Yamaha S08 Voice Editor Инструкция по применению

Basics SectionQuick GuideReferenceAppendix

OWNER’S MANUAL

This document is printed on chlorine free (ECF) paper with soy ink.

Yamaha Web Site (English only)

www.yamahasynth.com

Yamaha Manual Library (English versions only)

http://www2.yamaha.co.jp/manual/english/

M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

V881780 202MWCP2.3-01A0

Printed in Japan

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). DO NOT

connect this product to any power supply or adapter other than one

described in the manual, on the name plate, or speciﬁcally recommended by

Yamaha.

WARNING:

Do not place this product in a position where anyone could walk on, trip over

,or roll anything over power or connecting cords of any kind. The use of an

extension cord is not recommended! IF you must use an extension cord, the

minimum wire size for a 25' cord (or less ) is 18 AWG. NOTE: The smaller the

AWG number ,the larger the current handling capacity. For longer extension

cords, consult a local electrician.

This product should be used only with the components supplied or; a cart,

rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please

observe all safety markings and instructions that accompany the accessory

product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the time

of printing. However, Yamaha reserves the right to change or modify any of

the speciﬁcations without notice or obligation to update existing units.

This product, either alone or in combination with an ampliﬁer and headphones

or speaker/s, may be capable of producing sound levels that could cause

permanent hearing loss. DO NOT operate for long periods of time at a high

volume level or at a level that is uncomfortable. If you experience any hearing

loss or ringing in the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory mounting

ﬁxtures that are either supplied with the product or as optional accessories.

Some of these items are designed to be dealer assembled or installed. Please

make sure that benches are stable and any optional ﬁxtures (where

applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No other uses

are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are not

covered by the manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and consult your dealer

before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and

environmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keeping with

both the letter and the spirit of the law, we want you to be aware of the

following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of battery

is approximately ﬁve years. When replacement becomes necessary, contact a

qualiﬁed service representative to perform the replacement.

This product may also use “household” type batteries. Some of these may be

rechargeable. Make sure that the battery being charged is a rechargeable

type and that the charger is intended for the battery being charged.

When installing batteries, do not mix batteries with new, or with batteries of a

different type. Batteries MUST be installed correctly. Mismatches or incorrect

installation may result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all batteries

away from children. Dispose of used batteries promptly and as regulated by

the laws in your area. Note: Check with any retailer of household type

batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some reason its

useful life is considered to be at an end, please observe all local, state, and

federal regulations that relate to the disposal of products that contain lead,

batteries, plastics, etc. If your dealer is unable to assist you, please contact

Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the rear of the product. The model number,

serial number, power requirements, etc., are located on this plate. You should

record the model number, serial number, and the date of purchase in the

spaces provided below and retain this manual as a permanent record of your

purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (rear)

NEDERLAND / THE NETHERLANDS

• Dit apparaat bevat een lithium batterij voor geheugen back-up.

• This apparatus contains a lithium battery for memory back-up.

• Raadpleeg uw leverancier over de verwijdering van de batterij op het

moment dat u het apparaat ann het einde van de levensduur afdankt of

de volgende Yamaha Service Afdeiing:

Yamaha Music Nederland Service Afdeiing

Kanaalweg 18-G, 3526 KL UTRECHT

Tel. 030-2828425

• For the removal of the battery at the moment of the disposal at the end of

the service life please consult your retailer or Yamaha Service Center as

follows:

Yamaha Music Nederland Service Center

Address: Kanaalweg 18-G, 3526 KL UTRECHT

Tel: 030-2828425

• Gooi de batterij niet weg, maar lever hem in als KCA.

• Do not throw away the battery. Instead, hand it in as small chemical

waste.

(lithium disposal)

ADVARSEL!

Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning m*

kun ske med batteri af samme fabrikat og type. Levér det brugte batteri

tilbage til leverandoren.

VARNING

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en

ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt

batteri enligt fabrikantens instruktion.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo

ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävit* käytetty paristo

valmistajan ohjeiden mukaisesti.

(lithium caution)

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modiﬁcations not expressly approved by

Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT:

When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be

used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3. NOTE:

This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference

with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users

manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference

will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please

try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line ﬁlter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not

locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(class B)

(3)-7 1/2

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

• Only use the voltage speciﬁed as correct for the instrument.

The required voltage is printed on the name plate of the

instrument.

• Use the speciﬁed adaptor (PA-5C or an equivalent

recommended by Yamaha) only. Using the wrong adaptor

can result in damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or

dust which may have accumulated on it.

• Do not place the AC adaptor cord near heat sources such

as heaters or radiators, and do not excessively bend or

otherwise damage the cord, place heavy objects on it, or

place it in a position where anyone could walk on, trip over,

or roll anything over it.

• Do not open the instrument or attempt to disassemble the

internal parts or modify them in any way. The instrument

contains no user-serviceable parts. If it should appear to be

malfunctioning, discontinue use immediately and have it

inspected by qualiﬁed Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in

damp or wet conditions, or place containers on it

containing liquids which might spill into any openings.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a ﬁre.

• If the AC adaptor cord or plug becomes frayed or

damaged, or if there is a sudden loss of sound during use

of the instrument, or if any unusual smells or smoke should

appear to be caused by it, immediately turn off the power

switch, disconnect the adaptor plug from the outlet, and

have the instrument inspected by qualiﬁed Yamaha service

personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to

the instrument or other property. These precautions include, but are not limited to, the following:

• When removing the electric plug from the instrument or an

outlet, always hold the plug itself and not the cord.

• Unplug the AC power adaptor when not using the

instrument, or during electrical storms.

• Do not connect the instrument to an electrical outlet using a

multiple-connector. Doing so can result in lower sound

quality, or possibly cause overheating in the outlet.

• Do not expose the instrument to excessive dust or

vibrations, or extreme cold or heat (such as in direct

sunlight, near a heater, or in a car during the day) to prevent

the possibility of panel disﬁguration or damage to the

internal components.

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV, or radio may generate noise.

• Do not place the instrument in an unstable position where it

might accidentally fall over.

• Before moving the instrument, remove all connected

adaptor and other cables.

• Use only the stand speciﬁed for the instrument. When

attaching the stand or rack, use the provided screws only.

Failure to do so could cause damage to the internal

components or result in the instrument falling over.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor Location

(3)-7 2/2

• Before connecting the instrument to other electronic

components, turn off the power for all components. Before

turning the power on or off for all components, set all

volume levels to minimum. Also, be sure to set the volumes

of all components at their minimum levels and gradually

raise the volume controls while playing the instrument to

set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not

use paint thinners, solvents, cleaning ﬂuids, or chemical-

impregnated wiping cloths.

• Do not insert a ﬁnger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into

the gaps on the panel or keyboard. If this happens, turn off

the power immediately and unplug the power cord from the

AC outlet. Then have the instrument inspected by qualiﬁed

Yamaha service personnel.

• Do not place vinyl, plastic or rubber objects on the

instrument, since this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the

instrument, and do not use excessive force on the buttons,

switches or connectors.

• Do not operate the instrument for a long period of time at a

high or uncomfortable volume level, since this can cause

permanent hearing loss. If you experience any hearing loss

or ringing in the ears, consult a physician.

• This instrument has a built-in lithium backup battery. When

you unplug the power cord from the AC outlet, the internal data

is retained. However, if the backup battery fully discharges,

this data will be lost. When the backup battery is running

low, the LCD indicates “!BatteryLo.” In this case,

immediately save the data to a Memory Card

(SmartMedia), then have qualiﬁed Yamaha service

personnel replace the backup battery.

Saving and backing up your data

• Any edited data (see pages 33 and 40) that is left un-stored

will be lost if you turn off the power to the instrument. Save the

data to the USER memory (see page 50).

• USER memory data (see page 20) is retained when the

power is turned off, as long as the backup battery retains a

charge. However, the data could be lost due to malfunction

or incorrect operation. Save important data to a Memory

Card (SmartMedia).

Backing up the Memory Card (SmartMedia)

•To protect against data loss through media damage, we

recommend that you save your important data onto two

Memory Cards (SmartMedia).

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the instrument, or data that is lost

or destroyed.

Always turn the power off when the instrument is not in use.

Even when the power switch is in the “STANDBY” position, electricity is still ﬂowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

Connections

Maintenance

Handling caution

Backup battery

Saving data

6

Introduction

Thank you for purchasing the Yamaha S08 Music Synthesizer. In order to get the most out of your new S08 and its

sophisticated functions, we suggest you read through this manual thoroughly. Also keep it in a safe, convenient place

so that you can regularly refer to it when necessary.

Package Contents

• PA-5C AC Adaptor * • CD-ROM •Installation Guide

• Owner’s Manual • Data List

* May not be included in your area. Please check with your Yamaha dealer.

About the Included CD-ROM

Application software for your S08 is included on this CD-ROM. The Voice Editor lets you edit the Voices of the S08

with a highly intuitive graphical interface. With the included sequencing software (Windows only), you can easily

create and edit your own original songs on your computer. For details, refer to the separate Installation Guide or the

on-line manual included with the software.

Never attempt to play back the CD-ROM on an audio CD player. Doing so may result in damage to your hearing as well as

to your CD player/audio speakers.

Main Features

•Exceptionally high-quality dynamic Voices — including many sounds from Yamaha’s top-of-the-line S80 Music

Synthesizer (page 16).

• Naturally responsive 88-key Balanced Hammer Effect keyboard, drawing on our extensive experience and

expertise in piano-making.

• Wide variety of pro-quality digital effects (page 46).

• Category Search function for quickly calling up Voices in a desired instrument group (page 31).

•A total of 493 Normal Voices and 29 Drum Voices, all GM2/XG-compatible — in addition to Preset Voices and

User Voices (page 20).

• Memory cards, which let you easily organize and archive the internal data (page 53).

• Sequence Play function, that lets you directly play song ﬁles stored to memory cards (page 51).

• Comprehensive, detailed editing features for customizing your Voices (page 40 and 58).

• Convenient USB terminal for direct, easy connection to computer — with just one cable (page 14).

GM System Level 1

“GM System Level 1” is a standard speciﬁcation that deﬁnes the arrangement of voices in a tone generator and its MIDI

functionality, ensuring that data can be played back with substantially the same sounds on any GM-compatible tone

generator, regardless of its manufacturer or model. Tone generators and song data that meet the “GM System Level 1” bear

this GM logo.

GM System Level 2 (GM2)

“GM System Level 2” is a standard speciﬁcation that enhances the original “GM System Level 1” and improves song data

compatibility. It provides for increased polyphony, greater voice selection, expanded voice parameters, and integrated effect

processing. Tone generators and song data that meet the “GM System Level 2” speciﬁcations bear this GM2 logo.

XG

“XG” is a tone generator format that expands the voice arrangement of the “GM System Level 1” speciﬁcation to meet the

ever-increasing demands of today’s computer peripheral environment, providing richer expressive power while maintaining

upward compatibility of data. “XG” greatly expands “GM System Level 1” by deﬁning the ways in which voices are expanded

or edited and the structure and type of effects.

When commercially available song data bearing the XG logo is played back on a tone generator which bears the XG logo, you

will enjoy a full musical experience that includes unlimited expansion voices and effect functions.

USB

USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with peripheral devices.

It allows “hot swapping” (connecting peripheral devices while the power to the computer is on).

7

About This Manual

This manual consists of the following sections.

■ Basics Section (page 11)

This section provides a overview of the main functions and features of the S08 and introduces you to the basic

operating conventions.

■ Quick Guide (page 29)

This section explains how to use the basic functions.

■ Reference : Function List (page 58)

The S08 encyclopedia. This section explains all parameters.

■ Appendix (page 72)

This section contains detailed information on the S08 such as MIDI, Display Messages, Troubleshooting and

Speciﬁcations.

■ Installation Guide (separate booklet)

Refer to this for instructions on installing the included software programs (on the CD-ROM) to your computer.

■ Data List (separate booklet)

This contains various important lists such as the Voice List, Wave List, Multi List, and MIDI Implementation

Chart.

About the “Page” References in this Manual

PAGE xx ..... Refers to a display “page” in the LCD

page xx........ Refers to an actual page in this manual.

Many of the functions and parameters of the S08 are shown on various display “pages,” each of which is numbered

within each mode and indicated in the display. Searching for a function or parameter is made more convenient and

fast by the use of these page numbers.

To distinguish these display page references from actual pages in the manual, we’ve applied the following convention:

“PAGE” (all capital letters) refers to the display page. Unless indicated otherwise, the PAGE reference is for display

pages within the same mode (as described for other parameters in the same section).

Throughout the manual, parameter names are prefaced by numbers, such as “13-2 Resonance.” This, for example,

indicates that the Resonance parameter is on display PAGE 13 in the selected mode.

When one display page contains two or more related parameters, use the [ ]/[ ] buttons (page 26) to scroll

through the available parameters. These related parameters selected by the [ ]/[ ] buttons are indicated by

hyphenated numbers (e.g., 13-1, 13-2, etc.). In the example above, you can select the Resonance parameter by using

the [ ]/[ ] buttons to move to the second page.

n For a full listing of the parameters and their corresponding display pages, refer to the Function List (page 58) or the

Parameter Table (page 18).

● Copying of the commercially available music sequence data and/or digital audio ﬁles is strictry prohibited except

for your personal use.

● The illustrations and LCD screens as shown in this owner’s manual are for instructional purposes only, and may

appear somewhat different from those on your instrument.

● The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of

their respective companies.

8

Application Index

This convenient, easy-to-use index is divided to general categories to help you when you want to ﬁnd information on

a speciﬁc topic or function.

■

Listening/Playing

• Listening to Demo songs ................................................................................................................................... Demo Playback (Page 16)

• Playing the voices .......................................................................................................................................................................... (Page 29)

• Calling up Voices in a desired instrument group ........................................................................ Using Voice Category Search (Page 31)

• Playing songs from memory cards................................................................................................................................................ (Page 51)

• Assigning songs to each chain step automatically....................................................................................................................... (Page 52)

• Converting Standard MIDI ﬁle from format 1 to format 0..... the separate Installation Guide and the Card Filer Owner’s Manual (PDF)

• Performing live while playing back a Song ﬁle ........................................................................................................................... (Page 34)

• Splitting the keyboard — Setting upper and lower ranges for the Voices

- In Multi mode............................................................................................................................................................................. (Page 34)

- In Voice mode ........................................................................................................................................................... Note Limit (Page 59)

• Layering two voices (Parts together) ............................................................................................................................................ (Page 35)

• Changing the keyboard played part in the Multi mode ...............................................................................................Trans Ch (Page 66)

• Selecting the touch sensitivity (Global setting) ......................................................................................................................... (Page 57)

• Changing the volume response to your playing strength - getting high volume from soft playing or soft volume from strong playing

(for each Voice/Multi).......................................................................................................................VelSnsDpt/VelSnsOfs (Pages 58, 64)

■ Using controllers

• Connecting controllers .................................................................................................................................................................. (Page 15)

• Setting the Pitch Bend Range............................................................................................................................... PB Range (Pages 58, 65)

• Using a Foot Controller/Footswitch to control parameters ........................................................................................................ (Page 38)

• Using a Footswitch to start/stop the sequencer........................................................................................................................... (Page 38)

• Using a Footswitch to advance through Voice or Multi programs.............................................................................................. (Page 38)

• Maintaining the controller state/position when you switch between voices ................................................ Controller Reset (Page 67)

• Setting the AC1 (Assignable Controller 1) Controller .........................................................................................................(Pages 37, 38)

• Controlling the effect depth

- MW (Modulation wheel settings) ...................................................................................................................MW VarCtl (Pages 59, 64)

- AC1 (Assignable controller 1 ) settings .......................................................................................................... AC1 VarCts(Pages 59, 64)

■ Copying

• Copying the Voice Variation Effect settings to the Multi mode ............................................................. Copy Variation Effect (Page 49)

• Copying the Controller settings of the Voice mode to the Multi mode............................................................Copy Controller (Page 49)

• Copying Element parameter settings of the Voice being edited to another Element in the same Voice................................... (Page 48)

• Copying Part parameter settings of the Multi being edited to another Part in the same Multi ................................................ (Page 49)

• Backing up your S08 data ..............................................Saving S08 Settings to an External Device/Saving the Settings (Pages 36, 50)

■ Changing the sound

• Editing a Voice ............................................................................................................................................................. Voice Edit (Page 40)

• Effect structure and signal ﬂow........................................................................................................................................Effects (Page 46)

• Editing the effect settings................................................................................................................. Example of Effect Settings (Page 46)

• Adjusting the Voice sustain..........................................................................................................................................AEGRelR (Page 61)

• Getting a brighter sound ....................................................................................................................................................Cutoff (Page 43)

• Getting a more pronounced effect ............................................................................................................................. Resonance (Page 43)

• Simulating monophonic instruments................................................................................................................Mono/Poly (Pages 58, 64)

• Setting the stereo pan position................................................................................................................................. Pan (Pages 59, 62, 63)

• Changing the Element/Part that is sounded according to the velocity................................................................................... VelLmt-L/H

In Voice Mode................................................................................................................................................................................ (Page 59)

In Multi Mode................................................................................................................................................................................ (Page 64)

• Getting a smooth transition in pitch from one note to the next............................................................... Porta Sw/Time (Pages 58, 65)

■ Changing the pitch

• Transposing the sound/Adjusting the pitch (tone generator settings)

- Voice (Element ) settings ............................................................................................................................. Note Shift/Detune(Page 59)

- Multi (Part) settings.................................................................................................................................... Note Shift/Detune (Page 64)

- Multi (Common) settings .........................................................................................................................................Transpose (Page 63)

• Transposing the keyboard.......................................................................................................................................... Kbd Trans (Page 67)

• Adjust the tuning to other instruments ..................................................................................................................MasterTune (Page 66)

• Setting the all notes (keys) to the same pitch ............................................................................................................ PchSclSns (Page 59)

9

Application Index

■ Setting the volume/level

• Adjusting the total volume................................................................................................................................ VOLUME slider (Page 12)

• Adjusting the Multi volume (affects all parts)............................................................................................................. Total Vol (Page 63)

• Adjusting each part’s volume...........................................................................................................................................Volume (Page 64)

• Adjusting the Voice volume (affects all elements)................................................................................................ Total Lvl/Vol (Page 63)

• Adjusting each element’s volume ....................................................................................................................................... Level (Page 59)

• Adjusting each drum key’s volume..................................................................................................................................... Level (Page 62)

■ Setting the sound of a drum voice

• Moving the pan position randomly each time a key is pressed............................................................................................ Pan (Page 62)

• Setting the drum key for independent open and closed hi-hat sounds ................................................................... Alt. Group (Page 62)

• Setting the key release response: Enabling a sound to decay naturally even when a key is released,

or having the sound cut off when key is released.....................................................................................................RxNoteOff (Page 62)

• Disabling the sound for speciﬁc instruments in a drum kit..................................................................................... RxNoteOn (Page 62)

■ Selectively disabling sounds

• Keeping certain elements from sounding temporarily during editing........................................................Mute function (Pages 41, 42)

• Disabling the sound of speciﬁc elements................................................................................................................. Element Sw (Page 59)

• Keeping certain parts from sounding temporarily.............................................................................................. Mute function (Page 41)

• Disabling the sound of speciﬁc parts................................................................................................................................ RcvCh (Page 64)

• Disabling the sound of speciﬁc keys (instrument sounds) in a drum kit............................................................... Rx NoteOn (Page 62)

■ Convenient editing functions

• Monitoring an Element for Editing.............................................................................................................................................. (Page 42)

• Creating a completely new Voice/Multi from scratch ................................................................................................................ (Page 48)

• Listening to the difference between the Voice/Multi with your edited settings

and the same Voice/Multi prior to editing ................................................................................................... Compare Function (Page 41)

■ Entering data

• Entering the value directly with the numeric keypad or the keyboard...................................................................................... (Page 28)

• Entering characters (Voice/Multi/File Name Settings)............................................................................................................. (Page 50)

■ Saving data

• Storing the edited Voice/Multi to the S08’s internal (USER) memory...................................................................................... (Page 50)

• Saving S08 settings (Voice/Multi/MIDI/Utility) to an external device such as a computer or Memory Card................ (Pages 36, 54)

■ Connecting the S08 to other devices

• Connecting a computer .......................................................................................................... Connecting a Personal computer (Page 14)

• Setting Local On/Off ...................................................................................................................................... Local On/Off (Pages 15, 67)

• Using the S08 as a multitimbral tone generator .......................................................................................................................... (Page 33)

• Sending the S08 data using the Bulk Dump function .......................................... Saving S08 Settings to an External Device (Page 36)

• Editing Voices using a computer..................................The separate Installation Guide and S08 Voice Editor Owner’s Manual (PDF)

• Using the included sequencing software (Windows only).............The separate Installation Guide and the application’s on-line help

• Setting the S08 to either receive or ignore program changes (Voice/Multi) from an external device..... RxPgmChng/RxBankSel (Page 66)

• Determining whether or not the S08 sends program changes to an external device .......................TxPgmChng/TxBankSel (Page

66

)

• Determining whether or not an external sequencer starts/stops when starting/stopping the S08’s sequencer............SeqCtl (Page

66

)

• Determining whether or not the S08’s sequencer starts/stops when starting/stopping an external sequencer ............SeqCtl (Page

66

)

■ Resetting parameters (Initializing)

• Initializing Voice/Multi parameters.............................................................................................................................. Initialize (Page 48)

• Initializing chain step parameters ................................................................................................................................... InitSeq (Page 52)

• Formatting Memory Card.............................................................................................................................................................. (page 55)

• Resetting the S08 to its default settings....................................................................... Factory Set (Restore Factory Defaults) (Page 23)

■ Quick solutions and reference materials

• Global functions of the Function List .......................................................................................................................................... (Page 58)

• S08 parameter structure and the LCD PAGES ................................................................................................ Parameter Table (Page 18)

• Display Indications........................................................................................................................................................................ (Page 25)

• Memory Structure — indicating where various settings are stored........................................................................................... (Page 20)

• Voice Structure - examining which elements are used in the voices .................... Checking the Voice Structure and Muting (Page 42)

• Parameters that are not effective for drum-voice-assigned parts................................................................................................ (Page 22)

• Explanation of Effect Types ................................................................................................................................... The separate Data List

• Lists of the Voices, Multis, Waves, Original Kits, etc............................................................................................. The separate Data List

• General information on MIDI ................................................................................................................................ About MIDI (Page 72)

• Meaning of the display messages.................................................................................................................... Display Messages (Page 77)

• Troubleshooting............................................................................................................................................................................ (Page 78)

10

Table of Contents

Basics Section .........................11

The Controls & Connectors ............................................. 11

Top Panel .................................................................................. 11

Rear Panel ................................................................................. 11

Before Use .......................................................................... 12

Power Supply ............................................................................ 12

Power-on Procedure .................................................................. 12

Turning on the S08 .................................................................... 12

Connections ....................................................................... 13

Demo Playback .................................................................. 16

Overview of the S08 .......................................................... 16

Controller .................................................................................. 17

Tone Generator ......................................................................... 17

Effects ....................................................................................... 17

Card Drive/Sequencer ...............................................................17

Parameter Table ................................................................ 18

Voices & Multis................................................................. 20

Memory Structure ..................................................................... 20

Overview of Voice/Element/Multi ........................................... 21

Normal Voices & Drum Voices ................................................ 22

Part Mode Setting .....................................................................22

Factory Set (Restore Factory Defaults) ........................... 23

Basic Operations ............................................................... 24

Modes ................................................................................. 24

Mode Table ........................................................................ 24

Selecting a Mode ............................................................... 24

Display Indications ........................................................... 25

Selecting a Screen .............................................................. 26

Entering Data .................................................................... 27

Quick Guide ...........................29

Playing Voices ................................................................... 29

Using Multi Mode ............................................................. 32

Playing in Multi Mode .............................................................. 32

Using the S08 as a Multitimbral Tone Generator (Multi Edit) .33

Layering Two Voices (Parts) Together ..................................... 35

Using Controllers .............................................................. 37

Pitch Bend Wheel & Modulation Wheel .................................. 37

Foot Controller .......................................................................... 38

Foot Switch ............................................................................... 38

Voice Edit ........................................................................... 40

Effects ................................................................................. 46

Effects in Voice Mode .............................................................. 47

Effects in Multi Mode............................................................... 47

Using the Jobs .................................................................... 48

Saving the Settings (Store) ............................................... 50

Playing the Songs .............................................................. 51

Using the Memory Card ................................................... 53

Touch Sensitivity ............................................................... 57

Reference................................58

Voice Edit (Normal) .................................................................. 58

Voice Edit (Drum)..................................................................... 62

Voice Job ................................................................................... 63

Voice Store ................................................................................ 63

Multi Edit................................................................................... 63

Multi Job.................................................................................... 65

Multi Store................................................................................. 66

Sequence Play............................................................................ 66

Sequence Play Job ..................................................................... 66

Utility......................................................................................... 66

Utility Job .................................................................................. 67

Controller................................................................................... 67

Card ........................................................................................... 67

Appendix ...............................72

About MIDI ....................................................................... 72

Display Messages ............................................................... 77

Troubleshooting ................................................................ 78

Specifications ..................................................................... 83

Index ................................................................................... 84

11

Basics SectionQuick GuideReferenceAppendix

The Controls & Connectors

Basics Section

The Controls & Connectors

Top Panel

1 PITCH bend wheel (page 37)

2 MODULATION wheel (page 37)

3 [VOLUME] Slider (page 12)

4 LCD (Liquid Crystal Display)(page 24)

5 Parameter Type List (page 26)

6 MODE buttons (page 24)

7 [PART/ELEMENT/KEY] buttons

7-1 [+]/[–] buttons (page 26)

7-2 [MUTE] button (pages 41, 42)

8 DATA buttons (page 26)

8-1 [DEC/NO] button (page 27)

8-2 [INC/YES] button (page 27)

8-3 [ ]/[ ] buttons (page 26)

8-4 [ ]/[ ] buttons (page 26)

9 [CATEGORY SEARCH/DRUM] button (pages 30, 31)

) [PRESET/(DRUM/PERC)] button (pages 29, 31)

! [USER/(SE)] button (pages 29, 31)

@ [GM2/XG/(OTHER)] button (pages 29, 31)

# Numeric keypad (pages 28, 30)

$ [ENTER/KEYBOARD] button (page 28)

% [EXIT] button (page 27)

^ Data Dial (page 27)

Rear Panel

& USB terminal (page 14)

* Memory Card slot (page 53)

( MIDI IN/OUT/THRU terminals (pages 13)

º FOOT SWITCH jack (pages 15, 38)

¡ FOOT CONTROLLER jack (pages 15, 38)

™ STANDBY/ON switch (page 12)

£ DC IN terminal (page 12)

¢ OUTPUT L/MONO and R jack (page 13)

∞ PHONES jack (page 13)

n Host Select parameter is set in the Utility mode (page13).

MUSIC SYNTHESIZER

EXITENTER

KEYBOARD

—

0

1

2

3

4

56

7

89

PRESET

USER

GM2/XG

DRUM

MUTE

+—

COMMON

INC/YESDEC/NO

DEMO

UTILITY CONTROLLER CARD

EDIT

JOB

STORE

PLAY/STOP

COMPARE

VOICE

MULTI SEQ PLAY

PART/

COMMON

VOICE

MIX

GENERAL

TONE

CONTROLLER

EFFECT

ELEMENT

OSC/MIX

PITCH

FILTER

AMP

LFO

EFFECT

TG

MIDI CHANNEL

MIDI FILTER

SEQ SETUP

MIDI SETUP

EFFECT

CTRL ASSIGN

KEYBOARD

VELOCITY

CTRL SETUP

SAVE

LOAD

RENAME

DELETE

FORMAT

IMPORT

VOLU

M

E

PITC

H

M

ODULATION

PHONES

L/MONO

OUTPUT

R DC IN ON

STANDBY

FOOT

CONTROLLER

FOOT

SWITCH

IN OUT THRU

MIDI

CARD

3.3V

USB

GUITARORGANPIANO

CATEGORY

SEARCH

BASS STRINGS BRASS

REED/PIPE

SYN LEAD

SYN COMP

DRUM/PERC

SE

OTHER

CHROMATIC

PERCUSSION

SYN PAD

UTILITY

CARD

CONTROLLER

CARDUTILITYEDIT

CONTROLLER

PART/E LEMENT/ KEY

MODE

DATA

32145679)#^

A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B5 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7

8$@!%

DC IN

ON

FOOT

CONTROLLER

FOOT

SWITCH

MIDI

OUT

IN

THRU

USB

CARD

3.3V

STANDBY

PHONES

L/MONO

R

OUTPUT

&* ( º¡™£¢∞

12

Basics Section Quick Guide Reference Appendix

Before Use

Power Supply

1 Make sure that the S08’s STANDBY/ON switch is

at the STANDBY (off) position.

2 Connect the PA-5C’s DC plug to the S08’s DC IN

terminal on the instrument’s rear panel.

3 Connect the adaptor’s AC plug to the nearest

electrical outlet.

Do not attempt to use an AC adaptor other than the

Yamaha PA-5C or an equivalent recommended by

Yamaha. The use of an incompatible adaptor may cause

irreparable damage to the S08, and may even pose a

serious shock hazard! ALWAYS UNPLUG THE AC

ADAPTOR FROM THE AC POWER OUTLET WHEN

THE S08 IS NOT IN USE.

Even when the switch is in the “STANDBY” position,

electricity is still ﬂowing to the instrument at a minimum

level. When not using the S08 for an extended period of

time, be sure to unplug the AC power adaptor from the

wall AC outlet.

Power-on Procedure

When you have made all the necessary connections

between your S08 and any other devices (page 13),

make sure that all volume settings are turned down all

the way to zero. Then turn on every device in your

setup in the order of MIDI masters (senders), MIDI

slaves (receivers), then the audio equipment (mixers,

ampliﬁers, speakers, etc.). This ensures smooth MIDI

operation and prevents speaker damage.

When powering down the setup, ﬁrst turn down the

volume for each audio device, then switch off each

device in the reverse order (ﬁrst audio devices, then

MIDI).

When using the S08 as MIDI slave:

Turning on the S08

In order to avoid possible damage to the speakers or other

connected electronic equipment, always switch on the

power of the S08 before switching on the power of the

ampliﬁed speakers or mixer and ampliﬁer. Likewise,

always switch off the power of the S08 after switching off

the power of the ampliﬁed speakers or mixer and

ampliﬁer.

n Before you switch your S08 on or off, ﬁrst turn down the

volume of any connected audio equipment.

1 Press the STANDBY/ON switch.

A splash screen (“Welcome to S08”) is displayed

brieﬂy. The Multi or Voice Play Mode screen

appears next.

2 Turn up the ampliﬁer’s volume as necessary.

3 Adjust the S08’s [VOLUME] slider to set an

appropriate volume level.

DC IN

ON

T

LLER

STANDBY

PHONES

L/MONO

R

OUTPUT

DC IN

STANDBY/ON switch

Rear Panel

To electrical

outlet

MIDI master (transmitting device)

Audio equipment (first mixer, then amplifier)

12345678910111213141516LR

POWER

ON!!

S08 as MIDI slave (MIDI receiving device)

PLG 2

A

B

C

D

E

F

G

H

15

CATEGORY

SEARCH

OCTAVE

DOWN

UP

KNOB

CONTROL

FUNCTION

PAN

REVERB

CHORUS

TEMPO

ATTACK R ELE ASECUTOFF

RESONANCE

ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2

KN 1 KN 2 KN 3 KN 4

MEQ LOW

MEQ HI MIDMEQLOWMID MEQ HIGH

REMOTE

CONTROL

ON/OFF

EFFECT BYPASS

ARPEGGIO

INSERTION

SYSTEM

ON/OFF

MASTER

VOLUME

VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4

CS 1 CS 2 CS 3 CS 4

ZONE 1 ZONE 2 ZONE 3 ZONE 4

SEQ

TRANSPORT

LOCATE

1

2

REC

MODE

VOICE PERFORM MASTER

SEQUENCER

SONG

PATTERN

FILE

INTEGRATED

SAMPLING

MIXING

UTILITY

EDIT

JOB

STORE

COMPARE

SCENE STORE

SET LOCATE

SONG SCENE

SF 1SF 2SF 3SF 4SF 5

F1 F2 F3 F4 F6F5

INFORMATION

DEC/NO INC/YES

EXIT

ENTER

EXECUTE

MUSIC

PRODUCTION

SYNTHESIZER

Integrated

Sampling

Sequencer

Real-timeExternalControl

Surface

Modular

SynthesisPlug-in

System

DRUM KITS

FAVORITES

SLOT 1 SLOT 2 SLOT 3

PRE 1

PRE 2

PRE 3

GM

USER PLG 1

PLG 3

A. PIANO

KEYBOARD

ORGAN

GUITAR/

PLUCKED

BASS

STRINGS

BRASS

REED/PIPE

SYN LEAD SYN PAD/

CHOIR

SYN COMP CHROMATIC

PERCUSSION

DRUM/

PERCUSSION

SE

MUSICAL FX COMBI

1

23

4

5

6

7

8

9

10

11

12

13

14

16

SECTION

TRACK

SELECT

MUTE

SOLO

BANK

GROUP

NUMBER

COMMON

ELEMENT/PERF.PART/ZONE

MUSIC SYNTHESIZER

DC IN

ON

FOOT

CONTROLLER

FOOT

SWITCH

STANDBY

PHONES

L/MONO

R

OUTPUT

VOLU

M

E

13

Basics SectionQuick GuideReferenceAppendix

Connections

Before connecting the S08 to other electronic components, turn off the power to all the components. Before turning the power on or

off to all components, set all volume levels to minimum(0). Otherwise, electrical shock or damage to the components may occur.

Connecting to External

Audio Equipment

Since the S08 has no built-in speakers, you need to

monitor its sound output via external audio

equipment. Alternatively, you could use a pair of

headphones. There are several methods of connecting

to external audio equipment, as described in the

following illustrations.

Connecting Stereo Powered Speakers

A pair of powered speakers can accurately produce the

S08’s rich sounds with their own pan and effect

settings. Connect your powered speakers to the

OUTPUT L/MONO and R jacks on the rear panel.

n When using just one powered speaker, connect it to the

OUTPUT L/MONO jack on the rear panel.

Connecting to a Mixer

If you want to integrate the S08 into a larger system

with other instruments and additional audio

processing capabilities, connect it to a mixer, ampliﬁer

and stereo monitor system as shown below.

n Connecting a pair of headphones does not affect audio

output from the OUTPUT (L/MONO and R) jacks. The

audio output at the PHONES jack and the OUTPUT

jacks is exactly the same.

Connecting External MIDI

Equipment

You can connect an external MIDI device using a MIDI

cable (available separately) and control it from the S08.

You can also use an external MIDI keyboard or

sequencer to control the S08’s internal sounds. This

section introduces several different MIDI applications.

n The HOST SELECT (UTILITY PAGE 13) should be set

to “MIDI.” Otherwise, MIDI data will not be transmitted

from the S08’s MIDI OUT connector.

Controlling the S08 from an

External MIDI device

Controlling an External MIDI device

with the S08

S08

Stereo headphones

PHONES

OUTPUT L /MONO OUTPUT R

INPUTINPUT

Powered speaker

(Left)

Powered speaker

(Right)

MUSIC SYNTHESIZER

12345678910111213141516 L R

Mixer

Speaker

Amplifier

L

OUTPUT L

R

OUTPUT L /MONO

R

Stereo

headphones

PHONES

S08

MUSIC SYNTHESIZER

MIDI OUT

MIDI IN

External MIDI keyboard

or synthesizer

UTILITY PAGE 13

S08

PLG 2

A

B

C

D

E

F

G

H

15

CATEGORY

SEARCH

OCTAVE

DOWN

UP

KNOB

CONTROL

FUNCTION

PAN

REVERB

CHORUS

TEMPO

ATTACK RELEASECUTOFF

RESONANCE

ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2

KN 1 KN 2 KN 3 KN 4

MEQ LOW

MEQ HI MIDMEQLOWMID MEQ HIGH

REMOTE

CONTROL

ON/OFF

EFFECT BYPASS

ARPEGGIO

INSERTION

SYSTEM

ON/OFF

MASTER

VOLUME

VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4

CS 1 CS 2 CS 3 CS 4

ZONE 1 ZONE 2 ZONE 3 ZONE 4

SEQ

TRANSPORT

LOCATE

1

2

REC

MODE

VOICE PERFORM MASTER

SEQUENCER

SONG

PATTERN

FILE

INTEGRATED

SAMPLING

MIXING

UTILITY

EDIT

JOB

STORE

COMPARE

SCENE STORE

SET LOCATE

SONG SCENE

SF 1SF 2SF 3SF 4SF 5

F1 F2 F3 F4 F6F5

INFORMATION

DEC/NO INC/YES

EXIT

ENTER

EXECUTE

MUSIC

PRODUCTION

SYNTHESIZER

Integrated

Sampling

Sequencer

Real-timeExternalControl

Surface

Modular

SynthesisPlug-in

System

DRUM KITS

FAVORITES

SLOT 1 SLOT 2 SLOT 3

PRE 1

PRE 2

PRE 3

GM

USER PLG 1

PLG 3

A. PIANO

KEYBOARD

ORGAN

GUITAR/

PLUCKED

BASS

STRINGS

BRASS

REED/PIPE

SYN LEAD SYN PAD/

CHOIR

SYN COMP CHROMATIC

PERCUSSION

DRUM/

PERCUSSION

SE

MUSICAL FX COMBI

1

2

3

4

5

6

7

8

9

10

11

12

13

14

16

SECTION

TRACK

SELECT

MUTE

SOLO

BANK

GROUP

NUMBER

COMMON

ELEMENT/PERF.PART/ZONE

MUSIC SYNTHESIZER

KEYELEMPAR T

PAG E

HostSelect

MIDI

13

External MIDI keyboard

or synthesizer

MIDI OUT

MIDI IN

S08

PLG 2

A

B

C

D

E

F

G

H

15

CATEGORY

SEARCH

OCTAVE

DOWN

UP

KNOB

CONTROL

FUNCTION

PAN

REVERB

CHORUS

TEMPO

ATTACK RELEASECUTOFF

RESONANCE

ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2

KN 1 KN 2 KN 3 KN 4

MEQ LOW

MEQ HI MIDMEQLOWMID MEQ HIGH

REMOTE

CONTROL

ON/OFF

EFFECT BYPASS

ARPEGGIO

INSERTION

SYSTEM

ON/OFF

MASTER

VOLUME

VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4

CS 1 CS 2 CS 3 CS 4

ZONE 1 ZONE 2 ZONE 3 ZONE 4

SEQ TRANSPORT

LOCATE

1

2

REC

MODE

VOICE PERFORM MASTER

SEQUENCER

SONG

PATTERN

FILE

INTEGRATED

SAMPLING

MIXING

UTILITY

EDIT

JOB

STORE

COMPARE

SCENE STORE

SET LOCATE

SONG SCENE

SF 1SF 2SF 3SF 4SF 5

F1 F2 F3 F4 F6F5

INFORMATION

DEC/NO INC/YES

EXIT

ENTER

EXECUTE

MUSIC

PRODUCTION

SYNTHESIZER

Integrated

Sampling

Sequencer

Real-timeExternalControl

Surface

Modular

SynthesisPlug-in

System

DRUM KITS

FAVORITES

SLOT 1 SLOT 2 SLOT 3

PRE 1 PRE 2

PRE 3

GM

USER PLG 1

PLG 3

A. PIANO

KEYBOARD

ORGAN

GUITAR/

PLUCKED

BASS

STRINGS

BRASS

REED/PIPE

SYN LEAD SYN PAD/

CHOIR

SYN COMP CHROMATIC

PERCUSSION

DRUM/

PERCUSSION

SE

MUSICAL FX COMBI

1

2

3

4

5

6

7

8

9

10

11

12

13

14

16

SECTION

TRACK

SELECT

MUTE

SOLO

BANK

GROUP

NUMBER

COMMON

ELEMENT/PERF.PART/ZONE

UTILITY PAGE 13

MUSIC SYNTHESIZER

KEYELEMPAR T

PAG E

HostSelect

MIDI

13

14

Basics Section Quick Guide Reference Appendix

Connections

Recording and Playback using an

External MIDI Sequencer

Controlling Another MIDI Device via

MIDI THRU

With the above MIDI connections, you can send MIDI

data from the S08’s MIDI OUT terminal, while

sending MIDI data from the external sequencer to an

external MIDI synthesizer via the S08’s MIDI THRU

terminal.

n MIDI THRU simply relays the MIDI messages received

via MIDI IN.

n The MIDI cable should be no greater than 15 meters in

length, and there should be no more than three devices in

a MIDI chain (chained in series via each unit’s MIDI

THRU). To connect more units, use a MIDI Thru Box

for parallel connections. You may encounter errors if the

MIDI cables are too long or if too many devices are

chained together via their MIDI THRU connectors.

Connecting to a Personal

Computer

You can use a connected computer to control the S08

and to transfer S08 data to/from computer via MIDI.

With the included Voice Editor program, for instance,

you can edit the Voices of the S08.

There are two ways to connect your S08 to a computer:

Depending on your particular computer, the

connections may differ. (See below.)

n You may also want to change the Local On/Off setting

(pages 15 and 67), depending on how you are using the

S08 in your MIDI system.

n You will also need the appropriate MIDI application

(sequencer, editor, etc.), compatible with your computer

platform.

1: USB connection

n The data via the MIDI IN terminal is ignored when using

the USB port (Host Select set to “USB”).

n When connecting the S08 to a computer with a USB

cable, make sure that the USB cable is properly connected

before turning on the power.

Be careful not to turn off the power of the S08 if an

application using the USB/MIDI connection is currently

running.

n The USB connection can only be used for transfer of

MIDI data. No audio data can be transferred via USB.

n Once connected via USB, the S08 begins communication

after a short time.

n Keep in mind that when using Windows 2000/XP, some

operating problems on the computer may occur during

startup. If this happens, try turning on the power of the

S08 only after the computer is properly running.

n When connecting the S08 and your computer via USB,

make sure to connect them directly without routing

through a USB hub.

MIDI OUT

External

MIDI sequencer

S08

MIDI IN

UTILITY PAGE 13

MUSIC SYNTHESIZER

KEYELEMPAR T

PAG E

HostSelect

MIDI

13

MIDI IN

MIDI THRU

MIDI OUT

MIDI IN

External

MIDI sequencer

External

MIDI sequencer

External MIDI synthesizer

MIDI OUT

MIDI IN

S08

PLG 2

A

B

C

D

E

F

G

H

15

CATEGORY

SEARCH

OCTAVE

DOWN

UP

KNOB

CONTROL

FUNCTION

PAN

REVERB

CHORUS

TEMPO

ATTACK RELEASECUTOFF

RESONANCE

ASSIGN A ASSIGN B ASSIGN 1 ASSIGN 2

KN 1 KN 2 KN 3 KN 4

MEQ LOW

MEQ HI MIDMEQLOWMID MEQ HIGH

REMOTE

CONTROL

ON/OFF

EFFECT BYPASS

ARPEGGIO

INSERTION

SYSTEM

ON/OFF

MASTER

VOLUME

VOLUME 1 VOLUME 2 VOLUME 3 VOLUME 4

CS 1 CS 2 CS 3 CS 4

ZONE 1 ZONE 2 ZONE 3 ZONE 4

SEQ

TRANSPORT

LOCATE

1

2

REC

MODE

VOICE PERFORM MASTER

SEQUENCER

SONG

PATTERN FILE

INTEGRATED

SAMPLING

MIXING

UTILITY

EDIT

JOB

STORE

COMPARE

SCENE STORE

SET LOCATE

SONG SCENE

SF 1SF 2SF 3SF 4SF 5

F1 F2 F3 F4 F6F5

INFORMATION

DEC/NO INC/YES

EXIT

ENTER

EXECUTE

MUSIC

PRODUCTION

SYNTHESIZER

Integrated

Sampling

Sequencer

Real-timeExternalControl

Surface

Modular

SynthesisPlug-in

System

DRUM KITS

FAVORITES

SLOT 1 SLOT 2 SLOT 3

PRE 1

PRE 2

PRE 3

GM

USER PLG 1

PLG 3

A. PIANO

KEYBOARD

ORGAN

GUITAR/

PLUCKED

BASS

STRINGS

BRASS

REED/PIPE

SYN LEAD SYN PAD/

CHOIR

SYN COMP CHROMATIC

PERCUSSION

DRUM/

PERCUSSION

SE

MUSICAL FX COMBI

1

2

3

4

5

6

7

8

9

10

11

12

13

14

16

SECTION

TRACK

SELECT

MUTE

SOLO

BANK

GROUP

NUMBER

COMMON

ELEMENT/PERF.PART/ZONE

UTILITY PAGE 13

MUSIC SYNTHESIZER

KEYELEMPAR T

PAG E

HostSelect

MIDI

13

USB connecter

USB cable

Computer

S08

UTILITY PAGE 13

MUSIC SYNTHESIZER

KEYELEMPAR T

PAG E

HostSelect

USB

13

15

Basics SectionQuick GuideReferenceAppendix

Connections

2:

MIDI connection

Using the computer’s MIDI interface

Using an external MIDI interface

n Please use the appropriate MIDI interface for your

computer.

Local On/Off — When Connected to a

Computer (UTILITY PAGE 12)

When connecting the S08 to a computer, the

keyboard performance data is generally sent to the

computer, and then returned from the computer to

play the tone generator or sound source. If the Local

Switch is set to “on,” a “double” sound may result,

since the tone generator is receiving performance

data from both the keyboard directly and the

computer. Use the setting suggestions below as a

guideline; speciﬁc instructions may differ depending

on your computer and the software used.

When MIDI “Echo” is enabled on the software/

computer, set the S08 Local Switch to “off.”

n When transmitting or receiving System Exclusive

data (such as with the Bulk Dump function, pages

36 and 49), use the setting example below, making

sure that MIDI “Echo” on the computer software is

set to “off.”

When MIDI “Echo” is disabled on the software/

computer, set the S08 Local Switch to “on.”

n Although not indicated in the illustration above,

the S08 actually receives and responds to MIDI

data from the computer application (sequencer),

regardless of the Local Sw setting on the S08.

* MIDI “Echo” is a function on sequencers that

takes any data received via the MIDI IN and

“echoes” it (or sends it as is) through the MIDI OUT.

In some software, this function is also called “MIDI

Thru.”

n Refer to the owner’s manual of your particular

software for speciﬁc instructions.

Connecting Controllers

The S08 has controller jacks on the rear panel,

including FOOT SWITCH and FOOT CONTROLLER.

You can connect optional controllers such as a

footswitch (the FC4 or FC5) and foot controller (the

FC7) to control tone, volume, pitch and other

parameters.

n Details about how to use these controllers are given on

page 37.

MIDI cable

S08

MIDI

OUT

MIDI

IN

MIDI IN MIDI OUT

Computer with

MIDI interface

NEC

PC-9821

AS

NEC MultiSync

UTILITY PAGE 13

MUSIC SYNTHESIZER

KEYELEMPART

PAG E

HostSelect

MIDI

13

MIDI interface

MIDI OUT

MIDI IN

MIDI IN MIDI OUT

Serial port

(modem or printer port)

or USB port

Computer

S08

UTILITY PAGE 13

MUSIC SYNTHESIZER

KEYELEMPART

PAG E

HostSelect

MIDI

13

Echo Back On

Local Off

Computer with

Application Software

Tone

Generator

Keyboard

S08 Local Sw=off

IN OUT

USB

OUT

IN

Echo Back On

Local Off

Computer with

Application Software

Tone

Generator

Keyboard

S08 Local Sw=on

OUT

IN

USB

DC IN

ON

FOOT

CONTROLLER

FOOT

SWITCH

STANDBY

PHONES

L/MONO

R

OUTPUT

FOOT SWITCH

FC4 or FC5

FOOT CONTROLLER

FC7

Rear panel

16

Basics Section Quick Guide Reference Appendix

Demo Playback

The S08 features a variety of demo songs, showcasing its dynamic sound and sophisticated functions.

n Make sure the synthesizer is ready for playback. Details are given in the section “Before Use” on page 12.

1 Press the [MULTI] and [SEQ PLAY] buttons simultaneously to call up the Demo screen and automatically start

playback of the Demo song.

Demo Song Selection

While the Demo song is playing back, you can select the particular Demo song that you wish to hear.

Enter the desired Demo song category from the numeric keypad to call up the song.

For example, you can play the piano song by pressing button 7 (PIANO) in the numeric keypad. If you don’t select a

particular song, an ensemble (OTHER) song will play back automatically.

n When there are several Demo songs contained in one category, you can select from among the available songs by using the

[DEC/NO] and [INC/YES] buttons.

2 The [PLAY/STOP] button lets you pause playback and then start again from the same point in the song.

3 To stop Demo playback, press one of the following buttons: [VOICE], [MULTI], [SEQ PLAY] or [EXIT].

This exits from the Demo mode and automatically returns to the Multi mode, Voice mode, or the mode previously

selected.

n Demo song playback continues indeﬁnitely until stopped.

Overview of the S08

The S08 has a wide variety of advanced and convenient features. This section gives you an overview of these

features. The following diagram shows the various component sections or “blocks” of the S08.

EXITENTER

KEYBOARD

—

0

1

2

3

4

56

7

89

PRESET

USER

GM2/XG

DRUM

MUTE

+—

COMMON

INC/YESDEC/NO

DEMO

UTILITY CONTROLLER CARD

EDIT

JOB

STORE

PLAY/STOP

COMPARE

VOICE

MULTI SEQ PLAY

GUITARORGANPIANO

CATEGORY

SEARCH

BASS STRINGS BRASS

REED/PIPE

SYN LEAD

SYN COMP

DRUM/PERC

SE

OTHER

CHROMATIC

PERCUSSION

SYN PAD

PART/ ELEMENT/ KEY

MODE

DATA

1

3

2

3

+

Select the

Yamaha S08 Voice Editor, S08 Инструкция по применению

Похожие модели бренда