Yamaha V3 Руководство пользователя

Бренд: Yamaha

Модель: V3

Тип: Руководство пользователя

Это руководство также подходит для

Yamaha V3: ваш путь в мир качественного звука

С Yamaha V3 вы открываете для себя мир безупречного звучания. Оцените кристальную чистоту передачи и глубину басов, которые сделают прослушивание музыки, просмотр фильмов и игр еще более захватывающими. Устройство оснащено мощным усилителем, обеспечивающим впечатляющий объемный звук, а благодаря компактным размерам Yamaha V3 идеально впишется в любой интерьер. Подключайте смартфоны и планшеты по Bluetooth и наслаждайтесь любимыми треками в беспроводном режиме.

Yamaha V3: ваш путь в мир качественного звука

Rio3224-D / Rio1608-D Firmware Update Guide

Thank you for choosing a Yamaha product.

This guide explains how to update the Rio (Rio3224-D, and Rio1608-D) firmware and its built-in

Dante module firmware.

■ Precautions (Please be sure to read this section first!)

・ The user assumes full responsibility for the update.

・ Update the firmware components one unit at a time.

・ Please note that the device may be damaged if you fail to follow these instructions properly, or

turn off the device or disconnect the cable while the update is in progress.

・ If the update fails, and the device still does not operate correctly even after you execute the update

once again, please contact your Yamaha dealer.

・ Yamaha Corporation owns exclusive copyrights for the Rio firmware, its update program, and the

update guide.

・ Audinate owns exclusive copyrights for the Dante firmware and its update program.

・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety,

without permission from the copyright owner.

・ The screen shots in this guide are for use with this update procedure only and may be different

from the actual screen shots.

・ Dante is a registered trademark of Audinate.

・ Windows is a registered trademark of Microsoft ® Corporation in the United States and other

countries.

・ The company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

■ Checking the version number

・ You may check the Rio main firmware version number from the firmware update program (R

Series Update Program V2) or the Dante Controller of Audinate.

R Series Update Program V2 Dante Controller (Device View)

・ You may check the Dante firmware version number from the I/O DEVICE screen of CL series or

Dante Firmware Update Manager of Audinate.

CL (I/O DEVICE screen) Dante Controller (Device View)

■ Preparing for the update

You will need the following items ready to execute the update procedure.

● A Windows computer equipped with the following conditions:

Windows 8/8.1

/ Pro

Windows 7 Ultimate / Professional / Home Premium

CPU

Intel Pentium 1.2GHz or Intel Celeron 1.7GHz or higher

HDD 250MB or more

Connector

An Ethernet connector that supports a data transfer rate of 100Mbps or

higher

● An Ethernet cable (CAT5e or higher recommended. Straight or cross.)

● The Rio firmware

Download the latest firmware from the following URL.

http://www.yamahaproaudio.com/downloads/

● The Dante firmware update program

Download the latest program from the following URL.

http://www.yamahaproaudio.com/downloads/

■ Update procedure sequence

Update each firmware component in the following sequence.

To update more than one Rio unit, configure “Computer TCP/IP setting (for Rio unit)” and perform

“Rio unit firmware update” one by one. Then, configure “Computer TCP/IP setting (for Dante)” and

perform “Dante firmware update” one by one.

Install the Dante Firmware Update Manager

Computer TCP/IP setting (for Rio unit)

Updating the Rio firmware

Computer TCP/IP setting (for Dante)

Updating the Dante firmware

If there are 2 computers, you may use one for Rio unit firmware update and the other for Dante

firmware update so that you can perform the work without switching the TCP/IP settings. To update

more than one Rio firmware application, it is recommended to use 2 computers for the update.

■ Install the Dante Firmware Update Manager

Before you update the Dante firmware, you must install the Dante Firmware Update Manager.

Double-click the Dante Firmware Update Manager installer downloaded in “Preparing for the update”

(DanteFirmwareUpdateManager-x.x.x.exe) and follow the on-screen instructions to install the

firmware.

x.x.x represents the version number of the Dante Firmware Update Manager.

In addition, extract the Dante firmware (extension: .dnt) from the compressed file.

The Dante firmware will not work correctly if the path contains any characters other than single-byte

alphanumeric characters, "-" (hyphen), or "_" (underscore). You must save the firmware update file in

a directory whose name contains only single-byte alphanumeric characters, "-" (hyphen), or "_"

(underscore). (E.g., C:\temp)

・The “Windows Security” dialog box may appear. In such case, click [Install this driver software anyway].

・You may be prompted to restart the computer after the installation is complete. Before proceeding to update, restart

the computer.

・When installing the Dante Firmware Update Manager, temporarily disable any running anti-virus software.

■ Computer TCP/IP setting (for Rio unit)

To update Rio unit firmware, configure computer TCP/IP settings.

1. Open the Network and Sharing Center as described below.

Windows 7

Select [Start] → [Control Panel], then click or double-click [Network and Sharing Center] or [View network

status and tasks].

Windows 8 and Windows 8.1

[Windows]+[X] → [Control Panel], then click or double-click [Network and Sharing Center] or [View network

status and tasks].

The "Network and Sharing Center" is displayed.

2. Click [Manage network connection] or [Change Adapter settings] from the “Tasks” list located in the

left side of “Network and Sharing Center” window, then double-click [Local Area Connection].

The "Local Area Connection Status" dialog box will be displayed.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

・If the "Local Area Connection properties" dialog box appears, skip ahead to step 4.

3. Click [Properties].

The “Local Area Connection properties” dialog box will be displayed.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

4. Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties].

The "Internet Protocol Version 4(TCP/IPv4) Protocol" dialog box will be displayed.

5. Click [Use the following IP address].

6. Enter your computer's IP address "192.168.0.101" into [IP address], and "255.255.255.0" into [Subnet

mask].

・If you specify other values for the IP address, you will be unable to update Rio firmware.

7. Click [OK].

■ Updating the Rio firmware

This section explains how to update the Rio firmware.

Before you start updating the firmware, decompress the downloaded compressed file. Place

“RIO_PROG.bin,” “updatev2.exe” and “update.ini in the same folder.

For information about messages displayed by the Rio firmware update program, refer to “

Error Message List (R

Series Update Program V2)” at the end of this guide.

・ Before starting the update program, quit all other programs. While the update is in progress, do not start any

other programs or switch between windows.

・ If your computer enters Sleep or Energy Save mode, data transfer to the device may stop. Therefore, you should

disable these functions to prevent this from happening. We also recommend that you do not use any screen saver or

similar background programs.

1. Turn off the power to the Rio.

2. Take note of the dip switch settings on the Rio unit front panel.

Follow the procedure below to change dip switch settings. Take note of the original dip switch settings in order to

restore the settings when the Dante firmware update is completed.

3. Disconnect the Ethernet cable from the Dante [PRIMARY] connector and [SECONDARY] connector on

the rear panel of the Rio unit.

4. Pull the dip switch 4 on the Rio unit front panel down (ON) and turn the power on with the other

switches remaining in their up positions (OFF).

5. After the orange [SYNC] indicator flashes twice periodically on the front panel of the Rio unit, turn off

the power.

6. Connect the Dante [PRIMARY] connector on the rear panel of the Rio unit to the Ethernet connector

on the computer using an Ethernet cable.

7. Pull the dip switches 4 and 8 on the Rio unit front panel down (ON) and turn the power on with the

ther switches remaining in their up positions (OFF).

All the +48V indicators start flashing and the unit is activated in update mode.

8. Double-click [updatev2.exe].

The R Series Update Program V2 will start up.

Make sure that the fields in the "File" section indicate as follows:

file name

：

RIO_PROG.bin

product name

：

R-Series

Version

：

Version number to which the firmware will be updated

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

9. Click the [Connection] button in the “Connect and Update” column.

The “product name” field will display “R-Series,” and the “version” field will display the version number of the Rio

firmware.

・If these fields are empty, your computer may not be properly connected to the Rio. Please make sure that the

cable is not disconnected or damaged, that the TCP/IP settings are correct, and that the Rio has started in

Update mode.

10. Click the [Update] button in the “Connect and Update” column.

The update operation will begin.

The update will take about 30 seconds. During the update operation, do not turn off the power to the unit or

disconnect the cable. If update fails due to disconnection of the power cable during the update, or due to other

reasons, the device may become inoperative.

11. When the “Connect and Update” section displays the message “Update was completed. Close this

pdate Program.” click the [X] button in the upper-right corner of the program window to close the

rogram.

12. Turn off the power to Rio.

■ Computer TCP/IP setting (for Dante)

To update Dante firmware, configure computer TCP/IP settings.

1. Open the Network and Sharing Center as described below.

Windows 7

Select [Start] → [Control Panel], then click or double-click [Network and Sharing Center] or [View network

status and tasks].

Windows 8 and Windows 8.1

[Windows]+[X] → [Control Panel], then click or double-click [Network and Sharing Center] or [View network

status and tasks].

The “Network and Sharing Center” is displayed.

2. Click [Manage network connection] or [Change Adapter settings] from the “Tasks” list located in the

left side of “Network and Sharing Center” window, then double-click [Local Area Connection].

The "Local Area Connection Status" dialog box will be displayed.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

・If the "Local Area Connection properties" dialog box appears, skip ahead to step 4.

3. Click [Properties].

The “Local Area Connection properties” dialog box will be displayed.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

4. Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties].

The "Internet Protocol Version 4(TCP/IPv4) Protocol" dialog box will be displayed.

5. Click [Obtain an IP address automatically].

6. Click [OK].

■ Updating the Dante firmware

Described below are the procedures to update the Dante module firmware integrated in the Rio unit.

・For details of the Dante Firmware Update Manager, refer to “AUD-MAN-Firmware Update Manager" stored in the

compressed file folder.

1. Connect the Dante [PRIMARY] connector on the rear panel of the Rio unit to the Ethernet connector

on the computer using an Ethernet cable.

Be sure to directly connect the computer and the Rio unit, and do not connect any other Dante device

to the computer.

2. Pull the dip switches 4 and 8 on the Rio unit front panel down (ON) with the other switches remaining

in their up positions (OFF).

3. Turn on the power to the Rio.

4. Select [Start]→[All programs]→[Audinate]→[Dante Firmware Update Manager]→[Dante Firmware

Update Manager ] , then right-click and select “Run as Administrator.”

The Dante Firmware Update Manager will start up.

Check that the version number is 1.3.2 or higher from the title bar.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

5. If you see the interface selection screen, select the interface card to connect the Dante device.

6. Click [Update Dante Firmware].

7. Click [Browse] and select “FWUpdate_Rio3224D-vxxx-swyyy.dnt” in case of Rio3224-D or

“

FWUpdate_Rio1608D-vxxx-swyyy.dnt” in case of Rio1608-D. Then click [Open].

xxx and yyy represent the firmware version number.

・The Dante firmware will not work correctly if the path contains any characters other than single-byte

alphanumeric characters, "-" (hyphen), or "_" (underscore). You must save the firmware update file in a

directory whose name contains only single-byte alphanumeric characters, "-" (hyphen), or "_" (underscore). (E.g.,

C:\temp)

e sure to ensure compatibility of the update files with Rio. If update files other than Rio are applied, the

evice will become inoperable. In general, do not check the [Override Device Matching] option. If this option is

left unchecked, only devices that support the file can be selected, ensuring that updating the device with invalid

or wrong files is prevented.

8. Click [Next].

・In some cases the Windows firewall may be blocking the Dante Firmware Update Manager. Select the [Private

network] check box, and click [Allow access]. Alternatively, in the Windows firewall, click "Allow programs or

functions through the Windows firewall," and if the "fum" checkbox is unselected, select this check box to allow

access.

If the update manager is blocked by the Windows firewall, the "Upgrade Failed" dialog box appears.

9. Check the Rio to update.

Check the version of the update files and the version number indicated in the Rio line.

・ If the Rio is not indicated, click [Refresh]. If it is still not indicated, use Dante Controller to check whether the

cable might be disconnected or broken, whether the TCP/IP settings are correct, and whether the Rio is running.

10. Click [Start].

The update operation will begin.

“Updating(n/m)” appears in the Status field during updating. “Done” is displayed once update is completed.

Update takes 2 to 4 minutes. During the update operation, do not turn off the power to the unit or disconnect the

cable. If update fails due to disconnection of the power cable during the update, or due to other reasons, the device

may become inoperative.

・If update is not completed after 5 minutes, or update failure indication appears, click X at the upper right corner

of Dante Firmware Update Manager to exit the program without turning the Rio power off, and restart the

procedure from the step 4. If update still fails, follow the instructions stated in “About Failsafe Mode” to perform

the recovery process.

11. Turn off the power to the Rio and return the dip switches to their original settings.

Please return the dip switch settings to the positions noted in step 2 of the "Updating the Rio firmware."

The firmware update is now complete.

■About Failsafe Mode

The Dante module integrated in the Rio may become unusable due to data corruption if the Dante

device is powered-off during a firmware update.

To recover from such a state, the Dante module will enter "failsafe mode."

To restore the Dante module from failsafe mode, a recovery image must be sent from the Firmware

Update Manager.

If the red [SYSTEM] indicator of the Rio unit periodically blinks twice, it may be that the Dante

module is in failsafe mode.

Use Dante Controller to check whether the Dante module is in failsafe mode.

A Dante module that is in failsafe mode is shown as a red device name in the network grid view of

Dante Controller (version 3.1.x or later).

Described below are the procedures to recover the Dante module integrated in the Rio unit.

1. Turn off the power to the Rio.

2. Separate the Rio from the Dante network.

3. Connect the Dante [PRIMARY] connector on the rear panel of the Rio unit to the Ethernet connector on

the computer using an Ethernet cable.

In some cases, an error may occur during recovery if you are going through a network switch. Connect the

computer with the Rio in a one-to-one connection.

4. Turn on the power to the Rio.

5. Disable all but one of the network interfaces on your computer.

You should also disable the wireless LAN.

6. Select [Start]→[All programs]→[Audinate]→[Dante Firmware Update Manager]→[Dante Firmware

Update Manager ] , then right-click and select “Run as Administrator.”

The Dante Firmware Update Manager will start up.

・The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

7. If you see the interface selection screen, select the interface card to connect the Dante device.

8. Click [Failsafe Recovery].

9. When the Rio is detected, click the [Stop Scan] button.

If several minutes have passed without detection, use Dante Controller to check whether the cable might be

disconnected or broken, whether the TCP/IP settings are correct, and whether the Rio is running.

10. Select the check box of the detected Rio.

11. Click [Start].

A pop-up is displayed confirming that you wish to proceed.

12. Click [OK] to start the recovery.

Firmware Update Manager will display "Processing Safe Recovery", and then "Safe recovery Done" when the

device(s) are recovered.

13. Exit the Dante Firmware Update Manager, and wait for two minutes before turning off the power to

the Rio unit.

After recovery, restart the Dante module. If you power-off the Rio before restart is completed, the data of the

Dante module will be corrupted, and you will have to perform the recovery once again. Start Dante Controller, and

if the device name is shown in black, it is safe to turn off the power.

14. The correct Dante firmware now needs to be loaded.

After recovery, the Dante firmware will not be the latest version. To update to the latest firmware, perform steps 2

through 11 of "Updating the Dante firmware."

Now recovery and firmware update are completed.

■ Error Message List(R Series Update Program V2)

Error messages (that consist of an error number and a string in English) for the R Series Update

Program V2 may be displayed on the computer.

This section explains the error numbers, the English strings, and the appropriate action to take.

・ If the same error message appears each time you try to update, the device may need repairing, in which case you

should contact your Yamaha dealer.

Number Cause Possible Solution

[ERROR:001]～[ERROR:006]

、

[ERROR:101]～[ERROR:107]

An error occurred while communicating with

the device.

Make sure that the computer is

connected to the Rio correctly, then

restart the R Series Update Program

V2 and the Rio unit.

(

→ P. 7 )

[ERROR:009] The Rio is not engaged in Update mode. After turning the Rio power off, pull

the dip switches 4 and 8 down (ON)

and put all other switches (OFF) and

then turn the power on. (→ P. 7 )

[ERROR:108]、[ERROR:109]

Information on the Rio could not be obtained. The device may need repairing, in

which case you should contact your

Yamaha dealer.

[ERROR:111] The firmware data file was not found. Place the “RIO_PROG.bin” file in the

folder that contains the

“updatev2.exe” file.(→ P. 7 )

Manual Development Department

Yamaha V3 Руководство пользователя

Бренд: Yamaha

Модель: V3

Тип: Руководство пользователя

Это руководство также подходит для

Yamaha V3: ваш путь в мир качественного звука

Скачать PDF

сообщить о нарушении

на других языках

English: Yamaha V3 User guide
français: Yamaha V3 Mode d'emploi
italiano: Yamaha V3 Guida utente
español: Yamaha V3 Guía del usuario
Deutsch: Yamaha V3 Benutzerhandbuch
Nederlands: Yamaha V3 Gebruikershandleiding
português: Yamaha V3 Guia de usuario
dansk: Yamaha V3 Brugervejledning
polski: Yamaha V3 instrukcja
čeština: Yamaha V3 Uživatelská příručka
svenska: Yamaha V3 Användarguide
Türkçe: Yamaha V3 Kullanici rehberi
suomi: Yamaha V3 Käyttöohjeet
română: Yamaha V3 Manualul utilizatorului

Yamaha V3 Руководство пользователя

Это руководство также подходит для

Yamaha V3 Руководство пользователя

на других языках

Похожие модели бренда