Yamaha TT-S303 Инструкция по применению

Owner’s Manual

Mode d’emploi

Bedienungsanleitung

Bruksanvisning

Manuale di istruzioni

Manual de instrucciones

Gebruiksaanwijzing

Инструкция по эксплуатации

EnglishSvenska

Nederlands

FrançaisItaliano DeutschEspañol

Русский

Owner’s Manual

2En

This product is designed for use at home to enjoy listening to audio.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE USE. BE

SURE TO FOLLOW THESE INSTRUCTIONS.

The precautions listed below are to prevent

risk of harm to the user and others, as well as

to prevent property damage, and to help the

user use this unit properly and safely. Be sure

to follow these instructions.

After reading this manual, be sure to keep it in a

safe place where it can be referenced at any time.

WARNING

This content indicates “risk of serious injury

or death.”

If you notice any abnormality

• If any of the following abnormalities occur,

immediately turn off the power and disconnect

the power plug.

- The power cord/plug is damaged.

- An unusual smell, unusual sound or smoke is

emitted from the unit.

- Foreign material or water gets into the interior

of the unit.

- There is a loss of sound during use.

- There is a crack or damage in the unit.

Continued use could cause electric shocks, a fire,

or malfunctions. Immediately request an

inspection or repair from the dealer where you

purchased the unit or from qualified Yamaha

service personnel.

Power supply

• Do not do anything that could damage the power

cord.

- Do not place it near a heater.

- Do not bend it excessively or alter it.

- Do not scratch it.

- Do not place it under a heavy object.

Using the power cord with the core of the cord

exposed could cause electric shocks or a fire.

• Do not touch the power plug or cord if there is a

chance of lightning. Failure to observe this may

cause electric shocks.

• Use this unit with the power supply voltage

printed on it. Failure to connect to an appropriate

AC outlet may cause a fire, electric shocks, or

malfunctions.

• Be sure to use the supplied AC adaptor. Failure to

observe the above may cause a fire, burns, or

malfunctions.

• Do not use the supplied AC adaptor for other

units. Failure to observe the above may cause a

fire, burns, or malfunctions.

• Check the electric plug periodically and remove

any dirt or dust which may have accumulated on

it. Failure to observe this may cause a fire or

electric shocks.

• Be sure to request inspections or repairs from

the dealer where you purchased the unit or

from qualified Yamaha service personnel.

• Yamaha cannot be held responsible for injury

to you or damage of the products caused by

improper use or modifications to the unit.

• This product is for ordinary homes. Do not use

for applications requiring high reliability, such

as managing lives, health care or high-value

assets.

3

English

En

• When setting up the unit, make sure that the AC

outlet you are using is easily accessible. If some

trouble or malfunction occurs, immediately turn

off the power switch and disconnect the plug

from the AC outlet. Even when the power switch

is turned off, as long as the power cord is not

unplugged from the wall AC outlet, the unit will

not be disconnected from the power source.

• If you hear thunder or suspect approaching

lightning, quickly turn off the power switch and

pull the power plug from the AC outlet. Failure to

observe this may cause a fire or malfunctions.

• If not using the unit for long periods of time, be

sure to pull the power plug from the AC outlet.

Failure to observe this may cause a fire or

malfunctions.

Do not disassemble

• Do not disassemble or modify this unit. Failure to

observe this may cause a fire, electric shocks,

injury, or malfunctions.

Water warning

• Do not expose the unit to rain, use it near water

or in damp or wet conditions, or place on it any

containers (such as vases, bottles or glasses)

containing liquids which might spill into any

openings or places where water may drop. A

liquid such as water getting into the unit may

cause a fire, electric shocks, or malfunctions.

• Never insert or remove an electric plug with wet

hands. Do not handle this unit with wet hands.

Failure to observe this may cause electric shocks

or malfunctions.

Fire warning

• Do not place any burning items or open flames

near the unit, since they may cause a fire.

Handling caution

• Be careful not to drop or apply strong impact to

this unit or the AC adaptor. Failure to observe this

may cause electric shocks, a fire, or malfunctions.

CAUTION

This content indicates “risk of injury.”

Power supply

• Do not cover or wrap the AC adaptor with a cloth

or blanket. Failure to observe this may trap heat,

causing deformation in the case or a fire.

• Do not use an AC outlet where the power plug fits

loosely when inserted. Failure to observe this may

cause a fire, electric shocks, or burns.

• When disconnecting the power plug, always hold

the plug itself and not the cord. Pulling by the

cord can damage it and cause electric shocks or

a fire.

• Insert the power plug firmly all the way into the

AC outlet. Using the unit when it is not plugged in

sufficiently can cause dust to accumulate on the

plug, causing a fire or burns.

Installation

• Do not place the unit in an unstable position

where it might accidentally drop or fall over and

cause injuries.

• Do not install the unit in places where it may

come into contact with corrosive gases or salt air

or places that have excessive smoke or steam.

Doing so may result in malfunction.

• Before moving this unit, be sure to turn off the

power switch and disconnect all connection

cables. Failure to observe this may damage the

cables or cause you or someone else to trip and

fall.

4En

Hearing loss

• Before connecting the unit to other devices, turn

off the power for all devices. Failing to do so may

result in hearing loss, electric shock, or device

damage.

• When turning on the AC power in your audio

system, always turn on the amplifier or receiver

LAST, to avoid hearing loss and speaker damage.

When turning the power off, the amplifier or

receiver should be turned off FIRST for the same

reason. Failure to observe the above may cause

hearing impairment or speaker damage.

Maintenance

• Remove the power plug from the AC outlet before

cleaning the unit. Failure to observe this may

cause electric shocks.

Handling caution

• Keep small parts out of the reach of infants. Your

children may accidentally swallow them.

• Do not do the following:

- Stand on or sit on the equipment.

- Put heavy items on top of the equipment.

- Place the equipment in a stack.

- Apply unreasonable force to buttons,

switches, input/output terminals, etc.

Failure to observe this may cause injuries or

damage to the equipment.

• Avoid pulling the connected cables to prevent

injuries or damage to the unit by causing it to fall.

Notice

Indicates points that you must observe in

order to prevent product failure, damage or

malfunction and data loss.

Power supply

• If you plan not to use this product for a long

period of time, be sure to unplug the product

from the AC outlet. A small amount of current

continues to flow after you turn off this product

using the [z] (power).

Installation

• Do not use this unit in the vicinity of other

electronic equipment, such as a TV, radio, or

mobile phone. Failure to observe this may cause

this unit or the TV or radio to produce noise.

• Do not use this unit in a location that is exposed

to direct sunlight that becomes extremely hot,

such as near a heater, or extremely cold, or that is

subject to excessive dust or vibration. Failure to

observe this may cause the unit's panel to

become deformed, the internal components to

malfunction, or for operation to become unstable.

Connections

• If connecting external units, be sure to thoroughly

read the manual for each unit and connect them

in accordance with the instructions.

Failure to properly handle a unit in accordance

with the instructions could cause malfunctions.

Handling

• Do not place plastic, or rubber products on this

unit. Failure to observe this may cause

discoloration or deformation in the panel of this

unit.

• If the ambient temperature changes drastically

(such as during unit transportation or under rapid

heating or cooling) and there is a chance

condensation may have formed in the unit, leave

the unit for several hours without turning on the

power until it is completely dry before use. Using

the unit while there is condensation can cause

malfunctions.

Maintenance

• If the temperature or humidity changes drastically,

water droplets (condensation) may form on the

unit surface. If water droplets form, immediately

wipe them off with a soft cloth. If water droplets

are left on the unit, they may be absorbed into the

wooden parts, causing deformation.

• When cleaning the unit, use a dry, soft cloth.

Using chemicals such as benzine or thinner,

cleaning agents, or chemical scrubbing cloths

can cause discoloration or deformation.

Disposal or transfer

• If you plan to transfer ownership of this product,

include this document and the supplied

accessories along with the product.

• Follow the rules of your local authority to dispose

of this product and its accessories.

5

English

En

Information

About content in this manual

• The illustrations and screens in this manual are for

instructional purposes only.

• The company names and product names in this

manual are the trademarks or registered

trademarks of their respective companies.

About the name plate of the unit

(1003-M06 plate bottom en 01)

The model number, serial number, power

requirements, etc., may be found on or near the

name plate, which is at the bottom of the unit. You

should note this serial number in the space provided

below and retain this manual as a permanent record

of your purchase to aid identification in the event of

theft.

Model No.

Serial No.

(58-M02 WEEE en 01)

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents

means that used electrical and electronic products should not be mixed with

general household waste.

For proper treatment, recovery and recycling of old products, please take them to

applicable collection points, in accordance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources

and prevent any potential negative effects on human health and the environment

which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please

contact your local municipality, your waste disposal service or the point of sale

where you purchased the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your

dealer or supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items,

please contact your local authorities or dealer and ask for the correct method of

disposal.

6En

Contents

Before you start 7

Features of this unit. . . . . . . . . . . . . . . . . . . . . . . . . . 7

About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Check the supplied accessories. . . . . . . . . . . . . . . . 8

Handling records . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Parts and their functions . . . . . . . . . . . . . . . . . . . . . . 9

Top panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Back panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Getting ready 11

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Assembling the unit . . . . . . . . . . . . . . . . . . . . . . . . 11

Attaching the dust cover . . . . . . . . . . . . . . . . . . . . 13

Making connections . . . . . . . . . . . . . . . . . . . . . . . . 14

Making adjustments . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the stylus pressure . . . . . . . . . . . . . . . . . 15

Adjusting the anti-skating . . . . . . . . . . . . . . . . . . . . 17

Turning the power on . . . . . . . . . . . . . . . . . . . . . . . 17

Playback 18

When necessary 21

Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Replacing the belt . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Replacing the record stylus. . . . . . . . . . . . . . . . . . . 22

Moving this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

7

English

En

Before you start

Features of this unit

This is a turntable for playing analog records.

Wooden cabinet with a gloss finish

Provides both beauty and practical advantages such as high rigidity and

vibrational damping

Highly rigid straight tone arm virtually eliminates any effect on the

delicate musical signal

Easy switching between LINE output equipped with a high-quality

PHONO EQ circuit and PHONO direct output, giving you flexibility when

setting up your record playback system

High rotational stability is achieved by using an aluminum die cast

platter belt-driven by a high-torque DC motor

Feedback margin is maintained by insulators (feet) that feature excellent

absorption of vibration and shock

About this manual

When reading this manual, please note the following.

Specifications and appearance are subject to change without notice in

order to improve the product.

Explanation of graphic symbols used in this manual:

-“ WARNING” indicates points that you must observe to avoid risk

of death or serious injury.

-“ CAUTION” indicates points that you must observe to avoid risk

of injury.

- indicates points that you must observe to avoid

damaging the product or causing it to malfunction.

- indicates supplementary information that you will find

useful.

NOTICE

NOTE

Before you start | Check the supplied accessories

8En

Check the supplied accessories

Make sure that all items are present.

Handling records

When you hold a record, you should either support the record’s label area and

its outer edge, or hold the record’s outer edges between your two hands.

Platter ×1 Platter sheet ×1 Belt ×1

* The belt is installed on the

platter.

Counter weight ×1 Head shell ×1

(with cartridge)

45 rpm adaptor ×1

Dust cover ×1 Dust cover hinge ×2 RCA stereo cable ×1

AC adaptor ×1

* For details, refer to the

included “Supplement”

(leaflet).

Owner’s Manual (this manual)

Supplement (leaflet)

Label area Outer edge

Before you start | Parts and their functions

9

English

En

Parts and their functions

Top panel

햲33/45 (speed) (page 18)

햳PLAY/STOP (play/stop) (page 18)

햴Platter (page 11)

햵Platter sheet (page 12)

햶Center spindle (page 11)

햷Tone arm (page 12)

햸Head shell (page 12)

햹Cartridge

햺Counter weight (page 12)

햻Counter ring (page 16)

햽Arm rest (page 15)

햾Lift lever (page 19)

햿Anti-skating (page 17)

햻

햴햶햳햲햵

햷

햸

햹

햺

햿

햽햾

Before you start | Parts and their functions

10 En

Back panel

햲z (power)

This turns the unit’s power on/off. (page 17)

햳DC IN jack

Connect the AC adaptor (supplied) to this jack. (page 14)

햴PHONO OUT jacks

These jacks output the playback audio of the record. (page 14)

햵PHONO EQ (phono equalizer) switch

As appropriate for the device that is connected, set this to switch the

signal that is output from the PHONO OUT jacks. (page 14)

햵햳햴햲

: on : off

11

English

En

Getting ready

Location

Because record playback is easily affected by vibration, you should place the unit in a level location that is not subject to external vibration.

Place it sufficiently far from your speaker system so that it will not be affected by sound pressure or vibration.

Assembly

Assembling the unit

1Lift up the platter.

2Reaching through the round hole in the platter, pull the belt

outward, hooking it over your finger.

3Insert the platter onto the center spindle.

CAUTION

Take care not to drop the platter. Dropping it might cause injury, or might

damage the unit.

1

2

33

Getting ready | Assembly

12 En

4Align the round hole of the platter with the pulley.

5Use your finger to hook the belt onto the pulley.

Take care that the belt is not twisted. After hooking the belt onto the

pulley, rotate the platter several times to ensure that the belt is smoothly

in place.

6Place the platter sheet on the platter.

7Attach the counter weight to the tone arm.

With the markings on the counter weight facing you, slide it onto the

back end of the tone arm.

8Attach the head shell to the tone arm.

Insert the head shell into the front end of the tone arm, and turn the lock

nut to secure it.

Pulley

Lock nut

Getting ready | Assembly

13

English

En

Attaching the dust cover

The dust cover protects this unit from dust etc.

1Insert the hinges into the appropriate locations at two sides of the

dust cover. 2Attach the dust cover by inserting the hinges into the hinge bases

located on the back panel of the unit.

NOTE

To remove the dust cover, grasp the two sides of the dust cover and slowly

lift upward to remove the cover together with its hinges.

CAUTION

Take care not to pinch your hands or fingers when opening or closing the

dust cover

Hinge base

Getting ready | Making connections

14 En

Making connections

NOTE

Also refer to the owner’s manuals of the device that you are

connecting.

CAUTION



Finish making all other connections before you connect the AC adaptor (supplied) to

an AC outlet.

Connected devices

 Devices not equipped with PHONO input jacks  Devices equipped with PHONO input jacks

PHONO EQ switch

setting ON (default) THRU

This unit’s equalizer

function Enabled

The signal from the cartridge is amplified by the phono

equalizer that is built into this unit, and is output from

the PHONO OUT jacks.

Disabled

The signal from the cartridge is output directly from the

PHONO OUT jacks.

AUX IN

R L

Pre-main amplifier or component

(external input jacks)

AC adaptor

(supplied)

RCA stereo cable

(supplied)

Connect to

AC outlet

This unit

(back panel)

PHONO IN

R L

AC adaptor

(supplied)

RCA stereo cable

(supplied)

Pre-main amplifier

(PHONO input jacks)

This unit

(back panel)

Connect to

AC outlet

Getting ready | Making adjustments

15

English

En

Making adjustments

Adjusting the stylus pressure

Adjust the tone arm so that the appropriate stylus pressure is applied to the

record.

1Detach the stylus cover.

NOTICE

Take care that the stylus cover or your finger do not contact the

stylus.

2Set the anti-skating adjustment to the “0” position.

3Release the tone arm lock.

4Move the tone arm off of the arm rest and slightly to the left.

NOTICE

Take care that the needle does not contact any part of the unit.

Getting ready | Making adjustments

16 En

5Turn the counter weight so that the tone arm is horizontal.

Toward 1: Counter weight moves forward on the tone arm.

Toward 2: Counter weight moves backward on the tone arm.

6Return the tone arm to the arm rest, and lock it in place.

7Turn the counter ring so that the “0” marking is aligned with the

center line on the back end of the tone arm.

NOTE

When turning the counter ring, use your fingers to press the counter

weight so that it does not rotate.

8By turning the counter weight, set the counter weight markings to

the stylus pressure specified for the cartridge.

The specified stylus pressure for the supplied cartridge is 3.5 g.

NOTE

Turning the counter weight also turns the counter ring.

Correct Tone arm is horizontal

(balanced)

Incorrect Counter weight is too far

forward

Incorrect Counter weight is too far

backward

1

2

Center line

Getting ready | Turning the power on

17

English

En

Adjusting the anti-skating

As the platter rotates, the tip of the stylus generates a force that pulls it toward

the center of rotation. If the anti-skating value is set to the same value as the

stylus pressure, a force is generated that pulls the tip of the stylus outward

away from the center of rotation, and the two forces cancel each other.

1Turn the anti-skating adjustment to the same value as the stylus

pressure of the cartridge.

Turning the power on

On the back panel of the unit, press z (power) to turn on the power of the unit.

18 En

Playback

Starting playback

1Open the dust cover, and place the record on the platter.

If you’re playing a 45 rpm record, use the supplied 45 rpm adaptor.

2Press 33/45 (speed) to select the appropriate speed for the record.

3Press PLAY/STOP (play/stop).

The platter rotates.

CAUTION

If you play back a record without sufficiently lowering the volume of your

amplifier, a loud sound might occur when the tip of the stylus contacts the

record. This can cause hearing loss and might damage your amplifier and

speaker, so be sure to lower the volume of your amplifier.

: 33 1/3 rpm : 45 rpm

Playback

19

English

En

4Release the tone arm lock, and raise the lift lever.

5Move the tone arm to the playback position of the record.

6Lower the lift lever.

The tone arm is lowered, and playback starts.

Playback

20 En

Pausing playback

If you raise the lift lever, the tone arm rises and playback pauses.

When you lower the lift lever, playback resumes.

Stopping playback

1Raise the lift lever.

2Return the tone arm to the arm rest.

3Lower the lift lever.

4Press PLAY/STOP (play/stop).

The platter stops rotating.

5Lock the tone arm.

NOTE

The tone arm does not automatically rise when the record finishes playing.

If you will not be using the unit for a time, attach the cover to the stylus to

protect it.

Страница загружается ...

Yamaha TT-S303 Инструкция по применению

Yamaha TT-S303 Инструкция по применению

на других языках

Похожие модели бренда

Модели других брендов