Sony KV-14LM1K Инструкция по применению

Категория
Телевизоры CRT
Тип
Инструкция по применению
R
FD Trinitron
Colour Television
KV-14LM1K
© 2000 by Sony Corporation
Instruction Manual
GB
Инструкции за експлоатация
Инструкция пo эксплyатации
BG
RU
4-205-569-42 (1)
2
Safety Information
Do not open the cabinet and the rear
cover of the TV. Refer to qualified
service personnel only.
To prevent fire or shock
hazard, do not expose the TV
to rain or moisture.
For your own safety, do not touch
any part of the TV, power lead or
aerial lead during lightning
storms.
Do not cover the
ventilation openings of the TV For
ventilation, leave a space of at
least 10cm all around the set.
Never place
the TV in hot, humid or
excessively dusty places. Do not
install the TV where it may be
exposed to mechanical vibrations.
To prevent fire, keep inflammable
objects or naked lights (eg
candles) away from the TV.
Clean the TV with a soft, lightly
dampened cloth. Do not use
benzine, thinner or any other
chemicals to clean the TV. Do not
scratch the TV screen. As a safety
precaution, unplug the TV before
cleaning it.
Pull out the power lead by the
plug. Do not pull on the power
lead itself.
Take care not to place heavy
objects on the power lead as this
could result in damage.
We recommend you wind any
excess lead around the holders
provided on the rear of the TV.
Place the TV on a secure stable
stand. Do not allow children to
climb on to it. Do not place the TV
on its side or face up.
Do not cover the ventilation
openings of the TV with items
such as curtains or newspapers
etc.
Safety Information
Never push objects of any kind into
the set as this could result in a fire
or electric shock. Never spill liquid
of any kind on the set. If any liquid
or solid object does fall through, do
not operate the TV. Have it checked
immediately by qualified
personnel.
For environmental and safety
reasons, it is recommended that
the TV set is not left in standby
mode when not in use. Disconnect
from the mains.
This set is to operate on a 220-
240V AC supply only. Take care
not to connect too many
appliances to the same power
socket as this could result in fire
or electric shock.
Unplug the power lead before
moving the TV. Avoid uneven
surfaces, quick steps or excessive
force. If the set has been dropped
or damaged, have it checked
immediately by qualified service
personnel.
3
GB
Introduction
Thank you for choosing this Sony FD Trinitron Colour Television.
Before operating the TV, please read this manual thoroughly and retain it for future
reference.
Symbols used in the manual:
Informs you of possible hazards.
Important information
Information on a feature.
1,2... Sequence of instructions.
Shaded buttons on the remote control show you the buttons you have to press to follow
the sequence of the instructions.
Informs you of the result of instructions.
Table of Contents
Safety Information................................................................................................................................... 2
Introduction..............................................................................................................................................3
Overview
Overview of Remote Control Buttons .................................................................................................. 4
Overview of TV Buttons ........................................................................................................................ 5
Installation
Inserting Batteries into the Remote Control ........................................................................................5
Connecting an Indoor Aerial .................................................................................................................6
Connecting an Outdoor Aerial and VCR ............................................................................................ 6
First Time Operation
Switching On the TV and Automatically Tuning .............................................................................. 7
Menu system
Introducing and Using the Menu System............................................................................................ 9
Menu Guide ............................................................................................................................................. 9
Additional Information
Connecting Optional Equipment ........................................................................................................ 15
Using Optional Equipment .................................................................................................................. 15
Specifications.......................................................................................................................................... 16
Troubleshooting..................................................................................................................................... 17
MENU
K
Table of Contents
03GBKV14LM1K.fm Page 3 Friday, June 22, 2001 11:46 AM
4
S
RM
887
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
K
Overview of Remote Control Buttons
Overview
Muting the Sound
Press to mute TV sound. press again
to restore the sound.
Displaying on Screen
information
Press to display all on-screen
indications. Press again to cancel.
Selecting channels
Press to select channels.
For double-digit programme
numbers, e.g. 23, press -/-- first, then
the buttons 2 and 3.
If you enter an incorrect first digit,
this should be corrected by entering
another digit (0-9) and then selecting
-/-- button again to enter the
programme number of your choice.
Selecting TV mode
Press to switch off video input.
This button does not work on this set.
This button does not work on this set.
Selecting Picture mode
Press repeatedly to change the
picture mode.
Adjusting TV volume
Press to adjust the volume of the TV.
This button does not work on this set.
Selecting channels
Press to select the next or previous
channel.
To Temporarily Switch Off TV
Press to temporarily switch off TV (the standby
indicator on TV lights up). Press again to switch on
TV from standby mode.
To save energy we recommend
switching off completely when TV is not
in use.
After 15 minutes without a
signal and without any button
being pressed, the TV switches
automatically into standby
mode.
Selecting input source
Press repeatedly until the desired
input symbol of the source appears
on the TV screen.
Back to the channel last
watched
Press to watch the last channel
selected (watched for at least 5
seconds).
Displaying the menu system
Press to display the menu on the TV
screen. Press again to remove the
menu display from the TV screen.
Menu selection
Scroll Up
Scroll Down
Previous menu or selection
Next menu or selection
OK confirms your selection
Selecting Screen format
Press to view programmes in 16:9
mode. Press again to return to 4:3
mode.
03GBKV14LM1K.fm Page 4 Friday, June 22, 2001 11:46 AM
5
GB
Overview of TV Buttons
Inserting Batteries into the Remote Control
Make sure to insert the supplied batteries using the correct polarities.
Always remember you dispose of used batteries in an environmental friendly way.
Overview-Installation
On/Off
switch
Auto Start
Up Button
Volume
control
buttons
Video
Input
jack
Audio
Input
jack
Standby
indicator
Programme Up or
Down Buttons (Select
TV channels)
Selecting
Input source
Headphone
jack
03GBKV14LM1K.fm Page 5 Friday, June 22, 2001 11:46 AM
6
GB
Connecting an Indoor Aerial
Connecting an Outdoor Aerial and VCR
Installation
Connecting cables are not supplied
For more details of VCR connection, please refer to
the section “Connecting Optional
Equipment” of this instruction manual.
or
VCR
Scart lead is optional.
OUT IN
For a better reception we recommend you connect an external
aerial. However, where an external aerial is not available and
your local VHF/UHF signal is strong you can connect the
supplied indoor aerial as follows:
1 Insert the aerial into the opening on top of the set until it
clicks.
2 Connect the aerial connector to the aerial socket on the rear
of the set.
3 After turning on the TV, adjust the aerial for optimum
reception.
6
03GBKV14LM1K.fm Page 6 Friday, June 22, 2001 11:46 AM
7
GB
Language
Select Language:
English
Español
Français
Italiano
Magyar
Nederlands
OK
Do you want to start
automatic tuning?
Yes
No
OK
K
K
Switching On the TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screen appear on the TV enabling
you to: 1) choose the language of the menu screen, 2) search and store all available channels
(TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the
screen.
However, if you need to change the language menu, change or repeat the tuning (e.g. when
you move house) or rearrange again the order of the channels afterwards, you can do that
by selecting the appropriate menu in the (Set Up). For more information, refer to the
“Menu Guide” section of this instruction manual. You can also do that by pressing the
Auto Start Up Button on the TV set.
First Time Operation
continued...
1 Connect the TV plug to the mains socket (220-240V AC,
50Hz)
Press the on/off button on the TV set to turn on the TV.
The first time you press this button, a Language menu
displays automatically on the TV screen.
2 Press the or button on the remote control to select
the language, then press the OK button to confirm your
selection. From now on all the menus will appear in the
selected language.
3 The Auto Tuning menu appears on the screen. Press the
OK button to select Yes.
03GBKV14LM1K.fm Page 7 Friday, June 22, 2001 11:46 AM
8
First Time Operation
MENU
Your TV is now ready for use
4 A new menu appears on the screen asking you to check
that the aerial is connected. Ensure the aerial is connected
and then press the OK button to start the automatic
tuning.
The TV starts to automatically search and store all
available channels (TV Broadcast) for you.
This procedure could take some minutes. Please be
patient and do not press any button. Otherwise the
automatic tuning will not be completed.
5 After all available channels are captioned and stored,
the Programme Sorting menu appears automatically
on the screen enabling you to change the order in
which the channels appear on the screen.
a) If you do not wish to change the channel order, go to
step 6.
b) If you wish to change the channel order:
1 Press the or button to select the programme
number with the channel (TV Broadcast) you wish
to rearrange, then press the button.
2 Press the or button to select the new
programme number position for your selected
channel (TV Broadcast), then press .
3 Repeat steps b)1 and b)2 if you wish to change
the order of the other channels.
6 Press the MENU button to remove the menu from the
screen.
Please confirm that
aerial is connected
Confirm
OK
Programme: 01
System: B/G
Channel: C21
Auto Tuning
Searching...
Programme Sorting
Select channel:
Exit:
MENU
Programme:
01 C41
02 C31
03 C44
04 C33
05 C27
06 C34
OK
Programme Sorting
Select new position:
Exit: MENU
Programme:
01 C41
02 C31
03 C44
04 C33
05 C27
06 C34 05 C27
OK
K
K
K
03GBKV14LM1K.fm Page 8 Friday, June 22, 2001 11:46 AM
9
GB
Introducing and Using the Menu System
Your TV uses an on-screen menu system to guide you through the operations. Use the
following buttons on the Remote Control to operate the menu system:
1 Press the MENU button to switch the first level menu on.
MENU
Menu System
2 • To highlight the desired menu or option, press or .
• To enter to the selected menu or option, press .
• To return to the last menu or option, press .
• To alter settings of your selected option, press //or.
• To confirm and store your selection, press OK.
3 Press the MENU button to remove the menu from the screen.
continued...
MENU
K
Menu Guide
PICTURE ADJUSTMENT
The “Picture Adjustment” menu allows you to
alter the picture adjustments.
To do that: after selecting the item you want to
alter press , then press repeatedly / /
or to adjust it and finally press OK to
store the new adjustment.
This menu also allows you to customise the
picture mode based on the programme you are
watching:
Personal (for individual settings).
Live (for live broadcast programmes).
Movie (for films).
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Brightness, Colour and Sharpness can only be alterated if “Personal” mode is selected.
Hue is only available for NTSC colour signal (e.g: USA video tapes).
Select Reset and press OK to reset the picture to the factory preset levels.
03GBKV14LM1K.fm Page 9 Friday, June 22, 2001 11:46 AM
10
Menu System
SLEEP TIMER
The “Sleep Timer” option in the “Timer” menu
allows you to select a time period for the TV to
switch itself automatically into the standby
mode.
To do that: after selecting the option press ,
then press or to set the time period delay
(max. of 4 hours) and finally press OK to store.
While watching the TV, you can press the
button on the remote control to display the
time remaining.
One minute before the TV switches itself into
standby mode, the time remaining is displayed on
the TV screen automatically.
ON TIMER
The “On Timer” option in the “Timer” menu
allows you to select a time period for the TV to
switch itself automatically on from standby
mode.
To do that: after selecting the option press ,
then press or to set the time period delay
(max. 12 hours) and press OK to store. Finally
press the standby button
on the remote
control. After the selected length of time the TV
switches on automatically.
The standby indicator on the TV set flashes
regularly to indicate that “On Timer” is active.
Any loss of power will cause these settings to be
cleared.
LANGUAGE
The “Language” option in the “Set Up” menu
allows you to select the language that the
menus are displayed in.
To do that: after selecting the option, press
and then proceed in the same way as in the step
2 of the section “Switching On the TV and
Automatically Tuning”.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Timer
Sleep Timer: Off
On Timer: Off
OK
Timer
Sleep Timer: Off
On Timer: Off
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Timer
Sleep Timer: Off
On Timer: i Off
OK
Timer
Sleep Timer: Off
On Timer: Off
OK
continued...
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
03GBKV14LM1K.fm Page 10 Friday, June 22, 2001 11:46 AM
11
GB
Menu System
continued...
AUTO TUNING
The “Auto Tuning” option in the “Set Up”
menu allows you to automatically search for
and store all available TV channels.
To do that: after selecting the option, press
and then proceed in the same way as in TV
steps 3 and 4 of the section “Switching On the
TV and Automatically Tuning”.
PROGRAMME SORTING
The “Programme Sorting” option in the “Set
Up” menu allows you to change the order in
which the channels (TV Broadcast) appear on
the screen.
To do that: after selecting the option, press
and then proceed in the same way as in step 5 b)
of the section “Switching On the TV and
Automatically Tuning”.
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
a) Preset channels or a video input source one
by one to the programme order of your
choice. To do that:
1 After selecting the ”Manual Programme
Preset” option, press then with
Programme option highlighted press .
Press or to select on which
programme number you want to preset the
channel (for VCR, select programme number
“0”). Then press .
2 After selecting the System option, press .
Then press or to select the TV
Broadcast system (B/G for western European
countries or D/K for eastern European
countries). Then press .
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Manual Programme Preset
Programme:
System:
Channel:
AFT:
Skip:
Confirm
OK
01
B/G
C 21
On
No
03GBKV14LM1K.fm Page 11 Friday, June 22, 2001 11:46 AM
12
Menu System
continued...
3 After selecting the Channel option, press .
Then press or to select the channel
tuning (“C” for terrestrial channels or “S” for
cable channels). Next press . After that,
press the number buttons to enter directly the
channel number of the TV Broadcast or the
channel of the VCR signal. If you do not
know the channel number, press or to
search for it. When you tune the desired
channel, press OK twice to store.
Repeat all the above steps to tune and store more
channels.
b)Normally the automatic fine tuning (AFT) is
operating, however you can manually fine
tune the TV to obtain a better picture
reception in the case that the picture is
distorted.
To do that: while watching the channel (TV
Broadcast) you wish to fine tune, select the
AFT option and press . Next press
or to adjust the fine tuning between -15
and +15. Finally press OK twice to store.
c) Skip any unwanted programme numbers
when they are selected with the PROGR +/-
buttons.
To do that: Highlighting the Programme
option, press the PROGR +/- button to select
the programme number you want to skip.
When the programme you want to skip
appears on the screen, select the Skip option
and press . Next press or to select
Yes. Finally press OK twice to confirm and
store.
To cancel this function afterwards, select “No”
instead of “Yes” in the step above.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Manual Programme Preset
Programme:
System:
Channel:
AFT:
Skip:
Confirm
OK
01
B/G
C 21
On
No
03GBKV14LM1K.fm Page 12 Friday, June 22, 2001 11:46 AM
13
GB
Menu System
PARENTAL LOCK
The “Parental Lock” option in the “Advanced
Features” menu allows you to lock the buttons
of the TV set. In this way after this option is
selected and the TV set is switched off, the
buttons on the TV do not work and the TV only
works by using the remote control buttons.
To do that: after selecting the option, press .
Then press or to select On. Press OK to
confirm and store and finally press on the
remote control.
To cancel this function afterwards, select “Off”
instead of “On” in the step above.
NOISE REDUCTION
The “Noise Reduction” option in the
“Advanced Features” menu allows you to
reduce the picture noise in case of a weak
broadcasting signal.
To do that: after selecting the option, press .
Then press or to select On. Finally press
OK to confirm and store.
To cancel this function afterwards, select “Off”
instead of “On” in the step above.
AUTO VOLUME CONTROL
The “Auto Volume Ctrl.” option in the
“Advanced Features” menu allows you to keep
the same volume level of the channels,
independent of the broadcast signal (e.g. in case
of advertisement).
To do that: after selecting the option, press .
Then press o
r to select On. Finally press
OK to confirm and store.
To cancel this function afterwards, select “Off”
instead of “On” in the step above.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Advanced Features
Parental Lock:
Noise Reduction:
Auto Volume Ctrl.:
RGB Centring:
Off
On
On
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Advanced Features
Parental Lock:
Noise Reduction:
Auto Volume Ctrl.:
RGB Centring:
Off
On
On
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Advanced Features
Parental Lock:
Noise Reduction:
Auto Volume Ctrl.:
RGB Centring:
Off
On
On
0
OK
continued...
03GBKV14LM1K.fm Page 13 Friday, June 22, 2001 11:46 AM
14
Menu System
RGB CENTRING
When connecting an RGB source, such as a
“PlayStation”, you may need to readjust the
geometry of the picture. In that case, you can
readjust it through the “RGB Centring” option
in the “Advanced Features”.
To do that: while watching an RGB source select
the “RGB Centring” option and press . Then
press or to adjust the centre of the
picture between –10 and +10. Finally press OK
to confirm and store.
Level 1 Level 2 Level 3 / Function
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language
Auto Tuning
Programme Sorting
Manual Programme Preset
Advanced Features
OK
Advanced Features
Parental Lock:
Noise Reduction:
Auto Volume Ctrl.:
RGB Centring:
Off
On
On
0
OK
03GBKV14LM1K.fm Page 14 Friday, June 22, 2001 11:46 AM
15
GB
Connecting Optional Equipment
Using the following instructions, you can connect a wide range of optional equipment to
your TV set. (Connecting cables are not supplied).
Connecting a VCR:
To connect a VCR, please refer to
the section “Connecting the
aerial and VCR” of this instruction
manual. We recommend you
connect your VCR using a scart
lead. If you do not have a scart
lead, tune in the VCR test signal
to TV programme number “0”.
by using “Manual Programme
Preset” option. (for details how
to manual programme, see page
11, step a).
Also refer to your VCR
instruction manual to find out
how to find the output channel
of your VCR.
* “PlayStation” is a product of Sony Computer Entertainment, Inc.
* “PlayStation” is a trademark of Sony Computer Entertainment, Inc.
Using Optional Equipment
1 Connect your equipment to the designated TV socket, as indicated above.
2 To watch the picture of the connected equipment, press the button repeatedly until the
correct input symbol appears on the screen.
Symbol Input Signals
1•Audio / video input signal through the Scart connector C
RGB input signal through the Scart connector C. This symbol appears only
if a RGB source has been connected.
2•Video input signal through the phono socket A and Audio input signal
through B.
3 Switch on the connected equipment.
4 Press button on the remote control to return to the normal TV picture.
Additional Information
AB
1
2
C
8mm/Hi8/DVC
camcorder
Decoder
“PlayStation”*
VCR
03GBKV14LM1K.fm Page 15 Friday, June 22, 2001 11:46 AM
16
Specifications
Additional Information
TV system:
B/G/H, D/K
Colour system:
PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12, R21-R69
Picture Tube:
Flat Display FD Trinitron
Rear Terminals
:1/ 21-pin scart connector
(CENELEC standard)
including audio/video
input, RGB input, TV audio/
video output.
Front Terminals
2 video input – phono jack
2 audio input – phono jack
headphones jack
Sound Output:
1 x 6 W (music power)
1 x 3 W (RMS Mono)
Design and specifications are subject to change without notice.
Ecological Paper- Totally Chlorine Free
Power Consumption:
42 W
Standby Power Consumption:
0.55 W
Dimensions (w x h x d) :
Approx. 393 x 358 x 415 mm.
Weight:
Approx. 11.5 Kg.
Accessories supplied:
1 Remote Control (RM-889).
2 Batteries (IEC designated).
1 Aerial.
Other features:
Sleep Timer.
Wake UP Timer.
TV system Autodetection.
03GBKV14LM1K.fm Page 16 Friday, June 22, 2001 11:46 AM
17
GB
Troubleshooting
Here are some simple solutions to the problems which may affect the picture and sound.
Additional Information
Problem
No picture (screen is dark) and no
sound.
Poor or no picture (screen is dark),
but good sound.
No picture or no menu information
from the equipment connected to the
Scart connector.
Good picture, no sound.
No colour on colour programmes.
Distorted picture when changing
programmes.
Noisy picture when viewing a TV
channel.
Remote control does not function.
The standby indicator on the TV
flashes even though the “On Timer”
function is not in use.
Solution
Check the aerial connection.
• Plug the TV in and press the button on the front of
TV.
If the standby indicator is on, press button on
the remote control.
Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to the
factory settings.
Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
• Press the +/- button on the remote control.
• Using the menu system, select the “Picture
Adjustment” menu and select “Reset” to return to
factory settings.
• Turn off any equipment connected to the Scart
connector on the rear of the TV.
• Using the menu system, select the “Manual
Programme Preset” menu and adjust Fine Tuning
(AFT) to obtain better picture reception.
• Using the menu system, select the “Noise Reduction”
option in the “Advanced Features” menu and select
“On” to reduce the noise in the picture.
• Replace the batteries.
• Contact to your nearest Sony service centre.
In case of problems, have your TV serviced by qualified personnel. Never open the
casing yourself.
03GBKV14LM1K.fm Page 17 Friday, June 22, 2001 11:46 AM
18
Техника на безопасност
He oтвaряйте кутиятa и задния
кaпaк нa тeиeвизорa.
Oбръщайте се само към
квaлифициран сервизен
перcoнaл.
Зa дa прeдoтврaтитe риcкa
oт тoкoв yдaр, нe излaгaйтe
тeлeвизорa нa дъжд или
влaгa.
Зa Baшa coбcтвeнa бeзoпacнocт
нe пипaйтe тeлeвизорa, кaбeлa
или aнтeнaтa му по врeмe нa
гръмотeвични бури.
He пoкривaйтe
вeнтилaциoннитe отвoри нa
тeлeвизoрa.
Ocтaвeтe нaй-мaлко 10 см.
рaзтoяниe oкoлo тeлeвизoрa зa
вeнтилация.
Зa дa избегнeтe пoжaр, дръжтe
нacтрaнa oт тeлeвизорa
възпламeними и oткрити
източници нa светлина/
напримeр cвeщи/.
Koгaтo изключвaтe тeлeвизopa,
дъpпaйтe щeпceлa, a нe кaбелa.
He пocтaвяйтe тeжки пpeдмети
въpxy кaбeлa, тъй кaтo тoвa
мoжe дa гo пoвpeди.
Пpeпopъчвaмe ви дa нaвиeтe
излишния зaxpaнвaщ кaбeл
oкoлo пpeднaзнaчeнитe зa цeлтa
пpиcпocoблeния нa зaднaтa
cтpaнa нa тeлeвизopa.
Пocтaвяйтe тeлeвизopa нa
cигypнa, cтaбилнa пocтaвкa.
He пoзвoлявaйтe нa дeцa дa ce
кaтepят пo нeгo. He гo
oбpъщaйтe нa cтpaни или пo
“гpъ
Б”.
He пoкpивaйтe
вeнтилaцкoннитe oтвopи нa
тeлeвизopa
c пpeдмeти кaтo пepдeтa,
вecтници и дp.
Техника на безопасност
Пo причини за безoпастност от
въздействие на природни
явления e препоръчително да
не оставяте телевизора в
режим “stand by”, a да гo
изключватe централно.
Tози тeлeвизор може да работи
само на захранващо
напрежение 220-240 V.
Bнимавайте да не включвате
твърде много уреди в един
контакт, тьй като това може да
причини токов удар.
Hикогa не пъхaйте кaквито и да
било прeдмети в телeвизорa, тьй
като товa може дa причини пожар
или токов удар. Hикога не
разливaйте течности по
телевизора. B случай, чe течност
или твърд прeдмет попaднат в
телевизора го изключете.
Cвържете сe нeзaбaвно c
квалифицирани служители нa Coни.
Hикoгa нe пoстaвяйтe
тeлeвизoрa нa гoрeщи, влaжни
или изключитeлнo прaшни
мecтa. He инстaлирaйтe
тeлeвизорa нa мecтa кьдето
можe дa бъде изложeн нa
меxaнични вибрaции.
Пoчиствaйтe тeлeвизора c мeкa,
лeкo влажна кърпа. He използвaйтe
бeнзин, рaзрeдитeл или дрyги
xимикaли, зa дa почиститe
тeлевизoрa. He дpacкaйтe пo eкpaнa
нa тeлeвизopa. Зa пo-гoлямa
бeзoпacтнocт изключвaйтe
тeлевизopa oт кoнтaктa, кoгaтo го
пoчиcтвaтe.
Излючвaйтe кaбeлa нa
тeлeвизopa пpeди дa гo
мecтитe. Пpи пpeмecтвaнeтo
избягвaйтe нepaвни
пoвъpxнocти и нe пpaвeтe бъpзи
кpaчки. Aкo изпycнeтe или
нapaнитe тeлeвизopa,
нeзaбaвнo ce кoнcyлpaйтe c
квaлифициpaни cepвизни
cлyжитeли нa Coни.
19
BG
Увод
Благодарим Ви за избора на този цветен телевизор Sony с плосък екран FD
Trinitron.
Преди използване на телевизора прочетете внимателно това ръководство за
експлоатация и го запазете за бъдещи изяснения.
Символи използвани в това ръководство:
Потенциална опасност.
Важна информация.
Информация за функцията.
1,2... Последователност за следване на инструкциите.
Потъмнените бутони на дистанционното управление показват кои бутони
трябва да се натискат за изпълнението на различните операции.
Информация за резултата от инструкциите.
Съдържание
Техника на безопасност .................................................................................................................... 18
Увод ........................................................................................................................................................19
Основно описание
Основно описание на бутоните на дистанционното управление........................................... 20
Основно описание на бутоните на телевизора .......................................................................... 21
Инсталиране
Инсталиране на батериите в устройството за дистанционно управление ......................... 21
Cвъpзвaнe нa пopтaтивнa aнтeнa ........................................................................................ 22
Cвъpзвaнe нa външнa aнтeнa и видeo................................................................................. 22
Първоначално включване
Включване и автоматично настройване на телевизора .........................................................23
Ситема от менюта на екрана
Увод и боравене със системата от менюта ................................................................................. 25
Водач на менютата ............................................................................................................................ 25
Допълнителна информация
Свързване на допълнителни апарати ...........................................................................................31
Боравене с допълнителни апарати ............................................................................................... 31
Характеристики ................................................................................................................................... 32
Отстраняване на неизправности ................................................................................................... 33
MENU
K
Съдържание
20
Основно описание на бутоните на дистанционното управление
Основно описание
Елиминиране на звука
Натиснете го за премахване на
звука.
Натиснете го отново за
възвръщане на звука.
Изобразяване на информация на
екрана
Натиснете го за изобразяване на
всички индикации на екрана.
Натиснете го отново за
премахване.
Избор на канали
Натиснете ги за избор на канали.
За двуцифрени програмни номера,
напр. 23, първо натиснете -/-- и
след това бутоните 2 и 3.
Ако сбъркате при вкарването на
първата цифра, продължете
вкарвайки и втората (от 0 до 9) и
веднага след това повторете
операцията.
Избор на режим на телевизия
Натиснете го за да изключите
входа за видео.
Бyтoн бeз фyнкция c тoзи aпapaт.
Бyтoн бeз фyнкция c тoзи aпapaт.
Избор на режим на образа
Натиснете го няколко пъти за
смяна на режима на образа.
Настройване на силата на звука
Натиснете го за настройване на
силата на звука.
Бyтoн бeз фyнкция c тoзи aпapaт.
Избор на канали
Натиснете го за избор на преден
или следващ канал.
S
RM
887
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
K
Временно изключване на телевизора
Натиснете го за временно изключване на
телевизора (индикаторът за режим на очакване
ще светне). Натиснете го отново за да
включите телевизора от режима на временно
изключване (standby).
За икономия на ел. енергия се
препоръчва цялостното
изключване на телевизора когато
не се използва.
Ако в продължение на 15 мин.
няма ТВ сигнал и не се
натискат бутоните, телевизора
ще мине автоматично в режим
на временно изключване
(standby).
Избор на входен сигнал
Натиснете го няколко пъти,
докато символа на желания
входен сигнал се появи на екрана.
Връщане на последния избран
канал
Натиснете го за да върнете
последния избран канал
(предният канал трябва да е бил
изобразен в продължение на
най-малко 5 сек.).
Активиране на системата от
менюта
Натиснете го за да видите
менюто на екрана. Натиснете го
отново за премахване и връщане
на нормалния ТВ екран.
Бутони за избора на менюто
Качване с едно ниво.
Слизане с едно ниво.
Отиване в предно меню или
избор.
Отиване в следващо меню
или избор.
OK Утвърждаване на избора.
Избор на формат на екрана
Натиснете го няколко пъти за
смяна на формат на екрана: 4:3 за
обикновенен образ или 16:9 за
имитация на панорамен екран.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50

Sony KV-14LM1K Инструкция по применению

Категория
Телевизоры CRT
Тип
Инструкция по применению

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ