarette smoke. Dust

build-up or cigarette smoke residue on the internal components (such as the

lens) may cause the system to malfunction.



Do not expose the system or accessories to high temperatures, high humidity

or direct sunlight.



Do not place the system or accessories on surfaces that are unstable, tilted or

subject to vibration.



Do not set the system other than in the vertical or horizontal position. When

setting the system in the vertical position, use the vertical stand (sold

separately) for this model of the system. Also, do not change the position while

the system is turned on.



Be careful when carrying the system. If you do not have a good grip, the

system may drop causing potential damage or injury.



Do not move or change the position of the system with a disc inserted. The

vibration may result in scratching of the disc or the system.



Do not turn off the system while data is being saved on or loaded from the hard

disk.



Do not stand on or put objects on the system, and do not stack the system with

other devices.



Do not place the system and connected accessories on the floor or in a place

where they may cause someone to trip or stumble.



Do not allow bodily contact with the system or air from the system vents for an

extended period of time while in use. Extended contact under these conditions

may cause low-temperature burns.

....... 32

.........32

....... 33

....... 34

....... 35

....... 36

.........36

.........37

.........38

.........39

.........40

....... 41

.........41

....... 42

..... 47

..... 50

..... 52

6

Precautions

CECH-2508B 4-209-278-21(1) GB



When connecting the system to a plasma or projection* TV, do not leave a still

image on the TV screen for an extended period of time, as this may leave a

faint image permanently on the screen.

* Except LCD screen types



Parents are encouraged to monitor children in online activities to ensure safe

and responsible Internet usage. Refer to http://www.ps-playsafeonline.com for

further details.

Notes on safety when using the DUALSHOCK

®

3

Wireless Controller*



Do not use the vibration function if you have any ailment or injury to the bones,

joints or muscles of your hands or arms. If you have an ailment or an injury, do

not play such titles using the DUALSHOCK

®

3 Wireless Controller unless you

have set the vibration function to [Off].



When using the motion sensor function of the Wireless Controller, be cautious of

the following points. If the controller hits a person or object, this may cause

accidental injury or damage.

– Before using the motion sensor function, make sure you have enough space

to move around.

– Firmly grip the Wireless Controller to prevent it from slipping out of your grasp

and causing damage or injury.

– When using the Wireless Controller with a USB cable, ensure that the cable

cannot hit a person or any object, and do not pull the cable out of the PS3™

system whilst playing.

* These notes also apply to other controllers.

Vents

Do not block any vents. To maintain good ventilation, follow the guidelines below:



Place the system at least 10 cm away from a wall surface.



Do not place on a carpet or rug with long fibres.



Do not place in a narrow or cramped space.



Do not cover with cloth.



Do not allow dust to build up on the vents.

AC power cord use



To help ensure safe operation, regularly inspect the AC power cord. If

damaged, stop use immediately and contact the appropriate PlayStation

®

customer service helpline which can be found within every PlayStation

®

3

software manual.



Do not use a power cord other than the supplied AC power cord. Do not modify

the cord.



Do not touch the plug of the AC power cord with wet hands.



Protect the AC power cord from being walked on or pinched particularly at

plugs, expansion receptacles and the point where the cord exits from the

system.



Do not place heavy items on the cord.



Do not place the AC power cord near heating equipment and do not expose

the cord to heat.



Do not allow dust or foreign matter to build up around the AC IN connector.

Before connecting or plugging in the AC power cord, check that there is no

dust or foreign matter in or on the power plug or connecting end of the cord,

the electrical outlet or the AC IN connector on the system rear. If the plug or

connector becomes dirty, wipe off with a dry cloth before connecting.



Unplug the AC power cord from the electrical outlet before cleaning or moving

the system, or when you do not intend to use the system for an extended period

of time. When disconnecting, grasp the power cord by the plug and pull

straight out of the electrical outlet. Never pull by the cord and do not pull out at

an angle.



Do not connect the AC power cord to a voltage transformer or inverter.

Connecting the AC power cord to a voltage transformer for overseas travel or

an inverter for use in an automobile may cause heat to build up in the system

and may cause burns or a malfunction.

Neve

Use the P

product d

system o

provided

warranty.

supplied

Addition

a

shock.

Netw



A broa



User i

s

provide



Use o

n

1000BA

line or

of cor

d

through

malfun

Wire



The 2.

4

this pro

design

Howe

v

connec

termina

7

Precautions

CECH-2508B 4-209-278-21(1) GB

GB

on

®

3

ot modify

y at

he

xpose

ctor.

is no

cord,

ug or

moving

ed period

ull

ull out at

avel or

system

Never disassemble or modify the system or accessories

Use the PS3™ system and accessories according to the instructions in the

product documentation. No authorisation for the analysis or modification of the

system or accessories, or the analysis and use of its circuit configurations, is

provided. Unauthorised modification of the system or accessories will void your

warranty. There are no user serviceable components inside the PS3™ system (the

supplied hard disk may be removed but not disassembled or modified).

Additionally, there is a risk of exposure to laser radiation as well as to electrical

shock.

Network



A broadband Internet connection is required to connect to a network.



User is responsible for Internet service fees. For details, refer to the information

provided in your service contract or contact your Internet service provider.



Use only an Ethernet cable compatible with 10BASE-T, 100BASE-TX or

1000BASE-T networks. Do not use a cord for a standard residential telephone

line or cables of types other than those mentioned here. Using the wrong type

of cord or cable can cause more electrical current than necessary to flow

through the LAN connector, which may lead to heat build-up, fire or

malfunction.

Wireless networking feature



The 2.4 GHz range of radio waves used by the wireless networking feature of

this product is a range shared by various devices. This product has been

designed to minimise the effect of other devices using the same range.

However, in some cases interference from other devices may reduce the

connection speed, shorten the signal range or cause the connection to be

terminated unexpectedly.



When using the PS3™ system’s scan function to select a wireless LAN access

point, access points that are not intended for public use may be displayed.

Only connect to an access point that you are authorised to use, or one that is

available through a public wireless LAN or hotspot service.

Moisture condensation

If the system or disc is brought directly from a cold location to a warm one,

moisture may condense on the lens inside the system or on the disc. Should this

occur, the system may not operate properly. In this case, remove the disc and

turn off and unplug the system. Do not put the disc back in until the moisture

evaporates (this may take several hours). If the system still does not operate

properly, contact the appropriate PlayStation

®

customer service helpline which

can be found within every PlayStation

®

3 software manual.

Cleaning

For safety reasons, before cleaning the system or connected accessories,

disconnect the AC power cord from the electrical outlet.

Exterior surfaces (plastic cover of system and Wireless

Controller)

Follow the instructions below to help prevent the product exterior from

deteriorating or becoming discoloured.



Wipe with a soft, dry cloth.



Do not apply insecticides or other volatile substances.



Do not place any rubber or vinyl materials on the product exterior for an

extended period of time.



Do not use solvents or other chemicals. Do not wipe with a chemically-treated

cleaning cloth.

8

Precautions

CECH-2508B 4-209-278-21(1) GB

Vents

When dust accumulates in the system vents, remove the dust with a low-powered

vacuum cleaner.

Connectors

Do not use when the connectors of the system or the AC power cord are not

clean. If used when dirty, the flow of electrical current may be obstructed.

Remove the dirt with a dry cloth.

Discs

Note on compatibility

Some media may have region or territorial restrictions and may not work with your

system. See media packaging for details.

Handling



Do not touch the disc surface when handling a disc; hold it by the edges.



Do not stick paper or tape onto discs and do not write on discs.



Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce

sound quality. Always handle carefully and check that discs are clean before

use.

Storage



Do not expose discs to high temperatures, high humidity or direct sunlight.



When discs will not be used for an extended period of time, store them in their

cases. Stacking uncased discs or storing them at an angle can cause them to

warp.

Cleaning method



Clean discs with a soft cloth, lightly wiping from the centre

outwards.



Do not use solvents, record cleaners, anti-static spray or other

chemicals as these can damage the discs.

9

Precautions

CECH-2508B 4-209-278-21(1) GB

GB

10

CECH-2508B 4-209-278-21(1) GB

Online information about the PS3™ system

This manual explains hardware features and provides basic information about how to

set up and operate the PS3™ system, including warnings and precautions for the safe

and proper use of the system. You can also access the following information available

on the Internet.

Online user’s guide access from : eu.playstation.com/manuals

This guide contains detailed information about using the PS3™ system.

System software updates http://eu.playstation.com/ps3

This site provides the latest information about system software updates.

PlayStation

®

3 official site http://eu.playstation.com/ps3

The official site for PlayStation

®

3 products provides the latest information about software titles and

hardware accessories.

Support http://eu.playstation.com/help-support

The official site for PlayStation

®

product support provides the latest questions and answers about

your product.

Friends

Chatting and exchanging messages

PlayStation

®

Network

Using PlayStation

®

Network services

Network

Connecting to the Internet

Game

Playing games

Video

Playing video

Music

Playing music

Photo

Displaying images

Settings

Adjusting PS3™ system settings

Users

Selecting users to log in to the PS3™

system

Check that you have all of the following items. If any items are missing, contact the

appropriate PlayStation

®

customer service helpline which can be found within

every PlayStation

®

3 software manual.

 PlayStation

®

3 system

 Printed materials

 DUALSHOCK

®

3 Wireless Controller

 AC Power Cord

 AV Cable  USB Cable

Information about system functionality and images published in this document may vary from

those for your PS3™ system, depending on the system software version in use.

XMB

The PS3

Options

Displaye

pressing

11

CECH-2508B 4-209-278-21(1) GB

sages

rvices

gs

PS3™

XMB

™

(XrossMediaBar) menu

Category

Item

The PS3™ system includes a user interface called XMB

™

(XrossMediaBar).

Directional buttons:

Used to select on-screen

categories/items

button:

Displays the options

menu/control panel

button:

Cancel an operation

button:

Confirm the selected

item

PS button :

Displays the XMB

™

menu

Turns the system on/off

Quits a game

Options menu Control panel

Displayed by selecting an icon and

pressing the button

Displayed by pressing the button during

content playback

12

CECH-2508B 4-209-278-21(1) GB

Part names Gett

System front / rear

Disc slot

Power button

Eject button

WLAN access indicator

HDD access indicator

USB connectors

Vent

AC IN connector

AV MULTI OUT connector

DIGITAL OUT (OPTICAL)

connector

LAN connector

HDMI OUT connector

DUALSHOCK

®

3 Wireless Controller

SELECT button

USB connector

L2 button

L1 button

Directional

buttons

Left stick/

L3 button*

R2 button

R1 button

button

Right stick/

R3 button*

Port indicators

START button

PS button

* The L3 and R3 buttons function when the sticks are pressed.

If video

If you cha

system to

video doe

turn it on

least five

video ou

t

output at



Conn

Caution



Do not use the system in a closed cabinet or other locations where heat may

build up. Doing so may cause the system to overheat and may lead to fire,

injury or malfunction.



If the system’s internal temperature becomes elevated, the power indicator

will flash alternately in red and green. In this case, turn off the system

(

page 21) and leave it unused for a while. After the system cools down,

move it to a location with good ventilation, and then resume use.

Notices



Do not place the system in an area subject to excessive dust or cigarette

smoke. Dust build-up or cigarette smoke residue on the internal

components (such as the lens) may cause the system to malfunction.



Do not move or change the position of the system while the power indicator

is lit solid green or flashing green. The vibration that occurs as a result of

moving the system may cause data loss or corruption, or damage to the

system.

Hint

When placing the system in a vertical position, use the vertical stand (sold

separately).

13

Getting started

CECH-2508B 4-209-278-21(1) GB

Getting started

GB

ector

/

ton

If video is not displayed on the screen

If you change the type of cable used to connect the

system to a TV, video may not appear on the screen. If

video does not appear, turn off the system and then

turn it on again by pressing the power button for at

least five seconds (until the system beeps twice). The

video output setting will be reset and video will be

output at standard definition (SD) resolution.



HDMI OUT

connector

AV MULTI OUT

connector

Connection methods



Connect your system to a TV

You can use any of the following methods to connect your system to a TV.

VIDEO L

-

AUDIO

-

R

AV MULTI OUT

connector

AV Cable

TV

HDMI OUT

connector

HDMI Cable (sold separately)

Video output in HD (High Definition) resolution - component video

YLR

P

R

/C

R

P

B

/C

B

COMPONENT VIDEO IN AUDIO IN

Component AV Cable

(sold separately)

AV MULTI OUT

connector

TV

Video output in HD (High Definition) resolution - HDMI™

Video output in SD (Standard Definition) resolution

Hints



For details about video output cable types and supported video modes, see "Video output on the

PS3™ system" (

page 16) and "Video output cable types" ( page 17).



You can connect audio devices that support digital audio playback, such as an AV receiver for home

entertainment use. For details, see "Connecting digital audio devices" (

page 20).

rette

.

dicator

lt of

the

d

14

Getting started

CECH-2508B 4-209-278-21(1) GB



Perfo

After tur

1 Turn

mat

2 Pres

The

scre

e

3 Con

cab

4 Pres

The s

the in



LAN connector AC IN connector



Connect an Ethernet cable (sold separately)

Use an Ethernet cable to connect the system to the Internet.

Hint

You can use a wireless network connection to connect to the Internet without using an Ethernet cable.

For details, see "Adjusting network settings" (

page 28).

Caution

Do not connect a standard telephone line or other types of cords or cables that are not compatible

with the system directly to the LAN connector on the system, as this may cause heat build-up, fire

or malfunction.



Connect the AC power cord

After plugging the AC power cord into the electrical outlet, the power indicator on the

PS3™ system will light up in solid red ( page 21).

Caution

Do not plug the AC power cord for the system into an electrical outlet until you have made all other

connections.

Some regions and countries may use a

different electrical outlet plug from the

one illustrated.

15

Getting started

CECH-2508B 4-209-278-21(1) GB

GB

Performing initial setup of the system software

After turning on the system, perform initial setup.

1 Turn on the TV, and then switch the video input of the TV to

match the input connector used by the PS3™ system.

2 Press the power button.

The power indicator turns green and the picture is displayed on the TV

screen.

Power button

Power indicator

3 Connect the wireless controller to the system using a USB

cable.

4 Press the PS button on the controller.

The system will recognise the controller. After it has recognised the controller,

the initial setup screen will be displayed.

5 Perform initial setup.

Follow the on-screen instructions to enter settings for system language, time

zone, date and time, and user name.

The screen for setting up the Internet connection will be displayed. When

connecting using an Ethernet cable, basic settings will be selected

automatically if you follow the on-screen instructions. When connecting over

a wireless LAN, follow the instructions in "Adjusting network settings

(wireless)" (

page 29) to set up the connection.

After the settings have been completed, the XMB

™

menu (

page 11) will

be displayed on the TV screen.

Hints



When using an HDMI cable to connect the system to the TV, a screen for

changing the video output resolution will be displayed during initial setup. If you

select [Yes] on the screen and then press the

button, the optimal output

resolution will be selected automatically.



For details on entering text, see "Using the on-screen keyboard" (

page 34).



Settings entered during initial setup can be changed under (Settings) or

(Users). For details, refer to the online user’s guide

(access from : eu.playstation.com/manuals).

cable.

ible

ire

e

ther

16

Getting started

CECH-2508B 4-209-278-21(1) GB

Video output on the PS3™ system

The PS3™ system can output two types of resolution: HD and SD. Refer to the instruction manual for the TV in use to check which video mode is

supported.

HD

(High Definition)

SD

(Standard Definition)

Video mode *

1

1080p 1080i 720p 576p 576i *

2

Aspect ratio

16:9 16:9 16:9

16:9

4:3

16:9

4:3

*

1

This number indicates the number of scan lines. Note that "i" stands for "interlace" and "p" stands for "progressive". Using progressive results in high-quality video with

minimal flickering.

*

2

The video output setting on the system will display as [Standard (PAL)].

Screens showing the difference in resolution

HD screen SD screen

Vide

The reso

in use.

HDMI C

(sold se

Compo

n

(sold se

S VIDE

O

(sold se

AV Cabl

(supplie

*

1

Depen

*

2

Conne

video

a

*

3

The vid

17

Getting started

CECH-2508B 4-209-278-21(1) GB

GB

de is

deo with

Video output cable types

The resolution displayed on the TV varies depending on the input connectors on the TV and the type of cable in use. Select a cable to match the TV

in use.

Cable type Input connector on the TV Supported video modes*¹

HDMI Cable*²

(sold separately)

HDMI IN connector

1080p / 1080i / 720p / 576p

Component AV Cable

(sold separately)

Component VIDEO IN

connector

YLRPR/CRPB/CB

COMPONENT VIDEO IN AUDIO IN

1080p / 1080i / 720p / 576p / 576i*

3

S VIDEO Cable

(sold separately)

S VIDEO IN connector

S VIDEO L

-

AUD I O

-

R

576i*

3

AV Cable

(supplied)

VIDEO IN connector

(composite)

VIDEO L

-

AUD I O

-

R

576i*

3

*

1

Depending on the type of TV or content to be played, some video modes may not be supported.

*

2

Connect the system to the TV using an HDMI cable (sold separately). An HDMI cable can output both video and audio and enables you to enjoy digital-quality

video and audio.

*

3

The video output setting on the system will display as [Standard (PAL)].

18

Getting started

CECH-2508B 4-209-278-21(1) GB

Adjusting video output settings

Depending on the type of cables and the connectors used, you may

need to adjust the PS3™ system's video output settings to display

video at HD resolutions (

page 16) on a TV.

If video is not displayed



Switch the video input of the TV to match the input connector used to

connect to the system.



Turn off the system, and then turn it on again by pressing the power button

for at least five seconds (until the system beeps twice). The video output

setting will be reset and video will be output at standard definition (SD)

resolution.

1 Select (Settings) (Display Settings) [Video Output

Settings], and then press the button.

2 Select the input connector ( page 17) in use on the TV, and

then press the button.

If you select [HDMI], you will have the option to choose [Automatic] or

[Custom] on the next screen. In most cases, select [Automatic], and video

output settings will be completed automatically.

If you select [AV MULTI / SCART], you must choose the type of output signal

on the next screen. In most cases, select [Y Pb/Cb Pr/Cr].

3 Confirm the screen, and then press the button.

If you changed the connector in step 2, a screen for confirming the change

will be displayed.

4 Confirm the settings, select [Yes], and then press the button.

If you changed the connector in step 2, a screen for confirming the settings

will be displayed.

5 Select the resolutions supported by the TV, and then press the

button.

The resolution displayed on the TV varies depending on the input connector

and the type of cable used (

page 17). The highest resolution you

selected will be used for video output.

Depending on the connector selected in step 2, this screen may not be

displayed.

6 Con

b

Depe

in ste

7 Sele

If you

TV sc

If you

autom

will n

8 Con

The v

19

Getting started

CECH-2508B 4-209-278-21(1) GB

GB

change

button.

settings

ss the

nnector

u

be

6 Confirm the settings, select [Yes], and then press the

button.

Depending on the connector selected in step 2 and the resolutions selected

in step 5, this screen may not be displayed.

7 Select the type of TV, and then press the button.

If you selected [Standard (PAL)] or [576p] in step 5, a screen for selecting the

TV screen size will be displayed. Adjust the setting to match the TV in use.

If you selected [720p] or a higher resolution in step 5, the TV type will

automatically be set to 16:9 and the screen for selecting the TV screen size

will not be displayed.

8 Confirm the settings, and then press the button.

The video output settings will be saved on the system.

9 Adjust audio output settings.

Continue on to adjust audio output settings. Adjust settings to match the TV

or audio device in use.

If you select [HDMI], you will have the option to choose [Automatic] or

[Manual] on the next screen. In most cases, select [Automatic].

If using a cable other than an HDMI cable to output audio from the TV, select

[Audio Input Connector / SCART / AV MULTI]. If using an optical digital cable

to output audio, select [Digital Out (Optical)] and choose the output format

on the next screen.

10 Confirm the settings, and then press the button.

The audio output settings will be saved on the system.

Hints



You can adjust audio output settings under

(Settings) (Sound

Settings)

[Audio Output Settings].



If the TV in use supports 3D Stereoscopic display, a screen for setting the TV’s

screen resolution will be displayed after step 2. Follow the on-screen

instructions to adjust the settings. Connect the PS3™ system to a TV that

supports 3D Stereoscopic display using an HDMI cable.

20

Getting started

CECH-2508B 4-209-278-21(1) GB

Connecting digital audio devices

You can connect audio devices that support digital audio playback,

such as an AV receiver for home entertainment use.

Audio output on the PS3™ system

The supported channels may vary depending on the output connector

to be used.

PS3™ system output connectors

Channels that can be used for output

2 Ch. 5.1 Ch. 7.1 Ch.

AV MULTI OUT connector

 

DIGITAL OUT (OPTICAL) connector

 

HDMI OUT connector



Hints



When connecting a digital audio device to the system, go to

(Settings)

(Sound Settings) [Audio Output Settings], and then adjust the settings as

necessary for the audio device.



For simultaneous audio output from multiple connectors, go to

(Settings)

(Sound Settings) [Audio Multi-Output], and set the option to [On].



The system can output both audio and video through an HDMI cable. If both

the TV and the audio device have HDMI connectors, you can output the TV

picture to the TV through a connected audio device.



If a device is connected to the PS3™ system via an HDMI cable, do not turn off

the device while the system is turned on (power indicator is lit solid green), as

doing so may cause sound distortion or produce abnormal sounds.

Examples when connecting an audio device

An HDMI cable or optical digital cable can be used to connect an

audio device to the PS3™ system.

HDMI cable Optical digital cable

HDMI cable

(sold separately)

Digital audio device

Optical digital

cable for audio

(sold separately)

Video output cable for the

TV in use (

page 17)

HDMI cable

(sold separately)

TV TV

Страница загружается ...

Sony 320GB (CECH-2508B) + Move Starter Pack Руководство пользователя

Sony 320GB (CECH-2508B) + Move Starter Pack Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов