Tascam DR-05 Инструкция по применению

D01231600D

DR-05

Linear PCM Recorder

TEAC CORPORATION

https://tascam.jp/jp/

Phone: +81-42-356-9143

1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan

TEAC AMERICA, INC.

http://tascam.com/

Phone: +1-323-726-0303

1834 Gage Road, Montebello, California 90640 USA

TEAC MEXICO, S.A. de C.V.

http://teacmexico.net/

Phone: +52-55-5010-6000

Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán,

CP 04100, México DF, México

TEAC UK Ltd.

http://tascam.eu/

Phone: +44-8451-302511

2 Huxley Road, Surrey Research Park, Guildford, GU2 7RE,

United Kingdom

TEAC EUROPE GmbH

http://tascam.eu/

Phone: +49-611-71580

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

TEAC SALES & TRADING(SHENZHEN) CO., LTD

Phone: +86-755-88311561~2

Room 817, Block A, Hailrun Complex, 6021 Shennan Blvd., Futian District,

Shenzhen 518040, China

Printed in China

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

RUSSIAN

OWNER'S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

2 TASCAM DR-05

• TASCAM is a trademark of TEAC CORPORATION, registered in the U.S.

and other countries.

• microSDHC Logo is a trademark of SD-3C, LLC.

• MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS

and Thomson.

• Supply of this product does not convey a license nor imply any right to

distribute MPEG Layer-3 compliant content created with this product in

revenue-generating broadcast systems (terrestrial, satellite, cable and/

or other distribution channels), streaming applications (via Internet,

intranets and/or other networks), other content distribution systems

(pay-audio or audio-on-demand applications and the like) or on physical

media (compact discs, digital versatile discs, semiconductor chips, hard

drives, memory cards and the like). An independent license for such use is

required. For details, please visit http://mp3licensing.com.

• Other company names, product names and logos in this document are

the trademarks or registered trademarks of their respective owners.

TASCAM DR-05 3

Owner’s Manual

IMPORTANT SAFETY PRECAUTIONS

INFORMATION TO THE USER

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and

receiver.

c) Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV technician

for help.

CAUTION

Changes or modifications to this equipment not expressly

approved by TEAC CORPORATION for compliance could void

the user’s authority to operate this equipment.

For U.S.A.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME

A LA NORME NMB-003 DU CANADA.

Declaration of Conformity

Model Number : DR-05

Trade Name : TASCAM

Responsible party : TEAC AMERICA, INC.

Address : 1834 Gage Road, Montebello, California,

U.S.A.

Telephone number : 1-323-726-0303

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

This product complies with the European

Directives request and the other

Commission Regulations.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

iThe apparatus draws nominal non-operating power from

the AC outlet with its POWER or STANDBY/ON switch not in

the ON position.

iThe mains plug is used as the disconnect device, the

disconnect device shall remain readily operable.

iCaution should be taken when using earphones or

headphones with the product because excessive sound

pressure (volume) from earphones or headphones can

cause hearing loss.

iIf you are experiencing problems with this product, contact

TEAC for a service referral. Do not use the product until it

has been repaired.

CAUTION

iDo not expose this apparatus to drips or splashes.

iDo not place any objects filled with liquids, such as vases,

on the apparatus.

iDo not install this apparatus in a confined space such as a

book case or similar unit.

iThe apparatus should be located close enough to the AC

outlet so that you can easily grasp the power cord plug at

any time.

iIf the product uses batteries (including a battery pack or

installed batteries), they should not be exposed to sunshine,

fire or excessive heat.

4 TASCAM DR-05

iCAUTION for products that use replaceable lithium batteries:

there is danger of explosion if a battery is replaced with an

incorrect type of battery. Replace only with the same or

equivalent type.

CAUTIONS ABOUT BATTERIES

This product uses batteries. Misuse of batteries could cause a

leak, rupture or other trouble. Always abide by the following

precautions when using batteries.

iNever recharge non-rechargeable batteries. The batteries

could rupture or leak, causing fire or injury.

iWhen installing batteries, pay attention to the polarity

indications (plus/minus (¥/^) orientation), and install

them correctly in the battery compartment as indicated.

Putting them in backward could make the batteries rupture

or leak, causing fire, injury or stains around them.

iWhen you store or dispose batteries, isolate their terminals

with insulation tape or something like that to prevent them

from contacting other batteries or metallic objects.

iWhen throwing used batteries away, follow the disposal

instructions indicated on the batteries and the local disposal

laws.

iDo not use batteries other than those specified. Do not mix

and use new and old batteries or different types of batteries

together. The batteries could rupture or leak, causing fire,

injury or stains around them.

iDo not carry or store batteries together with small metal

objects. The batteries could short, causing leak, rupture or

other trouble.

iDo not heat or disassemble batteries. Do not put them in

fire or water. Batteries could rupture or leak, causing fire,

injury or stains around them.

iIf the battery fluid leaks, wipe away any fluid on the battery

case before inserting new batteries. If the battery fluid gets

in an eye, it could cause loss of eyesight. If fluid does enter

an eye, wash it out thoroughly with clean water without

rubbing the eye and then consult a doctor immediately. If

the fluid gets on a person’s body or clothing, it could cause

skin injuries or burns. If this should happen, wash it off with

clean water and then consult a doctor immediately.

iThe unit power should be off when you install and replace

batteries.

iRemove the batteries if you do not plan to use the unit for a

long time. Batteries could rupture or leak, causing fire, injury

or stains around them. If the battery fluid leaks, wipe away

any fluid on the battery compartment before inserting new

batteries.

iDo not disassemble a battery. The acid inside the battery

could harm skin or clothing.

8For European Customers

Disposal of electrical and electronic

equipment

(a) All electrical and electronic equipment should be

disposed of separately from the municipal waste stream

via designated collection facilities appointed by the

government or the local authorities.

(b) By disposing of the electrical and electronic equipment

correctly, you will help save valuable resources and

prevent any potential negative effects on human health

and the environment.

(c) Improper disposal of waste equipment can have serious

effects on the environment and human health as a result

of the presence of hazardous substances in electrical and

electronic equipment.

(d) The crossed out wheeled dust bin

symbol indicates that electrical and electronic

equipment must be collected and disposed of

separately from household waste.

(e) The return and collection systems are available

to the end users. For more detailed information

about disposal of old electrical and electronic equipment,

please contact your city office, waste disposal service or

the shop where you purchased the equipment.

Disposal of batteries and/or accumulators

(a) Waste batteries and/or accumulators should be disposed

of separately from the municipal waste stream via desig-

nated collection facilities appointed by the government

or the local authorities.

(b) By disposing of waste batteries and/or accumulators

correctly, you will help save valuable resources and

prevent any potential negative effects on human health

and the environment.

(c) Improper disposal of waste batteries and/or accumulators

can have serious effects on the environment and human

health as a result of the presence of hazardous substances

in batteries and/or accumulators.

(d) The crossed out wheeled dust bin

symbol indicates that batteries and/or

accumulators must be collected and disposed

of separately from household waste.

If the battery or accumulator contains more

than the specified values of lead (Pb), mercury

(Hg), and/or cadmium (Cd) defined in the Battery

Directive (2006/66/EC), then the chemical symbols for

lead (Pb), mercury (Hg) and/or cadmium (Cd) will be

indicated beneath the crossed out wheeled dust bin

symbol.

(e) The return and collection systems are available to the end

users. For more detailed information about disposal of

waste batteries and/or accumulators, please contact your

city office, waste disposal service or the shop where you

purchased them.

Pb, Hg, Cd

TASCAM DR-05 5

Contents

Introduction.......................................................................................... 6

Included items ..................................................................................... 6

Precautions for placement and use ............................................ 6

Beware of condensation .................................................................. 6

Cleaning the unit ................................................................................ 6

Using the TEAC Global Site ............................................................. 6

About microSD cards ........................................................................ 6

User registration ................................................................................. 6

Names and Functions of Parts ....................................................... 7

Top panel ............................................................................................................7

Front panel ......................................................................................................... 7

Rear panel ...........................................................................................................7

Left side panel..................................................................................................7

Right side panel ..............................................................................................7

Bottom Panel .................................................................................................... 7

Home Screen ........................................................................................ 8

Preparation ........................................................................................... 8

Powering the unit ..........................................................................................8

Starting up the unit ......................................................................................9

Selecting a language...................................................................................9

Setting the built-in clock ..........................................................................9

Shutting down ................................................................................................9

Connecting monitors and headphones.........................................9

Basic operation procedures ........................................................... 9

Menu structure................................................................................................9

Recording ............................................................................................10

Recording Screen .......................................................................................10

About recording standby ......................................................................10

Menu structure.............................................................................................10

Manually adjusting the input level..................................................10

Using the Level Control Function .................................................... 11

Recording ......................................................................................................... 11

Using the low-cut filter ........................................................................... 11

Playback ............................................................................................... 11

Playback Control screen ......................................................................... 11

Menu structure.............................................................................................12

Playing back recordings ......................................................................... 12

Adjusting the playback volume ........................................................ 12

Selecting files for playback (skipping) ..........................................12

Quick Operations .............................................................................. 12

QUICK button overview ......................................................................... 12

Connecting with a Computer ...................................................... 12

Connecting with a computer using USB ..................................... 12

Exchanging files with a computer ................................................... 12

Disconnecting from a computer ......................................................12

Settings and Information .............................................................. 12

Turning the built-in speaker off ......................................................... 12

System Settings ...........................................................................................12

Quick reference for using various functions.......................... 13

Message................................................................................................16

Troubleshooting ............................................................................... 17

Specifications ..................................................................................... 18

Ratings................................................................................................................18

Inputs and outputs .................................................................................... 18

Audio performance ...................................................................................18

Recording times...........................................................................................18

General .............................................................................................................. 18

Introduction

Thank you very much for purchasing the TASCAM DR-05 Linear

PCM Recorder.

Before connecting and using this unit, please take time to

read this manual thoroughly to ensure you understand how to

properly set it up and connect it, as well as the operation of its

many useful and convenient functions. After you have finished

reading this manual, please keep it in a safe place for future

reference.

This Owner's Manual explains the main functions of this unit.

Please see the Reference Manual for information about all the

unit's functions.

You can also download this Owner's Manual and the Reference

Manual from the TEAC Global Site (http://teac-global.com/).

Included items

This product includes the following items.

Take care when opening the package to avoid damaging the

items. Keep the packing materials for transportation in the

future.

Please contact the store where you purchased this unit if any

of these items are missing or have been damaged during

transportation.

iMain unit .......................................................................................................× 1

imicroSD card (in the unit) ..................................................................× 1

iAA alkaline batteries ..............................................................................× 2

iUSB cable (80 cm) ...................................................................................× 1

iOwner's Manual (this document)

including warranty .................................................................................× 1

6 TASCAM DR-05

Precautions for placement and use

iThe environmental temperature operating range of this unit

is 0–40°C (32–104°F).

iDo not install this unit in the following types of locations.

Doing so could degrade the sound quality and/or cause

malfunctions.

Places with significant vibrations

Near windows or other places exposed to direct sunlight

Near heaters or other extremely hot places

Extremely cold places

Places with bad ventilation or high humidity

Very dusty locations

iIf this unit is placed near a power amplifier or other device

with a large transformer, it could cause a hum. If this occurs,

increase the distance between this unit and the other

device.

iThis unit could cause color irregularities on a TV screen or

noise from a radio if used nearby. If this occurs, use this unit

farther away.

iThis unit might produce noise if a mobile phone or other

wireless device is used nearby to make calls or send or

receive signals. If this occurs, increase the distance between

this unit and those devices or turn them off.

iTo enable good heat dissipation, do not place anything on

top of this unit.

iDo not place this unit on top of a power amplifier or other

device that generates heat.

Beware of condensation

If the unit is moved from a cold to a warm place, or used

after a sudden temperature change, there is a danger of

condensation; vapor in the air could condense on the internal

mechanism, making correct operation impossible. To prevent

this, or if this occurs, let the unit sit for one or two hours at the

new room temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe with

chemical cleaning cloths, thinner, alcohol or other chemical

agents. Doing so could damage the surface or cause discolor-

ation.

Using the TEAC Global Site

You can download this Owner’s Manual and the Reference

Manual necessary for this unit from the TEAC Global Site (http://

teac-global.com/).

1. Open the TEAC Global Site (http://teac-global.com/).

2. In the TASCAM Downloads section, click the desired

language to open the Downloads website page for that

language.

NOTE

If the desired language does not appear, click Other

Languages.

3. Click the product name in the “Search by Model Name”

section to open the Downloads page for that product.

4. Select and download the Owner’s Manual and the

Reference Manual that are needed.

About microSD cards

Please refer to the TEAC Global Site (http://teac-global.com)

to learn more on the list of compatible SD cards, or contact the

TASCAM customer support service.

User registration

Customers in the USA, please visit the TASCAM website (http://

tascam.com/) to register as a user online.

Names and Functions of Parts

Top panel

1 Built-in stereo microphone

Omnidirectional stereo electret condenser microphone.

2 PEAK indicator

Lights when the input volume is too high.

3 Display

4 ¤(HOME) [8] button

5 + button

6 MENU button

7 . button

8 PB CONT button

9 – button

0 REC indicator

The indicator flashes during recording standby.

The indicator lights while recording.

TASCAM DR-05 7

q RECORD [0] button

w QUICK button

e / button

r 7 button

t MARK button

Front panel

y Strap attachment

Rear panel

u MIC/EXT IN jack

Left side panel

i /LINE OUT jack

o HOLD switch

Right side panel

p USB port

a microSD card slot

Bottom Panel

s Mono speaker

d Tripod attachment screw thread (1/4-inch)

f Battery compartment

Home Screen

This is the screen that is usually shown when the unit is

stopped.

1 Playback speed setting status

One of the following icons appears according to the

playback speed setting.

Icon Playback speed

×1.0

×1.1 – ×1.5

×0.5 – ×0.9

Playback speed not controllable

2 Loop/repeat playback status

: Single playback

: Single track repeat playback

: All track repeat playback

: Loop playback

3 Monitor Mix function status

: Monitor Mix off

: Monitor Mix on

4 Effect on/off status

This icon shows whether the effect is on or off.

: built-in effect off

: built-in effect on

8 TASCAM DR-05

5 Power supply status

When a battery is being used, a battery icon shows the

amount of battery power remaining in bars ( , , ).

The battery is almost dead and the power will soon turn off

if the icon has no bars .

When using a TASCAM PS-P520E AC adapter (sold

separately) or USB bus power, appears.

6 Recorder operation status

This icon shows the recorder operation status.

Indicator Meaning

8Stopped

9Paused

7Playing back

,Searching forward

mSearching backward

/Skipping forward

.Skipping backward

7 Level meter

These show the levels of the input and playback signals.

When the Monitor Mix function is ON, the level of the

combined input and playback sounds is shown.

8 File information

The file name or tag information of the file currently being

played back is shown.

9 Playback position

The current playback position is shown by a bar.

0 Elapsed time

Shows the elapsed time (hours: minutes: seconds) of the

currently playing track.

q Remaining time

Shows the remaining playback time of the current track

(hours: minutes: seconds).

w Peak value in decibels (dB)

The maximum level that occurs in a fixed period of time is

displayed digitally.

e Monitoring output

: Signal output from headphones

: Signal output from the built-in speaker

r Playback area

This shows the current playback file area.

ALL All files in the MUSIC folder

FOLDER All files in the selected folder

P.LIST All files added to the playlist

t Loop playback IN (starting) and OUT (ending) points

The set starting and ending points of the loop are shown.

When the IN point is set, the icon appears at the

corresponding position.

When the OUT point is set, the icon appears at the

corresponding position.

y Playback file number/total number of files

The total number of files in the playback area and the

number of the current file are shown.

Preparation

Powering the unit

8Using AA batteries

1. Slide open the battery compartment cover on the back of

the unit.

2. Install 2 AA batteries with their ¥ and ^ marks as shown

in the battery compartment .

3. Close the battery compartment cover.

iUse the BATTERY TYPE item of the SYSTEM menu to set

the type of battery in order to accurately show the amount

of power remaining and allow the unit to accurately

determine whether enough power is available for proper

operation. (By default, this is set to “ALKAL” for alkaline

batteries.)

Starting up the unit

Press and hold the ¤(HOME) [8] button until TASCAM

DR-05 (start-up screen) appears.

The Home Screen appears when the unit starts up.

TASCAM DR-05 9

Selecting a language

The first time you turn a new unit on after purchase, the

following setting must be made.

A screen appears to set the language shown on the display.

Press the + or − button to move the cursor and select (highlight

with light letters on a black background) the language to be

shown on the display.

English : use English

日本語

: use Japanese

Français : use French

Español : use Spanish

Deutsch : use German

Italiano : use Italian

Русский

: use Russian

中文 : use Chinese

After selection, press the 7 button to confirm it.

NOTE

You can change this setting with the SYSTEM screen

LANGUAGE item. (See “Quick reference for using various

functions” on page 15.)

Setting the built-in clock

When the unit is started up for the first time (or when the

built-in clock is reset after being left unused without batteries),

the DATE/TIME screen appears before the start-up screen to

allow the date and time to be set.

Use the .// and +/− buttons to set the date and time,

and press the 7 button to confirm.

Shutting down

Press and hold the ¤(HOME) [8] button until LINEAR PCM

RECORDER appears on the display.

The power turns off after the unit completes its shutdown

process.

Connecting monitors and headphones

To listen with headphones, connect them to the /LINE OUT

jack.

To listen with an external monitoring system (powered monitor

speakers or an amplifier and speakers), connect it to the /

LINE OUT jack.

Headphones Powered monitor speakers

or amplifier and speakers

Basic operation procedures

1. Press the MENU button to open the MENU screen.

2. Use the + and – buttons to select (highlight) menu items,

and use the 7 button to open that setting screens.

3. Use the + and – buttons to select (highlight) the setting

item, and press the 7 button.

4. Use the / or 7 button to move the cursor to the right

and highlight the setting value.

5. Use the + and – buttons to change the setting.

6. Press the . button to move the cursor left if you want

to set a different item in the same menu.

7. Repeat step 3 to 6 as necessary to set other items as

necessary.

8. When finished, press the ¤(HOME) [8] button to

return to the Home Screen.

Menu structure

MENU

REC SETTING Make recording settings

PLAY SETTING Make playback settings

BROWSE Work with files and folders on the

SD card

SPEAKER Turn the built-in speaker on/off

OTHERS Open the OTHERS submenu

INFORMATION View information

MONITOR MIX Set the monitor mix function

TUNER Use the tuner

EFFECT Make effect settings

FILE NAME Make file name settings

DATE/TIME Set the date and time

SYSTEM Make system settings

10 TASCAM DR-05

Recording

Recording Screen

This screen appears when recording or in recording standby.

1 Level control function status

: Level control off

: Peak reduction on

: Automatic level control on

: Limiter on

2 Plug-in power status

: Plug-in power off

: Plug-in power on

3 Pre or Auto recording function status

appears when the prerecording function is ON.

appears when the auto recording function is ON,

and the unit is recording.

4 Low cut filter on/off status

: Low cut filter off

: Low cut filter on

5 Auto tone function status

This icon shows whether the auto tone function is on or

off. (See "Using the auto tone function" in the Reference

Manual.

: Auto tone off

: Auto tone on

6 Recorder operation status

This icon shows the recorder operation status.

Indicator Meaning

8Recording standby

9Recording paused (recording standby)

0Recording

7 Level meters

The input signal levels are shown.

When overdubbing, the levels of the mixed input and

playback sounds are shown.

8 File name

The file name that will automatically be given to the

recorded file is shown.

9 Recording mode

The recording file format, sampling frequency and stereo/

mono ( ST / MONO ) status are shown.

0 Elapsed recording time

The elapsed recording time of the file appears as hours:

minutes: seconds.

q Remaining recording time

The remaining recording time until the selected maximum

file size is reached is shown (in hours: minutes: seconds).

If the remaining recording time on the microSD card is

less, however, the remaining recording time on the card is

shown.

w Peak value in decibels (dB)

The peak recording level value is shown digitally.

e Input level button display

The . and / buttons are shown as a reminder that

they can be used to change the input level.

About recording standby

This unit has a recording standby function like that of a profes-

sional recorder. In recording standby mode, you can adjust the

input level, for example, and then start recording quickly.

When in recording standby, the REC indicator blinks and the

recording screen appears.

Menu structure

REC SETTING

FORMAT Set the file format

WAV : 16bit / 24bit,

MP3 : 32 – 320k bps

SAMPLE Set the sampling frequency

4 4 .1 k / 48k / 96k (Hz)

(96kHz for WAV only)

TYPE Set to mono or stereo

MONO , STEREO

SIZE Set the maximum file size

64M / 128M / 256M / 512M / 1G / 2G(B)

MIC POWER Turn plug-in power on/off

ON , OFF

LOW CUT Set the low-cut filter

OFF , 40Hz , 80Hz , 120Hz

PRE REC Set the pre-recording function

ON , OFF

AUTO TONE Set the auto tone function

OFF , HEAD , HEAD+TAIL

TONE SECS Set the length of the auto tone

0.5SEC. , 1SEC. , 2SEC. , 3SEC.

TONE VOL Set the volume of the auto tone

-12dB , -18dB , -24dB , -30dB , -36dB

AUTO REC Set the auto-recording function

MODE : OFF , NEW FILE , MARK

LEVEL : -6dB , -12dB , -24dB , -48dB

Manually adjusting the input level

1. Press the RECORD [0] button to enter recording standby.

2. Use the . and / buttons to adjust the input level.

Meters that show the input level settings appear at the

bottom of the display.

If the input is too high, the PEAK indicator on the upper left

above the display lights just before recorded sound would

distort.

A b mark is provided at -12dB on the level meters. Set the

recording level so that level changes occur near this mark

without causing the PEAK indicator to light red.

TASCAM DR-05 11

Using the Level Control Function

You can set the level control function for recording through a

microphone.

1. Press the RECORD [0] button to begin recording standby.

2. Press the QUICK button to open the quick menu.

3. Select (highlight) LEVEL CTRL and press the 7 button to

open the settings screen.

4. Use the + and − buttons to select (highlight) the desired

function, and press the 7 button to enable it and return

to the recording screen.

8PEAK REDUCTION

The input volume is reduced automatically to an appropriate

level when excessively large signals come in. The recording

level can be raised manually when desired. This function is

suitable for recording music with volume changes that affect

the sound negatively. After making the setting, the set level is

retained even if it is turned off.

8AUTO LEVEL

Using this function, the recording level is automatically

increased when the input sound is too quiet or decreased

when it is too loud. This function is useful for recording

meetings, for example. In this mode, the recording level cannot

be changed manually.

8LIMITER

This function prevents distortion when signals that are too

loud are input suddenly. This is useful when you do not want

to change the recording level.

In this mode, the recording level can be changed manually

even when recording.

Recording

1. Press the RECORD [0] button to enter recording standby.

2. Press the RECORD [0] button again to start recording.

3. Press the ¤(HOME) [8] button to finish recording.

When recording starts, the REC indicator lights continuously,

and the display shows the elapsed recording time and the

remaining recording time.

8Pausing recording

You can pause recording and then continue recording in the

same file.

1. When recording, press the RECORD [0] button again.

2. Press the RECORD [0] button again to resume recording.

Using the low-cut filter

Use the low-cut filter if you want to cut noise and other sounds

at low frequencies. This function can be used to reduce air-con-

ditioning noise and unpleasant wind noise, for example.

1. Select MENU w REC SETTING and press the 7 button.

2. Set the LOW CUT item on the REC SETTING screen.

Options : 40Hz , 80Hz , 120Hz , OFF

The higher the number (frequency) is, the wider the band of

low frequencies that will be cut.

Playback

Playback Control screen

During playback or when stopped, press the PB CONT button

to open the Playback Control screen.

Recording is not possible when this screen is open. Use the

. and / buttons to skip to IN/OUT points and the file

beginning/end. You cannot skip to the previous or next file.

1 Loop playback status

The icon appears when loop playback is enabled.

2 Playback speed

This shows the playback speed as a multiple of the normal

speed. VSA appears on the left when variable speed

audition, which allows tempo to be changed without

changing pitch, is enabled.

3 Playback position display

The current playback position is shown by a bar.

4 Loop playback IN (starting) and OUT (ending) points

The set IN (starting) and OUT (ending) points of the loop are

shown.

When the IN point is set, the icon appears at the corre-

sponding position.

When the OUT point is set, the icon appears at the corre-

sponding position.

5 Usable buttons

The shown buttons are available when the Playback Control

screen is open.

MARK : Create or delete an IN or OUT point.

MENU : Turn loop playback ON or OFF.

12 TASCAM DR-05

Menu structure

PLAY SETTING

AREA Set the playback area

ALL FILES , FOLDER , PLAYLIST

REPEAT Set the repeat mode

CONTINUOUS , SINGLE ,

1 REPEAT , ALL REPEAT

PLAYEQ Set the playback equalizer

OFF , TREBLE + / - , MIDDLE + / - ,

BASS + / -

JUMPBACK Set jump-back playback

OFF , 1SEC. – 10SEC. , 20SEC. , 30SEC.

Playing back recordings

When the Home Screen is open and playback is stopped, press

the 7 button to start playback.

8Pausing

When the Home Screen is open and a track is playing back,

press the ¤(HOME) [8] button to pause playback at the

current position.

8Stopping

Press the ¤(HOME) [8] button when paused to return to

the beginning of the playback file and stop.

8Searching backward and forward

When the Home Screen is open and a track is playing back or

stopped, press and hold the . or / button to search

backward or forward.

Adjusting the playback volume

When the Home Screen is open, use the + and − buttons to

adjust the volume.

Selecting files for playback (skipping)

When the Home Screen is open, use the . and /

buttons to select the file that you want to play.

Press the . button when located at the beginning of a file

to skip to the beginning of the previous file.

When the Home Screen is open during playback, press the

/ button to skip to the next file.

Quick Operations

QUICK button overview

The QUICK button provides convenient access to functions

according to the situation.

Screen State Action

Home

Screen

Stop

Pause

Show delete, divide and level

alignment functions

Playing back Show level alignment functions

Recording

standby Show the level control function

Recording Creates a new file and continue

recording (track increment)

Playback Control Opens menu with just the level

alignment function

BROWSE , PLAYLIST Opens pop-up menu for working

with selected file (or folder)

TUNER Switches between CALIB and

INPUT LEVEL items

MENU screen,

OTHERS submenu,

other settings screens

—

Connecting with a Computer

You can transfer audio files on the microSD card in the unit to

a computer, as well as transfer audio files from the computer to

the unit.

Connecting with a computer using USB

1. Use the included USB cable to connect the unit to a

computer. If the power is off, turn it on.

2. On the USB SELECT screen, select STORAGE, and press

the 7 button to connect this unit to the computer. “USB

connected” will appear on the display.

3. This unit appears on the computer screen as an external

volume named “DR-05.”

Exchanging files with a computer

Click the “DR-05” drive on the computer screen to show the

“MUSIC” and “UTILITY” folders.

To transfer files to the computer, open the “MUSIC” folder and

drag and drop the desired files to destinations of your choice.

To transfer files from the computer, drag and drop the audio

files on the computer that you want to the “MUSIC” folder.

Disconnecting from a computer

Before disconnecting the USB cable, use the proper procedures

for the computer to unmount this unit.

The power turns off after the unit completes its shutdown

process.

See the computer’s operation manual for instructions about

how to unmount an external volume.

Settings and Information

Turning the built-in speaker off

Open MENU w SPEAKER w SPEAKER and set it to OFF.

System Settings

Use the SYSTEM menu to make various settings to use the unit

as you like. You can also initialize settings and format microSD

cards, for example.

1. Select MENU w OTHERS w SYSTEM and press the 7

button.

2. Make the necessary settings using the various functions.

TASCAM DR-05 13

Quick reference for using various functions

iButton names are shown like this: MENU.

iInstructions are abbreviated. For example, On the Home Screen, press the MENU button. select the REC SETTING menu, and then select the PRE REC item becomes: Home Screen w MENU w

REC SETTING w PRE REC.

iNot all steps are given for complex operations. For detailed operation procedures, see the Reference Manual.

Category Desired action Function name Procedures, buttons used and explanation

Basic functions

Return to the Home Screen HOME

Return to the Home Screen if you become unsure about how to proceed.

Record Home Screen w RECORD w RECORD

Recording will start using the current settings.

Play back a recording Home Screen w PLAY

Play the file shown (selected).

Adjust the playback volume Home Screen w + / −

Adjust the volume of headphones, speakers, etc.

Select a file for playback Home Screen w . and /

If there a many files, using the browse function might be more convenient.

Recording

Change the file format Home Screen w MENU w REC SETTING w FORMAT

Set the file format used for recordings, including whether they are uncompressed (WAV) or compressed (MP3).

Use the low-cut filter Low cut filter Home Screen w MENU w REC SETTING w LOW CUT

This function removes noise and other sounds at low frequencies. Set the cutoff frequency.

Adjust the input level

manually

Home Screen w RECORD w . and /

Watch the meters and set the recording level so that they do not peak.

Adjust the input level

automatically

Peak reduction Home Screen w RECORD w QUICK w PEAK REDUCTION

This function automatically lowers the level when the recording level would overload.

Adjust the input level

automatically

Auto level Home Screen w RECORD w QUICK w AUTO LEVEL

This function automatically adjusts the level in response to the loudness of the input signal.

Adjust the input level

automatically

Limiter Home Screen w RECORD w QUICK w LIMITER

This function compresses only loud sounds to prevent overloads and does not change the recording level.

Record input sound over

playback sound

Overdubbing Home Screen w MENU w OTHERS w MONITOR MIX

This function records a mix of the audio file playing back with the input signal as a new file.

14 TASCAM DR-05

Category Desired action Function name Procedures, buttons used and explanation

Other recording

features

Add a mark during recording Mark Recording Screen w MARK

This function adds a mark to the file that can be used as an index during playback.

Create a new file manually

while recording

Manual track incremen-

tation

Recording Screen w QUICK

Use this function if you want to create a new file without interrupting recording when, for example, the song changes.

Set automatic file division Automatic track incremen-

tation

Home Screen w MENU w REC SETTING w SIZE

This function can be used to automatically create a new file when the set size is reached.

Start recording a moment

before pressing RECORD

Pre-recording Home Screen w MENU w REC SETTING w PRE REC

When the unit is in recording standby, this function allows the unit to record a few seconds before the record button is

pressed.

Use the self-timer to record Self-timer Home Screen w RECORD w PB CONT

This self-timer function is convenient when you want to record your own performance.

Automatically start recording

when sound is input

Auto recording Home Screen w MENU w REC SETTING w AUTO REC w MODE

This function can automatically start and pause recording, create new files and add marks in response to the input sound

level.

Other playback

features

Enable repeat playback Repeat playback Home Screen w MENU w PLAY SETTING w REPEAT

This function allows you to repeat playback of a specific file.

Repeat playback between two

points in a file

Loop playback Playback Control screen w PB CONT w MARK

This function allows you to repeat playback of a specific interval in a single file.

Change playback speed VSA Playback Control screen w PB CONT w + / –

This function allows you to change the speed of playback.

Use the playback equalizer Playback equalizer Home Screen w MENU w PLAY SETTING w PLAYEQ

This function allows you to increase or decrease the levels of the high or low frequencies during playback to improve the

sound quality.

Go back a few seconds during

playback and play that part

again

Jump-back playback During playback w PLAY

When used during playback, this function allows you to go back and play the preceding few seconds again.

Change the jump-back

playback settings

(Jump-back playback) Home Screen w MENU w PLAY SETTING w JUMPBACK

You can set how many seconds to go back when using the jump-back playback function.

Even out the volume during

playback

Level alignment Home Screen w QUICK w LEVEL ALIGN

This function makes recordings sound more even by adjusting the playback volume according to volume during playback.

Select a playback area Home Screen w MENU w PLAY SETTING w AREA

You can select a folder or playlist as the play area from which files can be chosen.

Other features

Listen to playback and input

sounds at the same time

Monitor mix Home Screen w MENU w OTHERS w MONITOR MIX

This function allows you to listen to both the input and playback sounds at the same time.

Tune an instrument Chromatic tuner Home Screen w MENU w OTHERS w TUNER

You can use this unit to help tune a guitar or other instrument.

Add reverb to a sound Effect Home Screen w MENU w OTHERS w EFFECT

This function adds reverb to the input signal or playback sound.

TASCAM DR-05 15

Category Desired action Function name Procedures, buttons used and explanation

File

operations

Check file information Home Screen w MENU w BROWSE w + / – w QUICK w INFO

Use this function to check the date of recording and file size, for example.

Add a file to the playlist Home Screen w MENU w BROWSE w + / – w QUICK w ADD LIST

You can make a playlist that includes specific files.

Delete a file Home Screen w MENU w BROWSE w + / – w QUICK w DELETE

You can delete files that you do not need.

Delete a file Home Screen w QUICK w DELETE

You can delete files that you do not need.

Delete all files in a folder at the

same time

Home Screen w MENU w BROWSE w + / – w QUICK w ALL DEL

You can delete all the files in a folder at the same time.

Divide a file Divide Home Screen w QUICK w DIVIDE

Use this function to divide one file into two files.

Unit settings

Set the language shown Home Screen w MENU w OTHERS w SYSTEM w LANGUAGE

Use this to set the language shown on the display.

Set the date and time Home Screen w MENU w OTHERS w DATE/TIME

Use this function to set the internal clock, which is used for the recording dates written to files, for example.

Turn the speaker off Home Screen w MENU w SPEAKER w OFF

Do this to stop sound output from the speaker in the back of the unit.

Turn plug-in power on Home Screen w MENU w REC SETTING w MIC POWER

Make this setting when using an external mic that requires plug-in power.

Check information about the

unit and the card.

Home Screen w MENU w OTHERS w INFORMATION

Use this function to check the unit firmware version and the amount of remaining space on the card, for example.

Change the power saving

function setting

Automatic power saving Home Screen w MENU w OTHERS w SYSTEM w AUTO PWR SAVE

This function automatically turns the unit off when it is not used for some time.

Change the backlight setting Home Screen w MENU w OTHERS w SYSTEM w BACKLIGHT

Use this to change the display backlight setting.

Adjust the display contrast Home Screen w MENU w OTHERS w SYSTEM w CONTRAST

Use this to set the contrast of the characters on the display.

Set the battery type Home Screen w MENU w OTHERS w SYSTEM w BATTERY TYPE

Select the type of battery being used. This setting affects the accuracy of the remaining battery display.

Restore the unit to its default

settings

Initialize Home Screen w MENU w OTHERS w SYSTEM w INITIALIZE

Use this function to restore all settings to their factory defaults.

Quickly format an microSD

card

Quick format Home Screen w MENU w OTHERS w SYSTEM w QUICK FORMAT

Use this function to format cards. You should usually use the quick format function to format a card.

Completely format an

microSD card

Full format Home Screen w MENU w OTHERS w SYSTEM w FULL FORMAT

Use this only when you want to completely erase the data on a card.

Set the file name format Home Screen w MENU w OTHERS w FILE NAME

You can change the characters used in the file names that are automatically assigned.

16 TASCAM DR-05

Message

The following is a list of the pop-up messages that might appear on the DR-05 under certain

conditions.

Refer to this list if one of these pop-up messages appears and you want to check the meaning or

determine a proper response.

Message Meaning and response

File Name Err

The DIVIDE function would cause the file name to exceed 200

characters. The DIVIDE function adds "_a” or “_b” to the end of the file

name. Before choosing the DIVIDE function, connect the unit to a

computer and edit the file name to less than 198 characters.

Dup File Name

The DIVIDE function would cause the file name to be the same as that

of an existing file in the same folder. The DIVIDE function adds "_a” or

“_b” to the end of the file name. Before choosing the DIVIDE function,

connect the unit to a computer and edit the file name.

File Not Found The file added to the playlist cannot be found or a file could be

damaged. Please check that file.

Non-Supported

The audio file is not a supported format. Please see "10 – Connecting

with a Computer" in the Reference Manual for file formats that this unit

can use.

Battery Empty The batteries are almost out of power. Replace the batteries.

I/O Too Short The IN and OUT points are too close together. Set them with at least 1

second between them.

File Not Found

PLAYLIST

A file in the Playlist cannot be found. Please confirm that the file is still

in the Music folder.

No PLAYLIST No files have been added to the Playlist. Add a file to the Playlist or

change the play mode to something besides PLAYLIST.

PLAYLIST FILL The playlist is full. You cannot add more than 99 tracks to the Playlist.

MBR ERROR

Init CARD

The card is not formatted properly or the formatting is broken. Change

the card or press the 7 button while this message is being shown to

format the card.

Formatting will erase all the data on the card.

Format Error

Format Card

The card is not formatted properly or the card might be broken. This

message also appears if the card was formatted using a computer

connected by USB and if an unformatted card is inserted in the unit.

Always use the DR-05 to format cards to be used with it. Change the

card or press the 7 button while this message is being shown to

format the card.

Formatting will erase all the data on the card.

File Not Found

Make Sys File

The system file is missing. This unit requires a system file for operation.

When this message appears, press the 7 button to automatically

create a system file.

Message Meaning and response

Invalid SysFile

Make Sys File

The system file required to operate this unit is invalid. When this

message appears, press the 7 button to automatically create a new

system file.

Invalid Card

Change Card Something might be wrong with the card. Change the card.

Write Timeout Writing to the card timed out.

Backup files on the card to a computer, and format the card.

Card Full The card has no remaining capacity. Erase unnecessary files or move

them to a computer to make open space.

Can't Divide The selected division point is not suitable. (It is too close to the

beginning or end of the track.)

Max File Size

The file is larger than the designated size, or the recording time has

exceeded 24 hours when the total number of folders and files was

already at the limit (5000).

File Full The total number of folders and files exceeds 5000. Erase unnecessary

folders and files or move them to a computer.

Card Error The card could not be recognized properly. Change the card.

File Protected The file is read only and cannot be erased.

No Card No card is in the unit, so recording is not possible.

No MUSIC File There is no playback file, so DIVIDE cannot be executed.

If any other error occurs, turn the unit off and restart it.

TASCAM DR-05 17

Troubleshooting

If you are having trouble with the operation of this unit, please

try the following before seeking repair. If these measures do

not solve the problem, please contact the store where you

bought the unit or TEAC customer support.

8The unit will not turn on.

Confirm that the batteries are not dead.

iConfirm that the batteries are installed with the correct

¥/^ orientation.

iConfirm that the AC adapter (TASCAM PS-P520E, sold

separately) is securely connected to both the outlet and the

unit.

iWhen using USB bus power, confirm that the USB cable is

securely connected.

iWhen using USB bus power, confirm that it is not connected

via a USB hub.

iConfirm that the HOLD switch is not set in the direction of

the arrow.

8The unit turns off automatically.

Is the automatic power saving function on? See "Setting the

automatic power saving function" in "11 − Settings and Infor-

mation" of the Reference Manual.

iSince this unit complies with the European Standby Power

Regulations (ErP), the automatic power saving function

operates regardless of whether the unit is being powered

by an AC adapter or batteries. If you do not want to use

the automatic power saving function, set it to "OFF". (The

factory default setting is "30min".)

8The unit does not function.

iConfirm that the HOLD switch is not set in the direction of

the arrow.

iIs the unit connected to a computer by a USB cable? (Does

"USB connected" appear on the display?)

8The microSD card is not recognized.

iConfirm that the microSD card is inserted completely.

8Playback is not possible.

iIf you are trying to play a WAV file, confirm that the sampling

frequency is supported by this unit.

iIf you are trying to play an MP3 file, confirm that the bit rate

is supported by this unit.

8No sound is output from the speaker.

iAre headphones connected?

iIs SPEAKER set to OFF?

iCheck the connections with the monitoring system.

iIs the volume of the monitoring system minimized?

iIs the OUTPUT LEVEL setting of the unit minimized?

8Recording is not possible.

iIf you are using an external device, check the connection

again.

iCheck the input settings again.

iConfirm that the recording level is not too low.

iConfirm that the microSD card is not full.

iConfirm that the number of files has not reached the

maximum that the unit can handle.

8The recording level is low.

iConfirm that the input level setting is not too low.

iConfirm that the output level of any connected device is

not too low.

8The sound I am trying to record sounds

distorted.

iConfirm that the input level setting is not too high.

iConfirm that an effect is not being used.

8The playback sounds unnatural.

iConfirm that the playback speed has not been changed.

iConfirm that the playback equalizer is not enabled.

iConfirm that the level alignment function is not enabled.

iConfirm that an effect is not being used.

8I cannot erase a file.

iConfirm that you are not trying to erase a file that has been

copied from a computer after being write-protected.

8This unit’s files do not appear on the

computer.

iConfirm that the unit is connected to the computer using

its USB port.

iConfirm that no USB hub is being used.

iConfirm that the unit is not recording or in recording

standby mode.

8The wrong language was set accidentally.

iAfter pressing the ¤(HOME) [8] button to turn the unit

off, press the ¤(HOME) [8] button while pressing and

holding the MENU button.

The language selection menu will appear, and you will be

able to select the language.

18 TASCAM DR-05

Specifications

Ratings

8Recording media

microSD card (64 MB−2 GB)

microSDHC card (4 GB−32 GB)

8Recording/playback formats

WAV: 44.1/48/96kHz, 16/24 bit

MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kbps

8Number of channels

2 channels (stereo)

Inputs and outputs

8MIC/EXT IN jack (can provide plug-in

power)

Connector: 1/8” (3.5mm) stereo mini jack

8/LINE OUT jack

Connector: 1/8” (3.5mm) stereo mini jack

8Built-in speaker

0.3W (mono)

8Control input/output ratings

8USB port

Connector: Mini-B type

Format:

USB 2.0 HIGH SPEED mass storage class

Audio performance

8Frequency response

20-20 kHz +1/−3 dB

(EXT IN to LINE OUT, 44.1kHz sampling frequency, JEITA*)

20-22 kHz +1/−3 dB

(EXT IN to LINE OUT, 48kHz sampling frequency, JEITA*)

20-40 kHz +1/−3 dB

(EXT IN to LINE OUT, 96kHz sampling frequency, JEITA*)

8Distortion

0.05% or less

(EXT IN to LINE OUT, 44.1/48/96kHz sampling frequency, JEITA*)

8S/N ratio

92 dB or higher

(EXT IN to LINE OUT, 44.1/48/96kHz sampling frequency, JEITA*)

* based on JEITA CP-2150

Recording times

File format (recording setting) Capacity

4 GB

WAV 16-bit (STEREO) 44.1kHz 6:44:00

WAV 24-bit (STEREO) 96kHz 2:04:00

MP3 (STEREO/MONO)

320kbps

44.1kHz

48kHz 29:48:00

iThe recording times shown above are estimates. They might

differ depending on the microSD/microSDHC card in use.

iThe recording times shown above are not continuous

recording times, but rather they are the total possible

recording times for the microSD/microSDHC card.

General

8Power

2 AA batteries (alkaline or NiMH)

USB bus power from a computer

AC adapter (TASCAM PS-P520E, sold separately)

8Power consumption

1.7 W (maximum)

8Battery operation time (continuous operation)

iUsing alkaline batteries (EVOLTA)

Format Operation

time Note

Recording WAV, 44.1kHz,

16-bit

About 17.5

hours

Recording with

built-in mic

Playback WAV, 44.1kHz,

16-bit

About 19.5

hours

Using built-in

speaker

Recording: JEITA recording time

Playback: JEITA music playback time

iUsing NiMH battery (eneloop)

Format Operation

time Note

Recording WAV, 44.1kHz,

16-bit

About 15.5

hours

Recording with

built-in mic

Playback WAV, 44.1kHz,

16-bit

About 16.5

hours

Using built-in

speaker

Recording: JEITA recording time

Playback: JEITA music playback time

NOTE

The battery operation times (during continuous

operation) could vary depending on the media being

used.

8Dimensions (W × H × D)

61 × 141 × 26 mm

8Weight

116 g (not including batteries)

8Operating temperature range

0°C–40°C (32°F–104°F)

iIllustrations in this manual might differ in part from the

actual product.

iSpecifications and external appearance might be changed

without notification to improve the product.

iDetailed specifications are provided in the Reference

Manual.

TASCAM DR-05 19

Mode d'emploi

PRÉCAUTIONS DE SÉCURITÉ

IMPORTANTES

Pour le Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME

À LA NORME NMB-003 DU CANADA.

Ce produit est conforme aux directives

européennes et aux autres réglementa-

tions de la Commission européenne.

INSTRUCTIONS DE SÉCURITÉ

IMPORTANTES

1 Lisez ces instructions.

2 Conservez ces instructions.

3 Tenez compte de tous les avertissements.

4 Suivez toutes les instructions.

5 N'utilisez pas cet appareil avec de l'eau à proximité.

6 Ne nettoyez l'appareil qu'avec un chiffon sec.

7 Ne bloquez aucune ouverture de ventilation. Installez-le

conformément aux instructions du fabricant.

8 Ne l'installez pas près de sources de chaleur telles que

des radiateurs, bouches de chauffage, poêles ou autres

appareils (y compris des amplificateurs) dégageant de la

chaleur.

9 Ne neutralisez pas la fonction de sécurité de la fiche

polarisée ou de terre. Une fiche polarisée a deux broches,

l'une plus large que l'autre. Une fiche de terre a deux

broches identiques et une troisième broche pour la mise

à la terre. La broche plus large ou la troisième broche

servent à votre sécurité. Si la fiche fournie n'entre pas dans

votre prise, consultez un électricien pour le remplacement

de la prise obsolète.

10 Évitez de marcher sur le cordon d'alimentation et de

le pincer, en particulier au niveau des fiches, des prises

secteur, et du point de sortie de l'appareil.

11 N'utilisez que des fixations/accessoires spécifiés par le

fabricant.

12 Utilisez-le uniquement avec des

chariots, socles, trépieds, supports

ou tables spécifiés par le fabricant

ou vendus avec l'appareil. Si un

chariot est utilisé, faites attention

à ne pas être blessé par un

renversement lors du

déplacement de l'ensemble chariot/appareil.

13 Débranchez cet appareil en cas d'orage ou de non

utilisation prolongée.

14 Confiez toute réparation à des techniciens de

maintenance qualifiés. Une réparation est nécessaire si

l'appareil a été endommagé d'une quelconque façon,

par exemple si le cordon ou la fiche d'alimentation est

endommagé, si du liquide a été renversé sur l'appareil

ou si des objets sont tombés dedans, si l'appareil a été

exposé à la pluie ou à l'humidité, s'il ne fonctionne pas

normalement, ou s'il est tombé.

iL’appareil tire un courant nominal de veille de la prise

secteur quand son interrupteur POWER ou STANDBY/ON

n’est pas en position ON.

iLa fiche secteur est utilisée comme dispositif de

déconnexion et doit donc toujours rester disponible.

iDes précautions doivent être prises en cas d'utilisation

d'écouteurs ou d'un casque avec le produit car une pression

sonore excessive (volume trop fort) dans les écouteurs ou

dans le casque peut causer une perte auditive.

iSi vous rencontrez des problèmes avec ce produit,

contactez TEAC pour une assistance technique. N'utilisez

pas le produit tant qu'il n'a pas été réparé.

ATTENTION

iN'exposez pas cet appareil aux gouttes ni aux éclaboussures.

iNe placez pas d'objet rempli de liquide sur l'appareil,

comme par exemple un vase.

iN’installez pas cet appareil dans un espace confiné comme

une bibliothèque ou un meuble similaire.

iL’appareil doit être placé suffisamment près de la prise de

courant pour que vous puissiez à tout moment attraper

facilement la fiche du cordon d'alimentation.

iSi le produit utilise des piles/batteries (y compris un pack de

batteries ou des piles installées), elles ne doivent pas être

exposées au soleil, au feu ou à une chaleur excessive.

iPRÉCAUTION pour les produits qui utilisent des batteries

remplaçables au lithium: remplacer une batterie par

un modèle incorrect entraîne un risque d'explosion.

Remplacez-les uniquement par un type identique ou

équivalent.

PRÉCAUTIONS CONCERNANT LES PILES

Ce produit utilise des piles. Le mauvais usage des piles peut

provoquer une fuite, une rupture ou d'autres problèmes.

Respectez toujours les précautions suivantes pour l'emploi de

piles.

iNe rechargez jamais des piles non rechargeables. Les piles

peuvent se rompre ou fuir, risquant de causer un incendie

ou des blessures.

iLors de l’installation des piles, faites attention aux indications

de polarité (orientation plus/moins (¥/^) et installez-les

correctement dans le compartiment des piles comme

indiqué. Les installer à l’envers peut entraîner la rupture ou

la fuite des piles, source d’incendie, de blessure ou de dégât

autour d’elles.

iQuand vous rangez ou jetez des piles, isolez leurs bornes

avec de l'adhésif isolant ou avec un matériau équivalent

pour leur éviter d'entrer en contact avec d'autres piles ou

des objets métalliques.

iLorsque vous jetez les piles usagées, suivez les instructions

de mise au rebut indiquées sur les piles et les lois locales sur

l’enlèvement des ordures.

iN'utilisez pas d'autres piles que celles spécifiées. N'utilisez

pas en même temps des piles neuves et usagées, ni des

types de piles différents. Les piles peuvent se rompre ou fuir,

risquant de causer un incendie, des blessures ou des dégâts

autour d’elles.

iNe transportez pas et ne conservez pas des piles en même

temps que de petits objets métalliques. Les piles peut

entrer en court-circuit, provoquant une fuite, une rupture

ou d'autres problèmes.

iNe chauffez et ne démontez pas les piles. Ne les jetez pas

dans un feu ou dans de l’eau. Les piles peuvent se rompre

20 TASCAM DR-05

ou fuir, risquant de causer un incendie, des blessures ou des

dégâts autour d’elles.

iSi le liquide de la pile s’échappe, essuyez tout liquide

répandu dans le boîtier des piles avant d’insérer de nouvelles

piles. Si le liquide d’une pile touche un œil, il peut entraîner

une perte de la vue. Dans ce cas, rincez abondamment à

l’eau claire sans frotter l’œil et consultez immédiatement

un médecin. Si le liquide touche le corps ou les vêtements

d’une personne, il peut entraîner des blessures ou brûlures

cutanées. Si cela se produit, rincez abondamment à l’eau

claire puis consultez immédiatement un médecin.

iL’alimentation de l’unité doit être coupée quand vous

installez ou remplacez des piles.

iRetirez les piles si vous envisagez de ne pas utiliser l’unité

durant une période prolongée. Les piles peuvent se rompre

ou fuir, risquant de causer un incendie, des blessures ou

des dégâts autour d’elles. Si le liquide de la pile s’échappe,

essuyez tout liquide répandu dans le boîtier des piles avant

d’insérer de nouvelles piles.

iNe démontez pas une pile. L'acide qu'elle contient peut

entraîner des blessures cutanées ou des dommages aux

vêtements.

8Pour les consommateurs européens

Mise au rebut des équipements électriques

et électroniques

(a) Tout équipement électrique et électronique doit être

traité séparément de la collecte municipale d'ordures

ménagères dans des points de collecte désignés par le

gouvernement ou les autorités locales.

(b) En vous débarrassant correctement des équipements

électriques et électroniques, vous contribuerez à la

sauvegarde de précieuses ressources et à la prévention

de potentiels effets négatifs sur la santé humaine et

l'environnement.

(c) Le traitement incorrect des déchets d'équipements

électriques et électroniques peut avoir des effets graves

sur l'environnement et la santé humaine en raison

de la présence de substances dangereuses dans les

équipements.

(d) Le symbole de poubelle sur roues barrée

d'une croix indique que les équipements

électriques et électroniques doivent être

collectés et traités séparément des déchets

ménagers.

(e) Des systèmes de retour et de collecte sont

disponibles pour l'utilisateur final. Pour des informations

plus détaillées sur la mise au rebut des vieux équipements

électriques et électroniques, veuillez contacter votre

mairie, le service d'ordures ménagères ou le magasin dans

lequel vous avez acheté l'équipement.

Mise au rebut des piles et/ou accumulateurs

(a) Les piles et/ou accumulateurs hors d'usage doivent être

traités séparément de la collecte municipale d'ordures

ménagères dans des points de collecte désignés par le

gouvernement ou les autorités locales.

(b) En vous débarrassant correctement des piles et/ou

accumulateurs hors d'usage, vous contribuerez à la

sauvegarde de précieuses ressources et à la prévention

de potentiels effets négatifs sur la santé humaine et

l'environnement.

(c) Le traitement incorrect des piles et/ou accumulateurs

hors d'usage peut avoir des effets graves sur

l'environnement et la santé humaine en raison de la

présence de substances dangereuses.

(d) Le symbole de poubelle sur roues barrée

d'une croix indique que les piles et/ou

accumulateurs doivent être collectés et traités

séparément des déchets ménagers.

Si la pile ou l'accumulateur contient plus que

les valeurs spécifiées de plomb (Pb), mercure

(Hg) et/ou cadmium (Cd) telles que définies dans la

directive sur les piles (2006/66/CE), alors les symboles

chimiques de ces éléments seront indiqués sous le

symbole de poubelle sur roues barrée d'une croix.

(e) Des systèmes de retour et de collecte sont disponibles

pour l'utilisateur final. Pour des informations plus

détaillées sur la mise au rebut des piles et/ou

accumulateurs, veuillez contacter votre mairie, le service

d'ordures ménagères ou le magasin dans lequel vous les

avez achetés.

Pb, Hg, Cd

Страница загружается...

Tascam DR-05 Инструкция по применению

Похожие модели бренда

Модели других брендов