2
7
3
4
1
65
3
4 5
2
8
1
76
VE811 HDMI HDBaseT Extender Extensor de HDMI HDBaseT VE811
Extension HDBaseT HDMI VE811 Estensore VE811 HDMI HDBaseT
HDMI-HDBaseT-Extender VE811 Удлинитель HDMI HDBaseT VE811
www.aten.com www.aten.com
www.aten.com www.aten.com
www.aten.com www.aten.com
A
Hardware Review
VE811T Front and Rear View
1
Power jack
2
HDBaseT output port
3
Link LED
4
Power LED
5
Long Reach Switch
6
F/W upgrade port
7
HDMI input port
Troubleshooting
The Firmware upgrade port is reserved for tech support. If you would like to do
fi rmware upgrade yourself, please contact your dealer.
B
Hardware Installation
1
Connect the HDMI Input Port on the VE811T to the HDMI Output Port on your
video source device using HDMI cable.
2
Connect one end of the RJ-45 cable to the HDBaseT output port on the
transmitter. Then connect the other end of the RJ-45 cable to the HDBaseT
input port on the receiver.
3
Connect the HDMI Output Port on the VE811R to the HDMI Input Port on
your video display device using HDMI Cable.
4
Plug the power adapter cable into the power jack on the VE811.
Working in Long Reach Mode
The VE811 supports long reach mode. When this mode is applied, the maximum
range can be enhanced to 150 meters at resolutions up to 1080p.
A
Hardware Review
B
Hardware Installation
© Copyright 2017 ATEN
®
International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All
other trademarks are the property of their respective owners.
This product is RoHS compliant.
Part No. PAPE-1223-I40G Printing Date: 06/2017
HDMI HDBaseT Extender
Quick Start Guide
VE811
ATEN VanCryst
™
VE811 Package Contents
1 VE811 HDMI HDBaseT Transmitter
1 VE811 HDMI HDBaseT Receiver
2 Power Adapters
1 User Instructions
VE811T Package Contents
1 VE811T HDMI HDBaseT Transmitter
1 Power Adapter
1 User Instructions
VE811R Package Contents
1 VE811R HDMI HDBaseT Receiver
1 Power Adapter
1 User Instructions
Source Device
VE811T
VE811R
Display
1
2
3
4
4
VE811T (Front)
VE811T (Rear)
VE811R (Front)
VE811R (Rear)
VE811T Front and Rear View
VE811R Front and Rear View
VE811T Top View
VE811R Top View
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and
specifi cations contained in this package are subject to change without
prior notifi cation bythe manufacturer.
To reduce the environmental impact of our products, ATEN
documentation and software can be found online at
http://www.aten.com/download/
Technical Support
www.aten.com/support
이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며,
가정외의 지역에서 사용하는 것을 목적으로 합니다.
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifi cations not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
Warning: Operation of this equipment in a residential environment could cause radio interference.
Suggestion: Shielded twisted pair (STP) cables must be used with the unit to ensure compliance with
FCC & CE standards.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) this device mat not cause harmful interference, and(2) this device must accept any
interference received, including interference that may cause undesired operation.
Scan for
more information
VE811R Front and Rear View
1
Power Jack
2
HDBaseT input port
3
HDMI out LED
4
Link LED
5
Power LED
6
Long Reach Switch
7
F/W upgrade port
8
HDMI output port
A
Aperçu du matériel
Vue de face et de dos du VE811T
1
Fiche d'alimentation
2
Port de sortie HDBaseT
3
LED Liaison
4
LED d'alimentation
5
Commutateur longue portée
6
Port de mise à niveau F/W
7
Port d'entrée HDMI
Dépannage
Le port de mise à niveau du fi rmware est réservé à l’assistance technique. Si
vous voulez faire une mise à niveau du fi rmware vous-même, veuillez contacter
votre revendeur.
B
Installation du matériel
1
Raccordez le port d’entrée HDMI du VE811T au port de sortie HDMI sur votre
appareil source vidéo à l’aide du câble HDMI.
2
Branchez une extrémité du câble RJ-45 sur le port de sortie HDBaseT de
l'émetteur. Branchez ensuite l’autre extrémité du câble RJ-45 sur le port
d’entrée HDBaseT du récepteur.
3
Raccordez le port de sortie HDMI du VE811R au port d’entrée HDMI sur votre
périphérique d’affi chage vidéo à l’aide du câble HDMI.
4
Branchez le câble de l'adaptateur secteur dans la prise d'alimentation du
VE811.
Fonctionnement en mode longue portée
Le VE811 prend en charge le mode longue portée. Lorsque ce mode est appliqué,
la portée maximum peut être prolongée jusqu’à 150 mètres, à des résolutions
jusque 1080p.
Vue de face et de dos du VE811R
1
Fiche d'alimentation
2
Port d’entrée HDBaseT
3
LED de sortie HDMI
4
LED Liaison
5
LED d'alimentation
6
Commutateur longue portée
7
Port de mise à niveau F/W
8
Ports de sortie HDMI
A
Hardwareübersicht
VE811T – Ansicht von vorne und
hinten
1
Netzanschluss
2
HDBaseT-Ausgang
3
Verbindung-LED
4
Betriebsanzeige-LED
5
Reichweitenschalter
6
F/W-Aktualisierungsanschluss
7
HDMI-Eingang
Problemlösung
Der Firmware-Aktualisierungsanschluss ist für den technischen Support
reserviert. Wenden Sie sich an Ihren Händler, falls Sie selbst eine Firmware-
Aktualisierung durchführen möchten.
B
Hardwareinstallation
1
Verbinden Sie den HDMI-Eingang am VE811T per HDMI-Kabel mit dem HDMI-
Ausgang an Ihrem Videoeingangsgerät.
2
Verbinden Sie ein Ende des RJ-45-Kabels mit dem HDBaseT-Ausgang am
Sender. Schließen Sie dann das andere Ende des RJ-45-Kabels an den HDBaseT-
Eingang am Empfänger an.
3
Verbinden Sie den HDMI-Ausgang am VE811R per HDMI-Kabel mit dem
HDMI-Eingang an Ihrem Videoanzeigegerät.
4
Schließen Sie das Netzteilkabel an den Netzanschluss am VE811 an.
Im Reichweitenmodus arbeiten
Der VE811 unterstützt den Reichweitenmodus. Wenn dieser Modus angewandt
wird, kann die maximale Reichweite auf 150 Meter erweitert werden, bei
Aufl ösungen bis 1080p.
VE811R – Ansicht von vorne und
hinten
1
Netzanschluss
2
HDBaseT-Eingang
3
HDMI-Ausgang-LED
4
Verbindung-LED
5
Betriebsanzeige-LED
6
Reichweitenschalter
7
F/W-Aktualisierungsanschluss
8
HDMI-Ausgang
A
Resumen de hardware
Vista frontal y posterior del
VE811T
1
Conector de alimentación
2
Puerto de salida HDBaseT
3
LED de vínculo
4
LED de alimentación
5
Conmutador de largo alcance
6
Puerto de actualización de F/W
7
Puerto de entrada HDMI
Resolución de problemas
El puerto de actualización del fi rmware está reservado para el soporte técnico.
Si desea realizar la actualización del fi rmware usted mismo, póngase en
contacto con su distribuidor.
B
Instalación del hardware
1
Conecte el puerto de entrada HDMI del VE811T al puerto de salida HDMI del
dispositivo fuente de vídeo mediante el cable HDMI.
2
Conecte un extremo del cable RJ-45 al puerto de salida HDBaseT en el
transmisor. A continuación, conecte el otro extremo del cable RJ-45 al puerto
de entrada HDBaseT en el receptor.
3
Conecte el puerto de salida HDMI del VE811R al puerto de entrada HDMI del
dispositivo de visualización de vídeo mediante el cable HDMI.
4
Enchufe el cable del adaptador de alimentación en el conector de alimentación
del VE811.
Trabajar en modo Largo Alcance
El VE811 admite el modo de largo alcance. Cuando se aplica este modo, el
alcance máximo se puede extender hasta 150 metros, con resoluciones de hasta
1080p.
Vista frontal y posterior del
VE811R
1
Conector de alimentación
2
Puerto de entrada HDBaseT
3
LED de salida HDMI
4
LED de vínculo
5
LED de alimentación
6
Conmutador de largo alcance
7
Puerto de actualización de F/W
8
Puerto de salida HDMI
A
Обзор аппаратного обеспечения
VE811T Вид спереди и сзади
1
Разъем питания
2
Выходной порт HDBaseT
3
Индикатор связи
4
Индикатор питания
5
Переключатель дальнего
действия
6
Разъем обновления
микропрограммы
7
Входной порт HDMI
Поиск и устранение неисправностей
Порт обновления микропрограммы зарезервирован для технического
обслуживания. Чтобы самостоятельно выполнить обновление
микропрограммы, обратитесь к продавцу.
B
Установка аппаратного обеспечения
1
Подключите входной порт HDMI на VE811T к выходному порту HDMI на
источнике видеосигнала кабелем HDMI.
2
Подключите другой конец кабеля RJ-45 к выходному порту HDBaseT на
передатчике. Затем подключите другой конец кабеля RJ-45 к входному
порту HDBaseT на приемнике.
3
Подключите выходной порт HDMI на VE811R к входному порту HDMI на
источнике видеосигнала кабелем HDMI.
4
Подключите сетевой шнур адаптера к разъему питания на VE811.
Работа в режиме дальнего действия
VE811 поддерживает режим дальнего действия. При работе в этом
режиме максимальный диапазон можно увеличить до 150 метров, а
разрешение до 1080p.
VE811R Вид спереди и сзади
1
Разъем питания
2
Входной порт HDBaseT
3
Индикатор вывода HDMI
4
Индикатор связи
5
Индикатор питания
6
Переключатель дальнего действия
7
Разъем обновления
микропрограммы
8
Выходной порт HDMI
A
Descrizione hardware
Vista anteriore e posteriore di
VE811T
1
Connettore di alimentazione
2
Porta di uscita HDBaseT
3
LED Link (Collegamento)
4
LED Power (Alimentazione)
5
Interruttore lungo raggio
6
Porta di aggiornamento F/W
7
Porta di ingresso HDMI
Risoluzione dei problemi
La porta di aggiornamento fi rmware è riservata per l'assistenza tecnica. Per
effettuare l'aggiornamento fi rmware da soli, contattare il rivenditore.
B
Installazione dell'hardware
1
Collegare la porta di ingresso HDMI di VE811T alla porta di uscita HDMI sul
dispositivo con la sorgente video usando il cavo HDMI.
2
Collegare un'estremità del cavo RJ-45 alla porta di uscita HDBaseT sul
trasmettitore. Quindi, collegare l'altra estremità del cavo RJ-45 alla porta di
ingresso HDBaseT sul ricevitore.
3
Collegare la porta di uscita HDMI di VE811R alla porta di ingresso HDMI sul
dispositivo per la visualizzazione video usando il cavo HDMI.
4
Collegare il cavo dell'adattatore di alimentazione al connettore di
alimentazione di VE811.
Funzionamento in Modalità lungo raggio
VE811 la Modalità lungo raggio. Quando si applica questa modalità, il raggio
massimo può essere ampliato a 150 metri, con risoluzioni fi no a 1080p.
Vista anteriore e posteriore di
VE811R
1
Connettore di alimentazione
2
Porta di ingresso HDBaseT
3
LED di uscita HDMI
4
LED Link (Collegamento)
5
LED Power (Alimentazione)
6
Interruttore lungo raggio
7
Porta di aggiornamento F/W
8
Porta di uscita HDMI
Страница загружается...
/