Sony KV-AZ21M91 Руководство пользователя

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

Trinitron Color TV

KV-AZ21

2-649-680-11 (3)

M91

Operating Instructions

• Before operating the unit, please read this manual thoroughly and retain

it for future reference.

Инструкция по эксплуатации

• Перед работой с устройством внимательно прочтайте инструкцию

и сохраните её для дальнейшего использования.

GB

RU

01GB01COV-SOEMRus.p65 8/26/05, 3:51 PM1

Black

2

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

Clean the TV with a dry and soft

cloth. Do not use benzine, thinner,

or any other chemicals to clean the

TV. Do not attach anything (e.g.,

adhesive tape, cellophane tape,

glue) on the painted cabinet of the

TV. Do not scratch the picture

tube.

WARNING

• Dangerously high voltages are present inside the TV.

• TV operating voltage: 110 – 240 V AC.

• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through the antenna

and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries from the

remote if you are not going to use it for several days. If any liquid leaks from the

batteries and touches your skin, immediately wash it away with water.

Install the TV on a stable TV stand

and floor which can support the

TV set weight. Ensure that the TV

stand surface is flat and its area is

larger than the bottom area of the

TV.

Do not plug in too many

appliances to the same power

socket. Do not damage the power

cord.

For children’s safety, do not leave

children alone with the TV. Do not

allow children to climb onto it.

For your own safety, do not touch

any part of the TV, the power cord

and the antenna cable during

lightning storms.

Do not place any objects on the TV.

The apparatus shall not be

exposed to dripping or splashing

and that no objects filled with

liquids, such as vases, shall be

placed on the apparatus.

Do not operate the TV if any liquid

or solid object falls into it. Have it

checked immediately by qualified

personnel only.

Do not block the ventilation

openings of the TV. Do not install

the TV in a confined space, such

as a bookcase or built-in cabinet.

Do not open the cabinet and the

rear cover of the TV as high

voltages and other hazards are

present inside the TV. Refer

servicing and disposal of the TV

to qualified personnel.

Pull the power cord out by the

plug. Do not pull the power cord

itself. Even if your TV is turned

off, it is still connected to the AC

power source (mains) as long as

the power cord is plugged in.

Unplug the TV before moving it

or if you are not going to use it for

several days.

To prevent fire or shock hazard, do

not expose the TV to rain or

moisture.

Your TV is recommended for

home use only. Do not use the TV

in any vehicle or where it may be

subject to excessive dust, heat,

moisture or vibrations.

01GB02WAR-SOEMRus.p65 8/26/05, 3:55 PM2

Black

3

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

Securing the TV .............................................................................................................. 4

Getting Started ............................................................................................................... 4

Setting up your TV (“Initial Setup”) ........................................................................... 5

TV top control, front and rear panels ......................................................................... 7

Connecting optional components ............................................................................... 8

Using the remote control and basic functions ......................................................... 10

Introducing the WEGA GATE navigator ................................................................. 12

“Settings” Adjustment ................................................................................................ 13

Changing the “Picture” setting.................................................................................. 14

Changing the “Sound” setting................................................................................... 15

Changing the “Channel Setup” setting .................................................................... 16

Changing the “Setup” setting .................................................................................... 18

Viewing Teletext........................................................................................................... 19

Enjoying stereo or bilingual programs ..................................................................... 20

Listening to the FM Radio .......................................................................................... 21

Troubleshooting ........................................................................................................... 22

Specifications ................................................................................................................ 24

Table of Contents

GBGBGB

Made in Malaysia.

Sony Corporation

6-7-35 Kitashinagawa,

Shinagawa-ku, Tokyo, 141-0001 Japan.

01GB03TOC-SOEMRus.p65 8/26/05, 3:56 PM3

Black

4

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x Securing the TV

To prevent the TV from falling, use the supplied screws, clamps and band to

secure the TV. Use only the supplied screws. Use of other screws may damage

the TV.

or

Screw the band to the TV stand and

to the provided hole at the rear of

your TV.

(1) Put a cord or chain through the

clamps.

(2)

Screw one clamp to a wall or pillar

and the other clamp to the provided

hole at the rear of your TV.

b

Insert the batteries (supplied) into the remote.

Note

•Do not use old or different types of batteries together.

Connect the antenna cable (not supplied) to 8 (antenna

input) at the rear of the TV.

Tips

•Your TV can receive both TV and FM radio signals from the appropriate

connections through the 8 (antenna input) terminal (see page 8).

•You can also connect your TV to other optional components (see page 8).

Plug in the power cord, then press ! on the TV to turn it on.

Note

•The 1 (standby) indicator flashes green for a few seconds when

turning on the TV. This does not indicate a malfunction.

Set up the TV by following the instructions of the

“Начальная настройкa” (“Initial Setup”) menu (see page 5).

x Getting Started

Step 1

Step 2

Step 3

20 mm

3.8 mm

screws

clamps band

Step 4

01GB04INS-SOEMRus.p65 8/26/05, 3:57 PM4

Black

5

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

Program Sorting/Edit

01

02

03

04

Off

Sorting mode

PROG

SkipLabel

Off01

Exit

Select

Confirm

x

Setting up your TV (“Initial Setup”)

When you turn on your TV for the first time, the “Начальная настройкa”

(“Initial Setup”) menu will appear. You may change the menu language, preset

the TV channels automatically, sort or edit the channels and adjust the picture

position using the buttons on the remote control or TV top control panel.

1

Press V or v to select the desired menu

language, then press .

The selected menu language appears.

2

Press V or v to select “Yes”, then press to

preset the channels automatically.

The screen will indicate automatic

presetting is in progress.

After all available channels have been tuned

and stored, the “Program Sorting/Edit”

menu appears automatically on the screen.

To skip automatic channel presetting, select

“No”, then press

.

If the message “No channel found. Please

connect cable/antenna” appears, check your

TV connections, then press

.

3

The “Program Sorting/Edit” menu enables

you to sort and edit the channels.

a) If you wish to keep the channels in the current

condition, press WEGA GATE to exit.

b) Press V or v to select the program

number with the channel you wish to

change. The selected channel will appear

on the screen.

c) If you wish to store the channels in a

different order:

1) Press b to enter sorting mode.

2) Press V or v to select the new program

number position for your selected

channel, then press B.

End

Select

Confirm

End

Select

Confirm

Program:

TV System: Auto

01

VHF Low

End

continue

Program Sorting/Edit

01

02

03

04

Off

Sorting:

Edit:

PROG

SkipLabel

Exit

Select

Confirm

01GB04INS-SOEMRus.p65 8/26/05, 3:57 PM5

Black

6

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

End

Select

Confirm

Picture Rotation

d) If you wish to edit the channels, press

to change to edit mode.

Press b until the mode that you wish to edit

is highlighted: Label, Skip,

(block symbol).

Then press

.

1) To label, press V or v to select the

alphanumeric characters for the label.

Then press

.

2) To skip the program number, press V or v to

select “On”. Then press

.

You can skip this program number when

using PROG +/-.

3) To block unwanted program number,

press V or v to select

. Then press .

e) Repeat step b) to d) if you wish to change other

channels.

Press WEGA GATE to go to the next menu.

4

Press B or b to adjust the bars on the top

and bottom of the menu if they are

slanted, then press

.

If no adjustment is necessary, then press

.

5

To prevent this “Initial Setup” menu from

appearing again when you turn on the TV

by pressing !, press V or v to select “No”,

then press

.

To allow this menu to appear again, select

“Yes”, then press

.

Tip

• You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.

Select

Confirm

Exit

Select

Confirm

Exit

Select

Confirm

Exit

Select

Confirm

Setting up your TV (“Initial Setup”) (continued)

01GB04INS-SOEMRus.p65 8/26/05, 3:57 PM6

Black

7

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

WEGA GATE

PROG

FM

0

9

8

6

7

L

R

2

(MONO)

4

(

R

L

Y

C

B

C

R

MONO)

qa

(

L

R

1

MONO)

13

L

R

2

5

(MONO)

qf qsqd

2

TV front panel

TV rear panel

x TV top control, front and rear

panels

TV top control panel

Button/Terminal Function Page

1 ! Turn off or turn on the TV. 4

2 Remote control sensor. -

3 Wake Up indicator. 11

3 1 Standby indicator. 4

4 i Headphone jack. -

5 t2 Video input terminal 2. 8

6 PROG +/– Select program number. -

7 2 +/– Adjust volume. -

8 t Select TV or video input. 8

WEGA GATE menu operations

6,7 V,v,B,b Select and adjust items. 12

8

Confirm selected items. 12

9 WEGA GATE Display or cancel WEGA GATE menu. 12

0 FM Listen to FM radio. 21

qa 8 Antenna input terminal. 8

qs T Monitor output terminal. 9

qd Component video input terminal. 9

qf t1 Video input terminal 1. 8

01GB05AVD-SOEMRus.p65 8/26/05, 3:58 PM7

Black

8

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

L

R

(MONO)

2

(

R

L

Y

C

B

C

R

MONO)

(

L

R

1

MONO)

x Connecting optional components

Connecting to the video input terminal ( t )

Notes

• If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the

program number 0 on the TV (see page 17).

• When both (S video) and (video) for t 1 are connected at the same time,

(S video) is automatically selected. To view (video), disconnect the S video cable.

TV front panel

Antenna cable

(not supplied)

DVD player

TV rear panel

Audio/Video

cable

(not supplied)

Audio/

Video cable

(not supplied)

Camcorder

S Video cable

(not supplied)

Antenna cable

(not supplied)

TV, CATV, Satellite

or

When there is no

FM signal

Antenna

selector

FM signal

TV signal

VCR

01GB05AVD-SOEMRus.p65 8/26/05, 3:58 PM8

Black

9

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

(

R

L

Y

C

B

C

R

MONO)

(

L

R

1

MONO)

DVD player

TV rear panel

Component video

cable

(not supplied)

Audio cable

(not supplied)

Connecting to the component video input terminal ( )

Notes

• If your DVD player can output interlace and progressive mode signals, select the interlace

output when connecting to (component video input) on your TV. Your TV can receive

either 525i/60Hz or 625i/50Hz interlace signals.

• The component video terminals on your DVD player are sometimes labeled Y/CB/CR, Y/PB/

PR, Y/Cb/Cr or Y/B-Y/R-Y.

• If you select “DVD” on your TV screen, the signal from the T (monitor output) jacks will not

be output properly. This does not indicate a malfunction.

TV rear panel

Audio system

VCR

Audio/Video

cable

(not supplied)

Connecting to the monitor output terminal ( T )

(

L

MONO)

R

Y

C

B

C

R

(

L

R

1

MONO)

01GB05AVD-SOEMRus.p65 8/26/05, 3:58 PM9

Black

10

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x Using the remote control and basic

functions

TV

1

2

3

4

6

7

8

9

0

5

PROG

A/B

1

2

3

7

4

5

qj

qa

qd

qf

qh

WEGA

GATE

6

8

9

0

w;

ql

qg

qs

RETURN

qk

Button Description Page

1 ?/1 Turn off temporarily or turn on –

the TV.

2 a Display the TV program. –

3 Jump to last program number –

that has been watched for at

least five seconds.

4 PROG +/– Select program number.

–

5 2 +/– Adjust volume. –

8 Change the picture size: –

“On” (16:9 wide-mode), “Off”.

9 Select surround mode options: 15

“TruSurround”, “WOW”,

“Simulated”, “Off”.

0 Display on-screen information. –

qa Mute the sound. –

qd t Select TV or video input. 8

qf 0 – 9 Input numbers. For program –

numbers 10 and above, enter the

second digit within two seconds.

ql Select sound mode options 15

with a 5-Band Graphic

Equalizer display:

“Dynamic”, “Standard”,

“Custom”*.

* When the “Custom” mode is

selected, you can receive the

last adjusted sound settings

from the “Sound Adjustment”

option in the menu.

w;

Select picture mode options: 14

“Vivid”, “Standard”, “Custom”*.

*

When the “Custom” mode is

selected, you can receive the

last adjusted picture settings

from the “Picture Adjustment”

option in the menu.

Dynamic

100 300 1k 3k 8k

Custom

100 300 1k 3k 8k

Standard

01GB05AVD-SOEMRus.p65 8/26/05, 3:58 PM10

Black

11

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

Button Description Page

WEGA GATE menu operations

6 Confirm selected items. 12

7 WEGA GATE Display or cancel WEGA GATE menu.

qj V, v, B, b Select and adjust items.

qk RETURN Return to the previous level.

Timer operations

qg Set TV to turn on automatically according to the –

desired period of time (max. of 12 hours).

The indicator on TV lights up amber once you set

the wake up timer.

If no buttons or controls are pressed for more than one

hour after the TV is turned on using the wake up timer,

the TV automatically goes into standby mode.

qh Set TV to turn off automatically according to the –

desired period of time (max. of one hour and 30 min.).

Teletext operations (green label)

, , , , All buttons are used for Teletext operations. 19

, , , ,

(red, green,

yellow, blue)

PIP operations

, , V, v, B, b Not function for your TV.

–

Stereo/bilingual operations

qs A/B Select stereo/bilingual mode. 20

(Wake Up Timer)

(Sleep Timer)

WOW, TruSurround, SRS and symbol are trademarks of SRS Labs, Inc. WOW

and TruSurround technologies are incorporated under license from SRS Labs, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 4482866.

“BBE” and BBE symbol are trademarks of BBE Sound, Inc.

01GB05AVD-SOEMRus.p65 8/26/05, 3:58 PM11

Black

12

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x Introducing the WEGA GATE

navigator

WEGA GATE is a gateway that allows you access to preset TV channels,

connected external inputs, FM Radio mode and “Settings” menu.

watch the preset TV

channels (see page 5)

select the inputs for the

connected equipment

(see page 8)

change the settings

of your TV

(see page 13)

How to use WEGA GATE

(1) Press WEGA GATE to display or cancel

the WEGA GATE menu.

Confirm

Select

WEGA GATE

Settings

External Inputs

TV

FM Radio

(3) Press V or v to select the desired item.

(4) Press RETURN to move to the previous

level.

(2) Press (or b) to confirm your selection

or go to the next level.

“TV”

“External Inputs”

“Settings”

Confirm

Select

WEGA GATE

Settings

External Inputs

TV

FM Radio

01

02

03

04

05

TV

Confirm

Select

End

01

02

03

04

05

TV

Confirm

Select

End

Tip

• The WEGA GATE, and V,v,B,b buttons on the top control panel can also be used for the

operations above.

“FM Radio”

Listen to the FM Radio

(see page 21)

01

02

03

04

05

TV

Confirm

Select

End

Preset 1:

---.--

Please setup FM Radio

FM Radio

Select Preset 1-9

Search

Exit

External Inputs

Confirm

Select

End

Video 1

1

2

DVD

Video 2

Confirm

End

Picture

Color Temperature: Cool

Picture Adjustment

Picture Mode: Vivid

VM: High

Intelligent Picture: On

Confirm

Select

WEGA GATE

Settings

External Inputs

FM Radio

TV

Select

Fine

01GB06ADJ-SOEMRus.p65 8/26/05, 3:59 PM12

Black

13

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x “Settings” Adjustment

You are able to change the settings of your TV from “Settings” in

WEGA GATE menu.

Press WEGA GATE button to display WEGA GATE menu. Press V or v to select

“Settings” and press

.

The following is an overview of the items that can be adjusted.

Confirm

End

Picture

Color Temperature: Cool

Picture Adjustment

Picture Mode: Vivid

VM: High

Intelligent Picture:

On

Select

“Picture” (see page 14)

“Picture Mode”: “Vivid” “Standard” “Custom”

“Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”,

“Sharpness”, “Reset”

“Color Temperature”: “Cool” “Neutral” “Warm”

“VM”: “High” “Low” “Off”

“Intelligent Picture”: “On” “Off”

Confirm

End

Sound

Sound Adjustment

Sound Mode: Dynamic

Select

Balance

Intelligent Volume:

Surround: Off

Off

“Sound” (see page 15)

“Sound Mode”: “Dynamic” “Standard” “Custom”

“Sound Adjustment”: “Adjust”, “Reset”

“Balance”

“Intelligent Volume”: “On” “Off”

“Surround”: “TruSurround” “WOW” “Simulated”

“Off”

Confirm

End

Channel Setup

Select

Manual Program

Auto Program

Program Sorting/Edit

FM Radio Setup

“Channel Setup” (see page 16)

“Auto Program”

“Manual Program”

“Program”: “00” - “99”

“TV System”: “B/G” “I” “D/K” “M”

“VHF Low”/“VHF High”/“UHF”

“Fine”: “Auto” “Manual”

“Signal Booster”: “Auto” “Off”

“Program Sorting/Edit”

“FM Radio Setup”

Confirm

End

Setup

Select

Picture Rotation

Language:

Video Label

Color System:

Wake Up Timer Beep:

Auto

Factory Settings

On

English

“Setup” (see page 18)

“Language”: “English” “ ” (Russian)

“Picture Rotation”

“Video Label”: “Video Input”, “Label”

“Color System”: “Auto” “PAL” “SECAM” “NTSC3.58”

“NTSC4.43”

“Wake Up Timer Beep”: “On” “Off”

“Factory Settings”: “Yes” “No”

Note

• When a feature is dimmed in the menu, it is not selectable.

01GB06ADJ-SOEMRus.p65 8/26/05, 3:59 PM13

Black

14

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x Changing the “Picture” setting

The “Picture” menu allows you to adjust the picture settings.

1

Press WEGA GATE and select “Settings”.

2

Make sure the “Picture” icon ( ) is selected, then press .

3

Press V or v to select the desired item (e.g., “Picture Mode”), then press .

Select To

“Picture Mode” choose either “Vivid” (contrast and sharp), “Standard”

(normal) or “Custom”*.

“Color Temperature” adjust white color tint.

Choose either “Cool” (blue tint), “Neutral” (neutral tint) or

“Warm” (red tint).

“VM” sharpen the edges of each object.

(Velocity Modulation) Choose either “High”, “Low” or “Off”.

“Intelligent Picture” optimize picture quality.

Press V or v to select “On”, then press .

To cancel, select “Off”, then press .

* You can adjust the setting to your personal preference in the “Picture Adjustment”,

“Color Temperature” and “VM” options only when the “Custom” mode is selected.

Adjusting the “Picture Adjustment” items under “Custom”

mode

1

Press V or v to select either “Picture” (contrast), “Brightness”, “Color”,

“Hue” (color tones) or “Sharpness”, then press

.

Selecting “Reset” will set your TV to the factory settings.

2

Press V,v,B or b to adjust the setting of your selected item, then press .

3

Repeat the above steps to adjust other items.

The adjusted settings will be received when you select “Custom”.

Notes

• “Hue” can be adjusted for the NTSC color system only.

• Reducing “Sharpness” can also reduce picture noise.

01GB06ADJ-SOEMRus.p65 8/26/05, 3:59 PM14

Black

15

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x Changing the “Sound” setting

The “Sound” menu allows you to adjust the sound settings.

1

Press WEGA GATE and select “Settings”.

2

Press V or v to select the “Sound” icon ( ), then press .

3

Press V or v to select the desired item (e.g., “Sound Mode”), then press .

Select To

“Sound Mode” choose either “Dynamic” (low and high tones), “Standard”

(voice and high tones) or “Custom”*.

“Balance” Press v or B to emphasize the left speaker.

Press V or b to emphasize the right speaker.

“Intelligent Volume” adjust the volume of all program numbers and video inputs

automatically.

Press V or v to select “On”, then press .

To cancel, select “Off”, then press .

“Surround” choose either “TruSurround”(surround sound

that spreads out to the rear of a room), “WOW”** (full, deep

bass sound), “Simulated” (stereo-like monaural sound) or

“Off”.

* You can adjust the setting to your personal preference in the “Sound Adjustment”

option only when the “Custom” mode is selected.

** BBE High Definition Sound is fully activated maximizing the sound effect in the WOW

mode.

Note

• “Intelligent Volume” is not selectable when “TruSurround” is selected.

Adjusting the “Sound Adjustment” items under “Custom”

mode

The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings

of “Custom” mode in the menu.

1

Make sure that “Adjust” is selected, then press .

Selecting “Reset” will set your TV to the factory settings.

2

Press B or b to select the desired sound frequency, then press V or v to

adjust the setting and press

.

The adjusted settings will be received when you select “Custom”.

Notes

• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency

will affect lower pitched sound.

• You may display the settings directly by using button on the remote control (see page 10).

01GB06ADJ-SOEMRus.p65 8/26/05, 3:59 PM15

Black

16

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x C

hanging the “Channel Setup”

setting

The “Channel Setup” menu allows you to preset channels automatically,

manually preset channels, sort or edit the channels and preset FM Radio

stations.

1

Press WEGA GATE and select “Settings”.

2

Press V or v to select the “Channel Setup” icon ( ), then press .

3

Press V or v to select the desired item (e.g., “Auto Program”), then press .

Select To

“Auto Program” preset channels automatically.

“Manual Program” manually preset desired channels and channels that cannot

be preset automatically (see Presetting channels manually

in page 17

)

.

“Program Sorting/Edit”

change the order in which the channels appear on the screen,

label the program number, skip the program number and

block unwanted programs.

(see step 3 of the section “Initial Setup” in page 5).

“FM Radio Setup”* preset up to nine FM radio stations.

You can manually preset each FM radio station that can be

received in your area and then store the radio frequency of

the desired FM radio stations.

(1) Press

V or v

to select the desired FM radio station

position, then press .

(2) Press

V or v

t

o search the FM radio stations.

Searching stops automatically when a station is tuned in.

If the station has a weak signal, press

B or b

to fine tune

the radio frequency manually, then press to store the

FM radio station.

(3) You may edit the FM radio station label. Press

V or v

to

select alphanumeric characters for the label, then press

.

(4) Repeat steps (1) through (3) to preset other FM radio

stations.

* The “FM Radio Setup” feature is only available in FM

Radio mode. To

enable this feature, access to FM Radio

mode by using WEGA GATE system (see page 12) or

pressing the FM button on the top control panel (see page

7), then preset your desired FM radio stations according to

the steps mentioned above.

Notes

• If you preset a blocked program number, that program number will be unblocked

automatically.

• If you sort a blocked program, that program will remain blocked.

01GB07ADV-SOEMRus.p65 8/26/05, 4:01 PM16

Black

17

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

01

D/K

Presetting channels manually

1

After selecting “Manual Program”, select the program

number to which you want to preset a channel.

(1) Make sure “Program” is selected, then press

.

(2) Press V or v

until the program number you want

to preset appears on the menu, then press

.

2

Select the desired channel.

(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press

.

(2) Press V or v until the desired channel’s broadcast appears on the TV screen,

then press .

3

If the sound of the desired channel is abnormal, select the appropriate TV

system.

(1) Press V or v

to select “TV System”, then press .

(2) Press V or v

until the sound becomes normal, then press .

4

If you are not satisfied with the picture and sound quality, you may be able

to improve them by using the “Fine” tuning feature.

(1) Press V or v

to select “Fine”, then press .

(2) Press V or v

to select “Manual”, then press .

(3)

Press V,v,B or b until the picture and sound quality are optimal, then press .

The + or – icon on the menu flashes while tuning.

5

If the TV signal is too strong (picture distorted; picture with lines; signal

interference) or weak (snowy picture), you may be able to improve the

picture quality by setting the “Signal Booster” feature.

(1) Press V or v

to select “Signal Booster”, then press .

(2) Press V or v

to select either “Off” (for picture distorted; picture with lines;

signal interference) or “Auto” (for snowy picture), then press

.

01GB07ADV-SOEMRus.p65 8/26/05, 4:01 PM17

Black

18

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x C

hanging the “Setup” setting

The “Setup” menu allows you to change the menu language, adjust the picture

position, label the connected equipment, select the color system, set the wake up

timer beep and reset your TV to factory settings.

1

Press WEGA GATE and select “Settings”.

2

Press V or v to select the “Setup” icon ( ), then press .

3

Press V or v to select the desired item (e.g., “Language”), then press .

Select To

“Language” change the menu language.

Press V or v to select either “English” or “ ” (Russian),

then press .

“Picture Rotation” adjust the picture position when it is not aligned with the TV

screen.

Press B or b to adjust the picture position, then press .

“Video Label” label the connected equipment.

(1) Select “Video Input” and press . Press V or v to select the

input you want to label, then press .

(2) Select “Label” and press , then press V or v to select

the label options: “Video 1”/“Video 2”/“DVD”, “VCR”,

“SAT”, “Game” or “Edit”*.

* You may edit the video label to your favorite name. Press V or v

to select alphanumeric characters for the label, then press .

“Color System” select the color system.

Press V or v to select either “Auto”, “PAL”, “SECAM”,

“NTSC3.58” or “NTSC4.43”, then press . Normally, set this to

“Auto”.

“Wake Up Timer

allow your TV to emit beeping sound when TV switches on

Beep

” automatically using wake up timer.

Press V or v to select “On”, then press .

To cancel, select “Off”, then press .

“Factory Settings”

reset your TV to factory settings.

Press and press V or v to select “Yes”, then press .

To cancel, select “No”, then press .

Notes

• Color system is not selectable in FM Radio mode.

• To ensure the beeping sound can be heard, you must set an appropriate volume level on your

TV and make sure the TV is not in mute condition.

• To stop the beeping sound, press any buttons on the remote control or top control panel.

• If no button is pressed for three minutes, the beeping sound will automatically go off.

01GB07ADV-SOEMRus.p65 8/26/05, 4:01 PM18

Black

19

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x Viewing Teletext

Some TV stations broadcast an information service called Teletext which allows

you to receive various information, such as stock market reports and news.

You can use the buttons on the remote to view Teletext.

To Do this

display a Teletext Press . Each time you press , the

page on the screen changes as follows:

TV picture Teletext t Teletext and TV t TV.

If there is no Teletext broadcast, “100” is

displayed at the top left corner of the

screen.

check the contents Press .

of a Teletext service An overview of the Teletext contents,

including page numbers, appears on the

screen.

select a Teletext page Press the number buttons to enter the

three-digit page number of the desired

Teletext page. If you make a mistake,

reenter the correct page number. To

access the next or previous page, press

or .

hold (pause) a Press to display the symbol “ ” at

Teletext display the top left corner of the screen. To

resume normal Teletext viewing, press

.

reveal concealed Press .

information (e.g., To conceal the information, press the

an answer to a quiz) button again.

enlarge the Teletext Press . Each time you press , the

display Teletext display changes as follows:

Enlarge upper half t Enlarge lower

half t Normal size.

stand by for a Teletext (1) Enter the Teletext page number that

page while watching you want to refer to, then press .

a TV program (2) When the page number is displayed,

press to show the text.

select a FASTEXT Press (red, green, yellow and blue)

menu or the colored that corresponds to the desired menu or

boxes page number.

turn off Teletext Press

a

.

Note

• The FASTEXT feature can be used only when the FASTEXT broadcast is available.

(red,

green,

yellow,

blue)

TV

1

2

3

4

6

7

8

9

0

5

PROG

A/B

WEGA

GATE

,

RETURN

01GB07ADV-SOEMRus.p65 8/26/05, 4:01 PM19

Black

20

Sony KV-AZ21M91 Group P7 (GB,RU)_2-649-680-11 (3)

x Enjoying stereo or bilingual

programs

You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo

systems by using the A/B button.

When receiving a NICAM program

Broadcasting On-screen display (Selected sound)

NICAM

stereo

NICAM

bilingual

NICAM

monaural

When receiving an A2 program

Broadcasting On-screen display (Selected sound)

A2

stereo

A2

bilingual

Note

• If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound

becomes monaural but the noise is reduced.

TV

1

2

3

4

6

7

8

9

0

5

PROG

A/B

WEGA

GATE

RETURN

A/B

NICAM

(Stereo sound)

Mono

(Regular sound)

t

NICAM Main

(Main sound)

NICAM Sub

(Sub sound)

Mono

(Regular sound)

tt

t

NICAM Main

(Main sound)

Mono

(Regular sound)

t

Mono

(Regular sound)

Stereo

(Stereo sound)

t

Main

(Main sound)

Sub

(Sub sound)

t

01GB07ADV-SOEMRus.p65 8/26/05, 4:01 PM20

Black

Страница загружается...

Sony KV-AZ21M91, M91 Руководство пользователя

Похожие модели бренда