Samsung RZ28H6150SP Инструкция по применению

  • Здравствуйте! Я — чат-бот, прочитавший руководство пользователя по морозильной камере Samsung. Я могу ответить на ваши вопросы о её установке, эксплуатации, функциях, таких как регулировка температуры и быстрая заморозка, а также помочь в устранении неполадок. Задавайте ваши вопросы!
  • Как установить нужную температуру в морозильной камере?
    Что делает функция Power Freeze?
    Как работает сигнализация об открытой дверце?
    Как снять внутренние полки и контейнеры для чистки?
Freezer
user manual
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive more complete service, please visit
www.samsung.com
Free Standing Appliance
This manual is made with 100% recycled paper.
DA68-03009N-02.indb 1DA68-03009N-02.indb 1 15. 1. 6.  8:4415. 1. 6.  8:44
English - 2
SAFETY INFORMATION
Before operating the
appliance, please read this
manual thoroughly and retain
it for your reference.
Use this appliance only for
its intended purpose as
described in this instruction
manual. This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
Because these following
operating instructions
cover various models, the
characteristics of your freezer
may differ slightly from those
described in this manual.
Safety information
Contents
SAFETY INFORMATION ………………………………………………………………………………2
SETTING UP YOUR FREEZER …………………………………………………………………… 11
OPERATING YOUR FREEZER …………………………………………………………………… 17
TROUBLESHOOTING ……………………………………………………………………………… 22
DA68-03009N-02.indb 2DA68-03009N-02.indb 2 15. 1. 6.  8:4415. 1. 6.  8:44
English - 3
SAFETY INFORMATION
Important safety symbols and
precautions:
WARNING
Hazards or unsafe
practices that may result
in severe personal injury
or death.
CAUTION
Hazards or unsafe
practices that may result
in minor personal injury
or property damage.
OTHER SYMBOLS USED
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions carefully.
Unplug the power plug from
the wall socket.
Make sure the machine is
grounded to prevent electric
shock.
Call the contact center for
help.
Note.
These warning signs are here
to prevent injury to you and
others.
Please follow them explicitly.
After reading this section, keep
it in a safe place for future
reference.
CE Notice
This product has been determined
to be in compliance with the Low
Voltage Directive (2006/95/EC),
the Electromagnetic Compatibility
Directive (2004/108/EC),
RoHS Directive (2011/65/EU),
Commission Delegated Regulation
(EU) No 1060/2010 and the Eco-
Design Directive(2009/125/EC)
implemented by Regulation (EC)
No 643/2009 of the European
Union. (For products sold in
European Countries only)
DA68-03009N-02.indb 3DA68-03009N-02.indb 3 15. 1. 6.  8:4415. 1. 6.  8:44
English - 4
SEVERE WARNING
SIGNS FOR
INSTALLATION
Do not install the freezer
in a damp place or place
where it may come in
contact with water.
- Deteriorated insulation of
electrical parts may cause an
electric shock or fire.
Do not place this freezer in
direct sunlight or expose to
the heat from stoves, room
heaters or other appliance.
Never use gas pipes,
telephone lines or other
potential lightening rods as
ground.
- Improper use of the ground
plug can result in electric
shock.
Do not plug several appliances
into the same multiple power
board. The freezer should
always be plugged into its
own individual electrical which
has a voltage rating that
matched the rating plate.
- This provides the best
performance and also
prevents overloading house
wiring circuits, which could
cause a fire hazard from
overheated wires.
Do not use a cord that shows
WARNING
cracks or abrasion damage
along its length or at either
end.
Do not bend the power cord
excessively or place heavy
articles on it.
This freezer must be
properly installed and
located in accordance
with the manual before it
is used.
If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric
shock of fire.
Connect the power plug in
proper position with the cord
hanging down.
- If you connect the power plug
upside down, wire can get cut
off and cause fire or electric
shock.
When moving the freezer,
be careful not to roll over or
damage the power cord.
- This constitutes a fire hazard.
Make sure that the power plug
is not squashed or damaged
by the back of the freezer.
Keep the packing materials
out of reach of children.
- There is a risk of death from
suffocation if children put them
on their head.
DA68-03009N-02.indb 4DA68-03009N-02.indb 4 15. 1. 6.  8:4415. 1. 6.  8:44
English - 5
SAFETY INFORMATION
The appliance must be
positioned so that the plug is
accessible after installation.
The freezer must be
grounded.
- You must ground the freezer
to prevent any power leakages
or electric shocks caused
by current leakage from the
freezer.
If the power cord is
damaged, have it
replaced immediately by
the manufacturer or its
service agent.
The fuse on refrigerator
must be changed by a
qualified technician or service
company.
- Failing to do so may result
in electric shock or personal
injury.
CAUTION SIGNS FOR
INSTALLATION
• Keep ventilation
opening in the appliance
enclosure or mounting
structure clear of
obstruction.
Allow the appliance to stand
for 2 hours after installation.
SEVERE WARNING
SIGNS FOR USING
Do not insert the power
plug with wet hands.
Do not store articles on the
top of the appliance.
- When you open or close the
door, the articles may fall and
cause personal injury and/or
material damage.
Do not put a container filled
with water on the freezer.
- If spilled, there is a risk of fire
or electric shock.
Do not let children hang on
the door. If not, a serious injury
may occur.
Do not let children enter inside
of the freezer. There is a risk of
children entrapment.
Do not touch the inside walls
of the freezer or products
CAUTION
WARNING
DA68-03009N-02.indb 5DA68-03009N-02.indb 5 15. 1. 6.  8:4415. 1. 6.  8:44
English - 6
stored in the freezer with wet
hands.
- This may cause frostbite.
Do not store volatile or
flammable substances in the
freezer.
- The storage of benzene,
thinner, alcohol, ether, LP gas
and other such products may
cause explosions.
Do not store pharmaceuticals
products, scientific materials
or temperature sensitive
products in the freezer.
- Products that require strict
temperature controls must not
be stored in the freezer.
Do not place or use electrical
appliance inside the freezer,
unless they are of a type
recommended by the
manufacturer.
Do not use mechanical
devices or any other
means to accelerate
the defrosting process,
other than those
recommended by the
manufacturer.
Do not damage the
refrigerant circuit.
Do not disassemble or repair
the freezer by yourself.
- You run risk of causing a fire,
malfunction and/or personal
injury.
Children should be
supervised to ensure that
they do not play with the
appliance.
This product is intended only
for the storage of food in a
domestic environment.
If a gas leak is detected, avoid
any naked flames or potential
sources of ignition and air the
room in which the appliance is
standing for several minutes.
Use only the LED Lamps
provided by manufacturer or
service agents.
If you smell
pharmaceutical or
smoke, pull out power
plug immediately and
contact your Samsung
Electronics service
center.
If the products equipped
with LED Lamp, do not
disassemble Lamp Cover and
LED Lamp by yourself.
- Please contact your service
agents.
DA68-03009N-02.indb 6DA68-03009N-02.indb 6 15. 1. 6.  8:4415. 1. 6.  8:44
English - 7
SAFETY INFORMATION
CAUTION SIGNS FOR
USING
Do not place carbonated
or fizzy drinks in the
freezer compartment. Do
not put bottles or glass
containers in the freezer.
- When the contents freeze, the
glass may break and cause
personal injury.
To get Best performance
of product,
- Do not place foods too closely
in front of the vents at the
rear of the appliance as it can
obstruct free air circulation in
the freezer compartment.
- Wrap the food up properly or
place it in airtight containers
before put it into the freezer.
- Do not put any newly
introduced food for freezing
near to already food.
Please observe maximum
storage times and expiry
dates of frozen goods.
There is no need to disconnect
the freezer from the power
supply if you will be away for
less than three weeks. But,
Remove all the food if you
are going away for the three
weeks or more. Unplug the
freezer and clean it, rinse and
CAUTION
dry.
Fill water tank, ice tray, water
cubes only with potable water.
If the freezer is damaged
by water, pull out
the power plug and
contact your Samsung
Electronics service
center.
Do not apply strong shock
or excessive force onto the
surface of glass.
- Broken glass may result in a
personal injury and/or property
damage.
CAUTION SIGNS FOR
CLEANING
Do not directly spray
water inside or outside
the freezer.
- There is a risk of fire or electric
shock.
Do not spray inflammable gas
near the freezer.
- There is a risk of explosion or
fire.
Remove any foreign
matter or dust from the
power plug pins. But do
not use a wet or damp
cloth when cleaning the
CAUTION
DA68-03009N-02.indb 7DA68-03009N-02.indb 7 15. 1. 6.  8:4415. 1. 6.  8:44
English - 8
plug, remove any foreign
material or dust from the
power plug pins.
- Otherwise there is a risk of fire
or electric shock.
Do not spray cleaning
products directly on the
display.
- Printed letters on the display
may come off.
Unplug the freezer before
cleaning and making
repairs.
SEVERE WARNING
SIGNS FOR DISPOSAL
When disposing of
this or other freezers,
remove the door/door
seals, door latch so that
small children or animals
cannot become trapped
inside. Children should
be supervised to ensure
that they do not play with
the appliance.
Please dispose of the
packaging material for this
product in an environmentally
friendly manner.
Leave the shelves in place so
that children may not easily
WARNING
climb inside. Ensure that none
of the pipes on the back of the
appliance are damaged prior
to disposal.
R-600a or R-134a is used
as a refrigerant. Check the
compressor label on the rear
of the appliance or the rating
label inside the freezer to
see which refrigerant is used
for your freezer. When this
product contains flammable
gas (Refrigerant R-600a),
contact your local authority
in regard to safe disposal of
this product. Cyclopentane is
used as a insulation blowing
gas. The gases in insulation
material require special
disposal procedure. Please
contact your local authorities in
regard to the environmentally
safe disposal of this product.
Ensure that none of the pipes
on the back of the appliances
are damaged prior to disposal.
The pipes shall be broke in the
open space.
If the appliance contains
iso-butane refrigerant
(R-600a), a natural gas
with high environmental
compatibility that is, however,
also combustible. When
transporting and installing the
appliance, care should be
DA68-03009N-02.indb 8DA68-03009N-02.indb 8 15. 1. 6.  8:4415. 1. 6.  8:44
English - 9
SAFETY INFORMATION
taken to ensure that no parts
of the refrigerating circuit are
damaged.
Refrigerant squirting out of the
pipes could ignite or cause an
eye injury. If a leak is detected,
avoid any naked flames or
potential sources of ignition
and air the room in which
the appliance is standing for
several minutes.
In order to avoid the creation
of a flammable gas-air mixture
if a leak in the refrigerating
circuit occurs, the size of the
room in which the appliance
may be sited depends on the
amount of refrigerant used.
Never start up an appliance
showing any signs of damage.
If in doubt, consult your dealer.
The room must be 1m³
in size for every 8g of
R-600a refrigerant inside the
appliance. The amount of
refrigerant in your particular
appliance is shown on the
identification plate inside the
appliance.
ADDITIONAL TIPS
FOR PROPER USAGE
In the event of a power failure,
call the local office of your
Electricity Company and ask
how long it is going to last.
- Most power failures that are
corrected in an hour or two
will not affect your freezer
temperatures. However, you
should minimize the number
of door openings while the
power is off.
- But Should the power failure
last more than 24 hours,
remove all frozen food.
If the key is provided with
freezer, the keys should
be kept out of the reach of
children and not in vicinity of
the appliance.
The appliance might
not operate consistently
(possibility of defrosting of
contents or temperature
becoming too warm in the
freezer) when sited for an
extended period of time below
the cold end of the range
of temperatures for which
the refrigerating appliance is
designed.
Your appliance is frost free,
which means there is no
need to manually defrost
DA68-03009N-02.indb 9DA68-03009N-02.indb 9 15. 1. 6.  8:4415. 1. 6.  8:44
English - 10
your appliance, as this will be
carried out automatically.
Temperature rising during the
defrost can comply with ISO
requirement. But If you want
to prevent an undue rise in the
temperature of the frozen food
while defrosting the appliance,
please wrap the frozen food in
several layers of newspaper.
Any increase in temperature of
frozen food during defrosting
can shorten its storage life.
The temperature of two
star section (sections) or
compartment (compartments)
which have two star symbol
(
) is slightly higher than
other freezer compartment
(compartments).
The two star section
(sections) or compartment
(compartments) is (are) based
on the instruction and/or the
condition as delivered.
Saving Energy Tips
- Install the appliance in a
cool, dry room with adequate
ventilation.
Ensure that it is not exposed
to direct sunlight and never
put it near a direct source of
heat (radiator, for example).
- Never block any vents or
grilles on the appliance.
- Allow warm food to cool down
before placing it in the appliance.
- Put frozen food in the
refrigerator to thaw.
You can then use the low
temperatures of the frozen
products to cool food in the
refrigerator.
- Do not keep the door of the
appliance open for too long
when putting food in or taking
food out. The shorter time for
which the door is open, the
less ice will form in the freezer.
- Clean the rear of the
refrigerator regularly.
Dust
increases energy consumption.
- Do not set temperature colder
than necessary.
- Ensure sufficient air exhaust at
the refrigerator base and at the
back wall of the refrigerator.
Do not cover air vent openings.
- Allow clearance to the right, left,
back and top when installing.
This will help reduce power
consumption and keep your
energy bills lower.
- For the most efficient use
of energy, please keep the
all inner fittings such as
baskets, drawers, shelves
on the position supplied by
manufacturer.
DA68-03009N-02.indb 10DA68-03009N-02.indb 10 15. 1. 6.  8:4415. 1. 6.  8:44
English - 11
SETTING UP
GETTING READY TO INSTALL
THE FREEZER
Congratulations on your purchase of this Samsung
Freezer.
We hope you enjoy the state-of-art features and
efficiencies that this new appliance offers.
This freezer must be properly installed and
located in accordance with the manual before it
is used.
Use this appliance only for its intended purpose
as described in this instruction manual.
We strongly recommend that any servicing be
performed by a qualified individual.
Please dispose of the packaging material for this
product in an environmentally friendly manner.
Pull the power plug out of the socket before
changing the interior light of the freezer.
- Otherwise, there is a risk of electric shock.
Selecting the best location for the
Freezer
A location without direct exposure to sunlight.
A location with flat floor surface.
A location with enough space for the freezer door
to open easily.
Allow sufficient space for air circulation of the
internal cooling system. If the freezer does not
have enough space, the internal cooling system
may perform more.
100mm
100mm
50mm
50mm
1800mm
1800mm
WARNING
595mm
595mm
568mm
568mm
at least
at least
50mm
50mm
1183mm
1183mm
912.5mm
912.5mm
121
121
°
°
Height of the product may be different
depending on the models.
Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
Do not install the freezer in a place with the
temperature lower than 10°C.
Pull the unit straight out when installing,
servicing or cleaning behind the freezer and
push it straight back after work is complete.
Make sure your floor can support fully loaded
freezer.
Remove paper on spacer and then attach
two spacers (Gray block) on the back side of
refrigerator for better performance.
Make sure two spacers fix like below image
when you install the refrigerator.
It is improving the refrigerator performance.
Spacer
Spacer
CAUTION
Setting up your freezer
DA68-03009N-02.indb 11DA68-03009N-02.indb 11 15. 1. 6.  8:4415. 1. 6.  8:44
English - 12
REVERSING THE FREEZER
DOOR
Samsung recommends that reversing of the
door opening is only completed by Samsung
approved Service providers. This will be on
a chargeable basis and at the customers
expense.
Any damage caused while attempting to
reverse the door opening is not covered
under the appliance manufactures warranty.
Any repairs requested due to this
circumstance will be completed on a
chargeable basis at the customers expense.
Required Tools (Not provided)
Phillips Head
Driver (+)
Flat Head
Driver (-)
10mm
Socket Wrench
(for bolts)
8mm
Socket Wrench
(for bolts)
Spanner
(for hinge shaft)
5mm Hex
Wrench
(for bottom
hinge shaft)
WARNING
1. Remove 4 screws on the top of the freezer.
2. Remove the plastic cover and make sure to
disconnect the wire connected to it.
After removing the plastic cover, check the parts
for reversing the door.
Be careful not to damage the electrical wires
when removing the plastic cover.
3. Disconnect the wires and then remove 3 bolts.
Make sure your freezer is unplugged before
handling electrical wires.
CAUTION
WARNING
DA68-03009N-02.indb 12DA68-03009N-02.indb 12 15. 1. 6.  8:4415. 1. 6.  8:44
English - 13
SETTING UP
7. Separate the hinge shaft by using hex wrench
first. Unscrew the bolt to remove the hinge riser
and switch the side of the hinge shaft and the
hinge riser.
Hinge shaft
Hinge riser
8mm Bolt
8. Attach the hinge on the bottom right side of the
freezer where bolts were previously removed in
step 6. Screw the bolts that were removed on
the bottom left side of the freezer for the future
usage. Switch the the Leg from the left to right.
10mm
10mm
10mm
10mm
9. Remove the screws on the bottom right and left
side of the freezer door. Switch the side of the
door stopper from left to the right. Hinge riser
should be switched as well.
Hinge riser
Hinge riser
Hinge riser
Hinge riser
4. Remove the door from the lower hinge by
carefully lifting the door straight up.
Freezer door is heavy, be careful not to injure
yourself when removing the freezer door.
5. Separate the front leg cover after removing 2
screws.
Screws
Screws
6. Unscrew 3 bolts tightening the hinge and also
unscrew 3 bolts on the bottom right side by the
front leg where removed hinge will be attached.
10mm
10mm
10mm
10mm
CAUTION
DA68-03009N-02.indb 13DA68-03009N-02.indb 13 15. 1. 6.  8:4415. 1. 6.  8:44
English - 14
13. Reassemble the hinge on the freezer door by
reversing the step 11. Make sure to use right side
hinge cover (which can be found underneath the
removed plastic cover from step 2) and remove
the grommet. After reassembling the hinge, wire
and the hinge cover, switch the side from left to
the right.
Grommet
Grommet
14. After switching the hinge, make sure to take out
Cover Wire Door R in the packing and close it
with the wire cover on the top of freezer door.
“Cover Wire Door R” can
be found in the packaging
15. Take off the handle cover and remove the screws,
make sure to detach the caps and the handle
from the right to left side of the door. (Make sure
to cover the right side with detached caps.)
Handles may not have cover depending on
the models.
10. Remove the wire cover on top of the freezer door
to switch the side of the wires.
11. Remove the hinge and the grommet from the
freezer door. Detach the left side hinge cover and
pull the wires out of the hinge cover.
Hinge cover
Hinge cover
Grommet
Grommet
Be careful not to damage the electrical wires
when removing the hinge cover.
12. Use wrench to separate the hinge shaft and then
flip the hinge and reattach the hinge shaft.
And remove the shim at the top and attach it to
the other side.
CAUTION
DA68-03009N-02.indb 14DA68-03009N-02.indb 14 15. 1. 6.  8:4415. 1. 6.  8:44
English - 15
SETTING UP
19. Tighten 4 screws back to its place.
20. Detach the Freezer door gaskets and then attach
them after rotating them 180˚.
• After reversing the doors, make sure
the Freezer door gaskets are properly
arranged. If not, there might be a noise or
dew formed which affects performance of
the refrigerator.
WARNING
16. Switch the hinge cap and attach the front leg
cover. Carefully put the freezer door back on.
Hinge cap
Hinge cap
17. Tighten the 3 bolts and then connect the wires
back together.
Make sure your freezer is unplugged before
handling electrical wires.
18. Connect the wire on the plastic cover and put the
cover back to its original position.
WARNING
DA68-03009N-02.indb 15DA68-03009N-02.indb 15 15. 1. 6.  8:4415. 1. 6.  8:44
English - 16
LEVELLING THE FREEZER
If the front of the appliance is
slightly higher than the rear, the
door can be opened and closed
more easily.
Turn the adjusting legs clockwise
to raise and counter-clockwise
to lower the height.
Case 1) The appliance tilts
down to the left.
Turn the left adjusting leg in
the direction of the arrow until
the appliance is level.
Case 1)
Case 1)
Case 2)
Case 2)
Case 2) The appliance tilts
down to the right.
Turn the right adjusting leg in
the direction of the arrow until
the appliance is level.
DA68-03009N-02.indb 16DA68-03009N-02.indb 16 15. 1. 6.  8:4515. 1. 6.  8:45
English - 17
OPERATING
USING THE CONTROL PANEL
(1) Freezer
Press the Freezer button to set the desired
temperature from the range between
-15°C and -23°C.
Default set temperature is set on -19°C
and each time you press the Freezer
button temperature will change in following
order and temperature indicator will display
the desired temperature.
When the temperature setting is done,
temperature indicator will display the
current temperature of the freezer.
(2) Power Freeze
Press the Power Freeze button to activate
the Power Freeze function. Power Freeze
indicator will light up and the freezer will
speed up the time to needed to freeze
products in the freezer.
When you use this function, the energy
consumption will increase. This function
must be activated before putting large
amount of food stuff in the freezer
compartment at least 20 hours before.
To deactivate the Power Freeze function,
press the Power Freeze button again.
CHECKING THE CONTROL
PANEL
(1)
(1)
(2)
(2)
(3)
(3)
(4)
(4)
Each time you press the button, a short beep
will sound.
Operating your freezer
DA68-03009N-02.indb 17DA68-03009N-02.indb 17 15. 1. 6.  8:4515. 1. 6.  8:45
English - 18
(4) Control Lock (3 sec)
Press the Control Lock button for 3
seconds to activate the Lock function.
Lock indicator will light up and all the
buttons on the control panel will be locked.
To deactivate the Lock function, press the
Control Lock button again for 3 seconds.
Some of the features can be different and
may not be available depending on the
model.
(3) Door Alarm
1. Door Alarm
Press the Door Alarm button to activate
the Alarm function.
Alarm indicator will light up and the
refrigerator will alert you with alarm sound
if the freezer door is kept open for longer
than 2 minutes. To deactivate the Alarm
function, press the Door Alarm button
again.
2. Temperature Alarm
Press the Door Alarm button to activate
the temperature alarm function. The
alarm indicator will light up. If the freezer
compartment is too warm because there
has been a power failure, the signal of “--”
flashes on the display.
When the Freezer button is pressed, the
“warmest temperature” which has reached
in the freezer compartment is flashed on
the display for five seconds. Then the
actual temperature is indicated.
To deactivate the Temperature Alarm
function, press the Door Alarm button
again.
This warning may operate;
- when the appliance is turned on
- the freezer compartment is too warm
due to a power failure
3. Display Off
As standard, the temperature display is
switched off, to switch between on and
off mode, press Door Alarm button for 3
seconds.
DA68-03009N-02.indb 18DA68-03009N-02.indb 18 15. 1. 6.  8:4515. 1. 6.  8:45
English - 19
OPERATING
(5) SOFT FROST DOOR GUARD
Can be used for small packages of frozen food.
Position of the Twist ice maker (2) can be
switched with each other.
To get more space, you can remove cover of Top
shelf (1), Twist ice maker (2), and top four of
the Big boxes (3). It does not affect thermal and
mechanical characteristics. A declared storage
volume of freezer compartment is calculated with
these parts removed.
Do not store glass bottles in the freezer.
CAUTION
(1) TOP SHELF
Top shelf was equipped with flip type plastic
cover to easily get or store foods.
(2) TWIST ICE MAKER (OPTIONAL)
You can make ice and store them in the ice bin
underneath the twist ice maker.
(3) BIG BOX
Best used to store meats or dry foods.
Stored food should be wrapped securely with foil
or other suitable wrapping material or containers.
(4) TEMPERED GLASS SHELF
Holds the big boxes but it can be used as
ordinary shelves to put the foods on it.
(1)
(1)
(2)
(2)
(3)
(3)
(5)
(5)
(4)
(4)
DA68-03009N-02.indb 19DA68-03009N-02.indb 19 15. 1. 6.  8:4515. 1. 6.  8:45
English - 20
REMOVING THE INTERIOR
PARTS
Some of the features can be different and
may not be available depending on the
model.
Top shelf cover
1. Push the right side of cover inward until you can
get the projection on the left side out.
2. When both sides of the projections are out of the
grooves, pull it towards you to remove the cover.
Make sure that you remove the top shelf
cover when you assemble or disassemble
the glass shelf.
Twist ice maker (Optional)
Slightly lift up the twist ice maker and pull it towards
you.
Boxes
Pull the boxes out fully then slightly lift it up to
remove the boxes. (Small box/Fresher box/Big box)
MAKING ICE
Ice tray may look different depending on
models.
Making ice cubes
1. Remove the ice cube tray by pulling it towards
you.
2. Fill the tray with water up to the maximum water
level marked on the tray.
3. Slide the tray back into the holder, taking care not
to spill the water.
4. Wait until the ice cubes are formed.
water level
water level
Freezing time
It is recommended that you wait for about
one hour with the temperature set to Power
Freeze for the ice cubes to form.
Removing the ice cubes
1. Make sure that the ice bin is in place under the
ice tray. If not, slide it into place.
2. Twist the handle of ice tray firmly in the clockwise
direction until the tray twists slightly. The ice
cubes fall into the storage bin.
3. To get ice, slightly lift up the ice tray and pull it
towards you.
DA68-03009N-02.indb 20DA68-03009N-02.indb 20 15. 1. 6.  8:4515. 1. 6.  8:45
/