Telefunken TF-LED32S21T2 Руководство пользователя

Категория
ЖК-телевизоры
Тип
Руководство пользователя
Table of contents
3
LED TV/
Телевизор цветного
изображения c
жидкокристаллическим
экраном
TF-LED32S21T2
Instruction manual
Руководство по
эксплуатации
Table of contents
2
Table of contents
Table of contents
Before you start
Utilization of the product
Important safeguards
Installation
Base installation
Wall mounting
Connection
Outdoor antenna connection
Other connections
Operation
Control elements
Front panel
Back panel
Remote controller
Changing the battery
General operations
Signal sources
Teletext operations
OSD operation
Picture
Sound
Time
Channel
Option
Lock
Personal Video Recording (PVR)
Electronig Program Guide (EPG)/TimeShift
CI Information
USB operation
General playback information
Operations of file playback
General information
Troubleshooting
Causes of interference
Accessories
Specifications
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
2
3
3
3
4
4
5
5
5
5
6
6
6
6
7
8
8
8
8
9
9
9
10
10
10
11
11
12
12
12
12
13
14
14
14
14
15
Before you start
3
Before you start
If you want to dispose of this product, do not mix it with general household waste. There
is a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.
Utilization of the product
Important safeguards
Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.
This unit can be connected to a power
supply outlet without the third ground contact
as well as with a ground contact.
Always disconnect the power cord and
antenna during a thunderstorm.
Do not fix the power cord with a metal nail.
Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.
When unplugging the plug, always hold the
wide slot, do not touch the metal part, and do
not destroy, twist, pull or heat the power cord.
Please contact the service center
immediately if you found that the cable core is
bare or has been broken.
Please replace the AC outlet if the metal
plug cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires could happen.
Never touch the antenna or power plug
during a thunderstorm.
Do not touch the power plug with wet
hands.
Do not use any non-rated power socket
with numerous devices plugged into it. The
wire of non-designated capacity may cause fire
due to heat generation.
All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.
Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.
Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.
Excessive pressure on the panel may
damage the unit.
Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as damage to the product.
Please place the product on a flat surface
in a well-ventilated location. Keep it away
from open fire, direct sunlight, vibration, high
temperature and humidity.
Do not place any vases, potted plants,
cups, medicines or any other liquid containing
objects on the unit. Spillages may cause fire,
electric shock or breakdown.
Before you start
4
4
Before you start
Do not install the unit in locations with
a strong magnetic or current field as it may
cause malfunction. Picture deterioration due to
electromagnetic radiation in this environment is
also possible.
Do not place any fire source such as
candles close or on this product. If tipped over
or fallen down, it may cause damage or fire.
Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left, and right of the TV.
Please place all the signal cords behind
the rear panel.
Do not overexert or touch the panel when
carrying the product. Do not transport the LED
TV with the display faced up or down.
Do not transport the unit with the power
cord or the connection cable connected as it
may damage the power cord, connection cable
or connection terminal which may cause fire,
electric shock or breakdown.
Make sure that 2 persons or more carry
the device heavier than 18 kg. Dropping or
tipping over the device may damage it.
The temperature of the product’s body
becomes a little higher after a long period
of use. This indicates that heat exchange
is in normal working mode, thus please do
not let children or anyone who is sensitive to
temperature touch the unit.
All images provided herein are schematic
drawings of real objects and may differ
from their real life images.
Installation
Base instalation:
Place the LED TV on a solid flat surface.
Use soft material to place over the front screen
to avoid any damage.
Align the stands with the holes in the lower
part of the TV cabinet and fix the assembly with
two 4X14 screws.
Wall mounting
For wall mounting the back panel of this
unit is equipped with 4 screw holes (spread
distance 200*100 mm). A VESA wall-mount
bracket should be used for wall mounting (the
bracket is not included and should be acquired
separately).
Due to construction peculiarities, it is not
recommended to mount TVs on walls using
swinging and tilting brackets. Such a mounting
may not be steady.
Manufacturer is not responsible for improper
mounting resulting in damage of the unit.
WARNING
In order to avoid damage, make sure
to secure the unit on the wall
according to the wall mounting
instruction.
Installation
5
5
Installation
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the unit casing.
Other connections
Connect audio and video sources
(Including DVD, VCDR, CAMCORDER and
PC) to the AV input using the included AV
cable.
Plug the power cable in the electric outlet,
making sure the current voltage is supported.
If the video source has a HDMI output
jack, you can connect the signal to the TV by
the HDMI cable (not included).
Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.
PCMCIA slot is used for CI modules that
are obtained from your digital TV provider.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
The service port is used for updating the TV
software by qualified technicians only.
Operation
6
6
Operation
1
2
3
3
1. UP/DOWN/LEFT/RIGHT
buttons
2. ENTER/BACK/TURN ON/
OFF button
3. Speakers
1. Antenna input
2. AV input
3. HDMI inputs
4. USB port
5. Headphones socket
6. PCMCIA slot
7. Service port
Operation
8
8
Operation
Changing the battery
1. Remove the battery compartment cover
on the back of the RC.
2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Put the cover back.
The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.
Take the battery out of the RC if it is not
used for a long time.
Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.
General operations
Press POWER button on the unit or on
the RC to switch on the power, the indication
on the unit will light up. Press POWER button
again to switch off the power, and the light will
be in red color.
Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.
Press RETURN button on the RC to select
from the present channel and the previously
displayed channel.
Press MUTE button to cut off sound, press
this button again or adjust volume to resume
sound.
Press PR-/PR+ buttons to select previous
or next channels; or press number buttons to
enter a channel number directly.
Press PICTURE button repeatedly to cycle
through available video picture modes.
Press SOUND button repeatedly to cycle
through available sound modes.
Press NICAM button in TV mode
repeatedly to switch between Stereo, Mono,
SAP sound modes (can be unavailable for
some channels).
Press FREEZE button to freeze the picture
on or off.
Press FAV. button to show the favourite
channel list. Press UP/DOWN to select next
or previous favorite channel. Press ENTER to
confirm.
Signal sources
Press SOURCE button, then press DOWN/
UP cursor buttons on the RC or PR UP/PR
DOWN buttons on the panel to select a source
from available source list: DVBT - DVBC - ATV
- AV - PC - HDMI - USB. Press ENTER button
on the RC or FUNCTION button on the panel to
confirm.
TELETEXT operations (option)
Select the TV source mode. Then press
PR-/PR+ buttons to select TV channel in order
to pick up the picture signal of Teletext.
Press PR-/PR+ buttons to select the
previous page or the next page.
Teletext button functions are as follows:
HOLD: Press this button to stop the move
to the next page. Press this button again to
cancel operation.
INDEX: Press this button to go to the index
page.
CANCEL: Press this button to cancel the
teletext; press again to show the teletext.
REVEAL: Press this button to reveal the
concealed information. Press this button again
to conceal the information.
SUBPAGE: Press this button to select sub
page, then press Red/Green buttons to select
the desired subpage.
MIX: Press this button to mix the teletext
and current TV signal image (transparent
background).
RED/GREEN/YELLOW/BLUE buttons:
Press these 4 color buttons to access directly
to corresponding color page displayed at the
lower parts of teletext screen.
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Aspect Ratio
Noise Reduction
MPEG NR
Picture Mode: Select the automatic picture
control mode. Choices are Dynamic, Standard,
Mild and User.
Noise Reduction: Eliminates noise in the
picture. Choices are Off/Low/Middle/High.
(Not useful at PC source.)
MPEG NR: Eliminates noise generated while
creating digital picture signals. Choices are
Off/Low/Middle/High. (Not useful at PC source.)
Color Temperature: Select the overall color
tone of the picture. Choices are Cool, Medium,
Warm and User.
Aspect Ratio:
Select the aspect ratio (display
Select your favorite sound
mode for each input. Choices are Standard/
Music/Movie/Sports/User.
Adjusts the lower frequency of the
sound.
Adjusts the higher frequency of the
sound.
Control the sound balance
between the right and left loudspeaker
(earphone).
Adjust the volume
corresponding to the input audio level.
Contain On and Off.
Sound Mode:
Bass:
Treble:
Balance:
Auto Volume:
Sound Mode
Bass
Treble
Balance
Auto Volume
Surround Sound
AD Swith
proportions) according to your video signal type
or preference. Choices are 16: 9/4: 3/Just Scan
/Zoom1/ Zoom2.(Note: Some options may not
be available under some sources.)
Screen (May not be available): Select
PC-VGA source, in picture settings select screen,
you can set below items.
-Auto Adjust: Adjust the screen automatically.
-H. Position: Adjust the horizontal position.
-V. Position: Adjust the vertical position.
-Size: Adjust the size.
-Phase: Adjust the phase.
Time Zone
Auto Sync
Clock
Summer Time
Sleep Timer
Auto Sleep
Time Zone
Auto Sync
Clock
Summer Time
Sleep Timer
Auto Sleep
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Signal Information
CI Information
5V antenna power
AD Swith(Only available in DTV mode):
Turn on the Audio description, you can
activate the setting of AD volume.When turn
on the audio description, a narrator will
describe what is happening on the screen for
blind or visually impaired viewers.
Auto Tuning: Select DVB-T or DVB-C and
press ENTER button to access next step, then
Advanced Tuning: Access the satellite
settings essential for searching programs
through DVB-S source.
ATV Manual Tuning
First select the
source type of ATV. Then in Channel menu,
select ATV Manual Tuning and press
ENTER button to access.
Program Edit
Edit the programs. You can
press color buttons on the remote control to
skip programs, rename and delete programs
or move programs, and add programs to the
favorite list by pressing FAV button.
Signal Information
Showing the information
of current DTV channel.
CI Information Enables the user to select
from the CAM-provided menu. Select the CI
menu based on the menu PC Card.
5V Antenna Power
This option is only
available in DVB-T source, select On to supply
power for the TV’s antenna; Select Off to turn
off this function.
Software Update (OAD) (Only for
some regions)
Select On to allow the TV to
update the system software over the air. Select
Off will turn off this function.
OAD Tuning (Only for some regions)
When software update (OAD) is off, this
option is disable. Select OAD scan mean
that go toscan channel to find the OAD
update information.
DTV Manual Tuning: Search and store
programs manually.
Channel DTV Manual Tuning
Select the source type(DVB-T or DVB-C) and
search digital programs manually. In Channel
menu, select DTV Manual Tuning and press
ENTER button to access.
Satellite Dish Settings
search and store programs automatically. If you
want to stop the auto search, press MENU
button or EXIT button, a exiting dialog is
popped out.
Turns on the Sound
Retrieval System.
Surround Sound:
channel list is sorted according to the default
order.
OSD Language
Audio Languages
Subtitle Languages
TTX Language
TIME
HDMI CEC
PVR File System
Restore Default
SW Update(USB)
OSD Language Select the OSD language.
Audio Languages /Subtitle Languags
(Note1)
Select as your desire.
TTX Language
Select TTX language for
different regions.
Time
Can setup Auto Sync, Clock, Time
Zone, Summer Time, Sleep Timer and Auto
Sleep.
HDMI CEC Press to enter into submenus.
HDMI CEC - Turn on or off HDMI CEC function.
Auto Standby - Turn the TV to standby
automatically.Device List - When HDMI CEC is
on, you check the device list of connecting to
the TV.
PVR File System(Note1)
Personal Video
Record setting. If you want to use this function,
you must have received a digital program and
connected a USB disk.
Restore Default
Restore user setting to
the default.
Software Update (USB)
Connect a USB
device with upgrading software to upgrade
the TV system.
LOCK System
Set Password
Block Program
Parental Guidance
Lock system Input the initial password
(0000) to access this feature, select “on”, the
following feature such as “Set password”,
“Block program” and “Parental guidance” will be
activated; select “off”, the above mentioned
three features will be inactivated. If you forget
the password, you can also input the super
password (8899) to enter into the lock system.
Set Password
Reset the password.
Block Program
Set the blocked
programmers as your desire.
Parental Guidance Set it to guide the
programs for children to watch.
LCN ON/OFF (Only for some regions)
When tuning programs, select ON, the channel
list is sorted according to LCN; select OFF,the
Operation
12
12
Operation
forward the recording.
Please note the following about PVR:
USB storage device must have the
capacity of at least 512 MB and support the
USB 2.0 standard. Some non-standard storage
devices may not be supported
Try formatting the inserted storage device
when you have trouble recording.
Do not disconnect the device while the
formatting is in progress. When you format
the device, all data on it is deleted. It may
be advisable to back up your files before
formatting.
If the USB storage device has several
partitions, the PVR system can record the data
on any one of them.
Electronic Program Guide (EPG) and
Time Shift
Press EPG button to display the Programme
Guide menu. This function gives you the
detailed information of the channel, indicating
the time of the program playing. From the
Programme Guide it is possible to check
the program information for the next eight
days (If the information is available from the
broadcaster). Press MENU/EXIT button to quit.
Time shift is a feature enabling you to record
a TV program while you are away to watch it
later at convenient time.
Record: Press Red button to set the
parameters of recording, The unit is able to
do schedule recording when TV is turning on
or in standby mode. You can set up several
schedule recording. Different schedules should
not overlap. When recording starts in standby
mode, the front indicators will change color and
there will be no picture or sound from the unit.
You can press the POWER button to light up
the screen.
Info: Press Green button to see the
detailed information of the current channel.
Schedule: Press Yellow button to display
the schedule list.
Remind: If you find the desired program
which will be shown in the future. Press Blue
button to book program.
CI Information
This function enables you to watch some
encrypted services (pay services). Please
insert a CI card into the PCMCIA slot according
to the arrow on the CI card.
The function can only be available
when CI card is present.
It is possible for you to change CI
(Common Interface) menu screen and service
by consulting your dealer.
Please do not insert or pull out the CI card
when power on. During initialization of the CI
card, please don’t operate the TV.
Do not insert or pull out the CI card
frequently so as to avoid any damages of the
TV and the CI card.
If there is no picture and/or sound with the
CI+ CAM module inserted, please contact the
customer support of the service provider.
USB operation
General playback information
Insert a USB drive into the USB port.
Select USB as the source. The screen will
show a USB playback window, in which you
can select Video, Music, Photo and Text
modes by pressing LEFT/RIGHT cursor
buttons and OK button.
USB file systems supported: FAT16, FAT32
; maximum capacity 1 TB. For correct and
satisfactory operation, licensed USB devices of
well-known brands should be used. Avoid using
USB devices of unknown brands. Playback of
some file formats cannot be supported.
This unit supports playback of video files
with ASF, AVI, MKV, MPG extension, with
video codecs WMV9, H263, MPEG-4,
MPEGII, XVID and audio codecs WMA, MP3,
DD(AC3).
The above list of extensions and codecs
is for information only and is not a guarantee
that all files having the above extensions and
codecs sohuld be read by this unit.
Operation
13
13
Operation
Some AVI files cannot be played due to
their parameters and recording conditions.
Video files with AVI extension exceeding 2 GB
in size may be played partially.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warranty cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
General operations of file playback
Press cursor buttons to select Return
option and press ENTER button if you want to
go back to the previous menu.
In the content menu, press cursor buttons
to select folder, press ENTER button to enter it,
then press cursor buttons to select the file you
want to watch or to listen to. When highlighting
the file, the file information will appear on the
right and picture will be previewed in the center
(not available for music files). Press ENTER
button or button to play the selected file.
While playback, press INFO button; the
bottom of the screen will show playback menu
in which you can select an operation by LEFT/
RIGHT cursor buttons on perform this opera-
tion by pressing ENTER button.
While playback, press button to pause
or resume playback. Press button to stop
playback.
When you select a file to play, you can
delete the selected file by pressing Red button
on the RC.
When playing music files you can press
/ buttons to fast reverse or forward. You can
press / buttons to select the desired files
manually in normal condition.
When playing photo files, you can press
/ buttons to page up or page down the
file. Press LEFT/RIGHT cursor buttons to
rotate the image.
Press RETURN button to stop playback
and return to the previous menu screen.
General Information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom Cause Solution
No picture, no
sound, and no
indicator light
The power cord is not plugged in.
Contrast, brightness, color and
volume are all in the minimum value
or TV is in mute mode.
Plug the power cord in.
Alter the value of contrast,
brightness, color and volume.
Picture and
sound with
abnormity
Contrast and color are set improperly.
Color system is set improperly.
Sound system is set improperly.
Set the value of Contrast and color
properly.
Set the sound system properly.
The picture in
VGA mode is
abnormal
The PC settings may be improper. Check and set the resolution
parameters of your PC.
Picture is spotted
or with snow
Signal source is low-grade or the
signal is in a lower quality.
Use the qualified signal cord.
Blue background No video signal or the signal cord is
improperly/not connected.
Connect the signal cord properly.
No sound No audio signal or the signal cord is
improperly/not connected.
Connect the audio signal cord
properly.
Set the sound system properly.
The RC does not
work
Batteries are improperly installed or
exhausted.
Make sure the positive and the
negative polarities are correct.
Reattach the battery lid.
Replace the batteries.
Causes of interference
Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.
Local radiation however, can create disturbances, which visibly affect your picture. Proper
installations, a good aerial are your best safeguards against these disturbances.
RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or
receiving short-wave radio equipment.
DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of
diathermy equipment from a nearby doctor’s surgery or hospital.
SNOW: Weak TV signals from long distant stations result in an instead picture and give the
effect of falling snow. An antenna adjustment or antenna amplifier may be needed.
GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,
hills, aircraft, etc. is minimized by correct aerial positioning.
CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture
or make the picture roll.
General Information
14
General information
16
14
General information
Содержание
17
15
Содержание
Уважаемый покупатель!
Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-
пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить
настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте
руководство для использования в будущем.
Содержание
Перед началом эксплуатации
Утилизация изделия
Меры предосторожности
Установка
Установка на подставку
Крепление на стену
Подключение
Подключение внешней антенны
Прочие подключения
Управление устройством
Элементы управления
Передняя панель
Задняя панель
Пульт дистанционного управления
Установка батареек
Общие операции
Источники сигнала
Операции с телетекстом
Экранное меню
Изображение
Звук
Время
Канал
Опции
Блок
Запись цифровых программ (PVR)
Электронный телегид (EPG)/TimeShift
Интерфейс CI
Операции с USB
Общая информация
Воспроизведение файлов
Общая информация
Руководство по устранению
неисправностей
Источники помех
Комплект поставки
Технические характеристики
17
18
18
18
20
20
20
21
21
21
22
22
22
22
23
24
24
24
24
25
25
25
26
26
27
27
28
28
28
29
29
29
31
31
31
32
32
Перед началом эксплуатации
18
16
Перед началом эксплуатации
Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с
обычным бытовым мусором. Существует отдельная система сбора использованных
электронных изделий в соответствии с законодательством, которая предполагает
соответствующее обращение, возврат и переработку.
Обращайтесь в органы местного управления за инструкциями по правильной ути-
лизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с соблю-
дением обязательных процедур по обработке, утилизации и вторичной переработке
и, таким образом, предотвратите потенциальное негативное воздействие на окружа-
ющую среду и здоровье людей.
Утилизация изделия
Меры предосторожности
Пожалуйста, извлеките шнур пита-
ния из розетки и свяжитесь с сервисной
службой в следующих случаях: если в
устройстве имеются явные неисправности,
например, из него идет дым, чувствуется
специфический запах или слышен неха-
рактерный звук; если внутрь устройства
попала жидкость или посторонние предме-
ты; если нет изображения или звука; если
поврежден корпус или панель; если Вы
пользуетесь устройством согласно инструк-
ции, но оно не работает должным образом.
Данное изделие может подключаться
к розетке питания как без заземляющего
третьего контакта, так и с заземляющим
третьим контактом.
Во избежание поражения электричес-
ким током защищайте шнур питания от
возможного нажатия на него или защемле-
ния, особенно рядом с разъемами.
Не закрепляйте шнур питания метизами.
Если Вы не пользуетесь устройством
длительное время или в случае грозы
обязательно отключайте шнур питания из
розетки, а также отключайте все сигналь-
ные кабели от входных разъемов.
При отключении вилки из розетки всег-
да держитесь за утолщение на вилке, не
касайтесь металлических частей, не тяните
за шнур и не ломайте и не перегибайте его,
не ремонтируйте, не перекручивайте и не
нагревайте.
Немедленно свяжитесь с сервисным
центром, в случае если имеются какие-либо
неисправности шнура питания, в нем оголи-
лись жилы или он поврежден.
Замените сетевую розетку, если в
нее невозможно вставить вилку или вилка
плохо закрепляется в розетке. Иначе могут
возникнуть неисправности или произойти
несчастные случаи или возгорания.
Не прикасайтесь к проводам мокрыми
руками.
Запрещается использование розетки, в
которую подключено несколько устройств.
Перегрузка такой розетки может привести
к пожару.
Место подключения вилки шнура
питания к сети 220 В должно оставаться
легкодоступным.
Перед работой с устройством необ-
ходимо полностью прочитать и понять все
инструкции. Необходимо соблюдать все пре-
дупреждения и следовать всем инструкциям,
приведенным в настоящем руководстве.
Пожалуйста, используйте только реко-
мендованные производителем аксессуары.
Перед началом эксплуатации
19
17
Перед началом эксплуатации
Использование других аксессуаров может
привести к неисправностям.
Пожалуйста, проводите все настройки
и регулировки только с помощью кнопок
на передней и боковой панелях или на
пульте дистанционного управления. Ни в
коем случае не снимайте заднюю панель
и не пытайтесь самостоятельно проводить
техническое обслуживание устройства,
так как существует опасность поражения
электрическим током, а также возможно
возникновение неисправностей.
Не устанавливайте устройство на
непрочные или неровные поверхности,
тележки, стойки, треноги, кронштейны или
столы. Устройство может упасть, в резуль-
тате чего могут возникнуть неисправности
или произойти несчастные случаи. Исполь-
зуйте только те приспособления, которые
рекомендованы производителем или
продавцом.
Пожалуйста, устанавливайте устройс-
тво на горизонтальной поверхности в мес-
тах с хорошей вентиляцией. Не допускайте
воздействия на устройство вибрации, пря-
мого солнечного света, высокой температу-
ры, а также попадания пыли и влаги.
Не ставьте на устройство вазы, сосуды
с жидкостью. Попадание жидкости внутрь
аппарата может привести к пожару или
поломке устройства.
Не устанавливайте устройство в зоне
магнитных волн. Это может привести к
поломке устройства. В зоне электромаг-
нитного излучения может наблюдаться
искажение изображения.
Не устанавливайте вблизи устройства
источники открытого огня, например, свечи.
В случае их падения устройство может быть
повреждено или может произойти возгора-
ние.
Установка телевизора в замкнутое
пространство при эксплуатации может
сократить срок службы устройства; поэтому
необходимо обеспечить минимальную
дистанцию между LCD-телевизором и
внутренними границами приспособления
под аппарат для нормальной вентиляции
(минимум по 10 см свободного пространс-
тва со всех сторон).
Располагайте кабели позади устройс-
тва. Не закрепляйте их метизами, не пере-
гибайте, не ремонтируйте и не нагревайте.
При перемещении телевизора не нажи-
майте и не касайтесь панели. Не перено-
сите телевизор в положении, при котором
экран направлен вверх или вниз.
Не перемещайте устройство при
подключенном проводе питания или других
подключенных проводах. Повреждение про-
вода питания, подключенный провод или
подключенные устройства могут стать при-
чиной пожара, электрошока или поломки.
Если устройство тяжелее 18 кг, его
должны перемещать не менее 2 человек.
При падении устройство может повредиться.
Слишком сильное нажатие на панель
может повредить устройство.
При длительном использовании может
немного повыситься температура корпуса
устройства. Это явление свидетельствует о
теплоотдаче в нормальном рабочем режи-
ме. Однако не позволяйте детям и людям с
повышенной температурной чувствитель-
ностью касаться устройства.
Все иллюстрации, приведенные в
настоящем руководстве, являются схе-
матическими изображениями, которые
могут отличаться от реальных объектов.
Перед началом эксплуатации
20
18
Установка/Подключение
Установка
Установка на подставку
Выберите ровную плоскую горизонталь-
ную поверхность, накройте ее мягкой тка-
нью и разместите на ней корпус
телевизора экраном вниз. Cовместите
отверстия на подставках с отверстиями на
задней части корпуса телевизора и
зафиксируйте с помощью двух винтов
4X14.
Крепление на стену
Для крепления на стену на задней пане-
ли телевизора имеются 4 отверстия (дис-
танция 200*100 мм). Для крепления следует
испо
льзовать настенный кронштейн стан-
дарта VESA (в комплект поставки не входит
и приобретается отдельно).
Из-за особенностей конструкции, крепле-
ние на стену не рекомендуется осущест-
влять с помощью поворотных и наклонных
кронштейнов. Такое крепление может быть
ненадежным.
Производитель не несет ответственности
за неправильно выполненный монтаж, по-
влекший повреждение телевизора.
ПРЕДУПРЕЖДЕНИЕ
Во избежание повреждений надежно
закрепите аппарат на стене в
соответствии с требованиями
инструкции по установке.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

Telefunken TF-LED32S21T2 Руководство пользователя

Категория
ЖК-телевизоры
Тип
Руководство пользователя

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

на других языках