Pioneer FH-X730BT Руководство пользователя

English Français Italiano Español Deutsch Nederlands Русский

CD RDS RECEIVER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

FH-X730BT

Owner’s Manual

Mode d’emploi

Manuale d’istruzioni

Manual de instrucciones

Bedienungsanleitung

Handleiding

Руководство пользователя

2En

Before You Start....................................................................................... 3

Getting Started........................................................................................ 3

Radio.......................................................................................................... 5

CD/USB/iPod/AUX................................................................................... 6

Bluetooth.................................................................................................. 8

App Mode............................................................................................... 11

Spotify®................................................................................................... 11

Using Pioneer ARC APP........................................................................ 12

Audio adjustments ............................................................................... 13

Settings ................................................................................................... 14

FUNCTION settings .............................................................................. 14

AUDIO settings...................................................................................... 15

SYSTEM settings ................................................................................... 16

ILLUMINATION settings....................................................................... 17

MIXTRAX settings................................................................................. 18

Connections/Installation ..................................................................... 18

Additional Information ........................................................................ 21

About this manual:

• In the following instructions, a USB memory or USB audio player are referred to as

“USB device”.

• In this manual, iPod and iPhone are referred to as “iPod”.

Table of Contents

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC

English:

Hereby, Pioneer, declares that this FH-X730BT is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

Suomi:

Pioneer vakuuttaa täten että FH-X730BT tyyppinen laite

on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä

koskevien direktiivin muiden ehtojen mukainen.

Nederlands:

Hierbij verklaart Pioneer dat het toestel FH-X730BT in

overeenstemming is met de essentiële eisen en de andere

relevante bepalingen van richtlijn 1999/5/EG

Français:

Par la présente Pioneer déclare que l’appareil FH-X730BT

est conforme aux exigences essentielles et aux autres

dispositions pertinentes de la directive 1999/5/CE

Svenska:

Härmed intygar Pioneer att denna FH-X730BT står I

överens-stämmelse med de väsentliga egenskapskrav

och övriga relevanta bestämmelser som framgår av

direktiv 1999/5/EG.

Dansk:

Undertegnede Pioneer erklærer herved, at følgende

udstyr FH-X730BT overholder de væsentlige krav og

øvrige relevante krav i direktiv 1999/5/EF

Deutsch:

Hiermit erklärt Pioneer, dass sich dieses Gerät FH-

X730BT in Übereinstimmung mit den grundlegenden

Anforde-rungen und den anderen relevanten

Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi)

Ελληνικά:

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Pioneer ΔΗΛΩΝΕΙ ΟΤΙ FH-X730BT

ΣΥΜ-ΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ

ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ

1999/5/ΕΚ

Italiano:

Con la presente Pioneer dichiara che questo FH-X730BT è

conforme ai requisiti essenziali ed alle altre disposizioni

pertinenti stabilite dalla direttiva 1999/5/CE.

Español:

Por medio de la presente Pioneer declara que el FH-

X730BT cumple con los requisitos esenciales y

cualesquiera otras disposiciones aplicables o exigibles

de la Directiva 1999/5/CE

Português:

Pioneer declara que este FH-X730BT está conforme com

os requisitos essenciais e outras disposições da Directiva

1999/5/CE.

Čeština:

Pioneer tímto prohlašuje, že tento FH-X730BT je ve

shodě se základními požadavky a dalšími příslušnými

ustanove-ními směrnice 1999/5/ES

Eesti:

Käesolevaga kinnitab Pioneer seadme FH-X730BT

vastavust direktiivi 1999/5/EÜ põhinõuetele ja

nimetatud direktiivist tulenevatele teistele

asjakohastele sätetele.

Magyar:

Alulírott, Pioneer nyilatkozom, hogy a FH-X730BT

megfelel a vo-natkozó alapvetõ követelményeknek és az

1999/5/EC irányelv egyéb elõírásainak.

Latviešu valoda:

Ar šo Pioneer deklarē, ka FH-X730BT atbilst Direktīvas

1999/5/EK būtiskajām prasībām un citiem ar to

saistītajiem noteikumiem.

Lietuvių kalba:

Šiuo Pioneer deklaruoja, kad šis FH-X730BT atitinka

esminius reikalavimus ir kitas 1999/5/EB Direktyvos

nuostatas.

Malti:

Hawnhekk, Pioneer jiddikjara li dan FH-X730BT

jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti

oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC

Slovenčina:

Pioneer týmto vyhlasuje, že FH-X730BT spĺňa základné

požiadavky a všetky príslušné ustanovenia Smernice

1999/5/ES.

Slovenščina:

Pioneer izjavlja, da je ta FH-X730BT v skladu z bistvenimi

zahtevami in ostalimi relevantnimi določili direktive

1999/5/ES.

Română:

Prin prezenta, Pioneer declara ca acest FH-X730BT este

in conformitate cu cerintele esentiale si alte prevederi

ale Directivei 1999/5/EU.

български:

С настоящето, Pioneer декларира, че този FH-X730BT

отго-варя на основните изисквания и други

съответни постановления на Директива 1999/5/EC.

Polski:

Niniejszym Pioneer oświadcza, że FH-X730BT jest

zgodny z zasadniczymi wymogami oraz pozostałymi

stosownymi postanowieniami Dyrektywy 1999/5/EC

Norsk:

Pioneer erklærer herved at utstyret FH-X730BT er i

samsvar med de grunnleggende krav og øvrige

relevante krav i direktiv 1999/5/EF.

Íslenska:

Hér með lýsir Pioneer yfir því að FH-X730BT er í samræmi

við grunnkröfur og aðrar kröfur, sem gerðar eru í

tilskipun 1999/5/EC

Hrvatski:

Ovime tvrtka Pioneer izjavljuje da je ovaj FH-X730BT u

skladu osnovnim zahtjevima i ostalim odredbama

Direktive 1999/5/EC.

Türkçe:

Bu vesile ile, PIONEER, bu FH-X730BT için 1999/5/EC

Direktifinin esas şartları ve diğer ilgili hükümlerine

uygunluğu beyan eder.

Manufacturer:

PIONEER CORPORATION

28-8, Honkomagome 2-chome,

Bunkyo-ku, Tokyo 113-0021, Japan

EU Representative’s:

Pioneer Europe NV

Haven 1087, Keetberglaan 1,

B-9120 Melsele, Belgium/Belgique

http://www.pioneer-car.eu

3En

English

Thank you for purchasing this PIONEER product

To ensure proper use, please read through this manual before using this product. It is especially

important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the

manual in a safe and accessible place for future reference.

Private households in the member states of the EU, in Switzerland and Norway may return their used

electronic products free of charge to designated collection facilities or to a retailer (if you purchase a

similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of

disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human health.

WARNING

•Do not attempt to install or service this product by yourself. Installation or servicing of this

product by persons without training and experience in electronic equipment and automotive

accessories may be dangerous and could expose you to the risk of electric shock, injury or other

hazards.

•Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle

in a safe location before attempting to use the controls on the device.

CAUTION

•Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result.

Also, damage to this unit, smoke, and overheating could result from contact with liquids.

•Always keep the volume low enough to hear outside sounds.

•The Pioneer CarStereo-Pass is for use only in Germany.

•This product is evaluated in moderate and tropical climate condition under the Audio, video and

similar electronic apparatus - Safety requirements, IEC 60065.

Before You Start

If you want to dispose this product, do not mix it with general household waste. There is a separate

collection system for used electronic products in accordance with legislation that requires proper

treatment, recovery and recycling.

CAUTION

This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007.

If you experience problems

Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service

Station.

FH-X730BT

Optional remote control

The remote control CD-SR110 is sold separately.

Frequently used operations

Getting Started

Basic operation

Purpose Operation

Turn on the power* Press SRC

/OFF to turn on the power.

Press and hold SR

C/OFF to turn off the

power.

Adjust the volume Turn the M.

C. dial.

SRC (source)/OFF

Display window

M.C. (multi-control) dial

BAND/

DISP (display)

4En

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal,

the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the

source off.

Display indication

The microprocessor must be reset in the following situations:

– Before using this unit for the first time after installation

– If the unit fails to operate properly

– When strange or incorrect messages appear on the display

1 Press the RESET button with a pen tip or other pointed instrument.

Select a source Press SRC/OFF repeatedly.

Change the display information Press DIS

P repeatedly.

Return to the previous display/list Press BAND/ .

Return to the normal display from the menu Press and hold BAND/ .

Answering/ending a call Press .

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when a Bluetooth telephone is connected to this unit by HFP

(H

ands Free Profile) (page 8) and flashes while the telephone is on hold.

Appears when a Bluetooth audio player is connected to this unit by A2DP

(A

dvanced Audio Distribution Profile) (page 8).

Appears when the button is pressed.

Appears when a traffic program is received.

Appears when the TA (traffic announcements) function is set (page 14).

Appears when the sound retriever function is set (page 15).

Appears when random/shuffle play is set (except when BT AUDIO is

se

lected as the source).

Appears when repeat play is set (except when BT AUDIO is selected as the

so

urce).

Appears when the iPod control function is set (page 8).

Appears when a Bluetooth connection is made (page 8).

Resetting the microprocessor

Purpose Operation

When you turn the ignition switch to ON after installation, the setup menu appears in

the display.

WARNING

Do not use the unit in standard mode when a speaker system for network mode is connected to the

unit. Do not use the unit in network mode when a speaker system for standard mode is connected to

the unit. This may cause damage to the speakers.

1 Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

Setup menu

Menu Item Description

LANGUAGE Select the language to display the text information from a

co

mpressed audio file.

[ENG](English),

[РУС

](Russian),

[TUR](Turkish)

CLOCK SET Set the clock.

1 Tu

rn the M.C. dial to adjust the hour, then press to confirm.

The indicator moves to the minute setting automatically.

2 Tu

rn the M.C. dial to adjust the minute, then press to confirm.

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

RESET button

5En

English

2 [QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.

C. dial to select [QUIT :NO],

then press to confirm.

3 Press the M.C. dial to confirm the settings.

NOTE

These settings other than [SPEAKER MODE] can be made at any time from the SYSTEM settings

(page 16) and INITIAL settings (page 5).

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

4 Turn the M.C. dial to select [YES], then press to confirm.

1 Press and hold SRC/OFF until the unit turns off.

2 Press and hold SRC/OFF to display the main menu.

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

4 Turn the M.C. dial to select an option, then press to confirm.

SPEAKER MODE Switch between two operation modes: the 2-way network mode

(NETWORK) and the standard mode (STANDARD) according to

the connections you have established. For details on operation

modes, see page 13.

After selecting the appropriate mode, turn the M.

C. dial to

select [YES], then press to confirm.

• Y

ou cannot complete the setup menu without setting the

[SPEAKER MODE].

• On

ce the speaker mode is set, this setting cannot be changed

unless the default settings of this product are restored. Restore

the default settings to change the speaker mode setting (refer

to SYSTEM RESET on page 5).

[STANDARD],

[NE

TWORK]

Canceling the demonstration display (DEMO OFF)

INITIAL settings

Menu Item Description

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS

(radio data system) function only works in areas that broadcast RDS signals for FM

stations.

1 Press SRC/OFF to select [RADIO].

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].

3 Press a number button (1/ to 6/ ).

NOTE

You can select a preset channel by pressing and turning the M.C. dial.

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the

FUNCTION settings (page 14).

Menu Item Description

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

REAR-SP Select when there is a full-range speaker connected to the rear

sp

eaker output leads.

[FUL]

[SW] Select when there is a subwoofer connected directly to the rear

speaker output leads without any auxiliary amplifier.

SYSTEM UPDATE Select [SYSTEM INFO] to confirm the latest system information

on

the unit.

Select [S/W UPDATE] to update the unit to the latest software

and

initialize the unit settings. For details on the latest software

and updating, visit our website.

[SYSTEM INFO], [S/

W UPDATE]

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

restarted automatically.

(Some of the settings may be retained even after resetting the

unit

.)

[YES], [CANCEL]

Radio

Receiving preset stations

6En

The six strongest stations are stored on the number buttons (1/ to 6/ ).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1 After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops

when the unit receives a station. To cancel seek tuning, press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 14).

To store stations manually

1 While receiving the station you want to store, press and hold one of the number

buttons (1/ to 6/ ) until it stops flashing.

NOTE

You can select a preset channel by pressing and turning the M.C. dial. After selecting a channel,

press and hold the M.C. dial to store a station.

The unit searches for a station by PTY (program type) information.

1 Press and hold during FM reception.

2 Turn the M.C. dial to select a program type from [NEWS/INFO], [POPULAR],

[CLASSICS] or [OTHERS].

3 Press the M.C. dial.

The unit begins to search for a station. When it is found, its program service name is

displa

yed.

NOTES

• To cancel the search, press the M.C. dial.

• The program of some stations may differ from that indicated by the transmitted PTY.

• If no station is broadcasting the type of program you searched for, [NOT FOUND] is displayed for

about two seconds and then the tuner returns to the original station.

Best stations memory (BSM)

Using PTY functions

PTY list

For more details about PTY list, visit the following site:

http://www.pioneer.eu/eur/products/25/121/tech/CarAudio/PTY.html

Disconnect headphones from the device before connecting it to the unit.

CD

1 Insert a disc into the disc loading slot with the label side up.

To eject a disc, stop playback first then press .

USB devices (including Android™)/iPod

1 Open the USB port cover.

2 Plug in the USB device/iPod using an appropriate cable.

CD/USB/iPod/AUX

Playing back

AUX input jack (3.5 mm stereo jack)

(eject)

Disc loading slot

USB port

SRC (source)/OFF

M.C. (multi-control) dial

7En

English

NOTE

To automatically switch to [USB] source when a USB device/iPod is connected to the unit, set [USB

AUTO] to [ON] in the SYSTEM settings (page 17).

CAUTION

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected

directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 12.

MTP connection

A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable

supplied with the device. However, depending on the connected device and the numbers of the files in

the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is

not compatible with WAV file formats and FLAC file formats, and cannot be used with the MIXTRAX

function.

NOTE

If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the SYSTEM settings

(page 17).

AUX

1 Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 16).

You can make various adjustments in the FUNCTION settings (page 14).

Note that the following operations do not work for an AUX device. To operate an AUX

d

evice, use the device itself.

Operations

Purpose Operation

Select a folder/album*1 Press 1/ or 2/ .

Select a track/song (chapter) Press or .

Fast forward or reverse*2 Press and hold or .

*1 Compressed audio files only

*2 When you use the fast forward or reverse function while playing a VBR file, the playback time may

be not correct.

Link play mode

You can access songs based on the artist, album, or genre currently playing.

1 While listening to a song, press and hold to enter the link play mode.

Search for a file from a list 1 Press to display the list.

2 Tu

rn the M.C. dial to select the desired

file (folder) name or category, then press

to confirm.

3 Tu

rn the M.C. dial to select the desired

file, then press to confirm.

Playback starts.

View a list of the files in the selected folder/

category*1

Press the M.C. dial when a folder/category

is selected.

Play a song in the selected folder/

cat

egory*1

Press and hold the M.C. dial when a folder/

category is selected.

Alphabetical search (iPod only) 1 Pr

ess to display the list.

2 Tu

rn the M.C. dial to select the desired

category list, then press to enter the

alphabetical search mode.

(Turning the M.

C. dial twice also enters

the alphabetical search mode.)

3 Tu

rn the M.C. dial to select a letter, then

press to display the alphabetical list.

To cancel alphabetical search, press BAN

D/

.

Repeat play Press 6/ .

Random/shuffle play Press 5/ .

Shuffle all play (iPod only) Press and hold 5/ .

Pause/resume playback Press 4/PA

USE.

Return to root folder (CD/USB only)*1 Press and hold .

Switch between compressed audio and CD-

DA (CD only)

Press BAND/ .

Useful functions for iPod

Purpose Operation

8En

2 Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to

confirm.

The selected song/album will be played after the currently playing song.

NOTE

The selected song/album may be canceled if you use functions other than those from the link play

mode (e.g. fast forward and reverse).

iPod control

You can control the unit via a connected iPod.

The following iPod models are not compatible with this function.

–iPod nano 1st generation, iPod with video

1 Press BAND/ during playback, then select the control mode.

[CO

NTROL iPod]: The unit’s iPod function can be operated from the connected iPod.

[CO

NTROL AUDIO]: The unit’s iPod function can only be operated by the buttons on

the unit. In this mode, the connected iPod cannot be turned on or off.

NOTES

• Switching the control mode to [CONTROL iPod] pauses song playback. Use the connected iPod to

resume playback.

• The following operations are still accessible from the unit, even if the control mode is set to

[CONTROL iPod].

– Pause, fast forward/reverse, song/chapter selection

• The volume can only be adjusted from the unit.

The MIXTRAX function creates a non-stop mix of your music library, accompanied by

illumination effects. For details on MIXTRAX settings, see page 18.

NOTES

• This function is not compatible with an Android device connected via MTP.

• Depending on the file/song, sound effects may not be available.

• Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.

1 Press 3/MIX to turn MIXTRAX on/off.

About MIXTRAX (USB/iPod only)

Important

If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may

not work properly.

1 Turn on the Bluetooth function of the device.

2 Press to display the phone menu.

3 Turn the M.C. dial to select [BT SETTING], then press to confirm.

4 Turn the M.C. dial to select [ADD DEVICE], then press to confirm.

The unit starts to search for available devices, then displays them in the device list.

• T

o cancel searching, press the M.C. dial.

• If

the desired device is not in the list, select [RE-SEARCH].

• If the

re is no device available, [NOT FOUND] appears in the display.

5 Turn the M.C. dial to select a device from the device list, then press to confirm.

Press and hold the M.

C. dial to switch the displayed device information between the

Bluetooth device address and device name.

6 Select [Pioneer BT Unit] shown in the device display.

7 Make sure the same 6-digit number appears on this unit and the device, then

select “Yes” on the device.

NOTES

• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete

one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the Bluetooth settings (page 8).

• Depending on the device, the PIN code is required in step 7. In this case, input [0000].

TIP

The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,

[VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations,

refer to the operating instructions supplied with the Bluetooth device.

Bluetooth settings

Bluetooth

Bluetooth connection

Menu Item Description

DEVICELIST Display the list of paired Bluetooth devices. “*” appears on the

d

evice name when the Bluetooth connection is established.

9En

English

First, make a Bluetooth connection with the Bluetooth telephone (page 8). Up to two

Bluetooth telephones can be connected simultaneously.

Important

• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running

can drain the vehicle’s battery.

• Be sure to park your vehicle in a safe place and apply the parking brake before operation.

To make a phone call

1 Press to display the phone menu.

When two phones are connected, a phone name appears first then a phone menu

wi

ll display. To switch to another phone, press again.

DEL DEVICE Delete the device information.

[DELETE YES],

[

DELETE NO]

ADD DEVICE Register a new device.

A.CONN Select [ON] to connect to a Bluetooth device automatically.

[ON], [OFF]

VISIBLE Select [ON] so that a Bluetooth device can detect the unit when

th

e unit is connected via Bluetooth to another device.

[ON], [OFF]

PIN CODE Change the PIN code.

1 P

ress the M.C. dial to display the setting mode.

2 Tu

rn the M.C. dial to select a number.

3 P

ress the M.C. dial to move the cursor to the next position.

4 Af

ter inputting the PIN code, press and hold the M.C. dial.

After inputting the PIN code, pressing the M.

C. dial returns you

to the PIN code input display, and you can change the PIN code.

DEV. INFO Switch the device information on the display between the

d

evice name and Bluetooth device address.

GUEST MODE Select [ON] to move to the [DEL DEVICE] screen automatically

when the unit has already been paired with three devices.

[ON], [OFF]

A.PAIRING Select [ON] to pair the unit and iPhone automatically when an

iP

hone is connected to the unit via USB. (This function may not

be available depending on the version of iOS you are using.)

[ON], [OFF]

Bluetooth telephone

Menu Item Description

2 Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm.

If you select [PHONE BOOK], proceed to step 4.

3 Turn the M.C. dial to select [MISSED], [DIALLED] or [RECEIVED], then press to

confirm.

4 Turn the M.C. dial to select a name or phone number, then press to confirm.

The phone call starts.

To answer an incoming call

1 Press when a call is received.

TIP

When two phones are connected to the unit via Bluetooth and there is an incoming call while one

phone is being used for a call, a message will appear in the display. To answer that incoming call, you

need to end the existing call.

Basic operations

To preset phone numbers

1 Select a phone number from a phone book or call history.

2 Press and hold one of the number buttons (1/ to 6/ ).

The contact is stored in the selected preset number.

To make a call using a preset number, press one of the number buttons (1/ to 6/ ),

then press the M.

C. dial.

Voice recognition (Only for iPhone)

This function is only available when an iPhone equipped with voice recognition is

connected to the unit via Bluetooth.

Purpose Operation

End a call Press .

Reject an incoming call Press and hold when a call is received.

Switch between the current caller

and

a caller on hold

Press the M.C. dial.

Cancel a caller on hold Press and hold .

Adjust the volume of the caller’s

vo

ice (When private mode is on,

this function is not available.)

Turn the M.C

. dial during the call.

Turn the privacy mode on or off Press BAND/ during the call.

10En

1 Press and hold to activate the voice recognition mode.

2 Press the M.C. dial and then talk into the microphone to input voice commands.

To exit the voice recognition mode, press BAN

D/ .

NOTE

For details on the voice recognition features, refer to the manual supplied with your iPhone.

Phone menu

Menu Item Description

RECENTS Display the missed call history.

[MISSED]

[DIALLED] Display the dialed call history.

[RECEIVED] Display the received call history.

PHONE BOOK*1 Display the contacts which have been transferred from your

p

hone. Set [VISIBLE] in the Bluetooth settings to [ON] to browse

the contacts via this unit.

PRESET 1-6 Recall the preset phone numbers. You can also recall the preset

phone numbers by pressing one of the number buttons (1/

to 6/ ).

A.ANSR*2 Select [ON] to answer an incoming call automatically.

[ON], [OFF]

R.TONE Select [ON] if the ring tone does not come out from the car

speakers. Depending on the connected phone, this function

may not work.

[ON], [OFF]

PB INVT Invert the order of names in the phone book (name view).

PB A.SYNC Select whether or not to transfer the contacts from your phone

aut

omatically when your phone is connected to the unit.

• W

hen connected for the first time, the contacts from your

phone are transferred automatically, regardless of the [PB

A.SYNC] setting.

• If

you switch from [ON] to [OFF], the auto synchronization will

not be performed on the next connection.

• I

f you switch from [OFF] to [ON], the auto synchronization will

be performed when your phone is connected to the unit.

• Dur

ing the auto synchronization, you cannot cancel the

synchronization, even if you select [OFF].

[ON], [OFF]

BT SETTING You can adjust various settings for Bluetooth connections. For

de

tails on Bluetooth settings, see page 8.

*1 The contacts on your phone will normally be transferred automatically when the phone is

connected. If they are not, use your phone to transfer the contacts.

*2 If two phones are connected, this function does not work on incoming calls that are received while

one of the phones is being used for a call.

Important

• Depending on the Bluetooth audio player connected to this unit, the available operations will be

limited to the following two levels:

– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.

– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select

song, etc.

• The sound of the Bluetooth audio player will be muted when the phone is in use.

• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone

automatically.

• Depending on the type of Bluetooth audio player you have connected to this unit, operation and

information displayed may vary based on availability and functionality.

1 Make a Bluetooth connection with the Bluetooth audio player.

2 Press SRC/OFF to select [BT AUDIO] as the source.

3 Press BAND/ to start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 14).

* Depending on the connected device, these operations may not be available.

Bluetooth audio

Purpose Operation

Fast forward or reverse Press and hold or .

Select a track Press or .

Repeat play* Press 6/ .

Random play* Press 5/ .

Pause/resume playback Press 4/PA

USE.

Search for a file from a list 1 P

ress to display a list.

2 Tu

rn the M.C. dial to select the desired

folder name, then press to confirm.

3 Tu

rn the M.C. dial to select the desired

file, then press to confirm.

Playback starts.

11En

English

You can enjoy listening to an application on an iPhone/Android device via the unit. In

some cases, you can control an application by using the unit.

For details on compatible devices, visit our website.

Important

Use of third party apps may involve or require the provision of personally identifiable information,

whether through the creation of a user account or otherwise, and for certain applications, the provision

of geolocation data.

ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT

LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES. BY ACCESSING

THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE

PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT

CONSENT TO THE USE OF GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY

APP.

For iPhone users

This function is compatible with iPhones and iPod touches installed with iOS 5.0 or later.

For Android device users

This function is compatible with devices that have Android OS 2.3 or later installed.

NOTE

PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION

THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE

SOLE RESPONSIBILITY OF THE APP PROVIDER.

1 Connect this unit with the mobile device.

• iP

hone via USB (page 6)

• i

Phone/Android device via Bluetooth (page 8)

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [SYSTEM], then press to confirm.

4 Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.

5 Turn the M.C. dial to select one of the below, then press to confirm.

• S

elect [IPHONE/IPOD] for iPhone.

• Se

lect [ANDROID] for Android device.

6 Turn the M.C. dial to select one of the below.

• Se

lect [WIRED] for the USB connection.

• S

elect [BLUETOOTH] for the Bluetooth connection.

App Mode

Playback of an application via the unit

NOTE

When the connection setting is changed, a message that lets you know that the connection

setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to

select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is

executed.

7 Press SRC/OFF to select [APP].

8 Operate the mobile device to start up the application.

Basic operations

You can make various adjustments in the FUNCTION settings (page 14).

Spotify is a music streaming distribution service not affiliated with Pioneer. More

i

nformation is available at http://www.spotify.com.

The Spotify application is available for iPhone and Android phones, please visit https://

sup

port.spotify.com/ for the latest compatibility information.

To enjoy Spotify as you drive, first download the Spotify app to your iPhone or Android

device

. You can download it on the iTunes App Store or Google Play™. Choose a free

account or a paid Premium account, either in the app or at spotify.com. A Premium

account gives you more features, like offline listening.

Important

• This product incorporates Spotify software which is subject to 3rd party licenses found here:

www.spotify.com/connect/third-party-licenses.

• For information on the countries and regions where Spotify can be used, take a look at https://

www.spotify.com/us/select-your-country/.

Update the firmware of the Spotify application to the latest version before use.

1 Connect this unit with the mobile device.

• i

Phone via USB (page 6)

• i

Phone/Android device via Bluetooth (page 8)

If you choose a USB connection, proceed to step 6.

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press BA

ND/ .

Spotify®

Listening to Spotify

12En

2 Press SRC/OFF to select [SPOTIFY].

3 Press and hold BAND/ to display [PHONE CONNECT].

4 Turn the M.C. dial to select one of the below, then press to confirm.

• S

elect [IPHONE/IPOD] for iPhone.

• Se

lect [ANDROID] for Android device.

5 Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via

Bluetooth.

NOTE

When the connection setting is changed, a message that lets you know that the connection

setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to

select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is

executed.

6 Press SRC/OFF to select [SPOTIFY].

7 Launch the Spotify application on the mobile device and start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 14).

NOTE

The available operations may vary according to the type of contents (track/album/artist/playlist/radio)

you want to play.

Purpose Operation

Skip a track Press or .

Search for a track from a list 1 Press (list) to display the list.

2 Tu

rn the M.C. dial to select the desired

category, then press to confirm.

3 Tu

rn the M.C. dial to select the desired

file, then press to confirm.

Playback starts.

Pause/resume playback Press 4/

PAUSE.

Thumbs Up (Only for radio) Press 1/ .

Thumbs Down (Only for radio) Press 2/ .

Random play (Only for track/album/artist/

pl

aylist)

Press 5/ .

Repeat play (Only for track/album/artist/

pl

aylist)

Press 6/ .

NOTE

Some functions of Spotify may not be operated from the unit.

You can operate the unit from Pioneer ARC APP installed on an iPhone/Android device.

In some cases, you can control aspects of the application, such as source selection,

pause, etc., by using the unit.

For details on what operations are available on the application, see the application’s help

sec

tion.

WARNING

Do not attempt to operate the application while driving. Make sure to pull off the road and park your

vehicle in a safe location before attempting to use the controls on the application.

For iPhone users

This function is compatible with iPhones (iPhone 5 or later) and iPod touches installed

wit

h iOS 8.0 or later.

You can download Pioneer ARC APP on iTunes App Store.

For Android device users

This function is compatible with devices that have Android OS 4.1 or later installed and

also sup

port AOA (Android Open Accessory) 2.0.

You can download Pioneer ARC APP on Google Play.

NOTE

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own

software design, regardless of the OS version.

1 Connect this unit with the mobile device.

• i

Phone/Android device via USB (page 6)

• i

Phone/Android device via Bluetooth (page 8)

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [SYSTEM], then press to confirm.

Start a radio channel based on the song

currently being played.

1 Press and hold (list) to start a radio.

2 P

ress the M.C. dial.

• This f

unction may not be available

depending on the selected song.

Using Pioneer ARC APP

Making a connection with Pioneer ARC APP

Purpose Operation

13En

English

4 Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.

5 Turn the M.C. dial to select one of the below, then press to confirm.

• S

elect [IPHONE/IPOD] for iPhone.

• Se

lect [ANDROID] for Android device.

6 Turn the M.C. dial to select one of the below.

• Se

lect [WIRED] for the USB connection.

• S

elect [BLUETOOTH] for the Bluetooth connection.

Proceed to step 10 if you select the USB connection for iPhone or the Bluetooth

co

nnection.

NOTE

When the connection setting is changed, a message that lets you know that the connection

setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to

select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is

executed.

7 Repeat steps 2 to 3.

8 Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.

9 Turn the M.C. dial to select [APP CONTROL] for an Android device connected via

USB.

If [ON] is selected in [P.APP AUTO ON] (page 17), Pioneer ARC APP on the Android

device starts automatically, and all the steps are finished.

NOTE

If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you

to install the application will appear on your Android device. Select [OFF] in [P.APP AUTO ON] to

clear the message (page 17).

10Press SRC/OFF to select any source.

11Launch Pioneer ARC APP on the mobile device.

NOTE

You can also launch the application by pressing and holding the M.C. dial if you select the USB

connection for iPhone or the Bluetooth connection.

1 Press SRC/OFF to select [ANDROID].

Listening to music on Android

Basic operations

You can also make various adjustments in the AUDIO settings (page 15).

This unit features two operation modes: network mode and standard mode. You can

swi

tch between modes as desired (page 5).

Network mode

You can create a 2-way + SW multi-amp and multi-speaker system with high range

speaker, middle range speaker and subwoofer for reproduction of high, middle and low

frequencies (bands).

Standard mode

You can create a 4-speaker system with front and rear speakers or front speakers and

subwoofers, or a 6-speaker system with front and rear speakers and subwoofers.

You can adjust the cut-off frequency value and the slope value of each speaker.

The following speakers can be adjusted.

Network mode:

[HIGH] (high-range speaker HPF), [MID HPF] (middle-range speaker HPF), [MID LPF]

(

middle-range speaker LPF), [SUBWOOFER]

Standard mode:

[FRONT], [REAR], [SUBWOOFER]

NOTE

[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 15).

1 Press the M.C. dial to display the main menu.

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press 4/PA

USE.

Audio adjustments

Operation modes

Adjusting the cut-off frequency value and the slope

value

14En

2 Turn the M.C. dial to select [AUDIO], then press to confirm.

3 Turn the M.C. dial to select [CROSSOVER], then press to confirm.

4 Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then press to

confirm.

5 Turn the M.C. dial to select [HPF] or [LPF] according to the speaker unit (filter),

then press to confirm.

6 Turn the M.C. dial to select an appropriate cut-off frequency for the speaker unit

(filter) selected in step 4, then press to confirm.

Network mode:

[1.25K] to [12.5K] (if you choose [HIGH] or [MID LPF])

[25] to [250] (if you choose [MID HPF] or [SUBWOOFER])

Standard mode:

[50HZ] to [200HZ]

7 Turn the M.C. dial to select an appropriate slope for the speaker unit (filter)

selected in step 4.

Network mode:

[–6] to [–24] (if you choose [HIGH], [MID HPF] or [MID LPF])

[–12] to [–36] (if you choose [SUBWOOFER])

Standard mode:

[–6] to [–24]

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select one of the categories below, then press to confirm.

• FUNCTION settings (page 14)

• AUDIO settings (page 15)

• SYSTEM settings (page 16)

• ILLUMINATION settings (page 17)

• MIXTRAX settings (page 18)

3 Turn the M.C. dial to select the options, then press to confirm.

Settings

The menu items vary according to the source.

FUNCTION settings

Menu Item Description

FM SETTING

[TALK], [STANDARD], [MUSIC] Match the sound quality level with the broadcast

s

ignal conditions of the FM band signal.

(Available only when FM band is selected.)

BSM

Store the six strongest stations on the number

but

tons (1/ to 6/ ) automatically.

REGIONAL

[ON], [OFF] Limit the reception to the specific regional

programs when AF (alternative frequencies

search) is selected. (Available only when FM

band is selected.)

LOCAL

FM: [O

FF], [LV1], [LV2], [LV3], [LV4]

MW/LW: [O

FF], [LV1], [LV2]

Restrict the tuning station according to the

sig

nal strength.

TA

[ON], [OFF] Receive current traffic information if available.

(

Available only when FM band is selected.)

AF

[ON], [OFF] Allow the unit to retune to a different frequency

p

roviding the same station. (Available only when

FM band is selected.)

NEWS

[ON], [OFF] Interrupt the currently selected source with

news

programs. (Available only when FM band is

selected.)

SEEK

[MAN], [PCH] Assign or buttons to seek the stations

one by one (manual tuning) or select a station

f

rom the preset channels.

SAVE

Store the information about the song currently

bein

g played to your music list on Spotify.

15En

English

UNSAVE

Remove the song information stored in [SAVE].

SEL DEVICE

Connect a Bluetooth device in the list.

S.RTRV

[1] (effective for low compression

ra

tes),

[2] (effective for high

co

mpression rates),

[OFF]

Enhance compressed audio and restore rich

so

und.

AUDIO BOOK

[FASTER], [NORMAL], [SLOWER] Change the playback speed. (Not available when

[C

ONTROL iPod] is selected in the control mode.)

PAU SE

Pause or resume playback.

PLAY

Start playback.

STOP

Stop playback.

AUDIO settings

Menu Item Description

EQ SETTING

[SUPER BASS], [POWERFUL],

[NATURAL], [VOCAL], [CUSTOM1],

[CUSTOM2], [FLAT]

Select an equalizer band and

level for further customizing.

Equalizer band: [50HZ

] to

[12.5kHZ]

Equalizer level:

[–6] to [+6]

Select or customize the equalizer curve.

• Wh

en you select a setting other than

[CUSTOM1] and [CUSTOM2], you can also

customize the equalizer curve by pressing and

holding the M.C. dial, then store the

customized equalizer curve in [CUSTOM1].

FADER*

1 (Only for standard mode)

Adjust the front and rear speaker balance.

Menu Item Description

iPod

USB

iPod

AUX

iPod

BALANCE

Adjust the left and right speaker balance.

SUBWOOFER

[ON], [OFF] Set to [ON] when using a subwoofer speaker.

SUBWOOFER*2

[NOR], [REV] Select the subwoofer phase.

SPEAKER LEVEL

Network mode: [

HIGH L], [HIGH

R], [MID L], [MID R], [SUBWOOFER]

Standard mode: [F

RONT L],

[FRONT R], [REAR L], [REAR R],

[SUBWOOFER]

Output level: [–24] t

o [10]

Select a speaker unit (filter) and adjust the

o

utput level.

• E

ach value you have adjusted changes when

you change the [POSITION] setting (page 15).

CROSSOVER

Select a speaker unit (filter) to adjust the HPF or

LPF

cut-off frequency and the slope for each

speaker unit.

For details on the [CROSSOVER] setting, see

page 13.

POSITION

[OFF], [FRONT LEFT] (front seat

left), [FRONT RIGHT] (front seat

right), [FRONT] (front seats), [ALL]*

* Only for standard mode

Select a listening position to adjust the speakers'

o

utput levels automatically and add a delay time

that corresponds to the number and locations of

occupied seats.

TIME ALGNMNT

[INITIAL], [OFF], [CUSTOM]

Select a type of speaker and

ad

just the speaker distance for

further customizing in [CUSTOM].

Network mode: [

HIGH L], [HIGH

R], [MID L], [MID R], [SUBWOOFER]

Standard mode: [F

RONT L],

[FRONT R], [REAR L], [REAR R],

[SUBWOOFER]

Speaker distance (cm): [3

50] to

[0.0]

Select or customize the time alignment settings

t

o reflect the distance between the listener’s

position and each speaker.

• S

elect [INITIAL] to initialize the setting value.

• S

elect [OFF] to reset all setting values to 0.

• Th

e [CUSTOM] setting is available when

[FRONT LEFT] or [FRONT RIGHT] is selected in

[POSITION] (page 15).

• Th

e [CUSTOM] setting is not available when

[OFF] is selected in [SUBWOOFER] (page 15).

Menu Item Description

16En

*1 Not available when [SW] is selected in [REAR-SP] in the INITIAL settings (page 5).

*2 Not available when [FUL] is selected in [REAR-SP] in the INITIAL settings (page 5).

You can also access to these menus when the unit is turned off.

SAVE SETTINGS

[YES], [CANCEL] Save to later recall the following sound settings

at

their current values: [CROSSOVER], [SPEAKER

LEVEL], [EQ SETTING], [POSITION], [TIME

ALGNMNT], [BASS BOOST], [SUBWOOFER].

LOAD SETTINGS

Load the sound settings, when you have already

per

formed [SAVE SETTINGS].

BASS BOOST

[0] to [+6] Select the bass boost level.

LOUDNESS

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

AUTO LV CTRL

[OFF], [MODE1], [MODE2] Adjust the difference in volume levels among

so

urces or audio files automatically.

SLA

[+4] to [–4] Adjust the volume level for each source except

FM

.

Each of the below combinations are set to the

s

ame setting automatically.

• W

hen making a USB connection, set USB, iPod,

ANDROID, SPOTIFY, and APP.

• W

hen making a Bluetooth connection, set BT

AUDIO, iPod, ANDROID, SPOTIFY, and APP.

SYSTEM settings

Menu Item Description

LANGUAGE

[ENG](English), [РУС](Russian),

[TUR](Turkish)

Select the language to display the text

information from a compressed audio file.

CLOCK SET

Set the clock (page 4).

Menu Item Description

12H/24H

[12H], [24H] Select the time notation.

BEEP TONE

[ON], [OFF] A beep can be heard when any button is pushed.

S

elect [OFF] to disable this function.

INFO DISPLAY

[SOURCE/BTINFO], [SOURCE/

S

PEANA], [CLOCK/BTINFO],

[CLOCK/SPEANA], [LEVEL METER],

[SPEANA], [OFF]

Display the item on the sub information display.

• Wh

en [SOURCE/SPEANA] or [CLOCK/SPEANA] is

selected, display the antenna instead of the

speana on the radio source.

DOT DISPLAY

[SPEANA], [ICON] Select [SPEANA] or [ICON] to appear on the left

s

ide of the display.

AUTO PI

[ON], [OFF] Search for a different station with the same

pro

gramming, even if using a preset station.

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

co

nnected to the unit.

BT AUDIO

[ON], [OFF] Set the Bluetooth signal on/off.

SPOTIFY

[ON], [OFF] Set to [ON] when using the Spotify function.

PW SAVE*

[ON], [OFF] Reduce the battery power consumption.

Turning on the source is the only operation

all

owed when this function is on.

BT MEM CLEAR

[YES], [CANCEL] Clear the Bluetooth device data (device list, PIN

cod

e, call history, phone book, preset phone

numbers) stored in the unit.

[CLEARED] appears when data is successfully

deleted.

Menu Item Description

17En

English

* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once

the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may

continue to draw power from the battery if your vehicle’s ignition does not have an ACC (accessory)

position.

PHONE CONNECT

[IPHONE/IPOD], [ANDROID] Select the type of device ([IPHONE/IPOD] or

[

ANDROID]) and the appropriate connection

method ([WIRED] or [BLUETOOTH]) according to

your device.

• Wh

en [BLUETOOTH] is selected, USB

connections cannot be made regardless of the

current Bluetooth connection to the unit.

• S

elect [ANDROID] when you connect the

mobile device other than iPhone or Android.

• W

hen the setting is changed, [USB AUTO]

(page 17) is automatically performed if [USB

AUTO] is set to [ON].

ANDROID WIRED

[MEMORY], [APP CONTROL] Select the appropriate connection method for an

A

ndroid device.

• T

his setting is not available when [BLUETOOTH]

is selected in [PHONE CONNECT].

P.A P P AUTO O N

[ON], [OFF]

Select [ON] to automatically launch Pioneer ARC

APP when an Android device is connected to the

unit via AOA. (Not available when [MEMORY] is

selected in [ANDROID WIRED].)

USB AUTO

[ON], [OFF] Select [ON] to automatically switch to [USB]

so

urce when a USB device/iPod is connected to

the unit.

Select [OFF] when a USB device/iPod is being

connected to the unit just for charging.

Menu Item Description

ILLUMINATION settings

Menu Item Description

COLOUR

[KEY COLOUR], [DISP COLOUR],

[BOTH COLOUR]

Select color for the keys/display of the unit from

12 preset colors, [SCAN] or [CUSTOM]*.

• [

SCAN]: Cycle through a variety of colors

automatically.

• [C

USTOM]*:

1 P

ress and hold the M.C. dial until the color

setting display appears.

2 S

et the primary color (R (red)/G (green)/B

(blue)) and brightness level ([0] to [60]).

You cannot select a level below 10 for all three

of

R (red), G (green), B (blue) at the same time.

You can also customize the preset colors. Select

o

ne of the preset colors, then press and hold the

M.C. dial until the color setting display appears.

* The CUSTOM setting is only available for [KEY

COLOUR] and [DISP COLOUR].

DIM SETTING

[SYNC ILLUMI], [SYNC CLOCK],

[O

N], [OFF]

Change the display brightness.

BRIGHTNESS

[1] to [10] Change the display brightness.

The available setting ranges differ depending on

[D

IM SETTING].

PHONE COLOUR

[FLASHING] Select the key color when a call is received.

Applies the color set by [KEY COLOUR].

[FLASH FX1] to [FLASH FX6] Cycle through a variety of colors automatically.

[OFF] No change in key color made.

ILLUMI FX

[ON], [OFF] The illumination effect can be seen when:

–there is an incoming call

–you are on a phone call

–a CD is inserted/ejected

The illumination effect will activate when the

A

CC power is turned on/off regardless of this

setting.

18En

MIXTRAX settings

Menu Item Description

SHORT PLAYBCK

[1.0 MIN], [1.5 MIN], [2.0 MIN],

[2.5 MIN], [3.0 MIN], [OFF]

Select the length of the playback time.

FLASH AREA

[KEY/DISPLAY], [KEY], [OFF] Select the area for the illumination effect.

When [OFF] is selected, the color set under the

IL

LUMINATION settings (page 17) is used as the

display color.

FLASH PATTERN

[SOUND LEVEL 1] to [SOUND LEVEL

6]

Change the illumination effect according to

t

he sound and bass level.

The flash pattern changes according to the

so

und level.

[LOW PASS 1] to [LOW PASS 6] The flash pattern changes according to the

bas

s level.

[RANDOM1] The flash pattern changes randomly according

t

o the sound level mode and low pass mode.

[RANDOM2] The flash pattern changes randomly according

t

o the sound level mode.

[RANDOM3] The flash pattern changes randomly according

t

o the low pass mode.

DISPLAY FX

[ON], [OFF] Set the MIXTRAX special effects on/off.

CUT IN FX

[ON], [OFF] Turn the MIXTRAX sound effects on/off while

m

anually changing the tracks.

In the following, "NW" represents network

mode and "STD" represents standard

mode. According to the connections you

have established, change the speaker

mode to standard mode (STD) or network

mode (NW) (page 5).

Important

• When installing this unit in a vehicle

without an ACC (accessory) position on

the ignition switch, failure to connect the

red cable to the terminal that detects

operation of the ignition key may result

in battery drain.

• Use of this unit in conditions other than

the following could result in fire or

malfunction.

–Vehicles with a 12-volt battery and

neg

ative grounding.

–When speaker output is used by 4

chan

nels, use speakers over 50 W

(maximum input power) and between 4

Ω to 8 Ω (impedance value). Do not use

1 Ω to 3 Ω speakers for this unit.

–When rear speaker output is used by 2

Ω

of subwoofer, use speakers over 70 W

(maximum input power).

* Please refer to connections for a

co

nnection method.

• T

o prevent a short-circuit, overheating or

malfunction, be sure to follow the

directions below.

–Disconnect the negative terminal of the

bat

tery before installation.

–Secure the wiring with cable clamps or

ad

hesive tape. Wrap adhesive tape

around wiring that comes into contact

with metal parts to protect the wiring.

– Place all cables away from moving parts,

such

as the shift lever and seat rails.

–Place all cables away

from hot places,

such as near the heater outlet.

–Do not connect the yellow cable to the

bat

tery by passing it through the hole

to the engine compartment.

–Cover any disconnected cable

co

nnectors with insulating tape.

–Do not shorten any cables.

–Never cut the insulation of the power

cabl

e of this unit in order to share the

power with other devices. The current

capacity of the cable is limited.

–Use a fuse of the rating prescribed.

–Never wire the negative speaker cable

di

rectly to ground.

–Never band together negative cables of

m

ultiple speakers.

• When t

his unit is on, control signals are

sent through the blue/white cable.

Connect this cable to the system remote

control of an external power amp or the

vehicle’s auto-antenna relay control

terminal (max. 300 mA 12 V DC). If the

vehicle is equipped with a glass antenna,

connect it to the antenna booster power

supply terminal.

• Nev

er connect the blue/white cable to

the power terminal of an external power

amp. Also, never connect it to the power

terminal of the auto antenna. Doing so

may result in battery drain or a

malfunction.

• T

he black cable is ground. Ground cables

for this unit and other equipment

(especially, high-current products such as

power amps) must be wired separately. If

Connections/Installation

Connections

ACC position No ACC position

19En

English

they are not, an accidental detachment

may result in a fire or malfunction.

• The graphical symbol placed on

the product means direct current.

This unit

Microphone (3 m)

Power cord input

Microphone input

Rear output (STD) or middle range

output (NW)

Front output (STD) or high range output

(NW)

Antenna input

Fuse (10 A)

Wired remote input

Hard-wired remote control adapter can

be connec

ted (sold separately).

Subwoofer output

Power cord

To power cord input

Depending on the kind of vehicle, the

function of and may be different.

In this case, be sure to connect to

and to .

Yel low

Back-up (or accessory)

Yel low

Connect to the constant 12 V supply

te

rminal.

Red

Accessory (or back-up)

Red

Connect to terminal controlled by the

ign

ition switch (12 V DC).

Connect leads of the same color to each

other.

Black (chassis ground)

Blue/white

The pin position of the ISO connector

w

ill differ depending on the type of

vehicle. Connect and when Pin 5

is an antenna control type. In another

t

ype of vehicle, never connect and

.

Blue/white

Connect to the system control terminal

of the power amp (max. 300 mA 12 V

DC).

Blue/white

Connect to the auto-antenna relay

c

ontrol terminal (max. 300 mA 12 V DC).

Speaker leads

White: Front left (STD) or high range

left (NW)

White/black: Front left (STD) or high

range left (NW)

Gray: Front right (STD) or high range

right (NW)

Gray/black: Front right (STD) or high

range right (NW)

Green: Rear left (STD) or middle

range left (NW)

Green/black: Rear left (STD) or

middle range left (NW)

Violet: Rear right (STD) or middle

range right (NW)

Violet/black: Rear right (STD) or

middle range right (NW)

Orange/white

Connect to a car’s illumination signal.

ISO connector

In some vehicles, the ISO connector

ma

y be divided into two. In this case, be

sure to connect to both connectors.

NOTES

• Change the initial menu of this unit. Refer

to [REAR-SP]

(page 5). The subwoofer

output of this unit is monaural.

• W

hen using a subwoofer of 2 Ω, be sure

to connect the subwoofer to the violet

and violet/black leads of this unit. Do not

connect anything to the green and

green/black leads.

Power amp (sold separately)

Perform these connections when using the

optional amplifier.

System remote control

Connect to blue/white cable.

Power amp (sold separately)

Connect with RCA cables (sold

separately)

To rear output (STD) or middle range

output (NW)

Rear speaker (STD) or middle range

speaker (NW)

To front output (STD) or high range

output (NW)

Front speaker (STD) or high range

speaker (NW)

To subwoofer output

Subwoofer

Important

• Check all connections and systems before

final installation.

• Do not use unauthorized parts as this

may cause malfunctions.

• C

onsult your dealer if installation requires

drilling of holes or other modifications to

the vehicle.

• Do

not install this unit where:

– it may interfere with operation of the

vehicl

e.

– it may cause injury to a passenger as a

r

esult of a sudden stop.

Installation

20En

• The semiconductor laser will be damaged

if it overheats. Install this unit away from

hot places such as near the heater outlet.

• Opti

mum performance is

obtained when the unit is

installed at an angle of less

than 60°.

• W

hen installing, to ensure proper heat

dispersal when using this unit, make sure

you leave ample space behind the rear

panel and wrap any loose cables so they

are not blocking the vents.

DIN mount installation

1 Insert the supplied mounting sleeve

into the dashboard.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs

(90°) into place.

Dashboard

Mounting sleeve

• M

ake sure that the unit is installed

securely in place. An unstable

installation may cause skipping or

other malfunctions.

3 Attach the trim ring.

Trim ring

When not using the supplied

mounting sleeve

1 Determine the appropriate position

where the holes on the bracket and

the side of the unit match.

2 Tighten the screws on each side.

Tapping screw (5 mm × 9 mm, not

supplied with product)

Mounting bracket

Dashboard or console

Removing the unit (installed with

the supplied mounting sleeve)

1 Remove the trim ring.

Leave ample

space

5 cm

Trim ring

• R

eleasing the front panel allows easier

access to the trim ring.

2 Insert the supplied extraction keys

into both sides of the unit until they

click into place.

3 Pull the unit out of the dashboard.

The microphone should be placed directly

in front of the driver at a suitable distance

to pick up their voice clearly.

CAUTION

It is extremely dangerous to allow the

microphone lead to become wound

around the steering column or shift lever.

Be sure to install the microphone in such a

way that it will not obstruct driving. It is

recommended to use the clamps (sold

separately) to arrange the lead.

NOTE

Depending on the vehicle model, the

microphone cable length may be too short

when you mount the microphone on the

sun visor. In such cases, install the

microphone on the steering column.

To install on the sun visor

1 Fit the microphone lead into the

groove.

2 Install the microphone clip on the sun

visor.

Lowering the sun visor reduces the

v

oice recognition rate.

To install on the steering

column

1 Slide the microphone base to detach it

from the microphone clip.

Microphone

Microphone clip

Microphone base

2 Install the microphone on the rear side

of the steering column.

Installing the microphone

Microphone

lead

Groove

Microphone clip

Страница загружается ...

Pioneer FH-X730BT Руководство пользователя

Pioneer FH-X730BT Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов