Sony CDX-GT500EE Инструкция по применению

Бренд: Sony

Модель: CDX-GT500EE

Категория: Мультимедиа-приемники для автомобилей

Тип: Инструкция по применению

2-663-186-42 (1)

Operating Instructions

Инструкция по эксплуатации

CDX-GT500EE

To cancel the demonstration (DEMO) display, see page 10.

Для отмены демонстрации на дисплее (режим DEMO) см. стр. 11

Compact Disc Player

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy your drive with the

following functions.

• CD playback

You can play CD-DA (also containing CD

TEXT*), CD-R/CD-RW (MP3/WMA files also

containing Multi Session (page 12)) and

ATRAC CD (ATRAC3 and ATRAC3plus

format (page 13)).

• Radio reception

– You can store up to 6 stations per band (FM1,

FM2, FM3, AM1 and AM2).

– BTM (Best Tuning Memory): the unit selects

strong signal stations and stores them.

• Sound adjustment

– EQ3 parametric: You can choose any one

of 7 preset equalizer curves, and adjust as

desired.

– DSO (Dynamic Soundstage Organizer):

creates a more ambient sound field, using

virtual speaker synthesis, to enhance the

sound of speakers, even if they are installed

low in the door.

– BBE MP: improves digitally compressed

sound such as MP3.

• Image setting

You can set various display images on the unit.

– Space Producer: creates animated on-screen

patterns in time with the music.

• Optional unit operation

You can also control optional CD/MD changers

and optional Sony portable devices in addition

to playing with this unit.

* A CD TEXT disc is a CD-DA that includes

information such as disc, artist and track name.

SonicStage and its logo are trademarks of Sony

Corporation.

ATRAC, ATRAC3, ATRAC3plus and their logos

are trademarks of Sony Corporation.

Type of discs Label on the disc

CD-DA

MP3

WMA

ATRAC CD

For installation and connections, see the

supplied installation/connections manual.

Warning if your car’s ignition has no

ACC position

After turning the ignition off, be sure to press

and hold (OFF) on the unit until the display

disappears.

Otherwise, the display does not turn off and

this causes battery drain.

This label is located on the bottom of the

chassis.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Applicable accessory: Remote commander

Manufactured under license

from BBE Sound, Inc.

The BBE MP process

improves digitally compressed sound, such as

MP3, by restoring and enhancing the higher

harmonics lost through compression. BBE MP

works by generating even-order harmonics from

the source material, effectively recovering

warmth, detail and nuance.

Microsoft, Windows Media,

and the Windows logo are

trademarks or registered

trademarks of Microsoft

Corporation in the United States and/or other

countries.

Table of Contents

Getting Started

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4

Detaching the front panel . . . . . . . . . . . . . . . . . 4

Attaching the front panel . . . . . . . . . . . . . . . 5

Inserting the disc in the unit . . . . . . . . . . . . . . . 5

Ejecting the disc . . . . . . . . . . . . . . . . . . . . . . 5

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Card remote commander RM-X151 . . . . . . . 6

Display items . . . . . . . . . . . . . . . . . . . . . . . . 8

Repeat and shuffle play. . . . . . . . . . . . . . . . . 8

Radio

Storing and receiving stations . . . . . . . . . . . . . . 8

Storing automatically — BTM . . . . . . . . . . . 8

Storing manually. . . . . . . . . . . . . . . . . . . . . . 8

Receiving the stored stations . . . . . . . . . . . . 8

Tuning automatically . . . . . . . . . . . . . . . . . . 8

Other functions

Changing the sound settings . . . . . . . . . . . . . . . 9

Adjusting the sound characteristics . . . . . . . 9

Customizing the equalizer curve

— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Adjusting setup items — SET . . . . . . . . . . . . . 9

Using optional equipment. . . . . . . . . . . . . . . . 10

CD/MD changer . . . . . . . . . . . . . . . . . . . . . 10

Rotary commander RM-X4S . . . . . . . . . . . 11

Auxiliary audio equipment. . . . . . . . . . . . . 11

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 12

About MP3/WMA files . . . . . . . . . . . . . . . 12

About ATRAC CD. . . . . . . . . . . . . . . . . . . 13

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 14

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 14

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 15

Error displays/Messages. . . . . . . . . . . . . . . 16

Getting Started

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel and press the RESET

button with a pointed object, such as a ballpoint

pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until “Clock Adjust” appears.

3 Press (DSPL ) .

The hour indication is selected.

4 Rotate the volume control dial to set

the hour and minute.

To move the digital indication, press (DSPL).

5 Press the select button.

The setup is complete and the clock starts.

With the card remote commander

In step 4, to set the hour and minute, press M or m.

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press (OPEN).

The front panel is flipped down.

3 Slide the front panel to the right, then

gently pull out the left end of the front

panel.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

RESET

button

Attaching the front panel

Place the hole A of the front panel onto the

spindle B on the unit, then lightly push the left

side in.

Press (SOURCE) on the unit (or insert a disc) to

operate the unit.

Note

Do not put anything on the inner surface of the front

panel.

Inserting the disc in the unit

1 Press (OPEN).

2 Insert the disc (label side up).

3 Close the front panel.

Playback starts automatically.

Ejecting the disc

1 Press (OPEN).

2 Press Z.

The disc is ejected.

3 Close the front panel.

Location of controls and basic operations

Main unit

Front panel removed

Card remote commander

RM-X151

Refer to the pages listed for details. The

corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A OFF button

To power off; stop the source.

B Volume control dial/select button 9

To adjust volume (rotate); select setup items

(press and rotate).

C Receptor for the card remote

commander

D BTM button 8

To start the BTM function (press and hold).

E Display window

F DSO button 2

To select the DSO mode (1, 2, 3 or off). The

larger the number, the more enhanced the

effect.

G OPEN button 5

CDX-GT500EE

RESET

ql w;qk

H GP*

/ALBM*

+/– buttons*

To skip groups/albums (press); skip groups/

albums continuously (press and hold).

I SEEK –/+ buttons

CD:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); reverse/fast-

forward a track (press and hold).

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

J DSPL (display) button 8

To change display items.

K SENS button

To improve weak reception: Local/Mono.

L SOURCE button

To power on; change the source (Radio/CD/

MD*

/AUX).

M MODE button 8, 10

To select the radio band (FM/AM)/select the

unit*

N SCRL (scroll) button

To scroll display item.

O Number buttons

CD/MD*

(3): REP 8, 10

(4): SHUF 8, 10

(5): BBE MP*

To activate the BBE MP function, set

“BBE MP on.” To cancel, set “BBE MP

off.”

(6): PAUSE*

To pause playback. To cancel, press

again.

Radio:

To receive stored stations (press); store

stations (press and hold).

P EQ3 (equalizer) button 9

To select an equalizer type (Xplod, Vocal,

Edge, Cruise, Space, Gravity, Custom or

Off).

Q IMAGE button 2

To select the display image.

Movie mode 1-3 t Spectrum analyzer

mode 1-5 t Space Producer mode t Wall

paper mode 1-3 t Normal play/reception

mode

R RESET button 4

S Z (eject) button 5

To eject the disc.

T Disc slot 5

To insert the disc.

The following buttons on the card remote

commander have also different buttons/functions

from the unit.

wa < (.)/, (>) buttons

To control CD/radio, the same as (SEEK)

–/+ on the unit.

ws VOL (volume) +/– button

To adjust volume.

wd ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

wf SEL (select) button

The same as the select button on the unit.

wg M (+)/m (–) buttons

To control CD, the same as (GP/ALBM) +/–

on the unit.

wh Number buttons

To receive stored stations (press); store

stations (press and hold).

*1 When an ATRAC CD is played.

*2 When an MP3/WMA is played.

*3 If the changer is connected, the operation is

different, see page 10.

*4 When an MD changer is connected.

*5 When a CD/MD changer is connected.

*6 When playing back on this unit.

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

Tip

For details on how to replace the battery, see

“Replacing the lithium battery of the card remote

commander” on page 13.

For details on selecting a CD/MD changer, see

page 10.

Display items

Example: when you select the normal play mode

by pressing (IMAGE) repeatedly (page 7).

A Source/MP3/ATRAC3plus/WMA indication

B Clock

C Track number/Elapsed playing time, Disc/

artist name, Album/group number*

, Album/

group name, Track name, Text information*

*1 Album/group number is displayed only when the

album/group is changed.

*2 When playing an MP3, ID3 tag is displayed, when

playing ATRAC CD, text information written by

SonicStage, etc., is displayed, and when playing

WMA, WMA tag is displayed.

To change display items C, press (DSPL);

scroll display items C, press (SCRL) or set

“Auto Scroll on” (page 10).

Tip

Displayed items will differ, depending on the disc type,

recorded format and settings. For details on MP3/

WMA, see page 12; ATRAC CD, see page 13.

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

*1 When an MP3/WMA is played.

*2 When an ATRAC CD is played.

To return to normal play mode, select “Repeat

off” or “Shuffle off.”

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3*, AM1 or AM2.

2 Press and hold (BTM) until “BTM”

flashes.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

* FM3 tuning range is 65 to 74 MHz (at 30KHz step).

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

Tuning automatically

1 Select the band, then press (SEEK) –/+

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK) –/+ to locate the

approximate frequency, then press (SEEK) –/+

repeatedly to fine adjust to the desired frequency

(manual tuning).

Select To play

Repeat Track track repeatedly.

Repeat Album*

album repeatedly.

Repeat Group*

group repeatedly.

Shuffle Album*

album in random order.

Shuffle Group*

group in random order.

Shuffle Disc disc in random order.

Other functions

Changing the sound settings

Adjusting the sound

characteristics

You can adjust the balance, fader, and subwoofer

volume.

1 Press the select button repeatedly

until “Balance,” “Fader” or “Sub

Woofer” appears.

The item changes as follows:

equalizer setting*

Balance (left-right) t

Fader (rear-front) t

Sub Woofer (subwoofer volume)*

AUX Level*

*1 When EQ3 is activated (page 9).

*2 “– ∞” is displayed at the lowest setting, and can

be adjusted up to 20 steps.

*3 When AUX source is activated (page 11).

2 Rotate the volume control dial to

adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

With the card remote commander

In step 2, to adjust the selected item, press <, M, ,

or m.

Customizing the equalizer curve

— EQ3

“Custom” of EQ3 allows you to make your own

equalizer settings.

1 Select a source, then press (EQ3)

repeatedly to select “Custom.”

2 Press the select button repeatedly

until “LOW Center Frequency”

appears.

3 Rotate the volume control dial to

select the desired frequency.

LOW Frequency can be set to 60 Hz or 100

Hz.

4 Push the select button.

5 Rotate the volume control dial to

adjust the volume level.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

6 Push the select button.

Repeat steps 3 to 6 to adjust “MID” and

“HIGH.”

MID and HIGH frequencies differ but are set

in the same way (MID: 500 Hz or 1.0 kHz;

HIGH: 10.0 kHz or 12.5 kHz).

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Tip

Other equalizer types are also adjustable.

With the card remote commander

In step 3 and 5, to adjust the selected item, press <,

M, , or m.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the volume control dial to

select the setting (example “on” or

“off”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

With the card remote commander

In step 3, to select the setting, press < or ,.

continue to next page t

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

* When the unit is turned off.

Using optional equipment

CD/MD changer

Selecting the changer

1 Press (SOURCE) repeatedly until “CD” or

“MD” appears.

2 Press (MODE) repeatedly until the desired

changer appears.

Playback starts.

*1 When an MP3 is played.

*2 When MDLP disc is played.

Skipping albums and discs

1 During playback, press (GP/ALBM) +/–.

Repeat and shuffle play

1 During playback, press (3) (REP) or (4)

(SHUF) repeatedly until the desired setting

appears.

*1 When one or more CD/MD changers are

connected.

*2 When one or more CD changers, or two or more

MD changers are connected.

To return to normal play mode, select “Repeat

off” or “Shuffle off.”

Clock Adjust (page 4)

Beep

To set “on” (

z) or “off.”

Auto Image

Auto Image mode automatically steps (every 10

seconds) through the display images.

– “All” (

z): to step repeatedly through the

display images in all display modes.

– “off”: to not change the image automatically.

– “SA”: to step repeatedly through the display

images of Spectrum analyzer.

– “Movie”: to step repeatedly through the

display images of Movie mode.

Info (Information)

To display the items (depending on the source,

etc.).

– “Simple” (

z): to not display any items.

– “All”: to display all items.

– “Clear”: to have items automatically

disappear.

AUX-Audio*

To turn the AUX source display “on” (

z) or

“off” (page 11).

Dimmer

To change the brightness of the display.

–“Auto” (

z): to dim the display automatically

when you turn lights on.

– “on”: to dim the display.

– “off”: to deactivate the dimmer.

Demo*

(Demonstration)

To set “on” (z) or “off.”

Auto Scroll

To scroll long displayed item automatically

when the disc/album/group/track is changed.

– “on”: to scroll.

– “off” (

z): to not scroll.

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “off”

(

z), “125Hz” or “ 78Hz.”

To skip Press (GP/ALBM)

album and release (hold for a

moment).

album

continuously

within 2 seconds of first

releasing.

discs repeatedly.

discs

continuously

then, press again within 2

seconds and hold.

Select To play

Repeat Disc*

disc repeatedly.

Shuffle

Changer*

tracks in the changer in random

order.

Shuffle All*

tracks in all units in random

order.

Disc/Album number

Unit number, MP3 indication*

LP2/LP4 indication*

Tip

“Shuffle All” will not shuffle tracks between CD units

and MD changers.

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how

you mount the rotary commander.

Location of controls

The corresponding buttons on the rotary

commander control the same functions as those

on this unit.

The following controls on the rotary commander

require a different operation from the unit.

• PRESET/DISC control

The same as (GP/ALBM) +/– on the unit (push

in and rotate).

• VOL (volume) control

The same as the volume control dial on the unit

(rotate).

• SEEK/AMS control

The same as (SEEK) –/+ on the unit (rotate, or

rotate and hold).

Changing the operative direction

The operative direction of the controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

1 While pushing the VOL control, press and

hold (SEL).

Auxiliary audio equipment

You can connect optional Sony portable devices

to the BUS AUDIO IN/AUX IN terminal on the

unit. If the changer or other device is not

connected to the terminal, the unit allows you to

listen to the portable device on your car speakers.

Note

When connecting a portable device, be sure BUS

CONTROL IN is not connected. If a device is

connected to BUS CONTROL IN, “AUX” cannot be

selected by (SOURCE).

Tip

When connecting both a portable device and a

changer, use the optional AUX-IN selector.

Selecting auxiliary equipment

1 Press (SOURCE) repeatedly until “AUX”

appears.

Operate by the portable device itself.

Adjusting the volume level

Be sure to adjust the volume for each connected

audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX”

appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Press the select button repeatedly until

“AUX Level” appears, and rotate the volume

control dial to adjust the input level (±6 dB).

SEL

OFF

ATT

SEL

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET/

DISC

To increase

To decrease

Additional Information

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power aerial will extend automatically while the

unit is operating.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit will

not operate properly. In such a case, remove the disc

and wait for about an hour until the moisture has

evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc magazines

when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a parked car or on a

dashboard/rear tray.

• Do not attach labels, or use discs with sticky ink/

residue. Such discs may stop spinning when used,

causing a malfunction, or may ruin the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from using

such discs:

– Inability to eject a disc (due to a label or sticker

peeling off and jamming the eject mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to heat

shrinking of a sticker or label causing a disc to

warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do not

use such discs.

• You cannot play 8 cm CDs.

• Before playing, clean the discs

with a commercially available

cleaning cloth. Wipe each disc

from the centre out. Do not use

solvents such as benzine,

thinner, commercially available

cleaners, or antistatic spray

intended for analogue discs.

Notes on CD-R/CD-RW discs

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the condition

of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

some record companies. Please be aware that among

those discs, there are some that do not conform to

the CD standard and may not be playable by this

product.

About MP3/WMA files

MP3, which stands for MPEG-1 Audio Layer-3, is a

music file compression format standard. It

compresses audio CD data to approximately 1/10 of

its original size.

WMA, which stands for Windows Media Audio, is

another music file compression format standard. It

compresses audio CD data to approximately 1/22*

of its original size.

* only for 64 kbps

• The unit is compatible with the ISO 9660 level 1/

level 2 format, Joliet/Romeo in the expansion

format, and Multi Session.

• The maximum number of:

– folders (albums): 150 (including root and empty

folders).

– MP3/WMA files (tracks) and folders contained

in a disc: 300 (if a folder/file names contain

many characters, this number may become less

than 300).

– displayable characters for a folder/file name is

32 (Joliet), or 64 (Romeo).

• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to

MP3 only. ID3 tag is 15/30 characters (1.0 and

1.1), or 63/126 characters (2.2, 2.3 and 2.4).

WMA tag is 63 characters.

Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side with

digital audio material on the other side. However,

since the audio material side does not conform to

the Compact Disc (CD) standard, playback on this

product is not guaranteed.

Playback order of MP3/WMA files

Notes

• When naming an MP3 file/WMA file, be sure to add

the file extension “.mp3”/“.wma” to the file name.

• During playback of a VBR (variable bit rate) MP3/

WMA file or fast-forward/reverse, elapsed playing

time may not display accurately.

• When the disc is recorded in Multi Session, only the

first track of the first session format is recognized

and played (any other format is skipped). The

priority of the format is CD-DA, ATRAC CD and

MP3/WMA.

– When the first track is a CD-DA, only CD-DA of the

first session is played.

– When the first track is not a CD-DA, an ATRAC CD

or MP3/WMA session is played. If the disc has no

data in any of these formats, “NO Music” is

displayed.

Notes on MP3

• Be sure to finalize the disc before using on the unit.

• If you play a high-bit-rate MP3, such as 320 kbps,

sound may be intermittent.

Notes on WMA

• Files made with lossless compression are not

playable.

• Files protected by copyright are not playable.

About ATRAC CD

ATRAC3plus format

ATRAC3, which stands for Adaptive Transform

Acoustic Coding3, is audio compression

technology. It compresses audio CD data to

approximately 1/10 of its original size.

ATRAC3plus, which is an extended format of

ATRAC3, compresses the audio CD data to

approximately 1/20 of its original size. The unit

accepts both ATRAC3 and ATRAC3plus format.

ATRAC CD

ATRAC CD is recorded audio CD data which is

compressed to ATRAC3 or ATRAC3plus format

using authorized software, such as SonicStage 2.0 or

later, or SonicStage Simple Burner.

• The maximum number of:

– folders (groups): 255

– files (tracks): 999

• The characters for a folder/file name and text

information written by SonicStage are displayed.

For details on ATRAC CD, see the SonicStage or

SonicStage Simple Burner manual.

Note

Be sure to create the ATRAC CD using authorized

software, such as SonicStage 2.0 or later, or

SonicStage Simple Burner 1.0 or 1.1.

If you have any questions or problems concerning

your unit that are not covered in this manual, consult

your nearest Sony dealer.

Maintenance

Replacing the lithium battery of the

card remote commander

Under normal conditions, the battery will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter. Replace

the battery with a new CR2025 lithium battery. Use

of any other battery may present a risk of fire or

explosion.

Notes on the lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Folder

(album)

MP3/WMA file

(track)

MP3/WMA

continue to next page t

+ side up

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse blows,

check the power connection and

replace the fuse. If the fuse

blows again after replacement,

there may be an internal

malfunction. In such a case,

consult your nearest Sony

dealer.

Cleaning the connectors

The unit may not function properly if the connectors

between the unit and the front panel are not clean. In

order to prevent this, detach the front panel (page 4)

and clean the connectors with a cotton swab dipped

in alcohol. Do not apply too much force. Otherwise,

the connectors may be damaged.

Notes

• For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition

switch.

• Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1 Remove the protection collar.

1 Detach the front panel (page 4).

2 Engage the release keys together with the

protection collar.

3Pull out the release keys to remove the

protection collar.

2 Remove the unit.

1Insert both release keys simultaneously

until they click.

2Pull the release keys to unseat the unit.

3Slide the unit out of the mounting.

Specifications

CD Player section

Signal-to-noise ratio: 120 dB

Frequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

Tuning range:

FM1/FM2: 87.5 – 108.0 MHz (at 50 kHz step)

FM3: 65 – 74 MHz (at 30 kHz step)

Aerial terminal: External aerial connector

Intermediate frequency: 10.7 MHz/450 kHz

Usable sensitivity: 9 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)

Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz

Frequency response: 30 – 15,000 Hz

Fuse (10A)

Main unit Back of the front

panel

Orient the release

keys as shown.

Hook facing

inwards.

Tuning range: 531 – 1,602 kHz

Aerial terminal: External aerial connector

Intermediate frequency: 10.7 MHz/450 kHz

Sensitivity: 30 µV

Power amplifier section

Outputs: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohms

Maximum power output: 52 W × 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front/rear)

Subwoofer output terminal (mono)

Power aerial relay control terminal

Power amplifier control terminal

Inputs:

Telephone ATT control terminal

Illumination control terminal

BUS control input terminal

BUS audio input/AUX IN terminal

Remote controller input terminal

Aerial input terminal

Tone controls:

Low: ±10 dB at 60 Hz or 100 Hz (XPLOD)

Mid: ±10 dB at 500 Hz or 1 kHz (XPLOD)

High: ±10 dB at 10 kHz or 12.5 kHz (XPLOD)

Power requirements: 12 V DC car battery

(negative earth)

Dimensions: Approx. 178 × 50 × 181 mm (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 162 mm

(w/h/d)

Mass: Approx. 1.2 kg

Supplied accessories:

Card remote commander: RM-X151

Parts for installation and connections (1 set)

Optional accessories/equipment:

Rotary commander: RM-X4S

BUS cable (supplied with an RCA pin cord):

RC-61 (1 m), RC-62 (2 m)

CD changer (10 discs): CDX-757MX

MD changer (6 discs): MDX-66XLP

Source selector: XA-C30

AUX-IN selector: XA-300

Your dealer may not handle some of the above listed

accessories. Please ask the dealer for detailed

information.

Note

This unit cannot be connected to a digital preamplifier

or an equalizer which is Sony BUS system compatible.

Design and specifications are subject to change

without notice.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check the

connection and operating procedures.

US and foreign patents licensed from Dolby

Laboratories.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and Thomson.

General

No power is being supplied to the unit.

• Check the connection. If everything is in order, check

the fuse.

• If the unit is turned off and the display disappears, it

cannot be operated with the remote commander.

t Turn on the unit.

The power aerial does not extend.

The power aerial does not have a relay box.

No sound.

• The volume is too low.

• The ATT function is activated, or the Telephone ATT

function (when the interface cable of a car telephone

is connected to the ATT lead) is activated.

• The position of the fader control is not set for a 2-

speaker system.

• The CD changer is incompatible with the disc format

(MP3/WMA/ATRAC CD).

t Play back with a Sony MP3 compatible CD

changer, or this unit.

No beep sound.

• The beep sound is canceled (page 10).

• An optional power amplifier is connected and you are

not using the built-in amplifier.

The contents of the memory have been erased.

• The RESET button has been pressed.

t Store again into the memory.

• The power connecting lead or battery has been

disconnected.

• The power connecting lead is not connected properly.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the ignition

key is switched.

The leads are not matched correctly with the car’s

accessory power connector.

continue to next page t

• Lead-free solder is used for soldering certain parts.

(more than 80 %)

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• VOC (Volatile Organic Compound)-free vegetable

oil based ink is used for printing the carton.

• Packaging cushions do not use polystyrene foam.

Error displays/Messages

The display disappears from/does not appear

in the display window.

• The dimmer is set “Dimmer on” (page 10).

• The display disappears if you press and hold (OFF).

tPress and hold (OFF) on the unit until the

display appears.

• The connectors are dirty (page 14).

DSO does not function.

Depending on the type of car interior or type of music,

DSO may not have a desirable effect.

The images change automatically.

In Auto Image mode, the selected image cannot be

displayed.

t To display selected image only, set to “Auto Image

off” (page 10).

Any display items do not display.

t Set to “Info All” (page 10).

CD/MD playback

The disc cannot be loaded.

• Another disc is already loaded.

• The disc has been forcibly inserted upside down or in

the wrong way.

The disc does not playback.

• Defective or dirty disc.

• The CD-Rs/CD-RWs are not for audio use (page 12).

MP3/WMA files cannot be played back.

The disc is incompatible with the MP3/WMA format

and version (page 12).

MP3/WMA files take longer to play back than

others.

The following discs take a longer time to start

playback.

– a disc recorded with a complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added.

The ATRAC CD cannot play.

• The disc is not created by authorized software, such

as SonicStage or SonicStage Simple Burner.

• Tracks that are not included in the group cannot be

played.

The display items do not scroll.

• For discs with very many characters, those may not

scroll.

• “Auto Scroll” is set to “off.”

tSet “Auto Scroll on” (page 10) or press (SCRL).

The sound skips.

• Installation is not correct.

tInstall the unit at an angle of less than 45° in a

sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.

The disc will not eject.

Press the RESET button (page 4).

“MS” or “MD” does not appear on the source

display when both the optional MGS-X1 and

MD changer are connected.

This unit recognizes MGS-X1 as an MD unit.

t Press (SOURCE) until “MS” or “MD” appears,

then press (MODE) repeatedly.

Radio reception

The stations cannot be received.

The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the power

supply lead of a car’s aerial booster (only when your

car has built-in FM/AM aerial in the rear/side glass).

• Check the connection of the car aerial.

• The auto aerial will not go up.

t Check the connection of the power aerial control

lead.

• Check the frequency.

• When the DSO mode is on, the sound is sometimes

hampered by noises.

t Set the DSO mode to “off” (page 6).

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Press (SENS) until “Local on” appears.

t Tuning does not stop at a station:

Press (SENS) repeatedly until “Mono on” or

“Mono off” (FM), or “Local off” (AM) appears.

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication

flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

t Press (SENS) to set the monaural reception

mode to “Mono on.”

An FM programme broadcast in stereo is heard

in monaural.

The unit is in monaural reception mode.

t Press (SENS) until “Mono off” appears.

Blank*

Tracks have not been recorded on the MD.*

t Play an MD with recorded tracks.

Error*

• The disc is dirty or inserted upside down.*

t Clean or insert the disc correctly.

• A blank disc has been inserted.

• The disc cannot play because of some problem.

t Insert another disc.

Failure (Illuminates until any button is pressed.)

The connection of speakers/amplifiers is incorrect.

t See the installation guide manual of this model to

check the connection.

Load

The changer is loading the disc.

t Wait until loading is complete.

Local Seek +/–

The local seek mode is on during automatic tuning.

*1 If an error occurs during playback of a CD or MD,

the disc number of the CD or MD does not appear

in the display.

*2 The disc number of the disc causing the error

appears in the display.

If these solutions do not help improve the situation,

consult your nearest Sony dealer.

If you take the unit to be repaired because of CD

playback trouble, bring the disc that was used at the

time the problem began.

NO Disc

The disc is not inserted in the CD/MD changer.

tInsert discs in the changer.

NO Disc Name

A disc name is not written in the track.

NO Group Name

A group name is not written in the track.

NO ID3 Tag

ID3 tag information is not written in the MP3 file.

NO Information

Text information is not written in the ATRAC3/

ATRAC3plus or WMA file.

NO Magazine

The disc magazine is not inserted in the CD changer.

tInsert the magazine in the changer.

NO Music

The disc is not a music file.

tInsert a music CD in this unit or MP3 playable

changer.

NO Track Name

A track name is not written in the track.

Not Ready

The lid of the MD changer is open or the MDs are not

inserted properly.

tClose the lid or insert the MDs properly.

Offset

There may be an internal malfunction.

tCheck the connection. If the error indication

remains on in the display, consult your nearest

Sony dealer.

Read

The unit is reading all track and group information on

the disc.

tWait until reading is complete and playback starts

automatically. Depending on the disc structure, it

may take more than a minute.

Push Reset

The CD unit and CD/MD changer cannot be operated

because of some problem.

tPress the RESET button (page 4).

“” or “”

During reverse or fast-forward, you have reached the

beginning or the end of the disc and you cannot go any

further.

“”

The character cannot be displayed with the unit.

Поздравляем с покупкой!

Благодарим Вас за то, что Вы остановили

свой выбор на проигрывателе компакт-

дисков Sony. В поездке Вы сможете

использовать следующие функции

проигрывателя.

• Воспроизведение компакт-дисков

Можно воспроизводить диски CD-DA

(содержащие также CD TEXT*), CD-R/

CD-RW (с файлами MP3/WMA и диски в

формате Multi Session (стр. 14)), а также

компакт-диски ATRAC CD (форматы

ATRAC3 и ATRAC3plus (стр. 15)).

• Прием радиостанций

– Можно хранить в памяти до 6 станций в

каждом диапазоне (FM1, FM2, FM3,

AM1 и AM2).

– BTM (Память оптимальной настройки):

устройство выбирает радиостанции с

наиболее сильным сигналом и

сохраняет их в памяти.

• Настройка звучания

– Параметрический эквалайзер EQ3:

можно выбрать любую из 7

предварительно настроенных кривых

эквалайзера и настроить ее по своему

усмотрению.

– DSO (Dynamic Soundstage Organizer -

функция динамического звучания):

создает более объемное звуковое поле

с помощью синтеза виртуальных

громкоговорителей для улучшения

качества их звучания, даже если они

установлены в нижней части двери.

– BBE MP: улучшает качество сжатого

цифрового звука, например MP3.

• Настройка изображения

На устройстве можно выбрать

различные изображения.

– Режим Space Producer: создает на экране

движущиеся изображения в такт

воспроизводимой музыки.

• Использование дополнительного

устройства

Кроме воспроизведения на данном

устройстве, можно также управлять

дополнительными проигрывателями

компакт-/мини-дисков и

дополнительными портативными

устройствами Sony.

* Диск с CD TEXT - это компакт-диск CD-DA,

содержащий такую информацию, как название

компакт-диска, имя исполнителя и названия

композиций.

Тип диска Метка на диске

CD-DA

MP3

WMA

ATRAC C D

Проигрыватель компакт-

дисков с диапазоном FM/AM

Сдепано в Таиланде

Содержание

Начало работы

Сброс параметров устройства . . . . . . . . . . 4

Установка часов . . . . . . . . . . . . . . . . . . . . . . 4

Снятие передней панели . . . . . . . . . . . . . . . 4

Установка передней панели . . . . . . . . . . 5

Установка диска в устройство . . . . . . . . . . 5

Извлечение диска . . . . . . . . . . . . . . . . . . . 5

Расположение органов

управления и основные

операции

Основное устройство . . . . . . . . . . . . . . . . 6

Пульт дистанционного управления

RM-X151 . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Компакт-диск

Надписи на дисплее . . . . . . . . . . . . . . . . . 8

Повторное и перетасованное

воспроизведение . . . . . . . . . . . . . . . . . . . . 8

Радиоприемник

Сохранение и прием радиостанций . . . . . . 9

Автоматическое сохранение

— BTM (Память оптимальной

настройки) . . . . . . . . . . . . . . . . . . . . . . . . . 9

Сохранение вручную . . . . . . . . . . . . . . . . 9

Прием радиостанций, сохраненных в

памяти . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Автоматическая настройка . . . . . . . . . . 9

Другие функции

Изменение настроек звука . . . . . . . . . . . . 10

Настройка характеристик звука. . . . . 10

Настройка кривой эквалайзера

— EQ3. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Настройка параметров установки

— SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Использование дополнительного

оборудования. . . . . . . . . . . . . . . . . . . . . . . . 11

Проигрыватель компакт-/

мини-дисков. . . . . . . . . . . . . . . . . . . . . . . 11

Поворотный дистанционный

переключатель RM-X4S. . . . . . . . . . . . 12

Вспомогательное

аудиооборудование . . . . . . . . . . . . . . . . 13

Дополнительная информация

Меры предосторожности . . . . . . . . . . . . . 13

Примечания относительно компакт-

дисков . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

О файлах MP3/WMA . . . . . . . . . . . . . . 14

О компакт-дисках ATRAC CD. . . . . . 15

Уход за устройством . . . . . . . . . . . . . . . . . 16

Извлечение устройства . . . . . . . . . . . . . . . 17

Технические характеристики. . . . . . . . . . 17

Поиск и устранение неисправностей . . . 18

Индикация/сообщения об

ошибках . . . . . . . . . . . . . . . . . . . . . . . . . . 20

SonicStage и ее логотип являются

товарными знаками корпорации Sony.

ATRAC, ATRAC3, ATRAC3plus и их

логотипы являются товарными знаками

корпорации Sony

Начало работы

Сброс параметров

устройства

Перед первым включением устройства

или после замены автомобильного

аккумулятора, а также после изменения

схемы подключения следует сбросить

параметры устройства.

Снимите переднюю панель и нажмите

кнопку RESET с помощью заостренного

предмета, например шариковой ручки.

Примечание

При нажатии кнопки RESET выполняется

стирание установок времени и некоторых других

занесенных в память параметров.

Установка часов

Часы данного устройства имеют 24-

часовую индикацию.

1 Нажмите и удерживайте кнопку

выбора.

Отобразится дисплей установок.

2 Нажимайте кнопку выбора, пока не

появится индикация “Clock Adjust”.

3 Нажмите кнопку (DSPL).

Замигает индикация часа.

4 Поверните регулятор громкости

для установки значения часов и

минут.

Чтобы переместить индикацию,

нажмите кнопку (DSPL).

5 Нажмите кнопку выбора.

Установка завершена, и часы начинают

отсчет времени.

При использовании пульта дистанционного

управления

Чтобы установить значения часов и минут в шаге

4, нажмите кнопку M или m.

Снятие передней панели

Во избежание кражи устройства можно

снять с него переднюю панель.

Предупреждающий сигнал

Если до поворота ключа зажигания в

положение OFF с устройства не была

снята передняя панель, то в течение

нескольких секунд будет слышен

предупреждающий звуковой сигнал.

Звуковой сигнал будет слышен только в

том случае, если используется встроенный

усилитель.

1 Нажмите кнопку (OFF).

Устройство выключится.

2 Нажмите кнопку (OPEN).

Панель откроется.

3 Сдвиньте переднюю панель вправо

и снимите ее, слегка потянув на

себя левый край.

Примечания

• Старайтесь не ронять переднюю панель. Не

надавливайте слишком сильно на переднюю

панель и окошко дисплея.

• Не подвергайте переднюю панель воздействию

тепла/высокой температуры или влажности.

Старайтесь не оставлять его в припаркованной

машине или на приборной доске/полочке за

задним сиденьем.

Кнопка

RESET

Страница загружается ...

Sony CDX-GT500EE Инструкция по применению

Бренд: Sony

Модель: CDX-GT500EE

Категория: Мультимедиа-приемники для автомобилей

Тип: Инструкция по применению

Скачать PDF

сообщить о нарушении

на других языках

English: Sony CDX-GT500EE Owner's manual

Sony CDX-GT500EE Инструкция по применению

Sony CDX-GT500EE Инструкция по применению

на других языках

Похожие модели бренда