Yamaha CS6R Инструкция по применению

1
Contents
Introduction..................................................2
Starting Up ..................................................3
Menu Bar ......................................................3
The Library Window ....................................6
The Toolbar ......................................................8
The Edit Window........................................14
The Toolbar ....................................................14
Voice Edit Window..........................................15
OMS Settings (Macintosh) ................................27
An Example of Voice Editor in Use ..................29
Troubleshooting ........................................30
• Click on the red-colored text to jump to the related item in this manual. 
• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.
• Copying of the software or reproduction of this manual in whole or in part by any means is expressly
forbidden without the written consent of the manufacturer.
• Yamaha makes no representations or warranties with regard to the use of the software and
documentation and cannot be held responsible for the results of the use of this manual and the
software.
• Copying of the commercially available music sequence data and/or digital audio files is strictly
prohibited except for your personal use.
• The company names and product names in this Owner’s Manual are the trademarks or registered
trademarks of their respective companies.
• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may
appear somewhat different from the screens which appear on your computer.
This owner’s manual is applicable to both the CS6x/CS6R Voice Editor and the S80/S30 Voice Editor (for both
Windows and Macintosh).
The screen illustrations are mainly taken from the CS6x/CS6R Voice Editor for Windows, although and
differences between versions are explained.
This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operation. If you
are not,please refer to the owner’s manual which came with your Windows/Mac OS software before using
Voice Editor.
For information about hardware requirements, the interconnection of devices and the installation of the Voice
Editor software, refer to the separate “Installation Guide” as well as the Owner’s Manual for the respective
MIDI device.
© 2000 Yamaha Corporation. All rights reserved.

Introduction

With CS6x/CS6R Voice Editor and S80/S30 Voice Editor (hereafter referred to as Voice Editor),

you can edit your CS6x/CS6R/S80/S30 synthesizer’s voices and effects via your computer. Its

graphical user interface provides for easy editing by presenting each synthesizer parameter on

screen as a knob, slider, switch, and so on, which can be manipulated using your computer’s

mouse or keyboard. Finally, all the changes you have made to your voices can be saved to

your computer. If you have saved your edits to a Memory Card (SmartMedia) in the computer,

you can insert the memory card into your CS6x/CS6R/S80/S30 synthesizer and its contents can

be read directly.

n Voice Editor for Windows is a plug-in for XGworks(lite). To use Voice Editor for Windows, XGworks(lite)

must be installed beforehand.

MUSIC SYNTHESIZER

Realtime Control

Extended Plug-in System

POWERCARDmLANMIDIHOST SELECTTO HOSTBREATH

FOOT

SWITCH

FOOT

CONTROLLER

FOOT

VOLUME

OUTIN THRU

SUSTAINPHONES INDIVIDUAL OUTPUT

OUTPUT

MONO R

D INPUT

GAIN

DOWN UP

LINE 1MIC

LINE 2

CUTOFF RESONANCE

ATTACK

DECAY SUSTAIN

CONTROL PAN

RELEASE

REVERB CHORUS

VEL RATE

OFF

PLAY

STOP

REC

OFF

HOLD

PITCH

VOICE PERFORM

SHIFT PAGE PART

ELEMENT

DEC

NO INC

YES

EXIT ENTER

BYPASS

MASTER

KEYBOARD

MEMORY

BANK

PROGRAM

PART

PRE1 A B C D E F G H

12341234

12345678

GENERAL

ELEMENTSELECT ELEMENTON

OFF

QED ARPEGGIO CONTROL COM LFO EFFECT

910111213141516

OSC PITCH FILTER AMPLITUDE LFO EQ PLG

INT

DRUM

EXT

PLG1 PLG2

PRE2

DATA

UTILITY CARD

EDIT

COMPARE

JOB

STORE

MODE

TEMPO

FILTER EFFECT

SCENE MIXER

PORTAMENTO

PHRASE CLIP

SEQ PLAY

ARPEGGIO

OCTAVE

VOLUME

SYSTEM A B C 1 2

DRUM

Library Window Save the Library file

Import a voice

Library file

Edit Window

Voice

Element

dialog

Set the effects parameters

Transmit / Receive bulk data

CS6x/CS6R/S80/S30

Starting Up

Windows 95/98

If you have a CS6x or CS6R, you can start Voice Editor by starting XGworks and choosing

“CS6x/CS6R VoiceEditor” from the “Plug-in” menu. If you have an S80 or S30, choose

“S80/S30 VoiceEditor” instead.

Macintosh

n If you are using Voice Editor on a Macintosh computer, open the “Chooser” from the Apple menu and

turn off “Apple Talk.”

If you have a CS6x or CS6R, open the “CS6x/CS6R Voice Editor” folder in the “YAMAHA Voice

Editor” folder and double-click the “CS6x/CS6R Voice Editor” icon.

If you have an S80 or S30, open the “S80/S30 Voice Editor” folder in the “YAMAHA Voice

Editor” folder and double-click the “S80/S30 Voice Editor” icon.

Menu Bar

The Menu Bar holds various editing and setup functions/commands in its menus. Click each of

the menu names to open their pull-down menu, and choose the function/command you wish to

apply. Those functions/commands which are unavailable are grayed out.

n The most commonly-used menus in the Menu Bar are available as buttons in Voice Editor's toolbar.

n To use Voice Editor for Windows, refer to the documentation that came with XGworks(lite).

File

CS6x/CS6R(S80/S30)Voice Editor New (New)

Creates and opens a new Library file.

CS6x/CS6R(S80/S30)Voice Editor Open Library (Open)

This is the same as the “Open” button in the Toolbar (Page 8).

Windows Macintosh

CS6x/CS6R(S80/S30)Voice Editor Save Library (Save)

This is the same as the “Save” button in the Toolbar (Page 9).

CS6x/CS6R(S80/S30)Voice Editor Save Library As (Save As)

Lets you save the Library file under a new or different name.

Close (Macintosh only)

Close the window. This is the same as the “Close” box in the Title Bar.

Edit

Copy

Copies the selected voice to the clipboard. If nothing is selected, this item is grayed out.

Paste

Copies the voice from the clipboard to Voice Editor.

CS6x/CS6R(S80/S30)Voice Editor Edit (Edit)

This is the same as the “Edit Window” button in the toolbar (Page 12).

CS6x/CS6R(S80/S30)Voice Editor Library (Library)

This is the same as the “Library Window” button in the toolbar (Page 14).

CS6x/CS6R(S80/S30)Voice Editor Store (Store)

This is the same as the “Store” button in the toolbar (Page 14).

CS6x/CS6R(S80/S30)Voice Editor Import (Import)

This is the same as the “Import” button in the toolbar (Page 13).

CS6x/CS6R(S80/S30)Voice Editor Compare (Compare)

This is the same as the “Compare” button in the toolbar (Page 15).

Windows Macintosh

Setup (Windows) / MIDI (Macintosh)

CS6x/CS6R(S80/S30)Voice Editor Setup (Editor Setup)

This is the same as the “Editor Setup” button in the toolbar (Page 10).

CS6x/CS6R(S80/S30)Voice Editor Transmit Bulk (Transmit)

This is the same as the “Transmit Bulk” button in the toolbar (Page 11).

CS6x/CS6R(S80/S30)Voice Editor Receive Bulk (Receive)

This is the same as the “Receive Bulk” button in the toolbar (Page 12).

CS6x/CS6R(S80/S30)Voice Editor Monitor (Monitor)

This is the same as the “Monitor” button in the toolbar (Page 12).

OMS Port Setup (Macintosh only)

Opens the OMS Port Setup window for Voice Editor. Refer to the section “OMS Port Setup”

(Page 28) for further details.

OMS MIDI Setup (Macintosh only)

Opens the OMS MIDI Setup window. Refer to the documentation that came with OMS for

further details.

OMS Studio Setup (Macintosh only)

Opens the OMS Studio Setup window. Refer to the documentation that came with OMS for

further details.

Windows Macintosh

The Library Window

When you start Voice Editor, you will first see the Library Window consisting of tabs, each

representing a Memory in your CS6x/CS6R/S80/S30 synthesizer. Each tab lists all the names,

numbers and categories of voices in the selected Memory. When you choose to edit a voice

from the Library Window by double-clicking it, the Edit Window for that voice will be opened.

n You can save your settings as a Library file (*.S2V).

1 Toolbar

This area holds the buttons controlling Voice Editor (Page 8).

2 Tabs

Click any of these to view the voice list for that Memory.

3 Voice list

This area shows all the voices in the selected Memory as a scrollable list. The name,

number and Category of each voice are shown. You can rearrange the voices by

dragging-and-dropping their voice numbers to a new location. You can rename a voice in

Windows by selecting the voice name, then clicking on it again to enter a new name. On

the Macintosh, you click on the voice name while holding down [Control], choose “Edit

Voice Name” from the pull-down menu and enter the new name in the dialog.

n To select a continuous block of voices, click the number of the first voice, hold down the [Shift] key,

then click the last number.

n Voice names can consist of up to 10 characters.

Viewing Just the Voice Names (Windows)

You can view just the names of all voices in the Memory without their “Number” and

“Category” information. To do this, right-click on any part of the voice list and choose “List.”

This may be useful when choosing voices quickly, since you will have less scrolling to do.

n To switch back to the full Voice Name/Number/Category list, right-click on any part of the voice list

and choose “Details.”

The Toolbar

1 “Open” button

Click this to open the “Open File” dialog and select a Library file to open.

“Open File” Dialog

n If you are using a Macintosh, the typical Macintosh “Open” dialog will appear.

“Look in:”....................................Click this and choose the folder containing the Voice Editor files.

List box ......................................Shows the contents of the current folder .

[Open] button..............................Click this to open the file selected from the List.

[Cancel] button ..........................Click this to cancel the operation.

“File name:”................................Shows the name of the files selected from the List.

“Files of type:” ............................Click this and choose the file type.

12 345678

2 “Save” button

Click this to save the existing Library file with your new settings. If you are working on a

new file, this button will open the “Save As” dialog, where you can name and save your

settings as a new Library file (*.S2V).

“Save As…” Dialog

n Library file names can consist of up to 8 characters plus a 3-character extension.

n If you are using a Macintosh, the typical Macintosh “Save As” dialog will appear.

“Save in:”....................................Click this and choose the folder in which to save the Library file.

List box ......................................Shows the contents of the folder you wish to save to.

[Save] button ..............................Click this to save the Library file with the name specified in the “File

name:” .

“File name:”................................Specify the name of the Library file to be saved here.

“Files of type:”............................Click this and choose the file type.

3 “Editor Setup” button

Click this to open the “Editor Setup” dialog and specify the MIDI Out port settings.

“Editor Setup” Dialog

This is where you set up the Voice Editor to allow the transmission of voice data to your

CS6x/CS6R/S80/S30 synthesizer. Click the [OK] button to apply the settings and quit the

dialog. Click the [Cancel] button to quit without applying the settings.

1 “MIDI Out Port:” ..........................Click this and choose the MIDI Out port. You can use the Voice Editor to

control and edit the device connected to this port. Select the port which

has been assigned to your CS6x/CS6R/S80/S30 synthesizer within

XGworks(lite).

n If you are using a Macintosh, the MIDI Out Port setting is assigned in the OMS Port Setup. For

further details, see section “OMS Settings.” (Page 27)

“MIDI Ch:” ..................................Click this and choose the MIDI Out channel. This is used when

monitoring sounds using the on-screen keyboard in the Edit Windows.

n Slider and knob values are sent by MIDI System Exclusive, independently of the MIDI Out channel.

“Device No.:” ..............................Click this and choose the MIDI device number of your

CS6x/CS6R/S80/S30 synthesizer.

“Dump Interval:”..........................Click this and choose the interval between successive MIDI dumps.

n If you set too short an interval, you may encounter errors when transmitting MIDI data.

4 “Transmit” button

Click this to open the “Transmit” dialog to transmit all settings to your CS6x/CS6R/S80/S30

synthesizer

“Transmit” Dialog

Voice data can be transmitted in bulk to your CS6x/CS6R/S80/S30 synthesizer. Click the

[Start] button to begin transmitting the data. The progress bar shows how much of the data

has been transmitted. Finally, click the [Close] button to quit the dialog.

n It is not possible to directly send bulk Voice data to the CS6x/CS6R/S80/S30 External.

n To send the External Voice data in the Library Window to the CS6x/CS6R/S80/S30, you must first

temporarily copy the External Voice data to the Internal within Voice Editor.

“Transmit Type” ..........................Shows the voice data to be transmitted (This is fixed to internal only).

Progress bar ..............................Shows how much of the data has been transmitted.

[Start] button ..............................Click this to transmit the data.

[Close] button ............................Click this to close this dialog.

n The MIDI Device Number has to be set correctly in order to transmit bulk data. For further details,

see page 10.

5 “Receive” button

Click this to open the “Receive” dialog to receive all settings from your CS6x/CS6R/S80/S30

synthesizer.

“Receive” Dialog

Voice data can be received in bulk from your CS6x/CS6R/S80/S30 synthesizer. Select the

bulk voice data you wish to receive, then click the [Start] button. The progress bar shows

how much of the data has been received. Finally, click the [Close] button to quit the dialog.

1 “Receive Type” ............................Click this and choose the Voice data (internal/external/all) to receive.

Progress bar ..............................Shows how much of the data has been received.

[Start] button ..............................Click this to receive the data.

[Close] button ............................Click this to close this dialog.

n The MIDI Device Number has to be set correctly in order to receive bulk data. For further details,

see page 10.

6 “Edit Window” button

Click this to open the Edit Window (Common) for the selected voice in the list. For further

details, see page 14.

7 “Monitor” switch

If you click this, bulk voice data will be sent for monitoring on your CS6x/CS6R/S80/S30

synthesizer each time you select a voice. Click it again to disable monitoring.

n To monitor the voice, you need to play your CS6x/S80/S30 synthesizer’s keyboard or the keyboard

connected to your CS6R Synthesizer.

8 “Import” button

Click this to open the “Import” dialog and import voices from an existing Library file. You

can drag-and-drop voices to the Library Window .

n More than one of these dialogs can be opened simultaneously.

“Import” Dialog

1 “File name:”................................Shows the name of the Library file from which you will import voice data.

“Open File” button......................Click this to open the “Open File” dialog and select a Library file to open.

“Memory:” ..................................Click this and choose the Memory from which you will import voice data.

Voice list......................................This area shows all the voices in the selected Memory as a scrollable list,

in order of voice number. You can select a voice here and import it

directly to the voice list in the Library Window by drag-and-drop.

(Multiple voices can also be imported this way.) In Windows, you can

alternatively copy the voice by selecting it and pressing [CTRL]+[C] on

the computer keyboard, and then switch to the Library Window and

press [CTRL]+[V] at the new location to paste (import) it.

n To select a block of voices, click the number of the first voice, hold down the [Shift] key, then click

the last voice .

“Monitor” ....................................If you check this box, the bulk data for each voice you select from the list

will be transferred to your CS6x/CS6R/S80/S30 synthesizer for monitoring.

To monitor the voice, use the keyboard of your CS6x/S80/S30 synthesizer

or the keyboard connected to your CS6R synthesizer.

n Monitoring will not be possible if the MIDI Out port and other parameters in the Editor Setup are not

set correctly. For further details, see page 10.

n You cannot import a Drum Voice to a Normal Voice list or a Normal Voice to a Drum Voice list.

[Close] button ............................Click this to close the Import dialog.

The Edit Window

There are two types of voices you can edit using Voice Editor: Normal Voices and Drum Voices.

In the Library Window, click the tab containing the Normal Voice or Drum Voice that you wish to

edit. Then double-click the voice (or select it and click the “Edit Window” button) to open the

Edit Window.

The Toolbar

This area holds the buttons controlling the Edit Window.

1 “Editor Setup” button

See item 3 in “The Toolbar” of “The Library Window” (Page 10).

2 “Library Window” button

Click this to bring the Library Window back into view.

3 “Store” button

Click this to open the “Store” dialog, where you can name your edited voice and select a

location in which to store it.

“Store” Dialog

1 “Voice Name:” ............................Specify a name for your edited voice.

n Voice names can consist of up to 10 characters.

“Memory:” ..................................Click this and choose the Memory in which to store your edited voice.

1234

3 Voice list......................................Shows the contents of the Memory as a list. Click the voice in which your

edited voice will be stored.

[Store] button..............................Click this to store your edited voice in the location specified above.

After storing to a Library file, the data for the original voice will be overwritten when you save the

Library file. It is recommended that you back up important data.

The “Store” dialog is used to temporarily store your Library file. After storing, save your Library file.

If you do not save your Library file after storing, your edits will not be saved.

[Cancel] button ..........................Click this to quit the dialog without storing.

4 “Compare” switch

If you click this, bulk data for the original voice (prior to editing) will be sent to on your

CS6x/CS6R/S80/S30 synthesizer. Click it again to send the bulk data for your edited voice.

This switch is useful for making A/B comparisons between the original and edited voices.

Voice Edit Window

When editing a voice, you will see the following screen:

The Drum Voice Edit Window is similar to this. However, it has a few less controls and the

“ELEMENT” controls are different, as explained later in “Element Unit” (Page 18).

n For details about each parameter, refer to the CS6x/CS6R/S80/S30 Owner’s Manual.

2 3 4 5 61

)

1 VOICE panel

This shows the name and instrument category of the voice. You can also rename your

edited voice and change the instrument category from the “Voice Category” pull-down

menu.

n Voice names can consist of up to 10 characters.

2 QUICK EDIT panel

This gives you access to the volume, pan, filter and envelope generator controls. The

specific parameters for these controls can be found in the “QUICK EDIT/SCENE

CONTROL” dialog, opened by clicking the [DETAIL] button above the Keyboard area at the

bottom of the window.

n The “SUSTAIN” and “RELEASE” knobs are not available for Drum Voices.

3 PITCH BEND settings

Use these “LOWER” knob to set the lowest point in the pitch bend wheel’s range and the

“UPPER” knob to set the highest point.

4 PORTAMENTO unit

Use the switch to enable/disable portamento and the “TIME” knob to specify the

portamento time. Click on the text box and select the portamento mode.

n The “PORTAMENTO” unit is not available for Drum Voices.

5 ARPEGGIO unit

Use the switch to enable/disable the arpeggiator and the “TEMPO” knob to specify the

arpeggiator speed. Click on the text box below the switch to select the arpeggiator mode .

Click on the text box to the left of the switch to select the arpeggio type. The specific

parameters for the arpeggiator can be found in the “ARPEGGIO” dialog, opened by

clicking the [DETAIL] button.

6 [CTRL SET/COM LFO] button

Click this to open the “CONTROLLER SET /COMMON LFO” dialog. In the top panel, you

can specify the parameters for all controllers such as the pitch bend and modulation

wheels. The bottom panel lets you specify the parameters for the Common LFO.

n The “COMMON LFO” panel is not available for Drum Voices. Also, the “ELEMENT” switches in the

“CONTROLLER SET” panel are not available for Drum Voices.

“CONTROLLER SET/COMMON LFO” Dialog

• CONTROLLER SET Panel

You can assign your CS6x/CS6R/S80/S30 synthesizer’s controllers such as the modulation wheel or

keyboard aftertouch to various parameters to allow them to be modified in real-time. For instance, you

could assign the modulation wheel to the filter’s Resonance parameter. In all, up to six controllers can

be assigned.

1 SOURCE......................................Select the controller from “FS” (footswitch), “FC” (foot controller), “BC”

(breath controller), “AT” (aftertouch), “RB” (ribbon controller), “PB” (pitch

bend wheel), “MW” (modulation wheel), “KN1/2” (Assignable Knob 1/2) .

DEPTH settings ..........................Sets the degree to which the selected controller will affect the parameter

assigned to it.

DESTINATION settings................Click on the text box and choose the parameter you wish to control.

ELEMENT switches ....................Click these to enable/disable the Elements which will be effected by the

controller assignments.

• COMMON LFO Panel

5 LFO WAVE setting ......................Click on the text box and select the LFO waveform.

LFO SPEED setting ....................Click on the text box and set the LFO speed.

LFO PHASE setting ....................Click on the text box and select the LFO phase.

LFO KEY ON RESET setting ......Click on the text box and select the method of restarting the LFO when a

note is played.

DEPTH setting ............................Set the degree to which the selected controller will affect the parameter

assigned to it.

)

DESTINATION settings................Click on the text box and choose the parameter you wish to control.

ELEMENT switches ....................Click these to enable/disable the Elements which will be effected by the

controller assignments.

Editor graph................................Click and drag the square marks (handles) to set the time-dependent

behavior of the Common LFO. The first square mark (furthest to the left)

controls the “LFO Delay Time.” The second controls the “LFO Fade In

Time.” The third controls the “LFO Control Time.” The last square mark

(furthest to the right) controls the “LFO Fade Out Time.” Drag the square

marks horizontally to adjust the transition times.

23 4

9@)!

7 ELEMENT unit

This section is explained in more detail in “Element Unit” (Page 18).

8 INSERTION EFFECT units

This section is explained in more detail in “Insertion Effect” (Page 25).

9 SYSTEM EFFECT settings

This section is explained in more detail in “System Effects” (Page 26).

) Keyboard

Click any key on the keyboard to monitor your edited voice in that key.

! KEY ASSIGN settings

Click on the left text box to select a Key Assign setting. Click on the right text box to select

Monophonic or Polyphonic.

n The “KEY ASSIGN” settings are not available for Drum Voices.

@ MICRO TUNE settings

Click on the text box to select a Micro Tuning preset.

n The “MICRO TUNE” settings are not available for Drum Voices.

# SCENE CONTROL Knob

Use the knob to set the Scene Control (CS6x/CS6R only). Click the [DETAIL] button to

open the “QUICK EDIT/SCENE CONTROL” dialog and specify the Quick Edit/Scene

Control parameters in the “Scene Control” panel.

Element Unit

1 EL (Element) 1 to 4 buttons

Click these to open their “ELEMENT” dialogs.

n For Drum Voices, you will see the following panel. Click [KEY C0...C6] to open the “Drum Key”

dialog (Page 22).

213 4

2 ON/OFF switch

Click these to switch each Element on or off.

3 Element Level knobs

Use these to set the level of each Element.

4 EF (Effect) 1/EF (Effect) 2/Thru switches

Click these to assign each Element to Insertion Effect 1 or Insertion Effect 2, or to by-pass

the Insertion Effect units.

● Element Dialog

The “ELEMENT” controls for Normal Voices differ from those for Drum Voices. The controls

for Normal Voices are accessed from the Edit Window by clicking buttons [EL 1] to [EL 4].

For Drum Voices, you can access the controls from the Edit Window by clicking the “KEY

C0 …C6” button.

1 LFO settings

These control the behavior of the LFO. Click on the “WAVE” text box and select the LFO’s

waveform. Click on the “SPEED” text box and specify its speed. Click on the “KEY SYNC”

text box to switch LFO key sync on or off. (If switched on, the LFO waveform is restarted

each time you play a note.)

1234 56

2 LFO PITCH knob

Use this to set the pitch modulation depth of the LFO. You can also enter a value directly

in the text box to the left of the knob.

3 LFO FILTER knob

Use this to set the filter modulation depth of the LFO. You can also enter a value directly in

the text box to the left of the knob.

4 LFO AMPLITUDE knob

Use this to set the amplitude modulation depth of the LFO. You can also enter a value

directly in the text box to the left of the knob.

5 [DETAIL] button

Click this to open the “EL DETAIL” dialog and enter the parameters for each Element. You

have wider and more accurate control over the parameters than with the editor graphs.

6 Editor graphs

Within these graphs, click and drag the square marks (handles) to visually adjust the

parameters for each Element.

n Sometimes, not all the square marks are visible as they may be layered on top of each other at the

same position. In which case, click the visible square mark and drag it away to reveal the next

square mark.

OSCILLATOR Settings

Click on the “WAVE” text box and choose the source waveform. One of the square marks is

used to set “VEL LIMIT LOW” and “NOTE LIMIT LOW.” Set the lowest note velocity

response by dragging this the square mark horizontally. Set the lowest note in the key range

by dragging it vertically. Similarly, set the highest note velocity (“VEL LIMIT HIGH”) and key

range note (“NOTE LIMIT HIGH”) using the other square mark.

n When dragging the square marks, values are given as (X,Y) co-ordinates, where X is the NOTE LIMIT

(given as a MIDI note number) and Y is the VEL LIMIT. To view the note name instead of the note

number, select the “OSCILLATOR” tab of the “EL DETAIL” dialog.

FILTER Settings

Click on the text box and choose the filter type. The graph shows pre-defined settings

initially, but you can edit these. Using the LPF type as an example, drag the left square

mark vertically to set the Filter Gain. Drag the right square mark horizontally to set the Filter

Cutoff frequency.

n Parameter values are shown when dragging the square marks. To set these values directly, select

the “FILTER EG” tab of the “EL DETAIL” dialog.

Страница загружается...

Yamaha CS6R, CS6X, S30, S80 Инструкция по применению

Похожие модели бренда